ASTM-A867 › Historical Revision Information
Standard Specification for Iron-Silicon Relay Steels
The following bibliographic material is provided to assist you with your purchasing decision:
Scope
1.1 This specification covers wrought iron-silicon (Fe-Si) steels that are generally used in the manufacture of electromechanical devices, such as relays and solenoids, requiring higher electrical resistivity, higher permeability, and lower coercivity and residual magnetism than provided by either carbon steels or soft magnetic low-carbon irons. The steels covered in this specification are:
Steel Type | Nominal Composition |
1 | 1.1 % Si-Fe |
1F | 1.1 % Si-Fe free machining |
2 | 2.3 % Si-Fe |
2F | 2.3 % Si-Fe free machining |
3 | 4.0 % Si-Fe |
1.2 This specification covers steels in the form and condition required for fabrication into parts. The fabricated parts typically require a final heat treatment to obtain the desired magnetic performance. The term mill annealed as used in this specification applies to a heat treatment, typically applied by the producer, intended to improve formability. The mill anneal does not provide the optimum magnetic performance and is not intended to replace the need for the finish annealing of parts.
1.3 This specification covers steels in the form of forging billets, hot-rolled bar and strip, cold-finished bar, wire, and cold-rolled strip in thicknesses up to 0.250 in. (6.35 mm).
1.4 This specification does not cover electrical sheet steels used in transformer and motor laminations.
1.5 This specification does not cover powder metallurgy materials capable of being processed into magnetic core components having similar silicon contents.
1.6 The values stated in customary (cgs-emu and inch-pound) units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units which are provided for information only and are not considered standard.
Keywords
coercive field strength; iron-silicon steel; relay steel; ICS Number Code 77.140.50 (Flat steel products and semi-products)
To find similar documents by ASTM Volume:
To find similar documents by classification:
This document comes with our free Notification Service, good for the life of the document.
This document is available in either Paper or PDF format.
Document Number
ASTM-A867-03
Revision Level
2003 EDITION
Status
Superseded
Modification Type
Revision
Publication Date
May 10, 2003
Document Type
Specification
Page Count
4 pages
Committee Number
A06.02