Document Center List of Standards on Internal Combustion Engines This Group Includes Standards For General Use Internal Combustion Engines For Current Generating Sets, See 29.160.40 Internal Combustion Engines For Road Vehicles, See 43.060 Marine Engines, See 47.020.20
ICS Code 27.020
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-A983 - Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
- ASTM-D5290 - Standard Test Method for Measurement of Oil Consumption, Piston Deposits and Wear in a Heavy-Duty High Speed Diesel Engine-NTC-400 Procedure (Withdrawn 1997)
- ASTM-D6838 - Standard Test Method for Cummins M11 High Soot Test (Withdrawn 2019)
- ASTM-D6975 - Standard Test Method for Cummins M11 EGR Test (Withdrawn 2019)
- ASTM-D7348 - Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues
- ASTM-D7468 - Standard Test Method for Cummins ISM Test
- ASTM-G181 - Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
BSI:
- BS-3529 - Specification for dimensions of flywheel housing mounting pads and brackets for i.c. engines
- BS-5208 - Specification for dimensions of power take-off driving shafts and mounting faces for small internal combustion engines
- BS-5341-1 - Specification for piston rings up to 200 mm diameter for reciprocating internal combustion engines
- BS-5341-2 - Specification for piston rings up to 200 mm diameter for reciprocating internal combustion engines
- BS-5341-3 - Specification for piston rings up to 200 mm diameter for reciprocating internal combustion engines
- BS-5341-4 - Specification for piston rings up to 200 mm diameter for reciprocating internal combustion engines
- BS-5341-5 - Piston rings up to 200 mm diameter for reciprocating internal combustion engines
- BS-5341-6.1 - Vocabulary, Piston Rings Up To 200 mm Diameter for Reciprocating Combustion Engines
- BS-5341-6.2 - Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabulary, inspection methods and generic specifications.Inspection measuring principles
- BS-5341-6.3 - Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabulary, inspection methods and generic specifications. Material specifications
- BS-5341-6.4 - Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabulary, inspection methods and generic specifications. General specifications
- BS-5341-6.5 - Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabularly, inspection methods and generic specifications.. Quality requirements
- BS-5341-7.1.1 - Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for singlepiece rings. Rectangular compression rings. Specification for rectangular rings
- BS-5341-7.2 - Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Specification for scraper rings
- BS-5341-7.3.1 - Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Keystone and half keystone compression rings. Specification for keystone rings
- BS-5514-3 - Specification for Test Measurements
- BS-5514-4 - Reciprocating internal combustion engines. Performance
- BS-7016-1 - Glossary of Terms for Structure and External Covers
- BS-7016-4 - Glossary of Terms for Pressure Charging & Air/Exhaust Gas Ducting Systems, Components
- BS-7016-7 - Governing Systems, Reciprocating Internal Combustion Engines- Vocabulary of Components
- BS-7016-8 - Part 8: Glossary of Terms for Starting Systems, Components & Systems of Reciprocating
- BS-7403-1 - Full-flow lubricating oil filters for internal combustion engines. Methods of test for differential pressure/flow characteristics
- BS-7403-13 - Specification for Dimensions of Spin-on Filters
- BS-7403-2 - Full-flow lubricating oil filters for internal combustion engines
- BS-7403-3 - Full-flow lubricating oil filters for internal combustion engines. Methods of test for resistance to high differential pressure and to elevated temperature
- BS-7403-4 - Full-flow lubricating oil filters for internal combustion engines
- BS-7403-5 - Full-flow lubricating oil filters for internal combustion engines. Method of test for cold start simulation and hydraulic pulse durability
- BS-7403-6 - Full-flow lubricating oil filters for internal combustion engines. Method of test for static burst pressure
- BS-7403-7 - Full-flow lubricating oil filters for internal combustion engines. Method of test for vibration fatigue
- BS-7525 - Specification for Flammability of Air Cleaner Elements for Internal Combustion Engines
- BS-7698-1 - Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets,
- BS-7698-2 - Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets,
- BS-7698-3 - Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets,
- BS-7698-4 - Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets,
- BS-7698-5 - Reciprocating internal combustion engine driven alternating current generating sets. Specification for generating sets
- BS-7698-7 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-7698-8 - Reciprocating internal combustion engine driven alternating current generating sets. Requirements and tests for low-power generating sets
- BS-7698-9 - Reciprocating internal combustion engine driven alternating current generating sets. Measurement and evaluation of mechanical vibrations
- BS-EN-12601 - Reciprocating internal combustion engine driven generating sets. Safety
- BS-EN-1679-1 - Reciprocating internal combustion engines. Safety
- BS-EN-55012 - Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers
- BS-EN-ISO-11102-1 - Reciprocating internal combustion engines. Handle starting equipment
- BS-EN-ISO-11102-2 - Reciprocating internal combustion engines. Handle starting equipment
- BS-EN-ISO-14314 - Reciprocal internal combustion engines. Recoil starting equipment. General safety requirements
- BS-EN-ISO-8178-5 - Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
- BS-EN-ISO-8528-10 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-EN-ISO-8528-10-TC - Tracked Changes. Reciprocating internal combustion engine driven alternating current generating sets
- BS-EN-ISO-8528-13 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-ISO-11424 - Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification
- BS-ISO-11424-TC - Tracked Changes. Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification
- BS-ISO-14396 - Reciprocating internal combustion engines. Determination and method for the measurement of engine power. Additional requirements for exhaust emission tests in accordance with ISO 8178
- BS-ISO-15550 - Internal combustion engines. Determination and method for the measurement of engine power. General requirements
- BS-ISO-15550-TC - Tracked Changes. Internal combustion engines. Determination and method for the measurement of engine power. General requirements
- BS-ISO-15619 - Reciprocating internal combustion engines. Measurement method for exhaust silencers. Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio
- BS-ISO-19013-1 - Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification
- BS-ISO-19013-2 - Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification
- BS-ISO-19013-2-TC - Tracked Changes. Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification
- BS-ISO-21006 - Internal combustion engines. Engine weight (mass) declaration
- BS-ISO-2710-1 - Reciprocating internal combustion engines. Vocabulary
- BS-ISO-3046-1 - Reciprocating internal combustion engines. Performance
- BS-ISO-3046-3 - Reciprocating internal combustion engines. Performance
- BS-ISO-3046-4 - Reciprocating internal combustion engines. Performance
- BS-ISO-3046-5 - Reciprocating internal combustion engines. Performance
- BS-ISO-4548-12 - Methods of test for full-flow lubricating oil filters for internal combustion engines
- BS-ISO-4548-13 - Methods of test for full-flow lubricating oil filters for internal combustion engines
- BS-ISO-4548-13-TC - Tracked Changes. Methods of test for full-flow lubricating oil filters for internal combustion engines
- BS-ISO-4548-14 - Methods of test for full-flow lubricating oil filters for internal combustion engines
- BS-ISO-4548-14-TC - Tracked Changes. Methods of test for full-flow lubricating oil filters for internal combustion engines
- BS-ISO-4548-15 - Methods of test for full-flow lubricating oil filters for internal combustion engines
- BS-ISO-4548-5 - Methods of test for full-flow lubricating oil filters for internal combustion engines
- BS-ISO-4548-6 - Methods of test for full-flow lubricating oil filters for internal combustion engines
- BS-ISO-4548-6-TC - Tracked Changes. Methods of test for full-flow lubricating oil filters for internal combustion engines
- BS-ISO-4548-7 - Methods of test for full-flow lubricating oil filters for internal combustion engines
- BS-ISO-4548-9 - Methods of test for full-flow lubricating oil filters for internal combustion engines
- BS-ISO-4639-2 - Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification. Oxygenated fuels
- BS-ISO-4639-3 - Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification. Oxidized fuels
- BS-ISO-6622-1-TC - Tracked Changes. Internal combustion engines. Piston rings
- BS-ISO-6798-1 - Reciprocating internal combustion engines. Measurement of sound power level using sound pressure
- BS-ISO-6798-2 - Reciprocating internal combustion engines. Measurement of sound power level using sound pressure
- BS-ISO-6798-3 - Reciprocating internal combustion engines. Measurement of sound power level using sound pressure
- BS-ISO-6826 - Reciprocating internal combustion engines. Fire protection
- BS-ISO-6826-TC - Tracked Changes. Reciprocating internal combustion engines. Fire protection
- BS-ISO-7967-1 - Reciprocating internal combustion engines. Vocabulary of components and systems
- BS-ISO-7967-10 - Reciprocating internal combustion engines. Vocabulary of components and systems
- BS-ISO-7967-10-TC - Tracked Changes. Reciprocating internal combustion engines. Vocabulary of components and systems
- BS-ISO-7967-11 - Reciprocating internal combustion engines. Vocabulary of components and systems
- BS-ISO-7967-11-TC - Tracked Changes. Reciprocating internal combustion engines. Vocabulary of components and systems
- BS-ISO-7967-12 - Reciprocating internal combustion engines. Vocabulary of components and systems
- BS-ISO-7967-4 - Reciprocating internal combustion engines. Vocabulary of components and systems
- BS-ISO-7967-5 - Reciprocating internal combustion engines. Vocabulary of components and systems
- BS-ISO-7967-6 - Reciprocating internal combustion engines. Vocabulary of components and systems
- BS-ISO-7967-6-TC - Tracked Changes. Reciprocating internal combustion engines. Vocabulary of components and systems
- BS-ISO-7967-7 - Reciprocating internal combustion engines. Vocabulary of components and systems
- BS-ISO-7967-8 - Reciprocating internal combustion engines. Vocabulary of components and systems
- BS-ISO-7967-9 - Reciprocating internal combustion engines. Vocabulary of components and systems
- BS-ISO-8178-1 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-10 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-11 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-1-TC - Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-2 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-2-TC - Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-4 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-5 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-5-TC - Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-6 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-7 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-7-TC - Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-8 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-8-TC - Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-9 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8528-1 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-ISO-8528-12 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-ISO-8528-1-TC - Tracked Changes. Reciprocating internal combustion engine driven alternating current generating sets
- BS-ISO-8528-2 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-ISO-8528-2-TC - Tracked Changes. Reciprocating internal combustion engine driven alternating current generating sets
- BS-ISO-8528-3 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-ISO-8528-4 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-ISO-8528-5 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-ISO-8528-5-TC - Tracked Changes. Reciprocating internal combustion engine driven alternating current generating sets
- BS-ISO-8528-6 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-ISO-8528-6-TC - Tracked Changes. Reciprocating internal combustion engine driven alternating current generating sets.Test methods.
- BS-ISO-8528-7 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-ISO-8528-8 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-ISO-8528-9 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-ISO-8999 - Reciprocating internal combustion engines. Graphical symbols
- DD-ISO-23556 - Performance test method for diesel engine soot-removal devices in lubricating oils. Initial filtration efficiency
- ISO-6798-1 FRENCH - Reciprocating internal combustion engines - Measurement of sound power level using sound pressure - Part 1: Engineering method [Standard in French]
- PD-ISO-19425 - Reciprocating internal combustion engines. Measurement method for air cleaners. Sound power level of combustion air inlet noise and insertion loss using sound pressure
ISO:
- ISO-11102-1 - Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests
- ISO-11102-2 - Reciprocating internal combustion engines -- Handle starting equipment -- Part 2: Method of testing the angle of disengagement
- ISO-11424 - Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification
- ISO-1204 - Reciprocating internal combustion engines -- Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine
- ISO-13332 - Reciprocating internal combustion engines -- Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
- ISO-13774 - Rubber and plastics hoses for fuels for internal-combustion engines - Method of test for flammability
- ISO-14314 - Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements
- ISO-14396 - Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178
- ISO-15550 - Internal combustion engines - Determination and method for the measurement of engine power - General requirements
- ISO-15619 - Reciprocating internal combustion engines - Measurement method for exhaust silencers - Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio
- ISO-19013-1 - Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels
- ISO-19013-2 - Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 2: Gasoline fuels
- ISO-19425 - Reciprocating internal combustion engines - Measurement method for air cleaners - Sound power level of combustion air inlet noise and insertion loss using sound pressure
- ISO-21006 - Internal combustion engines - Engine weight (mass) declaration
- ISO-2261 - Reciprocating internal combustion engines -- Hand-operated control devices -- Standard direction of motion
- ISO-23556 - Performance test method for diesel engine soot-removal devices in lubricating oils - Initial filtration efficiency
- ISO-2710-1 - Reciprocating internal combustion engines - Vocabulary - Part 1: Terms for engine design and operation
- ISO-2710-2 - Reciprocating internal combustion engines - Vocabulary - Part 2: Terms for engine maintenance
- ISO-3046-1 - Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use
- ISO-3046-3 - Reciprocating internal combustion engines - Performance - Part 3: Test measurements
- ISO-3046-4 - Reciprocating internal combustion engines - Performance - Part 4: Speed governing
- ISO-3046-5 - Reciprocating internal combustion engines - Performance - Part 5: Torsional vibrations
- ISO-3046-6 - Reciprocating internal combustion engines - Performance - Part 6: Overspeed protection
- ISO-4548-1 - Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 1: Differential pressure/flow characteristics
- ISO-4548-12 - Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting and contaminant retention capacity
- ISO-4548-13 - Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 13: Static burst pressure test for composite filter housings
- ISO-4548-14 - Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 14: Hydraulic pulse durability for composite filter housings
- ISO-4548-15 - Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 15: Vibration fatigue test for composite filter housings
- ISO-4548-2 - Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 2: Element by-pass valve characteristics
- ISO-4548-3 - Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 3: Resistance to high differential pressure and to elevated temperature
- ISO-4548-4 - Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 4: Initial particle retention efficiency, life and cumulative efficiency (gravimetric method)
- ISO-4548-5 - Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 5: Test for hydraulic pulse durability
- ISO-4548-6 - Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
- ISO-4548-7 - Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 7: Vibration fatigue test
- ISO-4548-9 - Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests
- ISO-6307 - Effect of conductivity on multipass testing as per ISO 4548-12:2017
- ISO-6622-1 - Internal combustion engines - Piston rings - Part 1: Rectangular rings made of cast iron
- ISO-6798 - Reciprocating internal combustion engines -- Measurement of emitted airborne noise -- Engineering method and survey method
- ISO-6798-1 - Reciprocating internal combustion engines - Measurement of sound power level using sound pressure - Part 1: Engineering method
- ISO-6798-2 - Reciprocating internal combustion engines - Measurement of sound power level using sound pressure - Part 2: Survey method
- ISO-6798-3 - Reciprocating internal combustion engines - Measurement of sound power level using sound pressure - Part 3: Survey method for use in situ
- ISO-6826 - Reciprocating internal combustion engines - Fire protection
- ISO-683-15 - Heat-treatable steels, alloy steels and free-cutting steels - Part 15: Valve steels for internal combustion engines
- ISO-7967-1 - Reciprocating internal combustion engines - Vocabulary of components and systems - Part 1: Structure and external covers
- ISO-7967-10 - Reciprocating internal combustion engines - Vocabulary of components and systems - Part 10: Ignition systems
- ISO-7967-11 - Reciprocating internal combustion engines - Vocabulary of components and systems - Part 11: Liquid fuel systems
- ISO-7967-12 - Reciprocating internal combustion engines - Vocabulary of components and systems - Part 12: Exhaust emission control systems
- ISO-7967-2 - Reciprocating internal combustion engines - Vocabulary of components and systems - Part 2: Main running gear
- ISO-7967-3 - Reciprocating internal combustion engines - Vocabulary of components and systems - Part 3: Valves, camshaft drives and actuating mechanisms
- ISO-7967-4 - Reciprocating internal combustion engines - Vocabulary of components and systems - Part 4: Pressure charging and air/exhaust gas ducting systems
- ISO-7967-5 - Reciprocating internal combustion engines - Vocabulary of components and systems - Part 5: Cooling systems
- ISO-7967-6 - Reciprocating internal combustion engines - Vocabulary of components and systems - Part 6: Lubricating systems
- ISO-7967-7 - Reciprocating internal combustion engines - Vocabulary of components and systems - Part 7: Governing systems
- ISO-7967-8 - Reciprocating internal combustion engines - Vocabulary of components and systems - Part 8: Starting systems
- ISO-7967-9 - Reciprocating internal combustion engines - Vocabulary of components and systems - Part 9: Control and monitoring systems
- ISO-8178-1 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement systems of gaseous and particulate emissions
- ISO-8178-10 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
- ISO-8178-11 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
- ISO-8178-2 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
- ISO-8178-3 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 3: Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter
- ISO-8178-4 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state and transient test cycles for different engine applications
- ISO-8178-5 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels
- ISO-8178-6 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test
- ISO-8178-7 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 7: Engine family determination
- ISO-8178-8 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 8: Engine group determination
- ISO-8178-9 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
- ISO-8528-1 - Reciprocating internal combustion engine driven alternating current generating sets - Part 1: Application, ratings and performance
- ISO-8528-10 - Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise
- ISO-8528-12 - Reciprocating internal combustion engine driven alternating current generating sets - Part 12: Emergency power supply to safety services
- ISO-8528-13 - Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety
- ISO-8528-2 - Reciprocating internal combustion engine driven alternating current generating sets - Part 2: Engines
- ISO-8528-3 - Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets
- ISO-8528-4 - Reciprocating internal combustion engine driven alternating current generating sets - Part 4: Controlgear and switchgear
- ISO-8528-5 - Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets
- ISO-8528-6 - Reciprocating internal combustion engine driven alternating current generating sets - Part 6: Test methods
- ISO-8528-7 - Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design
- ISO-8528-8 - Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets
- ISO-8528-9 - Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations
- ISO-8999 - Reciprocating internal combustion engines -- Graphical symbols
- ISO/FDIS-21006 - Internal Combustion Engines - Engine Weight (Mass) Declaration
Other SDOs:
- CISPR-12 - Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers
- CISPR-12-AM1 - Amendment 1 - Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers
- DIN-EN-ISO-14314 - Reciprocal Internal Combustion Engines - Recoil Starting Equipment - General Safety Re
- EN-55012 - Vehicles, Boats & Internal Combustion Engines - Radio Disturbance Characteristics - Li
- EN-ISO-11102-1 - Part 1: Safety Requirements & Tests, Reciprocating Internal Combustion Engines - Hand
- EN-ISO-11102-2 - Part 2: Method of Testing the Angle of Disengagement, Reciprocating Internal Combustio
- EN-ISO-14314 - Reciprocal Internal Combustion Engines - Recoil Starting Equipment - General Safety Re
- EN-ISO-8528-13 - Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety
- JIS-B-8008-9 - Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
- PD-ISO-19425-TC - Tracked Changes. Reciprocating internal combustion engines. Measurement method for air cleaners. Sound power level of combustion air inlet noise and insertion loss using sound pressure
- SS-EN-10090 - Valve steels and alloys for internal combustion engines
- SS-EN-12601 - Reciprocating internal combustion engine driven generating sets - Safety
- SS-EN-1679-1 - Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines
- SS-EN-1834-1 - Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres
- SS-EN-1834-2 - Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
- SS-EN-1834-3 - Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres
- SS-EN-ISO-11102-1 - Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102- 1:1997)
- SS-EN-ISO-11102-2 - Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)
- SS-EN-ISO-14314 - Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)
- SS-EN-ISO-19581 - Measurement of radioactivity - Gamma emitting radionuclides - Rapid screening method using scintillation detector gamma-ray spectrometry (ISO 19581:2017)
- SS-EN-ISO-8178-1 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions (ISO 8178-1:1996)
- SS-EN-ISO-8178-2 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site (ISO 8178-2:1996)
- SS-EN-ISO-8178-4 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Test cycles for different engine applications (ISO 8178-4:1996)
- SS-EN-ISO-8178-5 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels (ISO 8178-5:1997)
- SS-EN-ISO-8178-6 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test (ISO 8178-6:2000)
- SS-EN-ISO-8528-10 - Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise (ISO 8528-10:2022)
- SS-EN-ISO-8528-13 - Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016)
- SS-ISO-11424 - Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification (ISO 11424:2023, IDT)
- SS-ISO-14396 - Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178 (ISO 14396:2002, IDT)
- SS-ISO-16526-3 - Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011, IDT)
- SS-ISO-19013-1 - Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels (ISO 19013-1:2019, IDT)
- SS-ISO-19013-2 - Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 2: Gasoline fuels (ISO 19013-2:2005, IDT)
- SS-ISO-3046-1 - Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use (ISO 3046-1:2002, IDT)
- SS-ISO-3046-3 - Reciprocating internal combustion engines - Performance - Part 3: Test measurements (ISO 3046-3:2006, IDT)
- SS-ISO-3046-4 - Reciprocating internal combustion engines - Performance - Part 4: Speed governing (ISO 3046-4:2009, IDT)
- SS-ISO-3046-5 - Reciprocating internal combustion engines - Performance - Part 5: Torsional vibrations (ISO 3046-5:2001, IDT)
- SS-ISO-3046-6 - Reciprocating internal combustion engines - Performance - Part 6: Overspeed protection (ISO 3046-6:1990, IDT)
- SS-ISO-4639-1 - Rubber tubing and hoses for fuel circuits for internal combustion engines - Specification - Part 1: Conventional liquid fuels
- SS-ISO-4639-2 - Rubber tubing and hoses for fuel circuits for internal-combustion engines - Specification - Part 2: Oxygenated fuels
- SS-ISO-4639-3 - Rubber tubing and hoses for fuel circuits for internal-combustion engines - Specification - Part 3: Oxidized fuels
- SS-ISO-7967-5 - Reciprocating internal combustion engines - Vocabulary of components and systems - Part 5: Cooling systems (ISO 7967-5:2010, IDT)