Document Center List of Standards on Alarm And Warning Systems Burglar Alarm And Warning Systems, See 13.310 Warning Devices For Road Vehicles, See 43.040.20
ICS Code 13.320
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-C1238 - Standard Guide for Installation of Walk-Through Metal Detectors
- ASTM-C1269 - Standard Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors
- ASTM-C1270 - Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through
Metal Detectors - ASTM-C1309 - Standard Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors
- ASTM-D3284 - Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
- ASTM-D4490 - Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors
- ASTM-D4599 - Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
- ASTM-E2885 - Standard Specification for Handheld Point Chemical Vapor Detectors (HPCVD) for Homeland Security Applications
- ASTM-E2933 - Standard Specification for Stationary Point Chemical Vapor Detectors (SPCVD) for Homeland Security Applications
- ASTM-F1258 - Standard Practice for Emergency Medical Dispatch
- ASTM-F1465 - Standard Guide for Selection of Security Control Systems (Withdrawn 2012)
- ASTM-F2208 - Standard Safety Specification for Residential Pool Alarms
- ASTM-F2401 - Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
- ASTM-F3020 - Standard Performance Specifications and Test Methods for Hand-Worn Metal Detectors Used in Safety and Security
- ASTM-F3278 - Standard Performance Specifications and Test Methods for Hand-Held Metal Detectors Used in Safety and Security
BSI:
- BIP-2044 - The Design, Installation, Commissioning and Maintenance of Fire Detection and Fire Alarm Systems in Domestic Premises. A Guide to BS 58396:2019. 4th Edition
- BIP-2109 - The Design, Installation, Commissioning and Maintenance of Fire Detection and Fire Alarm Systems in NonDomestic Premises. A Guide to BS 58391:2017. 5th Edition
- BIP-2109/2044 KIT - The Design, Installation, Commissioning and Maintenance of Fire Detection and Fire Alarm Systems in Non-Domestic Premises. A Guide to BS 58391:2017. 5th Edition. The Design, Installation, Commissioning and Maintenance of Fire Detection and Fire Alarm Systems in Domestic Premises. A Guide to BS 58396:2019. 4th Edition
- BIP-2124 - The Design, Installation, Commissioning and Maintenance of Voice Alarm Systems. A Guide to BS 5839-8:2013
- BS-2740 - Simple Smoke Alarms & Alarm Metering Devices, Specification For
- BS-5502-52 - Buildings and structures for agriculture
- BS-5839-1 - Fire detection and fire alarm systems for buildings
- BS-5839-2 - Fire Detection & Alarm Systems for Buildings, Specification for Manual Call Points
- BS-5839-3 - Fire detection and alarm systems for buildings
- BS-5839-4 - Part 4: Specification for Control & Indicating Equipment, Fire Detection & Alarm Systems
- BS-5839-6 - Fire detection and fire alarm systems for buildings
- BS-5839-6-EXPERT COMMENTARY - Expert Commentary for BS 5839-6:2019. Fire detection and fire alarm systems for buildings
- BS-5839-6-TC - Tracked Changes. Fire detection and fire alarm systems for buildings
- BS-5839-6-TC/EXPERT COMMENTARY KIT - Tracked Changes. Fire detection and fire alarm systems for buildings.
- BS-5839-8 - Fire detection and fire alarm systems for buildings
- BS-5839-8 Ex Comm - Expert Commentary for BS 5839-8:2023 Fire detection and fire alarm systems for buildings
- BS-5839-9-TC - Tracked Changes. Fire detection and fire alarm systems for buildings
- BS-5979 - Remote centres receiving signals from fire and security systems. Code of practice, Withdrawn, Replaced by BS-8591
- BS-7618-1 - Alarm signals for anaesthesia and respiratory care. Specification for visual alarm signals
- BS-7807 - Code of Practice for Design, Installation & Servicing of Inttegrated Systems Incorpora
- BS-7827 - Designing, specifying, maintaining and operating emergency sound systems for sports grounds, large public buildings, and venues. Code of Practice
- BS-7927 - Heating appliances for domestic applications. Portable apparatus designed to detect and measure specific combustion flue gas products. Requirements
- BS-7958 - Closed circuit television (CCTV). Management and operation. Code of practice
- BS-8486-5 - Examination and test of new lifts before putting into service. Specification for means of determining compliance with BS EN 81
- BS-8494 - Electronic portable and transportable apparatus designed to detect and measure carbon dioxide in indoor ambient air. Requirements and test methods
- BS-8521 - Specification for dual-tone multi-frequency (DTMF) signalling protocol for social alarm systems
- BS-8591 - Remote centres receiving signals from alarm systems. Code of practice
- BS-8604-1 - Social alarm systems
- BS-9518 - Processing of alarm signals by an alarm receiving centre. Code of practice
- BS-9518 EXPERT COMM - Expert Commentary for BS 9518:2021. Processing of alarm signals by an alarm receiving centre. Code of practice
- BS-9518-TC - Tracked Changes. Processing of alarm signals by an alarm receiving centre. Code of practice
- BS-EN-12613 - Plastics warning devices for underground cables and pipelines with visual characteristics
- BS-EN-14604 - Smoke alarm devices
- BS-EN-15327-1 - Railway applications. Passenger alarm subsystem
- BS-EN-16280 - Breath alcohol test devices for general public. Requirements and test methods
- BS-EN-16334 - Railway applications. Passenger Alarm System. System requirements
- BS-EN-16334-1 - Railway applications. Passenger Alarm System
- BS-EN-16334-2 - Railway applications. Passenger alarm system
- BS-EN-16683 - Railway applications. Call for aid and communication device. Requirements
- BS-EN-17355 - Railway applications. Communication device for urban rail. System requirements
- BS-EN-45544-1 - Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-45544-1-TC - Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-45544-2 - Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-45544-2-TC - Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-45544-3 - Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-45544-3-TC - Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-45544-4 - Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-45544-4-TC - Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-50073 - Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
- BS-EN-50104 - Electrical equipment for the detection and measurement of oxygen. Performance requirements and test methods
- BS-EN-50130-4 - Alarm systems
- BS-EN-50130-5 - Alarm systems
- BS-EN-50131-10 - Alarm systems. Intrusion and hold-up systems
- BS-EN-50131-13 - Alarm systems. Intrusion and hold-up systems
- BS-EN-50131-2-3 - Alarm systems. Intrusion and hold-up systems
- BS-EN-50131-2-5 - Alarm systems. Intrusion and hold-up systems
- BS-EN-50131-2-6 - Alarm systems. Intrusion and hold-up systems
- BS-EN-50131-2-7-1 - Alarm systems. Intrusion and hold-up systems
- BS-EN-50131-2-7-2 - Alarm systems. Intrusion and hold-up systems
- BS-EN-50131-2-7-3 - Alarm systems. Intrusion and hold-up systems
- BS-EN-50131-2-8 - Alarm systems. Intrusion and hold-up systems
- BS-EN-50131-2-8-TC - Tracked Changes. Alarm systems. Intrusion and hold-up systems
- BS-EN-50131-4 - Alarm systems. Intrusion and hold-up systems
- BS-EN-50131-8 - Alarm systems. Intrusion and hold-up systems
- BS-EN-50132-1 - Alarm systems. CCTV surveillance systems for use in security applications. System requirements
- BS-EN-50133-1 - Alarm Systems, Access Control Systems for Use in Security Applications, System Require
- BS-EN-50133-2-1 - Alarm systems. Access control systems for use in security applications.
- BS-EN-50133-7 - Alarm systems. Access control systems for use in security applications. Application guidelines
- BS-EN-50134-1 - Alarm systems. Social alarm systems
- BS-EN-50134-2 - Alarm systems. Social alarm systems
- BS-EN-50134-2-TC - Tracked Changes. Alarm systems. Social alarm systems
- BS-EN-50134-3 - Alarm systems. Social alarm systems
- BS-EN-50134-5 - Alarm systems. Social alarm systems
- BS-EN-50134-5-TC - Tracked Changes. Alarm systems. Social alarm systems
- BS-EN-50134-7 - Alarm systems. Social alarm systems
- BS-EN-50134-7-TC - Tracked Changes. Alarm systems. Social alarm systems
- BS-EN-50136-1 - Alarm systems. Alarm transmission systems and equipment
- BS-EN-50136-1-1 - Alarm systems. Alarm transmission systems and equipment. General requirements for alarm transmission systems
- BS-EN-50136-1-2 - Alarm systems. Alarm transmission systems and equipment. Requirements for systems using dedicated alarm paths
- BS-EN-50136-1-3 - Alarm systems. Alarm transmission systems and equipment. Requirements for systems with digital communicators using the public switched telephone network
- BS-EN-50136-1-4 - Alarm systems. Alarm transmission systems and equipment. Requirements for systems with voice communicators using the public switched telephone network
- BS-EN-50136-1-5 - Alarm systems. Alarm transmission systems and equipment. Requirements for packet switched network PSN
- BS-EN-50136-2 - Alarm systems. Alarm transmission systems and equipment
- BS-EN-50136-2-1 - Alarm systems. Alarm transmission systems and equipment. General requirements for alarm transmission equipment
- BS-EN-50136-2-2 - Alarm systems. Alarm transmission systems and equipment
- BS-EN-50136-2-3 - Alarm systems. Alarm transmission systems and equipment
- BS-EN-50136-2-4 - Alarm systems. Alarm transmission systems and equipment
- BS-EN-50136-3 - Alarm systems. Alarm transmission systems and equipment
- BS-EN-50194 - Electrical Apparatus for the Detection of Combustible Gases in Domestic Premises - Te
- BS-EN-50194-1 - Electrical apparatus for the detection of flammable gases in household premises
- BS-EN-50194-1-TC - Tracked Changes. Electrical apparatus for the detection of flammable gases in household premises
- BS-EN-50194-2 - Electrical apparatus for the detection of combustible gases in domestic premises
- BS-EN-50241-1 - Part 1: General Requirements & Test Methods, Specification for Open Path Apparatus for The
- BS-EN-50241-2 - Specification for open path apparatus for the detection of combustible or toxic gases and vapours
- BS-EN-50244 - Electrical apparatus for the detection of combustible gases in domestic premises. Guide on the selection, installation, use and maintenance
- BS-EN-50244-TC - Tracked Changes. Electrical apparatus for the detection of combustible gases in domestic premises. Guide on the selection, installation, use and maintenance
- BS-EN-50270 - Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
- BS-EN-50271 - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
- BS-EN-50271-TC - Tracked Changes. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
- BS-EN-50291-1 - Gas detectors. Electrical apparatus for the detection of carbon monoxide in domestic premises
- BS-EN-50291-1-TC - Tracked Changes. Gas detectors. Electrical apparatus for the detection of carbon monoxide in domestic premises
- BS-EN-50292 - Electrical apparatus for the detection of carbon monoxide in domestic premises, caravans and boats. Guide on the selection, installation, use and maintenance
- BS-EN-50292-TC - Tracked Changes. Electrical apparatus for the detection of carbon monoxide in domestic premises, caravans and boats. Guide on the selection, installation, use and maintenance
- BS-EN-50398-1 - Alarm systems. Combined and integrated alarm systems
- BS-EN-50398-1-TC - Tracked Changes. Alarm systems. Combined and integrated alarm systems
- BS-EN-50402 - Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of gas detection systems
- BS-EN-50402-TC - Tracked Changes. Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of gas detection systems
- BS-EN-50518-1 - Monitoring and alarm receiving centre
- BS-EN-50518-2 - Monitoring and alarm receiving centre
- BS-EN-50518-3 - Monitoring and alarm receiving centre
- BS-EN-50676 - Electrical equipment used for detection and concentration measurement of refrigerant gases. Performance requirements and test methods
- BS-EN-50710 - Requirements for the provision of secure remote services for fire safety systems and security systems
- BS-EN-50724 - Fixed Ultrasonic Gas Leak Detectors (UGLD). General requirements and test methods
- BS-EN-50849 - Sound systems for emergency purposes
- BS-EN-54-11 - Fire detection and fire alarm systems
- BS-EN-54-3 - Fire detection and fire alarm systems
- BS-EN-54-7 - Fire detection and fire alarm systems
- BS-EN-60079-29-1 - Explosive atmospheres
- BS-EN-60079-29-2 - Explosive atmospheres
- BS-EN-60079-29-2-TC - Tracked Changes. Explosive atmospheres
- BS-EN-60079-29-4 - Explosive atmospheres
- BS-EN-60839-11-1 - Alarm and electronic security systems
- BS-EN-60839-11-2 - Alarm and electronic security systems
- BS-EN-60839-11-31 - Alarm and electronic security systems
- BS-EN-60839-11-32 - Alarm and electronic security systems
- BS-EN-60849 - Sound systems for emergency purposes
- BS-EN-61779-1 - Electrical Apparatus for the Detection & Measurement of Flammable Gases, General Requi
- BS-EN-62676-1-1 - Video surveillance systems for use in security applications
- BS-EN-62676-1-2 - Video surveillance systems for use in security applications
- BS-EN-62676-2-1 - Video surveillance systems for use in security applications
- BS-EN-62676-2-2 - Video surveillance systems for use in security applications
- BS-EN-62676-2-3 - Video surveillance systems for use in security applications
- BS-EN-62676-3 - Video surveillance systems for use in security applications
- BS-EN-62676-4 - Video surveillance systems for use in security applications
- BS-EN-62682 - Management of alarms systems for the process industries
- BS-EN-62820-1-1 - Building intercom systems
- BS-EN-62820-1-2 - Building intercom systems
- BS-EN-81-28 - Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods
- BS-EN-81-28-TC - Tracked Changes. Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods
- BS-EN-981 - Safety of machinery. System of auditory and visual danger and information signals
- BS-EN-IEC-60839-11-33 - Alarm and electronic security systems
- BS-EN-IEC-62676-2-31 - Video surveillance systems for use in security applications
- BS-EN-IEC-62676-2-32 - Video surveillance systems for use in security applications
- BS-EN-IEC-62676-2-33 - Video surveillance systems for use in security applications
- BS-EN-IEC-62676-5 - Video surveillance systems for use in security applications
- BS-EN-IEC-62682-TC - Tracked Changes. Management of alarm systems for the process industries
- BS-EN-IEC-62820-2 - Building intercom systems
- BS-EN-IEC-62820-3-1 - Building intercom systems
- BS-EN-IEC-62820-3-2 - Building intercom systems
- BS-EN-ISO-7731 - Ergonomics. Danger signals for public and work areas. Auditory danger signals
- BS-IEC-60079-29-2 - Explosive atmospheres. Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen
- BS-IEC-62676-4 - Video surveillance systems for use in security applications. Application guidelines
- BS-ISO-13475-1 - Acoustics. Stationary audible warning devices used outdoors
- BS-ISO-7731 - Ergonomics. Danger signals for public and work areas. Auditory danger signals
- DD-265 - Protocol for communications between a lift alarm system and an alarm receiving station (rescue centre). Specification
- DD-CLC-50131-2-5 - Alarm systems. Intrusion systems. Requirements for combined passive infrared and ultrasonic detectors
- DD-CLC-50131-2-7-1 - Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Glass break detectors (acoustic)
- DD-CLC-50131-2-7-2 - Alarm systems. Intrusion and hold-up systems
- DD-CLC-50131-2-7-3 - Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Glass break detectors (active)
- DD-CLC-50131-7 - Alarm systems. Intrusion and hold-up systems
- DD-CLC-50134-7 - Alarm systems. Social alarm systems. Application guidelines
- DD-CLC-50398 - Alarm systems. Combined and integrated systems. General requirements
- KIT-139 - Design of Fire Detection Installations for Dwellings Kit
- PAS-38 - Installation and Remote Monitoring of Detector Activated Cctvsystems, Code of Practice
- PD-6531 - Queries and interpretations on BS 5839-1
- PD-6531-TC - Tracked Changes. Queries and interpretations on BS 5839-1
- PD-6608 - Guide To Achieving Compliance With EC Directives for Alarm Systems
- PD-6669 - Guidance for the provision of Alarm Transmission Systems (ATS) for Alarm Systems in the UK
- PD-CEN-17470 - Service model for social care alarms
- PD-CEN-54-32 - Fire detection and fire alarm systems
- PD-CLC-50131-12 - Alarm systems. Intrusion and hold-up systems
- PD-CLC-50131-2-10 - Alarm systems. Intrusion and hold-up systems
- PD-CLC-50131-2-11 - PD CLC/TS 50131-2-11 Alarm systems - Intrusion and hold-up systems
- PD-CLC-50131-2-8 - Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Shock detectors
- PD-CLC-50131-2-9 - Alarm systems. Intrusion and hold-up systems
- PD-CLC-50131-5-1 - Alarm systems. Intrusion systems
- PD-CLC-50131-9 - Alarm systems. Intrusion and hold-up systems
- PD-CLC-50134-9 - Alarm systems. Social alarm systems
- PD-CLC-50136-10 - Alarm systems. Alarm transmission systems and equipment
- PD-CLC-50136-7 - Alarm systems. Alarm transmission systems and equipment
- PD-CLC-50136-9 - Alarm systems. Alarm transmission systems and equipment
- PD-CLC-50436-3 - Alcohol interlocks. Test methods and performance requirements
- PD-CLC-50456 - Alarm systems. Guidelines to achieving compliance with EC directives for equipment of alarm systems
- PD-CLC-50531 - Alarm systems. Terms and definitions
- PD-CLC-50661-1 - Alarm systems. External perimeter security systems
IEC:
- IEC-60839-11-1 - Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements
- IEC-60839-11-2 - Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines
- IEC-60839-11-31 - Alarm and electronic security systems - Part 11-31: Electronic access control systems - Core interoperability protocol based on Web services
- IEC-60839-11-32 - Alarm and electronic security systems - Part 11-32: Electronic access control systems - Access control monitoring based on Web services
- IEC-60839-11-33 - Alarm and electronic security systems - Part 11-33: Electronic access control systems - Access control configuration based on Web services
- IEC-60839-11-5 - Alarm and electronic security systems - Part 11-5: Electronic access control systems - Open supervised device protocol (OSDP)
- IEC-60839-5-1 - Alarm and electronic security systems - Part 5-1: Alarm transmission systems - General requirements
- IEC-60839-5-2 - Alarm and electronic security systems - Part 5-2: Alarm transmission systems - Requirements for supervised premises transceiver (SPT)
- IEC-60839-5-3 - Alarm and electronic security systems - Part 5-3: Alarm transmission systems - Requirements for receiving centre transceiver (RCT)
- IEC-60839-7-1 - Alarm systems - Part 7-1: Message formats and protocols for serial data interfaces in alarm transmission systems - General
- IEC-60839-7-11 - Alarm systems - Part 7-11: Message formats and protocols for serial data interfaces in alarm transmission systems - Serial protocol for use by digital communicator systems using ITU-T Recommandation V.23 signalling at interfaces with the PSTN
- IEC-60839-7-12 - Alarm systems - Part 7-12: Message formats and protocols for serial data interfaces in alarm transmission systems - PTT interfaces for dedicated communications channels using ITU-T Recommendation V.23 signalling
- IEC-60839-7-2 - Alarm systems - Part 7-2: Message formats and protocols for serial data interfaces in alarm transmission systems - Common application layer protocol
- IEC-60839-7-20 - Alarm systems - Part 7-20: Message formats and protocols for serial data interfaces in alarm transmission systems - Terminal interfaces employing ITU-T Recommendation V.24/V.28 signalling
- IEC-60839-7-3 - Alarm systems - Part 7-3: Message formats and protocols for serial data interfaces in alarm transmission systems - Common data link layer protocol
- IEC-60839-7-4 - Alarm systems - Part 7-4: Message formats and protocols for serial data interfaces in alarm transmission systems - Common transport layer protocol
- IEC-60839-7-5 - Alarm systems - Part 7-5: Message formats and protocols for serial data interfaces in alarm transmission systems - Alarm system interfaces employing a two-wire configuration in accordance with ISO/IEC 8482
- IEC-60839-7-6 - Alarm systems - Part 7-6: Message formats and protocols for serial data interfaces in alarm transmission systems - Alarm system interfaces employing ITU-T Recommendation V.24/V.28 signalling
- IEC-60839-7-7 - Alarm systems - Part 7-7: Message formats and protocols for serial data interfaces in alarm transmission systems - Alarm system interfaces for plug-in alarm system transceivers
- IEC-60839-7-8 - Alarm systems - Part 7-8: Message formats and protocols for serial data interfaces in alarm transmission systems . Requirements for common protocol for alarm transmission using the Internet protocol
- IEC-60849 - Sound Systems for Emergency Purposes
- IEC-62599-1 - Alarm systems - Part 1: Environmental test methods
- IEC-62599-2 - Alarm systems - Part 2: Electromagnetic compatibility - Immunity requirements for components of fire and security alarm systems
- IEC-62642-1 - Alarm systems - Intrusion and hold-up systems - Part 1: System requirements
- IEC-62642-2-2 - Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors
- IEC-62642-2-3 - Alarm systems - Intrusion and hold-up systems - Part 2-3: Intrusion detectors - Microwave detectors
- IEC-62642-2-4 - Alarm systems - Intrusion and hold-up systems - Part 2-4: Intrusion detectors - Combined passive infrared / Microwave detectors
- IEC-62642-2-5 - Alarm systems - Intrusion and hold-up systems - Part 2-5: Intrusion detectors - Combined passive infrared / Ultrasonic detectors
- IEC-62642-2-6 - Alarm systems - Intrusion and hold-up systems - Part 2-6: Intrusion detectors - Opening contacts (magnetic)
- IEC-62642-2-71 - Alarm systems - Intrusion and hold-up systems - Part 2-71: Intrusion detectors - Glass break detectors (acoustic)
- IEC-62642-2-72 - Alarm systems - Intrusion and hold-up systems - Part 2-72: Intrusion detectors - Glass break detectors (passive)
- IEC-62642-2-73 - Alarm systems - Intrusion and hold-up systems - Part 2-73: Intrusion detectors - Glass break detectors (active)
- IEC-62642-3 - Alarm systems - Intrusion and hold-up systems - Part 3: Control and indicating equipment
- IEC-62642-4 - Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices
- IEC-62642-5-3 - Alarm systems - Intrusion and hold-up systems - Part 5-3: Interconnections - Requirements for equipment using radio frequency techniques
- IEC-62642-6 - Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies
- IEC-62642-7 - Alarm systems - Intrusion and hold-up systems - Part 7: Application guidelines
- IEC-62642-8 - Alarm systems - Intrusion and hold-up systems - Part 8: Security fog device/systems
- IEC-62676-1-1 - Video surveillance systems for use in security applications - Part 1-1: System requirements - General
- IEC-62676-1-2 - Video surveillance systems for use in security applications - Part 1-2: System requirements - Performance requirements for video transmission
- IEC-62676-2-1 - Video surveillance systems for use in security applications - Part 2-1: Video transmission protocols - General requirements
- IEC-62676-2-2 - Video surveillance systems for use in security applications - Part 2-2: Video transmission protocols - IP interoperability implementation based on HTTP and REST services
- IEC-62676-2-3 - Video surveillance systems for use in security applications - Part 2-3: Video transmission protocols - IP interoperability implementation based on Web services
- IEC-62676-2-31 - Video surveillance systems for use in security applications - Part 2-31: Live streaming and control based on web services
- IEC-62676-2-32 - Video surveillance systems for use in security applications - Part 2-32: Recording control and replay based on web services
- IEC-62676-2-33 - Video surveillance systems for use in security applications - Part 2-33: Video transmission protocols . Cloud uplink and remote management system access
- IEC-62676-3 - Video surveillance systems for use in security applications - Part 3: Analog and digital video interfaces
- IEC-62676-4 - Video surveillance systems for use in security applications - Part 4: Application guidelines
- IEC-62676-5 - Video surveillance systems for use in security applications - Part 5: Data specifications and image quality performance for camera devices
- IEC-62682 - Management of alarm systems for the process industries
- IEC-62682 CMV - Management of alarm systems for the process industries
- IEC-62820-1-1 - Building intercom systems - Part 1-1: System requirements - General
- IEC-62820-1-2 - Building intercom systems - Part 1-2: System requirements - Building intercom systems using the internet protocol (IP)
- IEC-62820-2 - Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS)
- IEC-62820-3-1 - Building intercom systems - Part 3-1: Application guidelines - General
- IEC-62820-3-2 - Building intercom systems - Part 3-2: Application guidelines - Advanced security building intercom systems (ASBIS)
- IEC-62851-1 - Alarm and electronic security systems - Social alarm systems - Part 1: System requirements
- IEC-62851-2 - Alarm and electronic security systems - Social alarm systems - Part 2: Trigger devices
- IEC-62851-3 - Alarm and electronic security systems - Social alarm systems - Part 3: Local unit and controller
- IEC-62851-5 - Alarm and electronic security systems - Social alarm systems - Part 5: Interconnections and communications
- IEC-839-10-1 - Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger cars
- IEC-839-5-1 - Alarm systems - Part 5: Requirements for alarm transmission systems - Section 1: General requirements for systems
- IEC-839-5-2 - Alarm systems - Part 5: Requirements for alarm transmission systems - Section 2: General requirements for equipment
- IEC-839-5-4 - Alarm systems - Part 5: Requirements for alarm transmission systems - Section 4: Alarm transmission systems using dedicated alarm transmission paths
- IEC-839-5-5 - Alarm systems - Part 5: Requirements for alarm transmission systems - Section 5: Requirements for digital communicator systems using the public switched telephone network
- IEC-839-5-6 - Alarm systems - Part 5: Requirements for alarm transmission systems - Section 6: Requirements for voice communicator systems using the public switched telephone network
ISO:
- ISO-11428 - Ergonomics - Visual danger signals - General requirements, design and testing
- ISO-11429 - Ergonomics - System of auditory and visual danger and information signals
- ISO-13475-1 - Acoustics -- Stationary audible warning devices used outdoors -- Part 1: Field measurements for determination of sound emission quantities
- ISO-13475-2 - Acoustics -- Stationary audible warning devices used outdoors -- Part 2: Precision methods for determination of sound emission quantities
- ISO-7731 - Ergonomics - Danger signals for public and work areas - Auditory danger signals
- ISO-8201 - Acoustics - Audible and other emergency evacuation signals
Other SDOs:
- DIN-EN-12259-2/A2 - Amendment 2 for Din-En-12259-2, Fixed Firefighting Systems - Componenets for Sprinkler
- DIN-EN-12259-3/A2 - Amendment 3 for Din-En-12259-3, Fixed Firefighting Systems - Components for Sprinkler
- DIN-EN-14604 - Smoke Alarm Devices
- DIN-EN-60079-29-1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases (IEC 60079-29-1:2016, modified); German version EN 60079-29-1:2016
- DIN-EN-ISO-7731 - Ergonomics - Danger Signals for Public & Work Areas - Auditory Danger Signals
- DS-EN-50132-7 - Alarm systems - CCTV surveillance systems for use in security applications - Part 7: Application guidelines
- EN-12259-2/A2 - Fixed Firefighting Systems - Components for Sprinkler and Water Spray Systems - Part 2:
- EN-12259-3/A2 - Fixed Firefighting Systems - Components for Sprinkler and Water Spray Systems - Part 3:
- EN-12613 - Plastics Warning Devices for Underground Cables & Pipelines With Visual Characteristi
- EN-14604 - Smoke Alarm Devices
- EN-15327-1 - Part 1: General Requirements & Passenger Interface for the Passenger Emergency Brake S
- EN-16280 - Breath alcohol test devices for general public - Requirements and test methods
- EN-16334 - Railway applications - Passenger Alarm System - System requirements
- EN-16683 - Railway applications - Call for aid and communication device - Requirements
- EN-45544-1 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods
- EN-45544-2 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for exposure measurement
- EN-45544-3 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for general gas detection
- EN-45544-4 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance
- EN-50130-4 - AAlarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems
- EN-50130-5 - Alarm systems - Part 5: Environmental test methods
- EN-50131-10 - Alarm systems - Intrusion and hold-up systems - Part 10: Application specific requirements for Supervised Premises Transceiver (SPT)
- EN-50131-2-10 - Alarm systems - Intrusion and hold-up systems - Part 2-10: Intrusion detectors - Lock state contacts (magnetic)
- EN-50131-2-3 - Alarm Systems, Intrusion & Hold-Up Systems, Requirements for Microwave Detectors
- EN-50131-2-5 - Alarm Systems, Intrusion & Hold-Up Systems, Requirements for Combined Passive Infrared
- EN-50131-2-6 - Alarm Systems, Intrusion & Hold-Up Systems, Opening Contacts (Magnetic)
- EN-50131-2-7-1 - Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)
- EN-50131-2-7-2 - Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive)
- EN-50131-2-7-3 - Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active)
- EN-50131-4 - Part 4: Warning Devices, Alarm Systems - Intrusion & Hold-Up Systems
- EN-50131-8 - Part 8: Security Fog Device/Systems, Alarm Systems - Intrusion & Hold-Up Systems
- EN-50132-1 - Part 1: System Requirements, Alarm Systems - Cctv Surveillance Systems for Use in Secu
- EN-50133-2-1 - Alarm Systems, Access Control Systems for Use in Security Applications, General Requir
- EN-50133-7 - Alarm Systems, Access Control Systems for Use in Security Applications, Application Gu
- EN-50134-2 - Alarm Systems, Social Alarm Systems, Trigger Devices
- EN-50134-3 - Alarm systems - Social alarm systems - Part 3: Local unit and controller
- EN-50134-7 - Alarm systems - Social alarm systems - Part 7: Application guidelines
- EN-50136-1 - Alarm systems - Alarm transmission systems and equipment - Part 1: General requirements for alarm transmission systems
- EN-50136-1-4 - Alarm Systems, Alarm Transmission Systems & Equipment, Requirements for Systems With V
- EN-50136-1-5 - Alarm Systems, Alarm Transmission Systems & Equipment, Requirements for Packet Switche
- EN-50136-2 - Alarm systems - Alarm transmission systems and equipment - Part 2: Requirements for Supervised Premises Transceiver (SPT)
- EN-50136-3 - Alarm systems - Alarm transmission systems and equipment - Part 3: Requirements for Receiving Centre Transceiver (RCT)
- EN-50194-1 - Electrical Apparatus for the Detection of Combustible Gases in Domestic Premises, Tes
- EN-50194-2 - Electrical apparatus for the detection of combustible gases in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requirements
- EN-50244 - Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance
- EN-50270 - Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
- EN-50291-1 - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements
- EN-50292 - Electrical apparatus for the detection of carbon monoxide in domestic premises, caravans and boats - Guide on the selection, installation, use and maintenance
- EN-50379-1 - Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods
- EN-50379-2 - Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 2: Performance requirements for apparatus used in statutory inspections and assessment
- EN-50379-3 - Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 3: Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances
- EN-50398-1 - Alarm systems - Combined and integrated alarm systems - Part 1: General requirements
- EN-50402 - Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems
- EN-50518-1 - Monitoring and alarm receiving centre - Part 1: Location and construction requirements
- EN-50518-2 - Monitoring and alarm receiving centre - Part 2: Technical requirements
- EN-50518-3 - Monitoring and alarm receiving centre - Part 3: Procedures and requirements for operation
- EN-50543 - Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods
- EN-50849 - Sound systems for emergency purposes
- EN-60079-29-1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
- EN-60079-29-4 - Part 29-4: Gas Detectors - Performance Requirements of Open Path Detectors for Flamma
- EN-60839-11-1 - Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements
- EN-60839-11-2 - Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines
- EN-60839-11-31 - Alarm and electronic security systems - Part 11-31: Electronic access control systems - Core interoperability protocol based on Web services
- EN-60839-11-32 - Alarm and electronic security systems - Part 11-32: Electronic access control systems - Access control monitoring based on Web services
- EN-62676-1-1 - Video surveillance systems for use in security applications - Part 1-1: System requirements - General
- EN-62676-1-2 - Video surveillance systems for use in security applications - Part 1-2: System requirements GÇô Performance requirements for video transmission
- EN-62676-2-1 - Video surveillance systems for use in security applications - Part 2-1: Video transmission protocols - General requirements
- EN-62676-2-3 - Video surveillance systems for use in security applications - Part 2-3: Video transmission protocols - IP interoperability implementation based on Web services
- EN-62676-3 - Video surveillance systems for use in security applications - Part 3: Analog and digital video interfaces
- EN-62676-4 - Video surveillance systems for use in security applications - Part 4: Application guidelines
- EN-62682 - Management of alarms systems for the process industries
- EN-62820-1-1 - Building intercom systems - Part 1-1: System requirements - General
- EN-62820-1-2 - Building intercom system - Part 1-2: System requirements - Building intercom systems using the internet protocol (IP)
- EN-981 - Safety of Machinery - System of Auditory & Visual Danger & Information Signals
- EN-IEC-62820-2 - Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS)
- EN-IEC-62820-3-1 - Building intercom systems - Part 3-1: Application guidelines - General
- EN-IEC-62820-3-2 - Building intercom systems - Part 3-2: Application guidelines - Advanced security building intercom systems (ASBIS)
- EN-ISO-7731 - Ergonomics - Danger Signals for Public & Work Areas - Auditory Danger Signals
- JIS-S-0014 - Ergonomics -- Accessible design -- Sound pressure levels of auditory signals for consumer products
- JIS-S-0014/A1 - Amendment 1 for JIS-S-0014, Guidelines for the Elderly & People With Disabilities - Au
- SIS-CEN/TS-17470 - Service model for social care alarms
- SIS-ISO/TS-13475-2 - Acoustics - Stationary audible warning devices used outdoors - Part 2: Precision methods for determination of sound emission quantities (ISO/TS 13475-2:2000, IDT)
- SIS-TR-91101 - Digital social alarm - Social care alarm internet protocol (SCAIP) - Test specification
- SIS-TR-91102 - Digital social alarm - Social care alarm internet protocol (SCAIP) - Implementation guideline
- SS-31711 - Warning signals with sound and light
- SS-91100 - Digital social alarm - Social care alarm internet protocol (SCAIP) - Specification
- SS-EN-12613 - Plastics warning devices for underground cables and pipelines with visual characteristics
- SS-EN-14419 - District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Surveillance systems
- SS-EN-14604 - Smoke alarm devices
- SS-EN-15327-1 - Railway applications - Passenger alarm subsystem - Part 1: General requirements and passenger interface for the passenger emergency brake system
- SS-EN-16280 - Breath alcohol test devices for general public - Requirements and test methods
- SS-EN-16334 - Railway applications - Passenger Alarm System - System requirements
- SS-EN-16334-1 - Railway applications - Passenger Alarm System - Part 1: System requirements for mainline rail
- SS-EN-16334-2 - Railway applications - Passenger alarm system - Part 2: System requirements for urban rail
- SS-EN-16683 - Railway applications - Call for aid and communication device - Requirements
- SS-EN-17355 - Railway applications - Communication device for urban rail - System requirements
- SS-EN-45502-2-3 - Active implantable medical devices - Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems
- SS-EN-45544-1 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods
- SS-EN-45544-2 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for exposure measurement
- SS-EN-45544-3 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for general gas detection
- SS-EN-45544-4 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance
- SS-EN-50710 - Requirements for the provision of secure remote services for fire safety systems and security systems
- SS-EN-54-1 - Fire detection and fire alarm systems - Part 1: Introduction
- SS-EN-54-7 - Fire detection and fire alarm systems - Part 7: Smoke detectors - Point smoke detectors that operate using scattered light, transmitted light or ionization
- SS-EN-81-28 - Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote alarm on passenger and goods passenger lifts
- SS-EN-842 - Safety of machinery - Visual danger signals - General requirements, design and testing
- SS-EN-981 - Safety of machinery - System of auditory and visual danger and information signals
- SS-EN-ISO-7731 - Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
- SS-ISO-13475-1 - Acoustics - Stationary audible warning devices used outdoors - Part 1: Field Measurements for determination of sound emission quantities
- SS-ISO-13950 - Plastics pipes and fittings - Automatic recognition systems for electrofusion joints (ISO 13950:2007, IDT)
- UNE-EN-16683 - Railway applications - Call for aid and communication device - Requirements