Document Center List of Standards on Road Vehicles In General Including Testing And Recycling Of Road Vehicles Road Transport, See 03.220.20 Transport Exhaust Emissions, See 13.040.50
ICS Code 43.020
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-E1082 - Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
- ASTM-E1170 - Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
- ASTM-E1215 - Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
- ASTM-E1448 - Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
- ASTM-E3113 - Standard Specification for Ballistic-resistant Vehicle Door Panels Used by Public Safety Agencies
- ASTM-E445 - Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires
- ASTM-F3200 - Standard Terminology for Driverless Automatic Guided Industrial Vehicles
- ASTM-F3218 - Standard Practice for Documenting Environmental Conditions for Utilization with A-UGV Test Methods
- ASTM-F3244 - Standard Test Method for Navigation: Defined Area
- ASTM-F3265 - Standard Test Method for Grid-Video Obstacle Measurement
- ASTM-F3327 - Standard Practice for Recording the A-UGV Test Configuration
- ASTM-F424 - Standard Test Method for Tires for Wet Driving Traction in Straight-Ahead Motion Using Highway Vehicles (Withdrawn 2006)
- ASTM-F457 - Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
BSI:
- BS-6109-1 - Tail lifts, mobile lifts and ramps associated with vehicles. Code of practice for tail lifts
- BS-6109-2 - Tail lifts, mobile lifts and ramps associated with vehicles. Code of practice for passenger lifts and ramps
- BS-AU-144B - Specification for retreaded car and commercial vehicle tyres
- BS-AU-144F - Specification for retreaded car and commercial vehicle tyres
- BS-AU-145D - Specification for retroreflecting number plates
- BS-AU-145e - Specification for retroreflecting number plates
- BS-AU-145e-TC - Tracked Changes. Specification for retroreflecting number plates
- BS-AU-159E - Specification for Repairs To Tyres for Motor Vehicles Used on the Public Highway
- BS-AU-159F - Specification for repairs to tyres for motor vehicles used on the public highway
- BS-AU-159G - Specification for repairs to tyres for motor vehicles used on the public highway
- BS-AU-175-1B - Vehicle Identification Numbers (Vin), Specification for Content and Structure
- BS-AU-189 - Method of test for steady state cornering behaviour for road vehicles
- BS-AU-224A - Specification for Portable Wheel Ramps for Cars and Light Vans
- BS-AU-228-1 - Impact tests on road vehicles. Specification for measurement techniques and general instrumentation
- BS-AU-228-1A - Impact tests on road vehicles. Specification for measurement techniques and general instrumentation
- BS-AU-228-1B - Impact Tests on Road Vehicles, Specification for Measurement Techniques and General Instructions
- BS-AU-228-2 - Impact tests on road vehicles. Specification for measurement techniques using optical instrumentation
- BS-AU-244 - Glossary of terms for road vehicle dynamics and road holding ability
- BS-AU-256 - Passenger Cars, Power-Off Reactions of a Vehicle in a Turn, Open-Loop Test Method
- BS-AU-258 - Specification for elasticated straps
- BS-EN-12195-1 - Load restraining on road vehicles. Safety
- BS-EN-12195-3 - Load restraint assemblies on road vehicles. Safety
- BS-EN-17347 - Road vehicles. Machines for mounting and demounting vehicle tyres. Safety requirements
- BS-EN-60349-2 - Electrical traction. Rotating electrical machines for rail and road vehicles
- BS-EN-ISO-14505-3 - Ergonomics of the thermal environment. Evaluation of thermal environments in vehicles
- BS-EN-ISO-20566 - Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
- BSI-FLEX-1889 - Natural language description for abstract scenarios for automated driving systems. Specification
- BSI-FLEX-1890-V4 - Connected and automated vehicles. Vocabulary
- BS-ISO-10521-1 - Road vehicles. Road load
- BS-ISO-10521-2 - Road vehicles. Road load
- BS-ISO-10844 - Acoustics. Specification of test tracks for measuring sound emitted by road vehicles and their tyres
- BS-ISO-10844-TC - Tracked Changes. Acoustics. Specification of test tracks for measuring sound emitted by road vehicles and their tyres
- BS-ISO-11096 - Road vehicles. Pedestrian protection. Impact test method for pedestrian thigh, leg and knee
- BS-ISO-12021 - Road vehicles. Sensitivity to lateral wind. Open-loop test method using wind generator input
- BS-ISO-12219-1 - Interior air of road vehicles
- BS-ISO-12219-10 - Interior air of road vehicles
- BS-ISO-12219-1-TC - Tracked Changes. Interior air of road vehicles
- BS-ISO-12219-2 - Interior air of road vehicles
- BS-ISO-12219-3 - Interior air of road vehicles
- BS-ISO-12219-4 - Interior air of road vehicles
- BS-ISO-12219-5 - Interior air of road vehicles
- BS-ISO-12219-6 - Interior air of road vehicles
- BS-ISO-12219-7 - Interior air of road vehicles
- BS-ISO-12219-8 - Interior air of road vehicles
- BS-ISO-12219-9 - Interior air of road vehicles
- BS-ISO-13209-1 - Road vehicles. Open test sequence exchange format (OTX)
- BS-ISO-13209-2 - Road vehicles. Open Test sequence eXchange format (OTX)
- BS-ISO-13209-3 - Road vehicles. Open Test sequence eXchange format (OTX)
- BS-ISO-13674-1 - Road vehicles. Test method for the quantification of on-centre handling
- BS-ISO-13674-2 - Road vehicles. Test method for the quantification of on-centre handling
- BS-ISO-13674-2-TC - Tracked Changes. Road vehicles. Test method for the quantification of on-centre handling
- BS-ISO-14505-4 - Ergonomics of the thermal environment. Evaluation of thermal environments in vehicles
- BS-ISO-14794 - Heavy commercial vehicles and buses. Braking in a turn. Open-loop test methods
- BS-ISO-15828 - Road vehicles. Offset frontal impact test procedure
- BS-ISO-15829 - Road vehicles. Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
- BS-ISO-15830-1 - Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy
- BS-ISO-15830-1-TC - Tracked Changes. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy
- BS-ISO-15830-2 - Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy
- BS-ISO-15830-2-TC - Tracked Changes. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy
- BS-ISO-15830-3 - Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy
- BS-ISO-15830-4 - Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side impact dummy
- BS-ISO-16850 - Road vehicles. Pedestrian protection. Child head impact test method
- BS-ISO-16992 - Passenger car tyres. Spare unit substitutive equipment (SUSE)
- BS-ISO-17840-1 - Road vehicles. Information for first and second responders
- BS-ISO-17840-1-TC - Tracked Changes. Road vehicles. Information for first and second responders
- BS-ISO-17840-2 - Road vehicles. Information for first and second responders
- BS-ISO-17840-3 - Road vehicles. Information for first and second responders
- BS-ISO-17840-4 - Road vehicles. Information for first and second responders
- BS-ISO-17987-3 - Road vehicles. Local Interconnect Network (LIN)
- BS-ISO-19206-1 - Road vehicles. Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions
- BS-ISO-19206-2 - Road vehicles. Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions
- BS-ISO-19206-4 - Road vehicles. Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions
- BS-ISO-20077-1 - Road Vehicles. Extended vehicle (ExVe) methodology
- BS-ISO-20077-2 - Road Vehicles. Extended vehicle (ExVe) methodology
- BS-ISO-20176 - Road vehicles. H-point machine (HPM-II). Specifications and procedure for H-point determination
- BS-ISO-21612 - Road vehicles. Crosstalk determination for multi-axis load cell
- BS-ISO-27956 - Road vehicles. Securing of cargo in delivery vans. Requirements and test methods
- BS-ISO-34501 - Road vehicles. Test scenarios for automated driving systems Vocabulary
- BS-ISO-34502 - Road vehicles. Test scenarios for automated driving systems. Scenario based safety evaluation framework
- BS-ISO-3560 - Road vehicles. Frontal fixed barrier or pole impact test procedure
- BS-ISO-362-1 - Measurement of noise emitted by accelerating road vehicles. Engineering method
- BS-ISO-362-1-TC - Tracked Changes. Acoustics. Engineering method for measurement of noise emitted by accelerating road vehicles
- BS-ISO-3779 - Road vehicles. Vehicle identification number (VIN). Content and structure
- BS-ISO-3780 - Road vehicles. World manufacturer identifier (WMI) code
- BS-ISO-3833 - Road vehicles. Types. Terms and definitions
- BS-ISO-3888-1-TC - Tracked Changes. Passenger cars. Test track for a severe lane-change manoeuvre
- BS-ISO-4513 - Road vehicles. Visibility. Method for establishment of eyellipses for driver's eye location
- BS-ISO-5130 - Acoustics. Measurements of sound pressure level emitted by stationary road vehicles
- BS-ISO-6487 - Road vehicles. Measurement techniques in impact tests. Instrumentation
- BS-ISO-7401 - Road vehicles. Lateral transient response test methods. Open-loop test methods
- BS-ISO-8349 - Road vehicles. Measurement of road surface friction
- BS-ISO-8855 - Road vehicles. Vehicle dynamics and road-holding ability. Vocabulary
- DD-ISO-15827 - Road vehicles. Test procedures. Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags
- DD-ISO-16949 - Quality Management Systems, Particular Requirements for the Application of ISO-9001:2
- PAS-1881 - Assuring the operational safety of automated vehicles. Specification
- PAS-1884 - Safety operators in automated vehicle testing and trialling. Guide
- PAS-7061 - Batteries for vehicle propulsion electrification. Safe and environmentally-conscious handling of battery packs and modules. Code of practice
- PD-CEN-17828 - Road infrastructure. Automated vehicle interactions. Reference Framework Release 1
- PD-ISO-12350 - Road vehicles. Injury risk curves for the evaluation of occupant protection in side impact tests
- PD-ISO-13330 - Road vehicles. Calculation processes for the neck injury criteria in rear impact
- PD-ISO-13471-1 - Acoustics. Temperature influence on tyre/road noise measurement
- PD-ISO-13471-2 - Acoustics. Temperature influence on tyre/road noise measurement
- PD-ISO-13499 - Road vehicles. Multimedia data exchange format for impact tests
- PD-ISO-14933 - Road vehicles. Test procedures for evaluating out-of-position vehicle occupant interactions with deploying side air bags
- PD-ISO-15830-5 - Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy
- PD-ISO-16250 - Road vehicles. Objective rating metrics for dynamic systems
- PD-ISO-16949 - Quality management systems. Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
- PD-ISO-18506 - Procedure to construct injury risk curves for the evaluation of road user protection in crash tests
- PD-ISO-21002 - Road vehicles. Multidimensional measurement and coordinate systems definition
- PD-ISO-21476 - Road vehicles. Displacement calibration method of IR-TRACC devices
- PD-ISO-21934-1 - Road vehicles. Prospective safety performance assessment of pre-crash technology by virtual simulation
- PD-ISO-21959-1 - Road vehicles. Human performance and state in the context of automated driving
- PD-ISO-21974-1 - Naturalistic driving studies. Vocabulary
- PD-ISO-23049 - Road Vehicles. Ergonomic aspects of external visual communication from automated vehicles to other road users
- PD-ISO-23521 - Road vehicles. Calibration procedure for displacement devices
- PD-ISO-4804 - Road vehicles. Safety and cybersecurity for automated driving systems. Design, verification and validation
- TH-42043 - Motor Vehicles and Equipment. an International Guide To the Application of EC, Ece and National Approval Schemes
ISO:
- ISO-10326-1 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements
- ISO-10326-1-1 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements - Amendment 1
- ISO-10326-1-AM2 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements - Amendment 2
- ISO-10392 - Road vehicles - Determination of centre of gravity
- ISO-10521-1 - Road vehicles - Road load - Part 1: Determination under reference atmospheric conditions
- ISO-10521-2 - Road vehicles - Road load - Part 2: Reproduction on chassis dynamometer
- ISO-10844 - Acoustics - Specification of test tracks for measuring sound emitted by road vehicles and their tyres
- ISO-11096 - Road vehicles - Pedestrian protection - Impact test method for pedestrian thigh, leg and knee
- ISO-1176 - Road vehicles - Masses - Vocabulary and codes
- ISO-12021 - Road vehicles - Sensitivity to lateral wind - Open-loop test method using wind generator input
- ISO-12214 - Road vehicles - Direction-of-motion stereotypes for automotive hand controls
- ISO-12219-1 - Interior air of road vehicles - Part 1: Whole vehicle test chamber - Specification and method for the determination of volatile organic compounds in cabin interiors
- ISO-12219-10 - Interior air of road vehicles - Part 10: Whole vehicle test chamber - Specification and methods for the determination of volatile organic compounds in cabin interiors - Trucks and buses
- ISO-12219-2 - Interior air of road vehicles - Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Bag method
- ISO-12219-3 - Interior air of road vehicles - Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Micro-scale chamber method
- ISO-12219-4 - Interior air of road vehicles - Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method
- ISO-12219-5 - Interior air of road vehicles - Part 5: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Static chamber method
- ISO-12219-6 - Interior air of road vehicles - Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature - Small chamber method
- ISO-12219-7 - Interior air of road vehicles - Part 7: Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements
- ISO-12219-8 - Interior air of road vehicles - Part 8: Handling and packaging of materials and components for emission testing
- ISO-12219-9 - Interior air of road vehicles - Part 9: Determination of the emissions of volatile organic compounds from vehicle interior parts - Large bag method
- ISO-12350 - Road vehicles - Injury risk curves for the evaluation of occupant protection in side impact tests
- ISO-12351 - Road vehicles -- Determination of head contact and duration in impact tests
- ISO-13209-1 - Road vehicles - Open Test sequence eXchange format (OTX) - Part 1: General information and use cases
- ISO-13209-2 - Road vehicles - Open Test sequence eXchange format (OTX) - Part 2: Core data model specification and requirements
- ISO-13209-3 - Road vehicles - Open Test sequence eXchange format (OTX) - Part 3: Standard extensions and requirements
- ISO-13218 - Road vehicles - Child restraint systems - Report form for accidents involving child passengers
- ISO-13330 - Road vehicles - Calculation processes for the neck injury criteria in rear impact
- ISO-13471-1 - Acoustics - Temperature influence on tyre/road noise measurement - Part 1: Correction for temperature when testing with the CPX method
- ISO-13471-2 - Acoustics - Temperature influence on tyre/road noise measurement - Part 2: Correction for temperature when testing with the pass-by methods
- ISO-13499 - Road vehicles - Multimedia data exchange format for impact tests
- ISO-13674-1 - Road vehicles - Test method for the quantification of on-centre handling - Part 1: Weave test
- ISO-13674-2 - Road vehicles - Test method for the quantification of on-centre handling - Part 2: Transition test
- ISO-14505-1 - Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 1: Principles and methods for assessment of thermal stress
- ISO-14505-2 - Corrigendum
- ISO-14505-3 - Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 3: Evaluation of thermal comfort using human subjects
- ISO-14505-4 - Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 4: Determination of the equivalent temperature by means of a numerical manikin
- ISO-14512 - Passenger cars -- Straight-ahead braking on surfaces with split coefficient of friction -- Open-loop test procedure
- ISO-14794 - Heavy commercial vehicles and buses - Braking in a turn - Open-loop test methods
- ISO-14933 - Road vehicles - Test procedures for evaluating out-of-position vehicle occupant interactions with deploying side air bags
- ISO-15827 - Road vehicles - Test procedures - Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags
- ISO-15828 - Road vehicles - Offset frontal impact test procedure
- ISO-15829 - Road vehicles - Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
- ISO-15830-1 - Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 1: Vocabulary and rationale
- ISO-15830-2 - Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 2: Mechanical subsystems
- ISO-15830-3 - Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 3: Mechanical requirements for electronic subsystems
- ISO-15830-4 - Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side impact dummy - Part 4: Users manual
- ISO-15830-5 - Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 5: Dummy design updates
- ISO-16250 - Road vehicles - Objective rating metrics for dynamic systems
- ISO-16850 - Road vehicles - Pedestrian protection - Child head impact test method
- ISO-16850-AM1 - - Amendment 1
- ISO-16949 - Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
- ISO-16992 - Passenger car tyres - Spare unit substitutive equipment (SUSE)
- ISO-17373 - Road vehicles - Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact
- ISO-17840-1 - Road vehicles - Information for first and second responders - Part 1: Rescue sheet for passenger cars and light commercial vehicles
- ISO-17840-2 - Road vehicles - Information for first and second responders - Part 2: Rescue sheet for buses, coaches and heavy commercial vehicles
- ISO-17840-3 - Road vehicles - Information for first and second responders - Part 3: Emergency response guide template
- ISO-17840-4 - Road vehicles - Information for first and second responders - Part 4: Propulsion energy identification
- ISO-17987-3 - Road vehicles - Local Interconnect Network (LIN) - Part 3: Protocol specification
- ISO-18506 - Procedure to construct injury risk curves for the evaluation of road user protection in crash tests
- ISO-19206-1 - Road vehicles - Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions - Part 1: Requirements for passenger vehicle rear-end targets
- ISO-19206-2 - Road vehicles - Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions - Part 2: Requirements for pedestrian targets
- ISO-19206-4 - Road vehicles - Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions - Part 4: Requirements for bicyclist targets
- ISO-20077-1 - Road Vehicles - Extended vehicle (ExVe) methodology - Part 1: General information
- ISO-20077-2 - Road Vehicles - Extended vehicle (ExVe) methodology - Part 2: Methodology for designing the extended vehicle
- ISO-20176 - Road vehicles - H-point machine (HPM-II) - Specifications and procedure for H-point determination
- ISO-20566 - Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
- ISO-20828 - Road vehicles - Security certificate management
- ISO-21002 - Road vehicles - Multidimensional measurement and coordinate systems definition
- ISO-21476 - Road vehicles - Displacement calibration method of IR-TRACC devices
- ISO-21934-1 - Road vehicles - Prospective safety performance assessment of pre-crash technology by virtual simulation - Part 1: State-of-the-art and general method overview
- ISO-21959-1 - Road vehicles - Human performance and state in the context of automated driving - Part 1: Common underlying concepts
- ISO-21959-2 - Road vehicles - Human performance and state in the context of automated driving - Part 2: Considerations in designing experiments to investigate transition processes
- ISO-21974-1 - Naturalistic driving studies - Vocabulary - Part 1: Safety critical events
- ISO-22628 - Road vehicles - Recyclability and recoverability - Calculation method
- ISO-23049 - Road Vehicles - Ergonomic aspects of external visual communication from automated vehicles to other road users
- ISO-23521 - Road vehicles - Calibration procedure for displacement devices
- ISO-27955 - Road vehicles - Securing of cargo in passenger cars, station wagons and multi-purpose vehicles - Requirements and test methods
- ISO-27956 - Road vehicles - Securing of cargo in delivery vans - Requirements and test methods
- ISO-34501 - Road vehicles - Test scenarios for automated driving systems - Vocabulary
- ISO-34502 - Road vehicles - Test scenarios for automated driving systems - Scenario based safety evaluation framework
- ISO-3560 - Road vehicles - Frontal fixed barrier or pole impact test procedure
- ISO-362-1 - Acoustics - Engineering method for measurement of noise emitted by accelerating road vehicles - Part 1: M and N categories
- ISO-362-2 - Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category
- ISO-3779 - Road vehicles - Vehicle identification number (VIN) - Content and structure
- ISO-3780 - Road vehicles - World manufacturer identifier (WMI) code
- ISO-3784 - Road vehicles - Measurement of impact velocity in collision tests
- ISO-3795 - Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials
- ISO-3833 - Road vehicles - Types - Terms and definitions
- ISO-4030 - Road vehicles - Vehicle identification number (VIN) - Location and attachment
- ISO-4100 - Road vehicles - World parts manufacturer identifier (WPMI) code
- ISO-4130 - Road vehicles - Three-dimensional reference system and fiducial marks - Definitions
- ISO-4513 - Road vehicles - Visibility - Method for establishment of eyellipses for drivers eye location
- ISO-4804 - Road vehicles - Safety and cybersecurity for automated driving systems - Design, verification and validation
- ISO-5128 - Acoustics - Measurement of noise inside motor vehicles
- ISO-5130 - Acoustics - Measurements of sound pressure level emitted by stationary road vehicles
- ISO-5130-AM1 - Acoustics - Measurement of noise emitted by stationary road vehicles - Survey method - Amendment 1
- ISO-612 - Road vehicles - Dimensions of motor vehicles and towed vehicles - Terms and definitions
- ISO-6487 - Road vehicles - Measurement techniques in impact tests - Instrumentation
- ISO-6487-1 - - Amendment 1
- ISO-6487-AM1 - - Amendment 1
- ISO-6546 - Road vehicles - Collection of accident data for evaluation of occupant restraint performance
- ISO-6813 - Road vehicles - Collision classification - Terminology
- ISO-7401 - Road vehicles - Lateral transient response test methods - Open-loop test methods
- ISO-7861 - Road vehicles - Injury risk curves for evaluation of occupant protection in frontal impact
- ISO-8002 - Mechanical vibrations - Land vehicles - Method for reporting measured data
- ISO-8349 - Road vehicles - Measurement of road surface friction
- ISO-8357 - Road vehicles - Instructions for the implementation of the assignment of world manufacturer identifier (WMI) codes for vehicle identification number (VIN) systems and for world parts manufacturer identifier (WPMI) codes
- ISO-8721 - Road vehicles - Measurement techniques in impact tests - Optical instrumentation
- ISO-8855 - Road vehicles - Vehicle dynamics and road-holding ability - Vocabulary
- ISO/DIS-4513 - Road vehicles Visibility Method for establishment of eyellipses for driver's eye location
Other SDOs:
- ASQC-T863 - Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
- BS-ISO-15830-3-TC - Tracked Changes. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy
- DIN-ISO-362 - Acoustics, Measurement of Noise Emitted by Accelerating Roadvehicles, Engineering Meth
- EN-30326-1 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992)
- EN-60349-2 - Electrical Traction, Rotating Electrical Machines for Rail & Road Vehicles, Electronic
- EN-ISO-10326-1 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements
- EN-ISO-14505-2 - Part 2: Determination of Equivalent Temperature, Ergonomics of the Thermal Environmen
- EN-ISO-14505-3 - Part 3: Evaluation of Thermal Comfort Using Human Subjects, Ergonomics of the Thermal
- EN-ISO-20566 - Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013)
- EN-ISO-24534-2 - Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 2: Operational requirements
- EN-ISO-24534-3 - Intelligent transport systems - Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles - Part 3: Vehicle data
- EN-ISO-24534-4 - Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques
- SIS-CEN/TR-17828 - Road infrastructure - Automated vehicle interactions - Reference Framework Release 1
- SIS-ISO/TR-17987-5 - Road vehicles - Local Interconnect Network (LIN) - Part 5: Application programmers interface (API)
- SIS-ISO/TR-21959-2 - Road vehicles - Human performance and state in the context of automated driving - Part 2: Experimental guidance to investigate transition processes
- SIS-ISO/TR-21974-1 - Naturalistic driving studies Vocabulary Part 1: Safety critical events (ISO/TR 21974-1:2018)
- SIS-ISO/TR-23049 - Road Vehicles Ergonomic aspects of external visual communication from automated vehicles to other road users (ISO/TR 23049:2018)
- SIS-ISO/TR-4804 - Road vehicles Safety and cybersecurity for automated driving systems Design, verification and validation methods (ISO/TR 4804:2020)
- SIS-ISO/TS-13499 - Road vehicles - Multimedia data exchange format for impact tests (ISO/TS 13499:2014, IDT)
- SIS-ISO/TS-16949 - Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations (ISO/TS 16949:2009, IDT)
- SMS-ISO-3173 - Road vehicles - Apparatus for measurement of the opacity of exhaustgas from diesel engines operating under steady state conditions
- SMS-ISO-3437 - Road vehicles - Determination of fuel leakage in the event of a collision
- SMS-ISO-3560 - Road vehicles - Frontal fixed barrier collision test method
- SMS-ISO-3784 - Road vehicles - Measurement of impact velocity incollision tests
- SMS-ISO-3833 - Road vehicles - Types - Terms and definitions
- SMS-ISO-3929 - Road vehicles - Determination of exhaust carbon monoxide concentration at idle speed
- SS-EN-12195-2 - Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing equipment made from man-made fibres
- SS-EN-13423 - Natural gas vehicles - Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles
- SS-EN-1493 - Vehicle lifts
- SS-EN-15587 - Cereal and cereal products - Determination of Besatz in wheat (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.),triticale (Triticosecale Wittmack spp) and feed barley (Hordeum vulgare L.)
- SS-EN-16662-1 - Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 1: General safety and performance requirements
- SS-EN-17347 - Road vehicles - Machines for mounting and demounting vehicle tyres - Safety requirements
- SS-EN-30326-1 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements
- SS-EN-30326-1-AM1 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements Amendment 1(ISO 10326-1:1992/Amd 1:2007)
- SS-EN-30326-1-AM2 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements - Amendment 2 (ISO 10326-1:1992/Amd 2:2011)
- SS-EN-ISO-10326-1 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:2016)
- SS-EN-ISO-14505-2 - Ergonomics of the thermal environment - Evaluation of thermal environment in vehicles - Part 2: Determination of equivalent temperature (ISO 14505-2:2006)
- SS-EN-ISO-14505-3 - Ergonomics of the thermal environment - Evaluation of the thermal environment in vehicles - Part 3: Evaluation of thermal comfort using human subjects (ISO 14505-3:2006)
- SS-EN-ISO-20566 - Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2019)
- SS-EN-ISO-24534-4-AM1 - Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques - Amendment 1 (ISO 24534-4:2010/Amd 1:2019)
- SS-ISO-10326-1 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements
- SS-ISO-10326-1-AM1 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992/Amd 1:2007, IDT)
- SS-ISO-10392 - Road vehicles - Determination of centre of gravity (ISO 10392:2011, IDT)
- SS-ISO-10521-1 - Road vehicles - Road load - Part 1: Determination under reference atmospheric conditions (ISO 10521-1:2006, IDT)
- SS-ISO-10521-2 - Road vehicles - Road load - Part 2: Reproduction on chassis dynamometer (ISO 10521-2:2006, IDT)
- SS-ISO-10844 - Acoustics - Specification of test tracks for measuring noise emitted by road vehicles and their tyres (ISO 10844:2021, IDT)
- SS-ISO-10997 - Passenger vehicles - Side impact with deformable moving barrier - Full scale test
- SS-ISO-11096 - Road vehicles - Pedestrian protection - Impact test method for pedestrian thigh, leg and knee (ISO 11096:2011, IDT)
- SS-ISO-1176 - Road vehicles - Masses - Vocabulary and codes
- SS-ISO-11898 - Road vechicles - Interchange of digital information - Controller area network (CAN) for high speed communication
- SS-ISO-12021 - Road vehicles - Sensitivity to lateral wind - Open-loop test method using wind generator input (ISO 12021:2010, IDT)
- SS-ISO-12214 - Road vehicles - Direction-of-motion stereotypes for automotive hand controls (ISO 12214:2018, IDT)
- SS-ISO-12219-1 - Interior air of road vehicles Part 1: Whole vehicle test chamber Specification and method for the determination of volatile organic compounds in cabin interiors (ISO 12219-1:2021, IDT)
- SS-ISO-12219-10 - Interior air of road vehicles Part 10: Whole vehicle test chamber Specification and methods for the determination of volatile organic compounds in cabin interiors Trucks and buses (ISO 12219-10:2021, IDT)
- SS-ISO-12219-2 - Interior air of road vehicles - Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Bag method (ISO 12219-2:2012, IDT)
- SS-ISO-12219-3 - Interior air of road vehicles - Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Micro-scale chamber method (ISO 12219-3:2012, IDT)
- SS-ISO-12219-4 - Interior air of road vehicles - Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method (ISO 12219-4:2013, IDT)
- SS-ISO-12219-5 - Interior air of road vehicles - Part 5: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Static chamber method (ISO 12219-5:2014, IDT)
- SS-ISO-12219-6 - Interior air of road vehicles - Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature - Small chamber method (ISO 12219-6:2017, IDT)
- SS-ISO-12219-7 - Interior air of road vehicles - Part 7: Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements (ISO 12219-7:2017, IDT)
- SS-ISO-12219-8 - Interior air of road vehicles - Part 8: Handling and packaging of materials and components for emission testing (ISO 12219-8:2018, IDT)
- SS-ISO-12219-9 - Interior air of road vehicles - Part 9: Determination of the emissions of volatile organic compounds from vehicle interior parts - Large bag method (ISO 12219-9:2019, IDT)
- SS-ISO-13209-1 - Road vehicles - Open Test sequence eXchange format (OTX) - Part 1: General information and use cases (ISO 13209-1:2011, IDT)
- SS-ISO-13209-2 - Road vehicles Open Test sequence eXchange format (OTX) Part 2: Core data model specification and requirements (ISO 13209-2:2022, IDT)
- SS-ISO-13209-3 - Road vehicles Open Test sequence eXchange format (OTX) Part 3: Standard extensions and requirements (ISO 13209-3:2022, IDT)
- SS-ISO-13209-4 - Road vehicles Open Test sequence eXchange format (OTX) Part 4: Expanded extensions interface definition (ISO 13209-4:2021, IDT)
- SS-ISO-13215-2 - Road vehicles Reduction of misuse risk of child restraint systems Part 2: Requirements and test procedures for correct installation (panel method) (ISO 13215-2:2022, IDT)
- SS-ISO-13215-3 - Road vehicles Reduction of misuse risk of child restraint systems Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA) (ISO 13215-3:2022, IDT)
- SS-ISO-13218 - Road vehicles - Child restraint systems - Report form for accidents involving child passengers
- SS-ISO-13674-1 - Road vehicles - Test method for the quantification of on-centre handling - Part 1: Weave test (ISO 13674-1:2010, IDT)
- SS-ISO-13674-2 - Road vehicles - Test method for the quantification of on-centre handling - Part 2: Transition test (ISO 13674-2:2016, IDT)
- SS-ISO-14512 - Passenger cars - Straight-ahead braking on split coefficient of friction surfaces - Open-loop test procedures
- SS-ISO-14794 - Heavy commercial vehicles and buses - Braking in a turn - Open-loop test methods (ISO 14794:2011, IDT)
- SS-ISO-15037-1 - Road vehicles - Vehicle dynamics test methods - Part 1: General conditions for passenger cars (ISO 15037-1:2019, IDT)
- SS-ISO-15829 - Road vehicles - Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation (ISO 15829:2013, IDT)
- SS-ISO-15830-1 - Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 1: Terminology and rationale (ISO 15830-1:2022, IDT)
- SS-ISO-15830-2 - Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 2: Mechanical subsystems (ISO 15830-2:2022, IDT)
- SS-ISO-15830-3 - Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 3: Mechanical requirements for electronic subsystems (ISO 15830-3:2022, IDT)
- SS-ISO-15830-4 - Road vehicles Design and performance specifications for the WorldSID 50th percentile male side impact dummy Part 4: User's manual (ISO 15830-4:2022, IDT)
- SS-ISO-16850 - Road vehicles - Pedestrian protection - Child head impact test method (ISO 16850:2007, IDT)
- SS-ISO-16850-AM1 - Road vehicles - Pedestrian protection - Child head impact test method - Amendment 1 (ISO 16850:2007/Amd 1, IDT)
- SS-ISO-16992 - Passenger car tyres - Spare unit substitutive equipment (SUSE) (ISO 16992:2018, IDT)
- SS-ISO-17373 - Road vehicles - Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear end impact (ISO 17373:2005, IDT)
- SS-ISO-17840-1 - Road vehicles Information for first and second responders Part 1: Rescue sheet for passenger cars and light commercial vehicles (ISO 17840-1:2022, IDT)
- SS-ISO-17840-3 - Road vehicles - Information for first and second responders - Part 3: Emergency response guide template (ISO 17840-3:2019, IDT)
- SS-ISO-17840-4 - Road vehicles - Information for first and second responders - Part 4: Propulsion energy identification (ISO 17840-4:2018, IDT)
- SS-ISO-17987-3 - Road vehicles - Local Interconnect Network (LIN) - Part 3: Protocol specification (ISO 17987-3:2016, IDT)
- SS-ISO-19206-1 - Road vehicles - Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions - Part 1: Requirements for passenger vehicle rear-end targets (ISO PRF 19206-1, IDT)
- SS-ISO-19206-2 - Road vehicles - Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions - Part 2: Requirements for pedestrian targets (ISO PRF 19206-2, IDT)
- SS-ISO-19206-4 - Road vehicles Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions Part 4: Requirements for bicyclist targets (ISO 19206-4:2020, IDT)
- SS-ISO-20077-1 - Road Vehicles - Extended vehicle (ExVe) methodology - Part 1: General information (ISO 20077-1:2017, IDT)
- SS-ISO-20077-2 - Road Vehicles - Extended vehicle (ExVe) methodology - Part 2: Methodology for designing the extended vehicle (ISO 20077-2:2018, IDT)
- SS-ISO-20176 - Road vehicles - H-point machine (HPM-II) - Specifications and procedure for H-point determination (ISO 20176:2020, IDT)
- SS-ISO-20828 - Road vehicles - Security certificate management (ISO 20828:2006, IDT)
- SS-ISO-22628 - Road vehicles - Recyclability and recoverability - Calculation method
- SS-ISO-27955 - Road vehicles - Securing of cargo in passenger cars, station wagons and multi-purposes vehicles - Requirements and test methods (ISO 27955:2010, IDT)
- SS-ISO-27956 - Road vehicles - Securing of cargo in delivery vans - Requirements and test methods (ISO 27956:2009, IDT)
- SS-ISO-34501 - Road vehicles Test scenarios for automated driving systems Vocabulary (ISO 34501:2022, IDT)
- SS-ISO-34502 - Road vehicles Test scenarios for automated driving systems Scenario based safety evaluation framework (ISO 34502:2022, IDT)
- SS-ISO-3560 - Road vehicles - Frontal fixed barrier or pole impact test procedure (ISO 3560:2013, IDT)
- SS-ISO-362 - Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category (ISO 362-2:2009, IDT)
- SS-ISO-362-1 - Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories (ISO 362-1:2015, IDT)
- SS-ISO-362-2 - Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category (ISO 362-2:2009, IDT)
- SS-ISO-3779 - Road vehicles - Vehicle identification number (VIN) - Content and structure (ISO 3779:2009, IDT)
- SS-ISO-3780 - Road vehicles - World manufacturer identifier (WMI) code (ISO 3780:2009, IDT)
- SS-ISO-3795 - Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
- SS-ISO-3888-1 - Passenger cars - Test track for a severe lane-change manoeuvre - Part 1: Double lane-change (ISO 3888-1:2018, IDT)
- SS-ISO-3984 - Road vehicles - Rear moving barrier impact test procedure (ISO 3984:2004, IDT)
- SS-ISO-4030 - Road vehicles - Vehicle identification number (VIN) - Location and attachment
- SS-ISO-4100 - Road vehicles - World parts manufacturer identifier (WPMI) code
- SS-ISO-4130 - Road vehicles - Three-dimensional reference system and fiducial marks - Definitions
- SS-ISO-4138 - Passenger cars Steady-state circular driving behaviour Open-loop test methods (ISO 4138:2021, IDT)
- SS-ISO-4182 - Motor vehicles - Measurement of variations in dipped-beam headlamp angle as a function of load (ISO 4182:1999, IDT)
- SS-ISO-4513 - Road vehicles Visibility Method for establishment of eyellipses for driver's eye location (ISO 4513:2022, IDT)
- SS-ISO-5130 - Acoustics - Measurements of sound pressure level emitted by stationary road vehicles (ISO 5130:2019, IDT)
- SS-ISO-5130-AM1 - Acoustics - Measurements of sound pressure level emitted by stationary road vehicles - Amendment 1 (ISO 5130:2007/Amd 1:2012, IDT)
- SS-ISO-612 - Road vehicles - Dimensions of motor vehicles and towed vehicles - Terms and definitions
- SS-ISO-6487-AM1 - Road vehicles - Measurement techniques in impact tests - Instrumentation - Amendment 1 (ISO 6487:2015/Amd 1:2017, IDT)
- SS-ISO-6546 - Road vehicles - Collection of accident data for evaluation of occupant restraint performance (ISO 6546:2018, IDT)
- SS-ISO-6813 - Road vehicles - Collision classification - Terminology
- SS-ISO-6969 - Road vehicles - Sound signalling devices - Tests after mounting on vehicle (ISO 6969:2004, IDT)
- SS-ISO-7342 - Road vehicles - Diagnostic systems - Equipment for ignition systems testing
- SS-ISO-7591 - Road vehicles - Retro-reflective registration plates for motor vehicles and trailers - Specification
- SS-ISO-7639 - Road vehicles - Diagnostic systems - Graphical symbols
- SS-ISO-7644 - Road vehicles - Measurement of opacity of exhaustgas from compression-ignition (diesel) engines - Lug-down test
- SS-ISO-7645 - Road vehicles - Measurement of opacity of exhaustgas from compression-ignition (diesel) engines - Steady single-speed test
- SS-ISO-7656 - Commercial road vehicles - Dimensional codes
- SS-ISO-8349 - Road vehicles - Measurement of road surface friction
- SS-ISO-8721 - Road vehicles - Measurement techniques in impact tests - Optical instrumentation (ISO 8721:2018, IDT)
- SS-ISO-8855 - Road vehicles - Vehicle dynamics and road-holding ability - Vocabulary (ISO 8855:2011, IDT)
- SS-ISO-9130 - Motorcycles - Measurements method for location ofcentre of gravity
- SS-ISO-9815 - Road vehicles - Passenger-car and trailer combinations - Lateral stability test (ISO 9815:2010, IDT)
- SS-ISO-9816 - Passenger cars - Power-off reaction of a vehicle in a turn - Open-loop test method (ISO 9816:2018, IDT)
- UNE-310001 - Motor vehicle repair workshops. Requirements for the provision of their services