Document Center List of Standards on Cellular Materials
ICS Code 83.100
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-C1013 - Specification for Faced Rigid Cellular Polyisocyanurate Roof Insulation (Withdrawn 1997)
- ASTM-C1029 - Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
- ASTM-C1126 - Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
- ASTM-C1303 - Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
- ASTM-C1594 - Standard Specification for Polyimide Rigid Cellular Thermal Insulation
- ASTM-C534 - Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
- ASTM-C578 - Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM-C591 - Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
- ASTM-C945 - Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
- ASTM-C950 - Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
- ASTM-D1055 - Standard Specifications for Flexible Cellular Materials-Latex Foam (Withdrawn 2014)
- ASTM-D1056 - Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
- ASTM-D1565 - Specification for Flexible Cellular Materials-Vinyl Chloride Polymers and Copolymers (Open-Cell Foam) (Withdrawn 1998)
- ASTM-D1621 - Standard Test Method for Compressive Properties of Rigid Cellular Plastics
- ASTM-D1622 - Standard Test Method for Apparent Density of Rigid Cellular Plastics
- ASTM-D1623 - Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
- ASTM-D1667 - Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell)
- ASTM-D2126 - Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
- ASTM-D2222 - Standard Test Method for Methanol Extract of Vinyl Chloride Resins
- ASTM-D2341 - Specification for Rigid Urethane Foam (Withdrawn 1988)
- ASTM-D2842 - Standard Test Method for Water Absorption of Rigid Cellular Plastics
- ASTM-D3204 - Standard Specification for Preformed Cellular Plastic Joint Fillers for Relieving Pressure (Withdrawn 2004)
- ASTM-D3453 - Standard Specification for Flexible Cellular Materials—Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
- ASTM-D3489 - Standard Test Methods for Microcellular Urethane Materials
- ASTM-D3552 - Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
- ASTM-D3553 - Standard Test Method for Fiber Content by Digestion of Reinforced Metal Matrix Composites (Withdrawn 2000)
- ASTM-D3574 - Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
- ASTM-D3575 - Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers
- ASTM-D3576 - Standard Test Method for Cell Size of Rigid Cellular Plastics
- ASTM-D3675 - Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
- ASTM-D3676 - Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
- ASTM-D3768 - Standard Test Method for Microcellular Urethanes—Flexural Recovery
- ASTM-D3769 - Standard Test Method for Microcellular Urethanes—High-Temperature Sag
- ASTM-D3770 - Specification for Flexible Cellular Materials-High-Resilience Polyurethane Foam (HR) and Combustion Modified High Resilience (CMHR) Polyurethane Foam (Withdrawn 1998)
- ASTM-D3851 - Standard Specification for Microcellular Polyurethane Shoe Soling Materials
- ASTM-D3894 - Test Method for Evaluation of Fire Response of Rigid Cellular Plastics Using a Small Corner Configuration (Withdrawn 1994)
- ASTM-D4819 - Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
- ASTM-D4986 - Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
- ASTM-D5113 - Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
- ASTM-D5132 - Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
- ASTM-D5308 - Methods of Testing Semi-Flexible Cellular Urethanes for Automotive and Similar Energy Absorption Applications (Withdrawn 1998)
- ASTM-D5672 - Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique
- ASTM-D6576 - Standard Specification for Flexible Cellular Rubber Chemically Blown
- ASTM-D6694 - Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems
- ASTM-D6705 - Standard Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems
- ASTM-D6817 - Standard Specification for Rigid Cellular Polystyrene Geofoam
- ASTM-D6979 - Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen
- ASTM-D7119 - Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing
- ASTM-D7252 - Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates
- ASTM-D7605 - Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
- ASTM-D7710 - Standard Test Method for Determination of Volume and Density of Rigid and Irregularly Shaped Molded Cellular Materials (Withdrawn 2021)
- ASTM-F1957 - Standard Test Method for Composite Foam Hardness-Durometer Hardness
BSI:
- BS-3379 - Combustion modified flexible polyurethane cellular materials for loadbearing applications. Specification
- BS-3837-2 - Expanded Polystyrene Boards, Specification for Extruded Boards
- BS-3927 - Specification for rigid phenolic foam (PF) for thermal insulation in the form of slabs and profiled sections
- BS-4370-1 - Methods of test for rigid cellular materials. Methods 1 to 5
- BS-4370-2 - Methods of test for rigid cellular materials. Methods 7 to 9
- BS-4370-3 - Methods of test for rigid cellular materials
- BS-4370-4 - Methods of test for rigid cellular materials
- BS-4443-1 - Methods 1 To 6 - Methods of Test for Flexible Cellular Materials
- BS-4443-3 - Methods of test for flexible cellular materials. Method 8. Determination of creep. Method 9. Determination of dynamic cushioning performance
- BS-4443-4 - Methods of test for flexible cellular materials. Method 10. Determination of solvent swelling
- BS-4443-5 - Methods of test for flexible cellular materials. Method 13. Test for dynamic fatigue by constant load pounding
- BS-4443-7 - Methods of test for flexible cellular materials. Method 17. Determination of tear strength of flexible cellular material with an integral skin
- BS-4840-1 - Rigid polyurethane (PUR) foam in slab form
- BS-4840-2 - Rigid polyurethane (PUR) foam in slab form
- BS-5111-1 - Laboratory methods of test for determination of smoke generation characteristics of cellular plastics and cellular rubber materials. Method for testing a 25 mm cube test specimen of low density material (up to 130 kg/m
- BS-5608 - Specification for preformed rigid polyurethane (PUR) and polyisocyanurate (PIR) foams for thermal insulation of pipework and equipment
- BS-5946 - Method of test for determination of the punking behaviour of phenol-formaldehyde foam
- BS-7523 - Specification for preformed cellular polyethylene (PE) materials for the thermal insulation of pipework
- BS-7619 - Extruded cellular unplasticized white PVC (PVCUE) profiles. Specification
- BS-EN-14933 - Thermal insulation and light weight fill products for civil engineering applications. Factory made products of expanded polystyrene (EPS). Specification
- BS-EN-14934 - Thermal insulation and light weight fill products for civil engineering applications. Factory made products of extruded polystyrene foam (XPS). Specification
- BS-EN-15702 - Cellular plastics. Cell count procedure for flexible and rigid polyurethane
- BS-EN-ISO-1798 - Flexible cellular polymeric materials. Determination of tensile strength and elongation at break
- BS-EN-ISO-1856 - Flexible cellular polymeric materials. Determination of compression set
- BS-EN-ISO-1856-TC - Tracked Changes. Flexible cellular polymeric materials. Determination of compression set
- BS-EN-ISO-2439 - Flexible cellular polymeric materials. Determination of hardness (indentation technique)
- BS-EN-ISO-2440 - Flexible and rigid cellular polymeric materials. Accelerated ageing tests
- BS-EN-ISO-3385 - Flexible cellular polymeric materials. Determination of fatigue by constant-load pounding
- BS-EN-ISO-3386-1 - Polymeric materials, cellular flexible. Determination of stress-strain characteristics in compression
- BS-EN-ISO-3386-2 - Flexible cellular polymeric materials. Determination of stress-strain characteristics in compression
- BS-EN-ISO-3582 - Flexible cellular polymeric materials. Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
- BS-EN-ISO-4590 - Rigid cellular plastics. Determination of the volume percentage of open cells and of closed cells
- BS-EN-ISO-4590-TC - Tracked Changes. Rigid cellular plastics. Determination of the volume percentage of open cells and of closed cells
- BS-EN-ISO-4651 - Cellular rubbers and plastics. Determination of dynamic cushioning performance
- BS-EN-ISO-5999 - Flexible cellular polymeric materials. Polyurethane foam for load-bearing applications excluding carpet underlay. Specification
- BS-EN-ISO-7214 - Cellular plastics. Polyethylene. Methods of test
- BS-EN-ISO-7231 - Polymeric materials, cellular, flexible. Determination of air flow value at constant pressure-drop
- BS-EN-ISO-7231-TC - Tracked Changes. Polymeric materials, cellular, flexible. Determination of air flow value at constant pressure-drop
- BS-EN-ISO-8067 - Flexible cellular polymeric materials. Determination of tear strength
- BS-EN-ISO-8067-TC - Tracked Changes. Flexible cellular polymeric materials. Determination of tear strength
- BS-EN-ISO-8307 - Flexible cellular polymeric materials. Determination of resilience by ball rebound
- BS-EN-ISO-8307-TC - Tracked Changes. Flexible cellular polymeric materials. Determination of resilience by ball rebound
- BS-EN-ISO-844 - Rigid cellular plastics. Determination of compression properties
- BS-EN-ISO-844-TC - Tracked Changes. Rigid cellular plastics. Determination of compression properties
- BS-EN-ISO-845 - Cellular plastics and rubbers. Determination of apparent density
- BS-EN-ISO-9054 - Cellular plastics, rigid. Test methods for self-skinned high-density materials
- BS-ISO-13362 - Flexible cellular polymeric materials. Determination of compression set under humid conditions
- BS-ISO-1922 - Rigid cellular plastics. Determination of shear properties
- BS-ISO-1922-TC - Tracked Changes. Rigid cellular plastics. Determination of shear properties
- BS-ISO-1926 - Rigid cellular plastics. Determination of tensile properties
- BS-ISO-21844 - Cellular plastic. Cellulose foam thermal insulation. Material specification
- BS-ISO-23641 - Flexible cellular polymeric materials. Determination of antibacterial effectiveness
- BS-ISO-4898 - Rigid cellular plastics. Thermal insulation products for buildings. Specifications
- BS-ISO-6915 - Flexible cellular polymeric materials. Polyurethane foam for laminate use. Specification
- BS-ISO-6916-1 - Flexible cellular polymeric materials. Sponge and expanded cellular rubber products. Specification
- BS-ISO-844 - Rigid Cellular Plastics, Determination of Compression Properties
- BS-ISO-9772 - Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame
ISO:
- ISO-10066 - Flexible cellular polymeric materials - Determination of creep in compression
- ISO-11752 - Flexible cellular polymeric materials -- Moulded and extruded sponge or expanded cellular rubber products -- Compressibility test on finished parts
- ISO-11752-1 - Flexible cellular polymeric materials - Moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished parts - Amendment 1
- ISO-1209-1 - Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test
- ISO-1209-2 - Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- ISO-13362 - Flexible cellular polymeric materials -- Determination of compression set under humid conditions
- ISO-1663 - Rigid cellular plastics - Determination of water vapour transmission properties
- ISO-1798 - Flexible cellular polymeric materials - Determination of tensile strength and elongation at break
- ISO-1856 - Flexible cellular polymeric materials - Determination of compression set
- ISO-1856-1 - Polymeric materials, cellular flexible - Determination of compression set - Amendment 1
- ISO-1922 - Rigid cellular plastics - Determination of shear properties
- ISO-1923 - Cellular plastics and rubbers - Determination of linear dimensions
- ISO-1926 - Rigid cellular plastics - Determination of tensile properties
- ISO-20392 - Thermal-insulating materials - Determination of compressive creep
- ISO-20393 - Thermal-insulating materials - Determination of long-term water absorption by diffusion
- ISO-20394 - Thermal-insulating materials - Determination of freeze-thaw resistance
- ISO-21844 - Cellular plastic - Cellulose foam thermal insulation - Material specification
- ISO-23641 - Flexible cellular polymeric materials - Determination of antibacterial effectiveness
- ISO-2439 - Flexible cellular polymeric materials - Determination of hardness (indentation technique)
- ISO-2440 - Flexible and rigid cellular polymeric materials - Accelerated ageing tests
- ISO-2440/A1 - Polymeric materials, cellular flexible - Accelerated ageing tests - Amendment 1
- ISO-2440-AM2 - - Amendment 2
- ISO-24999 - Flexible cellular polymeric materials - Determination of fatigue by a constant-strain procedure
- ISO-2796 - Cellular plastics, rigid - Test for dimensional stability
- ISO-2896 - Rigid cellular plastics -- Determination of water absorption
- ISO-3385 - Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding
- ISO-3386-1 - Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1 : Low-density materials
- ISO-3386-1-AM1 - Flexible cellular materials - Determination of compression stress/strain characteristic and compression stress value - Part 1: Low density materials - Amendment 1
- ISO-3386-2 - Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials
- ISO-3386-2-AM1 - Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Part 2: High density materials - Amendment 1
- ISO-3582 - Flexible cellular polymeric materials -- Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
- ISO-3582-1 - Cellular plastic and cellular rubber materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame - Amendment 1
- ISO-4590 - Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
- ISO-4638 - Polymeric materials, cellular flexible - Determination of air flow permeability
- ISO-4651 - Cellular rubbers and plastics - Determination of dynamic cushioning performance
- ISO-4651-1 - Cellular rubbers and plastics - Determination of dynamic cushioning performance - Amendment 1
- ISO-4897 - Cellular plastics - Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
- ISO-4898 - Rigid cellular plastics - Thermal insulation products for buildings - Specifications
- ISO-5999 - Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification
- ISO-6187 - Rigid cellular plastics - Determination of friability
- ISO-6453 - Polymeric materials, cellular flexible - Polyvinylchloride foam sheeting - Specification
- ISO-6915 - Flexible cellular polymeric materials - Polyurethane foam for laminate use - Specification
- ISO-6916-1 - Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Part 1: Sheeting
- ISO-6916-1-1 - Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Part 1: Sheeting - Amendment 1
- ISO-6916-2 - Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Part 2: Mouldings and extrusions
- ISO-7214 - Cellular plastics - Polyethylene - Methods of test
- ISO-7231 - Polymeric materials, cellular, flexible - Determination of air flow value at constant pressure-drop
- ISO-7616 - Cellular plastics, rigid - Determination of compressive creep under specified load and temperature conditions
- ISO-7850 - Cellular plastics, rigid - Determination of compressive creep
- ISO-8067 - Flexible cellular polymeric materials - Determination of tear strength
- ISO-8307 - Flexible cellular polymeric materials - Determination of resilience by ball rebound
- ISO-844 - Rigid cellular plastics - Determination of compression properties
- ISO-845 - Cellular plastics and rubbers - Determination of apparent density
- ISO-8873-1 - Rigid cellular plastics - Spray-applied polyurethane foam for thermal insulation - Part 1: Material specifications
- ISO-8873-2 - Rigid cellular plastics - Spray-applied polyurethane foam for thermal insulation - Part 2: Application
- ISO-8873-3 - Rigid cellular plastics - Spray-applied polyurethane foam for thermal insulation - Part 3: Test methods
- ISO-9054 - Cellular plastics, rigid - Test methods for self-skinned, high-density materials
- ISO-9772 - Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame
- ISO-9772-AM1 - Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flameAmendment 1: Specimens
- ISO-9774 - Thermal insulation for building applications - Guidelines for selecting properties
Other SDOs:
- DIN-EN-ISO-4590 - Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
- DIN-EN-ISO-5999 - Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification (ISO 5999:2013)
- DIN-ISO-11752 - Flexible Cellular Polymeric Materials, Moulded & Extruded Sponge or Expanded Cellular
- EN-14933 - Thermal Insulation & Light Weight Fill Products for Civil Engineering Applications - F
- EN-14934 - Thermal Insulation & Light Weight Fill Products for Civil Engineering Applications - F
- EN-15702 - Cellular Plastics - Cell Count Procedure for Flexible & Rigid Polyurethane
- EN-ISO-1798 - Flexible Cellular Polymeric Materials, Determination of Tensile Strength & Elongation
- EN-ISO-1856 - Flexible Cellular Polymeric Materials, Determination of Compression Set
- EN-ISO-2439 - Flexible Cellular Polymeric Materials - Determination of Hardness (Indentation Techniq
- EN-ISO-2440 - Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 2
- EN-ISO-3385 - Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding (ISO 3385:2014)
- EN-ISO-3386-2 - Part 2: High-Density Materials, Polymeric Materials, Cellular Flexible - Determination
- EN-ISO-4590 - Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
- EN-ISO-4651 - Cellular Rubbers & Plastics, Determination of Dynamic Cushioning Performance
- EN-ISO-5999 - Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification (ISO 5999:2013)
- EN-ISO-7214 - Cellular plastics - Polyethylene - Methods of test
- EN-ISO-7231 - Polymeric Materials, Cellular, Flexible - Determination of Air Flow Value at Constant
- EN-ISO-8067 - Flexible Cellular Polymeric Materials - Determination of Tear Strength
- EN-ISO-8307 - Flexible Cellular Polymeric Materials, Determination of Resilience by Ball Rebound
- EN-ISO-844 - Rigid cellular plastics - Determination of compression properties (ISO 844:2014)
- EN-ISO-845 - Cellular Plastics & Rubbers - Determination of Apparent Density
- JIS-K-6401 - Flexible cellular polymeric materials -- Polyurethane foam for load-bearing applications excluding carpet underlay -- Specification
- JIS-Z-0240 - Structural cushioning materials for packaging -- Determination of cushioning performance
- SS-169511 - Rigid cellular plastics - Test for dimensional stability
- SS-169521 - Rigid cellular plastics. Determination of tensileproperties
- SS-169524 - Cellular plastics - Compression test for rigid materials
- SS-169527 - Rigid cellular plastics. Determination of shear strength
- SS-169561 - Rigid cellular plastics - Determination of water absorption
- SS-EN-14933 - Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification
- SS-EN-14934 - Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification
- SS-EN-15702 - Cellular Plastics - Cell count procedure for flexible and rigid polyurethane
- SS-EN-ISO-10066 - Flexible cellular polymeric materials - Determination of creep in compression (ISO 10066:1991)
- SS-EN-ISO-1798 - Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008)
- SS-EN-ISO-1856-AM1 - Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2000/Amd 1:2007)
- SS-EN-ISO-1923 - Cellular plastics and rubbers - Determination of linear dimensions (ISO 1923:1981)
- SS-EN-ISO-2439 - Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008)
- SS-EN-ISO-2440 - Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:2019)
- SS-EN-ISO-2440-AM1 - Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 1 (ISO 2440:1997/Amd 1:2010)
- SS-EN-ISO-2440-AM2 - Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 2 (ISO 2440:1997/Amd 2:2014)
- SS-EN-ISO-3385 - Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding (ISO 3385:2014)
- SS-EN-ISO-3386-1 - Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Part 1: Low-density materials (ISO 3386-1:1986)
- SS-EN-ISO-3386-2 - Flexible cellular/polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997)
- SS-EN-ISO-3386-2-AM1 - Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials - Amendment 1 (ISO 3386-2:1997/Amd 1:2010)
- SS-EN-ISO-3582 - Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame (ISO 3582:2000)
- SS-EN-ISO-3582-AM1 - Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame - Amendment 1 (ISO 3582:2000/Amd 1:2007)
- SS-EN-ISO-4638 - Polymeric materials, cellular flexible - Determination of air flow permeability (ISO 4638:1984)
- SS-EN-ISO-4651 - Polymeric materials, cellular flexible - Determination of dynamic cushioning performance (ISO 4651:1988)
- SS-EN-ISO-4651-AM1 - Cellular rubbers and plastics - Determination of dynamic cushioning performance - Amendment 1 (ISO 4651:1988/Amd 1:2006)
- SS-EN-ISO-5999 - Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification (ISO 5999:2013)
- SS-EN-ISO-7214 - Cellular plastics - Polyethylene - Methods of test (ISO 7214:2012)
- SS-EN-ISO-7231 - Polymeric materials, cellular, flexible - Determination of air flow value at constant pressure-drop (ISO 7231:2023)
- SS-EN-ISO-8067 - Flexible cellular polymeric materials - Determination of tear strength (ISO 8067:2018)
- SS-EN-ISO-8307 - Flexible cellular polymeric materials - Determination of resilience by ball rebound (ISO 8307:2018)
- SS-EN-ISO-844 - Rigid cellular plastics - Determination of compression properties (ISO 844:2021)
- SS-EN-ISO-845 - Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006)
- SS-EN-ISO-9054 - Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990)
- SS-ISO-11752 - Flexible cellular polymeric materials - Moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished parts
- SS-ISO-11752-AM1 - Flexible cellular polymeric materials - Moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished parts (ISO 11752:2000/Amd 1:2006, IDT)
- SS-ISO-1209-1 - Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test (ISO 1209-1:2007, IDT)
- SS-ISO-1209-2 - Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity (ISO 1209-2:2007, IDT)
- SS-ISO-13362 - Flexible cellular polymeric materials - Determination of compression set under humid conditions
- SS-ISO-16790 - Plastics - Determination of drawing characteristics of thermoplastics in the molten state (ISO 16790:2005, IDT)
- SS-ISO-18352 - Carbon-fibre-reinforced plastics - Determination of compression-after-impact properties at a specified impactenergy level (ISO 18352:2009, IDT)
- SS-ISO-1922 - Rigid cellular plastics - Determination of shear properties (ISO 1922:2018, IDT)
- SS-ISO-1926 - Rigid cellular plastics - Determination of tensile properties (ISO 1926:2009, IDT)
- SS-ISO-20392 - Thermal-insulating materials - Determination of compressive creep (ISO 20392:2007, IDT)
- SS-ISO-23641 - Flexible cellular polymeric materials Determination of antibacterial effectiveness (ISO 23641:2021, IDT)
- SS-ISO-2439 - Rubber - Determination of frictional properties - Technical Corrigendum 1
- SS-ISO-24999 - Flexible cellular polymeric materials - Determination of fatigue by constant-strain procedure (ISO 24999:2008, IDT)
- SS-ISO-2896 - Cellular plastics rigid - Determination of water absorption (ISO 2896:2001, IDT)
- SS-ISO-4898 - Rigid cellular plastics - Thermal insulation products for buildings - Specifications (ISO 4898:2018, IDT)
- SS-ISO-6453 - Polymeric materials, cellular flexible - Polyvinylchloride foam sheeting - Specification
- SS-ISO-6915 - Flexible cellular polymeric materials - Polyurethane foam for laminate use - Specification (ISO 6915:2019, IDT)
- SS-ISO-6916-1 - Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Part 1: Sheeting
- SS-ISO-6916-1-AM1 - Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Part 1: Sheeting (ISO 6916-1:1995/Amd 1:2007, IDT)
- SS-ISO-6916-2 - Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Part 2: Mouldings and extrusions
- SS-ISO-8307 - Flexible cellular polymetric materials - Determination of resilience
- SS-ISO-844 - Rigid cellular plastics - Determination of compression properties (ISO 844:2004, IDT)
- SS-ISO-8873-2 - Rigid cellular plastics - Spray-applied polyurethane foam for thermal insulation - Part 2: Application (ISO 8873-2:2007, IDT)
- SS-ISO-8873-3 - Rigid cellular plastics - Spray-applied polyurethane foam for thermal insulation - Part 3: Test methods (ISO 8873-3:2007, IDT)
- SS-ISO-9772 - Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame (ISO 9772:2012, IDT)
- SS-ISO-9774 - Thermal insulation for building applications - Guidelines for selecting properties (ISO 9774:2004, IDT)