Document Center List of Standards on Recycling Including Relevant Equipment Motor Vehicle Recycling, See 43.020
ICS Code 13.030.50
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1512 - Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
- ASTM-D7209 - Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products (Withdrawn 2015)
- ASTM-D8013 - Standard Guide for Establishing a Recycle Program for Roof Coverings Roofing Membrane and Shingle Materials
- ASTM-E1107 - Standard Test Method for Measuring the Throughput of Resource-Recovery Unit Operations
- ASTM-E1134 - Standard Specification for Source-Separated Steel Cans (Withdrawn 2001)
- ASTM-E829 - Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
- ASTM-E850 - Standard Guide for Characterization of Inorganic Process Wastes for Use as Structural Fill (Withdrawn 2019)
BSI:
- BS-6543 - Guide to use of industrial by-products and waste materials in building and civil engineering
- BS-EN-12816 - LPG equipment and accessories. Transportable refillable LPG cylinders. Disposal
- BS-EN-13429 - Packaging. Reuse
- BS-EN-13430 - Packaging. Requirements for packaging recoverable by material recycling
- BS-EN-13432 - Packaging. Requirements for packaging recoverable through composting and biodegradation. Test scheme and evaluation criteria for the final acceptance of packaging
- BS-EN-13440 - Packaging. Rate of recycling. Definition and method of calculation
- BS-EN-13920-1 - Aluminium and aluminium alloys. Scrap
- BS-EN-13920-10 - Aluminium and aluminium alloys. Scrap
- BS-EN-13920-11 - Aluminium and aluminium alloys. Scrap
- BS-EN-13920-12 - Aluminium and aluminium alloys. Scrap
- BS-EN-13920-13 - Aluminium and aluminium alloys. Scrap
- BS-EN-13920-14 - Aluminium and aluminium alloys. Scrap
- BS-EN-13920-15 - Aluminium and aluminium alloys. Scrap
- BS-EN-13920-2 - Aluminium and aluminium alloys. Scrap
- BS-EN-13920-3 - Aluminium and aluminium alloys. Scrap
- BS-EN-13920-4 - Aluminium and aluminium alloys. Scrap
- BS-EN-13920-5 - Aluminium and aluminium alloys. Scrap
- BS-EN-13920-6 - Aluminium and aluminium alloys. Scrap
- BS-EN-13920-7 - Aluminium and aluminium alloys. Scrap
- BS-EN-13920-8 - Aluminium and aluminium alloys. Scrap
- BS-EN-13920-9 - Aluminium and aluminium alloys. Scrap
- BS-EN-14243-1 - Materials obtained from end of life tyres
- BS-EN-14243-2 - Materials obtained from end of life tyres
- BS-EN-14243-3 - Materials obtained from end of life tyres
- BS-EN-15342 - Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates
- BS-EN-15343 - Plastics. Recycled plastics. Plastics recycling traceability and assessment of conformity and recycled content
- BS-EN-15344 - Plastics. Recycled plastics. Characterization of Polyethylene (PE) recyclates
- BS-EN-15344-TC - Tracked Changes. Plastics. Recycled plastics. Characterization of Polyethylene (PE) recyclates
- BS-EN-15345 - Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates
- BS-EN-15346 - Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates
- BS-EN-15347 - Plastics. Recycled Plastics. Characterization of plastics waste
- BS-EN-15348 - Plastics. Recycled plastics. Characterization of poly(ethylene terephthalate) (PET) recyclates
- BS-EN-17410 - Plastics. Controlled loop recycling of PVC-U profiles from windows and doors
- BS-EN-1744-8 - Tests for chemical properties of aggregates
- BS-EN-45553 - General method for the assessment of the ability to remanufacture energy-related products
- BS-EN-45556 - General method for assessing the proportion of reused components in energy-related products
- BS-ISO-22453 - Exchange of information on rare earth elements in industrial wastes and end-of-life cycled products
- BS-ISO-22628 - Road vehicles. Recyclability and recoverability. Calculation method
- DD-CEN-14243 - Materials produced from end of life tyres. Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities
- PAS-101 - Recovered Container Glass, Specification for Quality & Guidance for Good Practice in C
- PAS-102 - Specification for Processed Glass for Selected Secondary End Markets
- PAS-103 - Collected Waste Plastics Packaging, Specification for Quality & Guidance for Good Prac
- PAS-104 - Wood Recycling in the Panelboard Manufacturing Industry, Specification for Quality & G
- PAS-111 - Specification for the requirements and test methods for processing waste wood
- PD-CEN-13688 - Packaging. Material recycling. Report on requirements for substances and materials to prevent a sustained impediment to recycling
- PD-CEN-14520 - Packaging. Reuse. Methods for assessing the performance of a reuse system
- PD-CEN-16010 - Plastics. Recycled plastics. Sampling procedures for testing plastics waste and recyclates
- PD-CEN-16011 - Plastics. Recycled plastics. Sample preparation
- PD-CEN-16861 - Plastics. Recycled plastics. Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET)
- PD-CEN-16916 - Materials obtained from End of Life Tyres. Determination of specific requirements for sampling and determination of moisture content using the oven-dry method
- PD-CEN-17045 - Materials obtained from end-of-life tyres. Quality criteria for the selection of whole tyres, for recovery and recycling processes
- PD-CEN-17188 - Materials obtained from end of life tyres (ELT). Sampling method for granulates and powders stored in big-bags
- PD-CEN-17189 - Materials obtained from end of life tyres (ELT). Determination of the true density of granulates. Method based on water pycnometry
- PD-CEN-17510 - Materials obtained from end-of-life tyres. Determination of the specific surface area of powders. Method based on krypton adsorption
- PD-CLC-50489 - Smart tracker chips. Feasibility study on the inclusion of RFID in electrical and electronic equipment for WEEE management
- PD-ISO-23891 - Plastics. Recycling and recovery. Necessity of standards
IEC:
ISO:
- ISO-15270 - Plastics - Guidelines for the recovery and recycling of plastics waste
- ISO-22450 - Recycling of rare earth elements - Requirements for providing information on industrial waste and end-of-life products
- ISO-22451 - Recycling of rare earth elements - Methods for the measurement of rare earth elements in industrial waste and end-of-life products
- ISO-22453 - Exchange of information on rare earth elements in industrial wastes and end-of-life cycled products
- ISO-23891 - Plastics - Recycling and recovery - Necessity of standards
Other SDOs:
- CEN-17188 - Materials obtained from end of life tyres (ELT) - Sampling method for granulates and powders stored in big-bags
- CEN-17189 - Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry
- DIN-EN-13429 - Packaging, Reuse
- DIN-EN-13430 - Packaging, Requirements for Packaging Recoverable by Material Recycling
- EN-13430 - Packaging - Requirements for Packaging Recoverable by Material Recycling
- EN-15342 - Plastics, Recycled Plastics, Characterization of Polystyrene (Ps) Recyclates
- EN-15343 - Plastics, Recycled Plastics, Plastics Recycling Traceability & Assessment of Conformit
- EN-15344 - Plastics, Recycled Plastics, Characterization of Polyethylene (Pe) Recyclates
- EN-15345 - Plastics, Recycled Plastics, Characterization of Polypropylene (Pp) Recyclates
- EN-15346 - Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
- EN-15347 - Plastics, Recycled Plastics, Characterization of Plastics Wa Ste
- EN-15348 - Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates
- EN-1744-8 - Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
- SIS-CEN/TR-13688 - Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling
- SIS-CEN/TR-14520 - Packaging - Reuse - Methods for assessing the performance of a reuse system
- SIS-CEN/TR-15353 - Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
- SIS-CEN/TS-14243 - Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities
- SIS-CEN/TS-16010 - Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
- SIS-CEN/TS-16011 - Plastics - Recycled plastics - Sample preparation
- SIS-ISO/TS-22451 - Recycling of rare earth elements Methods for the measurement of rare earth elements in industrial waste and end-of-life products (ISO/TS 22451:2021, IDT)
- SS-EN-12816 - LPG equipment and accessories - Transportable refillable LPG cylinders - Disposal
- SS-EN-13429 - Packaging - Reuse
- SS-EN-13430 - Packaging - Requirements for packaging recoverable by material recycling
- SS-EN-13437 - Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart
- SS-EN-13440 - Packaging - Rate of recycling - Definition and method of calculation
- SS-EN-13920-1 - Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests
- SS-EN-13920-10 - Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of used aluminium beverage cans
- SS-EN-13920-11 - Aluminium and aluminium alloys - Scrap - Part 11: Scrap consisting of aluminium-copper radiators
- SS-EN-13920-12 - Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy
- SS-EN-13920-13 - Aluminium and aluminium alloys - Part 13: Mixed turnings consisting of two or more alloys
- SS-EN-13920-14 - Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings
- SS-EN-13920-15 - Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings
- SS-EN-13920-16 - Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics
- SS-EN-13920-2 - Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap
- SS-EN-13920-3 - Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap
- SS-EN-13920-4 - Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy
- SS-EN-13920-5 - Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series
- SS-EN-13920-6 - Aluminium and aluminium alloys - Scrap - Part 6: Scrap consisting of two or more wrought alloys
- SS-EN-13920-7 - Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings
- SS-EN-13920-8 - Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes
- SS-EN-13920-9 - Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials
- SS-EN-14243-1 - Materials obtained from end of life tyres - Part 1: General definitions related to the methods for determining their dimension(s) and impurities
- SS-EN-14243-2 - Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distribution and impurities, including free steel and free textile content
- SS-EN-14243-3 - Materials obtained from end of life tyres - Part 3: Shreds, cuts and chips - Methods for determining their dimension(s) including protruding filaments dimensions
- SS-EN-15342 - Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
- SS-EN-15343 - Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
- SS-EN-15344 - Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
- SS-EN-15345 - Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
- SS-EN-15346 - Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
- SS-EN-15347 - Plastics - Recycled Plastics - Characterisation of plastics wastes
- SS-EN-15348 - Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates
- SS-EN-17410 - Plastics - Controlled loop recycling of PVC-U profiles from windows and doors
- SS-EN-1744-8 - Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
- SS-EN-45556 - General method for assessing the proportion of reused components in energy-related products
- SS-EN-ISO-13688-AM1 - Protective clothing - General requirements - Amendment 1 (ISO 13688:2013/Amd 1:2021)
- SS-ISO-15270 - Plastics - Guidelines for the recovery and recycling of plastics waste (ISO 15270:2008, IDT)