Document Center List of Standards on Gas And Steam Turbines. Steam Engines Hydraulic Turbines, See 27.140
ICS Code 27.040
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D3483 - Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
- ASTM-D4378 - Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
- ASTM-E2071 - Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data
- ASTM-E2459 - Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
BSI:
- BS-1113 - Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers)
- BS-2885 - Code for Acceptance Tests on Stationary Steam Generators Ofthe Power Station Type
- BS-3135 - Specification for Gas Turbine Acceptance Test
- BS-EN-12952-1 - Water-tube boilers and auxiliary installations
- BS-EN-12952-10-TC - Tracked Changes. Water-tube boilers and auxiliary installations
- BS-EN-12952-11 - Water-tube boilers and auxiliary installations
- BS-EN-12952-16 - Water-tube boilers and auxiliary installations
- BS-EN-12952-18 - Water-tube boilers and auxiliary installations
- BS-EN-12952-1-TC - Tracked Changes. Water-tube boilers and auxiliary installations
- BS-EN-12952-2 - Water-tube boilers and auxiliary installations
- BS-EN-12952-3 - Water-tube boilers and auxiliary installations
- BS-EN-12952-4 - Water-tube boilers and auxiliary installations
- BS-EN-12952-5 - Water-tube boilers and auxiliary installations
- BS-EN-12952-6 - Water-tube boilers and auxiliary installations
- BS-EN-12952-6-TC - Tracked Changes. Water-tube boilers and auxiliary installations
- BS-EN-12952-7 - Water-tube boilers and auxiliary installations
- BS-EN-12952-9 - Water-tube boilers and auxiliary installations
- BS-EN-12952-9-TC - Tracked Changes. Water-tube boilers and auxiliary installations
- BS-EN-45510-5-1 - Guide for the procurement of power station equipment. Steam turbines
- BS-EN-45510-6-2 - Guide for the procurement of power station equipment. Turbine auxiliaries. Feedwater heaters
- BS-EN-45510-6-3 - Guide for the procurement of power station equipment. Turbine auxiliaries. Condenser plant
- BS-EN-45510-6-4 - Guide for the procurement of power station equipment. Turbine auxiliaries. Pumps
- BS-EN-45510-6-5 - Guide for the procurement of power station equipment. Turbine auxiliaries. Dry cooling systems
- BS-EN-45510-6-8 - Guide for the procurement of power station equipment. Turbine auxiliaries. Cranes
- BS-EN-45510-6-9 - Guide for the procurement of power station equipment. Turbine auxiliaries. Cooling water systems
- BS-EN-60953-3 - Rules for steam turbine thermal acceptance tests
- BS-EN-IEC-60045-1 - Steam turbines
- BS-EN-IEC-60953-0 - Rules for steam turbine thermal acceptance tests
- BS-EN-IEC-60953-0-TC - Tracked Changes. Rules for steam turbine thermal acceptance tests
- BS-EN-IEC-60953-3 - Rules for steam turbine thermal acceptance tests
- BS-EN-ISO-10437 - Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications
- BS-EN-ISO-21789 - Gas turbine applications Safety
- BS-EN-ISO-3977-5 - Gas turbines. Procurement
- BS-ISO-10816-2 - Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts
- BS-ISO-10816-4 - Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts
- BS-ISO-11042-1 - Gas turbines. Exhaust gas emission
- BS-ISO-11042-2 - Gas turbines. Exhaust gas emission
- BS-ISO-11086 - Gas turbines. Vocabulary
- BS-ISO-14661 - Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements
- BS-ISO-18888 - Gas turbine combined cycle power plants. Thermal performance tests
- BS-ISO-19372 - Microturbines applications. Safety
- BS-ISO-19859 - Gas turbine applications. Requirements for power generation
- BS-ISO-19860 - Gas turbines. Data acquisition and trend monitoring system requirements for gas turbine installations
- BS-ISO-20816-2 - Mechanical vibration. Measurement and evaluation of machine vibration
- BS-ISO-20816-4 - Mechanical vibration. Measurement and evaluation of machine vibration
- BS-ISO-21789 - Gas turbine applications Safety
- BS-ISO-21905 - Gas turbine exhaust systems with or without waste heat recovery
- BS-ISO-2314 - Gas turbines. Acceptance tests
- BS-ISO-26382 - Cogeneration systems. Technical declarations for planning, evaluation and procurement
- BS-ISO-3977-1 - Gas turbines. Procurement. General introduction and definitions
- BS-ISO-3977-2 - Gas turbines. Procurement
- BS-ISO-3977-2-TC - Tracked Changes. Gas turbines. Procurement
- BS-ISO-3977-3 - Gas turbines. Procurement
- BS-ISO-3977-4 - Gas turbines. Procurement
- BS-ISO-3977-7 - Gas turbines. Procurement
- BS-ISO-3977-8 - Gas turbines. Procurement
- BS-ISO-7919-2 - Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts
- BS-ISO-7919-4 - Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts
- DD-IEC-61370 - Steam turbines. Steam purity
- PD-IEC-63388 - Report on the development of cogeneration
IEC:
- IEC-1064 - Acceptance tests for steam turbine speed control systems
- IEC-45-1 - Steam turbines - Part 1: Specifications
- IEC-60953-0 - Rules for steam turbine thermal acceptance tests - Part 0: Wide range of accuracy for various types and sizes of turbines
- IEC-60953-3 - Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification tests of retrofitted steam turbines
- IEC-61370 - Steam turbines - Steam purity
- IEC-63388 - Report on the development of cogeneration
- IEC-953-1 - Rules for steam turbine thermal acceptance tests. Part 1: Method A - High accuracy for large condensing steam turbines
- IEC-953-2 - Rules for steam turbine thermal acceptance tests. Part 2: Method B - Wide range of accuracy for various types and sizes of turbines
ISO:
- ISO-10437 - Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications
- ISO-10494 - Turbines and turbine sets - Measurement of emitted airborne noise - Engineering/survey method
- ISO-10816-2 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
- ISO-10816-4 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 4: Gas turbine sets with fluid-film bearings
- ISO-10816-4-AM1 - - Amendment 1
- ISO-11042-1 - Gas turbines - Exhaust gas emission - Part 1: Measurement and evaluation
- ISO-11042-2 - Gas turbines - Exhaust gas emission - Part 2: Automated emission monitoring
- ISO-11086 - Gas turbines - Vocabulary
- ISO-14661 - Thermal turbines for industrial applications (steam turbines, gas expansion turbines) -- General requirements
- ISO-14661-1 - Thermal turbines for industrial applications (steam turbines, gas expansion turbines) - General requirements - Amendment 1: Data sheets for thermal turbines for industrial applications
- ISO-18888 - Gas turbine combined cycle power plants - Thermal performance tests
- ISO-19372 - Microturbines applications - Safety
- ISO-19859 - Gas turbine applications - Requirements for power generation
- ISO-19860 - Gas turbines - Data acquisition and trend monitoring system requirements for gas turbine installations
- ISO-20816-2 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
- ISO-20816-4 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings
- ISO-21789 - Gas turbine applications - Safety
- ISO-2314 - Gas turbines - Acceptance tests
- ISO-2314-1 - for combined-cycle power plants
- ISO-26382 - Cogeneration systems - Technical declarations for planning, evaluation and procurement
- ISO-3977-1 - Gas turbines - Procurement - Part 1: General introduction and definitions
- ISO-3977-2 - Gas turbines - Procurement - Part 2: Standard reference conditions and ratings
- ISO-3977-3 - Gas turbines - Procurement - Part 3: Design requirements
- ISO-3977-4 - Gas turbines - Procurement - Part 4: Fuels and environment
- ISO-3977-5 - Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries
- ISO-3977-7 - Gas turbines - Procurement - Part 7: Technical information
- ISO-3977-8 - Gas turbines - Procurement - Part 8: Inspection, testing, installation and commissioning
- ISO-3977-9 - Gas turbines -- Procurement -- Part 9: Reliability, availability, maintainability and safety
- ISO-7919-2 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
- ISO-7919-4 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 4: Gas turbine sets with fluid-film bearings
- ISO-7919-4-AM1 - - Amendment 1
Other SDOs:
- DIN-EN-12952-1 - Water-tube boilers and auxiliary installations - Part 1: General; German version EN 12952-1:2015
- DIN-EN-12952-14 - Part 14: Requirements for Flue Gas Denox Systems Using Liquefied Pressurized Ammonia &
- DIN-EN-12952-2 - Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
- DIN-EN-12952-3 - Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler; German version EN 12952-3:2011
- DIN-EN-12952-5 - Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
- DIN-EN-12952-6 - Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler
- DIN-EN-12952-7 - Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler; German version EN 12952-7:2012
- DIN-EN-12952 SUP 1 - Part 17: Guideline for the Involvement of an Inspection Body Independent of the Manufa
- DIN-EN-ISO-3977-5 - Part 5: Applications for Petroleum & Natural Gas Industries, Gas Turbines - Procuremen
- EN-12952-1 - Water-tube boilers and auxiliary installations - Part 1: General
- EN-12952-10 - Part 10: Requirements for Safeguards Against Excessive Pressure, Water-Tube Boilers &
- EN-12952-11 - Water-Tube Boilers & Auxiliary Installations, Requirements for Limiting Devices of The
- EN-12952-12 - Part 12: Requirements for Boiler Feedwater & Boiler Water Quality, Water-Tube Boilers
- EN-12952-13 - Part 13: Requirements for Flue Gas Cleaning Systems, Water-Tube Boilers & Auxiliary In
- EN-12952-14 - Part 14: Requirements for Flue Gas Denox Systems Using Liquefied Pressurized Ammonia &
- EN-12952-15 - Part 15: Acceptance Tests, Water-Tube Boilers & Auxiliary Installations
- EN-12952-16 - Part 16: Requirements for Grate & Fluidized-Bed Firing Systems for Solid Fuels for The
- EN-12952-18 - Water-tube boilers and auxiliary installations - Part 18: Operating instructions
- EN-12952-2 - Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
- EN-12952-3 - Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
- EN-12952-4 - Water-tube boilers and auxiliary installations - Part 4: In-service boiler life expectancy calculations
- EN-12952-5 - Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
- EN-12952-6 - Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler
- EN-12952-7 - Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler
- EN-12952-8 - Part 8: Requirements for Firing Systems for Liquid & Gaseousfuels for the Boiler, Wate
- EN-12952-9 - Part 9: Requirements for Firing Systems for Pulverized Solidfuels for the Boiler, Wate
- EN-45510-6-4 - Part 6-4: Turbine Auxiliaries - Pumps, Guide for Procurementof Power Station Equipment
- EN-45510-6-5 - Part 6-5: Turbine Auxiliaries - Dry Cooling Systems, Guide for Procurement of Power St
- EN-45510-6-8 - Guide for the Procurement of Power Station Equipment, Turbine Auxiliaries, Cranes, Sec
- EN-ISO-3977-5 - Part 5: Applications for Petroleum & Natural Gas Industries, Gas Turbines - Procuremen
- JIS-B-0127 - Glossary of Terms for Thermal Power Plant - Steam Turbines & Auxiliary Equipment of Th
- SS-EN-12952-1 - Water-tube boilers and auxiliary installations - Part 1: General
- SS-EN-12952-10 - Water-tube boilers and auxiliary installations - Part 10: Requirements for safety devices against excessive pressure
- SS-EN-12952-12 - Water-tube boilers and auxiliary installations - Part 12: Requirements for boiler feedwater and boiler water quality
- SS-EN-12952-13 - Water-tube boilers and auxiliary installations - Part 13: Requirements for flue gas cleaning systems
- SS-EN-12952-13-AM1 - Water-tube boilers and auxiliary installations - Part 13: Requirements for flue gas cleaning systems
- SS-EN-12952-14 - Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution
- SS-EN-12952-15 - Water-tube boilers and auxiliary installations - Part 15: Acceptance tests
- SS-EN-12952-16 - Water-tube boilers and auxiliary installations - Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler
- SS-EN-12952-18 - Water-tube boilers and auxiliary installations - Part 18: Operating instructions
- SS-EN-12952-2 - Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
- SS-EN-12952-3 - Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
- SS-EN-12952-4 - Water-tube boilers and auxiliary installations - Part 4: In-service boiler life expectancy calculations
- SS-EN-12952-5 - Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
- SS-EN-12952-6 - Water-tube boilers and auxiliary installations - Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler
- SS-EN-12952-7 - Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler
- SS-EN-12952-8 - Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler
- SS-EN-12952-9 - Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler
- SS-EN-45510-3-1 - Guide for procurement of power station equipment - Part 3-1: Boiler - Water tube boilers
- SS-EN-45510-3-2 - Guide for procurement of power station equipment - Part 3-2: Boiler - Shell boilers
- SS-EN-45510-3-3 - Guide for procurement of power station equipment - Part 3-3: Boilers - Boilers with fluidized bed firing
- SS-EN-45510-4-1 - Guide for procurement of power station equipment - Part 4 Boiler auxiliaries - Section 1: Equipment for reduction of dust emissions
- SS-EN-45510-4-10 - Guide for procurement of power station equipment - Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NOx) plant
- SS-EN-45510-4-2 - Guide for procurement of power station equipment - Part 4: boiler auxiliaries - Section 2: Gas-air, steam-air and gas-gas heaters
- SS-EN-45510-4-3 - Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 3: Draught plant
- SS-EN-45510-4-4 - Guide for procurement of power station equipment - Part 4-4: Boiler auxiliaries - Fuel preparation equipment
- SS-EN-45510-4-5 - Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries - Coal handling and bulk storage plant
- SS-EN-45510-4-6 - Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 6: Flue gas desulphurization (De-SOx) plant
- SS-EN-45510-4-7 - Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 7: Ash handling plant
- SS-EN-45510-4-8 - Guide for procurement of power station equipment - Part 4-8: Boiler auxiliaries - Dust handling plant
- SS-EN-45510-4-9 - Guide for procurement of power station equipment - Part 4-9: Boiler auxiliaries - Sootblowers
- SS-EN-45510-6-4 - Guide for procurement of power station equipment - Part 6-4: Turbine auxiliaries - Pumps
- SS-EN-45510-6-5 - Guide for procurement of power station equipment - Part 6-5: Turbine auxiliaries - Dry cooling systems
- SS-EN-45510-6-6 - Guide for procurement of power station equipment - Part 6-6: Turbine auxiliaries - Wet and wet/dry cooling towers
- SS-EN-45510-6-8 - Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries - Cranes
- SS-EN-45510-6-9 - Guide for procurement of power station equipment - Part 6-9: Turbine auxiliaries - Cooling water systems
- SS-EN-45510-7-1 - Guide for procurement of power station plant, equipment, and systems - Part 7-1: Pipework and valves - High pressure piping systems
- SS-EN-45510-7-2 - Guide for procurement of power station plant, equipment, and systems - Part 7-2: Pipework and valves - Boiler and high pressure valves
- SS-EN-ISO-10437 - Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003)
- SS-EN-ISO-21789 - Gas turbine applications - Safety (ISO 21789:2022)
- SS-EN-ISO-3977-5 - Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001)
- SS-ISO-10816-2 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min (ISO 10816-2:2009, IDT)
- SS-ISO-10816-3 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ (ISO 10816-3:2009, IDT)
- SS-ISO-10816-3-AM1 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ (ISO 10816-3:2009/Amd 1:2017, MOD)
- SS-ISO-10816-4 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 4: Gas turbine sets with fluid-film bearings (ISO 10816-4:2009, IDT)
- SS-ISO-20816-2 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min (ISO 20816-2:2017, IDT)
- SS-ISO-20816-3 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 3: Coupled industrial machines (ISO 20816-3:2022, IDT)
- SS-ISO-20816-4 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 4: Gas turbine sets in excess of 3 MW, with fluid-film bearings (ISO 20816-4:2018, IDT)
- SS-ISO-7919-2 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min (ISO 7919-2:2009, IDT)
- SS-ISO-7919-4 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 4: Gas turbine sets with fluid-film bearings (ISO 7919-4:2009, IDT)
- UNE-EN-12952-1 - Water-tube boilers and auxiliary installations - Part 1: General
- UNE-EN-12952-3 - Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler