Document Center List of Standards on Walls. Partitions. Faã§Ades
ICS Code 91.060.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1032 - Standard Specification for Woven Wire Plaster Base
- ASTM-C1072 - Standard Test Methods for Measurement of Masonry Flexural Bond Strength
- ASTM-C1196 - Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
- ASTM-C1197 - Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
- ASTM-C1201 - Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
- ASTM-C1280 - Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing
- ASTM-C1355 - Standard Specification for Glass Fiber Reinforced Gypsum Composites
- ASTM-C1372 - Standard Specification for Dry-Cast Segmental Retaining Wall Units
- ASTM-C1381 - Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts
- ASTM-C1390 - Test Methods for Flexural Bond Strength of Masonry
- ASTM-C1395 - Specification for Gypsum Ceiling Board (Withdrawn 2005)
- ASTM-C1396 - Standard Specification for Gypsum Board
- ASTM-C1484 - Standard Specification for Vacuum Insulation Panels
- ASTM-C1496 - Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
- ASTM-C1667 - Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
- ASTM-C1670 - Standard Specification for Adhered Manufactured Stone Masonry Veneer Units
- ASTM-C1717 - Standard Test Methods for Conducting Strength Tests of Masonry Wall Panels
- ASTM-C1766 - Standard Specification for Factory-Laminated Gypsum Panel Products
- ASTM-C1776 - Standard Specification for Wet-Cast Precast Modular Retaining Wall Units
- ASTM-C1795 - Standard Test Methods for High-Temperature Characterization of Gypsum Boards and Panels
- ASTM-C473 - Standard Test Methods for Physical Testing of Gypsum Panel Products
- ASTM-C474 - Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
- ASTM-C645 - Standard Specification for Nonstructural Steel Framing Members
- ASTM-C725 - Standard Specification for Semidense Mineral Fiber Siding (Withdrawn 2019)
- ASTM-C754 - Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
- ASTM-C901 - Standard Specification for Prefabricated Masonry Panels
- ASTM-C946 - Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
- ASTM-C955 - Standard Specification for Cold-Formed Steel Structural Framing Members
- ASTM-D5206 - Standard Test Method for Windload Resistance of Rigid Plastic Siding
- ASTM-D5319 - Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
- ASTM-D6237 - Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
- ASTM-D6513 - Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests
- ASTM-D7254 - Standard Specification for Polypropylene (PP) Siding
- ASTM-D7445 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
- ASTM-D7989 - Standard Practice for Demonstrating Equivalent In-Plane Lateral Seismic Performance to Wood-Frame Shear Walls Sheathed with Wood Structural Panels
- ASTM-D7990 - Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding
- ASTM-D8109 - Standard Guide for Waterproofing Repair of Concrete by Chemical Grout Crack Injection
- ASTM-E1825 - Standard Guide for Evaluation of Building Exterior Enclosure Materials, Products, and Systems
- ASTM-E1886 - Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
- ASTM-E1925 - Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures
- ASTM-E1996 - Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
- ASTM-E2126 - Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
- ASTM-E2127 - Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
- ASTM-E2128 - Standard Guide for Evaluating Water Leakage of Building Walls
- ASTM-E2270 - Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions
- ASTM-E2273 - Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
- ASTM-E2511 - Standard Guide for Detailing of EIFS-Clad Barrier and Drainage Wall Assemblies
- ASTM-E2556 - Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
- ASTM-E2568 - Standard Specification for PB Exterior Insulation and Finish Systems
- ASTM-E2570 - Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage
- ASTM-E2707 - Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure
- ASTM-E2837 - Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies
- ASTM-E2841 - Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions
- ASTM-E2925 - Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function
- ASTM-E3036 - Standard Guide for Notating Facade Conditions in the Field
- ASTM-E3037 - Standard Test Method for Measuring Relative Movement Capabilities of Through-Penetration Firestop Systems
- ASTM-E3069 - Standard Guide for Evaluation and Rehabilitation of Mass Masonry Walls for Changes to Thermal and Moisture Properties of the Wall
- ASTM-E330 - Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
- ASTM-E331 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
- ASTM-E497 - Standard Practice for Installing Sound-Isolating Lightweight Partitions (Withdrawn 2008)
- ASTM-E518 - Standard Test Methods for Flexural Bond Strength of Masonry
- ASTM-E519 - Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
- ASTM-E547 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
- ASTM-E557 - Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions
- ASTM-E72 - Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
- ASTM-E864 - Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
- ASTM-F1861 - Standard Specification for Resilient Wall Base
- ASTM-PS27 - Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures (Withdrawn 1996)
BSI:
- BS-1243 - Specification for metal ties for cavity wall construction
- BS-1494-1 - Specification for fixing accessories for building purposes. Fixings for sheet, roof and wall coverings
- BS-1494-2 - Specification for fixing accessories for building purposes. Sundry fixings
- BS-4315-1 - Methods of test for resistance to air and water penetration
- BS-4315-2 - Methods of test for resistance to air and water penetration
- BS-4904 - Specification for external cladding colours for building purposes
- BS-493 - Specification for airbricks and gratings for wall ventilation
- BS-5234 - Code of practice. Internal non-loadbearing partitioning
- BS-5234-1 - Partitions (including matching linings)
- BS-5234-2 - Partitions (including matching linings)
- BS-5247-14 - Code of practice for sheet roof and wall coverings. Corrugated asbestos-cement
- BS-5262 - Code of practice for external renderings
- BS-5268-6.1 - Section 6.1: Dwellings Not Exceeding Seven Storeys, Part 6: Code of Practice for Timb
- BS-5268-6.2 - Code of Practice for Timber Frame Walls. Buildings Other Than Dwellings Not Exceeding
- BS-5385-2 - Wall and floor tiling
- BS-5385-3 - Wall and floor tiling
- BS-5385-4 - Wall and floor tiling
- BS-5385-5 - Wall and floor tiling
- BS-5427 - Code of practice for the use of profiled sheet for roof and wall cladding on buildings
- BS-5427-1 - Code of practice for the use of profiled sheet for roof and wall cladding on buildings. Design
- BS-5642-2 - Sills, copings and cappings
- BS-5977-2 - Lintels. Specification for prefabricated lintels
- BS-6178-1 - Joist hangers. Specification for joist hangers for building into masonry walls of domestic dwellings
- BS-6915 - Design and construction of fully supported lead sheet roof and wall coverings. Code of practice
- BS-8103-2 - Structural design of low-rise buildings
- BS-8104 - Code of practice for assessing exposure of walls to wind-driven rain
- BS-8212 - Code of practice for dry lining and partitioning using gypsum plasterboard
- BS-8219 - Installation of sheet roof and wall coverings. Profiled fibre cement. Code of practice
- BS-8297 - Design, manufacture and installation of architectural precast concrete cladding. Code of practice
- BS-8298 - Code of practice for design and installation of natural stone cladding and lining
- BS-8298-1 - Code of practice for the design and installation of natural stone cladding and lining
- BS-8298-2 - Design and installation of natural stone cladding and lining
- BS-8298-3 - Design and installation of natural stone cladding and lining
- BS-8298-4 - Design and installation of natural stone cladding and lining
- BS-EN-12152 - Curtain walling. Air permeability. Performance requirements and classification
- BS-EN-12152-TC - Tracked Changes. Curtain walling. Air permeability. Performance requirements and classification
- BS-EN-12153 - Curtain walling. Air permeability. Test method
- BS-EN-12153-TC - Tracked Changes. Curtain walling. Air permeability. Test method
- BS-EN-12154 - Curtain walling. Watertightness. Performance requirements and classification
- BS-EN-12155 - Curtain walling. Watertightness. Laboratory test under static pressure
- BS-EN-12179 - Curtain walling. Resistance to wind load. Test method
- BS-EN-13051 - Curtain walling. Watertightness. Site test
- BS-EN-13116 - Curtain walling. Resistance to wind load. Performance requirements
- BS-EN-13119 - Curtain walling. Terminology
- BS-EN-13119-TC - Tracked Changes. Curtain walling. Terminology
- BS-EN-1364-3 - Fire resistance tests for non-loadbearing elements
- BS-EN-1364-4 - Fire resistance tests for non-loadbearing elements
- BS-EN-1365-1 - Fire resistance tests for loadbearing elements
- BS-EN-13830 - Curtain walling. Product standard
- BS-EN-13947 - Thermal performance of curtain walling. Calculation of thermal transmittance
- BS-EN-14019 - Curtain Walling. Impact resistance. Performance requirements
- BS-EN-14019-TC - Tracked Changes. Curtain Walling. Impact resistance. Performance requirements
- BS-EN-14024 - Metal profiles with thermal barrier. Mechanical performance. Requirements, proof and tests for assessment
- BS-EN-14024-TC - Tracked Changes. Metal profiles with thermal barrier. Mechanical performance. Requirements, proof and tests for assessment
- BS-EN-14782 - Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements
- BS-EN-14783 - Fully supported metal sheet and strip for roofing, external cladding and internal lining. Product specification and requirements
- BS-EN-15254-5 - Extended application of results from fire resistance tests. Non-loadbearing walls
- BS-EN-15254-6 - Extended application of results from fire resistance tests. Non-loadbearing walls
- BS-EN-16703 - Acoustics. Test code for drywall systems of plasterboard with steel studs. Airborne sound insulation
- BS-EN-16758 - Curtain walling. Determination of the strength of shear connections. Test method and requirements
- BS-EN-16758-TC - Tracked Changes. Curtain walling. Determination of the strength of shear connections. Test method and requirements
- BS-EN-17146 - Determination of the strength of infill supports. Test method and requirements
- BS-EN-594 - Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels
- BS-EN-845-1 - Specification for ancillary components for masonry
- BS-EN-845-2 - Specification for ancillary components for masonry
- BS-EN-845-3 - Specification for ancillary components for masonry
- BS-EN-846-10 - Methods of test for ancillary components for masonry
- BS-EN-846-11 - Methods of test for ancillary components for masonry
- BS-EN-846-9 - Methods of test for ancillary components for masonry
- BS-EN-846-9-TC - Tracked Changes. Methods of test for ancillary components for masonry
- BS-EN-ISO-12631 - Thermal performance of curtain walling. Calculation of thermal transmittance
- BS-EN-ISO-12631-TC - Tracked Changes. Thermal performance of curtain walling. Calculation of thermal transmittance
- BS-EN-ISO-16283-3 - Acoustics. Field measurement of sound insulation in buildings and of building elements
- BS-ISO-16316 - Windows, doors and curtain walling. Impacted by windborne debris in windstorms. Test method and classification
- BS-ISO-24084 - Curtain walling. Inter-storey displacement resistance. Test method
- CP-143-1 - Code of practice for sheet roof and wall coverings. Aluminium, corrugated and troughed
- CP-143-12 - Code of practice for sheet roof and wall coverings
- CP-143-15 - Code of practice for sheet roof and wall coverings
- CP-143-5 - Code of practice for sheet roof and wall coverings
- CP-297 - Precast concrete cladding (non-loadbearing)
- DD-140-1 - Wall ties. Methods of test for mortar joint and timber frame connections
- DD-140-2 - Wall ties. Recommendations for design of wall ties
- DD-ENV-13050 - Curtain walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
- PAS-9980 - Fire risk appraisal of external wall construction and cladding of existing blocks of flats. Code of practice
ISO:
- ISO-13785-1 - Reaction-to-fire tests for facades - Part 1: Intermediate-scale test
- ISO-13785-2 - Reaction-to-fire tests for facades - Part 2: Large-scale test
- ISO-140-5 - Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 5: Field measurements of airborne sound insulation of faáade elements and faáades
- ISO-16283-3 - Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 3: Façade sound insulation
- ISO-16316 - Windows, doors and curtain walling - Impacted by windborne debris in windstorms - Test method and classification
- ISO-22497 - Doors, windows and curtain walling - Curtain walling - Vocabulary
- ISO-24084 - Curtain walling - Inter-storey displacement resistance - Test method
- ISO-6512 - Building construction -- Modular coordination -- Storey heights and room heights
- ISO-7361 - Performance standards in building -- Presentation of performance levels of facades made of same-source components
- ISO-7892 - Vertical building elements -- Impact resistance tests -- Impact bodies and general test procedures
Other SDOs:
- BS-EN-13116-TC - Tracked Changes. Curtain walling. Resistance to wind load. Performance requirements
- DIN-EN-1364-4 - Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration; German version EN 1364-4:2014
- DIN-EN-13830 - Curtain walling - Product standard; German version EN 13830:2015
- DIN-EN-13947 - Thermal performance of curtain walling - Calculation of thermal transmittance; German version EN 13947:2006
- DIN-EN-14019 - Curtain Walling - Impact resistance - Performance requirements; German version EN 14019:2016
- DIN-EN-14024 - Metal Profiles With Thermal Barrier, Mechanical Performance - Requirements, Proof & T
- DIN-EN-14782 - Self-Supporting Metal Sheet for Roofing, External Cladding & Internal Lining - Product
- DIN-EN-14783 - Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements; German version EN 14783:2013
- DIN-EN-845-1 - Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
- DIN-EN-845-3 - Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
- EN-12152 - Curtain Walling, Air Permeability, Performance Requirements & Classification
- EN-13119 - Curtain walling - Terminology
- EN-1364-1 - Fire resistance tests for non-loadbearing elements - Part 1: Walls
- EN-1364-3 - Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly)
- EN-1364-4 - Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
- EN-1365-1 - Fire resistance tests for loadbearing elements - Part 1: Walls
- EN-13830 - Curtain walling - Product standard
- EN-13947 - Thermal Performance of Curtain Walling - Calculation of Thermal Transmittance
- EN-14019 - Curtain Walling - Impact resistance - Performance requirements
- EN-14024 - Metal Profiles With Thermal Barrier, Mechanical Performance - Requirements, Proof & T
- EN-14782 - Self-Supporting Metal Sheet for Roofing, External Cladding & Internal Lining - Product
- EN-14783 - Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
- EN-15080-12 - Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
- EN-15254-6 - Extended application of results from fire resistance tests - Non-load bearing walls - Part 6: Curtain walling
- EN-16240 - Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
- EN-16703 - Acoustics - Test code for drywall systems of plasterboard with steel studs - Airborne sound insulation
- EN-16758 - Curtain walling - Determination of the strength of sheared connections - Test method and requirements
- EN-594 - Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
- EN-846-9 - Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
- EN-ISO-12631 - Thermal performance of curtain walling - Calculation of thermal transmittance
- EN-ISO-16283-3 - Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 3: Fa+ºade sound insulation
- JIS-A-5422 - Fiber reinforced cement sidings
- JIS-A-5422-AM1 - Fiber reinforced cement sidings (Amendment 1)
- SS-EN-12114 - Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method
- SS-EN-12152 - Curtain walling - Air permeability - Performance requirements and classification
- SS-EN-12153 - Curtain walling - Air permeability - Test method
- SS-EN-12154 - Curtain walling - Watertightness - Performance requirements and classification
- SS-EN-12155 - Curtain walling - Watertightness - Laboratory test under static pressure
- SS-EN-12179 - Curtain walling - Resistance to wind load - Test method
- SS-EN-12326-2 - Slate and stone for discontinuous roofing and external cladding - Part 2: Methods of test for slate and carbonate slate
- SS-EN-13050 - Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
- SS-EN-13051 - Curtain walling - Watertightness - Site test
- SS-EN-13116 - Curtain walling - Resistance to wind load - Performance requirements
- SS-EN-13119 - Curtain walling - Terminology
- SS-EN-1364-1 - Fire resistance tests for non-loadbearing elements - Part 1: Walls
- SS-EN-1364-3 - Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly)
- SS-EN-1364-4 - Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
- SS-EN-1364-5 - Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles
- SS-EN-1365-1 - Fire resistance tests for loadbearing elements - Part 1: Walls
- SS-EN-13830 - Curtain Walling - Product Standard
- SS-EN-13915 - Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
- SS-EN-13947 - Thermal performance of curtain walling - Calculation of thermal transmittance
- SS-EN-14019 - Curtain Walling - Impact resistance - Performance requirements
- SS-EN-14024 - Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
- SS-EN-14274 - Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS)
- SS-EN-14782 - Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
- SS-EN-14783 - Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
- SS-EN-14992 - Precast concrete products - Wall elements
- SS-EN-15026 - Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation
- SS-EN-15080-12 - Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
- SS-EN-15254-3 - Extended application of results from fire resistance tests - Non-loadbearing walls - Part 3: Lightweight partitions
- SS-EN-15254-4 - Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions
- SS-EN-15254-5 - Extended application of results from fire resistance tests - Non-loadbearing walls - Part 5: Metal sandwich panel construction
- SS-EN-15254-6 - Extended application of results from fire resistance tests - Non-loadbearing walls - Part 6: Curtain walling
- SS-EN-16240 - Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
- SS-EN-16703 - Acoustics - Test code for drywall systems of plasterboard with steel studs - Airborne sound insulation
- SS-EN-16758 - Curtain walling - Determination of the strength of shear connections - Test method and requirements
- SS-EN-16759 - Bonded Glazing for doors, windows and curtain walling - Verification of mechanical performance of bonding on aluminium and steel surfaces
- SS-EN-17146 - Determination of the strength of infill supports - Test method and requirements
- SS-EN-1934 - Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry
- SS-EN-594 - Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
- SS-EN-845-1 - Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
- SS-EN-845-2 - Specification for ancillary components for masonry - Part 2: Lintels
- SS-EN-845-3 - Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
- SS-EN-846-10 - Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets
- SS-EN-846-11 - Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels
- SS-EN-846-2 - Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints
- SS-EN-846-3 - Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement
- SS-EN-846-5 - Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
- SS-EN-846-6 - Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
- SS-EN-846-7 - Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
- SS-EN-846-8 - Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers
- SS-EN-846-9 - Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
- SS-EN-ISO-12631 - Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2017)
- SS-EN-ISO-16283-3 - Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 3: Façade sound insulation (ISO 16283-3:2016)
- SS-ISO-22932-1 - Mining - Vocabulary - Part 1: Planning and surveying (ISO 22932-1:2020, IDT)
- UNE-EN-1365-1 - Fire resistance tests for loadbearing elements - Part 1: Walls
- UNE-EN-ISO-16283-1 - Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation