Document Center List of Standards on Metal Structures
ICS Code 91.080.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1043 - Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
- ASTM-A944 - Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
- ASTM-A981 - Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
- ASTM-A992 - Standard Specification for Structural Steel Shapes
- ASTM-D7893 - Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products
- ASTM-E1681 - Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
BSI:
- BS-3678 - Specification for access hooks for chimneys and other high structures in steel
- BS-449-2 - Specification for the use of structural steel in building. Metric units
- BS-4604-1 - General Grade, Specification for the Use of High Strength Friction Grip Bolts in Struc
- BS-4604-2 - Specification for the Use of High Strength Friction Grip Bolts in Structural Steelwork
- BS-5493 - Code of practice for protective coating of iron and steel structures against corrosion
- BS-5950-1 - Structural use of steelwork in building. Code of practice for design. Rolled and welded sections
- BS-5950-2 - Part 2: Specification for Materials, Fabrication & Erection: Hot Rolled Sections, Stru
- BS-5950-3.1 - Code of Practice for Design of Simple and Continuous Composite Beams
- BS-5950-4 - Code of Practice for Design of Composite Slabs With Profiled Steel Sheeting
- BS-5950-5 - Part 5: Code of Practice for Design of Cold Formed Thin Gauge Sections, Structural Use Of
- BS-5950-6 - Part 6: Code of Practice for Design of Light Gauge Profiledsteel Sheeting, Structural Us
- BS-5950-8 - Structural Use of Steelwork in Building, Code of Practice for Fire Resistant Design
- BS-7361-1 - Cathodic protection. Code of practice for land and marine applications
- BS-7608 - Guide to fatigue design and assessment of steel products
- BS-7905-2 - Lifting equipment for performance, broadcast and similar applications
- BS-7906-2 - Lifting equipment for performance, broadcast and similar applications
- BS-8100-1 - Code of Practice for Loading
- BS-8100-3 - Lattice Towers & Masts. Code of Practice for Strength Assessment of Members of Lattice
- BS-8100-4 - Lattice Towers & Masts, Code of Practice for Loading of Guyed Masts
- BS-8118-1 - Code of Practice for Design
- BS-8118-2 - Structural use of aluminiumSpecification for materials, workmanship and protection
- BS-EN-1090-1 - Execution of steel structures and aluminium structures
- BS-EN-1090-2 - Execution of steel structures and aluminium structures
- BS-EN-1090-3 - Execution of steel structures and aluminium structures
- BS-EN-13381-9 - Test methods for determining the contribution to the fire resistance of structural members
- BS-EN-1991-1-7(NA) - National Annex to Eurocode 1. Actions on structures
- BS-EN-1993-1-1 - Eurocode 3. Design of steel structures
- BS-EN-1993-1-10 - Eurocode 3. Design of steel structures
- BS-EN-1993-1-10(NA) - National Annex (informative) to Eurocode 3. Design of steel structures
- BS-EN-1993-1-11 - Eurocode 3. Design of steel structures
- BS-EN-1993-1-11(NA) - UK National Annex to Eurocode 3. Design of steel structures
- BS-EN-1993-1-12 - Eurocode 3. Design of steel structures
- BS-EN-1993-1-12(NA) - UK National Annex to Eurocode 3. Design of steel structures
- BS-EN-1993-1-1(NA) - UK National Annex to Eurocode 3. Design of steel structures
- BS-EN-1993-1-2 - Eurocode 3. Design of steel structures
- BS-EN-1993-1-2(NA) - UK National Annex to Eurocode 3. Design of steel structures
- BS-EN-1993-1-3 - Eurocode 3. Design of steel structures
- BS-EN-1993-1-3(NA) - UK National Annex to Eurocode 3. Design of steel structures
- BS-EN-1993-1-4 - Eurocode 3. Design of steel structures
- BS-EN-1993-1-4(NA) - UK National Annex to Eurocode 3: Design of steel structures, General rules, supplementary rules for stainless steels
- BS-EN-1993-1-5 - Eurocode 3. Design of steel structures
- BS-EN-1993-1-5(NA) - UK National Annex to Eurocode 3. Design of steel structures
- BS-EN-1993-1-6 - Eurocode 3. Design of steel structures
- BS-EN-1993-1-7 - Eurocode 3. Design of steel structures
- BS-EN-1993-1-8(NA) - UK National Annex to Eurocode 3. Design of steel structures
- BS-EN-1993-2 - Eurocode 3. Design of steel structures
- BS-EN-1993-2(NA) - UK National Annex to Eurocode 3. Design of structures
- BS-EN-1993-3-1 - Eurocode 3. Design of steel structures
- BS-EN-1993-3-1(NA) - UK National Annex to Eurocode 3. Design of steel structures
- BS-EN-1993-3-2 - Eurocode 3. Design of steel structures. Towers, masts and chimneys
- BS-EN-1993-4-1 - Eurocode 3. Design of steel structures
- BS-EN-1993-4-2 - Eurocode 3. Design of steel structures
- BS-EN-1993-4-3 - Eurocode 3. Design of steel structures
- BS-EN-1993-5 - Eurocode 3. Design of steel structures
- BS-EN-1993-5(NA) - UK National Annex to Eurocode 3: Design of steel structures
- BS-EN-1993-6 - Eurocode 3. Design of steel structures
- BS-EN-1993-6(NA) - UK National Annex to Eurocode 3. Design of steel structures
- BS-EN-1994-1-1 - Eurocode 4. Design of composite steel and concrete structures
- BS-EN-1994-1-1(NA) - UK National Annex to Eurocode 4. Design of composite steel and concrete structures
- BS-EN-1994-1-2 - Eurocode 4. Design of composite steel and concrete structures
- BS-EN-1994-1-2(NA) - UK National Annex to Eurocode 4. Design of composite steel and concrete structures
- BS-EN-1994-2 - Eurocode 4. Design of composite steel and concrete structures
- BS-EN-1999-1-1 - Eurocode 9: Design of aluminium structures
- BS-EN-1999-1-1(NA) - UK National Annex to Eurocode 9. Design of aluminium structures
- BS-EN-1999-1-2 - Eurocode 9. Design of aluminium structures
- BS-EN-1999-1-2(NA) - UK National Annex to Eurocode 9. Design of aluminium structures
- BS-EN-1999-1-3 - Eurocode 9. Design of aluminium structures
- BS-EN-1999-1-3(NA) - UK National Annex to Eurocode 9. Design of aluminium structures
- BS-EN-1999-1-4 - Eurocode 9. Design of aluminium structures
- BS-EN-1999-1-4(NA) - UK National Annex to Eurocode 9. Design of aluminium structures
- BS-EN-1999-1-5 - Eurocode 9. Design of aluminium structures
- BS-EN-1999-1-5(NA) - UK National Annex to Eurocode 9. Design of aluminium structures
- BS-EN-ISO-12944-1 - Paints and varnishes. Corrosion protection of steel structures by protective paint systems
- BS-EN-ISO-12944-1-TC - Tracked Changes. Paints and varnishes. Corrosion protection of steel structures by protective paint systems
- BS-EN-ISO-12944-5 - Paints and varnishes. Corrosion protection of steel structures by protective paint systems
- BS-EN-ISO-12944-6-TC - Tracked Changes. Paints and varnishes. Corrosion protection of steel structures by protective paint systems
- BS-EN-ISO-12944-8-TC - Tracked Changes. Paints and varnishes. Corrosion protection of steel structures by protective paint systems
- BS-EN-ISO-14713-1 - Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures
- BS-EN-ISO-14713-2 - Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures
- BS-EN-ISO-14713-3 - Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures
- DD-ENV-1090-3 - Part 3: Supplementary Rules for High Yield Strength Steels
- DD-ENV-1090-4 - Execution of Steel Structures, Supplementary Rules for Hollow Section Structures
- DD-ENV-1090-6 - Execution of Steel Structures, Supplementary Rules for Stainless Steel
- DD-ENV-12837 - Paints and varnishes. Qualification of inspectors for corrosion protection of steel structures by protective paint systems
- DD-ENV-1993-1-1 - Eurocode 3. Design of steel structures
- DD-ENV-1993-1-2 - Eurocode 3, Design of Steel Structures, General Rules, Structural Fire Design (Togethe
- DD-ENV-1993-1-3 - General Rules. Supplementary Rules for Cold Formed Thin Gauge Members & Sheeting (Toge
- DD-ENV-1999-1-1 - Part 1-1: General Rules - General Rules & Rules for Buildingg
- DD-ENV-1999-1-2 - Part 1-2: General Rules - Structural Fire Design
- DD-ENV-1999-2 - Part 2: Structures Susceptible To Fatigue, Eurocode 9: Design of Aluminium Structures
- EP-915 - The SCI Guide to the Amendments to BS 5950-1:2000
- KIT-208 - Design on Composite Steel & Concrete Structures
- KIT-213 - Design of Aluminium Structures
- PD-6696-2 - Background paper to BS EN 1994-2 and the UK National Annex to BS EN 1994-2
- PD-6702-1 - Structural use of aluminium
- PD-6702-1-TC - Structural use of aluminium
- PD-6705-2 - Structural use of steel and aluminium
- PD-6705-3 - Structural use of steel and aluminium
ISO:
- ISO-10721-1 - Steel structures -- Part 1: Materials and design
- ISO-10721-2 - Steel structures -- Part 2: Fabrication and erection
Other SDOs:
- DIN-18203-2 - Part 2: Prefabricated Steel Components, Tolerances for Building
- DIN-EN-1993-1-1 - Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
- DIN-EN-1993-1-10 - Part 1-10: Material Toughness & Through-Thickness Properties, Eurocode 3: Design of St
- DIN-EN-1993-1-11 - Part 1-11: Design of Structures With Tension Components, Eurocode 3: Design of Steel S
- DIN-EN-1993-1-2 - Part 1-2: General Rules - Structural Fire Design, Eurocode 3: Design of Steel Structur
- DIN-EN-1993-1-3 - Part 1-3: General Rules - Supplementary Rules for Cold-Formed Members & Sheeting, Euro
- DIN-EN-1993-1-4 - Eurocode 3: Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels; German version EN 1993-1-4:2006 + A1:2015
- DIN-EN-1993-1-5 - Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements; German version EN 1993-1-5:2006 + AC:2009 + A1:2017
- DIN-EN-1993-1-7 - Eurocode 3: Design of steel structures - Part 1-7: Plated structures subject to out of plane loading; German version EN 1993-1-7:2007 + AC:2009
- DIN-EN-1993-1-8 - Part 1-8: Design of Joints, Eurocode 3: Design of Steel Structures
- DIN-EN-1993-1-9 - Part 1-9: Fatigue; Eurocode 3: Design of Steel Structures
- DIN-EN-1993-2 - Part 2: Steel Bridges, Eurocode 3: Design of Steel Structures
- DIN-EN-1993-3-2 - Part 3-2: Towers, Masts & Chimneys - Chimneys, Eurocode 3: Design of Steel Structures
- DIN-EN-1994-1-1 - Part 1-1: General Rules & Rules for Buildings, Eurocode 4: Design of Composite Steel &
- DIN-EN-1994-1-2 - Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design; German version EN 1994-1-2:2005 + AC:2008
- DIN-EN-1994-2 - Part 2: General Rules & Rules for Bridges, Eurocode 4: Design of Composite Steel & Con
- DIN-EN-1999-1-2 - Part 1-2: Structural Fire Design, Eurocode 9: Design of Aluminium Structures
- EN-1090-1 - Part 1: Requirements for Conformity Assessment of Structural Components, Execution Of
- EN-1090-2 - Part 2: Technical Requirements for Steel Structures, Execution of Steel Structures & A
- EN-1090-3 - Part 3: Technical Requirements for Aluminium Structures, Execution of Steel Structures
- EN-13381-4 - Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members
- EN-13381-9 - Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings
- EN-1991-1-7(NA) - National Annex To Eurocode 1. Actions on Structures, Accidental Actions
- EN-1993-1-1 - Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
- EN-1993-1-10 - Part 1-10: Material Toughness & Through-Thickness Properties, Eurocode 3: Design of St
- EN-1993-1-10(NA) - National Annex (Informative) To Eurocode 3, Design of Steel Structures, Material Toug
- EN-1993-1-11 - Part 1-11: Design of Structures With Tension Components, Eurocode 3: Design of Steel S
- EN-1993-1-11(NA) - Uk National Annex To Eurocode 3, Design of Steel Structures, Design of Structures With
- EN-1993-1-12 - Part 1-12: Additional Rules for the Extension of En-1993 Up To Steel Grades S700; Eur
- EN-1993-1-12(NA) - Uk National Annex To Eurocode 3, Design of Steel Structures, Additional Rules for The
- EN-1993-1-2 - Part 1-2: General Rules - Structural Fire Design, Eurocode 3: Design of Steel Structur
- EN-1993-1-2(NA) - Uk National Annex To Eurocode 3, Design of Steel Structures, General Rules, Structural
- EN-1993-1-3(NA) - Uk National Annex To Eurocode 3, Design of Steel Structures, General Rules, Supplement
- EN-1993-1-4 - Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
- EN-1993-1-4(NA) - Uk National Annex To Eurocode 3, Design of Steel Structures, General Rules, Supplement
- EN-1993-1-5 - Part 1-5: Plated Structural Elements, Eurocode 3: Design of Steel Structures
- EN-1993-1-5(NA) - Uk National Annex To Eurocode 3, Design of Steel Structures, Plated Structural Element
- EN-1993-1-6 - Part 1-6: Strength & Stability of Shell Structures; Eurocode 3: Design of Steel Struct
- EN-1993-1-7 - Part 1-7: Plated Structures Subject To Out of Plane Loading; Eurocode 3: Design of Ste
- EN-1993-1-8 - Part 1-8: Design of Joints, Eurocode 3: Design of Steel Structures
- EN-1993-1-8(NA) - Uk National Annex To Eurocode 3, Design of Steel Structures, Design of Joints
- EN-1993-1-9 - Part 1-9: Fatigue; Eurocode 3: Design of Steel Structures
- EN-1993-2 - Part 2: Steel Bridges, Eurocode 3: Design of Steel Structures
- EN-1993-2(NA) - Uk National Annex To Eurocode 3, Design of Structures, Steel Bridges
- EN-1993-3-1 - Part 3-1: Towers, Masts & Chimneys - Towers & Masts, Eurocode 3: Design of Steel Struc
- EN-1993-3-1(NA) - Uk National Annex To Eurocode 3, Design of Steel Structures, Towers, Masts & Chimneys,
- EN-1993-3-2 - Part 3-2: Towers, Masts & Chimneys - Chimneys, Eurocode 3: Design of Steel Structures
- EN-1993-4-1 - Eurocode 3 - Design of steel structures - Part 4-1: Silos
- EN-1993-4-2 - Eurocode 3 - Design of steel structures - Part 4-2: Tanks
- EN-1993-4-3 - Eurocode 3 - Design of steel structures - Part 4-3: Pipeline
- EN-1993-5 - Part 5: Piling, Eurocode 3: Design of Steel Structures
- EN-1993-5(NA) - Uk National Annex To Eurocode 3, Design of Steel Structures, Piling
- EN-1993-6 - Part 6: Crane Supporting Structures, Eurocode 3: Design of Steel Structures
- EN-1993-6(NA) - Uk National Annex To Eurocode 3, Design of Steel Structures, Crane Supporting Structur
- EN-1994-1-1 - Part 1-1: General Rules & Rules for Buildings, Eurocode 4: Design of Composite Steel &
- EN-1994-1-1(NA) - Uk National Annex To Eurocode 4, Design of Composite Steel & Concrete Structures, Gene
- EN-1994-1-2 - Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
- EN-1994-1-2(NA) - Uk National Annex To Eurocode 4, Design of Composite Steel & Concrete Structures, Gene
- EN-1994-2 - Part 2: General Rules & Rules for Bridges, Eurocode 4: Design of Composite Steel & Con
- EN-1999-1-1 - Part 1-1: General Structural Rules, Eurocode 9: Design of Aluminium Structures
- EN-1999-1-1(NA) - Uk National Annex To Eurocode 9, Design of Aluminium Structures, General Structural Ru
- EN-1999-1-2 - Part 1-2: Structural Fire Design, Eurocode 9: Design of Aluminium Structures
- EN-1999-1-2(NA) - Uk National Annex To Eurocode 9, Design of Aluminium Structures, Structural Fire Desig
- EN-1999-1-3 - Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
- EN-1999-1-3(NA) - Uk National Annex To Eurocode 9, Design of Aluminium Structures, Structures Susceptibl
- EN-1999-1-4-A1 - Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
- EN-1999-1-4(NA) - National Annex - Nationally Determined Parameters - Eurocode 9: Design of Aluminium St
- EN-1999-1-5 - Part 1-5: Shell Structures, Eurocode 9 - Design of Aluminium Structures
- EN-1999-1-5(NA) - National Annex - Nationally Determined Parameters - Eurocode 9: Design of Aluminium St
- EN-ISO-12944-1 - Paints & Varnishes, Corrosion Protection of Steel Structures by Protective Paint Syste
- EN-ISO-12944-5 - Paints & Varnishes, Corrosion Protection of Steel Structures by Protective Paint Syste
- EN-ISO-14713-1 - Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance
- EN-ISO-14713-2 - Part 2: Hot Dip Galvanizing, Zinc Coatings - Guidelines and Recommendations for the Prot
- EN-ISO-14713-3 - Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing
- JIS-A-5540 - Turnbuckle for building
- JIS-A-5541 - Body of turnbuckle for building
- JIS-A-5542 - Bolts of Turnbuckle for Building
- NZS-3404.1 LL/BINDER - Steel Structures Standard - Materials, Fabrication, & Construction (Looseleaf/Binder)
- SIS-CEN/TR-17052 - Guidelines on implementing EN 1090-1:2009+A1:2011, Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
- SS-EN-10210-1 - Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
- SS-EN-10210-2 - Hot finished steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
- SS-EN-10219-1 - Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
- SS-EN-10219-2 - Cold formed welded steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
- SS-EN-1090-1 - Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
- SS-EN-1090-2 - Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
- SS-EN-1090-3 - Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
- SS-EN-12945 - Liming materials - Determination of neutralizing value - Titrimetric methods
- SS-EN-13381-4 - Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members
- SS-EN-13381-9 - Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings
- SS-EN-13445 - Unfired pressure vessels
- SS-EN-13480 - Metallic industrial piping
- SS-EN-15048-1 - Non-preloaded structural bolting assemblies - Part 1: General requirements
- SS-EN-1829-2 - High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors
- SS-EN-1992-1-2 - Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design
- SS-EN-1993-1-1 - Eurocode 3 - Design of steel structures - Part 1-1: General rules and rules for buildings
- SS-EN-1993-1-10 - Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
- SS-EN-1993-1-11 - Eurocode 3: Design of steel structures - Part 1-11: Design of structures with tension components
- SS-EN-1993-1-12 - Eurocode 3: Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700
- SS-EN-1993-1-2 - Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
- SS-EN-1993-1-3 - Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
- SS-EN-1993-1-4 - Eurocode 3: Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
- SS-EN-1993-1-4-AM2 - Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
- SS-EN-1993-1-5 - Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
- SS-EN-1993-1-6 - Eurocode 3: Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
- SS-EN-1993-1-7 - Eurocode 3: Design of steel structures - Part 1-7: Plated structures subject to out of plane loading
- SS-EN-1993-1-8 - Eurocode 3: Design of steel structures - Part 1-8: Design of joints
- SS-EN-1993-1-9 - Eurocode 3: Design of steel structures - Part 1-9: Fatigue
- SS-EN-1993-2 - Eurocode 3: Design of steel structures - Part 2: Steel bridges
- SS-EN-1993-3-1 - Eurocode 3 - Design of steel structures - Part 3-1: Towers and masts and chimneys - Towers and masts
- SS-EN-1993-3-2 - Eurocode 3: Design of steel structures - Part 3-2 : Towers, masts and chimneys - Chimneys
- SS-EN-1993-4-1 - Eurocode 3: Design of steel structures - Part 4-1: Silos
- SS-EN-1993-4-2 - Eurocode 3: Design of steel structures - Part 4-2: Tanks
- SS-EN-1993-4-3 - Eurocode 3 - Design of steel structures - Part 4-3: Pipelines
- SS-EN-1993-5 - Eurocode 3: Design of steel structures - Part 5: Piling
- SS-EN-1993-6 - Eurocode 3: Design of steel structures - Part 6 : Crane supporting structures
- SS-EN-1994-1-1 - Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
- SS-EN-1994-1-2 - Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
- SS-EN-1994-2 - Eurocode 4 - Design of composite steel and concrete structures - Part 2: General rules and rules for bridges
- SS-EN-1999-1-1 - Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
- SS-EN-1999-1-2 - Eurocode 9: Design of aluminium structures - Part 1-2: Structural fire design
- SS-EN-1999-1-3 - Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
- SS-EN-1999-1-4 - Eurocode 9 - Design of aluminium structures - Part 1-4: Cold formed structural sheeting
- SS-EN-1999-1-4-AM1 - Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
- SS-EN-1999-1-5 - Eurocode 9: Design of aluminium structures - Part 1-5: Shell structures
- SS-EN-ISO-11961 - Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2018)
- SS-EN-ISO-14713-1 - Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)
- SS-EN-ISO-14713-2 - Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2019)
- SS-EN-ISO-14713-3 - Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing (ISO 14713-3:2017)
- SS-EN-ISO-8503-1 - Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012)
- SS-EN-ISO-8503-2 - Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012)
- SS-EN-ISO-8503-3 - Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure (ISO 8503-3:2012)
- SS-EN-ISO-8503-4 - Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012)
- SS-ENV-1090-1 - Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
- SS-ENV-1090-2 - Execution of steel structures - Part 2: Supplementary rules for cold formed thin gauge components and sheeting
- SS-ENV-1090-3 - Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
- SS-ENV-12837 - Paints and varnishes - Qualification of inspectors for corrosion protection of steel structures by protective paint systems
- SS-ENV-1993-1-1 - Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
- SS-ENV-1993-1-2 - Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
- SS-ENV-1993-1-4 - Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
- SS-ENV-1993-1-5 - Eurocode 3: Design of steel structures - Part 1-5: General rules - Supplementary rules for planar plated structures without transverse loading
- SS-ENV-1993-1-7 - Eurocode 3: Design of steel structures - Part 1-7: General rules - Supplementary rules for planar plated structural elements with out of plane loading
- SS-ENV-1993-2 - Eurocode 3: Design of steel structures - Part 2: Steel bridges
- SS-ENV-1993-3-1 - Eurocode 3 - Design of steel structures - Part 3-1: Towers and masts and chimneys - Towers and masts
- SS-ENV-1993-3-2 - Eurocode 3: Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys
- SS-ENV-1993-4-3 - Eurocode 3: Design of steel structures - Part 4-3: Silor, tanks and pipelines - Pipelines
- SS-ENV-1993-5 - Eurocode 3: Design of steel structures - Part 5: Piling
- SS-ENV-1994-1-2 - Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
- SS-ISO-4701 - Iron ores and direct reduced iron - Determination of size distribution by sieving (ISO 4701:2008, IDT)
- SS-ISO-4892-4 - Plastics - Methods of exposure to laboratory light sources - Part 4: Open-flame carbon-arc lamps (ISO 4892-4:2004, IDT)
- SS-ISO-5006 - Earth-moving machinery - Operator's field of view - Test method and performance criteria (ISO 5006:2017, IDT)
- UNE-EN-1090-1 - Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
- UNE-EN-1993-1-2 - Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
- UNE-EN-1994-1-2 - Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design.