Document Center List of Standards on Welding Consumables Including Electrodes, Filler Metals, Gases, Etc.
ICS Code 25.160.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
BSI:
- BS-1453 - Specification for filler materials for gas welding
- BS-2493 - Specification for low alloy steel electrodes for manual metal-arc welding
- BS-2901-1 - Filler Rods & Wires for Gas-Shielded Arc Welding, Ferritic Steels
- BS-2901-2 - Specification for Stainless Steels, Filler Rods & Wires FORGAS-Shielded Arc Welding
- BS-2901-3 - Filler Rods & Wires for Gas-Shielded Arc Welding, Specification for Copper & Copper Al
- BS-2901-4 - Filler rods and wires for gas-shielded arc welding. Specification for aluminium and aluminium alloys and magnesium alloys
- BS-2901-5 - Part 5: Specification for Nickel & Nickel Alloys, Filler Rods & Wires for Gas-Shielded Arc
- BS-2926 - Specification for chromium and chromium-nickel steel electrodes for manual metal-arc welding
- BS-4129 - Specification for welding primers and weld-through sealants, adhesives and waxes for resistance welding of sheet steel
- BS-4165 - Specification for electrode wires and fluxes for the submerged arc welding of carbon steel and medium-tensile steel
- BS-4215 - Resistance Spot Welding Electrodes, Electrode Holders and Ancillary Equipment
- BS-4215-11 - Resistance spot welding electrodes, electrode holders and ancillary equipment. Specification for electrode holders, taper fixing 1:10
- BS-4215-12 - Resistance spot welding electrodes, electrode holders and ancillary equipment. Specification for electrode holders, Morse taper fixing
- BS-4215-13 - Resistance spot welding electrodes, electrode holders and ancillary equipment. Specification for electrode holders, parallel shank fixing for end thrust
- BS-4215-2 - Resistance spot welding electrodes, electrode holders and ancillary equipment
- BS-4215-6 - Resistance spot welding electrodes, electrode holders and ancillary equipment
- BS-4215-7 - Resistance spot welding electrodes, electrode holders and ancillary equipment
- BS-4577 - Specification for Materials for Resistance Welding Electrodes & Ancillary Equipment
- BS-5465 - Specification for electrodes and fluxes for the submerged arc welding of austenitic stainless steels
- BS-6693-1 - Diffusible hydrogen. Method for determination of hydrogen in manual metal-arc weld metal using 3 day collection
- BS-6693-2 - Diffusible hydrogen. Method for determination of hydrogen in manual metal-arc weld metal
- BS-6693-3 - Diffusible hydrogen. Primary method for the determination of diffusible hydrogen in manual metal-arc ferritic steel weld metal
- BS-6693-4 - Diffusible hydrogen. Primary method for the determination of diffusible hydrogen in submerged-arc ferritic steel weld metal
- BS-6693-5 - Diffusible hydrogen. Primary method for the determination of diffusible hydrogen in MIG, MAG, TIG or cored electrode ferritic steel weld metal
- BS-7084 - Carbon & Carbon-Manganese Steel Tubular Cored Welding Electrodes, Specification For
- BS-807 - Specification for spot welding electrodes
- BS-EN-12070 - Welding consumables. Wire electrodes, wires and rods for arc welding of creep-resisting steels. Classification
- BS-EN-12071 - Welding consumables. Tubular electrodes for gas shielded metal arc welding of creep-resisting steels. Classification
- BS-EN-12072 - Classification, Wire Electrodes, Wires & Rods for Arc Welding of Stainless & Heat-Resi
- BS-EN-12073 - Welding Consumables, Tubular Cored Electrodes for Metal Arc Welding With or Without A
- BS-EN-12074 - Welding consumables. Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes
- BS-EN-12534 - Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels. Classification
- BS-EN-12535 - Welding Consumables - Tubular Cored Electrodes for Gas Shieled Metal Arc Welding of Hi
- BS-EN-12536 - Welding consumables. Rods for gas welding of non alloy and creep-resisting steels. Classification
- BS-EN-12943 - Filler materials for thermoplastics. Scope, designation, requirements, tests
- BS-EN-13347 - Copper and copper alloys. Rod and wire for welding and braze welding
- BS-EN-13479 - Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials
- BS-EN-13479-TC - Tracked Changes. Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials
- BS-EN-14295 - Welding Consumables, Wire & Tubular Cored Electrodes & Electrode-Flux Combinations For
- BS-EN-14532-2 - Welding consumables. Test methods and quality requirements
- BS-EN-14532-3 - Welding consumables. Test methods and quality requirements
- BS-EN-14640 - Welding Consumables, Solid Wires & Rods for Fusion Welding of Copper & Copper Alloys,
- BS-EN-14700 - Welding consumables. Welding consumables for hard-facing
- BS-EN-1597-1 - Part 1: Test Piece for All-Weld Metal Test Specimens in Steel, Nickel & Nickel Alloys,
- BS-EN-1597-2 - Welding Consumables, Test Methods, Preparation of Test Piece for Single-Run & Two-Run
- BS-EN-1597-3 - Welding Consumables, Test Methods, Testing of Positional Capability of Welding Consuma
- BS-EN-1599 - Welding Consumables, Covered Electrodes for Manual Metal Arc Welding of Creep-Resistin
- BS-EN-1600 - Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat resisting steels. Classification
- BS-EN-1668 - Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels. Classification
- BS-EN-21089 - Electrode taper fits for spot welding equipment. Dimensions
- BS-EN-25184 - Straight resistance spot welding electrodes
- BS-EN-25827 - Specification for spot welding. Electrode back-ups and clamps
- BS-EN-26847 - Covered electrodes for manual metal arc welding. Deposition of a weld metal pad for chemical analysis
- BS-EN-26848 - Specification for tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding
- BS-EN-28167 - Specification for projections for resistance welding
- BS-EN-28430-1 - Specification for resistance spot welding. Electrode holders. Taper fixing 1:10
- BS-EN-28430-2 - Specification for resistance spot welding. Electrode holders. Morse taper fixing
- BS-EN-28430-3 - Specification for resistance spot welding. Electrode holders. Parallel shank fixing for end thrust
- BS-EN-3879 - Aerospace series. Metallic materials. Filler metal for welding. Technical specification
- BS-EN-439 - Welding Consumables - Shielding Gases for Arc Welding & Cutting
- BS-EN-440 - Welding Consumables. Wire Electrodes & Deposits for Gas Shielded Metal Arc Welding O
- BS-EN-4877-002 - Aerospace series. Filler metals for welding
- BS-EN-499 - Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classification
- BS-EN-756 - Welding Consumables, Solid Wires, Solid Wire-Flux & TUBULARELECTRODE-Flux Cominations
- BS-EN-757 - Welding consumables. Covered electrodes for manual metal arc welding of high strength steels. Classification
- BS-EN-758 - Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non-alloy and fine grain steels. Classification
- BS-EN-760 - Welding consumables. Fluxes for submerged arc welding. Classification
- BS-EN-ISO-1071 - Welding consumables. Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron. Classification
- BS-EN-ISO-1071-TC - Tracked Changes. Welding consumables. Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron. Classification
- BS-EN-ISO-12153 - Welding consumables. Tubular-cored electrodes for gas-shielded and non-gas-shielded metal arc welding of nickel and nickel alloys. Classification
- BS-EN-ISO-12153-TC - Tracked Changes. Welding consumables. Tubular-cored electrodes for gas-shielded and non-gas-shielded metal arc welding of nickel and nickel alloys. Classification
- BS-EN-ISO-12224-1 - Solder wire, solid and flux cored. Specification and test methods
- BS-EN-ISO-12224-2 - Solder wire, solid and flux cored. Specification and test methods
- BS-EN-ISO-14171 - Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification
- BS-EN-ISO-14171-TC - Tracked Changes. Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification
- BS-EN-ISO-14172 - Welding consumables. Covered electrodes for manual metal arc welding of nickel and nickel alloys. Classification
- BS-EN-ISO-14172-TC - Tracked Changes. Welding consumables. Covered electrodes for manual metal arc welding of nickel and nickel alloys. Classification
- BS-EN-ISO-14174 - Welding consumables. Fluxes for submerged arc welding and electroslag welding. Classification
- BS-EN-ISO-14175 - Welding consumables. Gases and gas mixtures for fusion welding and allied processes
- BS-EN-ISO-14341 - Welding consumables. Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
- BS-EN-ISO-14341-TC - Welding consumables. Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
- BS-EN-ISO-14343 - Welding consumables. Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels. Classification
- BS-EN-ISO-14372 - Welding consumables. Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
- BS-EN-ISO-15792-1 - Welding consumables. Test methods
- BS-EN-ISO-15792-2 - Welding consumables. Test methods
- BS-EN-ISO-15792-3 - Welding consumables. Test methods
- BS-EN-ISO-16834 - Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels. Classification
- BS-EN-ISO-17632 - Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels. Classification
- BS-EN-ISO-17632-TC - Tracked Changes. Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels. Classification
- BS-EN-ISO-17633 - Welding consumables. Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels. Classification
- BS-EN-ISO-17633-TC - Tracked Changes. Welding consumables. Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels. Classification
- BS-EN-ISO-17634 - Welding consumables. Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels. Classification
- BS-EN-ISO-17634-TC - Tracked Changes. Welding consumables. Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels. Classification
- BS-EN-ISO-17777 - Welding consumables. Covered electrodes for manual metal arc welding of copper and copper alloys. Classification
- BS-EN-ISO-18273 - Welding consumables. Wire electrodes, wires and rods for welding of aluminium and aluminium alloys. Classification
- BS-EN-ISO-18273-TC - Tracked Changes. Welding consumables. Wire electrodes, wires and rods for welding of aluminium and aluminium alloys. Classification
- BS-EN-ISO-18274 - Welding consumables. Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. Classification
- BS-EN-ISO-18275 - Welding consumables. Covered electrodes for manual metal arc welding of high-strength steels. Classification
- BS-EN-ISO-18275-TC - Tracked Changes. Welding consumables. Covered electrodes for manual metal arc welding of high-strength steels. Classification
- BS-EN-ISO-18276 - Welding consumables. Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels. Classification
- BS-EN-ISO-18276-TC - Tracked Changes. Welding consumables. Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels. Classification
- BS-EN-ISO-19288 - Welding consumables. Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys. Classification
- BS-EN-ISO-20168 - Resistance welding. Locking tapers for electrode holders and electrode caps
- BS-EN-ISO-20378 - Welding consumables. Rods for gas welding of non-alloy and creep-resisting steels. Classification
- BS-EN-ISO-21952 - Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels. Classification
- BS-EN-ISO-24034 - Welding consumables. Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. Classification
- BS-EN-ISO-24373 - Welding consumables. Solid wires and rods for fusion welding of copper and copper alloys. Classification
- BS-EN-ISO-24598 - Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels. Classification
- BS-EN-ISO-2560 - Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification
- BS-EN-ISO-2560-TC - Tracked Changes. Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification
- BS-EN-ISO-26304 - Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2017)
- BS-EN-ISO-26304-TC - Tracked Changes. Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2017)
- BS-EN-ISO-3580 - Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification
- BS-EN-ISO-3580-TC - Tracked Changes. Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification
- BS-EN-ISO-3581 - Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat-resisting steels. Classification
- BS-EN-ISO-5182 - Resistance welding. Materials for electrodes and ancillary equipment
- BS-EN-ISO-5182-TC - Tracked Changes. Resistance welding. Materials for electrodes and ancillary equipment
- BS-EN-ISO-5183-1 - Resistance welding equipment. Electrode adaptors, male taper 1:10. Conical fixing, taper 1:10
- BS-EN-ISO-544 - Welding consumables. Technical delivery conditions for filler materials and fluxes. Type of product, dimensions, tolerances and markings
- BS-EN-ISO-544-TC - Tracked Changes. Welding consumables. Technical delivery conditions for filler materials and fluxes. Type of product, dimensions, tolerances and markings
- BS-EN-ISO-636 - Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification
- BS-EN-ISO-636-TC - Tracked Changes. Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification
- BS-EN-ISO-6847 - Welding consumables. Deposition of a weld metal pad for chemical analysis
- BS-EN-ISO-6848 - Arc welding and cutting. Nonconsumable tungsten electrodes. Classification
- BS-EN-ISO-6848-TC - Tracked Changes. Arc welding and cutting. Nonconsumable tungsten electrodes. Classification
- BS-EN-ISO-8166 - Resistance welding. Procedure for the evaluation of the life of spot welding electrodes using constant machine settings
- BS-EN-ISO-8167 - Resistance welding. Embossed projection welding. Projections for resistance welding
- BS-EN-ISO-8167-TC - Tracked Changes. Resistance welding. Embossed projection welding. Projections for resistance welding
- BS-EN-ISO-8249 - Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
- BS-EN-ISO-8249-TC - Tracked Changes. Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
- BS-EN-ISO-8430-3 - Resistance spot welding. Electrode holders
- BS-EN-ISO-9455-2 - Soft soldering fluxes. Test methods
- BS-EN-ISO-9455-3 - Soft soldering fluxes. Test methods
- BS-EN-ISO-9455-9 - Soft soldering fluxes. Test methods
- BS-EN-ISO-9539 - Gas welding equipment. Materials for equipment used in gas welding, cutting and allied processes
- BS-ISO-20168 - Resistance welding. Locking tapers for electrode holders and electrode caps
- BS-ISO-20378 - Welding consumables. Rods for gas welding of non-alloy and creep-resisting steels. Classification
- BS-ISO-5182 - Resistance Welding, Materials for Electrodes & Ancillary Equipment
- PD-CEN-ISO-20172 - Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
- PD-CEN-ISO-20172-TC - Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
- PD-CEN-ISO-20173 - Welding. Grouping systems for materials. American materials
- PD-CEN-ISO-20173-TC - Tracked Changes. Welding. Grouping systems for materials. American materials
- PD-CEN-ISO-20174 - Welding. Grouping systems for materials. Japanese materials
- PD-ISO-22281 - Welding consumables. International Institute of Welding (IIW) position statement on the use of trace element analyses in welding consumable specifications
- PD-ISO-23413 - Resistance welding. Overview of standards for resistance welding
IEC:
- IEC-60245-1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
- IEC-60245-1-1 - Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
ISO:
- ISO-1071 - Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification
- ISO-12153 - Welding consumables - Tubular-cored electrodes for gas-shielded and non-gas-shielded metal arc welding of nickel and nickel alloys - Classification
- ISO-13393 - Welding consumables - Hardfacing classification - Microstructures
- ISO-14171 - Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification
- ISO-14172 - Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification
- ISO-14174 - Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification
- ISO-14175 - Welding consumables - Gases and gas mixtures for fusion welding and allied processes
- ISO-14341 - Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification
- ISO-14343 - Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification
- ISO-14343-1 - Amendment 1: Addition of Strip Electrodes for Submerged Arc Welding & Electroslag Wel
- ISO-14372 - Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
- ISO-15792-1 - Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys
- ISO-15792-1-AM1 - Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys - Amendment 1
- ISO-15792-2 - Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel
- ISO-15792-3 - Welding consumables - Test methods - Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld
- ISO-16834 - Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification
- ISO-17632 - Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification
- ISO-17633 - Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification
- ISO-17633-AM1 - - Amendment 1
- ISO-17634 - Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification
- ISO-17777 - Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification
- ISO-18273 - Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification
- ISO-18274 - Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification
- ISO-18275 - Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification
- ISO-18276 - Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification
- ISO-19288 - Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification
- ISO-20168 - Resistance welding - Locking tapers for electrode holders and electrode caps
- ISO-20172 - Welding - Grouping systems for materials - European materials
- ISO-20173 - Welding - Grouping systems for materials - American materials
- ISO-20174 - Welding - Grouping systems for materials - Japanese materials
- ISO-20378 - Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification
- ISO-21952 - Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels - Classification
- ISO-22281 - Welding consumables - International Institute of Welding (IIW) position statement on the use of trace element analyses in welding consumable specifications
- ISO-23413 - Resistance welding - Overview of standards for resistance welding
- ISO-2401 - Welding consumables - Covered electrodes - Determination of the efficiency, metal recovery and deposition coefficient
- ISO-24034 - Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification
- ISO-24034-1 - Amendment 1: Welding Consumables - Solid Wires & Rods for Fusion Welding of Titanium &
- ISO-24373 - Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification
- ISO-24598 - Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification
- ISO-2560 - Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification
- ISO-26304 - Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification
- ISO-3580 - Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification
- ISO-3581 - Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification
- ISO-3581-AM1 - Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification - Amendment 1
- ISO-5182 - Resistance welding - Materials for electrodes and ancillary equipment
- ISO-5184 - Straight resistance spot welding electrodes
- ISO-544 - Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings
- ISO-636 - Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification
- ISO-6847 - Welding consumables - Deposition of a weld metal pad for chemical analysis
- ISO-6848 - Arc welding and cutting - Nonconsumable tungsten electrodes - Classification
Other SDOs:
- CEN-ISO-20173 - Welding - Grouping systems for materials - American material
- DIN-EN-13479 - Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials; German version EN 13479:2017
- DIN-EN-14532-1 - Part 1: Primary Methods & Conformity Assessment of Consumables for Steel, Nickel & Nic
- DIN-EN-14532-2 - Part 2: Supplementary Methods & Conformity Assessment of Consumables for Steel, Nickel
- DIN-EN-14532-3 - Part 3: Conformity Assessment of Wire Electrodes, Wires & Rods for Welding of Aluminiu
- DIN-EN-14640 - Welding Consumables, Solid Wires & Rods for Fusion Welding of Copper & Copper Alloys,
- DIN-EN-14700 - Welding consumables - Welding consumables for hard-facing; German version EN 14700:2014
- DIN-EN-756 - Welding consumables - Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification
- DIN-EN-ISO-1071 - Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification
- DIN-EN-ISO-14172 - Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification
- DIN-EN-ISO-14343 - Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification
- DIN-EN-ISO-14344 - Welding Consumables - Procurement of Filler Materials & Fluxes
- DIN-EN-ISO-16834 - Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)
- DIN-EN-ISO-17633 - Welding Consumables - Tubular Cored Electrodes & Rods for Gas Shielded Metal Arc Weldi
- DIN-EN-ISO-17634 - Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification
- DIN-EN-ISO-18273 - Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification
- DIN-EN-ISO-18274 - Welding Consumables - Solid Wire Electrodes, Solid Strip Electrodes, Solid Wires & Sol
- DIN-EN-ISO-18276 - Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification
- DIN-EN-ISO-24034 - Welding Consumables - Solid Wire Electrodes, Solid Wires & Rods for Fusion Welding Of
- DIN-EN-ISO-2560 - Welding Consumables - Covered Electrodes for Manual Metal Arc Welding of Non-Alloy & F
- DIN-EN-ISO-544 - Welding Consumables - Technical Delivery Conditions for Filler Materials & Fluxes - Ty
- DIN-EN-ISO-6847 - Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2013)
- DIN-EN-ISO-6848 - Arc welding and cutting - Nonconsumable tungsten electrodes - Classification
- EN-12070 - Wire Electrodes, Wires & Rods for Arc Welding of Creep-Resisting Steels, Welding Consu
- EN-12071 - Welding Consumables, Tubular Electrodes for Gas Shielded Metal Arc Welding of Creep-Re
- EN-12073 - Welding Consumables, Tubular Cored Electrodes for Metal Arc Welding With or Without A
- EN-12943 - Filler Materials for Thermoplastics, Scope, Designation, Requirements, Tests
- EN-13347 - Copper & Copper Alloys, Rod & Wire for Welding & Braze Welding
- EN-13479 - Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
- EN-14532-1 - Part 1: Primary Methods & Conformity Assessment of Consumables for Steel, Nickel & Nic
- EN-14532-2 - Part 2: Supplementary Methods & Conformity Assessment of Consumables for Steel, Nickel
- EN-14532-3 - Part 3: Conformity Assessment of Wire Electrodes, Wires & Rods for Welding of Aluminiu
- EN-14640 - Welding Consumables, Solid Wires & Rods for Fusion Welding of Copper & Copper Alloys,
- EN-14700 - Welding consumables - Welding consumables for hard-facing
- EN-1597-2 - Welding Consumables, Test Methods, Preparation of Test Piece for Single-Run & Two-Run
- EN-1599 - Welding Consumables, Covered Electrodes for Manual Metal Arcwelding of Creep-Resisting
- EN-1600 - Covered Electrodes for Manual Metal Arc Welding of Stainless& Heat Resisting Steels, C
- EN-21089 - Electrode Taper Fits for Spot Welding Equipment, Dimensions
- EN-25184 - Straight Resistance Spot Welding Electrodes
- EN-25827 - Specification for Spot Welding, Electrode Back-Ups & Clamps
- EN-28167 - Projections for Resistance Welding
- EN-28430-1 - Resistance Spot Welding, Electrode Holders, Taper Fixing 1 :10
- EN-28430-3 - Parallel Shank Fixing for End Thrust, Resistance Spot Welding, Electrode Holders
- EN-757 - Welding Consumables, Covered Electrodes for Manual Metal Arc Welding of High Strength
- EN-ISO-1071 - Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification
- EN-ISO-12153 - Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys - Classification (ISO 12153:2011)
- EN-ISO-14171 - Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification
- EN-ISO-14172 - Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification
- EN-ISO-14174 - Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2012)
- EN-ISO-14175 - Welding Consumables, Gases & Gas Mixtures for Fusion Welding & Allied Processes
- EN-ISO-14341 - Welding Consumables - Wire Electrodes & Weld Deposits for Gas Shielded Metal Arc Weldi
- EN-ISO-14343 - Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification
- EN-ISO-14372 - Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
- EN-ISO-15792-1 - Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys
- EN-ISO-15792-2 - Part 2: Preparation of Single-Run & Two-Run Technique Test Specimens in Steel, Welding
- EN-ISO-15792-3 - Welding Consumables, Test Methods, Classification Testing of Positional Capacity & Roo
- EN-ISO-16834 - Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)
- EN-ISO-17632 - Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification
- EN-ISO-17633 - Welding Consumables - Tubular Cored Electrodes & Rods for Gas Shielded Metal Arc Weldi
- EN-ISO-17634 - Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification
- EN-ISO-17777 - Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification
- EN-ISO-18273 - Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification
- EN-ISO-18274 - Welding Consumables - Solid Wire Electrodes, Solid Strip Electrodes, Solid Wires & Sol
- EN-ISO-18275 - Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification (ISO 18275:2011)
- EN-ISO-18276 - Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification
- EN-ISO-19288 - Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification
- EN-ISO-21952 - Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels - Classification (ISO 21952:2012)
- EN-ISO-2401 - Welding consumables - Covered electrodes - Determination of the efficiency, metal recovery and deposition coefficien
- EN-ISO-24034 - Welding Consumables - Solid Wire Electrodes, Solid Wires & Rods for Fusion Welding Of
- EN-ISO-24373 - Welding Consumables - Solid Wires & Rods for Fusion Welding of Copper & Copper Alloys
- EN-ISO-24598 - Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2012)
- EN-ISO-2560 - Welding Consumables - Covered Electrodes for Manual Metal Arc Welding of Non-Alloy & F
- EN-ISO-26304 - Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification
- EN-ISO-3580 - Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification
- EN-ISO-3581 - Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification
- EN-ISO-5182 - Resistance welding - Materials for electrodes and ancillary equipment
- EN-ISO-5183-1 - Part 1: Conical Fixing, Taper 1:10, Resistance Welding Equipment - Electrode Adaptors,
- EN-ISO-544 - Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings
- EN-ISO-636 - Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification
- EN-ISO-6847 - Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2013)
- EN-ISO-6848 - Arc welding and cutting - Nonconsumable tungsten electrodes - Classification
- EN-ISO-9539 - Gas Welding Equipment - Materials for Equipment Used in Gas Welding, Cutting & Allied
- JIS-Z-3184 - Method of preparing deposited metal pad and samples for chemical analysis
- JIS-Z-3221 - Stainless steel covered electrodes
- JIS-Z-3227 - Austenitic stainless steel covered electrodes for cryogenic service
- JIS-Z-3232 - Aluminium and aluminium alloy welding rods and wires
- JIS-Z-3253 - Shielding gases for fusion welding and thermal cutting
- JIS-Z-3312 - Solid wires for MAG and MIG welding of mild steel, high strength steel and low temperature service steel
- JIS-Z-3313 - Flux cored wires for gas shielded and self-shielded metal arc welding of mild steel, high strength steel and low temperature service steel
- JIS-Z-3316 - Solid wires and rods for TIG welding of mild steel, high strength steel and low temperature service steel
- JIS-Z-3317 - Solid wire electrodes, wires and rods for gas-shielded arc welding of molybdenum steel and chromium molybdenum steel
- JIS-Z-3321 - Stainless steel rods, wires and strip electrodes for welding
- JIS-Z-3322 - Classification and testing methods for weld metal of stainless steel overlay welding with strip electrode
- JIS-Z-3323 - Stainless steel flux cored wires and rods for arc welding
- JIS-Z-3331 - Welding rods and solid wires for welding of titanium and titanium alloys
- JIS-Z-3334 - Rods, solid wires and strip electrodes for welding of nickel and nickel-alloy
- JIS-Z-3352 - Fluxes for submerged arc welding and electroslag welding
- MNC-974 - Svetselektroder - Belagda elektroder f"r manuell metallb+gsvetsning av varmh+llfast l+glegerat st+l- Tversikt
- MNC-976 - Svetselektroder - Belagda elektroder f"r manuell metallb+gsvetsning av rostfritt st+l - Tversikt
- MNC-983 - Consumables - Wire electrodes and fluxes for submerged-arc welding of carbon steels, carbon-manganese steels and microalloyed steels - Summary
- MNC-986 - Tillsatsmaterial - Stavar, tr+d och tr+delektroder f"r b+gsvetsning av rostfritt st+l - Tversikt
- SIS-CEN-ISO/TR-20172 - Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
- SIS-CEN-ISO/TR-20173 - Welding - Grouping systems for materials - American materials (ISO/TR 20173:2018)
- SIS-CEN-ISO/TR-20174 - Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2005)
- SS-60521 - Welding electrodes - Wire electrodes and tubular wires for gas metal arc welding and metal arc welding - Standard dimensions for electrodes and spools
- SS-EN-12070 - Welding consumables - Wire electrodes, wires and rods for arc welding of creep-resisting steels - Classification
- SS-EN-12071 - Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification
- SS-EN-12072 - Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels - Classification
- SS-EN-12073 - Welding consumables - Tubular cored electrodes for metal arc welding with or without a gas shield of stainless and heat-resisting steels - Classification
- SS-EN-12074 - Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes
- SS-EN-12534 - Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels - Classification
- SS-EN-12535 - Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels - Classification
- SS-EN-12536 - Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification
- SS-EN-12943 - Filler materials for thermoplastics - Scope, designation, requirements, tests
- SS-EN-13170 - Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
- SS-EN-13347 - Copper and copper alloys - Rod and wire for welding and braze welding
- SS-EN-13479 - Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
- SS-EN-14295 - Welding consumables - Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification
- SS-EN-14532-1 - Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
- SS-EN-14532-2 - Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys
- SS-EN-14532-3 - Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
- SS-EN-14640 - Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification
- SS-EN-14700 - Welding consumables - Welding consumables for hard-facing
- SS-EN-1597-1 - Welding consumables - Test methods - Part 1: Testpeice for all-weld metal test specimens in steel,nickel and nickel alloys
- SS-EN-1597-2 - Welding consumables - Test methods - Part 2: Preparation of test piece for singe-run and two-run technique test specimens in steel
- SS-EN-1597-3 - Welding consumables - Test methods - Part 3: Testing of positional capability of welding consumables in a filled weld
- SS-EN-1599 - Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification
- SS-EN-1600 - Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels - Classification
- SS-EN-1668 - Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and finegrain steels - Classification
- SS-EN-20544 - Tillsatsmaterial f"r manuell svetsning - Storlekskrav
- SS-EN-20693 - Concrete. Specification, performance, production and conformity
- SS-EN-21089 - Electrode taper fits for spot welding equipment -Dimensions
- SS-EN-22401 - Covered electrodes - Determination of the efficiency, metal recovery and desposition coefficient (ISO 2401:1972)
- SS-EN-26848 - Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and welding - Codification
- SS-EN-28430-1 - Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10
- SS-EN-28430-2 - Resistance spot welding - Electrode holders - Part 2: Morse taper fixing
- SS-EN-28430-3 - Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust
- SS-EN-288-5 - Specification and approval of welding procedures for metallic materials - Part 5: Approval by usingapproved welding consumables for arc welding
- SS-EN-29313 - Resistance spot welding equipment - Cooling tubes
- SS-EN-439 - Welding consumables - Shielding gases for arc welding and cutting
- SS-EN-440 - Welding consumables - Wire electrodes and deposits for gas - Shielded metal arc welding of non alloy and fine grain steels - Classification
- SS-EN-499 - Welding consumables - Covered electrodes for manual metal arc welding of non alloy and fine grain steels - Classification
- SS-EN-756 - Welding consumables - Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification
- SS-EN-757 - Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification
- SS-EN-758 - Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels - Classification
- SS-EN-760 - Welding consumables - Fluxes for submerged arc welding - Classification
- SS-EN-ISO-1071 - Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2015)
- SS-EN-ISO-12153 - Welding consumables - Tubular-cored electrodes for gas-shielded and non-gas-shielded metal arc welding of nickel and nickel alloys - Classification (ISO 12153:2022)
- SS-EN-ISO-12224-2 - Flux cored solder wire - Specification and test methods - Part 2: Determination of flux content (ISO 12224-2:1997)
- SS-EN-ISO-13918 - Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017)
- SS-EN-ISO-14171 - Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016)
- SS-EN-ISO-14172 - Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015)
- SS-EN-ISO-14174 - Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification
- SS-EN-ISO-14175 - Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)
- SS-EN-ISO-14341 - Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2020)
- SS-EN-ISO-14343 - Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2017)
- SS-EN-ISO-14344 - Welding consumables - Procurement of filler materials and fluxes (ISO 14344:2010)
- SS-EN-ISO-14372 - Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2011)
- SS-EN-ISO-15792-1 - Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020)
- SS-EN-ISO-15792-1-AM1 - Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys (ISO 15792-1:2000/Amd 1:2011)
- SS-EN-ISO-15792-2 - Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)
- SS-EN-ISO-15792-3 - Welding consumables - Test methods - Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld (ISO 15792-3:2011)
- SS-EN-ISO-16834 - Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)
- SS-EN-ISO-17632 - Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015)
- SS-EN-ISO-17633 - Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2017)
- SS-EN-ISO-17633-AM1 - Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification - Amendment 1 (ISO 17633:2017/Amd 1:2021)
- SS-EN-ISO-17634 - Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015)
- SS-EN-ISO-17777 - Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification (ISO 17777:2016)
- SS-EN-ISO-18273 - Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO 18273:2015)
- SS-EN-ISO-18274 - Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2010)
- SS-EN-ISO-18275 - Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification (ISO 18275:2018)
- SS-EN-ISO-18276 - Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017)
- SS-EN-ISO-19288 - Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification (ISO 19288:2016)
- SS-EN-ISO-20378 - Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification (ISO 20378:2017)
- SS-EN-ISO-21952 - Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels - Classification (ISO 21952:2012)
- SS-EN-ISO-2401 - Welding consumables - Covered electrodes - Determination of the efficiency, metal recovery and deposition coefficient (ISO 2401:2018)
- SS-EN-ISO-24034 - Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020)
- SS-EN-ISO-24034-AM1 - Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2005/Amd 1:2008)
- SS-EN-ISO-24373 - Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO 24373:2018)
- SS-EN-ISO-24598 - Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2019)
- SS-EN-ISO-2560 - Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2020)
- SS-EN-ISO-26304 - Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2017)
- SS-EN-ISO-3580 - Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification (ISO 3580:2017)
- SS-EN-ISO-3581 - Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2016)
- SS-EN-ISO-3677 - Filler metal for soldering and brazing - Designation (ISO 3677:2016)
- SS-EN-ISO-5182 - Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016)
- SS-EN-ISO-544 - Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2017)
- SS-EN-ISO-636 - Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017)
- SS-EN-ISO-6847 - Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2020)
- SS-EN-ISO-6848 - Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015)
- SS-EN-ISO-8166 - Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machine settings (ISO 8166:2003)
- SS-EN-ISO-8430-1 - Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016)
- SS-EN-ISO-8430-2 - Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016)
- SS-EN-ISO-8430-3 - Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016)
- SS-EN-ISO-8501-3 - Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO 8501-3:2006)
- SS-EN-ISO-9539 - Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010)
- SS-EN-ISO-9539-AM1 - Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes - Amendment 1 (ISO 9539:2010/Amd 1:2013)
- SS-ISO-1089 - Electrode taper fits for spot welding equipment -Dimensions
- SS-ISO-2401 - Covered electrodes - Determination of the efficiency, metal recovery and deposition coefficient
- SS-ISO-5182 - Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2008, IDT)
- SS-ISO-5183-1 - Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10
- SS-ISO-5183-2 - Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes
- SS-ISO-5184 - Straight resistance spot welding electrodes
- SS-ISO-5821 - Resistance spot welding electrode caps
- SS-ISO-5827 - Spot welding - Electrode back-ups and clamps
- SS-ISO-5829 - Resistance spot welding - Electrode adaptors, female taper 1:10
- SS-ISO-5830 - Resistance spot welding - Male electrode caps
- SS-ISO-6847 - Covered electrodes for manual metal arc welding -Deposition of a weld metal pad for chemical analysis
- SS-ISO-6848 - Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and welding - Codification
- SS-ISO-693 - Dimensions of seam welding wheel blanks
- SS-ISO-8430-1 - Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10
- SS-ISO-8430-2 - Resistance spot welding - Electrode holders - Part 2: Morse taper fixing
- SS-ISO-8430-3 - Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust
- SS-ISO-8501-3 - Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, cut edges and other areas with surface imperfections (ISO 8501-3:2006, IDT)
- UNE-EN-ISO-1071 - Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification
- UNE-EN-ISO-636 - Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification