05.03: Petroleum Products and Lubricants (III): D6138 - D6971
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-D4173 - Practice for Sheet Metal Forming Lubricant Evaluation (Withdrawn 1991)
- ASTM-D4736 - Test Method For Evaluating Friction Retention Characteristics Of Oils Used In Oil Cooled Bronze Faced Friction Clutches (Withdrawn 1995)
- ASTM-D4931 - Standard Test Method for Gross Moisture in Green Petroleum Coke
- ASTM-D4950 - Standard Classification and Specification for Automotive Service Greases
- ASTM-D4951 - Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
- ASTM-D5000 - Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor (Withdrawn 2014)
- ASTM-D5001 - Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
- ASTM-D5006 - Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
- ASTM-D5119 - Standard Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine (Withdrawn 2003)
- ASTM-D5182 - Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
- ASTM-D5184 - Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
- ASTM-D5185 - Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- ASTM-D5189 - Test Method for Temperature Corresponding to Vapor-Liquid Ratio of 20 for Gasoline and Gasoline-Oxgenate Blends (Bomb Method) (Withdrawn 1993)
- ASTM-D5190 - Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method) (Withdrawn 2012)
- ASTM-D5191 - Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
- ASTM-D5274 - Standard Guide for Analysis of 1,3–Butadiene Product
- ASTM-D5290 - Standard Test Method for Measurement of Oil Consumption, Piston Deposits and Wear in a Heavy-Duty High Speed Diesel Engine-NTC-400 Procedure (Withdrawn 1997)
- ASTM-D5291 - Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM-D5294 - Standard Test Method for Determination of Beta Resins (BR) in Pitch (Withdrawn 1997
- ASTM-D5302 - Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions (Withdrawn 2003)
- ASTM-D5480 - Standard Test Method for Engine Oil Volatility by Gas Chromatography (Withdrawn 2003)
- ASTM-D5844 - Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (Sequence IID) (Withdrawn 2003)
- ASTM-D5862 - Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine (Withdrawn 2009)
- ASTM-D6138 - Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
- ASTM-D6139 - Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask
- ASTM-D6158 - Standard Specification for Mineral Hydraulic Oils
- ASTM-D6159 - Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography
- ASTM-D6160 - Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography
- ASTM-D6184 - Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)
- ASTM-D6185 - Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
- ASTM-D6186 - Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
- ASTM-D6200 - Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
- ASTM-D6201 - Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
- ASTM-D6202 - Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine (Withdrawn 2009)
- ASTM-D6203 - Standard Test Method for Thermal Stability of Way Lubricants
- ASTM-D6217 - Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
- ASTM-D6224 - Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
- ASTM-D6227 - Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
- ASTM-D6258 - Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
- ASTM-D6259 - Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method
- ASTM-D6277 - Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
- ASTM-D6278 - Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus
- ASTM-D6293 - Standard Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic (O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels by Gas Chromatography (Withdrawn 2009)
- ASTM-D6296 - Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography
- ASTM-D6299 - Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
- ASTM-D6300 - Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
- ASTM-D6304 - Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
- ASTM-D6334 - Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence (Withdrawn 2022)
- ASTM-D6335 - Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
- ASTM-D6351 - Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
- ASTM-D6352 - Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
- ASTM-D6353 - Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
- ASTM-D6354 - Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
- ASTM-D6371 - Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
- ASTM-D6374 - Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure
- ASTM-D6375 - Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
- ASTM-D6376 - Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy
- ASTM-D6377 - Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCR
x (Expansion Method) - ASTM-D6378 - Standard Test Method for Determination of Vapor Pressure (VP
X ) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method) - ASTM-D6379 - Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
- ASTM-D6384 - Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants
- ASTM-D6417 - Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography
- ASTM-D6421 - Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
- ASTM-D6422 - Standard Test Method for Water Tolerance (Phase Separation) of Gasoline-Alcohol Blends (Withdrawn 2007)
- ASTM-D6423 - Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends
- ASTM-D6424 - Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines
- ASTM-D6425 - Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
- ASTM-D6426 - Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
- ASTM-D6439 - Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
- ASTM-D6443 - Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
- ASTM-D6445 - Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry (Withdrawn 2009)
- ASTM-D6446 - Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels (Withdrawn 2012)
- ASTM-D6447 - Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
- ASTM-D6448 - Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
- ASTM-D6450 - Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
- ASTM-D6468 - Standard Test Method for High Temperature Stability of Middle Distillate Fuels
- ASTM-D6469 - Standard Guide for Microbial Contamination in Fuels and Fuel Systems
- ASTM-D6470 - Standard Test Method for Salt in Crude Oils (Potentiometric Method)
- ASTM-D6481 - Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
- ASTM-D6482 - Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
- ASTM-D6483 - Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009)
- ASTM-D6514 - Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
- ASTM-D6546 - Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
- ASTM-D6547 - Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple
- ASTM-D6549 - Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
- ASTM-D6550 - Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
- ASTM-D6553 - Standard Test Method for Coolant Compatibility of Way Lubricants
- ASTM-D6557 - Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
- ASTM-D6558 - Standard Test Method for Determination of TGA CO
2 Reactivity of Baked Carbon Anodes and Cathode Blocks - ASTM-D6559 - Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
- ASTM-D6560 - Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
- ASTM-D6584 - Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
- ASTM-D6591 - Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
- ASTM-D6593 - Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
- ASTM-D6594 - Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135 °C
- ASTM-D6595 - Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
- ASTM-D6596 - Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials
- ASTM-D6615 - Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
- ASTM-D6616 - Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C
- ASTM-D6617 - Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
- ASTM-D6618 - Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
- ASTM-D6624 - Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
- ASTM-D6666 - Standard Guide for Evaluation of Aqueous Polymer Quenchants
- ASTM-D6667 - Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM-D6668 - Standard Test Method for Discrimination Between Flammability Ratings of F = 0
and F = 1 - ASTM-D6681 - Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
- ASTM-D6708 - Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
- ASTM-D6709 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
- ASTM-D6710 - Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil
- ASTM-D6728 - Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
- ASTM-D6729 - Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
- ASTM-D6730 - Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
- ASTM-D6731 - Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer
- ASTM-D6732 - Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
- ASTM-D6733 - Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
- ASTM-D6743 - Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
- ASTM-D6744 - Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
- ASTM-D6745 - Standard Test Method for Linear Thermal Expansion of Electrode Carbons
- ASTM-D6748 - Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
- ASTM-D6749 - Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
- ASTM-D6750 - Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
- ASTM-D6751 - Standard Specification for Biodiesel Fuel Blendstock (B100) for Middle Distillate Fuels
- ASTM-D6756 - Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
- ASTM-D6791 - Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
- ASTM-D6792 - Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM-D6793 - Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus (Withdrawn 2021)
- ASTM-D6794 - Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time
- ASTM-D6795 - Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time
- ASTM-D6810 - Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
- ASTM-D6811 - Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method) (Withdrawn 2013)
- ASTM-D6812 - Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines
- ASTM-D6813 - Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015)
- ASTM-D6821 - Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
- ASTM-D6822 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
- ASTM-D6823 - Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
- ASTM-D6824 - Standard Test Method for Determining Filterability of Aviation Turbine Fuel
- ASTM-D6837 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine
(Withdrawn 2022) - ASTM-D6838 - Standard Test Method for Cummins M11 High Soot Test (Withdrawn 2019)
- ASTM-D6839 - Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, and Benzene in Spark Ignition Engine Fuels by Gas Chromatography
- ASTM-D6849 - Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
- ASTM-D6891 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
- ASTM-D6892 - Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
- ASTM-D6894 - Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine (Withdrawn 2022)
- ASTM-D6895 - Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100 °C
- ASTM-D6896 - Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
- ASTM-D6897 - Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
- ASTM-D6898 - Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig (Withdrawn 2021)
- ASTM-D6920 - Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection (Withdrawn 2018)
- ASTM-D6922 - Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
- ASTM-D6923 - Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
- ASTM-D6969 - Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
- ASTM-D6970 - Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
- ASTM-D6971 - Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
- ASTM-D6984 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
- ASTM-D6987 - Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine (Withdrawn 2022)
- ASTM-D7038 - Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
- ASTM-D7039 - Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
- ASTM-D7041 - Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection
- ASTM-D7042 - Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM-D7043 - Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
- ASTM-D7044 - Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids (Withdrawn 2024)
- ASTM-D7059 - Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
- ASTM-D7061 - Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
- ASTM-D7094 - Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
- ASTM-D7095 - Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
- ASTM-D7098 - Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
- ASTM-D7109 - Standard Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus at 30 Cycles and 90 Cycles
- ASTM-D7110 - Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM-D7111 - Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- ASTM-D7112 - Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
- ASTM-D7152 - Standard Practice for Calculating Viscosity of a Blend of Petroleum Products
- ASTM-D7153 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
- ASTM-D7154 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
- ASTM-D7156 - Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
- ASTM-D7157 - Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (
n -Heptane Phase Separation; Optical Detection) - ASTM-D7169 - Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
- ASTM-D7212 - Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter (Withdrawn 2024)
- ASTM-D7213 - Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
- ASTM-D7214 - Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM-D7215 - Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
- ASTM-D7216 - Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
- ASTM-D7217 - Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM-D7220 - Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
- ASTM-D7224 - Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
- ASTM-D7235 - Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
- ASTM-D7236 - Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
- ASTM-D7261 - Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
- ASTM-D7278 - Standard Guide for Prediction of Analyzer Sample System Lag Times
- ASTM-D7279 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
- ASTM-D7303 - Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
- ASTM-D7317 - Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
- ASTM-D7318 - Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
- ASTM-D7319 - Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
- ASTM-D7320 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
- ASTM-D7321 - Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
- ASTM-D7328 - Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
- ASTM-D7345 - Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
- ASTM-D7346 - Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels
- ASTM-D7347 - Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography (Withdrawn 2024)
- ASTM-D7371 - Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
- ASTM-D7372 - Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
- ASTM-D7397 - Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)
- ASTM-D7398 - Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
- ASTM-ES19 - Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration (Withdrawn 1994)