09.02: Rubber Products, Industrial - Specifications and Related Test Methods; Gaskets; Tires
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-D1330 - Standard Specification for Rubber Sheet Gaskets
- ASTM-D1414 - Standard Test Methods for Rubber O-Rings
- ASTM-D1680 - Methods of Testing Automotive Air Conditioning Hose (Withdrawn 1988)
- ASTM-D1764 - Standard Specification for Rubber Latex Products for Automotive Applications (Withdrawn 2003)
- ASTM-D1869 - Standard Specification for Rubber Rings for Fiber-Reinforced Cement Pipe
- ASTM-D2000 - Standard Classification System for Rubber Products in Automotive Applications
- ASTM-D2136 - Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
- ASTM-D2137 - Standard Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics
- ASTM-D2433 - Standard Test Methods for Rubber Thread (Withdrawn 2012)
- ASTM-D2527 - Standard Specification for Rubber Seals—Splice Strength
- ASTM-D2769 - Method of Testing Rubber Hose Used for Liquefied Petroleum Gas Extractable Material (Withdrawn 1986)
- ASTM-D2934 - Method of Testing for Compatibility of Vulcanized Rubber Seals--Compatibility with Service Fluids (Withdrawn 1993)
- ASTM-D3041 - Method of Testing Coated Fabrics-Ozone Cracking in a Chamber (Withdrawn 1987)
- ASTM-D3389 - Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
- ASTM-D3393 - Standard Specification for Coated Fabrics—Waterproofness
- ASTM-D3491 - Standard Test Methods for Vulcanizable Rubber Tank and Pipe Lining (Withdrawn 1996)
- ASTM-D3492 - Standard Specification for Rubber Contraceptives (Male Condoms)
- ASTM-D3571 - Consumer Product Specification for Household Laundry and Dishwasher Water Inlet Hose (Withdrawn 2000)
- ASTM-D3572 - Consumer Product Specification for Household Laundry and Dishwasher Drain Hose (Withdrawn 1997)
- ASTM-D3573 - Consumer Product Specification for Sink Spray Hose (Withdrawn 1998)
- ASTM-D3577 - Standard Specification for Rubber Surgical Gloves
- ASTM-D3578 - Standard Specification for Rubber Examination Gloves
- ASTM-D3579 - Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type
- ASTM-D3667 - Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
- ASTM-D3738 - Standard Specification for Rubber-Coated Cloth Hospital Sheeting
- ASTM-D3771 - Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
- ASTM-D3772 - Standard Specification for Industrial Rubber Finger Cots
- ASTM-D378 - Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type
- ASTM-D380 - Standard Test Methods for Rubber Hose
- ASTM-D3832 - Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
- ASTM-D3854 - Standard Test Method for Rubber Thread-Resistance to Dry Heat (Withdrawn 2016)
- ASTM-D3855 - Standard Test Method for Rubber Thread-Deterioration Due to Standard Washing Solution Treatment (Withdrawn 2016)
- ASTM-D3899 - Standard Specification for Rubber Contraceptives-Vaginal Diaphragms (Withdrawn 2002)
- ASTM-D3901 - Specification for Garden Hose, Consumer Product (Withdrawn 1997)
- ASTM-D3902 - Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas
- ASTM-D3903 - Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
- ASTM-D3959 - Standard Test Method for Rubber- and Plastic-Coated Fabrics—Discoloration Sensitivity to Tobacco Smoke
- ASTM-D4005 - Standard Test Method for Plastic-Coated Fabrics—Completeness of Fusion of PVC Dispersion Coatings
- ASTM-D4237 - Test Method for Rubber Hose Used for Steam Applications (Withdrawn 1997)
- ASTM-D4264 - Test Method for Pressure Testing of Assemblies of Rubber-Lines Fire Hose and Rubber Booster Hose in Service on Interior Standpipes (Withdrawn 1997)
- ASTM-D4316 - Standard Specification for Elastomeric Water Bottles
- ASTM-D4679 - Standard Specification for Rubber General Purpose, Household or Beautician Gloves
- ASTM-D5151 - Standard Test Method for Detection of Holes in Medical Gloves
- ASTM-D5193 - Standard Test Method for Coated Fabrics—Air Retention
- ASTM-D5250 - Standard Specification for Poly(vinyl chloride) Gloves for Medical Application
- ASTM-D5712 - Standard Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method
- ASTM-D6124 - Standard Test Method for Residual Powder on Medical Gloves
- ASTM-D622 - Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System
- ASTM-D6284 - Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
- ASTM-D6319 - Standard Specification for Nitrile Examination Gloves for Medical Application
- ASTM-D6324 - Standard Specification for Male Condoms Made from Polyurethane
- ASTM-D6355 - Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves
- ASTM-D6499 - Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products
- ASTM-D6515 - Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
- ASTM-D6909 - Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer
- ASTM-D6976 - Standard Specification for Rubber Contraceptives—Vaginal Diaphragms
- ASTM-D6977 - Standard Specification for Polychloroprene Examination Gloves for Medical Application
- ASTM-D6978 - Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs
- ASTM-D7102 - Standard Guide for Determination of Endotoxin on Sterile Medical Gloves
- ASTM-D7103 - Standard Guide for Assessment of Medical Gloves
- ASTM-D7160 - Standard Practice for Determination of Expiration Dating for Medical Gloves
- ASTM-D7161 - Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions
- ASTM-D7198 - Standard Specification for Disposable Embalming Gloves for Single-Use Applications
- ASTM-D7246 - Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves
- ASTM-D7329 - Standard Specification for Food Preparation and Food Handling (Food Service) Gloves
- ASTM-D7427 - Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex
- ASTM-D751 - Standard Test Methods for Coated Fabrics
- ASTM-D7558 - Standard Test Method for Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram, and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves
- ASTM-D7661 - Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
- ASTM-D7850 - Standard Specification for Biological Properties of Industry Reference Materials (IRM)
- ASTM-D7866 - Standard Specification for Radiation Attenuating Protective Gloves
- ASTM-D7907 - Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves
- ASTM-D7999 - Standard Classification for Rubber Products in Natural Gas Pipeline Applications
- ASTM-D8015 - Standard Test Method for Dimensional Changes of Elastomer and Rubber Materials Due to Exposure to Gaseous Hydrocarbon Environments
- ASTM-D815 - Method of Testing Coated Fabrics Hydrogen Permeance (Withdrawn 1987)
- ASTM-D8238 - Standard Test Method for Immunological Assay to Quantify Extractable Guayule Natural Rubber (GNR) Proteins
- ASTM-D8389 - Standard Performance Specification for Urinary Intermittent Catheters
- ASTM-D8419 - Standard Specification for Anesthesia Reservoir Bags
- ASTM-E1136 - Standard Specification for P195/75R14 Radial Standard Reference Test Tire
- ASTM-F1016 - Standard Practice for Linear Tire Treadwear Data Analysis
- ASTM-F1035 - Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
- ASTM-F104 - Standard Classification System for Nonmetallic Gasket Materials
- ASTM-F1046 - Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing
- ASTM-F1082 - Standard Practice for Tires-Determining Precision for Test Method Standards (Withdrawn 2006)
- ASTM-F1087 - Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
- ASTM-F1112 - Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure
- ASTM-F112 - Standard Test Method for Sealability of Enveloped Gaskets
- ASTM-F118 - Standard Definitions of Terms Relating to Gaskets (Withdrawn 2022)
- ASTM-F1276 - Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials
- ASTM-F1277 - Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique (Withdrawn 2018)
- ASTM-F1315 - Standard Test Method for Density of a Sheet Gasket Material
- ASTM-F1364 - Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
- ASTM-F1426 - Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use
- ASTM-F145 - Standard Practice for Evaluating Flat-Faced Gasketed Joint Assemblies
- ASTM-F146 - Standard Test Methods for Fluid Resistance of Gasket Materials
- ASTM-F147 - Standard Test Method for Flexibility of Non-Metallic Gasket Materials
- ASTM-F148 - Standard Test Method for Binder Durability of Cork Composition Gasket Materials
- ASTM-F1502 - Standard Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles
- ASTM-F152 - Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials
- ASTM-F1572 - Standard Test Methods for Tire Performance Testing on Snow and Ice Surfaces
- ASTM-F1574 - Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
- ASTM-F1649 - Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems
- ASTM-F1650 - Standard Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions
- ASTM-F1805 - Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces
- ASTM-F1806 - Standard Practice for Tire Testing Operations–Basic Concepts and Terminology for Reference Tire Use
- ASTM-F1909 - Standard Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets
- ASTM-F1922 - Standard Test Method for Tires, Pneumatic, Vehicular, Highway
- ASTM-F1923 - Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway
- ASTM-F1971 - Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
- ASTM-F2325 - Standard Classification for Multi-Layer Steel (MLS) and Other Metal Layer Gaskets for Transportation Applications
- ASTM-F2378 - Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials
- ASTM-F2466 - Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications
- ASTM-F2467 - Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications
- ASTM-F2468 - Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
- ASTM-F2493 - Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
- ASTM-F2523 - Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers
- ASTM-F2524 - Standard Practice for Determination of Volatile Content for Formed-in-Place Gaskets (FIPG) Silicone Adhesives and Sealants for Transportation Applications
- ASTM-F2663 - Standard Test Method for Bead Unseating of Tubeless Passenger and Light Truck Tires
- ASTM-F2716 - Standard Practice for Comparison of Nonmetallic Flat Gaskets in High Pressure Saturated Steam
- ASTM-F2779 - Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface
- ASTM-F2803 - Standard Test Method for Evaluating Rim Slip Performance of Tires and Wheels
- ASTM-F2836 - Standard Practice for Gasket Constants for Bolted Joint Design
- ASTM-F2837 - Standard Test Method for Hot Compression Properties of Gasket Materials
- ASTM-F2838 - Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation
- ASTM-F2869 - Standard Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface
- ASTM-F2870 - Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
- ASTM-F2871 - Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
- ASTM-F2872 - Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire
- ASTM-F3015 - Standard Test Method for Accelerated Laboratory Roadwheel Generation of Belt Separation in Radial Passenger Car and Light Truck Tires through Load Range E
- ASTM-F3149 - Standard Practice for Determining the Maintenance Factor (
m ) and Yield Factor (y ) Loading Constants Applicable to Gasket Materials and Designs - ASTM-F3270 - Standard Practice for Compression versus Load Properties of Gasket Materials
- ASTM-F336 - Standard Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service
- ASTM-F36 - Standard Test Method for Compressibility and Recovery of Gasket Materials
- ASTM-F3611 - Standard Specification for P225/60R16 97S Radial Low Tread Depth Standard Reference Test Tire
- ASTM-F363 - Standard Test Method for Corrosion Testing of Gaskets
- ASTM-F3675 - Standard Specification for 225/45R17 94H XL Radial Standard Reference Test Tire
- ASTM-F3676 - Standard Specification for 225/45R17 94V XL Radial Standard Reference Test Tire
- ASTM-F3677 - Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire SW
- ASTM-F3678 - Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire SW
- ASTM-F37 - Standard Test Methods for Sealability of Gasket Materials
- ASTM-F376 - Test Method for Tires for Wet Traction Performance in Cornering (Withdrawn 1994)
- ASTM-F377 - Standard Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires
- ASTM-F38 - Standard Test Methods for Creep Relaxation of a Gasket Material
- ASTM-F403 - Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using Highway Vehicles (Withdrawn 2007)
- ASTM-F408 - Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer
- ASTM-F414 - Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger
- ASTM-F421 - Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires
- ASTM-F424 - Standard Test Method for Tires for Wet Driving Traction in Straight-Ahead Motion Using Highway Vehicles (Withdrawn 2006)
- ASTM-F433 - Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
- ASTM-F434 - Standard Test Method for Blow-Out Testing of Preformed Gaskets
- ASTM-F435 - Method of Test for Peak Wet Traction of Tires in Cornering With Driving Torque Application, Using Highway Vehicles (Withdrawn 1988)
- ASTM-F457 - Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
- ASTM-F460 - Method for Laboratory Test for Relative Cornering and Aligning Stiffnesses of Passenger Car Tires (Withdrawn 1985)
- ASTM-F495 - Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures
- ASTM-F516 - Method for Laboratory Test for Force and Moment Properties of Passenger Car Tires
- ASTM-F538 - Standard Terminology Relating to the Characteristics and Performance of Tires
- ASTM-F551 - Standard Practice for Using a 1.707-m [67.23-in.] Diameter Laboratory Test Roadwheel in Testing Tires
- ASTM-F554 - Test Method for Wet Cornering Traction of Tires Using Over-The-Road Tire Tester (Withdrawn 1988)
- ASTM-F559 - Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
- ASTM-F586 - Test Method for Leak Rates Versus Y Stresses and M Factors for Gaskets (Withdrawn 1998)
- ASTM-F607 - Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces
- ASTM-F623 - Standard Performance Specification for Foley Catheter
- ASTM-F709 - Specification for Gasket--Asbestos Metallic Cloth Material (Withdrawn 1993)
- ASTM-F724 - Standard Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance
- ASTM-F762 - Standard Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires
- ASTM-F806 - Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
- ASTM-F811 - Standard Practice for Accelerometer Use in Vehicles for Tire Testing
- ASTM-F868 - Standard Classification for Laminated Composite Gasket Materials
- ASTM-F870 - Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements