Document Center List of Standards on Hydraulic Fluids Fluid Power Systems, See 23.100
ICS Code 75.120
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D1401 - Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
- ASTM-D2070 - Standard Test Method for Thermal Stability of Hydraulic Oils
- ASTM-D2160 - Standard Test Method for Thermal Stability of Hydraulic Fluids (Withdrawn 1997)
- ASTM-D2271 - Standard Test Method for Preliminary Examination of Hydraulic Fluids (Wear Test) (Withdrawn 2004)
- ASTM-D2428 - Standard Test Method for Simulative Recirculating System Testing of Aerospace Hydraulic Fluids (Withdrawn 1997)
- ASTM-D2619 - Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
- ASTM-D2882 - Standard Test Method for Indicating the Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in Constant Volume Vane Pump (Withdrawn 2003)
- ASTM-D3119 - Method of Test for Mist Spray Flammability of Hydraulic Fluids (Withdrawn 1988)
- ASTM-D3700 - Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
- ASTM-D4307 - Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
- ASTM-D4862 - Test Method For Evaluating Hydraulic Transmission Fluid Antiwear Properties (Withdrawn 1995)
- ASTM-D4898 - Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
- ASTM-D4997 - Test Methods for Evaluation of Water Sensitivity of Multi-Purpose Power Transmission Fluids (Withdrawn 1995)
- ASTM-D4998 - Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
- ASTM-D5306 - Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
- ASTM-D5534 - Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
- ASTM-D5621 - Standard Test Method for Sonic Shear Stability of Hydraulic Fluids
- ASTM-D5846 - Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
- ASTM-D6006 - Standard Guide for Assessing Biodegradability of Hydraulic Fluids
- ASTM-D6046 - Standard Classification of Hydraulic Fluids for Environmental Impact
- ASTM-D6080 - Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
- ASTM-D6158 - Standard Specification for Mineral Hydraulic Oils
- ASTM-D6351 - Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
- ASTM-D6482 - Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
- ASTM-D6547 - Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple
- ASTM-D6549 - Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
- ASTM-D6666 - Standard Guide for Evaluation of Aqueous Polymer Quenchants
- ASTM-D6813 - Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015)
- ASTM-D6973 - Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
- ASTM-D7043 - Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
- ASTM-D7044 - Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids (Withdrawn 2024)
- ASTM-D7596 - Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
- ASTM-D7646 - Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
- ASTM-D7647 - Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
- ASTM-D7665 - Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids
- ASTM-D7721 - Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
- ASTM-D7752 - Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids
- ASTM-D7946 - Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products
- ASTM-D8029 - Standard Specification for Biodegradable, Low Aquatic Toxicity Hydraulic Fluids
- ASTM-D8072 - Standard Classification for Reporting Solids and Insoluble Water Contamination of Hydrocarbon-Based Petroleum Products When Analyzed by Imaging Instrumentation
- ASTM-E979 - Standard Practice for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids
- ASTM-F315 - Test Method of Identification of Solder and Solder Flux Contaminants in Aerospace Fluids (Withdrawn 1998)
BSI:
- BS-2000-313 - Methods of test for petroleum and its products
- BS-5540-6 - Evaluating particulate contamination of hydraulic fluids
- BS-AU-229 - Specification for Graphical Symbols To Designate Brake Fluid Types in Road Vehicles
- BS-EN-ISO-12922 - Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
- BS-EN-ISO-12922-TC - Tracked Changes. Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
- BS-EN-ISO-20763 - Petroleum and related products. Determination of anti-wear properties of hydraulic fluids. Vane pump method
- BS-EN-ISO-20783-1 - Petroleum and related products. Determination of emulsion stability of fire-resistant fluids
- BS-EN-ISO-20843 - Petroleum and related products. Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
- BS-EN-ISO-4263-3 - Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids using the TOST test
- BS-EN-ISO-4404-1 - Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids
- BS-EN-ISO-4404-2 - Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids
- BS-EN-ISO-6743-4 - Lubricants, industrial oils and related products (class L). Classification
- BS-EN-ISO-6743-4-TC - Tracked Changes. Lubricants, industrial oils and related products (class L). Classification
- BS-ISO-10050 - Lubricants, industrial oils and related products (class L). Family T (Turbines). Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)
- BS-ISO-11158 - Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HV and HG
- BS-ISO-11158-TC - Tracked Changes. Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HV and HG
- BS-ISO-11171 - Hydraulic fluid power. Calibration of automatic particle counters for liquids
- BS-ISO-11171-TC - Tracked Changes. Hydraulic fluid power. Calibration of automatic particle counters for liquids
- BS-ISO-11365 - Petroleum and related products. Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids
- BS-ISO-13357-2 - Petroleum products. Determination of the filterability of lubricating oils
- BS-ISO-4404 - Petroleum and related products. Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems
- BS-ISO-4404-1 - Part 1: Water-Containing Fluids
- BS-ISO-4406 - Hydraulic fluid power. Fluids. Method for coding the level of contamination by solid particles
- BS-ISO-4926 - Road vehicles. Hydraulic braking systems. Non-petroleum-based reference fluid
- BS-ISO-6073 - Petroleum products. Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
- BS-ISO-9128 - Road vehicles. Graphical symbols to designate brake fluid types
- DD-ISO-11365 - Petroleum and related products. Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids
- PD-CEN-14489 - Fire-resistant hydraulic fluids. Classification and specification. Guidelines on selection for the protection of safety, health and the environment
- PD-CEN-16227 - Liquid petroleum products. Bio-lubricants. Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants
- PD/CEN-16227 - Liquid petroleum products. Bio-lubricants. Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants
ISO:
- ISO-10050 - Lubricants, industrial oils and related products (class L) - Family T (Turbines) - Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)
- ISO-11158 - Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HH, HL, HM, HV and HG
- ISO-11365 - Petroleum and related products - Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids
- ISO-12922 - Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
- ISO-20763 - Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
- ISO-20783-1 - Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE
- ISO-20783-2 - Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB
- ISO-20843 - Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
- ISO-3871 - Road vehicles - Labelling of containers for petroleum-based or non-petroleum-based brake fluid
- ISO-4263-2 - Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 2: Procedure for category HFC hydraulic fluids
- ISO-4263-3 - Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids
- ISO-4404-1 - Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids
- ISO-4404-2 - Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids
- ISO-4406 - Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles
- ISO-4925 - Road vehicles - Specification of non-petroleum-based brake fluids for hydraulic systems
- ISO-4926 - Road vehicles - Hydraulic braking systems - Non-petroleum-based reference fluid
- ISO-6743-4 - Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems)
- ISO-7308 - Road vehicles - Petroleum-based brake-fluid for stored-energy hydraulic brakes
- ISO-7309 - Road vehicles - Hydraulic braking systems - ISO reference petroleum base fluid
- ISO-7745 - Hydraulic fluid power - Fire-resistant fluids - Requirements and guidelines for use
- ISO-9128 - Road vehicles - Graphical symbols to designate brake fluid types
Other SDOs:
- DIN-51524-1 - Pressure fluids - Hydraulic oils - Part 1: HL hydraulic oils, Minimum requirements
- DIN-51524-2 - Pressure fluids - Hydraulic oils - Part 2: HLP hydraulic oils, Minimum requirements
- DIN-51524-3 - Pressure fluids - Hydraulic oils - Part 3: HVLP hydraulic oils, Minimum requirements
- DIN-EN-ISO-12922 - Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC , HFDR and HFDU (ISO 12922:2012)
- DIN-EN-ISO-20763 - Petroleum & Related Products, Determination of Anti-Wear Properties of Hydraulic Fluid
- DIN-EN-ISO-20783-1 - Part 1: Fluids in Category Hfae, Petroleum & Related Products, Determination of Emulsi
- DIN-EN-ISO-20783-2 - Part 2: Fluids in Category Hfb, Petroleum & Related Products, Determination of Emulsio
- DIN-EN-ISO-20843 - Petroleum & Related Products - Determination of Ph of Fire-Resistant Fluids With Categ
- DIN-EN-ISO-4263-1 - Part 1: Procedure for Mineral Oils, Petroleum & Related Products, Determination of The
- DIN-EN-ISO-4263-3 - Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids
- DIN-EN-ISO-4404-1 - Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012)
- DIN-EN-ISO-4404-2 - Part 2: Non-Aqueous Fluids, Petroleum & Related Products - Determination of the Corros
- DIN-EN-ISO-6743-4 - Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems)
- EN-ISO-12922 - Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012)
- EN-ISO-20763 - Petroleum & Related Products, Determination of Anti-Wear Properties of Hydraulic Fluid
- EN-ISO-20783-1 - Part 1: Fluids in Category Hfae, Petroleum & Related Products, Determination of Emulsi
- EN-ISO-20843 - Petroleum & Related Products - Determination of Ph of Fire-Resistant Fluids With Categ
- EN-ISO-4263-3 - Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids
- EN-ISO-4404-1 - Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012)
- EN-ISO-4404-2 - Part 2: Non-Aqueous Fluids, Petroleum & Related Products - Determination of the Corros
- EN-ISO-6743-4 - Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems)
- SS-155181 - Petroleum and related products - Determination of the hydrolysis characteristics of oils and fluids - Hydrolytic stability test method
- SS-155434 - Hydraulic fluids - Technical requirements, environmental properties and test methods
- SS-155470 - Lubricants, industrial oil and related products (Class L) - Requirements for environmentally acceptable lubricating greases (family X)
- SS-EN-ISO-12922 - Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2020)
- SS-EN-ISO-20763 - Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004)
- SS-EN-ISO-20783-1 - Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2011)
- SS-EN-ISO-20783-2 - Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003)
- SS-EN-ISO-20843 - Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2011)
- SS-EN-ISO-4263-2 - Petroleum and related products - Determination of the ageing behavior of inhibited oils and fluids - TOST test - Part 2: Procedure for category HFC hydraulic fluids (ISO 4263-2:2003)
- SS-EN-ISO-4263-3 - Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO 4263-3:2015)
- SS-EN-ISO-4404-1 - Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012)
- SS-EN-ISO-4404-2 - Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010)
- SS-EN-ISO-6743-4 - Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:2015)
- SS-ISO-11171 - Hydraulic fluid power - Calibration of automatic particle counters for liquids (ISO 11171:2016, IDT)
- SS-ISO-13357-2 - Petroleum products - Determination of the filterability of lubricating oils - Part 2: Procedure for dry oils (ISO 13357-2:2017, IDT)
- SS-ISO-3871 - Road vehicles - Labelling of containers for petroleum-based or non-petroleum-based brake fluid
- SS-ISO-4406 - Hydraulic fluid power Fluids Method for coding the level of contamination by solid particles (ISO 4406:2021, IDT)
- SS-ISO-4925 - Road vehicles - Specification of non-petroleum-based brake fluids for hydraulic systems (ISO 4925:2020, IDT)
- SS-ISO-4926 - Road vehicles - Hydraulic braking systems - Non-petroleum-based reference fluid (ISO 4926:2020, IDT)
- SS-ISO-5884 - Aerospace - Fluid systems and components - Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
- SS-ISO-6073 - Petroleum products - Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
- SS-ISO-9128 - Road vehicles - Graphical symbols to designate brake fluid types (ISO 9128:2006, IDT)
- UNE-EN-ISO-4263-3 - Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids