03.04: Magnetic Properties
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-A1009 - Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications
- ASTM-A1013 - Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
- ASTM-A1036 - Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
- ASTM-A1054 - Standard Specification for Sintered Ferrite Permanent Magnets
- ASTM-A1071 - Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
- ASTM-A1086 - Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types
- ASTM-A1101 - Standard Specification for Sintered and Fully Dense Neodymium Iron Boron (NdFeB) Permanent Magnets
- ASTM-A1102 - Standard Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets
- ASTM-A34 - Standard Practice for Sampling and Procurement Testing of Magnetic Materials
- ASTM-A340 - Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
- ASTM-A341 - Standard Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods
- ASTM-A342 - Standard Test Methods for Permeability of Weakly Magnetic Materials
- ASTM-A343 - Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
- ASTM-A345 - Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
- ASTM-A346 - Standard Test Method for Alternating-Current Magnetic Performance of Laminated Core Specimens Using the Dieterly Bridge Method (Withdrawn 1998)
- ASTM-A348 - Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
- ASTM-A596 - Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
- ASTM-A598 - Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
- ASTM-A664 - Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
- ASTM-A665 - Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed, Types 23G048, 27G053, 30G058, and 35G066 (Withdrawn 1987)
- ASTM-A665M - Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed, Types 23G106M, 27G117M, 30G128M, and 35G146M (Withdrawn 1987)
- ASTM-A677 - Standard Specification for Nonoriented Electrical Steel Fully Processed Types
- ASTM-A677M - Standard Specification for Nonoriented Electrical Steel, Fully Processed Types (Metric) (Withdrawn 2000)
- ASTM-A683 - Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
- ASTM-A683M - Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types [Metric] (Withdrawn 1999)
- ASTM-A697 - Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
- ASTM-A698 - Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
- ASTM-A712 - Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
- ASTM-A717 - Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
- ASTM-A718 - Test Method for Surface Insulation Resistivity of Multi-Strip Specimens (Withdrawn 1996)
- ASTM-A719 - Standard Test Method for Lamination Factor of Magnetic Materials
- ASTM-A720 - Standard Test Method for Ductility of Nonoriented Electrical Steel
- ASTM-A721 - Standard Test Method for Ductility of Oriented Electrical Steel
- ASTM-A725 - Specification for Flat-Rolled, Grain-Oriented, Silicon Iron, Electrical Steel, Fully Processed, Types 27H076, 30H083, 35H094 (Withdrawn 1988)
- ASTM-A725M - Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed, Types 27H168m, 30H183m, 35H207m (Withdrawn 1988)
- ASTM-A726 - Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
- ASTM-A726M - Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semi-Processed Types [Metric] (Withdrawn 1998)
- ASTM-A753 - Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
- ASTM-A772 - Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
- ASTM-A773 - Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
- ASTM-A801 - Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
- ASTM-A804 - Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
- ASTM-A811 - Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques
- ASTM-A838 - Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
- ASTM-A839 - Standard Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications
- ASTM-A840 - Standard Specification for Fully Processed Magnetic Lamination Steel (Withdrawn 2011)
- ASTM-A840M - Standard Specification for Fully Processed Magnetic Lamination Steel (Metric) (Withdrawn 2000)
- ASTM-A843 - Specification for Flat-Rolled, Grain-Oriented, High Permeability, Silicon-Iron Electrical Steel, Fully Processed, Types 27P066, 30P070, 35P076 (Withdrawn 1987)
- ASTM-A848 - Standard Specification for Low-Carbon Magnetic Iron
- ASTM-A867 - Standard Specification for Iron-Silicon Relay Steels
- ASTM-A876 - Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
- ASTM-A876M - Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types [Metric] (Withdrawn 1998)
- ASTM-A883 - Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials (Withdrawn 2006)
- ASTM-A889 - Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
- ASTM-A893 - Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
- ASTM-A894 - Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials (Withdrawn 2017)
- ASTM-A900 - Standard Test Method for Lamination Factor of Amorphous Magnetic Strip
- ASTM-A901 - Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
- ASTM-A904 - Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts
- ASTM-A912 - Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
- ASTM-A927 - Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
- ASTM-A932 - Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
- ASTM-A937 - Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
- ASTM-A971 - Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
- ASTM-A976 - Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application
- ASTM-A977 - Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
- ASTM-B305 - Test Method for Maximum Loading Stress at Temperature of Thermostat Metals ( Cantilever Beam Method)
- ASTM-B583 - Test Method for Porosity in Cold Coatings on Metal Substrates (Withdrawn 1985)
- ASTM-C1331 - Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
- ASTM-C1332 - Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
- ASTM-E2374 - Standard Guide for Acoustic Emission System Performance Verification
- ASTM-E2375 - Standard Practice for Ultrasonic Testing of Wrought Products
- ASTM-E2422 - Standard Digital Reference Images for Inspection of Aluminum Castings
- ASTM-E2445 - Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems
- ASTM-E2446 - Standard Practice for Manufacturing Characterization of Computed Radiography Systems
- ASTM-E2478 - Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission
- ASTM-E2479 - Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L
CR ) Waves - ASTM-E2491 - Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
- ASTM-E2533 - Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications
- ASTM-E2534 - Standard Practice for Targeted Defect Detection Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
- ASTM-E2580 - Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
- ASTM-E2581 - Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications
- ASTM-E2582 - Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
- ASTM-E2597 - Standard Practice for Manufacturing Characterization of Digital Detector Arrays
- ASTM-E2598 - Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers
- ASTM-E2660 - Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications
- ASTM-E2661 - Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications
- ASTM-E2662 - Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
- ASTM-E2663 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods
- ASTM-E2669 - Standard Digital Reference Images for Titanium Castings
- ASTM-E2698 - Standard Guide for Forensic Examination of Fabrics and Cordage
- ASTM-E2699 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods
- ASTM-E2700 - Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
- ASTM-E2736 - Standard Guide for Digital Detector Array Radiography
- ASTM-E2737 - Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability
- ASTM-E2738 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods
- ASTM-E2767 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods
- ASTM-E2775 - Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction
- ASTM-E2861 - Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams
- ASTM-E2862 - Standard Practice for Probability of Detection Analysis for Hit/Miss Data
- ASTM-E2863 - Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization
- ASTM-E2868 - Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness
- ASTM-E2869 - Standard Digital Reference Images for Magnesium Castings
- ASTM-E2884 - Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays
- ASTM-E2903 - Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes
- ASTM-E2904 - Standard Practice for Characterization and Verification of Linear Phased Array Ultrasonic Probes
- ASTM-E2905 - Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods
- ASTM-E2906 - Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles
- ASTM-E2907 - Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing
- ASTM-E2928 - Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique
- ASTM-E2929 - Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction
- ASTM-E2930 - Standard Practice for Pressure Decay Leak Test Method
- ASTM-E2934 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods
- ASTM-E2971 - Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
- ASTM-E2973 - Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die Castings
- ASTM-E2981 - Standard Guide for Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications
- ASTM-E2982 - Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications
- ASTM-E2983 - Standard Guide for Application of Acoustic Emission for Structural Health Monitoring
- ASTM-E2984 - Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization
- ASTM-E2985 - Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy
- ASTM-E3022 - Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
- ASTM-E3023 - Standard Practice for Probability of Detection Analysis for
รข Versusa Data - ASTM-E3024 - Standard Practice for Magnetic Particle Testing for General Industry
- ASTM-E3030 - Standard Digital Reference Images for Heavy-Walled (2 to 4
1 2 - ASTM-E3044 - Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints
- ASTM-E3045 - Standard Practice for Crack Detection Using Vibroacoustic Thermography
- ASTM-E3052 - Standard Practice for Examination of Carbon Steel Welds Using An Eddy Current Array
- ASTM-E3081 - Standard Practice for Outlier Screening Using Process Compensated Resonance Testing via Swept Sine Input for Metallic and Non-Metallic Parts
- ASTM-E3100 - Standard Guide for Acoustic Emission Examination of Concrete Structures
- ASTM-E3101 - Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints
- ASTM-E3102 - Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application
- ASTM-E3147 - Standard Practice for Evaluating DICONDE Interoperability of Nondestructive Testing and Inspection Systems
- ASTM-E3167 - Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion Joints
- ASTM-E3168 - Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters
- ASTM-E3169 - Standard Guide for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
- ASTM-E3170 - Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints
- ASTM-E3185 - Standard Digital Reference Images for Tin Bronze Castings
- ASTM-E3213 - Standard Practice for Part-to-Itself Examination Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
- ASTM-E3267 - Standard Guide for Building Information Models and Archiving for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
- ASTM-E3353 - Standard Guide for In-Process Monitoring Using Optical and Thermal Methods for Laser Powder Bed Fusion
- ASTM-E3370 - Standard Practice for Matrix Array Ultrasonic Testing of Composites, Sandwich Core Constructions, and Metals Used in Aerospace Applications
- ASTM-E3375 - Standard Practice for Cone Beam Computed Tomographic (CT) Examination
- ASTM-F788 - Standard Practice for Radiographic Examination Using Digital Detector Arrays