Document Center List of Standards on Anaesthetic, Respiratory And Reanimation Equipment Including Medical Gas Installations
ICS Code 11.040.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-B819 - Standard Specification for Seamless Copper Tube for Medical Gas Systems
- ASTM-F1101 - Standard Specification for Ventilators Intended for Use During Anesthesia (Withdrawn 2012)
- ASTM-F1204 - Standard Specification for Anesthesia Reservoir Bags (Withdrawn 2002)
- ASTM-F1205 - Standard Specification for Anesthesia Breathing Tubes (Withdrawn 2008)
- ASTM-F1208 - Standard Specification for Minimum Performance and Safety Requirements for Anesthesia Breathing Systems (Withdrawn 2014)
- ASTM-F1218 - Standard Specification for Bronchoscopes (Rigid) (Withdrawn 2023)
- ASTM-F1242 - Standard Specification for Cuffed and Uncuffed Tracheal Tubes (Withdrawn 2002)
- ASTM-F1243 - Standard Specification for Tracheal Tube Connectors (Withdrawn 2002)
- ASTM-F1343 - Standard Specification for Anesthetic Gas Scavenging Systems-Transfer and Receiving Systems (Withdrawn 2011)
- ASTM-F1452 - Standard Specification for Minimum Performance and Safety Requirements for Anesthetic Gas Monitors
- ASTM-F1456 - Standard Specification for Minimum Performance and Safety Requirements for Capnometers
- ASTM-F1462 - Standard Specification for Oxygen Analyzers (Withdrawn 2002)
- ASTM-F1463 - Standard Specification for Alarm Signals in Medical Equipment Used in Anesthesia and Respiratory Care (Withdrawn 2006)
- ASTM-F1464 - Standard Specification for Oxygen Concentrators for Domiciliary Use (Withdrawn 2014)
- ASTM-F1497 - Standard Test Method for Determining Laser Resistance of the Shaft of Tracheal Tubes (Withdrawn 2008)
- ASTM-F1573 - Standard Specification for Anesthetic Equipment-Oropharyngeal and Nasopharyngeal Airways (Withdrawn 2009)
- ASTM-F1590 - Standard Specification for Tracheostomy Tube Connectors (Withdrawn 2003)
- ASTM-F1627 - Standard Specification for Tracheostomy Tubes-Pediatric Tracheostomy Tubes (Withdrawn 2003)
- ASTM-F1628 - Standard Specification for Labeling and Marking of Cuffed and Uncuffed Tracheal Tubes and Related Treatments Intended for Use During Laser Surgery (Withdrawn 2008)
- ASTM-F1666 - Standard Specification for Adult Tracheostomy Tubes (Withdrawn 2003)
- ASTM-F1690 - Standard Specification for Humidifiers for Medical Use—Part 1: General Requirements for Active Humidification Systems (Withdrawn 2013)
- ASTM-F1850 - Standard Specification for Particular Requirements for Anesthesia Workstations and Their Components (Withdrawn 2014)
- ASTM-F1949 - Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles
- ASTM-F2002 - Standard Terminology Relating to Anesthesia and Respiratory Equipment (Withdrawn 2002)
- ASTM-F2560 - Standard Specification for Supralaryngeal Airways and Connectors
- ASTM-F2726 - Standard specification for fixation devices for tracheal tubes and other airway devices
- ASTM-F896 - Standard Specification for Flexible Fiberoptic Bronchoscopes (Withdrawn 2001)
- ASTM-F920 - Standard Specification for Minimum Performance and Safety Requirements for Resuscitators Intended for Use With Humans (Withdrawn 2007)
- ASTM-F954 - Specification for Respiratory Home Care (Withdrawn 1997)
- ASTM-F965 - Standard Specification for Rigid Laryngoscopes for Tracheal Intubation-Hook-On Fittings for Laryngoscope Handles and Blades with Lamps (Withdrawn 2008)
- ASTM-G175 - Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications
- ASTM-G88 - Standard Guide for Designing Systems for Oxygen Service
- ASTM-PS127 - Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications (Withdrawn 2003)
BSI:
- 21/30438039 - BS EN ISO 81060-3.2. Non-invasive sphygmomanometers - Part 3. Clinical investigation of continuous automated measurement type
- BS-341-2 - Transportable gas container valves
- BS-3487-4 - Tracheal tubes
- BS-4272-1 - Anaesthetic and analgesic machines
- BS-4272-2 - Anaesthetic and analgesic machines
- BS-4272-3 - Anaesthetic and analgesic machines. Specification for continuous flow anaesthetic machines
- BS-5682 - Dimensions of probes and terminal units for medical gas supply systems. Requirements
- BS-5724-2.119 - Medical electrical equipment. Particular requirements for safety. Specification for baby incubators
- BS-5724-2.120 - Medical electrical equipment. Particular requirements for safety. Specification for transport incubators
- BS-5724-2-2.120 - Medical electrical equipment. Particular requirements for safety
- BS-5724-2-2.20 - Medical electrical equipment. Particular requirements for safety
- BS-5724-2.23 - Medical electrical equipment. Particular requirements for safety. Specification for oxygen concentrators
- BS-5724-3.12 - Medical electrical equipment. Particular requirements for performance
- BS-6151 - Specification for breathing tubes for use with anaesthetic apparatus and ventilators
- BS-6850 - Gas powered ventilatory resuscitators
- BS-7143 - Specification for Catheter mounts (flexible adaptors) for use with medical breathing systems
- BS-7618-1 - Alarm signals for anaesthesia and respiratory care. Specification for visual alarm signals
- BS-7734 - Specification for Anaesthetic Circle Breathing Systems
- BS-8447 - Anaesthetic and respiratory equipment. Hook-on fittings for the attachment of vaporizers to an anaesthetic gas delivery device
- BS-8468-1 - Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents
- BS-8468-3-1 - Respiratory Protective Devices for Use Against Chemical, Biological, Radiological & Nu
- BS-EN-12022 - Blood-gas exchangers
- BS-EN-12181 - Oropharyngeal airways
- BS-EN-12342 - Breathing tubes intended for use with anaesthetic apparatus and ventilators
- BS-EN-12598 - Oxygen Monitors for Patient Breathing Mixtures, Particular Rquirements
- BS-EN-1280-1 - Agent specific filling systems for anaesthetic vaporizers
- BS-EN-1281-1 - Anaesthetic and respiratory equipment. Conical connectors. Cones and sockets
- BS-EN-1281-2 - Part 2: Screw-Threaded, Weight-Bearing Connectors, Anaesthetic & Respiratory Equipment
- BS-EN-1282-1 - Anaesthetic & Respiratory Equipment, Tracheostomy Tubes, Tubes for Use in Adults
- BS-EN-1282-2 - Tracheostomy tubes
- BS-EN-13014 - Connections for gas sampling tubes to anaesthetic and respiratory equipment
- BS-EN-13220 - Flow-metering devices for connection to terminal units of medical gas pipeline systems
- BS-EN-13221 - High-pressure flexible connections for use with medical gases
- BS-EN-13328-1 - Part 1: Salt Test Method To Assess Filtration Performance, Breathing System Filters Fo
- BS-EN-13348 - Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum
- BS-EN-13348-TC - Tracked Changes. Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum
- BS-EN-13544-1 - Respiratory therapy equipment
- BS-EN-13544-2 - Respiratory therapy equipment
- BS-EN-13544-3 - Respiratory therapy equipment
- BS-EN-13826 - Peak expiratory flow meters
- BS-EN-13976-1 - Rescue systems. Transportation of incubators
- BS-EN-13976-1-TC - Tracked Changes. Rescue systems. Transportation of incubators
- BS-EN-13976-2 - Rescue systems. Transportation of incubators
- BS-EN-13976-2-TC - Tracked Changes. Rescue systems. Transportation of incubators
- BS-EN-15546-1 - Small Bore Connectors for Liquids & Gases in Healthcare Applications, General Requirem
- BS-EN-15908 - Anaesthetic and respiratory equipment. Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
- BS-EN-1782 - Tracheal tubes and connectors
- BS-EN-1820 - Anaesthetic reservoir bags
- BS-EN-475 - Medical devices. Electrically-generated alarm signals
- BS-EN-540 - Clinical Investigation of Medical Devices for Human Subjects
- BS-EN-60601-1-10 - Medical electrical equipment
- BS-EN-60601-2-10 - Medical electrical equipment
- BS-EN-60601-2-12 - Medical electrical equipment
- BS-EN-60601-2-13 - Medical electrical equipment
- BS-EN-60601-2-19 - Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant incubators
- BS-EN-60601-2-20 - Medical electrical equipment
- BS-EN-60601-2-21 - Medical electrical equipment
- BS-EN-60601-2-4 - Medical electrical equipment
- BS-EN-737-1 - Part 1: Terminal Units for Compressed Medical Gases & Vacuum, Medical Gas Pipeline Systems
- BS-EN-737-3 - Medical gas pipeline systems
- BS-EN-737-4 - Part 4: Terminal Units for Anaesthetic Gas Scavenging Systems, Medical Gas Pipeline System
- BS-EN-738-1 - Part 1: Pressure Regulators & Pressure Regulators With Flowmetering Devices, Pressure Reg
- BS-EN-738-3 - Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves
- BS-EN-738-4 - Part 4: Low-Pressure Regulators Intended for Incorporation Into Medical Equipment, Pressur
- BS-EN-739 - Low-pressure hose assemblies for use with medical gases
- BS-EN-740 - Anaesthetic Workstations & Their Modules, Particular Requirements
- BS-EN-794-1 - Particular Requirements for Critical Care Ventilators - Lung Ventilators
- BS-EN-794-2 - Lung ventilators. Particular requirements for home care use
- BS-EN-794-3 - Lung ventilators
- BS-EN-80100 - Basic Safety & Essential Performance Requirements of Clinical Thermometer for Body Tem
- BS-EN-850 - Transportable Gas Cylinders - Pin-Index, Yoke-Type Valve Outlet Connections for Medical Us
- BS-EN-IEC-60601-2-19 - Medical electrical equipment
- BS-EN-IEC-60601-2-19-TC - Tracked Changes. Medical electrical equipment
- BS-EN-IEC-60601-2-20 - Medical electrical equipment
- BS-EN-IEC-60601-2-21 - Medical electrical equipment
- BS-EN-IEC-60601-2-21-TC - Tracked Changes. Medical electrical equipment
- BS-EN-ISO-10079-1 - Medical suction equipment
- BS-EN-ISO-10079-1-TC - Tracked Changes. Medical suction equipment
- BS-EN-ISO-10079-2 - Medical suction equipment
- BS-EN-ISO-10079-3 - Medical suction equipment
- BS-EN-ISO-10079-3-TC - Tracked Changes. Medical suction equipment
- BS-EN-ISO-10079-4 - Medical suction equipment
- BS-EN-ISO-10524-1 - Pressure regulators for use with medical gases
- BS-EN-ISO-10524-2 - Pressure regulators for use with medical gases
- BS-EN-ISO-10524-3 - Pressure regulators for use with medical gases
- BS-EN-ISO-10524-4 - Pressure regulators for use with medical gases
- BS-EN-ISO-10651-2 - Lung ventilators for medical use. Particular requirements for basic safety and essential performance
- BS-EN-ISO-10651-4 - Lung ventilators
- BS-EN-ISO-10651-4-TC - Tracked Changes. Lung ventilators
- BS-EN-ISO-10651-6 - Lung ventilators for medical use. Particular requirements for basic safety and essential performance
- BS-EN-ISO-11117 - Gas cylinders. Valve protection caps and guards. Design, construction and tests
- BS-EN-ISO-11196 - Anaesthetic Gas Monitors
- BS-EN-ISO-11197 - Medical supply units
- BS-EN-ISO-11499 - Dentistry. Single-use cartridges for local anaesthetics
- BS-EN-ISO-11990 - Lasers and laser-related equipment. Determination of laser resistance of tracheal tube shaft and tracheal cuffs
- BS-EN-ISO-11990-1 - Lasers and laser-related equipment. Determination of laser resistance of tracheal tubes
- BS-EN-ISO-11990-2 - Lasers and laser-related equipment. Determination of laser resistance of tracheal tubes
- BS-EN-ISO-14408 - Tracheal tubes designed for laser surgery. Requirements for marking and accompanying information
- BS-EN-ISO-15001 - Anaesthetic and respiratory equipment. Compatibility with oxygen
- BS-EN-ISO-15002 - Flow control devices for connection to a medical gas supply system
- BS-EN-ISO-15002-TC - Tracked Changes. Flow control devices for connection to a medical gas supply system
- BS-EN-ISO-16571 - Systems for evacuation of plume generated by medical devices
- BS-EN-ISO-16628 - Anaesthetic and respiratory equipment. Tracheobronchial tubes
- BS-EN-ISO-16628-TC - Tracked Changes. Anaesthetic and respiratory equipment. Tracheobronchial tubes
- BS-EN-ISO-17510-1 - Sleep apnoea breathing therapy
- BS-EN-ISO-17510-2 - Sleep apnoea breathing therapy
- BS-EN-ISO-18082 - Anaesthetic and respiratory equipment. Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
- BS-EN-ISO-18562-1-TC - Tracked Changes. Biocompatibility evaluation of breathing gas pathways in healthcare applications
- BS-EN-ISO-18562-2 - Biocompatibility evaluation of breathing gas pathways in healthcare applications
- BS-EN-ISO-18562-2-TC - Tracked Changes. Biocompatibility evaluation of breathing gas pathways in healthcare applications
- BS-EN-ISO-18562-3 - Biocompatibility evaluation of breathing gas pathways in healthcare applications
- BS-EN-ISO-18562-4 - Biocompatibility evaluation of breathing gas pathways in healthcare applications
- BS-EN-ISO-18562-4-TC - Tracked Changes. Biocompatibility evaluation of breathing gas pathways in healthcare applications
- BS-EN-ISO-18778 - Respiratory equipment. Particular requirements for basic safety and essential performance of infant cardiorespiratory monitors
- BS-EN-ISO-18778-TC - Tracked Changes. Respiratory equipment. Particular requirements for basic safety and essential performance of infant cardiorespiratory monitors
- BS-EN-ISO-18779 - Medical devices for conserving oxygen and oxygen mixtures. Particular requirements
- BS-EN-ISO-19223 - Lung ventilators and related equipment. Vocabulary and semantics
- BS-EN-ISO-20072 - Aerosol drug delivery device design verification. Requirements and test methods
- BS-EN-ISO-20789 - Anaesthetic and respiratory equipment. Passive humidifiers
- BS-EN-ISO-21647 - Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas monitors
- BS-EN-ISO-21969 - High-pressure flexible connections for use with medical gas systems
- BS-EN-ISO-23328-1 - Breathing system filters for anaesthetic and respiratory use
- BS-EN-ISO-23328-2 - Breathing system filters for anaesthetic and respiratory use
- BS-EN-ISO-23368 - Anaesthetic and respiratory equipment. Low-flow nasal cannulae for oxygen therapy
- BS-EN-ISO-23371 - Anaesthetic and respiratory equipment. Cuff pressure indication, control and regulation devices
- BS-EN-ISO-23372 - Anaesthetic and respiratory equipment. Air entrainment devices
- BS-EN-ISO-23372-TC - Tracked Changes. Anaesthetic and respiratory equipment. Air entrainment devices
- BS-EN-ISO-23747 - Anaesthetic and respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
- BS-EN-ISO-23747-TC - Tracked Changes. Anaesthetic and respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
- BS-EN-ISO-26782 - Anaesthetic and respiratory equipment. Spirometers intended for the measurement of time forced expired volumes in humans
- BS-EN-ISO-26825 - Anaesthetic and respiratory equipment. User-applied labels for syringes containing drugs used during anaesthesia. Colours, design and performance
- BS-EN-ISO-26825-TC - Tracked Changes. Anaesthetic and respiratory equipment. User-applied labels for syringes containing drugs used during anaesthesia. Colours, design and performance
- BS-EN-ISO-27427 - Anaesthetic and respiratory equipment. Nebulizing systems and components
- BS-EN-ISO-407 - Small medical gas cylinders. Pin-index yoke-type valve connection
- BS-EN-ISO-407-TC - Tracked Changes. Small medical gas cylinders. Pin-index yoke-type valve connections
- BS-EN-ISO-4135 - Anaesthetic and respiratory equipment. Vocabulary
- BS-EN-ISO-4135-TC - Tracked Changes. Anaesthetic and respiratory equipment. Vocabulary
- BS-EN-ISO-5356-1 - Anaesthetic and respiratory equipment. Conical connectors
- BS-EN-ISO-5356-1-TC - Tracked Changes. Anaesthetic and respiratory equipment. Conical connectors
- BS-EN-ISO-5356-2 - Anaesthetic and respiratory equipment. Conical connectors
- BS-EN-ISO-5359 - Anaesthetic and respiratory equipment. Low-pressure hose assemblies for use with medical gases
- BS-EN-ISO-5360 - Anaesthetic vaporizers. Agent-specific filling systems
- BS-EN-ISO-5360-TC - Tracked Changes. Anaesthetic vaporizers. Agent-specific filling systems
- BS-EN-ISO-5361 - Anaesthetic and respiratory equipment. Tracheal tubes and connectors
- BS-EN-ISO-5361-TC - Tracked Changes. Anaesthetic and respiratory equipment. Tracheal tubes and connectors
- BS-EN-ISO-5362 - Anaesthetic and respiratory equipment. Anaesthetic reservoir bags
- BS-EN-ISO-5364 - Anaesthetic and respiratory equipment. Oropharyngeal airways
- BS-EN-ISO-5364-TC - Tracked Changes. Anaesthetic and respiratory equipment. Oropharyngeal airways
- BS-EN-ISO-5366 - Anaesthetic and respiratory equipment. Tracheostomy tubes and connectors
- BS-EN-ISO-5366-1 - Anaesthetic and respiratory equipment. Tracheostomy tubes
- BS-EN-ISO-5366-TC - Tracked Changes. Anaesthetic and respiratory equipment. Tracheostomy tubes and connectors
- BS-EN-ISO-5367 - Anaesthetic and respiratory equipment. Breathing sets and connectors
- BS-EN-ISO-7376 - Anaesthetic and respiratory equipment. Laryngoscopesfor tracheal intubation
- BS-EN-ISO-7396-1 - Medical gas pipeline systems
- BS-EN-ISO-7396-1-TC - Medical gas pipeline systems
- BS-EN-ISO-7396-2 - Medical gas pipeline systems
- BS-EN-ISO-80369-1-TC - Tracked Changes. Small-bore connectors for liquids and gases in healthcare applications
- BS-EN-ISO-80369-2 - Small-bore connectors for liquids and gases in healthcare applications
- BS-EN-ISO-80601-2-12 - Medical electrical equipment
- BS-EN-ISO-80601-2-12-TC - Tracked Changes. Medical electrical equipment
- BS-EN-ISO-80601-2-13 - Medical electrical equipment
- BS-EN-ISO-80601-2-13-TC - Tracked Changes. Medical electrical equipment
- BS-EN-ISO-80601-2-55 - Medical electrical equipment
- BS-EN-ISO-80601-2-61 - Medical electrical equipment
- BS-EN-ISO-80601-2-67 - Medical electrical equipment
- BS-EN-ISO-80601-2-69 - Medical electrical equipment
- BS-EN-ISO-80601-2-70 - Medical electrical equipment
- BS-EN-ISO-80601-2-72 - Medical electrical equipment
- BS-EN-ISO-80601-2-72-TC - Tracked Changes. Medical electrical equipment
- BS-EN-ISO-80601-2-74 - Medical electrical equipment
- BS-EN-ISO-80601-2-74-TC - Tracked Changes. Medical electrical equipment
- BS-EN-ISO-80601-2-84 - Medical electrical equipment.Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment.
- BS-EN-ISO-80601-2-85 - Medical electrical equipment
- BS-EN-ISO-80601-2-87 - Medical electrical equipment
- BS-EN-ISO-80601-2-90 - Medical electrical equipment
- BS-EN-ISO-81060-1 - Non-invasive sphygmomanometers
- BS-EN-ISO-81060-2 - Non-invasive sphygmomanometers
- BS-EN-ISO-81060-3 - Non-invasive sphygmomanometers
- BS-EN-ISO-8185 - Respiratory tract humidifiers for medical use. Particular requirements for respiratory humidification systems
- BS-EN-ISO-8359 - Oxygen concentrators for medical use. Safety requirements
- BS-EN-ISO-8835-2 - Inhalational anaesthesia systems
- BS-EN-ISO-8835-3 - Inhalational anaesthesia systems. Transfer and receiving systems of active anaesthetic gas scavenging systems
- BS-EN-ISO-8835-4 - Inhalational anaesthesia systems
- BS-EN-ISO-8835-5 - Inhalational anaesthesia systems
- BS-EN-ISO-8836 - Suction catheters for use in the respiratory tract
- BS-EN-ISO-9170-1 - Terminal units for medical gas pipeline systems
- BS-EN-ISO-9170-2 - Terminal units for medical gas pipeline systems
- BS-EN-ISO-9360-1 - Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans
- BS-EN-ISO-9360-2 - Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans
- BS-EN-ISO-9703-3 - Anaesthetic and respiratory care alarm signals. Guidance on application of alarms
- BS-EN-ISO-9919 - Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use
- BS-ISO-10651-5 - Lung ventilators for medical use. Particular requirements for basic safety and essential performance
- BS-ISO-11040-1 - Prefilled syringes
- BS-ISO-11040-3 - Prefilled syringes
- BS-ISO-11195-TC - Tracked Changes. Gas mixers for medical use. Stand-alone gas mixers
- BS-ISO-11197 - Medical supply units
- BS-ISO-11712 - Anaesthetic and respiratory equipment. Supralaryngeal airways and connectors
- BS-ISO-11712-TC - Tracked Changes. Anaesthetic and respiratory equipment. Supralaryngeal airways and connectors.
- BS-ISO-16571 - Systems for evacuation of plume generated by medical devices
- BS-ISO-16628 - Tracheobronchial tubes. Sizing and marking
- BS-ISO-17256 - Anaesthetic and respiratory equipment. Respiratory therapy tubing and connectors
- BS-ISO-18190 - Anaesthetic and respiratory equipment. General requirements for airways and related equipment
- BS-ISO-18562-1 - Biocompatibility evaluation of breathing gas pathways in healthcare applications
- BS-ISO-18562-2 - Biocompatibility evaluation of breathing gas pathways in healthcare applications
- BS-ISO-18562-3 - Biocompatibility evaluation of breathing gas pathways in healthcare applications
- BS-ISO-18562-4 - Biocompatibility evaluation of breathing gas pathways in healthcare applications
- BS-ISO-18835 - Inhalational anaesthesia systems. Draw-over anaesthetic systems
- BS-ISO-18835-TC - Tracked Changes. Inhalational anaesthesia systems. Draw-over anaesthetic systems
- BS-ISO-19211 - Anaesthetic and respiratory equipment. Fire-activated oxygen shut-off devices for use during oxygen therapy
- BS-ISO-19223 - Lung ventilators and related equipment. Vocabulary and semantics
- BS-ISO-20789 - Anaesthetic and respiratory equipment. Passive humidifiers
- BS-ISO-21917 - Anaesthetic and respiratory equipment. Voice prostheses
- BS-ISO-26825 - Anaesthetic and respiratory equipment. User-applied labels for syringes containing drugs used during anaesthesia. Colours, design and performance
- BS-ISO-27427 - Anaesthetic and respiratory equipment. Nebulizing systems and components
- BS-ISO-80601-2-79 - Medical electrical equipment
- BS-ISO-80601-2-80 - Medical electrical equipment
- BS-ISO-80601-2-84 - Medical electrical equipment
- BS-ISO-81060-1 - Non-Invasive Sphygmomanometers - Part 1: Requirements And Test Methods For Non-Automated Measurement Type (ISO 81060-1:2007)
- BS-ISO-81060-2 - Non-invasive sphygmomanometers. Clinical investigation of automated measurement type
- BS-N-3 - Specification for gaseous breathing oxygen supplies
- DD-CEN-14507-1 - Inhalational nitric oxide systems
- DD-ENV-737-6 - Medical gas pipeline systems
- DD-ISO-16628 - Tracheobronchial Tubes, Recommendations for Size Designation & Labelling
- DD-ISO-18835 - Inhalational anaesthesia systems. Draw-over vaporizers and associated equipment
- PD-CR-13903 - General guidance on the equipment used for inhaled nitric oxide therapy
- PD-ISO-21954 - Guidance on the selection of the appropriate means of ventilation based on the intended patient, use environment, and operator
- PD-ISO-81060-5 - Non-invasive sphygmomanometers
IEC:
- IEC-1288-1 - Cardiac defibrillators - Cardiac defibrillator-monitors - Part 1: Operation
- IEC-1288-2 - Cardiac defibrillators - Cardiac defibrillators-monitors - Part 2: Maintenance
- IEC-60601-2-12 - Medical electrical equipment -- Part 2-12: Particular requirements for the safety of lung ventilators -- Critical care ventilators
- IEC-60601-2-13 - Part 2-13: Particular Requirements for the Safety & Essential Performance of Anaesthetic S
- IEC-60601-2-13-1 - Amendment 1: Medical Electrical Equipment - Part 2-13: Particular Requirements for The
- IEC-60601-2-19 - Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
- IEC-60601-2-19-AM1 - Amendment 1 - Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
- IEC-60601-2-19-RL - Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
- IEC-60601-2-20 - Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
- IEC-60601-2-20-AM1 - Amendment 1 - Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
- IEC-60601-2-20-RL - Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
- IEC-60601-2-21 - Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
- IEC-60601-2-21-AM1 - Amendment 1 - Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
- IEC-60601-2-21-RL - Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
- IEC-60601-2-4 - Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
- IEC-60601-2-4-AM1 - Amendment 1 - Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
- IEC-80601-2-30 - Medical electrical equipment - Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanometers
- ISO-80601-2-30 - Medical electrical equipment -- Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanometers
ISO:
- ISO-10079-1 - Medical suction equipment - Part 1: Electrically powered suction equipment
- ISO-10079-1-AM1 - - Amendment 1: Changes to requirements for operating at extremes of temperature
- ISO-10079-2 - Medical suction equipment - Part 2: Manually powered suction equipment
- ISO-10079-3 - Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source
- ISO-10079-4 - Medical suction equipment - Part 4: General requirements
- ISO-10083 - Oxygen concentrator supply systems for use with medical gas pipeline systems
- ISO-10524 - Corrigendum
- ISO-10524-1 - Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices
- ISO-10524-1-AM1 - - Amendment 1: Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices - Amendment 1
- ISO-10524-2 - Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
- ISO-10524-3 - Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs)
- ISO-10524-3-AM1 - - Amendment 1: Filtration and information to be supplied by the manufacturer
- ISO-10524-4 - Pressure regulators for use with medical gases - Part 4: Low-pressure regulators
- ISO-10651-1 - Part 2-12: Particular Requirements for the Safety of Lung Ventilators - Critical Care Vent
- ISO-10651-2 - Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients
- ISO-10651-3 - Lung ventilators for medical use -- Part 3: Particular requirements for emergency and transport ventilators
- ISO-10651-4 - Lung ventilators - Part 4: Particular requirements for user-powered resuscitators
- ISO-10651-5 - Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 5: Gas-powered emergency resuscitators
- ISO-10651-6 - Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices
- ISO-11040-1 - Prefilled syringes - Part 1: Glass cylinders for dental local anaesthetic cartridges
- ISO-11040-2 - Prefilled syringes - Part 2: Plunger stoppers for dental local anaesthetic cartridges
- ISO-11040-3 - Prefilled syringes - Part 3: Seals for dental local anaesthetic cartridges
- ISO-11117 - Gas cylinders - Valve protection caps and guards - Design, construction and tests
- ISO-11195 - Gas mixers for medical use - Stand-alone gas mixers
- ISO-11196 - Corrigendum
- ISO-11197 - Medical supply units
- ISO-11499 - Dentistry - Single-use cartridges for local anaesthetics
- ISO-11712 - Anaesthetic and respiratory equipment - Supralaryngeal airways and connectors
- ISO-11990 - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shaft and tracheal tube cuffs
- ISO-11990-1 - Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 1: Tracheal tube shaft
- ISO-11990-2 - Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 2: Tracheal tube cuffs
- ISO-14408 - Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
- ISO-15001 - Anaesthetic and respiratory equipment - Compatibility with oxygen
- ISO-15002 - Flow control devices for connection to a medical gas supply system
- ISO-15002-AM1 - - Amendment 1
- ISO-16571 - Systems for evacuation of plume generated by medical devices
- ISO-16628 - Anaesthetic and respiratory equipment - Tracheobronchial tubes
- ISO-17256 - Anaesthetic and respiratory equipment - Respiratory therapy tubing and connectors
- ISO-17510 - Medical devices - Sleep apnoea breathing therapy - Masks and application accessories
- ISO-17510-1 - Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy equipment
- ISO-17510-2 - Sleep apnoea breathing therapy - Part 2: Masks and application accessories
- ISO-18082 - Anaesthetic and respiratory equipment - Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
- ISO-18082-AM1 - - Amendment 1
- ISO-18190 - Anaesthetic and respiratory equipment - General requirements for airways and related equipment
- ISO-18192-2 - Implants for surgery - Wear of total intervertebral spinal disc prostheses - Part 2: Nucleus replacements
- ISO-18562-1 - Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 1: Evaluation and testing within a risk management process
- ISO-18562-2 - Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter
- ISO-18562-3 - Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 3: Tests for emissions of volatile organic substances
- ISO-18562-4 - Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 4: Tests for leachables in condensate
- ISO-18778 - Respiratory equipment - Particular requirements for basic safety and essential performance of infant cardiorespiratory monitors
- ISO-18779 - Medical devices for conserving oxygen and oxygen mixtures - Particular requirements
- ISO-18835 - Inhalational anaesthesia systems - Draw-over anaesthetic systems
- ISO-19223 - Lung ventilators and related equipment - Vocabulary and semantics
- ISO-20072 - Aerosol drug delivery device design verification - Requirements and test methods
- ISO-20789 - Anaesthetic and respiratory equipment - Passive humidifiers
- ISO-21647 - Corrigendum
- ISO-21917 - Anaesthetic and respiratory equipment - Voice prostheses
- ISO-21954 - Guidance on the selection of the appropriate means of ventilation based on the intended patient, use environment, and operator
- ISO-21969 - High-pressure flexible connections for use with medical gas systems
- ISO-23328-1 - Breathing system filters for anaesthetic and respiratory use -- Part 1: Salt test method to assess filtration performance
- ISO-23328-2 - Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects
- ISO-23368 - Anaesthetic and respiratory equipment - Low-flow nasal cannulae for oxygen therapy
- ISO-23371 - Anaesthetic and respiratory equipment - Cuff pressure indication, control and regulation devices
- ISO-23372 - Anaesthetic and respiratory equipment - Air entrainment devices
- ISO-23747 - Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
- ISO-26782 - Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time forced expired volumes in humans
- ISO-26825 - Anaesthetic and respiratory equipment - User-applied labels for syringes containing drugs used during anaesthesia - Colours, design and performance
- ISO-27427 - Anaesthetic and respiratory equipment - Nebulizing systems and components
- ISO-32 - Gas cylinders for medical use - Marking for identification of content
- ISO-407 - Small medical gas cylinders - Pin-index yoke-type valve connections
- ISO-4135 - Anaesthetic and respiratory equipment - Vocabulary
- ISO-5356-1 - Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
- ISO-5356-1-1 - Amendment 1: Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
- ISO-5356-2 - Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors
- ISO-5356-2-AM1 - - Amendment 1
- ISO-5358 - Anaesthetic machines for use with humans
- ISO-5359 - Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases
- ISO-5359-AM1 - - Amendment 1
- ISO-5360 - Anaesthetic vaporizers - Agent-specific filling systems
- ISO-5361 - Anaesthetic and respiratory equipment - Tracheal tubes and connectors
- ISO-5361-1 - Tracheal Tubes - Part 1: General Requirements
- ISO-5361-4 - Tracheal tubes -- Part 4: Cole type
- ISO-5362 - Anaesthetic and respiratory equipment . Anaesthetic reservoir bags
- ISO-5364 - Anaesthetic and respiratory equipment - Oropharyngeal airways
- ISO-5366 - Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors
- ISO-5366-1 - Anaesthetic and respiratory equipment -- Tracheostomy tubes -- Part 1: Tubes and connectors for use in adults
- ISO-5366-2 - Part 2: Basic Requirements for Tubes for Adults, Tracheostomy Tubes -
- ISO-5366-3 - Tracheostomy tubes - Part 3: Paediatric tracheostomy tubes - Corrigendum
- ISO-5367 - Anaesthetic and respiratory equipment - Breathing sets and connectors
- ISO-5834-4 - Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 4: Oxidation index measurement method
- ISO-7376 - Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation
- ISO-7376-3 - Part 3: Fibre-Illuminated Re-Usable Rigid Laryngoscopes, Laryngoscopic Fittings
- ISO-7396 - Non-flammable medical gas pipeline systems
- ISO-7396-1 - Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
- ISO-7396-1-A1 - Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 1: Requirements for terminal units for vacuum fitted on medical supply units with operator-adjustable portions and connected to the pipeline through flexible hoses
- ISO-7396-1-A2 - Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 2
- ISO-7396-1-AM1 - - Amendment 1
- ISO-7396-1-AM3 - - Amendment 3: Terminology relating to alarm systems
- ISO-7396-2 - Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems
- ISO-7767 - Oxygen monitors for monitoring patient breathing mixtures -- Safety requirements
- ISO-80369-1 - Small-bore connectors for liquids and gases in healthcare applications - Part 1: General requirements
- ISO-80369-2 - Small-bore connectors for liquids and gases in healthcare applications - Part 2: Connectors for respiratory applications
- ISO-80369-20 - Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods
- ISO-80369 PACKAGE - ISO 80369 - Liquids and Gases Small Bore Connectors Package
- ISO-80601-2-12 - Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
- ISO-80601-2-13 - Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation
- ISO-80601-2-13-AM1 - - Amendment 1
- ISO-80601-2-13-AM2 - - Amendment 2
- ISO-80601-2-55 - Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
- ISO-80601-2-55-AM1 - - Amendment 1: Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors - Amendment 1
- ISO-80601-2-55 FRENC - Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
- ISO-80601-2-55-FRENC - Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
- ISO-80601-2-61 - Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
- ISO-80601-2-67 - Medical electrical equipment - Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment
- ISO-80601-2-69 - Medical electrical equipment - Part 2-69: Particular requirements for the basic safety and essential performance of oxygen concentrator equipment
- ISO-80601-2-70 - Medical electrical equipment - Part 2-70: Particular requirements for the basic safety and essential performance of sleep apnoea breathing therapy equipment
- ISO-80601-2-72 - Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
- ISO-80601-2-74 - Medical electrical equipment - Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment
- ISO-80601-2-79 - Medical electrical equipment - Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment
- ISO-80601-2-80 - Medical electrical equipment - Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency
- ISO-80601-2-84 - Medical electrical equipment - Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment
- ISO-80601-2-85 - Medical electrical equipment - Part 2-85: Particular requirements for the basic safety and essential performance of cerebral tissue oximeter equipment
- ISO-80601-2-87 - Medical electrical equipment - Part 2-87: Particular requirements for basic safety and essential performance of high-frequency ventilators
- ISO-80601-2-90 - Medical electrical equipment - Part 2-90: Particular requirements for basic safety and essential performance of respiratory high-flow therapy equipment
- ISO-81060-1 - Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type
- ISO-81060-2 - Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type
- ISO-81060-2-AM1 - - Amendment 1
- ISO-81060-2-AM2 - - Amendment 2: Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type - Amendment 2
- ISO-81060-3 - Non-invasive sphygmomanometers - Part 3: Clinical investigation of continuous automated measurement type
- ISO-81060-5 - Non-invasive sphygmomanometers - Part 5: Requirements for the repeatability and reproducibility of NIBP simulators for testing of automated non-invasive sphygmomanometers
- ISO-8185 - Respiratory tract humidifiers for medical use - Particular requirements for respiratory humidification systems
- ISO-8359 - Oxygen concentrators for medical use -- Safety requirements
- ISO-8359-AM1 - Oxygen concentrators for medical use - Safety requirements - Amendment 1
- ISO-8382 - Resuscitators intended for use with humans
- ISO-8835-2 - Inhalational anaesthesia systems - Part 2: Anaesthetic breathing systems
- ISO-8835-3 - Part 3: Transfer & Receiving Systems of Active Anaesthetic Gas Scavenging Systems, Inh
- ISO-8835-3-AM1 - Inhalational anaesthesia systems - Part 3: Anaesthetic gas scavenging systems - Transfer and receiving systemsAmendment 1
- ISO-8835-4 - Inhalational anaesthesia systems - Part 4: Anaesthetic vapour delivery devices
- ISO-8835-5 - Inhalational anaesthesia systems - Part 5: Anaesthetic ventilators
- ISO-8835-7 - Inhalational anaesthesia systems - Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases
- ISO-8836 - Suction catheters for use in the respiratory tract
- ISO-9170-1 - Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum
- ISO-9170-2 - Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems
- ISO-9360 - Anaesthetic & Respiratory Equipment - Heat & Moisture Exchangers for Use in Humidifying Re
- ISO-9360-1 - Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml
- ISO-9360-2 - Anaesthetic and respiratory equipment -- Heat and moisture exchangers (HMEs) for humidifying respired gases in humans -- Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
- ISO-9703-1 - Anaesthesia and respiratory care alarm signals -- Part 1: Visual alarm signals
- ISO-9703-2 - Anaesthesia and respiratory care alarm signals -- Part 2: Auditory alarm signals
- ISO-9703-3 - Anaesthesia and respiratory care alarm signals -- Part 3: Guidance on application of alarms
- ISO-9918 - Capnometers for use with humans -- Requirements
- ISO-9919 - Medical electrical equipment - Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use
- ISO/DIS-10079-4 - Medical suction equipment - Part 4: General requirements
Other SDOs:
- AAMI/IEC-60601-2-4 - Medical electrical equipment - Part 2-4: Particular requirements for basic safety and essential performance of cardiac defibrillators.
- AAMI/ISO-10079-1 - Medical Suction Equipment - Part I: Electrically Powered Suction Equipment - Safety Requirements
- AAMI/ISO-10079-2 - Medical Suction Equipment - Part 2: Manually Powered Suction Equipment
- AAMI/ISO-10079-3 - Medical Suction Equipment - Part 3: Suction Equipment Powered from a Vacuum or Pressure Source
- AAMI/ISO-10651-4 - Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators
- AAMI/ISO-10651-5 - Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 5: Gas-powered emergency Resuscitators
- AAMI/ISO-11195 - Gas Mixers for Medical Use-Stand-alone Gas Mixers
- AAMI/ISO-14408 - Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
- AAMI/ISO-4135 - Anaesthetic and Respiratory Equipment - Vocabulary
- AAMI/ISO-5356-1 - Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
- AAMI/ISO-5361 - Anaesthetic and Respiratory Equipment - Tracheal Tubes and Connectors
- AAMI/ISO-5362 - Anaesthetic Reservoir Bags
- AAMI/ISO-5364 - Anaesthetic and respiratory equipment - Oropharyngeal airways
- AAMI/ISO-5366-1 - Anaesthetic and Respiratory Equipment - Tracheostomy Tubes - Part 1: Tubes and Connectors for Use in Adults
- AAMI/ISO-5366-3 - Anaesthetic and Respiratory Equipment - Tracheostomy Tubes -ยก Part 3: Paediatric Tracheostomy Tubes
- AAMI/ISO-80369-1 - Small bore connectors for liquids and gases in healthcare applications - Part 1: General requirements.
- BS-EN-ISO-5362-TC - Tracked Changes. Anaesthetic and respiratory equipment. Anaesthetic reservoir bags
- DIN-EN-1282-2 - Part 2: Paediatric Tubes, Tracheostomy Tubes
- DIN-EN-13544-1 - Part 1: Nebulizing Systems and Their Components, Respiratory Therapy Equipment
- DIN-EN-13544-2 - Part 2: Tubing and Connectors, Respiratory Therapy Equipment
- DIN-EN-13826 - Peak expiratory flow meters; German version EN 13826:2003
- DIN-EN-13976-1 - Rescue systems - Transportation of incubators - Part 1: Interface conditions
- DIN-EN-13976-2 - Part 2: System Requirements, Rescue Systems - Transportationof Incubators
- DIN-EN-1733 - Suction catheters for use in the respiratory tract; German version EN 1733:2002
- DIN-EN-1820 - Anaesthetic Reservoir Bags
- DIN-EN-794-3/A1 - Lung Ventilators, Part 3: Particular Requirements for Emergency & Transport Ventilator
- DIN-EN-ISO-10079-1 - Medical suction equipment - Part 1: Electrically powered suction equipment
- DIN-EN-ISO-10079-2 - Medical suction equipment - Part 2: Manually powered suction equipment
- DIN-EN-ISO-10079-3 - Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source
- DIN-EN-ISO-10524-1 - Part 1: Pressure Regulators & Pressure Regulators With Flow-Metering Devices, Pressure
- DIN-EN-ISO-10524-2 - Part 2: Manifold & Line Pressure Regulators, Pressure Regulators for Use With Medical
- DIN-EN-ISO-10524-3 - Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005 + Amd 1:2013)
- DIN-EN-ISO-10651-2 - Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients
- DIN-EN-ISO-10651-4 - Part 4: Particular Requirements for Operator-Powered Resuscitators, Lung Ventilators
- DIN-EN-ISO-10651-6 - Part 6: Home-Care Ventilatory Support Devices, Lung Ventilators for Medical Use - Part
- DIN-EN-ISO-11990 - Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts
- DIN-EN-ISO-14408 - Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
- DIN-EN-ISO-15001 - Anaesthetic and respiratory equipment - Compatibility with oxygen
- DIN-EN-ISO-17510-1 - Part 1: Sleep Apnoea Breathing Therapy Equipment, Sleep Apnoea Breathing Therapy
- DIN-EN-ISO-17510-2 - Part 2: Masks & Application Accessories, Sleep Apnoea Breathing Therapy
- DIN-EN-ISO-18777 - Transportable Liquid Oxygen Systems for Medical Use - Particular Requirements
- DIN-EN-ISO-18779 - Medical Devices for Conserving Oxygen & Oxygen Mixtures, Particular Requirements
- DIN-EN-ISO-21969 - High-Pressure Flexible Connections for Use With Medical Gas Systems
- DIN-EN-ISO-407 - Small Medical Gas Cylinders, Pin-Index Yoke-Type Valve Connections
- DIN-EN-ISO-5356-1 - Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
- DIN-EN-ISO-5366-1 - Part 1: Tubes and Connectors for Use in Adults, Anaesthetic and Respiratory Equipment - T
- DIN-EN-ISO-7376 - Anaesthetic & Respiratory Equipment - Laryngoscopes for Tracheal Intubation
- DIN-EN-ISO-7396-1 - Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
- DIN-EN-ISO-7396-2 - Part 2: Anaesthetic Gas Scavenging Disposal Systems, Medical Gas Pipeline Systems
- DIN-EN-ISO-8835-4 - Part 4: Anaesthetic Vapour Delivery Devices, Inhalational Anaesthesia Systems
- DIN-EN-ISO-8835-5 - Part 5: Anaesthetic Ventilators, Inhalational Anaesthesia Systems
- DIN-EN-ISO-9360-2 - Part 2: Hmes for Use With Tracheostomized Patients Having Minimum Tidal Volumes of 250
- EN-12342 - Breathing Tubes Intended for Use With Anaesthetic Apparatus & Ventilators
- EN-1281-2 - Part 2: Screw-Threaded Weight-Bearing Connectors, Anaesthetic & Respiratory Equipment
- EN-1282-2 - Tracheostomy Tubes, Paediatric Tubes
- EN-13014 - Connections for Gas Sampling Tubes To Anaesthetic & Respiratory Equipment
- EN-13220 - Flow Metering Devices for Connection To Terminal Units of Medical Gas Pipeline Systems
- EN-13221 - High-Pressure Flexible Connections for Use With Medical Gases
- EN-13348 - Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum
- EN-13544-1 - Part 1: Nebulizing Systems & Their Components, Respiratory Therapy Equipment
- EN-13544-2 - Part 2: Tubing & Connectors, Respiratory Therapy Equipment
- EN-13976-1 - Rescue systems - Transportation of incubators - Part 1: Interface conditions
- EN-13976-2 - Rescue systems - Transportation of incubators - Part 2: System requirements
- EN-15546-1 - Small Bore Connectors for Liquids & Gases in Healthcare Applications, General Requirem
- EN-1782 - Tracheal Tubes & Connectors
- EN-1820 - Anaesthetic Reservoir Bags
- EN-540 - Clinical Investigation of Medical Devices for Human Subjects
- EN-60601-1-10 - Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers
- EN-60601-2-12 - Medical Electrical Equipment, Particular Requirements for the Safety of Lung Ventilato
- EN-60601-2-13 - Medical Electrical Equipment, Particular Requirements for the Safety & Essential Perfo
- EN-60601-2-19 - Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
- EN-60601-2-20 - Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
- EN-60601-2-21 - Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
- EN-60601-2-4 - Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
- EN-737-3 - Part 3: Pipelines for Compressed Medical Gases & Vacuum, Medical Gas Pipeline Systems
- EN-738-1 - Part 1: Pressure Regulators & Pressure Regulators With Flow Metering Devices, Pressur
- EN-738-3 - Part 3: Pressure Regulators Integrated With Cylinder Valves, Pressure Regulators for U
- EN-794-3 - Part 3: Particular Requirements for Emergency & Transport Ventilators, Medical Electri
- EN-794-3/A1 - Lung Ventilators, Part 3: Particular Requirements for Emergency & Transport Ventilator
- EN-ISO-10079-1 - Medical suction equipment - Part 1: Electrically powered suction equipment - Safety requirements (ISO 10079-1:1999)
- EN-ISO-10079-2 - Medical suction equipment - Part 2: Manually powered suction equipment
- EN-ISO-10079-3 - Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014)
- EN-ISO-10524-1 - Part 1: Pressure Regulators & Pressure Regulators With Flow-Metering Devices, Rpessure
- EN-ISO-10524-2 - Pressure Regulators for Use With Medical Gases, Manifold & Line Pressure Regulators
- EN-ISO-10524-3 - Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves - Amendment 1: Filtration and information to be supplied by the manufacturer (ISO 10524-3:2005/Amd 1:2013)
- EN-ISO-10524-4 - Pressure Regulators for Use With Medical Gases, Low-Pressure Regulators
- EN-ISO-10651-2 - Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients
- EN-ISO-10651-4 - Part 4: Particular Requirements for Operator-Powered Resuscitators, Lung Ventilators
- EN-ISO-10651-6 - Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices
- EN-ISO-11117 - Gas Cylinders, Valve Protection Caps & Valve Guards, Design, Construction & Tests
- EN-ISO-11197 - Medical supply units
- EN-ISO-11499 - Dentistry - Single-use cartridges for local anaesthetics
- EN-ISO-11990-1 - Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 1: Tracheal tube shaft
- EN-ISO-11990-2 - Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 2: Tracheal tube cuffs
- EN-ISO-14408 - Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
- EN-ISO-15002 - Flow-Metering Devices for Connection To Terminal Units of Medical Gas Pipeline Systems
- EN-ISO-17510-1 - Part 1: Sleep Apnoea Breathing Therapy Equipment, Sleep Apnoea Breathing Therapy
- EN-ISO-17510-2 - Part 2: Masks & Application Accessories, Sleep Apnoea Breathing Therapy
- EN-ISO-18082 - Anaesthetic and respiratory equipment - Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases (ISO 18082:2014)
- EN-ISO-18778 - Respiratory Equipment - Infant Monitors - Particular Requirements
- EN-ISO-18779 - Medical Devices for Conserving Oxygen & Oxygen Mixtures, Particular Requirements
- EN-ISO-1938-1 - Medical suction equipment - Part 1: Electrically powered suction equipment
- EN-ISO-20072 - Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009)
- EN-ISO-21647 - Medical Electrical Equipment, Particular Requirements for the Basic Safety & Essential
- EN-ISO-21969 - High-Pressure Flexible Connections for Use With Medical Gas Systems
- EN-ISO-23328-1 - Breathing System Filters for Anaesthetic & Respiratory Use, Salt Test Method To Asses
- EN-ISO-23328-2 - Part 2: Non-Filtration Aspects, Breathing System Filters for Anaesthetic & Respiratory
- EN-ISO-23747 - Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
- EN-ISO-26782 - Anaesthetic & Respiratory Equipment - Spirometers Intended for the Measurement of Time
- EN-ISO-407 - Small Medical Gas Cylinders, Pin-Index Yoke-Type Valve Connections
- EN-ISO-5356-1 - Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
- EN-ISO-5356-2 - Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:2012)
- EN-ISO-5359 - Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases
- EN-ISO-5360 - Anaesthetic vaporizers - Agent-specific filling systems
- EN-ISO-5361 - Anaesthetic and respiratory equipment - Tracheal tubes and connectors
- EN-ISO-5364 - Anaesthetic and respiratory equipment - Oropharyngeal airways
- EN-ISO-5366 - Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors
- EN-ISO-5366-1 - Anaesthetic and respiratory equipment. Tracheostomy tubes. Tubes and connectors for use in adults
- EN-ISO-5367 - Anaesthetic and respiratory equipment - Breathing sets and connectors
- EN-ISO-7376 - Anaesthetic & Respiratory Equipment - Laryngoscopes for Tracheal Intubation
- EN-ISO-7396-1 - Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
- EN-ISO-7396-2 - Part 2: Anaesthetic Gas Scavenging Disposal Systems, Medical Gas Pipeline Systems
- EN-ISO-80369-1 - Small bore connectors for liquids and gases in healthcare applications - Part 1: General requirements
- EN-ISO-80601-2-12 - Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
- EN-ISO-80601-2-55 - Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 80601-2-55:2011)
- EN-ISO-80601-2-61 - Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
- EN-ISO-80601-2-69 - Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014)
- EN-ISO-80601-2-72 - Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
- EN-ISO-81060-1 - Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type (ISO 81060-1:2007)
- EN-ISO-8185 - Respiratory Tract Humidifiers for Meidcal Use - Particular Requirements for Respirator
- EN-ISO-8359 - Oxygen Concentrators for Medical Use - Safety Requirements
- EN-ISO-8835-2 - Part 2: Anaesthetic Beathing Systems, Inhalational Anaesthesia
- EN-ISO-8835-3 - Inhalational anaesthesia systems - Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems (ISO 8835-3:2007)
- EN-ISO-8835-4 - Part 4: Anaesthetic Vapour Delivery Devices, Inhalational Anaesthesia Systems
- EN-ISO-8835-5 - Inhalational Anaesthesia Systems, Anaesthesia Ventilators
- EN-ISO-8836 - Suction catheters for use in the respiratory tract
- EN-ISO-9170-1 - Part 1: Terminal Units for Use With Compressed Medical Gases & Vauum, Terminal Units F
- EN-ISO-9170-2 - Part 2: Terminal Units for Anaesthetic Gas Scavenging Systems, Terminal Units for Medi
- EN-ISO-9360-1 - Part 1: Hmes for Use With Minimum Tidal Volumes of 250 ml, Anaesthetic & Respiratory E
- EN-ISO-9360-2 - Part 2: Hmes for Use With Tracheostomized Patients Having Minimum Tidal Volumes of 250
- EN-ISO-9919 - Medical Electrical Equipment, Particular Requirements for the Basic Safety & Essential
- SIS-CEN/CR-13903 - General guidance on the equipment used for inhaled nitric oxide therapy
- SIS-CEN/TS-14507-1 - Inhalational nitric oxide systems - Part 1: Delivery systems
- SIS-CEN/TS-14507-2 - Inhalational nitric oxide systems - Part 2: Supply systems
- SIS-EN-ISO-10079-1 - Medical suction equipment - Part 1: Electrically powered suction equipment (ISO 10079-1:2015)
- SIS-EN-ISO-10079-2 - Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:2014)
- SIS-EN-ISO-10079-3 - Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014)
- SS-8745710 - Humidifiers for medical use - Safety requirements
- SS-8745720 - Lung ventilators
- SS-8752409 - Anaesthetic reservoir bags
- SS-8752420 - Tracheostomy tubes - Connectors
- SS-8752425 - Oropharyngeal airways
- SS-EN-10244-1 - Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles
- SS-EN-12022 - Blood gas exchangers
- SS-EN-12181 - Oropharyngeal airways
- SS-EN-12342 - Breathing tubes intended for use with anaesthetic apparatus and ventilators
- SS-EN-12598 - Oxygen monitors for patient breathing mixtures - Particular requirements
- SS-EN-12697-11 - Bituminous mixtures - Test methods - Part 11: Determination of the affinity between aggregate and bitumen
- SS-EN-1280-1 - Agent specific filling systems for anaesthetic vaporizers - Part 1: Rectangular keyed filling systems
- SS-EN-1280-1-AM1 - Agent specific filling systems for anaesthetic vaporizers - Part 1: Rectangular keyed filling systems
- SS-EN-1281-1 - Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
- SS-EN-1281-1-AM1 - Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
- SS-EN-1281-2 - Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:1987 modified)
- SS-EN-1282-1 - Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 1: Tubes for use in adults
- SS-EN-1282-2 - Tracheostomy tubes - Part 2: Paediatric tubes (ISO 5366-3:2001, modified)
- SS-EN-13001-1 - Cranes - General design - Part 1: General principles and requirements
- SS-EN-13014 - Connections for gas sampling tubes to anaesthetic and respiratory equipment
- SS-EN-13220 - Flow-metering devices for connection to terminal units of medical gas pipeline systems
- SS-EN-13221 - High-pressure flexible connections for use with medical gases
- SS-EN-13328-1 - Breathing systems filters for anaesthetic and respiratory use - Part 1: Salt test method to assess filtration performance
- SS-EN-13328-2 - Breathing systems filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects
- SS-EN-13328-2-AM1 - Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects
- SS-EN-13544-1 - Respiratory therapy equipment - Part 1: Nebulizing systems and their components
- SS-EN-13544-1-AM1 - Respiratory therapy equipment - Part 1: Nebulizing systems and their components
- SS-EN-13544-2+A1 - Respiratory therapy equipment - Part 2: Tubing and connectors
- SS-EN-13544-3 - Respiratory therapy equipment - Part 3: Air entrainment devices
- SS-EN-13826 - Peak expiratory flow meters
- SS-EN-13976-1 - Rescue systems - Transportation of incubators - Part 1: Interface requirements
- SS-EN-13976-2 - Rescue systems - Transportation of incubators - Part 2: System requirements
- SS-EN-1495 - Lifting platforms - Mast climbing work platforms
- SS-EN-15333-1 - Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 1: Demand apparatus
- SS-EN-15546-1 - Small bore connectors for liquids and gases in healthcare applications - Part 1: General Requirements
- SS-EN-15908 - Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
- SS-EN-17250 - Foodstuffs - Determination of ochratoxin A in spices, liquorice, cocoa and cocoa products by IAC clean-up and HPLC-FLD
- SS-EN-1733 - Suction catheters for use in the respiratory tract
- SS-EN-17339 - Transportable gas cylinders - Fully wrapped carbon composite cylinders and tubes for hydrogen
- SS-EN-1782 - Tracheal tubes and connectors
- SS-EN-1819 - Laryngscopes for tracheal intubation - Particularrequirements
- SS-EN-1820 - Anaesthetic reservoir bags (ISO 5362:2000, modified)
- SS-EN-1990 - Eurocode - Basis of structural and geotechnical design
- SS-EN-475 - Medical devices - Electrically-generated alarm signals
- SS-EN-60601-2-4 - Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
- SS-EN-62353 - Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
- SS-EN-62366-1 - Medical devices - Part 1: Application of usability engineering to medical devices
- SS-EN-737-1 - Medical gas pipeline systems - Part 1: Terminal units for compressed medical gases and vacuum
- SS-EN-737-2 - Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems - Basic requirements
- SS-EN-737-2-AM1 - Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems - Basic requirements
- SS-EN-737-4 - Medical gas pipeline systems - Part 4: Terminal units for anaesthetic gas scavening systems
- SS-EN-738-1 - Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow metering devices
- SS-EN-738-1-AM1 - Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow metering devices
- SS-EN-738-2 - Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
- SS-EN-738-3 - Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
- SS-EN-738-3-AM1 - Pressure regulators for use with medical gases - Part 3: Pressure regulators integraterad with cylinder valves
- SS-EN-738-4 - Pressure regulators for use with medical gases - Part 4: Low-pressure regulators intended for incorporation into medical equipment
- SS-EN-738-4-AM1 - Pressure regulators for use with medical gases - Part 4: Low-pressure regulators intended for incorporation into medical equipment
- SS-EN-739 - Low-pressure hose assemblies for use with medicalgases
- SS-EN-739-AM1 - Low-pressure hose assemblies for use with medical gases
- SS-EN-740 - Anaesthetic workstations and their modules - Particular requirements
- SS-EN-740-AM1 - Anaesthetic workstations and their modules - Particular requirements
- SS-EN-794-1 - Lung ventilators - Part 1: Particular requirements for critical care ventilators
- SS-EN-794-1-AM1 - Lung ventilators - Part 1: Particular requirements for critical care ventilators
- SS-EN-794-2 - Lung ventilators - Part 2: Particular requirements for home care use
- SS-EN-794-3 - Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators
- SS-EN-794-3-AM1 - Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators
- SS-EN-864 - Medical electrical equipment - Capnometers for use with humans - Particular requirements
- SS-EN-865 - Pulse oximeters - Particular requirements
- SS-EN-ISO-10079-1-AM1 - Medical suction equipment - Part 1: Electrically powered suction equipment - Amendment 1: Changes to requirements for operating at extremes of temperature (ISO 10079-1:2015/Amd 1:2018)
- SS-EN-ISO-10079-2 - Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:2022)
- SS-EN-ISO-10079-3 - Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2022)
- SS-EN-ISO-10079-4 - Medical suction equipment - Part 4: General requirements (ISO 10079-4:2021)
- SS-EN-ISO-10524-1 - Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018)
- SS-EN-ISO-10524-2 - Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2018)
- SS-EN-ISO-10524-3 - Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO 10524-3:2019)
- SS-EN-ISO-10524-3-AM1 - Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves - Amendment 1: Filtration and information to be supplied by the manufacturer (ISO 10524-3:2005/Amd 1:2013)
- SS-EN-ISO-10524-4 - Pressure regulators for use with medical gases - Part 4: Lowpressure regulators (ISO 10524-4:2008)
- SS-EN-ISO-10651-2 - Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients (ISO 10651-2:2004)
- SS-EN-ISO-10651-4 - Lung ventilators - Part 4: Particular requirements for user-powered resuscitators (ISO 10651-4:2023)
- SS-EN-ISO-10651-5 - Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 5: Gas-powered emergency resuscitators (ISO 10651-5:2006)
- SS-EN-ISO-10651-6 - Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices (ISO 10651-6:2004)
- SS-EN-ISO-11117 - Gas cylinders - Valve protection caps and guards - Design, construction and tests (ISO 11117:2019)
- SS-EN-ISO-11196 - Anaesthetic gas monitors (ISO 11196:1995, including Technical Corrigendum 1:1997)
- SS-EN-ISO-11197 - Medical supply units (ISO 11197:2019)
- SS-EN-ISO-11499 - Dentistry - Single-use cartridges for local anaesthetics (ISO 11499:2014)
- SS-EN-ISO-11990 - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shaft and tracheal cuffs (ISO 11990:2018)
- SS-EN-ISO-11990-1 - Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 1: Tracheal tube shaft (ISO 11990-1:2011)
- SS-EN-ISO-11990-2 - Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 2: Tracheal tube cuffs (ISO 11990-2:2010)
- SS-EN-ISO-14408 - Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information (ISO 14408:2016)
- SS-EN-ISO-15001 - Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010)
- SS-EN-ISO-15002 - Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008)
- SS-EN-ISO-15002-AM1 - Flow-metering devices for connection to terminal units of medical gas pipeline systems - Amendment 1 (ISO 15002:2008/Amd 1:2018)
- SS-EN-ISO-16628 - Anaesthetic and respiratory equipment - Tracheobronchial tubes (ISO 16628:2022)
- SS-EN-ISO-17510 - Medical devices - Sleep apnoea breathing therapy - Masks and application accessories (ISO 17510:2015)
- SS-EN-ISO-17510-1 - Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy equipment (ISO 17510-1:2007)
- SS-EN-ISO-17510-2 - Sleep apnoea breathing therapy - Part 2: Masks and application accessories (ISO 17510-2:2007)
- SS-EN-ISO-18082 - Anaesthetic and respiratory equipment - Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases (ISO 18082:2014)
- SS-EN-ISO-18082-AM1 - Anaesthetic and respiratory equipment - Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases - Amendment 1 (ISO 18082:2014/Amd 1:2017)
- SS-EN-ISO-18562-1 - Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 1: Evaluation and testing within a risk management process (ISO 18562-1:2017)
- SS-EN-ISO-18562-2 - Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO 18562-2:2017)
- SS-EN-ISO-18562-3 - Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 3: Tests for emissions of volatile organic compounds (VOCs) (ISO 18562-3:2017)
- SS-EN-ISO-18562-4 - Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 4: Tests for leachables in condensate (ISO 18562-4:2017)
- SS-EN-ISO-18777 - Transportable liquid oxygen systems for medical use - Particular requirements (ISO 18777:2005)
- SS-EN-ISO-18778 - Respiratory equipment - Particular requirements for basic safety and essential performance of infant cardiorespiratory monitors (ISO 18778:2022)
- SS-EN-ISO-18779 - Medical devices for conserving oxygen and oxygen mixtures - Particular requirements (ISO 18779:2005)
- SS-EN-ISO-19223 - Lung ventilators and related equipment - Vocabulary and semantics (ISO 19223:2019)
- SS-EN-ISO-20072 - Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009)
- SS-EN-ISO-20789 - Anaesthetic and respiratory equipment - Passive humidifiers (ISO 20789:2018)
- SS-EN-ISO-21647 - Medical electrical equipment - Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 21647:2004 incl. Cor 1:2005)
- SS-EN-ISO-21917 - Anaesthetic and respiratory equipment - Voice prostheses(ISO 21917:2021)
- SS-EN-ISO-21969 - High-pressure flexible connections for use with medical gas systems (ISO 21969:2009)
- SS-EN-ISO-23328-1 - Breathing system filters for anaesthetic and respiratory use - Part 1: Salt test method to assess filtration performance (ISO 23328-1:2003)
- SS-EN-ISO-23328-2 - Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects (ISO 23328-2:2002)
- SS-EN-ISO-23368 - Anaesthetic and respiratory equipment - Low-flow nasal cannulae for oxygen therapy (ISO 23368:2022)
- SS-EN-ISO-23371 - Anaesthetic and respiratory equipment - Cuff pressure indication, control and regulation devices (ISO 23371:2022)
- SS-EN-ISO-23372 - Anaesthetic and respiratory equipment - Air entrainment devices (ISO 23372:2022)
- SS-EN-ISO-23747 - Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2015)
- SS-EN-ISO-26782 - Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time forced expired volumes in humans (ISO 26782:2009)
- SS-EN-ISO-26825 - Anaesthetic and respiratory equipment - User-applied labels for syringes containing drugs used during anaesthesia - Colours, design and performance (ISO 26825:2020)
- SS-EN-ISO-27427 - Anaesthetic and respiratory equipment - Nebulizing systems and components (ISO 27427:2023)
- SS-EN-ISO-407 - Small medical gas cylinders - Pin-index yoke-type valve connections (ISO 407:2023)
- SS-EN-ISO-4135 - Anaesthetic and respiratory equipment - Vocabulary (ISO 4135:2022)
- SS-EN-ISO-5356-1 - Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2015)
- SS-EN-ISO-5356-2 - Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:2012)
- SS-EN-ISO-5356-2-AM1 - Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors - Amendment 1 (ISO 5356-2:2012/Amd 1:2019)
- SS-EN-ISO-5359 - Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases (ISO 5359:2014)
- SS-EN-ISO-5360 - Anaesthetic vaporizers - Agent-specific filling systems (ISO 5360:2016)
- SS-EN-ISO-5361 - Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2016)
- SS-EN-ISO-5362 - Anaesthetic reservoir bags (ISO 5362:2006)
- SS-EN-ISO-5364 - Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO 5364:2016)
- SS-EN-ISO-5366 - Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors (ISO 5366:2016)
- SS-EN-ISO-5366-1 - Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 1: Tubes and connectors for use in adults (ISO 5366-1:2000)
- SS-EN-ISO-5367 - Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2023)
- SS-EN-ISO-7199 - Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) (ISO 7199:2009 + Amd 1:2012)
- SS-EN-ISO-7376 - Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation (ISO 7376:2020)
- SS-EN-ISO-7396-1 - Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016)
- SS-EN-ISO-7396-1-AM1 - Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 1 (ISO 7396-1:2016/Amd 1:2017)
- SS-EN-ISO-7396-1-AM2 - Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 2 (ISO 7396-1:2007/Amd 2:2010)
- SS-EN-ISO-7396-1-AM3 - Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Terminology relating to alarm systems (ISO 7396-1:2007/Amd 3:2013)
- SS-EN-ISO-7396-2 - Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems (ISO 7396-2:2007)
- SS-EN-ISO-80000-8 - Quantities and units - Part 8: Acoustics (ISO 80000-8:2020)
- SS-EN-ISO-80369-1 - Small-bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO 80369-1:2018)
- SS-EN-ISO-80601-2-12 - Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators (ISO 80601-2-12:2020)
- SS-EN-ISO-80601-2-13 - Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2022)
- SS-EN-ISO-80601-2-13-AM1 - Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation - Amendment 1 (ISO 80601-2-13:2011/Amd 1:2015)
- SS-EN-ISO-80601-2-13-AM2 - Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation - Amendment 2 (ISO 80601-2-13:2011/Amd 2:2018)
- SS-EN-ISO-80601-2-55 - Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 80601-2-55:2018)
- SS-EN-ISO-80601-2-61 - Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61:2017)
- SS-EN-ISO-80601-2-67 - Medical electrical equipment - Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment (ISO 80601-2-67:2020)
- SS-EN-ISO-80601-2-69 - Medical electrical equipment - Part 2-69: Particular requirements for the basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2020)
- SS-EN-ISO-80601-2-70 - Medical electrical equipment - Part 2-70: Particular requirements for the basic safety and essential performance of sleep apnoea breathing therapy equipment (ISO 80601-2-70:2020)
- SS-EN-ISO-80601-2-72 - Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2023)
- SS-EN-ISO-80601-2-74 - Medical electrical equipment - Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment (ISO 80601-2-74:2021)
- SS-EN-ISO-80601-2-79 - Medical electrical equipment - Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment (ISO 80601-2-79:2018)
- SS-EN-ISO-80601-2-80 - Medical electrical equipment - Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency (ISO 80601-2-80:2018)
- SS-EN-ISO-80601-2-85 - Medical electrical equipment - Part 2-85: Particular requirements for the basic safety and essential performance of cerebral tissue oximeter equipment (ISO 80601-2-85:2021)
- SS-EN-ISO-80601-2-87 - Medical electrical equipment - Part 2-87: Particular requirements for basic safety and essential performance of high-frequency ventilators (ISO 80601-2-87:2021)
- SS-EN-ISO-80601-2-90 - Medical electrical equipment - Part 2-90: Particular requirements for basic safety and essential performance of respiratory high-flow therapy equipment (ISO 80601-2-90:2021)
- SS-EN-ISO-81060-1 - Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type (ISO 81060-1:2007)
- SS-EN-ISO-81060-2 - Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type (ISO 81060-2:2018)
- SS-EN-ISO-81060-2-AM1 - Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type - Amendment 1 (ISO 81060-2:2018/Amd 1:2020)
- SS-EN-ISO-81060-3 - Non-invasive sphygmomanometers - Part 3: Clinical investigation of continuous automated measurement type (ISO 81060-3:2022)
- SS-EN-ISO-8185 - Respiratory tract humidifiers for medical use - Particular requirements for respiratory humidification systems (ISO 8185:2007)
- SS-EN-ISO-8359 - Oxygen concentrators for medical use - Safety requirements (ISO 8359:1996)
- SS-EN-ISO-8359-AM1 - Oxygen concentrators for medical use - Safety requirements - Amendment 1 (ISO 8359:1996/Amd 1:2012)
- SS-EN-ISO-8835-2 - Inhalational anaesthesia systems - Part 2: Anaesthetic breathing systems (ISO 8835-2:2007)
- SS-EN-ISO-8835-3 - Inhalational anaesthesia systems - Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems (ISO 8835-3:2007)
- SS-EN-ISO-8835-3-AM1 - Inhalational anaesthesia systems - Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems (ISO 8835-3:2007/Amd 1:2010)
- SS-EN-ISO-8835-4 - Inhalational anaesthesia systems - Part 4: Anaesthetic vapour delivery devices (ISO 8835-4:2004)
- SS-EN-ISO-8835-5 - Inhalational anaesthesia systems - Part 5: Anaesthetic ventilators (ISO 8835-5:2004)
- SS-EN-ISO-8836 - Suction catheters for use in the respiratory tract (ISO 8836:2019)
- SS-EN-ISO-9170-1 - Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2020)
- SS-EN-ISO-9170-2 - Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008)
- SS-EN-ISO-9360-1 - Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000)
- SS-EN-ISO-9360-2 - Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml (ISO 9360-2:2001)
- SS-EN-ISO-9703-3 - Anaesthesia and respiratory care alarm signals - Part 3: Guidance on application of alarms (ISO 9703-3:1998)
- SS-EN-ISO-9919 - Medical electrical equipment - Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use (ISO 9919:2005)
- SS-EN-ISO/IEC-27011 - Information technology - Security techniques - Code of practice for Information security controls based on ISO/IEC 27002 for telecommunications organizations (ISO/IEC 27011:2016)
- SS-ISO-10303-517 - Industrial automation systems and integration - Product data representation and exchange - Part 517: Application interpreted construct: Mechanical design geometric presentation - Technical Corrigendum 1
- SS-ISO-16571 - Systems for evacuation of plume generated by medical devices (ISO 16571:2014, IDT)
- SS-ISO-18190 - Anaesthetic and respiratory equipment - General requirements for airways and related equipment (ISO 18190:2016, IDT)
- SS-ISO-26825 - Anaesthetic and respiratory equipment - User-applied labels for syringes containing drugs used during anaesthesia - Colours, design and performance (ISO 26825:2020, IDT)
- SS-ISO-32 - Gas cylinders for medical use - Marking for identification of content (ISO 32:1977, IDT)
- SS-ISO-4395 - Fluid power systems and components - Cylinder piston rod end types and dimensions (ISO 4395:2009, IDT)
- UNE-EN-ISO-23747 - Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans