Document Center List of Standards on Ground Service And Maintenance Equipment
ICS Code 49.100
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-F302 - Standard Practice for Field Sampling of Aerospace Fluids in Containers
- ASTM-F483 - Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
BSI:
- BS-185-13 - Glossary of aeronautical and astronautical terms
- BS-2C-12 - Specification for jacking pads for aircraft
- BS-2C-13 - Specification for sizes of aircraft gravity filling orifices and associated replenishment nozzles (metric series)
- BS-2C-4 - Specification for coupling dimensions for aero-engine refrigerant pressure replenishment connections
- BS-2C-5 - Specification for mating dimensions for liquid oxygen replenishment couplings
- BS-3224-1 - Lighting fittings for civil land aerodromes
- BS-3224-4 - Lighting fittings for civil land aerodromes
- BS-3224-5 - Lighting fittings for civil land aerodromes. Specification for inset lighting units
- BS-3224-6 - Lighting fittings for civil land aerodromes
- BS-3224-B2 - Specification for lighting fittings for civil land aerodromes. Approach lights.High intensity blister approach lighting fittings
- BS-3224-D-D3 - Specification for lighting fittings for civil land aerodromes. Runway lights.Blister type runway edge lighting fittings
- BS-3224-D-D4 - Specification for lighting fittings for civil land aerodromes. Runway lights.Runway centre line lighting fittings
- BS-3224-D-D5 - Specification for lighting fittings for civil land aerodromes. Runway lights.Runway-touchdown zone lighting fittings
- BS-3224-D-D8 - Specification for lighting fittings for civil land aerodromes. Runway lights.Blister type runway-threshold lighting fittings
- BS-3224-F-F2 - Specification for lighting fittings for civil land aerodromes. Taxiway lights.Blister type low intensity centre-line taxiway lighting fittings
- BS-3224-F-F3 - Specification for lighting fittings for civil land aerodromes. Taxiway lights.Blister type high intensity centre line taxiway lighting fittings
- BS-3C-14 - Specification for coupling requirements for aircraft pressure fuelling connection
- BS-4C-14 - Specification for aircraft pressure refuelling connectors
- BS-C-10 - Coupling dimensions for aircraft ground air-conditioning connections
- BS-C-13 - Sizes of gravity filling orifices on aircraft
- BS-C-15 - Specification for coupling dimensions for aircraft-to-tractor tow bar connections
- BS-C-16 - Specification for dimensions for gaseous oxygen replenishment couplings for aircraft
- BS-C-20 - Specification for aircraft gaseous oxygen replenishment connection (inch dimensions)
- BS-C-21-1 - Specification for interface requirements for aircraft noseleg to towbar attachment fittings.
- BS-C-3 - Specification for aircraft material. Coupling dimensions for aircraft pressure re-oiling connection
- BS-C-9 - Specification for coupling dimensions for high pressure air charging valves for aircraft
- BS-EN-12312-1 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-10 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-12 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-12-TC - Tracked Changes. Aircraft ground support equipment. Specific requirements
- BS-EN-12312-13 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-13-TC - Tracked Changes. Aircraft ground support equipment. Specific requirements
- BS-EN-12312-14 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-15 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-16 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-17 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-18 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-19 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-1-TC - Tracked Changes. Aircraft ground support equipment. Specific requirements
- BS-EN-12312-2 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-20 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-3 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-4 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-4-TC - Tracked Changes. Aircraft ground support equipment. Specific requirements
- BS-EN-12312-5 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-6 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-6-TC - Tracked Changes. Aircraft ground support equipment. Specific requirements
- BS-EN-12312-7 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-8 - Aircraft ground support equipment. Specific requirements
- BS-EN-12312-8-TC - Tracked Changes. Aircraft ground support equipment. Specific requirements
- BS-EN-12312-9 - Aircraft ground support equipment. Specific requirements
- BS-EN-1361 - Rubber Hoses & Hose Assemblies for Aviation Fuel Handling, Specification
- BS-EN-1915-1 - Aircraft ground support equipment. General requirements
- BS-EN-1915-1-TC - Tracked Changes. Aircraft ground support equipment. General requirements
- BS-EN-1915-2 - Aircraft ground support equipment. General requirements
- BS-EN-ISO-1825-TC - Tracked Changes. Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification
- BS-ISO-10254 - Air cargo and ground equipment. Vocabulary
- BS-ISO-10842 - Aircraft. Ground service connections. Locations and types
- BS-ISO-10842-TC - Tracked Changes. Aircraft. Ground service connections. Locations and types
- BS-ISO-11075 - Aircraft. De-icing/anti-icing fluids. ISO type I
- BS-ISO-11076 - Aircraft. Deicing/anti-icing methods on the ground
- BS-ISO-11076-TC - Tracked Changes. Aircraft. Deicing/anti-icing methods on the ground
- BS-ISO-11077 - Aircraft ground equipment. De-icers. Functional requirements
- BS-ISO-11078 - Aircraft. De-icing/anti-icing fluids. ISO type II, III and IV
- BS-ISO-11532 - Aircraft ground equipment. Graphical symbols
- BS-ISO-11532-TC - Tracked Changes. Aircraft ground equipment. Graphical symbols
- BS-ISO-12604-1 - Aircraft ground handling. Checked baggage
- BS-ISO-12604-2 - Aircraft ground handling. Checked baggage
- BS-ISO-14625 - Space systems. Ground support equipment for use at launch, landing or retrieval sites. General requirements
- BS-ISO-14625-TC - Tracked Changes. Space systems. Ground support equipment for use at launch, landing or retrieval sites. General requirements
- BS-ISO-1464 - Aerospace. Tripod jacks. Clearance dimensions
- BS-ISO-15845 - Aircraft ground equipment. Boarding vehicle for persons with reduced mobility. Functional and safety requirements
- BS-ISO-16004 - Aircraft ground equipment. Passenger boarding bridge or transfer vehicle. Interface requirements with aircraft doors
- BS-ISO-17775 - Aircraft. Ground-service connections. Potable water, toilet-flush water and toilet drain
- BS-ISO-2026 - Aircraft. Connections for starting engines by air
- BS-ISO-20683-1 - Aircraft ground equipment. Nose gear towbarless towing vehicle (TLTV). Design, testing and maintenance requirements
- BS-ISO-20683-2 - Aircraft ground equipment. Design, testing and maintenance requirements for nose gear towbarless towing vehicle (TLTV)
- BS-ISO-21100 - Air cargo unit load devices. Performance requirements and test parameters
- BS-ISO-21785 - Air cargo unit load devices. Load distribution model
- BS-ISO-23748 - Aerospace series. O-ring grooves. Dimensions
- BS-ISO-27471 - Aircraft ground equipment. Upper deck loader. Functional requirements
- BS-ISO-32312-11 - Aircraft ground support equipment. Specific requirements
- BS-ISO-43 - Aircraft. Jacking pads
- BS-ISO-461-1 - Aircraft. Connectors for ground electrical supplies
- BS-ISO-6858 - Aircraft. Ground support electrical supplies. General requirements
- BS-ISO-6966-1 - Aircraft ground equipment. Basic requirements
- BS-ISO-6966-2 - Aircraft ground equipment. Basic requirements
- BS-ISO-6967 - Aircraft ground equipment. Main deck container/pallet loader. Functional requirements
- BS-ISO-6968 - Aircraft ground equipment. Lower deck loader. Functional requirements
- BS-ISO-7718-1 - Aircraft. Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle
- BS-ISO-7718-2 - Aircraft. Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle
- BS-ISO-8267-1 - Aircraft. Tow bar attachment fittings interface requirements
- BS-ISO-8267-2 - Aircraft. Tow bar attachment fittings interface requirements
- BS-ISO-8267-2-TC - Tracked Changes. Aircraft. Tow bar attachment fittings interface requirements
- BS-ISO-9667 - Aircraft ground support equipment. Tow bars
- BS-M-44 - Specification for identification of aircraft servicing, maintenance, ground handling and safety/hazard points
- BS-M-77 - Self-propelled de-icing/anti-icing vehicles. Functional requirements
- BS-M-81 - Air Cargo Equipment, Wide Body Aircraft Lower Deck Container/Pallet Loader, Functional
- BS-Z-100 - Space systems. Ground support equipment for use at launch, landing, or retrieval sites. General requirements
- DD-ISO/PAS-21100 - Air cargo unit load devices. Performance requirements and test parameters
ISO:
- ISO-102 - Aircraft - Gravity filling orifices
- ISO-1021 - Aircraft - Engine nacelle fire extinguisher apertures and doors
- ISO-1022 - Aerospace - Gaseous oxygen replenishment connection for use in fluid systems (old type) - Dimensions (Inch series) (Not valid for new designs)
- ISO-1023 - Aircraft - High pressure air charging valves
- ISO-10254 - Air cargo and ground equipment - Vocabulary
- ISO-1034 - Aircraft - Ground air-conditioning connections
- ISO-10841 - Aircraft - Catering vehicle for large capacity aircraft - Functional requirements
- ISO-10842 - Aircraft - Ground service connections - Locations and types
- ISO-11 - Aircraft - Ground pressure testing connections for pressure cabins
- ISO-11075 - Aircraft - De-icing/anti-icing fluids - ISO type I
- ISO-11076 - Aircraft - De-icing/anti-icing methods on the ground
- ISO-11077 - Aircraft ground equipment - De-icers - Functional requirements
- ISO-11078 - Aircraft - De-icing/anti-icing fluids - ISO types II, III and IV
- ISO-11217 - Aerospace - Hydraulic system fluid contamination - Location of sampling points and criteria for sampling
- ISO-11241 - Aircraft - Aircraft engine transport devices
- ISO-11532 - Aircraft ground equipment - Graphical symbols
- ISO-11995 - Aircraft - Stability requirements for loading and servicing equipment
- ISO-12056 - Aircraft - Self-propelled passenger stairs for large capacity aircraft - Functional requirements
- ISO-12604-1 - Aircraft ground handling - Checked baggage - Part 1: Mass and dimensions
- ISO-12604-3 - Aircraft ground handling - Checked baggage - Part 3: Workstation ergonomics
- ISO-14625 - Space systems - Ground support equipment for use at launch, landing or retrieval sites - General requirements
- ISO-1464 - Aerospace - Tripod jacks - Clearance dimensions
- ISO-1465 - Aircraft - Liquid oxygen replenishment couplings - Mating dimensions
- ISO-15845 - Aircraft ground equipment - Boarding vehicle for persons with reduced mobility - Functional and safety requirements
- ISO-16004 - Aircraft ground equipment - Passenger boarding bridge or transfer vehicle - Interface requirements with aircraft doors
- ISO-17775 - Aircraft - Ground-service connections - Potable water, toilet-flush water and toilet drain
- ISO-1825 - Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification
- ISO-1950 - Aircraft - Identification of servicing, maintenance, ground handling and safety/hazard points
- ISO-2026 - Aircraft - Connections for starting engines by air
- ISO-2046 - Gaseous breathing oxygen supplies for aircraft
- ISO-20683-1 - Aircraft ground equipment - Nose gear towbarless towing vehicle (TLTV) - Design, testing and maintenance requirements - Part 1: Main line aircraft
- ISO-20683-2 - Aircraft ground equipment - Design, testing and maintenance requirements for nose gear towbarless towing vehicle (TLTV) - Part 2: Regional aircraft
- ISO-21100 - Air cargo unit load devices - Performance requirements and test parameters
- ISO-21785 - Air cargo unit load devices - Load distribution model
- ISO-23748 - Aerospace series - O-ring grooves - Dimensions
- ISO-23748-AM1 - - Amendment 1
- ISO-2434 - Compressed non-breathing air for use in aircraft
- ISO-2435 - Nitrogen for use in aircraft
- ISO-27470 - Aircraft ground equipment - Upper deck catering vehicle - Functional requirements
- ISO-27471 - Aircraft ground equipment - Upper deck loader - Functional requirements
- ISO-3174 - Aircraft - Connections for checking hydraulic systems by ground appliances - Threaded type
- ISO-32312-11 - Aircraft ground support equipment - Specific requirements - Part 11: Container/Pallet dollies and loose load trailers
- ISO-4116 - Air cargo equipment - Ground equipment requirements for compatibility with aircraft unit load devices
- ISO-413 - Aircraft - Heads of lubricating nipples
- ISO-4153 - Aircraft - Pressure fuel dispensing system - Test procedure and limit value for shut-off surge pressure
- ISO-43 - Aircraft - Jacking pads
- ISO-45 - Aircraft - Pressure refuelling connections
- ISO-451 - Aircraft - Pressure re-oiling connection
- ISO-46 - Aircraft - Fuel nozzle grounding plugs and sockets
- ISO-461-1 - Aircraft - Connectors for ground electrical supplies - Part 1: Design, performance and test requirements
- ISO-461-2 - Aircraft - Connectors for ground electrical supplies - Part 2 : Dimensions
- ISO-485 - Aircraft water-methanol pressure connections
- ISO-6858 - Aircraft - Ground support electrical supplies - General requirements
- ISO-6965 - Aircraft - Self-propelled gantry for lifting air cargo containers and outsize cargoes - Functional requirements
- ISO-6966 - Aircraft - Basic requirements for aircraft loading equipment
- ISO-6966-1 - Aircraft ground equipment - Basic requirements - Part 1: General design requirements
- ISO-6966-2 - Aircraft ground equipment - Basic requirements - Part 2: Safety requirements
- ISO-6967 - Aircraft ground equipment - Main deck loader - Functional requirements
- ISO-6968 - Aircraft ground equipment - Lower deck loader - Functional requirements
- ISO-7716 - Air cargo equipment - Unit load devices transport vehicle (UTV) - Functional requirements
- ISO-7717 - Aircraft - Four-wheel-drive tow tractors - Performance requirements factors for design
- ISO-7718 - Aircraft - Main-deck passenger doors - Interface requirements for connection with passenger-boarding bridge or transfer vehicle
- ISO-7718-1 - Aircraft - Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle - Part 1: Main deck doors
- ISO-7718-2 - Aircraft - Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle - Part 2: Upper deck doors
- ISO-8267 - Aircraft - Tow bar attachment fittings for transport aircraft with a maximum ramp mass over 50 000 kg (110 100 lb) - Interface requirements
- ISO-8267-1 - Aircraft - Tow bar attachment fittings interface requirements - Part 1: Main line aircraft
- ISO-8267-2 - Aircraft - Tow bar attachment fittings interface requirements - Part 2: Regional aircraft
- ISO-8775 - Aerospace - Gaseous oxygen replenishment connection for use in fluid systems (new type) - Dimensions (Inch series)
- ISO-9666 - Aircraft - Self-propelled lavatory-servicing vehicle - Functional requirements
- ISO-9667 - Aircraft ground support equipment - Tow bars
- ISO-9678 - Aircraft - Self-propelled potable-water vehicle
- ISO-9939 - Aerospace - Pressure re-oiling connection (new type)
- ISO/DIS-11075 - Aircraft - De-Icing/Anti-Icing Fluids - ISO Type I
- ISO/DIS-11078 - Aircraft - De-Icing/Anti-Icing Fluids - ISO Types Ii, Iii and Iv
- ISO/DIS-27471 - Aircraft Ground Equipment - Upper Deck Loader - Functional Requirements
- ISO/PAS-15594 - Airport hydrogen fuelling facility operations
- ISO/PAS-21100 - Air cargo unit load devices - Performance requirements and test parameters
Other SDOs:
- DIN-EN-12312-10 - Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters; German version EN 12312-10:2005+A1:2009
- DIN-EN-12312-11 - Aircraft ground support equipment - Specific requirements - Part 11: Container/Pallet dollies and loose load trailers; German version EN 12312-11:2005
- DIN-EN-12312-14 - Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles
- DIN-EN-12312-15 - Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors; German version EN 12312-15:2006+A1:2009
- DIN-EN-12312-16 - Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment; German version EN 12312-16:2005+A1:2009
- DIN-EN-12312-17 - Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment; German version EN 12312-17:2004+A1:2009
- DIN-EN-12312-18 - Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units; German version EN 12312-18:2005+A1:2009
- DIN-EN-12312-19 - Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions; German version EN 12312-19:2005+A1:2009
- DIN-EN-12312-20 - Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units; German version EN 12312-20:2005+A1:2009
- DIN-EN-12312-3 - Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles
- DIN-EN-12312-4 - Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges
- DIN-EN-12312-5 - Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment; German version EN 12312-5:2005+A1:2009
- DIN-EN-12312-6 - Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment
- DIN-EN-12312-7 - Aircraft ground support equipment - Specific requirements - Part 7: Aircraft movement equipment; German version EN 12312-7:2005+A1:2009
- DIN-EN-12312-8 - Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms; German version EN 12312-8:2005+A1:2009
- DIN-EN-12312-9 - Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders; German and English version EN 12312-9:2013
- DIN-EN-1361 - Rubber Hoses & Hose Assemblies for Aviation Fuel Handling, Specification
- DIN-EN-1915-3 - Part 3: Vibration Measurement Methods & Reduction, Aircraft Ground Support Equipment
- DIN-EN-1915-4 - Part 4: Noise Measurement Methods & Reduction, Aircraft Ground Support Equipment - Gen
- EN-12312-1 - Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs
- EN-12312-10 - Part 10: Container/Pallet Transfer Transporters, Aircraft Ground Support Equipment - S
- EN-12312-11 - Part 11: Container/Pallet Dollies & Loose Load Trailers, Aircraft Ground Support Equip
- EN-12312-12 - Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment
- EN-12312-13 - Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment
- EN-12312-14 - Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles
- EN-12312-15 - Part 15: Baggage & Equipment Tractors, Aircraft Ground Support Equipment - Specific Re
- EN-12312-16 - Part 16: Air Start Equipment, Aircraft Ground Support Equipment - Specific Requirement
- EN-12312-17 - Part 17: Air Conditioning Equipment, Aircraft Ground Support Equipment - Specific Requ
- EN-12312-18 - Part 18: Nitrogen or Oxygen Units, Aircraft Ground Support Equipment - Specific Requir
- EN-12312-19 - Part 19: Aircraft Jacks, Axle Jacks & Hydraulic Tail Stanchions, Aircraft Ground Suppo
- EN-12312-2 - Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles
- EN-12312-20 - Part 20: Electrical Ground Power Units, Aircraft Ground Support Equipment - Specific R
- EN-12312-3 - Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles
- EN-12312-4 - Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges
- EN-12312-5 - Part 5: Aircraft Fuelling Equipment, Aircraft Ground Support Equipment - Specific Requ
- EN-12312-6 - Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment
- EN-12312-7 - Part 7: Aircraft Movement Equipment, Aircraft Ground Support Equipment - Specific Requ
- EN-12312-8 - Part 8: Maintenance Stairs & Platforms, Aircraft Ground Support Equipment - Specific R
- EN-12312-9 - Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders
- EN-1361 - Rubber Hoses & Hose Assemblies for Aviation Fuel Handling, Specification
- EN-1915-1 - Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
- EN-1915-3 - Part 3: Vibration Measurement Methods & Reduction, Aircraft Ground Support Equipment,
- EN-1915-4 - Part 4: Noise Measurement Methods & Reduction, Aircraft Ground Support Equipment, Gene
- EN-ISO-1825 - Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification
- SIS-ISO/PAS-21100 - Air cargo unit load devices - Performance requirements and test parameters (ISO/PAS 21100:2011, IDT)
- SS-EN-12312-1 - Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs
- SS-EN-12312-10 - Aircraft ground support equipment - Specific requirements - Part 10: Container/pallet transfer transporters
- SS-EN-12312-11 - Aircraft ground support equipment - Specific requirements - Part 1: Container/pallet dollies and loose load trailers
- SS-EN-12312-12 - Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment
- SS-EN-12312-13 - Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment
- SS-EN-12312-14 - Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles
- SS-EN-12312-15 - Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors
- SS-EN-12312-16 - Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment
- SS-EN-12312-17 - Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment
- SS-EN-12312-18 - Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or oxygen units
- SS-EN-12312-19 - Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions
- SS-EN-12312-2 - Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles
- SS-EN-12312-20 - Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units
- SS-EN-12312-3 - Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles
- SS-EN-12312-4 - Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges
- SS-EN-12312-5 - Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment
- SS-EN-12312-6 - Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment
- SS-EN-12312-7 - Aircraft ground support equipment - Specific requirements - Part 7: Aircraft movement equipment
- SS-EN-12312-8 - Aircraft ground support equipment - Specific requirements - Part 8: Maintenance or service stairs and platforms
- SS-EN-12312-9 - Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders
- SS-EN-1361 - Rubber hoses and hose assemblies for aviation fuel handling - Specification
- SS-EN-1915-1 - Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
- SS-EN-1915-2 - Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods
- SS-EN-1915-3 - Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction
- SS-EN-1915-4 - Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction
- SS-EN-ISO-11532 - Aircraft ground equipment - Graphical symbols (ISO 11532:2018)
- SS-EN-ISO-1825 - Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017)
- SS-ISO-10842 - Aircraft - Ground service connections - Locations and types (ISO 10842:2017, IDT)
- SS-ISO-11076 - Aircraft - Deicing/anti-icing methods on the ground (ISO 11076:2020, IDT)
- SS-ISO-11077 - Aircraft ground equipment - De-icers - Functional requirements (ISO 11077:2014, IDT)
- SS-ISO-11532 - Aircraft ground equipment - Graphical symbols (ISO 11532:2018, IDT)
- SS-ISO-12604-1 - Aircraft ground handling - Checked baggage - Part 1: Mass and dimensions (ISO 12604-1:2017, IDT)
- SS-ISO-12604-3 - Aircraft ground handling Checked baggage Part 3: Workstation ergonomics (ISO 12604-3:2022, IDT)
- SS-ISO-1464 - Aerospace - Tripod jacks - Clearance dimensions (ISO 1464:2018, IDT)
- SS-ISO-16004 - Aircraft ground equipment - Passenger boarding bridge or transfer vehicle - Interface requirements with aircraft doors (ISO 16004:2017, IDT)
- SS-ISO-1825 - Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2010, IDT)
- SS-ISO-20031 - Radiological protection - Monitoring and dosimetry for internal exposures due to wound contamination with radionuclides (ISO 20031:2020, IDT)
- SS-ISO-2026 - Aircraft - Connections for starting engines by air (ISO 2026:2020, IDT)
- SS-ISO-20683-1 - Aircraft ground equipment - Nose gear towbarless towing vehicle (TLTV) - Design, testing and maintenance requirements - Part 1: Main line aircraft (ISO 20683-1:2016, IDT)
- SS-ISO-20683-2 - Aircraft ground equipment - Design, testing and maintenance requirements for nose gear towbarless towing vehicle (TLTV) - Part 2: Regional aircraft (ISO 20683-2:2016, IDT)
- SS-ISO-21100 - Air cargo unit load devices - Performance requirements and test parameters (ISO 21100:2014, IDT)
- SS-ISO-21785 - Air cargo unit load devices - Load distribution model (ISO 21785:2020, IDT)
- SS-ISO-27471 - Aircraft ground equipment -- Upper deck loader -- Functional requirements (ISO 27471, IDT)
- SS-ISO-4153 - Aircraft - Pressure fuel dispensing system - Testprocedure and limit value for shut-off surge pressure
- SS-ISO-43 - Aircraft - Jacking pads (ISO 43:2016, IDT)
- SS-ISO-461-1 - Aircraft - Connectors for ground electrical supplies - Part 1: Design, performance and test requirements (ISO 461-1:2003, IDT)
- SS-ISO-6517 - Air cargo - Certified lower deck containers - Design and testing (ISO 6517:2013, IDT)
- SS-ISO-6858 - Aircraft - Ground support electrical supplies - General requirements
- SS-ISO-6965 - Aircraft - Self-propelled gantry for lifting air cargo containers and outsize cargoes - Functional requirements
- SS-ISO-6966-2 - Aircraft ground equipment - Basic requirements - Part 2: Safety requirements (ISO 6966-2:2014, IDT)
- SS-ISO-7718-1 - Aircraft - Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle - Part 1: Main deck doors (ISO 7718-1:2016, IDT)
- SS-ISO-7718-2 - Aircraft - Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle - Part 2: Upper deck doors (ISO 7718-2:2016, IDT)
- SS-ISO-8267-1 - Aircraft - Tow bar attachment fittings interface requirements - Part 1: Main line aircraft (ISO 8267-1:2015, IDT)
- SS-ISO-8267-2 - Aircraft - Tow bar attachment fittings interface requirements - Part 2: Regional aircraft (ISO 8267-2:2019, IDT)
- SS-ISO-8775 - Aerospace - Gaseous oxygen replenishment connection for use in fluid systems (new type) - Dimensions (Inch series)
- SS-ISO-9667 - Aircraft ground support equipment - Tow bars (ISO 9667:2017, IDT)