Document Center List of Standards on Transformers. Reactors Instrument Transformers, See 17.220.20
ICS Code 29.180
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D2759 - Standard Practice for Sampling Gas from a Transformer Under Positive Pressure
- ASTM-D3305 - Standard Practice for Sampling Small Gas Volume in a Transformer (Withdrawn 2014)
BSI:
- BS-171 - Specification for power transformers
- BS-171-1 - Power transformers. General
- BS-171-3 - Specification for Insulation Levels and Dielectric Tests
- BS-171-5 - Specification for Ability To Withstand Short Circuit
- BS-2538 - Specification for air-cooled flameproof single-phase lighting transformer units supplied from high voltage systems
- BS-2562 - Specification for cable boxes for transformers and reactors
- BS-3399 - Specification for transformers for use in ships
- BS-3535-1 - Isolating transformers and safety isolating transformers. General requirements
- BS-3535-2 - Specification for Transformers for Reduced System Voltage
- BS-3938 - Specification for current transformers
- BS-3941 - Specification for voltage transformers
- BS-4727-2-GROUP-04 - Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering
- BS-4819 - Resistance Welding Water-Cooled Transformers of the Press Package and Portable Types;
- BS-4819-2 - Resistance welding water-cooled transformers of the press-package and portable types.
- BS-5067 - Specification for flameproof transformers for use in mines
- BS-6436 - Specification for ground mounted distribution transformers for cable box or unit substation connection
- BS-6554-1 - Part 1: Specification for Dimensions, Mechanical Characteristics & Electrical Testing
- BS-6600-1 - Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment
- BS-6600-10 - Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment
- BS-7125 - Specification for transformers for resistance welding machines
- BS-7452 - Specification for separating transformers, autotransformers, variable transformers and reactors
- BS-7565 - Specification for traction transformers and inductors
- BS-7616 - Specification for bushings for liquid filled transformers above 1 kV and up to 36 kV
- BS-7625 - Specification for voltage transformers
- BS-7626 - Specification for current transformers
- BS-7729 - Specification for Instrument Transformers. Three-Phase Voltage Transformers for Voltag
- BS-7806 - Dry-Type Power Transformers
- BS-7821-1 - Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. General requirements and requirements for transformers with highest voltage for equipment not exceeding 24 kV
- BS-7821-3 - Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Supplementary requirements for transformers with highest voltage for equipment equal to 36 kV
- BS-7821-4 - Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Determination of the power rating of a transformer loaded with non-sinusoidal currents
- BS-7821-6 - Three Phase Oil-Immersed Distribution Transformers, 50 Hz, From 50 To 2500 Kva With Hi
- BS-7844-3 - Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Determination of the power rating of a transformer loaded with non-sinusoidal current
- BS-7866 - Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers
- BS-7877 - Busbar Bushings Up To 1 Kv & From 1,25 Ka To 5 Ka, for Liquid Filled Transformers
- BS-9720 - Specification for custom-built transformers and inductors of assessed quality: generic data and methods of test
- BS-9733 - Sectional specification for pulse transformers of assessed quality for use in electronic equipment for capability approval
- BS-EN-138100 - Harmonized system of quality assessment for electronic components. Sectional specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required)
- BS-EN-50152-3-2 - Railway applications. Fixed installations. Particular requirements for a.c. switchgear
- BS-EN-50152-3-2-TC - Tracked Changes. Railway applications. Fixed installations. Particular requirements for a.c. switchgear
- BS-EN-50152-3-3 - Railway applications. Fixed installations. Particular requirements for a.c. switchgear
- BS-EN-50216-1 - Power transformers and reactor fittings
- BS-EN-50216-10 - Power transformer and reactor fittings
- BS-EN-50216-11 - Power transformer and reactor fittings
- BS-EN-50216-3 - Power transformer and reactor fittings
- BS-EN-50216-4 - Power transformer and reactor fittings
- BS-EN-50216-4-TC - Tracked Changes. Power transformer and reactor fittings
- BS-EN-50216-5 - Power transformer and reactor fittings
- BS-EN-50216-6 - Power transformers and reactor fittings
- BS-EN-50216-8 - Power transformer and reactor fittings
- BS-EN-50216-9 - Power transformer and reactor fittings
- BS-EN-50243-TC - Tracked Changes. Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers
- BS-EN-50299 - Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV
- BS-EN-50299-1 - Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV
- BS-EN-50299-2 - Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV
- BS-EN-50329 - Railway applications. Fixed installations. Traction transformers
- BS-EN-50386 - Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers
- BS-EN-50464-1 - Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV
- BS-EN-50464-2-1 - Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV
- BS-EN-50464-2-2 - Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV
- BS-EN-50464-2-3 - Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV
- BS-EN-50464-3 - Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Determination of the power rating of a transformer loaded with non-sinusoidal currents
- BS-EN-50464-4 - Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV
- BS-EN-50541-1 - Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3150 kVA, with highest voltage for equipment not exceeding 36 kV
- BS-EN-50541-2 - Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV
- BS-EN-50588-1 - Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV
- BS-EN-50588-1-TC - Tracked Changes. Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV
- BS-EN-50588-2 - Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV
- BS-EN-50588-2-TC - Tracked Changes. Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV
- BS-EN-50588-3 - Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV
- BS-EN-50588-3-TC - Tracked Changes. Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV
- BS-EN-50588-4 - Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV
- BS-EN-50588-4-TC - Tracked Changes. Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV
- BS-EN-50629 - Energy performance of large power transformers (Um > 36 kV or Sr 40 MVA)
- BS-EN-50645 - Ecodesign requirements for small power transformers
- BS-EN-50708-1-1 - Power transformers. Additional European requirements
- BS-EN-50708-1-2 - Power transformers. Additional European requirements
- BS-EN-50708-2-1 - Power transformers. Additional European requirements
- BS-EN-50708-2-4 - Power transformers. Additional European requirements
- BS-EN-50708-2-5 - Power transformers. Additional European requirements
- BS-EN-50708-2-6 - Power transformers. Additional European requirements
- BS-EN-50708-3-1 - Power transformers. Additional European requirements
- BS-EN-50708-3-4 - Power transformers. Additional European requirements
- BS-EN-60044-1 - Instrument transformers. Current transformers
- BS-EN-60044-2 - Instrument transformers. Inductive voltage transformers
- BS-EN-60044-3 - Instrument transformers
- BS-EN-60044-6 - Instrument transformers
- BS-EN-60076-1 - Power transformers
- BS-EN-60076-10 - Power transformers
- BS-EN-60076-10-TC - Tracked Changes. Power transformers
- BS-EN-60076-11 - Power transformers
- BS-EN-60076-13 - Power transformers
- BS-EN-60076-14 - Power transformers
- BS-EN-60076-16 - Power transformers
- BS-EN-60076-18 - Power transformers
- BS-EN-60076-19 - Power transformers
- BS-EN-60076-2 - Power transformers
- BS-EN-60076-22-2 - Power transformer and reactor cooling equipment
- BS-EN-60076-3 - Power transformers
- BS-EN-60076-4 - Power transformers
- BS-EN-60076-5 - Power transformers
- BS-EN-60076-6 - Power transformers
- BS-EN-60214-1 - Tap-changers
- BS-EN-60289 - Reactors
- BS-EN-60296 - Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear
- BS-EN-60310 - Railway applications. Traction transformers and inductors on board rolling stock
- BS-EN-60599 - Mineral oil-filled electrical equipment in service. Guidance on the interpretation of dissolved and free gases analysis
- BS-EN-60599-TC - Tracked Changes. Mineral oil-filled electrical equipment in service. Guidance on the interpretation of dissolved and free gases analysis
- BS-EN-60726 - Dry-type power transformers
- BS-EN-60742 - Isolating transformers and safety isolating transformers. Requirements
- BS-EN-60938-1 - Fixed inductors for electromagnetic interference suppression
- BS-EN-60938-2 - Fixed inductors for electromagnetic interference suppression
- BS-EN-60938-2-1 - Fixed inductors for electromagnetic interference suppression
- BS-EN-60938-2-2 - Fixed inductors for electromagnetic interference suppression
- BS-EN-61248-1 - Transformers and inductors for use in electronic and telecommunication equipment. Generic specification
- BS-EN-61248-2 - Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for signal transformers on the basis of the capability approval procedure
- BS-EN-61248-3 - Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for power transformers on the basis of the capability approval procedure
- BS-EN-61248-4 - Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure
- BS-EN-61248-5 - Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for pulse transformers on the basis of the capability approval procedure
- BS-EN-61378-1 - Convertor transformers
- BS-EN-61378-2 - Convertor transformers
- BS-EN-61558-1 - Safety of power transformers, power supplies, reactors and similar products
- BS-EN-61558-2-1 - Safety of power transformers, power supplies, reactors and similar products
- BS-EN-61558-2-10 - Safety of transformers, reactors, power supply units and combinations thereof
- BS-EN-61558-2-12 - Safety of transformers, reactors, power supply units and combinations thereof
- BS-EN-61558-2-13 - Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V
- BS-EN-61558-2-14 - Safety of transformers, reactors, power supply units and combination thereof
- BS-EN-61558-2-15 - Safety of transformers, reactors, power supply units and combinations thereof
- BS-EN-61558-2-16 - Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V
- BS-EN-61558-2-19 - Safety of power transformers, power supply units and similar
- BS-EN-61558-2-2 - Safety of power transformers, power supplies, reactors and similar products
- BS-EN-61558-2-20 - Safety of transformers, reactors, power supply units and combinations thereof
- BS-EN-61558-2-23 - Safety of transformers, reactors, power supply units and combinations thereof
- BS-EN-61558-2-26 - Safety of transformers, reactors, power supply units and combinations thereof
- BS-EN-61558-2-3 - Safety of transformers, reactors, power supply units and combinations thereof
- BS-EN-61558-2-5 - Safety of transformers, reactors, power supply units and combinations thereof
- BS-EN-61558-2-6 - Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V
- BS-EN-61558-2-7 - Safety of power transformers, power supplies, reactors and similar products
- BS-EN-61558-2-9 - Safety of transformers, reactors, power supply units and combinations thereof
- BS-EN-61596 - Magnetic oxide EP-cores and associated parts for use in inductors and transformers. Dimensions
- BS-EN-61753-056-2 - Fibre optic interconnecting devices and passive components. Performance standard
- BS-EN-62041 - Safety of transformers, reactors, power supply units and combinations thereof. EMC requirements
- BS-EN-IEC-60076-11 - Power transformers
- BS-EN-IEC-60076-11-TC - Tracked Changes. Power transformers
- BS-EN-IEC-60076-22-1 - Power transformers
- BS-EN-IEC-60076-22-3 - Power transformers
- BS-EN-IEC-60076-22-4 - Power transformers
- BS-EN-IEC-60076-22-5 - Power transformers
- BS-EN-IEC-60076-22-6 - Power transformers
- BS-EN-IEC-60076-22-7 - Power transformers
- BS-EN-IEC-60076-22-8 - Power transformers
- BS-EN-IEC-60076-24 - Power transformers
- BS-EN-IEC-60296 - Fluids for electrotechnical applications. Mineral insulating oils for electrical equipment
- BS-EN-IEC-60599 - Mineral oil-filled electrical equipment in service. Guidance on the interpretation of dissolved and free gases analysis
- BS-EN-IEC-60938-1 - Fixed inductors for electromagnetic interference suppression
- BS-EN-IEC-61007 - Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
- BS-EN-IEC-61558-1 - Safety of transformers, reactors, power supply units and combinations thereof
- BS-EN-IEC-61869-10 - Instrument transformers
- BS-EN-IEC-61869-11 - Instrument transformers
- BS-EN-IEC-61869-13 - Instrument transformers
- BS-EN-ISO-10656 - Resistance welding equipment. Transformers. Integrated transformers for welding guns
- BS-EN-ISO-22829 - Resistance welding equipment. Transformers. Integrated transformer-rectifier units for welding guns operating at 1 000 Hz
- BS-EN-ISO-22829-TC - Tracked Changes. Resistance welding equipment. Transformers. Integrated transformer-rectifier units for welding guns operating at 1 000 Hz
- BS-EN-ISO-5826 - Resistance welding equipment. Transformers. General specifications applicable to all transformers
- BS-IEC-60076-10-1 - Power transformers
- BS-IEC-60076-15 - Power transformers
- BS-IEC-60076-21 - Power transformers
- BS-IEC-60092-303 - Electrical installation in ships
- BS-IEC-61378-3 - Converter transformers
- BS-IEC/IEEE-60214-2 - TAP-changers
- BS-ISO-10656 - Resistance welding equipment. Transformers. Integrated transformers for welding guns
- BS-ISO-18095 - Condition monitoring and diagnostics of power transformers
- BS-ISO-22829 - Resistance Welding, Transformer-Rectifier for Welding Guns With Integrated Transformer
- CP-2012-1 - Code of practice for foundations for machinery. Foundations for reciprocating machines
- DD-CLC-50537-1 - Railway applications. Mounted parts of the traction transformer and cooling system
- DD-CLC-50537-2 - Railway applications. Mounted parts of the traction transformer and cooling system
- DD-CLC-50537-3 - Railway applications. Mounted parts of the traction transformer and cooling system
- DD-CLC-50537-4 - Railway applications. Mounted parts of the traction transformer and cooling system
- DD-IEC-60076-14 - Power transformers
- PD-IEC-60076-19 - Power transformers. Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors
- PD-IEC-60076-20 - Power transformers. Energy efficiency
- PD-IEC-60076-23 - Power transformers
- PD-IEC-60076-26 - Power transformers
IEC:
- IEC-146-1-3 - Semiconductor convertors - General requirements and line commutated convertors - Part 1-3: Transformers and reactors
- IEC-60044-1-2 - Amendment 2: Instrument Transformers - Part 1: Current Transformers
- IEC-60044-2 - Part 2: Inductive Voltage Transformers, Instrument Transformers
- IEC-60044-2-2 - Amendment 2: Instrument Transformers, Part 2: Inductive Voltage Transformers
- IEC-60044-3 - Part 3: Combined Transformers, Instrument Transformers
- IEC-60076-1 - Power transformers - Part 1: General
- IEC-60076-10 - Power transformers - Part 10: Determination of sound levels
- IEC-60076-10-1 - Power transformers - Part 10-1: Determination of sound levels - Application guide
- IEC-60076-10-1-AM1 - Amendment 1 - Power transformers - Part 10-1: Determination of sound levels - Application guide
- IEC-60076-11 - Power transformers - Part 11: Dry-type transformers
- IEC-60076-11-RL - Power transformers - Part 11: Dry-type transformers
- IEC-60076-12 - Power transformers - Part 12: Loading guide for dry-type power transformers
- IEC-60076-13 - Power transformers - Part 13: Self-protected liquid-filled transformers
- IEC-60076-14 - Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials
- IEC-60076-15 - Power transformers - Part 15: Gas-filled power transformers
- IEC-60076-16 - Power transformers - Part 16: Transformers for wind turbine applications
- IEC-60076-18 - Power transformers - Part 18: Measurement of frequency response
- IEC-60076-19 - Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of losses in power transformers and reactors
- IEC-60076-2 - Power transformers - Part 2: Temperature rise for liquid-immersed transformers
- IEC-60076-20 - Power transformers - Part 20: Energy efficiency
- IEC-60076-21 - Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators
- IEC-60076-22-1 - Power transformers - Part 22-1: Power transformer and reactor fittings . Protective devices
- IEC-60076-22-2 - Power transformers - Part 22-2: Power transformer and reactor fittings - Removable radiators
- IEC-60076-22-3 - Power transformers - Part 22-3: Power transformer and reactor fittings - Insulating liquid to air heat exchangers
- IEC-60076-22-4 - Power transformers - Part 22-4: Power transformer and reactor fittings - Insulating liquid to water heat exchangers
- IEC-60076-22-5 - Power transformers - Part 22-5: Power transformer and reactor fittings - Electric pumps for transformers
- IEC-60076-22-6 - Power transformers - Part 22-6: Power transformer and reactor fittings - Electric fans for transformers
- IEC-60076-22-7 - Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings
- IEC-60076-22-8 - Power transformers - Part 22-8: Power transformer and reactor fittings - Devices suitable for use in communication networks
- IEC-60076-23 - Power transformers - Part 23: DC magnetic bias suppression devices
- IEC-60076-24 - Power transformers - Part 24: Specification of voltage regulating distribution transformers (VRDT)
- IEC-60076-25 - Power transformers - Part 25: Neutral grounding resistors
- IEC-60076-3 - Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
- IEC-60076-3-AM1 - Amendment 1 - Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
- IEC-60076-4 - Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors
- IEC-60076-5 - Power transformers - Part 5: Ability to withstand short circuit
- IEC-60076-6 - Power transformers - Part 6: Reactors
- IEC-60076-7 - Power transformers - Part 7: Loading guide for mineral-oil-immersed power transformers
- IEC-60076-7-RL - Power transformers - Part 7: Loading guide for mineral-oil-immersed power transformers
- IEC-60076-8 - Power transformers - Part 8: Application guide
- IEC-60076 SERIES - IEC 60076 - Power Transformers Package
- IEC-60214-1 - Tap-changers - Part 1: Performance requirements and test methods
- IEC-60214-2 - Tap-changers - Part 2: Application guide
- IEC-60335-2-29-1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
- IEC-60599 - Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
- IEC-60599-1 - Amendment 1 - Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis
- IEC-60599 CMV - Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
- IEC-60599-RL - Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
- IEC-61248-7 - Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high-frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure
- IEC-61378-1 - Converter transformers - Part 1: Transformers for industrial application
- IEC-61378-2 - Convertor transformers - Part 2: Transformers for HVDC applications
- IEC-61378-3 - Converter transformers - Part 3: Application guide
- IEC-61558-1 - Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
- IEC-61558-1-1 - Amendment 1 - Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
- IEC-61558-1-RL - Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
- IEC-61558-2-1 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
- IEC-61558-2-10 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V
- IEC-61558-2-12 - Safety of transformers, reactors, power supply units and combination thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
- IEC-61558-2-13 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-13: Particular requirements and tests for auto-transformers and power supply units incorporating auto-transformers for general applications
- IEC-61558-2-14 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers for general applications
- IEC-61558-2-14-RL - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers for general applications
- IEC-61558-2-15 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for medical IT systems for the supply of medical locations
- IEC-61558-2-15 EXV - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for medical IT systems for the supply of medical locations
- IEC-61558-2-15-RL - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for medical IT systems for the supply of medical locations
- IEC-61558-2-16 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units for general applications
- IEC-61558-2-16-AM1 - Amendment 1 - Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units
- IEC-61558-2-17 - Part 2: Particular Requirements for Transformers for Switchmode Power Supplies, Safety Of
- IEC-61558-2-19 - Part 2-19: Particular Requirements for Perturbation Attenuation Transformers, Safety of Po
- IEC-61558-2-2 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transformers
- IEC-61558-2-20 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors
- IEC-61558-2-20-RL - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors
- IEC-61558-2-23 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites
- IEC-61558-2-26 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units all for saving energy and other purposes
- IEC-61558-2-3 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners
- IEC-61558-2-4 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications
- IEC-61558-2-5 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units
- IEC-61558-2-6 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers for general applications
- IEC-61558-2-7 - Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys
- IEC-61558-2-8 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes
- IEC-61558-2-9 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps
- IEC-616 - Terminal and tapping markings for power transformers
- IEC-62021-1 - Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration
- IEC-62032 - Guide for the Application, Specification and Testing of Phase-Shifting Transformers
- IEC-62041 - Transformers, power supplies, reactors and similar products - EMC requirements
- IEC-989 - Separating transformers, autotransformers, variable transformers and reactors.
- IEC/IEEE-60076-57-12 - Power transformers - Part 57-1202: Liquid immersed phase-shifting transformers
- IEC/IEEE60076-57-129 - Power transformers - Part 57-129: Transformers for HVDC applications
- IEC/IEEE-60214-2 - Tap-changers - Part 2: Application guidelines
ISO:
- ISO-10656 - Resistance welding equipment - Transformers - Integrated transformers for welding guns
- ISO-12166 - Resistance welding equipment - Particular specifications applicable to transformers with one secondary winding for multi-spot welding, as used in the automobile industry
- ISO-18095 - Condition monitoring and diagnostics of power transformers
- ISO-22829 - Resistance welding equipment - Transformers - Integrated transformer-rectifier units for welding guns operating at 1 000 Hz
- ISO-5826 - Resistance welding equipment - Transformers - General specifications applicable to all transformers
Other SDOs:
- DIN-ISO-10656 - Resistance welding equipment - Transformers - Integrated transformers for welding guns
- DIN-ISO-12166 - Resistance Welding Equipment - Particular Specifications Applicable To Transformers Wi
- EN-50216-1 - Power Transformers & Reactor Fittings, General
- EN-50216-10 - Power Transformer & Reactor Fittings, Oil-To-Air Heat Exchange
- EN-50216-11 - Part 11: Oil & Winding Temperature Indicators, Power Transformer & Reactor Fittings
- EN-50216-12 - Power transformer and reactor fittings - Part 12: Fans
- EN-50216-3 - Protective Relay for Hermetically Sealed Liquid-Immersed Transformers & Reactors Witho
- EN-50216-4 - Power transformer and reactor fittings - Part 4: Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly)
- EN-50216-6 - Power Transformers & Reactor Fittings, Cooling Equipment, Remable Radiators for Oil-Im
- EN-50216-8 - Power Transformer & Reactor Fittings, Butterfly Valves for Insulating Liquid Circuits
- EN-50216-9 - Power Transformer & Reactor Fittings, Oil-To-Water Heat Exchangers
- EN-50238-1 - Railway applications - Compatibility between rolling stock and train detection systems
- EN-50299-1 - Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 1: Fluid-filled cable terminations
- EN-50299-2 - Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 2: Dry-type cable terminations
- EN-50329 - Railway Applications - Fixed Installations - Traction Transformers
- EN-50386 - Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers
- EN-50464-1 - Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements
- EN-50464-2-1 - Three-Phase Oil-Immersed Distribution Transformers 50 Hz, From 50 Kva To 2500 Kva High
- EN-50464-2-2 - Three-Phase Oil-Immersed Distribution Transformers 50 Hz, From 50 Kva To 2 500 Kva Wit
- EN-50464-2-3 - Three-Phase Oil-Immersed Distribution Transformers 50 Hz, From 50 Kva To 2500 Kva With
- EN-50464-3 - Three-Phase Oil-Immersed Distribution Transformers 50 Hz, From Kva To 2500 Kva With Hi
- EN-50464-4 - Three-Phase Oil-Immersed Distribution Transformers 50 Hz, From 50 Kva To 2500 Kva With
- EN-50464-4-A1 - Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 4: Requirements and tests concerning pressurised corrugated tanks
- EN-50541-1 - Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements
- EN-50541-2 - Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV - Part 2: Determination of loadability of a transformer loaded with non-sinusoidal current
- EN-50588-1 - Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements
- EN-50629 - Energy performance of large power transformers (Um > 36 kV or Sr = 40 MVA)
- EN-50645 - Ecodesign requirements for small power transformers
- EN-60076-1 - Power transformers - Part 1: General
- EN-60076-10 - Power transformers - Part 10: Determination of sound levels
- EN-60076-13 - Power Transformers, Self-Protected Liquid-Filled Transformers
- EN-60076-14 - Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials
- EN-60076-18 - Power transformers - Part 18: Measurement of frequency response
- EN-60076-19 - Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors
- EN-60076-2 - Power transformers - Part 2: Temperature rise for liquid-immersed transformers
- EN-60076-3 - Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
- EN-60214-1 - Tap-changers - Part 1: Performance requirements and test methods
- EN-60599 - Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
- EN-61181 - Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
- EN-61248-1 - Transformers & Inductors for Use in Electronic & Telecommunication Equipment, Generic
- EN-61248-2 - Transformers & Inductors for Use in Electronic & Telecommunication Equipment, Sectiona
- EN-61248-3 - Transformers & Inductors for Use in Electronic & Telecommunication Equipment, Sectiona
- EN-61248-4 - Transformers & Inductors for Use in Electronic & Telecommunication Equipment, Sectiona
- EN-61248-5 - Transformers & Inductors for Use in Electronic & Telecommunication Equipment, Sectiona
- EN-61248-6 - Transformers & Inductors for Use in Electronic & Telecommunication Equipment, Sectiona
- EN-61378-1 - Convertor transformers - Part 1: Transformers for industrial applications
- EN-61558-1 - Safety of Power Transformers, Power Supplies, Reactors & Similar Products, General Req
- EN-61558-2-1 - Safety of Power Transformers, Power Supplies, Reactors & Similar Products, Particular
- EN-61558-2-10 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V
- EN-61558-2-12 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
- EN-61558-2-13 - Safety of Transformers, Reactors, Power Supply Units & Similar Products for Supply Vol
- EN-61558-2-14 - Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
- EN-61558-2-15 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for the supply of medical locations
- EN-61558-2-16 - Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units
- EN-61558-2-2 - Safety of Power Transformers, Power Supplies, Reactors & Similar Products, Particular
- EN-61558-2-20 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors
- EN-61558-2-23 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites
- EN-61558-2-26 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes
- EN-61558-2-5 - Part 2-5: Particular Requirements & Tests for Transformers for Shavers, Power Supply U
- EN-61558-2-6 - Part 2-6: Particular Requirements & Tests for Safety Isolating Transformers & Power Su
- EN-61558-2-7 - Safety of Power Transformers, Power Suplies, Reactors & Similar Products, Particulare
- EN-61558-2-9 - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps
- EN-61596 - Magnetic OXIDEEP-Cores & Associated Parts for Use in Inductors & Transformers, Dimens
- EN-62041 - Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements
- EN-IEC-60076-11 - Power transformers - Part 11: Dry-type transformers
- EN-IEC-60076-22-1 - Power transformers - Part 22-1: Power transformer and reactor fittings - Protective devices (IEC 60076-22-1:2019)
- EN-IEC-60076-22-3 - Power transformers - Part 22-3: Power transformer and reactor fittings - Insulating liquid to air heat exchangers (IEC 60076-22-3:2019)
- EN-IEC-60076-22-4 - Power transformers - Part 22-4: Power transformer and reactor fittings - Insulating liquid to water heat exchangers (IEC 60076-22-4:2019)
- EN-IEC-61558-1 - Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests (IEC 61558-1:2017)
- EN-ISO-22829 - Resistance Welding, Transformer-Rectifier for Welding Guns With Integrated Transformer
- EN-ISO-5826 - Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:2014)
- JIS-C-1736 - Instrument transformers for metering service
- SS-EN-61558-1 - Safety of power transformers, power supply units and similar - Part 1: General requirements and tests
- SS-EN-ISO-10656 - Resistance welding equipment - Transformers - Integrated transformers for welding guns (ISO 10656:2016)
- SS-EN-ISO-22829 - Resistance welding equipment - Transformers - Integrated transformer-rectifier units for welding guns operating at 1 000 Hz (ISO 22829:2017)
- SS-EN-ISO-5826 - Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:2014)
- SS-ISO-10656 - Resistance welding equipment - Transformers - Integrated transformers for welding guns (ISO 10656:2016, IDT)