Document Center List of Standards on Non-Ferrous Metal Pipes Non-Ferrous Metal Pipes And Tubes For Specific Use, See 77.150
ICS Code 23.040.15
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A254 - Standard Specification for Copper-Brazed Steel Tubing
- ASTM-A807 - Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
- ASTM-B1003 - Standard Specification for Seamless Copper Tube for Linesets
- ASTM-B1007 - Standard Specification for Welded Precipitation Hardenable or Cold Worked, Nickel Alloy Tube
- ASTM-B111 - Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
- ASTM-B135 - Standard Specification for Seamless Brass Tube
- ASTM-B135M - Standard Specification for Seamless Brass Tube [Metric] (Withdrawn 2017)
- ASTM-B153 - Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
- ASTM-B163 - Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
- ASTM-B251M - Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric] (Withdrawn 2017)
- ASTM-B280 - Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
- ASTM-B302 - Standard Specification for Threadless Copper Pipe, Standard Sizes
- ASTM-B306 - Standard Specification for Copper Drainage Tube (DWV)
- ASTM-B338 - Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
- ASTM-B345 - Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems (Withdrawn 2017)
- ASTM-B345M - Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems (Metric) (Withdrawn 1998)
- ASTM-B359 - Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
- ASTM-B359M - Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes with Integral Fins [Metric] (Withdrawn 2002)
- ASTM-B360 - Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
- ASTM-B394 - Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
- ASTM-B395 - Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
- ASTM-B395M - Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes [Metric] (Withdrawn 2002)
- ASTM-B407 - Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
- ASTM-B423 - Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy
(UNS N08825, N08221, and N06845) Seamless Pipe and Tube - ASTM-B428 - Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
- ASTM-B447 - Standard Specification for Welded Copper Tube
- ASTM-B483 - Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
- ASTM-B483M - Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General-Purpose Applications (Metric) (Withdrawn 1998)
- ASTM-B491 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
- ASTM-B515 - Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
- ASTM-B516 - Standard Specification for Welded Nickel-Chromium-Aluminum Alloy (UNS N06699) and Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06601, UNS N06603, UNS N06025, UNS N06045, UNS N06690, and UNS N06693) Tubes
- ASTM-B517 - Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
- ASTM-B523 - Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
- ASTM-B546 - Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
- ASTM-B587 - Standard Specification for Welded Brass Tube
- ASTM-B619 - Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
- ASTM-B622 - Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
- ASTM-B626 - Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
- ASTM-B658 - Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
- ASTM-B675 - Standard Specification for UNS N08367 Welded Pipe
- ASTM-B676 - Standard Specification for UNS N08367 Welded Tube
- ASTM-B677 - Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
- ASTM-B698 - Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
- ASTM-B706 - Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
- ASTM-B716 - Specification for Welded Copper Water Tube (Withdrawn 1994)
- ASTM-B716M - Specification for Welded Copper Water Tube (Metric) (Withdrawn 1994)
- ASTM-B722 - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube (Withdrawn 2021)
- ASTM-B723 - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe
- ASTM-B745 - Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
- ASTM-B790 - Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
- ASTM-B811 - Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
- ASTM-B828 - Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
- ASTM-B829 - Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
- ASTM-B834 - Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts
- ASTM-B88 - Standard Specification for Seamless Copper Water Tube
- ASTM-B88M - Standard Specification for Seamless Copper Water Tube (Metric)
- ASTM-B903 - Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
- ASTM-B983 - Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube
- ASTM-C1863 - Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
- ASTM-E1928 - Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing
- ASTM-E243 - Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes
- ASTM-F2207 - Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
BSI:
- BS-1306 - Specification for copper and copper alloy pressure piping systems
- BS-EN-1057 - Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications
- BS-EN-12449 - Copper and copper alloys. Seamless, round tubes for general purposes
- BS-EN-12450 - Copper and copper alloys. Seamless, round copper capillary tubes
- BS-EN-12735-1 - Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration
- BS-EN-12735-2 - Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration
- BS-EN-12735-2-TC - Tracked Changes. Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration
- BS-EN-13348 - Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum
- BS-EN-13348-TC - Tracked Changes. Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum
- BS-EN-13349 - Copper and copper alloys. Pre-insulated copper tubes with solid covering
- BS-EN-1971-1 - Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubes
- BS-ISO-6362-2 - Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profiles
ISO:
- ISO-6207 - Seamless nickel and nickel alloy tube
- ISO-6362-1 - Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 1: Technical conditions for inspection and delivery
- ISO-6362-2 - Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 2: Mechanical properties
- ISO-6363-1 - Wrought aluminium and aluminium alloys - Cold-drawn rods/bars, tubes and wires - Part 1: Technical conditions for inspection and delivery
- ISO-6363-2 - Wrought aluminium and aluminium alloys - Cold-drawn rods/bars, tubes and wires - Part 2: Mechanical properties
- ISO-6363-6 - Wrought aluminium and aluminium alloys - Cold-drawn rods/bars, tubes and wires - Part 6: Tolerances on form and dimensions for drawn round tubes
- ISO-7773 - Magnesium alloys - Round bars and tubes - Dimensional tolerances
Other SDOs:
- DIN-EN-1057 - Copper & Copper Alloys - Seamless, Round Copper Tubes for Water & Gas in Sanitary & He
- DIN-EN-12735-1 - Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems; German version EN 12735-1:2016
- DIN-EN-12735-2 - Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment; German version EN 12735-2:2016
- DIN-EN-13348 - Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum; German version EN 13348:2016
- DIN-EN-13349 - Copper & Copper Alloys - Pre-Insulated Copper Tubes With Solid Covering
- EN-1057 - Copper & Copper Alloys - Seamless, Round Copper Tubes for Water & Gas in Sanitary & He
- EN-12449 - Copper and copper alloys - Seamless, round tubes for general purposes
- EN-12450 - Copper and copper alloys - Seamless, round copper capillary tubes
- EN-12451 - Copper and copper alloys - Seamless, round tubes for heat exchangers
- EN-12452 - Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
- EN-12735-1 - Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
- EN-12735-2 - Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
- EN-13348 - Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum
- EN-13349 - Copper & Copper Alloys - Pre-Insulated Copper Tubes With Solid Covering
- EN-1971-2 - Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
- JIS-H-0517 - Differential pressure testing method of titanium welded tubes
- JIS-H-3330 - Plastic covered copper tubes
- JIS-H-4202 - Magnesium alloy seamless pipes and tubes
- JIS-H-4630 - Titanium and titanium alloys -- Seamless pipes
- JIS-H-4631 - Titanium and titanium alloys -- Tubes for heat exchangers
- JIS-H-4635 - Titanium and titanium alloys -- Welded pipes
- SS-EN-1057 - Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
- SS-EN-12449 - Copper and copper alloys - Seamless, round tubes for general purposes
- SS-EN-12450 - Copper and copper alloys - Seamless, round copper capillary tubes
- SS-EN-12451 - Copper and copper alloys - Seamless, round tubes for heat exchangers
- SS-EN-12452 - Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
- SS-EN-12735-1 - Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
- SS-EN-12735-1-AM1 - Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
- SS-EN-12735-2 - Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
- SS-EN-12735-2-AM1 - Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
- SS-EN-13348 - Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum
- SS-EN-13348-AM1 - Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum
- SS-EN-13349 - Copper and copper alloys - Pre-insulated copper tubes with solid covering
- SS-EN-15632-1 - District heating pipes - Factory made flexible pipe systems - Part 1: Classification, general requirements and test methods
- SS-EN-15632-4 - District heating pipes - Factory made flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods
- SS-EN-1971 - Copper and copper alloys - Eddy current test for tubes
- SS-EN-1971-1 - Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
- SS-EN-1971-2 - Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface