Document Center List of Standards on Construction Equipment Including Scaffolding, Mixers For Concrete And Mortar, Etc. Lifting Equipment, See 53.020 Earth-Moving Machinery, See 53.100
ICS Code 91.220
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-C1716 - Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
- ASTM-D1561 - Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor (Withdrawn 2022)
- ASTM-D995 - Standard Specification for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures (Withdrawn 2009)
BSI:
- BS-1139-1.2 - Metal scaffolding. Tubes
- BS-1139-2.1 - Metal scaffolding. Couplers. Specification for steel couplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes
- BS-1139-2.2 - Metal scaffolding
- BS-1139-4 - Metal scaffolding
- BS-1139-5 - Metal scaffolding. Specification for materials, dimensions, design loads and safety requirements for service and working scaffolds made of prefabricated elements
- BS-1139-6 - Metal scaffolding
- BS-1139-6-TC - Tracked Changes. Metal scaffolding
- BS-1305 - Specification for batch type concrete mixers
- BS-13700 - Permanent counterweighted guardrail systems. Specification
- BS-1494 - Specification. Fixing accessories for building purposes
- BS-1676 - Specification for heaters for tar and bitumen (mobile and transportable)
- BS-2482 - Specification for timber scaffold boards
- BS-3963 - Method for testing the mixing performance of concrete mixers
- BS-4074 - Specification for steel trench struts
- BS-4340 - Glossary of formwork terms
- BS-5507-1 - Methods of test for falsework equipment
- BS-5507-3 - Methods of test for falsework equipment
- BS-5974 - Planning, design, setting up and use of temporary suspended access equipment. Code of practice
- BS-5975 - Code of practice for temporary works procedures and the permissible stress design of falsework
- BS-5975-1 - Temporary works
- BS-5975-2 - Temporary works
- BS-5975-TC - Tracked Changes. Code of practice for temporary works procedures and the permissible stress design of falsework
- BS-6100-12 - Building and civil engineering. Vocabulary
- BS-6100-6.5 - Glossary of building and civil engineering terms. Concrete and plaster. Formwork
- BS-6289-1 - Work platforms.
- BS-7171 - Specification for mobile elevating work platforms
- BS-7212 - Code of practice for the safe use of construction hoists
- BS-8410 - Code of practice for lightweight temporary cladding for weather protection and containment on construction works
- BS-8411 - Safety nets on construction sites and other works. Code of practice
- BS-8476 - Code of practice for the safe use of concrete pumps
- BS-8560 - Code of practice for the design of buildings incorporating safe work at height
- BS-8620 - Low level work platform with one working platform with side protection for use by one person with a maximum working platform height no greater than 2.5 m. Specification
- BS-EN-1004 - Mobile access and working towers made of prefabricated elements. Materials, dimensions, design loads, safety and performance requirements
- BS-EN-1004-2 - Mobile access and working towers made of prefabricated elements
- BS-EN-1004-2-TC - Tracked Changes. Mobile access and working towers made of prefabricated elements
- BS-EN-1009-1 - Machines for mechanical processing of minerals and similar solid materials. Safety
- BS-EN-1009-2 - Machines for mechanical processing of minerals and similar solid materials. Safety
- BS-EN-1009-3 - Machines for mechanical processing of minerals and similar solid materials. Safety
- BS-EN-1009-4 - Machines for mechanical processing of minerals and similar solid materials. Safety
- BS-EN-1065 - Adjustable telescopic steel props. Product specifications, design and assessment by calculation and tests
- BS-EN-12001 - Conveying, spraying and placing machines for concrete and mortar. Safety requirements
- BS-EN-12110 - Tunnelling machines. Air locks. Safety requirements
- BS-EN-12111 - Tunnelling machines. Road headers and continuous miners. Safety requirements
- BS-EN-12151 - Machinery and plants for the preparation of concrete and mortar. Safety requirements
- BS-EN-12336 - Tunnelling Machines. Shield Machines, Thrust Boring Machines, Auger Boring Machines, Lining Erection Equipment. Safety Requirements
- BS-EN-12418 - Masonry and stone cutting-off machines for job site. Safety
- BS-EN-12418-TC - Tracked Changes. Masonry and stone cutting-off machines for job site. Safety
- BS-EN-12629-1 - Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety
- BS-EN-12629-2 - Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety
- BS-EN-12629-4 - Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety
- BS-EN-12629-5-1 - Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety
- BS-EN-12629-5-2 - Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety
- BS-EN-12629-5-3 - Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety
- BS-EN-12629-6 - Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety
- BS-EN-12629-7 - Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety
- BS-EN-12629-8 - Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety
- BS-EN-12649 - Concrete compactors and smoothing machines. Safety
- BS-EN-12811-2 - Temporary works equipment
- BS-EN-12811-3 - Temporary works equipment
- BS-EN-12811-4 - Temporary works equipment
- BS-EN-13020 - Road surface treatment machines. Safety requirements
- BS-EN-13309 - Construction machinery. Electromagnetic compatibility of machines with internal power supply
- BS-EN-13331-1 - Trench lining systems
- BS-EN-13331-2 - Trench lining systems
- BS-EN-13374 - Temporary edge protection systems. Product specification. Test methods
- BS-EN-13862 - Floor cutting-off machines. Safety
- BS-EN-13862-TC - Tracked Changes. Floor cutting-off machines. Safety
- BS-EN-15027 - Transportable wall saw and wire saw equipment for job site. Safety
- BS-EN-16031 - Adjustable telescopic aluminium props. Product specifications, design and assessment by calculation and tests
- BS-EN-16191 - Tunnelling machinery. Safety requirements
- BS-EN-16228-1 - Drilling and foundation equipment. Safety
- BS-EN-16228-2 - Drilling and foundation equipment. Safety
- BS-EN-16228-3 - Drilling and foundation equipment. Safety
- BS-EN-16228-4 - Drilling and foundation equipment. Safety
- BS-EN-16719 - Transport platforms
- BS-EN-17293 - Temporary works equipment. Execution. Requirements for manufacturing
- BS-EN-39 - Loose steel tubes for tube and coupler scaffolds. Technical delivery conditions
- BS-EN-500-1 - Mobile road construction machinery. Safety
- BS-EN-500-2 - Mobile road construction machinery. Safety
- BS-EN-500-3 - Mobile road construction machinery. Safety
- BS-EN-500-4 - Mobile road construction machinery. Safety
- BS-EN-500-6 - Mobile road construction machinery. Safety
- BS-EN-74-1 - Couplers, spigot pins and baseplates for use in falsework and scaffolds
- BS-EN-74-2 - Couplers, spigot pins and baseplates for use in falsework and scaffolds
- BS-EN-74-2-TC - Tracked Changes. Couplers, spigot pins and baseplates for use in falsework and scaffolds
- BS-EN-74-3 - Couplers, spigot pins and baseplates for use in falsework and scaffolds
- BS-EN-791 - Drill rigs. Safety
- BS-EN-ISO-13766-1 - Earth-moving and building construction machinery. Electromagnetic compatibility (EMC) of machines with internal electrical power supply
- BS-EN-ISO-19432 - Building construction machinery and equipment. Portable, hand-held, internal combustion engine driven cut-off machines. Safety requirements
- BS-ISO-11886 - Building construction machinery and equipment. Pile driving and extracting equipment. Terminology and commercial specifications
- BS-ISO-13105-1 - Building construction machinery and equipment. Machinery for concrete surface floating and finishing
- BS-ISO-13105-1-TC - Tracked Changes. Building construction machinery and equipment. Machinery for concrete surface floating and finishing
- BS-ISO-13105-2 - Building construction machinery and equipment. Machinery for concrete surface floating and finishing
- BS-ISO-13105-2-TC - Tracked Changes. Building construction machinery and equipment. Machinery for concrete surface floating and finishing
- BS-ISO-15644 - Road construction and maintenance equipment. Chippings spreaders. Terminology and commercial specifications
- BS-ISO-15645 - Road construction and maintenance equipment. Road milling machinery. Terminology and commercial specifications
- BS-ISO-16039 - Road construction and maintenance equipment. Slipform pavers. Definitions and commercial specifications
- BS-ISO-17740-1 - Building construction machinery and equipment. Concrete placing systems for stationary equipment
- BS-ISO-18650-2 - Building construction machinery and equipment. Concrete mixers
- BS-ISO-18808 - Agricultural tyres for construction machines
- BS-ISO-19711-1 - Building construction machinery and equipment. Truck mixers
- BS-ISO-19711-2 - Building construction machinery and equipment. Truck mixers
- BS-ISO-19720-1 - Building construction machinery and equipment. Plants for the preparation of concrete and mortar
- BS-ISO-21573-1 - Building construction machinery and equipment. Concrete pumps
- BS-ISO-21573-1-TC - Tracked Changes. Building construction machinery and equipment. Concrete pumps
- BS-ISO-21573-2 - Building construction machinery and equipment. Concrete pumps
- BS-ISO-21873-1 - Building construction machinery and equipment. Mobile crushers
- BS-ISO-21873-2 - Building construction machinery and equipment. Mobile crushers
- BS-ISO-6085 - Building construction machinery and equipment. Self-loading mobile concrete mixers.
- DD-CEN-13778 - Mobile demolition machinery. Safety requirements
- PAS-1892 - Connected and automated plant (CAP). Defining and specifying the use of CAP in construction and maintenance works for the purposes of procurement and deployment. Specification
- PAS-250 - Low-level work platform with one working platform with side protection for use by one person with a maximum working platform height of less than 2.5 m. Specification
- PAS-8811 - Temporary works. Major infrastructure client procedures. Code of practice
- PAS-8812 - Temporary works. Application of European Standards in design. Guide
- PD-ISO-12603 - Building construction machinery and equipment. Classification
ISO:
- ISO-11375 - Building construction machinery and equipment - Terms and definitions
- ISO-11886 - Building construction machinery and equipment - Pile driving and extracting equipment - Terminology and commercial specifications
- ISO-12603 - Building construction machinery and equipment - Classification
- ISO-13105-1 - Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 1: Commercial specifications
- ISO-13105-2 - Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 2: Safety requirements and verification
- ISO-13105-2-AM1 - - Amendment 1
- ISO-13442 - Tyres and rims for construction machines
- ISO-15643 - Road construction and maintenance equipment - Bituminous binder sprayers and synchronous bituminous binder sprayers-chip spreaders - Terminology and commercial specifications
- ISO-15644 - Road construction and maintenance equipment - Chippings spreaders - Terminology and commercial specifications
- ISO-15645 - Road construction and maintenance equipment - Road milling machinery - Terminology and commercial specifications
- ISO-16039 - Road construction and maintenance equipment - Slipform pavers - Definitions and commercial specifications
- ISO-17740-1 - Building construction machinery and equipment - Concrete placing systems for stationary equipment - Part 1: Terminology and commercial specifications
- ISO-18650-1 - Building construction machinery and equipment - Concrete mixers - Part 1: Commercial specifications
- ISO-18650-2 - Building construction machinery and equipment - Concrete mixers - Part 2: Procedure for examination of mixing efficiency
- ISO-18651-1 - Building construction machinery and equipment - Internal vibrators for concrete - Part 1: Terminology and commercial specifications
- ISO-18652 - Building construction machinery and equipment - External vibrators for concrete
- ISO-18808 - Agricultural tyres for construction machines
- ISO-19432 - Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements
- ISO-19433 - Building construction machinery and equipment - Pedestrian-controlled vibratory plates - Terminology and commercial specifications
- ISO-19452 - Building construction machinery and equipment - Pedestrian-controlled vibratory (percussion) rammers - Terminology and commercial specifications
- ISO-19711-1 - Building construction machinery and equipment - Truck mixers - Part 1: Terminology and commercial specifications
- ISO-19711-2 - Building construction machinery and equipment - Truck mixers - Part 2: Safety requirements
- ISO-19720-1 - Building construction machinery and equipment - Plants for the preparation of concrete and mortar - Part 1: Terminology and commercial specifications
- ISO-21573-1 - Building construction machinery and equipment - Concrete pumps - Part 1: Commercial specifications
- ISO-21573-2 - Building construction machinery and equipment - Concrete pumps - Part 2: Procedure for examination of technical parameters
- ISO-21592 - Building construction machinery and equipment - Concrete spraying machines - Terminology and commercial specifications
- ISO-21873-1 - Building construction machinery and equipment - Mobile crushers - Part 1: Terminology and commercial specifications
- ISO-21873-2 - Building construction machinery and equipment - Mobile crushers - Part 2: Safety requirements and verification
- ISO-6085 - Building construction machinery and equipment - Self-loading mobile concrete mixers - Safety requirements and verification
Other SDOs:
- DIN-EN-1004 - Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements; German version EN 1004:2004
- DIN-EN-12001 - Conveying, spraying and placing machines for concrete and mortar - Safety requirements; German version EN 12001:2012
- DIN-EN-12110 - Tunnelling machines - Air locks - Safety requirements; German version EN 12110:2014
- DIN-EN-12111 - Tunnelling machines - Road headers and continuous miners - Safety requirements
- DIN-EN-12336 - Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements; German version EN 12336:2005+A1:2008
- DIN-EN-12629-2 - Part 2: Block-Making Machines, Machines for the Manufacture of Constructional Product
- DIN-EN-12629-3 - Part 3: Slide & Turntable Machines, Machines for the Manufacture of Constructional Pro
- DIN-EN-12629-5-1 - Part 5-1: Pipe Making Machines Manufacturing in the Vertical Axis, Machines for the Ma
- DIN-EN-12629-5-2 - Part 5-2: Pipe Making Machines Manufacturing in the Horizontal Axis, Machines for The
- DIN-EN-12629-5-3 - Part 5-3: Pipe Prestressing Machines, Machines for the Manufacture of Constructional P
- DIN-EN-12629-5-4 - Part 5-4: Concrete Pipe Coating Machines, Machines for the Manufacture of Construction
- DIN-EN-12629-6 - Part 6: Stationary & Mobile Equipment for the Manufacture of Precast Reinforced Produc
- DIN-EN-12629-7 - Part 7: Stationary & Mobile Equipment for Long Line Manufacture of Prestressed Product
- DIN-EN-12629-8 - Part 8: Machines & Equipment for the Manufacture of Constructional Products From Calci
- DIN-EN-12812 - Falsework - Performance Requirements & General Design
- DIN-EN-12813 - Temporary Works Equipment, Loadbearing Towers of Prefabricated Components, Particular
- DIN-EN-13020 - Road surface treatment machines - Safety requirements; German version EN 13020:2015
- DIN-EN-13374 - Temporary edge protection systems - Product specification - Test methods; German version EN 13374:2013
- DIN-EN-13862 - Floor Cutting-Off Machines - Safety
- DIN-EN-500-4 - Part 4: Specific Requirements for Compaction Machines, Mobile Road Construction Machin
- DIN-EN-500-6 - Part 6: Specific Requirements for Paver-Finishers, Mobile Road Construction Machinery
- DIN-EN-74-1 - Part 1: Couplers for Tubes - Requirements & Test Procedures, Couplers, Spigot Pins & B
- DIN-EN-ISO-19432 - Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012)
- EN-1004 - Mobile Access & Working Towers Made of Prefabricated Elements, Materials, Dimensions,
- EN-12001 - Conveying, spraying and placing machines for concrete and mortar - Safety requirements
- EN-12110 - Tunnelling machines - Air locks - Safety requirements
- EN-12111 - Tunnelling machines - Road headers and continuous miners - Safety requirements
- EN-12151 - Machinery & Plants for the Preparation of Concrete & Mortar - Safety Requirements
- EN-12336 - Tunnelling Machines - Shield Machines, Thrust Boring Machines, Auger Boring Machines,
- EN-12418 - Masonry & Stone Cutting-Off Machines for Job Site - Safety
- EN-12629-2 - Part 2: Block-Making Machines, Machines for the Manufacture of Constructional Product
- EN-12629-3 - Part 3: Slide & Turntable Machines, Machines for the Manufacture of Constructional Pro
- EN-12629-5-1 - Part 5-1: Pipe Making Machines Manufacturing in the Vertical Axis, Machines for the Ma
- EN-12629-5-2 - Part 5-2: Pipe Making Machines Manufacturing in the Horizontal Axis, Machines for The
- EN-12629-5-3 - Part 5-3: Pipe Prestressing Machines, Machines for the Manufacture of Constructional P
- EN-12629-5-4 - Part 5-4: Concrete Pipe Coating Machines, Machines for the Manufacture of Construction
- EN-12629-6 - Part 6: Stationary & Mobile Equipment for the Manufacture of Precast Reinforced Produc
- EN-12629-7 - Part 7: Stationary & Mobile Equipment for Long Line Manufacture of Prestressed Product
- EN-12629-8 - Part 8: Machines & Equipment for the Manufacture of Constructional Products From Calci
- EN-12649 - Concrete Compactors & Smoothing Machines, Safety
- EN-12811-4 - Temporary works equipment - Part 4: Protection fans for scaffolds - Performance requirements and product design
- EN-12812 - Falsework, Performance Requirements & General Design
- EN-12813 - Temporary Works Equipment, Loadbearing Towers of Prefabricated Components, Particular
- EN-13020 - Road surface treatment machines - Safety requirements
- EN-13309 - Construction Machinery - Electromagnetic Compatibility of Machines With Internal Power
- EN-13331-1 - Part 1: Product Specifications, Trench Lining Systems
- EN-13331-2 - Part 2: Assessment by Calculation or Test, Trench Lining Systems
- EN-13374 - Temporary edge protection systems - Product specification - Test methods
- EN-13862 - Floor Cutting-Off Machines - Safety
- EN-15027 - Transportable Wall Saw & Wire Saw Equipment for Job Site - Safety
- EN-16031 - Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests
- EN-16191 - Tunnelling machinery - Safety requirements
- EN-16719 - Transport platforms
- EN-500-1 - Part 1: Common Requirements, Mobile Road Construction Machinery - Safety
- EN-500-2 - Part 2: Specific Requirements for Road-Milling Machines - Mobile Road Construction Mac
- EN-500-3 - Part 3: Specific Requirements for Soil-Stablizing Machines & Recycling Machines, Mobil
- EN-500-6 - Part 6: Specific Requirements for Paver-Finishers, Mobile Road Construction Machinery
- EN-74-1 - Couplers, Spigot Pins & Baseplates for Use in Falsework & Scaffolds, Couplers for Tube
- EN-74-2 - Couplers, Spigot Pins & Baseplates for Use in Falsework & Scaffolds, Special Couplers,
- EN-74-3 - Couplers, Spigot Pins & Base Plates for Use in Falsework & Scaffolds, Plain Base Plate
- EN-791 - Drill rigs - Safety
- EN-ISO-19432 - Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012)
- JIS-A-8610 - Building construction machinery and equipment -- Internal vibrators for concrete
- JIS-A-8611 - Building construction machinery and equipment -- External vibrators for concrete
- JIS-A-8960 - Vertical protective net for construction work
- SIS-CEN/TS-13381-1 - Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
- SIS-CEN/TS-13778 - Mobile demolition machinery - Safety requirements
- SIS-ISO/TR-12603 - Building construction machinery and equipment - Classification
- SIS-ISO/TS-8000-65 - Data quality - Part 65: Process Measurement Questionnaire
- SS-EN-1004 - Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements
- SS-EN-1004-1 - Mobile access and working towers made of prefabricated elements - Part 1: Materials, dimensions, design loads, safety and performance requirements
- SS-EN-1004-2 - Mobile access and working towers made of prefabricated elements - Part 2: Rules and guidelines for the preparation of an instruction manual
- SS-EN-1009-1 - Machines for mechanical processing of minerals and similar solid materials - Safety - Part 1: Common requirements for machinery and processing plants
- SS-EN-1009-2 - Machines for mechanical processing of minerals and similar solid materials - Safety - Part 2: Specific requirements for feeding machinery and continuous handling equipment
- SS-EN-1009-3 - Machines for mechanical processing of minerals and similar solid materials - Safety - Part 3: Specific requirements for crushing and milling machinery
- SS-EN-1009-4 - Machines for mechanical processing of minerals and similar solid materials - Safety - Part 4: Specific requirements for screening machinery
- SS-EN-1009-5 - Machines for mechanical processing of minerals and similar solid materials - Safety - Part 5: Specific requirements for cleaning, recycling, sorting and mud treatment machinery
- SS-EN-12001 - Conveying, spraying and placing machines for concrete and mortar - Safety requirements
- SS-EN-12110 - Tunnelling machines - Air locks - Safety requirements
- SS-EN-12111 - Tunnelling machines - Road headers and continuous miners - Safety requirements
- SS-EN-12151 - Machinery and plants for the preparation of concrete and mortar - Safety requirements
- SS-EN-12336 - Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements
- SS-EN-12418 - Masonry and stone cutting-off machines for job site - Safety
- SS-EN-12629-1 - Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements
- SS-EN-12629-2 - Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines
- SS-EN-12629-3 - Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines
- SS-EN-12629-4 - Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4: Concrete roof tile making machines
- SS-EN-12629-5-1 - Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis
- SS-EN-12629-5-2 - Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis
- SS-EN-12629-5-3 - Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines
- SS-EN-12629-5-4 - Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines
- SS-EN-12629-6 - Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products
- SS-EN-12629-7 - Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products
- SS-EN-12629-8 - Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
- SS-EN-12649 - Concrete compactors and smoothing machines - Safety
- SS-EN-12810-1 - Facade scaffolds made of prefabricated components - Part 1: Product specifications
- SS-EN-12810-2 - Facade scaffolds made of prefabricated components - Part 2: Particular methods of structural design
- SS-EN-12811-3 - Temporary works equipment - Part 3: Load testing
- SS-EN-12811-4 - Temporary works equipment - Part 4: Protection fans for scaffolds - Performance requirements and product design
- SS-EN-12812 - Falsework - Performance requirements and general design
- SS-EN-1298 - Mobile access and working towers - Rules and guidelines for the preparation of an instruction manual
- SS-EN-13020 - Road surface treatment machines - Safety requirements
- SS-EN-13270 - Surface active agents - Determination of the active matter content in alkyldimethylbetaines
- SS-EN-13309 - Construction machinery - Electromagnetic compatibility of machines with internal power supply
- SS-EN-13374 - Temporary edge protection systems - Product specification - Test methods
- SS-EN-13377 - Prefabricated timber formwork beams - Requirements, classification and assessment
- SS-EN-13862 - Floor cutting-off machines - Safety
- SS-EN-15027 - Transportable wall saw and wire saw equipment for job site - Safety
- SS-EN-16031 - Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests
- SS-EN-16191 - Tunnelling machinery - Safety requirements
- SS-EN-16228-1 - Drilling and foundation equipment - Safety - Part 1: Common requirements
- SS-EN-16228-2 - Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
- SS-EN-16228-3 - Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
- SS-EN-16228-4 - Drilling and foundation equipment - Safety - Part 4: Foundation equipment
- SS-EN-16228-5 - Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment
- SS-EN-16228-6 - Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
- SS-EN-16228-7 - Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment
- SS-EN-16719 - Transport platforms
- SS-EN-17232 - Water play equipment and features - Safety requirements, test methods and operational requirements
- SS-EN-374-3 - Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals
- SS-EN-39 - Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions
- SS-EN-474-1 - Earth-moving machinery - Safety - Part 1: General requirements
- SS-EN-500-1 - Mobile road construction machinery - Safety - Part 1: Common requirements
- SS-EN-500-2 - Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines
- SS-EN-500-3 - Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines
- SS-EN-500-4 - Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines
- SS-EN-500-5 - Mobile construction machinery - Safety - Part 5: Specific requirements for joint cutters
- SS-EN-500-6 - Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers
- SS-EN-536 - Road construction machines - Mixing plants for road construction materials - Safety requirements
- SS-EN-74-1 - Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
- SS-EN-74-2 - Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
- SS-EN-74-3 - Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures
- SS-EN-791 - Drill rigs - Safety
- SS-EN-815 - Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements
- SS-EN-815-AM1 - Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock
- SS-EN-996 - Piling equipment - Safety requirements
- SS-EN-ISO-13766-1 - Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 1: General EMC requirements under typical electromagnetic environmental conditions (ISO 13766-1:2018)
- SS-EN-ISO-13766-2 - Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018)
- SS-EN-ISO-19226 - Nuclear energy - Determination of neutron fluence and displacement per atom (dpa) in reactor vessel and internals (ISO 19226:2017)
- SS-EN-ISO-19361 - Measurement of radioactivity - Determination of beta emitters activities - Test method using liquid scintillation counting (ISO 19361:2017)
- SS-EN-ISO-19432 - Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012)
- SS-EN-ISO-19432-1 - Building construction machinery and equipment - Portable, hand-held, internal combustion engine-driven abrasive cutting machines - Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels (ISO 19432-1:2020)
- SS-ENV-500-6 - Mobile road construction machinery - Safety - Part 6: Special requirements for paver-finishers
- SS-ISO-11375 - Building construction machinery and equipment - Terms and definitions (ISO 11375:1998, IDT)
- SS-ISO-11886 - Building construction machinery and equipment Pile driving and extracting equipment Terminology and commercial specifications (ISO 11886:2002, IDT)
- SS-ISO-13105-1 - Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 1: Terms and commercial specifications (ISO 13105-1:2014, IDT)
- SS-ISO-13105-2 - Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 2: Safety requirements and verification (ISO 13105-2:2014, IDT)
- SS-ISO-13105-2-AM1 - Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 2: Safety requirements and verification (ISO 13105-2:2014/Amd 1:2017, IDT)
- SS-ISO-13442 - Tyres and rims for construction machines (ISO 13442:2004, IDT)
- SS-ISO-15644 - Road construction and maintenance equipment Chippings spreaders Terminology and commercial specifications (ISO 15644:2002, IDT)
- SS-ISO-15689 - Road construction and maintenance equipment - Powder binder spreaders - Terminology and commercial specifications (ISO 15689:2003, IDT)
- SS-ISO-17455 - Plastics piping systems - Multilayer pipes - Determination of the oxygen permeability of the barrier pipe (ISO 17455:2005, IDT)
- SS-ISO-17740-1 - Building construction machinery and equipment - Concrete placing systems for stationary equipment - Part 1: Terminology and commercial specifications (ISO 17740-1:2015, IDT)
- SS-ISO-18650-1 - Building construction machinery and equipment Concrete mixers Part 1: Commercial specifications (ISO 18650-1:2021, IDT)
- SS-ISO-18650-2 - Building construction machinery and equipment - Concrete mixers - Part 2: Procedure for examination of mixing efficiency (ISO 18650-2:2014, IDT)
- SS-ISO-18651-1 - Building construction machinery and equipment - Internal vibrators for concrete - Part 1: Terminology and commercial specifications (ISO 18651-1:2011, IDT)
- SS-ISO-18652 - Building construction machinery and equipment External vibrators for concrete (ISO 18652:2005, IDT)
- SS-ISO-19433 - Building construction machinery and equipment - Pedestrian-controlled vibratory plates - Terminology and commercial specifications (ISO 19433:2008, IDT)
- SS-ISO-19452 - Building construction machinery and equipment - Pedestrian-controlled vibratory (percussion) rammers - Terminology and commercial specifications (ISO 19452:2008, IDT)
- SS-ISO-19711-1 - Building construction machinery and equipment - Truck mixers - Part 1: Terminology and commercial specifications (ISO 19711-1:2018, IDT)
- SS-ISO-19720-1 - Building construction machinery and equipment - Plants for the preparation of concrete and mortar - Part 1: Terminology and commercial specifications (ISO 19720-1:2017, IDT)
- SS-ISO-21573-1 - Building construction machinery and equipment - Concrete pumps - Part 1: Terminology and commercial specifications (ISO 21573-1:2014, IDT)
- SS-ISO-21573-2 - Building construction machinery and equipment Concrete pumps Part 2: Procedure for examination of technical parameters (ISO 21573-2:2020, IDT)
- SS-ISO-21592 - Building construction machinery and equipment Concrete spraying machines Terminology and commercial specifications (ISO 21592:2006, IDT)
- SS-ISO-21873-1 - Building construction machinery and equipment - Mobile crushers - Part 1: Terminology and commercial specifications (ISO 21873-1:2015, IDT)
- SS-ISO-21873-2 - Building construction machinery and equipment - Mobile crushers - Part 2: Safety requirements and verification (ISO 21873-2:2019, IDT)
- SS-ISO-6085 - Building construction machinery and equipment Self-loading mobile concrete mixers Safety requirements and verification (ISO 6085:2023, IDT)