Document Center List of Standards on Gaseous Fuels Including Liquefied Petroleum Gases Hydrogen, See 71.100.20 Natural Gas, See 75.060
ICS Code 75.160.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D1070 - Standard Test Methods for Relative Density of Gaseous Fuels
- ASTM-D1071 - Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
- ASTM-D1072 - Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
- ASTM-D1142 - Standard Test Method for Water Vapor Content of Gaseous Fuels by
Measurement of Dew-Point Temperature - ASTM-D1265 - Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
- ASTM-D1267 - Standard Test Method for Gauge Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
- ASTM-D1826 - Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
- ASTM-D1835 - Standard Specification for Liquefied Petroleum (LP) Gases
- ASTM-D1837 - Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases (Withdrawn 2017)
- ASTM-D1946 - Standard Practice for Analysis of Reformed Gas by Gas Chromatography
- ASTM-D2158 - Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
- ASTM-D2163 - Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
- ASTM-D2384 - Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures
- ASTM-D2420 - Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
- ASTM-D2598 - Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
- ASTM-D3588 - Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
- ASTM-D3956 - Standard Specification for Methane Thermophysical Property Tables
- ASTM-D3984 - Standard Specification for Ethane Thermophysical Property Tables
- ASTM-D4084 - Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
- ASTM-D4150 - Standard Terminology Relating to Gaseous Fuels
- ASTM-D4362 - Standard Specification for Propane Thermophysical Property Tables
- ASTM-D4468 - Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and
Rateometric Colorimetry - ASTM-D4650 - Standard Specification for Normal Butane Thermophysical Property Tables
- ASTM-D4651 - Standard Specification for Isobutane Thermophysical Property Tables
- ASTM-D4891 - Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
- ASTM-D4984 - Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
- ASTM-D5287 - Standard Practice for Automatic Sampling of Gaseous Fuels (Withdrawn 2024)
- ASTM-D5305 - Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor
- ASTM-D5454 - Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
- ASTM-D5504 - Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
- ASTM-D6667 - Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM-D6897 - Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
- ASTM-D6968 - Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection (Withdrawn 2024)
- ASTM-D7164 - Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
- ASTM-D7166 - Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
- ASTM-D7493 - Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
- ASTM-D7607 - Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
- ASTM-D7756 - Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
- ASTM-D7828 - Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC) (Withdrawn 2021)
- ASTM-D7833 - Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
- ASTM-D7941 - Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
- ASTM-D7994 - Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
- ASTM-D8060 - Standard Specification for 2-Bromo-3,3,3-Trifluoro-1-Propene (CF
3 CBr=CH2 ) - ASTM-D8061 - Standard Practice for Handling, Transportation, and Storage of 2-Bromo-3,3,3-Trifluoro-1-Propene (CF
3 CBr=CH2 ) - ASTM-D8221 - Standard Practice for Determining the Calculated Methane Number (MN
C ) of Gaseous Fuels Used in Internal Combustion Engines - ASTM-E2079 - Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
BSI:
- BS-1179 - Glossary of terms used in the gas industry
- BS-1179-6 - Glossary of terms used in the gas industry
- BS-2000-272 - Methods of test for petroleum and its products
- BS-2000-317 - Methods of test for petroleum and its products
- BS-3156-10.3.1 - Principles of Cooled Surface Condensation Hygrometers and General Description of Their
- BS-3156-11.1.2 - Determination of Hydrocarbons From Butane (C4) To Hexadecane(C16) by Gas Chromatograph
- BS-4250 - Specification for commercial butane and commercial propane
- BS-4250-1 - Liquefied petroleum gas. Specification for commercial butane and propane
- BS-5355 - Specification for Filling Ratios & Developed Pressures for Liquefiable & Permanent Gas
- BS-EN-13673-1 - Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
- BS-EN-13673-2 - Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours. Determination of the maximum rate of explosion pressure rise
- BS-EN-13856 - Minimum requirements for the content of the user manual for automotive LPG systems
- BS-EN-15469 - Petroleum products. Test method for free water in liquefied petroleum gas by visual inspection
- BS-EN-15470 - Liquefied petroleum gases. Determination of dissolved residues. High temperature Gas chromatographic method
- BS-EN-15471 - Liquefied petroleum gases. Determination of dissolved residues. High-temperature gravimetric method
- BS-EN-15967 - Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
- BS-EN-15984 - Petroleum industry and products. Determination of composition of refinery heating gas and calculation of carbon content and calorific value. Gas chromatography method
- BS-EN-15984-TC - Tracked Changes. Petroleum industry and products. Determination of composition of refinery heating gas and calculation of carbon content and calorific value. Gas chromatography method
- BS-EN-16723-2 - Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network
- BS-EN-ISO-13758 - Liquefied petroleum gases. Assessment of the dryness of propane. Valve freeze method
- BS-EN-ISO-20847 - Methods of test for petroleum and its products. BS 2000-496. Petroleum products. Determination of the sulfur content of automotive fuels. Energy-dispersive X-ray fluorescence spectrometry
- BS-EN-ISO-20884 - Petroleum products. Determination of sulfur content of automotive fuels. Wavelength-dispersive X-ray fluorescence spectrometry
- BS-EN-ISO-23306 - Specification of liquefied natural gas as a fuel for marine applications
- BS-EN-ISO-6975 - Natural gas. Extended analysis. Gas chromatographic method
- PD-CEN-17238 - Proposed limit values for contaminants in biomethane based on health assessment criteria
- TH-42080 - Gas Supply Characteristics & Appliance Approval, an International Survey
ISO:
- ISO-13757 - Liquefied petroleum gases - Determination of oily residues - High-temperature method
- ISO-13758 - Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method
- ISO-13758-AM1 - - Amendment 1
- ISO-14687-1 - Hydrogen fuel - Product specification - Part 1: All applications except proton exchange membrane (PEM) fuel cell for road vehicles
- ISO-20846 - Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method
- ISO-20847 - Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry
- ISO-20884 - Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry
- ISO-20884-AM1 - - Amendment 1: Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry - Amendment 1: Addition of the SSD detector to the Monochromatic excitation part of Table 1
- ISO-23306 - Specification of liquefied natural gas as a fuel for marine applications
- ISO-4256 - Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method
- ISO-4257 - Liquefied petroleum gases -- Method of sampling
- ISO-6251 - Liquefied petroleum gases - Corrosiveness to copper - Copper strip test
- ISO-7941 - Commercial propane and butane - Analysis by gas chromatography
- ISO-8216-3 - Petroleum products - Fuels (class F) - Classification - Part 3 : Family L (Liquefied petroleum gases)
- ISO-8819 - Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method
- ISO-8973 - Liquefied petroleum gases - Calculation method for density and vapour pressure
- ISO-8973-AM1 - - Amendment 1
- ISO-9162 - Petroleum products - Fuels (class F) - Liquefied petroleum gases - Specifications
Other SDOs:
- CEN-17238 - Proposed limit values for contaminants in biomethane based on health assessment criteria
- DIN-51666 - Testing of Petroleum Products - Determination of Composition for Calculating Refinery
- DIN-EN-13673-2 - Part 2: Determination of the Maximum Rate of Explosion Pressure Rise, Determination Of
- DIN-EN-589 - Automotive fuels - LPG - Requirements and test method
- DIN-EN-720-2 - Gases & Gas Mixtures, Determination of Flammability & Oxidizing Ability
- EN-13673-2 - Part 2: Determination of the Maximum Rate of Explosion Pressure Rise, Determination Of
- EN-15469 - Petroleum Products, Test Method for Free Water in Liquefied Petroleum Gas by Visual I
- EN-15470 - Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
- EN-15471 - Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method
- EN-16723-2 - Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 2: Automotive fuels specification
- EN-589 - Automotive fuels - LPG - Requirements and test methods
- EN-720-2 - Part 2: Determination of Flammability & Oxidizing Ability of Gases & Gas Mixtures, TRA
- EN-ISO-13758 - Methods of Test for Petroleum & It's Products, Liquefied Petroleum Gases, Assessment O
- EN-ISO-20846 - Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method
- EN-ISO-20884 - Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry
- JIS-B-8245 - Valves for liquefied petroleum gas cylinder
- JIS-K-2301 - Fuel Gases & Natural Gas - Methods for Chemical Analysis & Testing
- SIS-831010 - Hängrännor och stuprör. Grundläggande mått
- SIS-831011 - Hängrännor, stuprör och tillbehör - Fordringar
- SIS-CEN/TR-17238 - Proposed limit values for contaminants in biomethane based on health assessment criteria
- SS-EN-13673-1 - Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 1: Determination of the maximum explosion pressure
- SS-EN-13673-2 - Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise
- SS-EN-13856 - Minimum requirements for content of the user manual for automotive LPG systems
- SS-EN-15469 - Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection
- SS-EN-15470 - Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
- SS-EN-15471 - Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method
- SS-EN-15967 - Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
- SS-EN-15984 - Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
- SS-EN-16723-2 - Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 2: Automotive fuels specification
- SS-EN-17278 - Natural gas vehicles - Vehicle fuelling appliances
- SS-EN-27941 - Commercial propane and butane - Analysis by gas chromatography (ISO 7941:1988)
- SS-EN-589 - Automotive fuels - LPG - Requirements and test methods
- SS-EN-720-1 - Transportable gas cylinders - Gases and gas mixtures - Part 1: Properties of pure gases
- SS-EN-720-2 - Transportable gas cylinders - Gases and gas mixtures - Part 2: Determination of flammability and oxidizing ability of gases and gas mixtures
- SS-EN-ISO-10156 - Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2017)
- SS-EN-ISO-13757 - Liquefied petroleum gases - Determination of oilyresidues - High-temperature method (ISO 13757:1996)
- SS-EN-ISO-13758 - Liquefied petroleumgases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996)
- SS-EN-ISO-13758-AM1 - Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method - Amendment 1 (ISO 13758:1996/Amd 1:2020)
- SS-EN-ISO-15403-1 - Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006)
- SS-EN-ISO-18274 - Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2010)
- SS-EN-ISO-20846 - Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2019)
- SS-EN-ISO-20847 - Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004)
- SS-EN-ISO-20884 - Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2019)
- SS-EN-ISO-20884-AM1 - Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry - Amendment 1: Addition of the SSD detector to the Monochromatic excitation part of Table 1 (ISO 20884:2019/Amd 1:2021)
- SS-EN-ISO-21572 - Foodstuffs - Molecular biomarker analysis - Immunochemical methods for the detection and quantification of proteins (ISO 21572:2019)
- SS-EN-ISO-23306 - Specification of liquefied natural gas as a fuel for marine applications (ISO 23306:2020)
- SS-EN-ISO-4256 - Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method (ISO 4256:1998)
- SS-EN-ISO-4257 - Liquefied petroleum gases - Method of sampling (ISO 4257:2001)
- SS-EN-ISO-6251 - Liquefied petroleum gases - Corrosiveness to copper - Copper strip test (ISO 6251:1996)
- SS-EN-ISO-8819 - Liquefied petroleum gases - Detection of hydrogensulfide - Lead acetat method (ISO 8819:1993)
- SS-EN-ISO-8973 - Liquefied petroleum gases - Calculation method for density and vapour pressure (ISO 8973:1997)
- SS-ISO-4257 - Liquefied petroleum gases - Method of sampling
- SS-ISO-7941 - Commercial propane and butane - Analysis by gas chromatography
- SS-ISO-8216-3 - Petroleum products - Fuels (class F) - Classification - Part 3: Family L (Liquefied petroleum gases)
- SS-ISO-8819 - Liquefied petroleum gases - Detection of hydrogensulfide - Lead acetate method
- SS-ISO-8973 - Liquefied petroleum gases - Calculation method for density and vapour pressure
- SS-ISO-9162 - Petroleum products - Fuels (class F) - Liquefied petroleum gases - Specifications (ISO 9162:2013, IDT)