ASTM-D751 › Historical Revision Information
Standard Test Methods for Coated Fabrics
The following bibliographic material is provided to assist you with your purchasing decision:
Scope
1.1 These test methods are applicable, but not limited to, rubber-coated fabrics, that is, tarpaulins, rainwear, and similar products.
1.2 The scope of each of these test methods appears in the section in which the test method is described.
1.3 The test methods appear in the following sections:
Test Method | Section |
Dimensions and Mass | 7-10 |
Breaking Strength | 11 |
Procedure A-Grab Test Method | 12-15 |
Procedure B-Cut Strip Test Method | 16 |
Elongation | 17 |
Bursting Strength | 18-21 |
Puncture Resistance | 22-25 |
Tearing Strength | 26 |
Procedure A-Pendulum Method | 27-32 |
Procedure B-Tongue Tear Method | 33-36 |
Trapezoidal Tear | 37-40 |
Hydrostatic Resistance | 41 |
Procedure A-Mullen Type Tester | 42-45 |
Procedure B-Rising Water Column Tester | 46-49 |
Adhesion Coating (to Fabrics) | 50-53 |
Strength of Coating | 54-58 |
Tack-Tear Resistance | 59-63 |
Low Temperature Bend Test | 64 |
Low Temperature Impact Test | 65 |
Low-Temperature Crack Resistance | 66-70 |
Seam Strength | 71-76 |
Accelerated Heat Aging (Oven Method) | 77-84 |
Dead Load Seam Strength | 85-88 |
Blocking Resistance at Elevated Temperatures | 89-93 |
Crush Resistance | 94-98 |
Wicking of Coated Cloth | 99-103 |
1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Keywords
coated fabrics; physical properties; rubber; ICS Number Code 59.080.40 (Coated fabrics)
To find similar documents by ASTM Volume:
09.02 (Rubber Products, Industrial - Specifications and Related Test Methods; Gaskets; Tires)
To find similar documents by classification:
This document comes with our free Notification Service, good for the life of the document.
This document is available in either Paper or PDF format.
Document Number
ASTM-D751-00e1
Revision Level
2000(E1) EDITION
Status
Superseded
Modification Type
Editorially changed
Publication Date
April 1, 2005
Document Type
Test Method
Page Count
20 pages
Committee Number
D11.37