Document Center List of Standards on Temperature-Measuring Instruments Including Thermostats Medical Thermometers, See 11.040.55
ICS Code 17.200.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D6176 - Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
- ASTM-D6176M - Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors (Metric)
- ASTM-D6744 - Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
- ASTM-D7962 - Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift
- ASTM-D8055 - Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards
- ASTM-D8164 - Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing
- ASTM-E1 - Standard Specification for ASTM Liquid-in-Glass Thermometers
- ASTM-E1061 - Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
- ASTM-E1104 - Standard Specification for Clinical Thermometer Probe Covers and Sheaths
- ASTM-E1129 - Standard Specification for Thermocouple Connectors
- ASTM-E1137 - Standard Specification for Industrial Platinum Resistance Thermometers
- ASTM-E1159 - Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum
- ASTM-E1256 - Standard Test Methods for Radiation Thermometers (Single Waveband Type)
- ASTM-E1299 - Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
- ASTM-E1311 - Standard Practice for Minimum Detectable Temperature Difference for Thermal Imaging Systems
- ASTM-E1350 - Standard Guide for Testing Sheathed Thermocouples, Thermocouple Assemblies, and Connecting Wires Prior to, and After Installation or Service
- ASTM-E1363 - Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM-E1502 - Standard Guide for Use of Fixed-Point Cells for Reference Temperatures
- ASTM-E1543 - Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems
- ASTM-E1582 - Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
- ASTM-E1594 - Standard Guide for Expression of Temperature
- ASTM-E1652 - Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Base Metal Thermocouples, Metal-Sheathed Platinum Resistance Thermometers, and Noble Metal Thermocouples
- ASTM-E1684 - Standard Specification for Miniature Thermocouple Connectors
- ASTM-E1750 - Standard Guide for Use of Water Triple Point Cells
- ASTM-E1751 - Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations
- ASTM-E1860 - Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
- ASTM-E1867 - Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM-E1953 - Standard Practice for Description of Thermal Analysis and Rheology Apparatus
- ASTM-E2046 - Standard Test Method for Reaction Induction Time by Thermal Analysis
- ASTM-E2067 - Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
- ASTM-E207 - Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
- ASTM-E220 - Standard Test Method for Calibration of Thermocouples By Comparison Techniques
- ASTM-E2251 - Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
- ASTM-E230 - Standard Specification for Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
- ASTM-E235 - Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications
- ASTM-E2488 - Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
- ASTM-E2593 - Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
- ASTM-E2623 - Standard Practice for Reporting Thermometer Calibrations
- ASTM-E2730 - Standard Guide for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
- ASTM-E2744 - Standard Test Method for Pressure Calibration of Thermal Analyzers
- ASTM-E2758 - Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
- ASTM-E2820 - Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors
- ASTM-E2821 - Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed Cable Used in Industrial Resistance Thermometers
- ASTM-E2846 - Standard Guide for Thermocouple Verification
- ASTM-E2847 - Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers
- ASTM-E2877 - Standard Guide for Digital Contact Thermometers
- ASTM-E2918 - Standard Test Method for Performance Validation of Thermomechanical Analyzers
- ASTM-E2995 - Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers
- ASTM-E3142 - Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
- ASTM-E3186 - Standard Guide for Use and Testing of Dry-Block Temperature Calibrators
- ASTM-E344 - Terminology Relating to Thermometry and Hydrometry
- ASTM-E452 - Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer
- ASTM-E574 - Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
- ASTM-E585 - Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
- ASTM-E601 - Standard Guide for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
- ASTM-E608 - Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
- ASTM-E633 - Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air
- ASTM-E639 - Standard Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
- ASTM-E644 - Standard Test Methods for Testing Industrial Resistance Thermometers
- ASTM-E696 - Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
- ASTM-E710 - Standard Test Method for Comparing EMF Stabilities of Base-Metal Thermoelements in Air Using Dual, Simultaneous, Thermal-EMF Indicators (Withdrawn 2006)
- ASTM-E77 - Standard Test Method for Inspection and Verification of Thermometers
- ASTM-E780 - Standard Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Mineral-Insulated, Metal-Sheathed Cable at Room Temperature
- ASTM-E825 - Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
- ASTM-E839 - Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
- ASTM-E879 - Standard Specification for Thermistor Sensors for General Purpose and Laboratory Temperature Measurements
- ASTM-E988 - Standard Temperature-Electromotive Force (EMF) Tables for Tungsten-Rhenium Thermocouples
- ASTM-F2362 - Standard Specification for Temperature Monitoring Equipment
- ASTM-G179 - Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
BSI:
- BS-1041 - Code for temperature measurement
- BS-1041-2.1 - Code for temperature measurement. Expansion thermometers
- BS-1041-2.2 - Code for temperature measurement. Expansion thermometers
- BS-1041-3 - Temperature measurement
- BS-1041-4 - Temperature measurement
- BS-1041-5 - Temperature measurement
- BS-1041-7 - Temperature measurement
- BS-1339-2 - Humidity. Humidity calculation functions, tables and user guide
- BS-1339-2-CD - Humidity
- BS-1365 - Specification for short-range short-stem thermometers
- BS-1704 - Specification for solid-stem general purpose thermometers
- BS-1794 - Specification for chart ranges for temperature recording instruments
- BS-1900 - Specification for secondary reference thermometers
- BS-2765 - Specification for dimensions of temperature detecting elements and corresponding pockets
- BS-2842 - Specification for whirling hygrometer
- BS-3166 - Specification for thermographs (liquid-filled and vapour pressure types) for use within the temperature range -20F to 220F ( -30C to 105C)
- BS-3231 - Specification for thermographs (bimetallic type) for air temperatures within the range 0F to 140F (-20C to 60C)
- BS-3273 - Specification for Distant Indicating Thermometers for Ships Refrigerated Cargo Spaces
- BS-4833 - Schedule for hygrometric tables for use in the testing and operation of environmental enclosures
- BS-4937-20 - International thermocouple reference tables. Specification for thermocouple tolerances
- BS-4937-30 - Extension & Compensating Cables, Tolerances & Identification System, International The
- BS-5074 - Specification for short and long solid-stem thermometers for precision use
- BS-5235 - Specification for dial-type expansion thermometers.
- BS-5248 - Specification for aspirated hygrometer
- BS-593 - Specification for laboratory thermometers
- BS-692 - Specification for meteorological thermometers
- BS-7575 - Specification for resistance thermometers and thermocouples for the measurement of temperature in tanks containing refrigerated light hydrocarbon fluids
- BS-791 - Specification for solid-stem calorimeter thermometers
- BS-EN-12830 - Temperature recorders for the transport, storage and distribution of temperature sensitive goods. Tests, performance, suitability
- BS-EN-13190 - Dial thermometers
- BS-EN-13485 - Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Tests, performance, suitability
- BS-EN-13485-TC - Tracked Changes. Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Tests, performance, suitability
- BS-EN-13486 - Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Periodic verification
- BS-EN-13486-TC - Tracked Changes. Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Periodic verification
- BS-EN-1434-1-TC - Tracked Changes. Thermal energy meters
- BS-EN-1434-2-TC - Tracked Changes. Thermal energy meters
- BS-EN-1434-4-TC - Tracked Changes. Thermal energy meters
- BS-EN-1434-6-TC - Tracked Changes. Thermal energy meters
- BS-EN-14597 - Temperature control devices and temperature limiters for heat generating systems
- BS-EN-17690-1 - Components for BAC control loop. Sensors
- BS-EN-50112 - Measurement, control, regulation. Electrical temperature sensors. Metal protecting tubes for TC assemblies
- BS-EN-50113 - Measurement, Control, Regulation. Electrical Temperature Sensors. Isolating Tubes For
- BS-EN-50446 - Straight thermocouple assembly with metal or ceramic protection tube and accessories
- BS-EN-60584-1 - Thermocouples
- BS-EN-60584-2 - Thermocouples. Tolerances
- BS-EN-60584-3 - Thermocouples
- BS-EN-60751 - Industrial platinum resistance thermometers and platinum temperature sensors
- BS-EN-61515 - Mineral insulated metal-sheathed thermocouple cables and thermocouples
- BS-EN-61515-TC - Tracked Changes. Mineral insulated metal-sheathed thermocouple cables and thermocouples
- BS-EN-62460 - Temperature. Electromotive force (EMF) tables for pure-element thermocouple combinations
- BS-EN-IEC-60584-3 - Thermocouples
- BS-EN-IEC-60584-3-TC - Tracked Changes. Thermocouples
- BS-EN-IEC-60751 - Industrial platinum resistance thermometers and platinum temperature sensors
- BS-EN-IEC-61788-4 - Superconductivity
- BS-EN-IEC-61869-14 - Instrument transformers
- BS-EN-IEC-62828-3 - Reference conditions and procedures for testing industrial and process measurement transmitters
- BS-EN-IEC-62828-4 - Reference conditions and procedures for testing industrial and process measurement transmitters
- BS-EN-IEC-62828-5 - Reference conditions and procedures for testing industrial and process measurement transmitters
- BSI CONVERSION SLIDE - Conversion factors for units
- BS-IEC-61520 - Metal thermowells for thermometer sensors. Functional dimension
- DD-IEC-62492-1 - Industrial process control devices. Radiation thermometers. Technical data for radiation thermometers
- PD-IEC-62492-2 - Industrial process control devices. Radiation thermometers
IEC:
- IEC-1152 - Dimensions of metal-sheathed thermometer elements
- IEC-1515 - Mineral insulated thermocouple cables and thermocouples
- IEC-584-2 - Thermocouples. Part 2: Tolerances
- IEC-584-2-1 - Amendment No. 1
- IEC-60584-1 - Thermocouples - Part 1: EMF specifications and tolerances
- IEC-60584-3 - Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system
- IEC-60682-2 - Amendment No. 2
- IEC-60751 - Industrial platinum resistance thermometers and platinum temperature sensors
- IEC-61515 - Mineral insulated metal-sheathed thermocouple cables and thermocouples
- IEC-61520 - Metal thermowells for thermometer sensors - Functional dimensions
- IEC-62460 - Temperature - Electromotive force (EMF) tables for pure-element thermocouple combinations
- IEC-62492-1 - Industrial process control devices - Radiation thermometers - Part 1: Technical data for radiation thermometers
- IEC-62492-2 - Industrial process control devices - Radiation thermometers - Part 2: Determination of the technical data for radiation thermometers
- IEC-62828-3 - Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters
- IEC-62828-4 - Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters
- IEC-62828-5 - Reference conditions and procedures for testing industrial and process measurement transmitters - Part 5: Specific procedures for flow transmitters
- IEC-682 - Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps
- IEC-682-1 - Amendment No. 1
ISO:
- ISO-1146 - Pyrometric reference cones for laboratory use - Specification
- ISO-1770 - Solid-stem general purpose thermometers
- ISO-1770-1 - Amendment 1 to ISO 1770:1981
- ISO-1771 - Enclosed-scale general purpose thermometers
- ISO-1771-1 - Amendment 1 to ISO 1771:1981
- ISO-17714 - Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
- ISO-386 - Liquid-in-glass laboratory thermometers - Principles of design, construction and use
- ISO-4786 - Enclosed-scale adjustable-range thermometers
- ISO-4795 - Glass for thermometer bulbs
- ISO-6152 - Thermometers for use with alcoholometers and alcohol hydrometers
- ISO-651 - Solid-stem calorimeter thermometers
- ISO-652 - Enclosed-scale calorimeter thermometers
- ISO-653 - Long solid-stem thermometers for precision use
- ISO-654 - Short solid-stem thermometers for precision use
- ISO-655 - Long enclosed-scale thermometers for precision use
- ISO-656 - Short enclosed-scale thermometers for precision use
Other SDOs:
- DIN-EN-14597 - Temperature control devices and temperature limiters for heat generating systems; German version EN 14597:2012
- EN-12470-5 - Part 5: Performance of Infra-Red Ear Thermometers (With Maximum Device), Clinical Ther
- EN-13485 - Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability
- EN-14597 - Temperature control devices and temperature limiters for heat generating systems
- EN-50113 - Straight Thermocouple Assembly With Metal or Ceramic Protection Tube & Accessories
- EN-50446 - Straight Thermocouple Assembly With Metal or Ceramic Protection Tube & Accessories
- EN-60584-1 - Thermocouples - Part 1: EMF specifications and tolerances
- EN-60584-3 - Thermocouples, Extension & Compensating Cables, Tolerances & Identification System
- EN-60751 - Industrial Platinum Resistance Thermometers & Platinum Temperature Sensors
- EN-61515 - Mineral insulated metal-sheathed thermocouple cables and thermocouples
- EN-61788-4 - Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
- EN-62460 - Temperature, Electromotive Force (Emf) Tables for Pure-Element Thermocouple Combinatio
- EN-IEC-61869-14 - Instrument transformers - Part 14: Additional requirements for current transformers for DC applications (IEC 61869-14:2018)
- EN-IEC-61869-15 - Instrument transformers - Part 15: Additional requirements for voltage transformers for DC applications (IEC 61869-15:2018)
- EN-IEC-62828-3 - Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters
- JIS-B-7410 - Liquid-in-glass thermometers for testing of petroleum products
- JIS-B-7411 - Solid-stem general purpose liquid-in-glass thermometers
- JIS-C-8367 - Electromechanical pressure type thermostats for household appliances
- SS-EN-12470-1 - Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device
- SS-EN-12470-2 - Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
- SS-EN-12470-3 - Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
- SS-EN-12470-4 - Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement
- SS-EN-12470-5 - Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device)
- SS-EN-12830 - Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
- SS-EN-13190 - Dial thermometers
- SS-EN-13485 - Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
- SS-EN-13486 - Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification
- SS-EN-1434-1 - Thermal energy meters - Part 1: General requirements
- SS-EN-1434-2 - Thermal energy meters - Part 2: Constructional requirements
- SS-EN-1434-4 - Thermal energy meters - Part 4: Pattern approval tests
- SS-EN-1434-5 - Thermal energy meters - Part 5: Initial verification tests
- SS-EN-1434-6 - Thermal energy meters - Part 6: Installation, commissioning, operational monitoring and maintenance
- SS-EN-14597 - Temperature control devices and temperature limiters for heat generating systems
- SS-EN-215 - Thermostatic radiator valves - Requirements and test methods
- SS-EN-215-AM1 - Thermostatic radiator valves - Requirements and test methods
- SS-EN-257 - Mechanical thermostats for gas-burning appliances
- SS-EN-257-AM1 - Mechanical thermostats for gas-burning appliances
- SS-EN-ISO-80601-2-56 - Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement (ISO 80601-2-56:2009)
- SS-ISO-8056-2 - Aircraft - Nickel-chromium and nickel-aluminium thermocouple extension cables - Part 2: Terminations - General requirements and tests
- SS-ISO-8310 - Refrigerated light hydrocarbon fluids - Measurement of temperature in tanks containing liquefied gases - Resistance thermometers and thermocouples