Document Center List of Standards on Application Of Statistical Methods
ICS Code 03.120.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D6299 - Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
- ASTM-D7915 - Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set
- ASTM-E122 - Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
- ASTM-E141 - Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
- ASTM-E178 - Standard Practice for Dealing With Outlying Observations
- ASTM-E1847 - Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines (Withdrawn 2022)
- ASTM-E1849 - Standard Guide for Fish and Wildlife Incident Monitoring and Reporting (Withdrawn 2022)
- ASTM-E1970 - Standard Practice for Statistical Treatment of Thermoanalytical Data
- ASTM-E1994 - Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
- ASTM-E2093 - Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
- ASTM-E2334 - Standard Practice for Setting an Upper Confidence Bound for a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-Conformities, Using Attribute Data, When There is a Zero Response in the Sample
- ASTM-E2586 - Standard Practice for Calculating and Using Basic Statistics
- ASTM-E2587 - Standard Practice for Use of Control Charts in Statistical Process Control
- ASTM-E2709 - Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
- ASTM-E2810 - Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units
- ASTM-E2819 - Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL
- ASTM-E2862 - Standard Practice for Probability of Detection Analysis for Hit/Miss Data
- ASTM-E2935 - Standard Practice for Evaluating Equivalence of Two Testing Processes
- ASTM-E3041 - Standard Guide for Selecting and Using Scales for Sensory Evaluation
- ASTM-E3080 - Standard Practice for Regression Analysis with a Single Predictor Variable
- ASTM-F663 - Practice for Manual Analysis of Interferometric Data by Least-Squares Fitting to a Plane Reference Surface
- ASTM-F664 - Practice for Manual Analysis of Interferometric Data by Least-Squares Fitting to a Spherical Reference Surface and for Computer-Aided Analysis of Interferometric Data by Least-Squares Fitting to Both Plane and Spherical Reference Surfa (Withdrawn 1994)
- ASTM-G172 - Standard Guide for Statistical Analysis of Accelerated Service Life Data
BSI:
- BIP-2011 - IMS: Continual improvement through auditing. Integrated management systems series
- BS-2564 - Control Chart Technique When Manufacturing To a Specification, With Special Reference
- BS-2846-1 - Guide to statistical interpretation of data
- BS-2846-2 - Guide to statistical interpretation of data
- BS-2846-3 - Guide To Statistical Interpretation of Data, Determination of a Statistical Tolerance
- BS-2846-4 - Guide to statistical interpretation of data
- BS-2846-5 - Guide to statistical interpretation of data
- BS-2846-6 - Guide to statistical interpretation of data
- BS-2846-7 - Guide to statistical interpretation of data
- BS-2846-8 - Guide to statistical interpretation of data
- BS-2987 - Notes on the application of statistics to paper testing
- BS-5700 - Guide to the selection of charting methods and capability assessment for use in statistical process control
- BS-5700-TC - Tracked Changes. Guide to the selection of charting methods and capability assessment for use in statistical process control
- BS-5701 - Guide To Number-Defective Charts for Quality Control
- BS-5701-1 - Guide to quality control and performance improvement using qualitative (attribute) data
- BS-5701-2 - Guide to quality control and performance improvement using qualitative (attribute) data
- BS-5701-3 - Guide to quality control and performance improvement using qualitative (attribute) data
- BS-5701-4 - Guide to quality control and performance improvement using qualitative (attribute) data
- BS-5702-1 - Guide to statistical process control (SPC) charts for variables
- BS-5702-2 - Guide to statistical process control (SPC) charts for variables
- BS-5702-3 - Guide to statistical process control (SPC) charts for variables
- BS-5703-1 - Guide to data analysis and quality control using cusum techniques
- BS-5703-2 - Guide to data analysis and quality control using cusum techniques
- BS-5703-3 - Guide to data analysis and quality control using cusum techniques
- BS-5703-4 - Guide To Data Analysis & Quality Control Using Cusum Techniques, Cusum Methods for Dis
- BS-600 - A guide to the application of statistical methods to quality and standardization
- BS-6000 - Guide for the Selection of an Acceptance Sampling System, Scheme or Plan for Inspectio
- BS-6000-1 - Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots
- BS-6000-2 - Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots
- BS-6000-3 - Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots
- BS-6001-0 - Sampling procedures for inspection by attributes. Introduction to the BS 6001 (ISO 2859) series of standards for sampling for inspection by attributes
- BS-6001-1 - Sampling procedures for inspection by attributes
- BS-6001-3 - Sampling procedures for inspection by attributes
- BS-6001-4 - Sampling procedures for inspection by attributes
- BS-6001-5 - Sampling procedures for inspection by attributes
- BS-6001-7 - Acceptance sampling procedures for inspection by attributes. Accept-zero sampling system based on credit principle for controlling outgoing quality
- BS-6001-9 - Part 9: Double Sampling Plans Using Minimal Sample Sizes, Indexed by Producer's Risk Quali
- BS-6002-1 - Sampling procedures for inspection by variables
- BS-6002-2 - Sampling procedures for inspection by variables
- BS-6002-3 - Sampling procedures for inspection by variables
- BS-6002-4 - Sampling procedures for inspection by variables
- BS-7782 - Control charts. General guide and introduction
- BS-7783 - Acceptance control charts
- BS-7785 - Shewhart control charts
- BS-8496 - Water quality. Enumeration of micro-organisms in water samples. Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty of measurement
- BS-EN-100014 - Harmonized system of quality assessment for electronic components. Basic specification: CECC assessed process average procedure (60% confidence limit)
- BS-EN-12603 - Glass in building. Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
- BS-EN-60300-3-12 - Dependability management
- BS-EN-60706-5 - Maintainability of equipment
- BS-EN-60812 - Analysis techniques for system reliability. Procedure for failure mode and effects analysis (FMEA)
- BS-EN-61124 - Reliability testing. Compliance tests for constant failure rate and constant failure intensity
- BS-EN-61163-1 - Reliability stress screening
- BS-EN-61165 - Application of Markov techniques
- BS-EN-61649 - Weibull analysis
- BS-EN-61703 - Mathematical expressions for reliability, availability, maintainability and maintenance support terms
- BS-EN-61703-TC - Tracked Changes. Mathematical expressions for reliability, availability, maintainability and maintenance support terms
- BS-EN-61710 - Power law model. Goodness-of-fit tests and estimation methods
- BS-EN-62309 - Dependability of products containing reused parts. Requriements for functionality and tests
- BS-EN-IEC-60812 - Failure modes and effects analysis (FMEA and FMECA)
- BS-EN-IEC-60812-TC - Tracked Changes. Failure modes and effects analysis (FMEA and FMECA)
- BS-EN-IEC-61123 - Reliability testing. Compliance test plans for success ratio
- BS-EN-IEC-61124 - Reliability testing. Compliance tests for constant failure rate and constant failure intensity
- BS-EN-IEC-61754-13 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
- BS-IEC-60605-6 - Equipment reliability testing
- BS-IEC-61124 - Reliability testing. Compliance tests for constant failure rate and constant failure intensity
- BS-IEC-61649 - Procedures for Goodness-Of-Fit Tests, Confidence Intervals & Lower Confidence Limits F
- BS-IEC-61710 - Power law model. Goodness-of-fit tests and estimation methods
- BS-ISO-10017 - Quality management. Guidance on statistical techniques for ISO 9001:2015
- BS-ISO-10017-TC - Tracked Changes. Quality management. Guidance on statistical techniques for ISO 9001:2015
- BS-ISO-10576 - Statistical methods. Guidelines for the evaluation of conformity with specified requirements
- BS-ISO-10725 - Acceptance sampling plans and procedures for the inspection of bulk materials
- BS-ISO-11648-2 - Statistical aspects of sampling from bulk materials
- BS-ISO-11843-1 - Capability of detection
- BS-ISO-11843-2 - Capability of detection
- BS-ISO-11843-5 - Capability of detection
- BS-ISO-11843-6 - Capability of detection
- BS-ISO-11843-7 - Capability of detection
- BS-ISO-11843-7-TC - Tracked Changes. Capability of detection
- BS-ISO-13053-1 - Quantitative methods in process improvement. Six Sigma
- BS-ISO-13053-2 - Quantitative methods in process improvement. Six Sigma
- BS-ISO-13448-1 - Acceptance sampling procedures based on the allocation of priorities principle (APP)
- BS-ISO-13448-2 - Acceptance sampling procedures based on the allocation of priorities principles (APP)
- BS-ISO-13528 - Statistical methods for use in proficiency testing by interlaboratory comparison
- BS-ISO-13528-TC - Tracked Changes. Statistical methods for use in proficiency testing by interlaboratory comparison
- BS-ISO-14560 - Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million
- BS-ISO-16269-6 - Statistical interpretation of data
- BS-ISO-16336 - Applications of statistical and related methods to new technology and product development process. Robust parameter design (RPD)
- BS-ISO-16337 - Application of statistical and related methods to new technology and product development process. Robust tolerance design (RTD)
- BS-ISO-16355-1 - Application of statistical and related methods to new technology and product development process
- BS-ISO-16355-1-TC - Tracked Changes. Application of statistical and related methods to new technology and product development process
- BS-ISO-16355-3 - Applications of statistical and related methods to new technology and product development process
- BS-ISO-16355-4 - Applications of statistical and related methods to new technology and product development process
- BS-ISO-16355-5 - Applications of statistical and related methods to new technology and product development process
- BS-ISO-17258 - Statistical methods. Six Sigma. Basic criteria underlying benchmarking for Six Sigma in organisations
- BS-ISO-18404 - Quantitative methods in process improvement. Six Sigma. Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation
- BS-ISO-21247 - Combined accept-zero sampling systems and process control procedures for product acceptance
- BS-ISO-21747 - Statistical methods. Process performance and capability statistics for measured quality characteristics
- BS-ISO-22514-1 - Statistical methods in process management. Capability and performance
- BS-ISO-22514-2 - Statistical methods in process management. Capability and performance
- BS-ISO-22514-3 - Statistical methods in process management. Capability and performance
- BS-ISO-22514-4 - Statistical methods in process management. Capability and performance
- BS-ISO-22514-4-TC - Tracked Changes. Statistical methods in process management. Capability and performance
- BS-ISO-22514-5 - Statistical methods in process management. Capability and performance
- BS-ISO-22514-6 - Statistical methods in process management. Capability and performance
- BS-ISO-22514-7 - Statistical methods in process management. Capability and performance
- BS-ISO-22514-7-TC - Tracked Changes. Statistical methods in process management. Capability and performance
- BS-ISO-22514-8 - Statistical methods in process management. Capability and performance
- BS-ISO-24153 - Random sampling and randomization procedures
- BS-ISO-28590 - Sampling procedures for inspection by attributes. Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
- BS-ISO-28591 - Sequential sampling plans for inspection by attributes
- BS-ISO-28591-TC - Tracked Changes. Sequential sampling plans for inspection by attributes
- BS-ISO-28592 - Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
- BS-ISO-28592-TC - Tracked Changes. Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
- BS-ISO-28593 - Acceptance sampling procedures by attributes. Accept-zero sampling system based on credit principle for controlling outgoing quality
- BS-ISO-28594 - Combined accept-zero sampling systems and process control procedures for product acceptance
- BS-ISO-2859-4 - Sampling procedures for inspection by attributes
- BS-ISO-28594-TC - Tracked Changes. Combined accept-zero sampling systems and process control procedures for product acceptance
- BS-ISO-28596 - Sampling procedures for inspection by attributes. Two-stage sampling plans for auditing and for inspection under prior information
- BS-ISO-28597 - Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million
- BS-ISO-28597-TC - Tracked Changes. Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million
- BS-ISO-28598-1 - Acceptance sampling procedures based on the allocation of priorities principle (APP)
- BS-ISO-28598-1-TC - Tracked Changes. Acceptance sampling procedures based on the allocation of priorities principle (APP)
- BS-ISO-28598-2 - Acceptance sampling procedures based on the allocation of priorities principle (APP)
- BS-ISO-28598-2-TC - Tracked Changes. Acceptance sampling procedures based on the allocation of priorities principle (APP)
- BS-ISO-28640 - Random variate generation methods
- BS-ISO-28801 - Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
- BS-ISO-3534-1 - Statistics. Vocabulary and symbols
- BS-ISO-3534-2 - Statistics. Vocabulary and symbols
- BS-ISO-3534-3 - Statistics. Vocabulary and symbols
- BS-ISO-3534-4 - Statistics. Vocabulary and symbols
- BS-ISO-39511 - Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
- BS-ISO-3951-1 - Sampling procedures for inspection by variables
- BS-ISO-39511-TC - Tracked Changes. Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
- BS-ISO-3951-2 - Sampling procedures for inspection by variables
- BS-ISO-3951-4 - Sampling procedures for inspection by variables
- BS-ISO-39515-1 - Sampling procedures for inspection by variables
- BS-ISO-3951-6 - Sampling procedures for inspection by variables
- BS-ISO-5725-2 - Accuracy (trueness and precision) of measurement methods and results
- BS-ISO-5725-3-TC - Tracked Changes. Accuracy (trueness and precision) of measurement methods and results
- BS-ISO-7870-1 - Control charts
- BS-ISO-7870-2 - Control charts
- BS-ISO-7870-2-TC - Tracked Changes. Control charts
- BS-ISO-7870-3 - Control charts
- BS-ISO-7870-4 - Control charts
- BS-ISO-7870-4-TC - Tracked Changes. Control charts
- BS-ISO-7870-5 - Control charts
- BS-ISO-7870-6 - Control charts
- BS-ISO-7870-7 - Control charts
- BS-ISO-7870-8 - Control charts
- BS-ISO-7870-9 - Control charts
- BS-ISO-8422 - Sequential sampling plans for inspection by attributes
- BS-ISO-8423 - Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
- CWA-14167-1 - Security Requirements for Trustworthy Systems Managing Certificates for Electronic Sig
- CWA-14729-1 - Intrastat System, the Implementation Model
- CWA-14729-2 - Intrastat System, Message Implementation Guideline of Instat/Xml
- CWA-14729-3 - Intrastat System, Message Implementation Guideline of Insres/Xml
- DD-260 - Water quality. Enumeration of micro-organisms in water samples. Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty of measurement
- DD-ISO-28037 - Determination and use of straight-line calibration functions
- KIT-201 - Guide To Statistical Process Control (Spc) Charts for Variables
- PD-6532-2 - Reference materials. Guide to the contents of certificates of reference materials
- PD-CEN-16369 - Use of control charts in the production of concrete
- PD-CEN-16886 - Guidance on the application of statistical methods for determining the properties of masonry products
- PD-IEC-63039 - Probabilistic risk analysis of technological systems. Estimation of final event rate at a given initial state
- PD-ISO-11462-3 - Guidelines for implementation of statistical process control (SPC)
- PD-ISO-11462-4 - Guidelines for implementation of statistical process control (SPC)
- PD-ISO-11462-5 - Guidelines for implementation of statistical process control (SPC)
- PD-ISO-12888 - Selected illustrations of gauge repeatability and reproducibility studies
- PD-ISO-13195 - Selected illustrations of response surface method. Central composite design
- PD-ISO-13519 - Guidance on the development and use of ISO statistical publications supported by software
- PD-ISO-13587 - Three statistical approaches for the assessment and interpretation of measurement uncertainty
- PD-ISO-16355-8 - Applications of statistical and related methods to new technology and product development process
- PD-ISO-16705 - Statistical methods for implementation of Six Sigma. Selected illustrations of contingency table analysis
- PD-ISO-20693 - Statistical methods for implementation of Six Sigma. Selected illustrations of distribution identification studies
- PD-ISO-22514-4 - Statistical methods in process management. Capability and performance
- PD-ISO-22514-9 - Statistical methods in process management. Capability and performance
- PD-ISO-22914 - Statistical methods for implementation of Six Sigma. Selected illustration of analysis of variance
- PD-ISO-22971 - Accuracy (trueness and precision) of measurement methods and results. Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
- PD-ISO-27877 - Statistical analysis for evaluating the precision of binary measurement methods and their results
- PD-ISO-27878 - Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
- PD-ISO-29901 - Selected illustrations of full factorial experiments with four factors
IEC:
- IEC-60300-3-1 - Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology
- IEC-60300-3-12 - Dependability management - Part 3-12: Application guide - Integrated logistic support
- IEC-60605-4 - Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals
- IEC-60605-6 - Equipment reliability testing - Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity
- IEC-60706-5 - Maintainability of equipment - Part 5: Testability and diagnostic testing
- IEC-60812 - Failure modes and effects analysis (FMEA and FMECA)
- IEC-61124 - Reliability testing - Compliance tests for constant failure rate and constant failure intensity
- IEC-61163-1 - Reliability stress screening - Part 1: Repairable assemblies manufactured in lots
- IEC-61164 - Reliability growth - Statistical test and estimation methods
- IEC-61165 - Application of Markov techniques
- IEC-61649 - Weibull analysis
- IEC-61650 - Reliability data analysis techniques - Procedures for comparison of two constant failure rates and two constant failure (event) intensities
- IEC-61703 - Mathematical expressions for reliability, availability, maintainability and maintenance support terms
- IEC-61710 - Power law model - Goodness-of-fit tests and estimation methods
- IEC-62309 - Dependability of products containing reused parts - Requirements for functionality and tests
- IEC-63039 - Probablistic risk analysis of technological systems - Estimation of final event rate at a given initial state
- IEC-812 - Analysis Techniques for System Reliability - Procedure for Failure Mode and Effects Analysis (FMEA)
ISO:
- ISO-10017 - Quality management - Guidance on statistical techniques for ISO 9001:2015
- ISO-10017 SPANISH - Quality management - Guidance on statistical techniques for ISO 9001:2015 [Standard in Spanish]
- ISO-10576 - Statistical methods - Guidelines for the evaluation of conformity with specified requirements
- ISO-10576-1 - Statistical methods - Guidelines for the evaluation of conformity with specified requirements - Part 1: General principles
- ISO-10725 - Acceptance sampling plans and procedures for the inspection of bulk materials
- ISO-11095 - Linear calibration using reference materials
- ISO-11453 - Statistical interpretation of data - Tests and confidence intervals relating to proportions
- ISO-11462-1 - Guidelines for implementation of statistical process control (SPC) - Part 1: Elements of SPC
- ISO-11462-2 - Guidelines for implementation of statistical process control (SPC) - Part 2: Catalogue of tools and techniques
- ISO-11462-3 - Guidelines for implementation of statistical process control (SPC) - Part 3: Reference data sets for SPC software validation
- ISO-11462-4 - Guidelines for implementation of statistical process control (SPC) - Part 4: Reference data sets for measurement process analysis software validation
- ISO-11462-5 - Guidelines for implementation of statistical process control (SPC) - Part 5: Quality data exchange format for SPC software
- ISO-11648-1 - Statistical aspects of sampling from bulk materials - Part 1: General principles
- ISO-11648-2 - Statistical aspects of sampling from bulk materials - Part 2: Sampling of particulate materials
- ISO-11843-1 - Capability of detection - Part 1: Terms and definitions
- ISO-11843-2 - Capability of detection -- Part 2: Methodology in the linear calibration case
- ISO-11843-3 - Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
- ISO-11843-4 - Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value
- ISO-11843-5 - Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
- ISO-11843-5-AM1 - - Amendment 1
- ISO-11843-6 - Capability of detection - Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
- ISO-11843-7 - Capability of detection - Part 7: Methodology based on stochastic properties of instrumental noise
- ISO-11843-8 - Capability of detection - Part 8: Guidance for the implementation of the ISO 11843 series
- ISO-12845 - Selected illustrations of fractional factorial screening experiments
- ISO-12888 - Selected illustrations of gauge repeatability and reproducibility studies
- ISO-13053-1 - Quantitative methods in process improvement - Six Sigma - Part 1: DMAIC methodology
- ISO-13053-2 - Quantitative methods in process improvement - Six Sigma - Part 2: Tools and techniques
- ISO-13195 - Selected illustrations of response surface method - Central composite design
- ISO-13425 - Guidelines for the selection of statistical methods in standardization and specification
- ISO-13448-1 - Acceptance sampling procedures based on the allocation of priorities principle (APP) - Part 1: Guidelines for the APP approach
- ISO-13448-2 - Acceptance sampling procedures based on the allocation of priorities principle (APP) - Part 2: Coordinated single sampling plans for acceptance sampling by attributes
- ISO-13519 - Guidance on the development and use of ISO statistical publications supported by software
- ISO-13528 - Statistical methods for use in proficiency testing by interlaboratory comparison
- ISO-13587 - Three statistical approaches for the assessment and interpretation of measurement uncertainty
- ISO-14468 - Selected illustrations of attribute agreement analysis
- ISO-14560 - Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
- ISO-16269-4 - Statistical interpretation of data - Part 4: Detection and treatment of outliers
- ISO-16269-6 - Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals
- ISO-16269-7 - Statistical interpretation of data -- Part 7: Median -- Estimation and confidence intervals
- ISO-16269-8 - Statistical interpretation of data - Part 8: Determination of prediction intervals
- ISO-16336 - Applications of statistical and related methods to new technology and product development process - Robust parameter design (RPD)
- ISO-16337 - Application of statistical and related methods to new technology and product development process - Robust tolerance design (RTD)
- ISO-16355-1 - Application of statistical and related methods to new technology and product development process - Part 1: General principles and perspectives of quality function deployment (QFD)
- ISO-16355-2 - Applications of statistical and related methods to new technology and product development process - Part 2: Non-quantitative approaches for the acquisition of voice of customer and voice of stakeholder
- ISO-16355-3 - Applications of statistical and related methods to new technology and product development process - Part 3: Quantitative approaches for the acquisition of voice of customer and voice of stakeholder
- ISO-16355-4 - Applications of statistical and related methods to new technology and product development process - Part 4: Analysis of non-quantitative and quantitative Voice of Customer and Voice of Stakeholder
- ISO-16355-5 - Applications of statistical and related methods to new technology and product development process - Part 5: Solution strategy
- ISO-16355-6 - Applications of statistical and related methods to new technology and product development process - Part 6: Guidance for QFD-related approaches to optimization
- ISO-16355-7 - Applications of statistical and related methods to new technology and product development process - Part 7: Guidelines for developing digitalized products and services - General principles and perspectives of the QFD method
- ISO-16355-8 - Applications of statistical and related methods to new technology and product development process - Part 8: Guidelines for commercialization and life cycle
- ISO-16705 - Statistical methods for implementation of Six Sigma - Selected illustrations of contingency table analysis
- ISO-17258 - Statistical methods - Six Sigma - Basic criteria underlying benchmarking for Six Sigma in organisations
- ISO-18404 - Quantitative methods in process improvement - Six Sigma - Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation
- ISO-18414 - Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
- ISO-18532 - Guidance on the application of statistical methods to quality and to industrial standardization
- ISO-20693 - Statistical methods for implementation of Six Sigma - Selected illustrations of distribution identification studies
- ISO-21247 - Combined accept-zero sampling systems and process control procedures for product acceptance
- ISO-21747 - Statistical methods - Process performance and capability statistics for measured quality characteristics
- ISO-22514-1 - Statistical methods in process management - Capability and performance - Part 1: General principles and concepts
- ISO-22514-2 - Statistical methods in process management - Capability and performance - Part 2: Process capability and performance of time-dependent process models
- ISO-22514-3 - Statistical methods in process management - Capability and performance - Part 3: Machine performance studies for measured data on discrete parts
- ISO-22514-4 - Statistical methods in process management - Capability and performance - Part 4: Process capability estimates and performance measures
- ISO-22514-5 - Statistical methods in process management - Capability and performance - Part 5: Process capability estimates and performance for attributive characteristics
- ISO-22514-6 - Statistical methods in process management - Capability and performance - Part 6: Process capability statistics for characteristics following a multivariate normal distribution
- ISO-22514-7 - Statistical methods in process management - Capability and performance - Part 7: Capability of measurement processes
- ISO-22514-7-AM1 - - Amendment 1: Statistical methods in process management - Capability and performance - Part 7: Capability of measurement processes - Amendment 1
- ISO-22514-8 - Statistical methods in process management - Capability and performance - Part 8: Machine performance of a multi-state production process
- ISO-22514-9 - Statistical methods in process management - Capability and performance - Part 9: Process capability statistics for characteristics defined by geometrical specifications
- ISO-22914 - Statistical methods for implementation of Six Sigma - Selected illustration of analysis of variance
- ISO-22971 - Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
- ISO-23471 - Experimental designs for evaluation of uncertainty - Use of factorial designs for determining uncertainty functions
- ISO-24153 - Random sampling and randomization procedures
- ISO-2602 - Statistical interpretation of test results - Estimation of the mean - Confidence interval
- ISO-27877 - Statistical analysis for evaluating the precision of binary measurement methods and their results
- ISO-27878 - Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
- ISO-28037 - Determination and use of straight-line calibration functions
- ISO-2854 - Statistical interpretation of data - Techniques of estimation and tests relating to means and variances
- ISO-28590 - Sampling procedures for inspection by attributes - Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
- ISO-2859-0 - Sampling procedures for inspection by attributes - Part 0: Introduction to the ISO 2859 attribute sampling system
- ISO-28591 - Sequential sampling plans for inspection by attributes
- ISO-2859-1 - Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- ISO-2859-10 - Sampling procedures for inspection by attributes - Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
- ISO-2859-1-AM1 - Sampling procedures for inspection by attributes - Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection - Amendment 1
- ISO-28592 - Double sampling plans by attributes with minimal sample sizes, indexed by producers risk quality (PRQ) and consumers risk quality (CRQ)
- ISO-2859-2 - Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
- ISO-28593 - Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
- ISO-2859-3 - Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures
- ISO-28594 - Combined accept-zero sampling systems and process control procedures for product acceptance
- ISO-2859-4 - Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels
- ISO-2859-5 - Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- ISO-28596 - Sampling procedures for inspection by attributes - Two-stage sampling plans for auditing and for inspection under prior information
- ISO-28597 - Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
- ISO-28598-1 - Acceptance sampling procedures based on the allocation of priorities principle (APP) - Part 1: Guidelines for the APP approach
- ISO-28598-2 - Acceptance sampling procedures based on the allocation of priorities principle (APP) - Part 2: Coordinated single sampling plans for acceptance sampling by attributes
- ISO-28640 - Random variate generation methods
- ISO-28801 - Double sampling plans by attributes with minimal sample sizes, indexed by producers risk quality (PRQ) and consumers risk quality (CRQ)
- ISO-29901 - Selected illustrations of full factorial experiments with four factors
- ISO-3207 - Statistical interpretation of data - Determination of a statistical tolerance interval
- ISO-3207/1 - Addendum 1 to ISO 3207:1975
- ISO-3301 - Statistical interpretation of data - Comparison of two means in the case of paired observations
- ISO-3494 - Statistical interpretation of data - Power of tests relating to means and variances
- ISO-3534-1 - Statistics - Vocabulary and symbols - Part 1: General statistical terms and terms used in probability
- ISO-3534-2 - Statistics - Vocabulary and symbols - Part 2: Applied statistics
- ISO-3534-3 - Statistics - Vocabulary and symbols - Part 3: Design of experiments
- ISO-3534-4 - Statistics - Vocabulary and symbols - Part 4: Survey sampling
- ISO-3951 - Sampling procedures and charts for inspection by variables for percent nonconforming
- ISO-39511 - Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
- ISO-3951-1 - Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
- ISO-3951-2 - Sampling procedures for inspection by variables - Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
- ISO-3951-2-1 - Sampling procedures for inspection by variables - Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristicsAmendment 1
- ISO-3951-3 - Sampling procedures for inspection by variables - Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- ISO-3951-4 - Sampling procedures for inspection by variables - Part 4: Procedures for assessment of declared quality levels
- ISO-3951-5 - Sampling procedures for inspection by variables - Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
- ISO-3951-6 - Sampling procedures for inspection by variables - Part 6: Specification for single sampling plans for isolated lot inspection indexed by limiting quality (LQ)
- ISO-5479 - Statistical interpretation of data - Tests for departure from the normal distribution
- ISO-5725-1 - Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
- ISO-5725-2 - Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
- ISO-5725-3 - Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate precision and alternative designs for collaborative studies
- ISO-5725-4 - Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
- ISO-5725-5 - Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
- ISO-5725-6 - Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
- ISO-7870 - Control charts - General guide and introduction
- ISO-7870-1 - Control charts - Part 1: General guidelines
- ISO-7870-2 - Control charts - Part 2: Shewhart control charts
- ISO-7870-3 - Control charts - Part 3: Acceptance control charts
- ISO-7870-4 - Control charts - Part 4: Cumulative sum charts
- ISO-7870-5 - Control charts - Part 5: Specialized control charts
- ISO-7870-6 - Control charts - Part 6: EWMA control charts for the process mean
- ISO-7870-7 - Control charts - Part 7: Multivariate control charts
- ISO-7870-8 - Control charts - Part 8: Charting techniques for short runs and small mixed batches
- ISO-7870-9 - Control charts - Part 9: Control charts for stationary processes
- ISO-7871 - Cumulative sum charts - Guidance on quality control and data analysis using CUSUM techniques
- ISO-7873 - Control charts for arithmetic average with warning limits
- ISO-7966 - Acceptance control charts
- ISO-8258 - Corrigendum
- ISO-8422 - Sequential sampling plans for inspection by attributes
- ISO-8423 - Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
- ISO-8550 - Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots
- ISO-8550-1 - Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 1: Acceptance sampling
- ISO-8550-2 - Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 2: Sampling by attributes
- ISO-8550-3 - Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 3: Sampling by variables
- ISO-8595 - Interpretation of statistical data -- Estimation of a median
Other SDOs:
- BS-EN-IEC-61754-13-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
- BS-ISO-7870-6-TC - Tracked Changes. Control charts
- EN-60300-3-12 - Dependability management - Part 3-12: Application guide - Integrated logistic support
- EN-60706-5 - Maintainability of Equipment, Testability & Diagnostic Testing
- EN-61124 - Reliability testing - Compliance tests for constant failure rate and constant failure intensity
- EN-61163-1 - Reliability Stress Screening, Repairable Assemblies Manufactured in Lots
- EN-61165 - Application of Markov Techiques
- EN-61649 - Weibull Analysis
- EN-61703 - Mathematical expressions for reliability, availability, maintainability and maintenance support terms
- EN-61710 - Power law model - Goodness-of-fit tests and estimation methods
- EN-IEC-60812 - Failure modes and effects analysis (FMEA and FMECA)
- JIS-Z-9015-3 - Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures
- JIS-Z-9021 - Shewhart control charts
- SIS-CEN/TR-10345 - Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
- SIS-CEN/TR-16369 - Use of control charts in the production of concrete
- SIS-ISO/TR-10017 - Guidance on statistical techniques for ISO 9001:2000
- SIS-ISO/TR-7871 - Cumulative sum charts - Guide to quality control and data analysis using CUSUM techniques
- SIS-ISO/TS-13399-60 - Cutting tool data representation and exchange - Part 60: Reference dictionary for connection systems (ISO/TS 13399-60:2014, IDT)
- SS-14210 - Statistical interpretation of data - Estimation of the mean - Confidence interval
- SS-14211 - Statistical interpretation of data - Techniques of estimation and tests relating to means and variances
- SS-14212 - Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
- SS-14213 - Statistical interpretation of data - Comparison of two means in the case of paired observations
- SS-14214 - Statistical interpretation of data - Power of tests relating to means and variances
- SS-20130 - Sampling procedures and tables for inspection by attributes - Swedish standard based on ISO 2859
- SS-20131 - Sampling procedures for inspection by attributes - Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
- SS-20140 - Sampling procedures and charts for inspection by variables for percent defective
- SS-EN-60812 - Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
- SS-ISO-10017 - Quality management - Guidance on statistical techniques for ISO 9001:2015 (ISO 10017:2021, IDT)
- SS-ISO-10576-1 - Statistical methods - Guidelines for the evaluation of conformity with specified requirements - Part 1: General principles (ISO 10576-1:2003, IDT)
- SS-ISO-11095 - Linear calibration using reference materials (ISO 11095:1996, IDT)
- SS-ISO-11453 - Statistical interpretation of data - Tests and confidence intervals relating to proportions (ISO 11453:1996 + Cor 1:1999, IDT)
- SS-ISO-11462-1 - Guidelines for implementation of statistical process control (SPC) - Part 1: Elements of SPC (ISO 11462-1:2001, IDT)
- SS-ISO-11843-1 - Capability of detection - Part 1: Terms and definitions (ISO 11843-1:1997 + Cor 1:2003, IDT)
- SS-ISO-11843-2 - Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000, IDT)
- SS-ISO-11843-3 - Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used (ISO 11843-3:2003, IDT)
- SS-ISO-11843-4 - Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value (ISO 11843-4:2003, IDT)
- SS-ISO-16269-6 - Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals (ISO 16269-6:2005, IDT)
- SS-ISO-16269-7 - Statistical interpretation of data - Part 7: Median - Estimation and confidence intervals (ISO 16269-7:2001, IDT)
- SS-ISO-16269-8 - Statistical interpretation of data - Part 8: Determination of prediction interval (ISO 16269-8:2004, IDT)
- SS-ISO-5725-1 - Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
- SS-ISO-5725-2 - Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
- SS-ISO-5725-3 - Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of precision of a standard measurement method
- SS-ISO-5725-4 - Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
- SS-ISO-5725-5 - Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
- SS-ISO-5725-6 - Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
- SS-ISO-7870 - Control charts - General guide and introduction (ISO 7870:1993, IDT)
- SS-ISO-7873 - Control charts for arithmetic average warning limits (ISO 7873:1993, IDT)
- SS-ISO-7966 - Acceptance control charts (ISO 7966:1993, IDT)
- SS-ISO-8258 - Shewhart control charts (ISO 8258:1991+ Cor 1:1993, IDT)
- UNE-ISO-3534-4 - Statistics - Vocabulary and symbols - Part 4: Survey sampling