04.06: Thermal Insulation; Building and Environmental Acoustics
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-C1003 - Test Method for Thermal Performance of Cooling-Air Duct Sections, Using a Calibrated Hot Box (Withdrawn 1997)
- ASTM-C1013 - Specification for Faced Rigid Cellular Polyisocyanurate Roof Insulation (Withdrawn 1997)
- ASTM-C1014 - Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
- ASTM-C1015 - Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
- ASTM-C1029 - Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
- ASTM-C1033 - Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation Installed Vertically
- ASTM-C1041 - Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers (Withdrawn 2019)
- ASTM-C1043 - Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
- ASTM-C1044 - Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
- ASTM-C1045 - Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
- ASTM-C1046 - Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
- ASTM-C1049 - Standard Practice for Installation of Granular Loose-Fill Thermal Insulation (Withdrawn 2001)
- ASTM-C1050 - Standard Specification for Rigid Cellular Polystyrene-Cellulosic Fiber Composite Roof Insulation (Withdrawn 1999)
- ASTM-C1055 - Standard Guide for Heated System Surface Conditions that Produce Contact Burn Injuries
- ASTM-C1057 - Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
- ASTM-C1058 - Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
- ASTM-C1060 - Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
- ASTM-C1061 - Test Method for Thermal Transmission Properties of Non-Homogeneous Insulation Panels Installed Vertically (Withdrawn 1995)
- ASTM-C1071 - Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
- ASTM-C1086 - Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation
- ASTM-C1094 - Standard Guide for Flexible Removable Insulation Covers (Withdrawn 2010)
- ASTM-C1101 - Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
- ASTM-C1104 - Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
- ASTM-C1114 - Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
- ASTM-C1126 - Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
- ASTM-C1129 - Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
- ASTM-C1130 - Standard Practice for Calibration of Thin Heat Flux Transducers
- ASTM-C1132 - Standard Practice for Calibration of the Heat Flow Meter Apparatus (Withdrawn 2002)
- ASTM-C1134 - Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
- ASTM-C1136 - Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
- ASTM-C1139 - Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications (Withdrawn 2019)
- ASTM-C1146 - Standard Guide for Prefabricated Panel and H-bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air (Withdrawn 2024)
- ASTM-C1149 - Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
- ASTM-C1153 - Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
- ASTM-C1155 - Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
- ASTM-C1158 - Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Building Construction
- ASTM-C1199 - Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
- ASTM-C1224 - Standard Specification for Reflective Insulation for Building Applications
- ASTM-C1258 - Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
- ASTM-C1263 - Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
- ASTM-C1289 - Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
- ASTM-C1290 - Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
- ASTM-C1302 - Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards (Withdrawn 2017)
- ASTM-C1303 - Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
- ASTM-C1304 - Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
- ASTM-C1313 - Standard Specification for Sheet Radiant Barriers for Building Construction Applications
- ASTM-C1320 - Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
- ASTM-C1321 - Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
- ASTM-C1335 - Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
- ASTM-C1338 - Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
- ASTM-C1340 - Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
- ASTM-C1363 - Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
- ASTM-C1371 - Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
- ASTM-C1373 - Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
- ASTM-C1374 - Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
- ASTM-C1393 - Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
- ASTM-C1409 - Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
- ASTM-C1410 - Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
- ASTM-C1423 - Standard Guide for Selecting Jacketing Materials for Thermal Insulation
- ASTM-C1427 - Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
- ASTM-C1482 - Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
- ASTM-C1483 - Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
- ASTM-C1484 - Standard Specification for Vacuum Insulation Panels
- ASTM-C1485 - Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
- ASTM-C1487 - Standard Guide for Remedying Structural Silicone Glazing
- ASTM-C1488 - Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation (Withdrawn 2013)
- ASTM-C1497 - Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
- ASTM-C1498 - Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
- ASTM-C1511 - Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type)
- ASTM-C1512 - Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
- ASTM-C1534 - Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
- ASTM-C1549 - Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
- ASTM-C1558 - Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
- ASTM-C1559 - Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)
- ASTM-C1574 - Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
- ASTM-C1594 - Standard Specification for Polyimide Rigid Cellular Thermal Insulation
- ASTM-C1616 - Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
- ASTM-C1617 - Standard Test Method for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Carbon Steel
- ASTM-C163 - Standard Practice for Mixing Thermal Insulating Cement Samples
- ASTM-C1630 - Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
- ASTM-C1631 - Standard Specification for Cellular Polypropylene Thermal Insulation
- ASTM-C1639 - Standard Specification for Fabrication Of Cellular Glass Pipe And Tubing Insulation
- ASTM-C165 - Standard Test Method for Measuring Compressive Properties of Thermal Insulations
- ASTM-C166 - Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
- ASTM-C1667 - Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
- ASTM-C1668 - Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
- ASTM-C167 - Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
- ASTM-C1676 - Standard Specification for Microporous Thermal Insulation
- ASTM-C168 - Standard Terminology Relating to Thermal Insulation
- ASTM-C1685 - Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications
- ASTM-C1695 - Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
- ASTM-C1696 - Standard Guide for Industrial Thermal Insulation Systems
- ASTM-C1699 - Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
- ASTM-C1710 - Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
- ASTM-C1728 - Standard Specification for Flexible Aerogel Insulation
- ASTM-C1729 - Standard Specification for Aluminum Jacketing for Insulation
- ASTM-C1729M - Standard Specification for Aluminum Jacketing for Insulation
- ASTM-C1743 - Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction
- ASTM-C1744 - Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction
- ASTM-C1763 - Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
- ASTM-C1767 - Standard Specification for Stainless Steel Jacketing for Insulation
- ASTM-C1767M - Standard Specification for Stainless Steel Jacketing for Insulation
- ASTM-C177 - Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
- ASTM-C1774 - Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems
- ASTM-C1775 - Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications
- ASTM-C1784 - Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
- ASTM-C1785 - Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
- ASTM-C1794 - Standard Test Methods for Determination of the Water Absorption Coefficient by Partial Immersion
- ASTM-C1809 - Standard Practice for Preparation of Specimens and Reporting of Results for Permeance Testing of Pressure Sensitive Adhesive Sealed Joints in Insulation Vapor Retarders
- ASTM-C1822 - Standard Specification for Insulating Covers on Accessible Lavatory Piping
- ASTM-C1841 - Standard Specification for Interior Radiation Control Coating (IRCC) for Building Applications
- ASTM-C1847 - Standard Specification for Direct Buried Pre-Insulated and Jacketed Polyurethane Bonded Low Temperature Hot Water Piping Systems
- ASTM-C1848 - Standard Practice for Installation of High-Pressure Spray Polyurethane Foam Insulation for the Building Enclosure
- ASTM-C1859 - Standard Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind Netting) for Enclosed Applications of the Building Thermal Envelope
- ASTM-C1864 - Standard Test Method for Determination of Solar Reflectance of Directionally Reflective Material Using Portable Solar Reflectometer
- ASTM-C1878 - Standard Test Method for Surface Water Resistance of Vapor Retarders for Thermal Insulation
- ASTM-C1879 - Standard Practice for Installation of Aluminum and Stainless Steel Jacketing over Thermal Insulation on Pipe and Rigid Tubing
- ASTM-C1902 - Standard Specification for Cellular Glass Insulation Used in Building and Roof Applications
- ASTM-C1916 - Standard Specification for Flexible Protective Jackets Made of Modified Asphalt/Butyl Rubber for Use over Thermal Insulation
- ASTM-C1917 - Standard Specification for Rigid Polyvinyl Chloride (PVC) Jacketing for Insulation
- ASTM-C1918 - Standard Test Method for Water Retention of Rigid Thermal Insulation Materials after Immersion and Exposure to Drying Conditions
- ASTM-C1919 - Standard Practice for Measurement of the Steady-State Thermal Transmission Properties of Small Specimens Using the Heat Flow Meter Apparatus
- ASTM-C1936 - Standard Test Method for Corrosiveness of Mineral-Fiber or Cellulosic-Fiber Insulation by Comparison to Control
- ASTM-C1937 - Standard Specification for Layered, Glass Fiber Felt Pipe and Board Insulation
- ASTM-C195 - Standard Specification for Mineral Fiber Thermal Insulating Cement
- ASTM-C196 - Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
- ASTM-C203 - Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
- ASTM-C208 - Standard Specification for Cellulosic Fiber Insulating Board
- ASTM-C209 - Standard Test Methods for Cellulosic Fiber Insulating Board
- ASTM-C236 - Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box (Withdrawn 2001)
- ASTM-C240 - Standard Test Methods for Testing Cellular Glass Insulation Block
- ASTM-C302 - Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
- ASTM-C303 - Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation
- ASTM-C335 - Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
- ASTM-C351 - Standard Test Method for Mean Specific Heat of Thermal Insulation (Withdrawn 2008)
- ASTM-C353 - Standard Test Method for Adhesion of Dried Thermal Insulating or Finishing Cement (Withdrawn 2002)
- ASTM-C354 - Standard Test Method for Compressive Strength of Thermal Insulating or Finishing Cement (Withdrawn 2002)
- ASTM-C356 - Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
- ASTM-C367 - Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
- ASTM-C383 - Standard Test Method for Wet Adhesion of Thermal Insulating Cements to Metal (Withdrawn 2002)
- ASTM-C384 - Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
- ASTM-C390 - Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
- ASTM-C405 - Standard Practice for Estimating Consistency of Wet-Mixed Thermal Insulating Cement (Withdrawn 2006)
- ASTM-C411 - Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
- ASTM-C419 - Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
- ASTM-C421 - Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
- ASTM-C423 - Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
- ASTM-C446 - Standard Test Method for Breaking Load and Calculated Modulus of Rupture of Preformed Insulation for Pipes (Withdrawn 2002)
- ASTM-C447 - Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
- ASTM-C449 - Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
- ASTM-C450 - Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
- ASTM-C461 - Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
- ASTM-C464 - Method of Test for Corrosion Effect of Thermal Insulating Cements on Base Metal (Withdrawn 1988)
- ASTM-C488 - Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
- ASTM-C516 - Standard Specification for Vermiculite Loose Fill Thermal Insulation
- ASTM-C517 - Specification for Diatomaceous Earth Block and Pipe Thermal Insulation (Withdrawn 1988)
- ASTM-C518 - Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM-C519 - Test Method for Density of Fibrous Loose Fill Building Insulations (Withdrawn 1995)
- ASTM-C520 - Standard Test Methods for Density of Granular Loose Fill Insulations
- ASTM-C522 - Standard Test Method for Airflow Resistance of Acoustical Materials
- ASTM-C532 - Specification for Structural Insulating Formboard (Cellulosic Fiber) (Withdrawn 1992)
- ASTM-C533 - Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
- ASTM-C534 - Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
- ASTM-C547 - Standard Specification for Mineral Fiber Pipe Insulation
- ASTM-C549 - Standard Specification for Perlite Loose Fill Insulation
- ASTM-C550 - Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
- ASTM-C552 - Standard Specification for Cellular Glass Thermal Insulation
- ASTM-C553 - Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
- ASTM-C569 - Method of Test for Indentation Hardness of Preformed Thermal Insulations (Withdrawn 1988)
- ASTM-C578 - Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ASTM-C585 - Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
- ASTM-C590 - Method of Test for Action on Substrates by Coatings, Adhesives and Joint Sealens Used On or With Thermal Insulations
- ASTM-C591 - Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
- ASTM-C592 - Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
- ASTM-C610 - Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
- ASTM-C612 - Standard Specification for Mineral Fiber Block and Board Thermal Insulation
- ASTM-C634 - Standard Terminology Relating to Building and Environmental Acoustics
- ASTM-C635 - Standard Specification for Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
- ASTM-C636 - Standard Practice for Installation of Metal Ceiling Suspension Systems for
Acoustical Tile and Lay-In Panels - ASTM-C640 - Specification for Corkboard and Cork Pipe Thermal Insulation (Withdrawn 1994)
- ASTM-C647 - Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
- ASTM-C653 - Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
- ASTM-C656 - Standard Specification for Structural Insulating Board, Calcium Silicate
- ASTM-C665 - Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
- ASTM-C667 - Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
- ASTM-C677 - Practice for Use of a Polyethylene Terephthalate Reference Film for the Measurement of the Time-Averaged Vapor Pressure in a Controlled Humidity Space (Withdrawn 1990)
- ASTM-C680 - Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
- ASTM-C686 - Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
- ASTM-C687 - Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
- ASTM-C691 - Test Method for Steady-State Thermal Transmission Properties of Nonhomogeneous Pipe Insulation Installed Horizontally (Withdrawn 1986)
- ASTM-C692 - Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
- ASTM-C720 - Specification for Spray-Applied Fibrous Thermal Insulation for Elevated Temperature (Withdrawn 1999)
- ASTM-C726 - Standard Specification for Mineral Wool Roof Insulation Board
- ASTM-C727 - Standard Practice for Installation and Use of Reflective Insulation in Building Constructions
- ASTM-C728 - Standard Specification for Perlite Thermal Insulation Board
- ASTM-C739 - Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
- ASTM-C740 - Standard Guide for Evacuated Reflective Insulation In Cryogenic Service
- ASTM-C745 - Standard Test Method for Heat Flux Through Evacuated Insulations Using a Guarded Flat Plate Boiloff Calorimeter (Withdrawn 2008)
- ASTM-C755 - Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
- ASTM-C762 - Practice for Application of Spray-Applied Fibrous Thermal Insulation for Elevated Temperatures (Withdrawn 1999)
- ASTM-C764 - Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
- ASTM-C795 - Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
- ASTM-C800 - Standard Specification for Fibrous Glass Blanket Insulation (Aircraft Type)
- ASTM-C835 - Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C
- ASTM-C846 - Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
- ASTM-C854 - Test Method for Resistance to External Loads on Metal Reflective Pipe Insulation (Withdrawn 1997)
- ASTM-C855 - Thermal Resistance Factors for Preformed Above-Deck Roof Insulation (Withdrawn 1983)
- ASTM-C870 - Standard Practice for Conditioning of Thermal Insulating Materials
- ASTM-C871 - Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
- ASTM-C892 - Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
- ASTM-C916 - Standard Specification for Adhesives for Duct Thermal Insulation
- ASTM-C921 - Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation (Withdrawn 2021)
- ASTM-C929 - Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
- ASTM-C930 - Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
- ASTM-C945 - Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
- ASTM-C950 - Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
- ASTM-C951 - Specification for Urea-Formaldehyde-Based, Foamed in Place Insulation (Withdrawn 1985)
- ASTM-C971 - Guide for Selection and Application of Insulation Systems for Heating, Ventilating, and Air Conditioning Duct Work (Withdrawn 1997)
- ASTM-C976 - Standard Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box (Withdrawn 2002)
- ASTM-C984 - Specification for Perlite Board and Rigid Cellular Polyisocyanurate Composite Roof Insulation (Withdrawn 1997)
- ASTM-C991 - Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
- ASTM-E1007 - Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
- ASTM-E1014 - Standard Guide for Measurement of Outdoor A-Weighted Sound Levels
- ASTM-E1041 - Standard Guide for Measurement of Masking Sound in Open Offices (Withdrawn 2002)
- ASTM-E1042 - Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray
- ASTM-E1050 - Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System
- ASTM-E1110 - Standard Classification for Determination of Articulation Class
- ASTM-E1111 - Standard Test Method for Measuring the Interzone Attenuation of Open Office Components
- ASTM-E1123 - Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials
- ASTM-E1124 - Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
- ASTM-E1130 - Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
- ASTM-E1179 - Standard Specification for Sound Sources Used for Testing Open Office Components and Systems
- ASTM-E1222 - Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
- ASTM-E1264 - Standard Classification for Acoustical Ceiling Products
- ASTM-E1265 - Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers
- ASTM-E1289 - Standard Specification for Reference Specimen for Sound Transmission Loss
- ASTM-E1332 - Standard Classification for Rating Outdoor-Indoor Sound Attenuation
- ASTM-E1374 - Standard Guide for Office Acoustics and Applicable ASTM Standards
- ASTM-E1375 - Standard Test Method for Measuring the Interzone Attenuation of Furniture Panels Used as Acoustical Barriers
- ASTM-E1376 - Standard Test Method for Measuring the Interzone Attenuation of Sound Reflected by Wall Finishes and Furniture Panels
- ASTM-E1408 - Standard Test Method for Laboratory Measurement of the Sound Transmission Loss of Door Panels and Door Systems (Withdrawn 2009)
- ASTM-E1414 - Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
- ASTM-E1433 - Standard Guide for Selection of Standards on Environmental Acoustics (Withdrawn 2010)
- ASTM-E1503 - Standard Test Method for Conducting Outdoor Sound Measurements Using a Statistical Sound Analysis System
- ASTM-E1573 - Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels
- ASTM-E1574 - Standard Test Method for Measurement of Sound in Residential Spaces
- ASTM-E1686 - Standard Guide for Applying Environmental Noise Measurement Methods and Criteria
- ASTM-E1704 - Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
- ASTM-E1779 - Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements (Withdrawn 2012)
- ASTM-E1780 - Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source
- ASTM-E2179 - Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
- ASTM-E2202 - Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
- ASTM-E2235 - Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
- ASTM-E2249 - Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity
- ASTM-E2459 - Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
- ASTM-E2611 - Standard Test Method for Normal Incidence Determination of Porous Material Acoustical Properties Based on the Transfer Matrix Method
- ASTM-E2638 - Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room
- ASTM-E2963 - Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments
- ASTM-E2964 - Standard Test Method for Measurement of the Normalized Insertion Loss of Doors
- ASTM-E3090 - Standard Test Methods for Strength Properties of Metal Ceiling Suspension Systems
- ASTM-E3091 - Standard Specification for Systems to Measure Sound Levels
- ASTM-E3133 - Standard Test Method for Laboratory Measurement of Floor Impact Sound Radiation Using the Tapping Machine
- ASTM-E3207 - Standard Classification for Determination of Low-Frequency Impact Noise Ratings
- ASTM-E3222 - Standard Classification for Determination of High-frequency Impact Sound Ratings
- ASTM-E3359 - Standard Practice for Measurement of Sound Pressure Level Differences and Decay Curves Using the Impulse Response Method with Swept Sinusoidal Signals
- ASTM-E336 - Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
- ASTM-E413 - Classification for Rating Sound Insulation
- ASTM-E477 - Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
- ASTM-E492 - Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
- ASTM-E497 - Standard Practice for Installing Sound-Isolating Lightweight Partitions (Withdrawn 2008)
- ASTM-E557 - Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions
- ASTM-E580 - Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
- ASTM-E596 - Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
- ASTM-E597 - Practice for Determining A Single-Number Rating of Airborne Sound Isolation for Use in Multiunit Building Specifications (Withdrawn 1999)
- ASTM-E717 - Standard Guide for Preparation of the Accreditation Annex of Acoustical Test Standards (Withdrawn 2008)
- ASTM-E756 - Standard Test Method for Measuring Vibration-Damping Properties of Materials
- ASTM-E795 - Standard Practices for Mounting Test Specimens During Sound Absorption Tests
- ASTM-E90 - Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
- ASTM-E96 - Standard Test Methods for Water Vapor Transmission of Materials
- ASTM-E966 - Standard Guide for Field Measurements of Airborne Sound Attenuation of Building Facades and Facade Elements
- ASTM-E989 - Standard Classification for Determination of Single-Number Metrics for Impact Noise