Document Center List of Standards on Other Methods Of Testing Of Metals
ICS Code 77.040.99
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1033 - Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
- ASTM-A1084 - Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
- ASTM-A912 - Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
- ASTM-A923 - Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
- ASTM-B63 - Standard Test Method for Resistivity of Metallically Conducting Resistance and
Contact Materials - ASTM-B796 - Standard Test Method for Nonmetallic Inclusion Content of Ferrous Powders Intended for Powder Forging (PF) Applications
- ASTM-B797 - Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts
- ASTM-E1122 - Standard Practice for Obtaining JK Inclusion Ratings Using Automatic Image Analysis (Withdrawn 2006)
- ASTM-E1181 - Standard Test Methods for Characterizing Duplex Grain Sizes
- ASTM-E1245 - Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
- ASTM-E1351 - Standard Practice for Production and Evaluation of Field Metallographic Replicas
- ASTM-E1561 - Standard Practice for Analysis of Strain Gage Rosette Data
- ASTM-E184 - Standard Practice for Effects of High-Energy Neutron Radiation on the Mechanical Properties of Metallic Materials, E706 (IB) (Withdrawn 2002)
- ASTM-E1916 - Standard Guide for Identification of Mixed Lots of Metals
- ASTM-E228 - Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
- ASTM-E2283 - Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
- ASTM-E3 - Standard Guide for Preparation of Metallographic Specimens
- ASTM-E340 - Standard Practice for Macroetching Metals and Alloys
- ASTM-E407 - Standard Practice for Microetching Metals and Alloys
- ASTM-E432 - Standard Guide for Selection of a Leak Testing Method
- ASTM-E433 - Standard Reference Photographs for Liquid Penetrant Inspection
- ASTM-E45 - Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM-E479 - Standard Guide for Preparation of a Leak Testing Specification (Withdrawn 2014)
- ASTM-E562 - Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
- ASTM-E7 - Standard Terminology Relating to Metallography
- ASTM-E712 - Standard Practice for Laboratory Screening of Metallic Containment Materials for Use With Liquids in Solar Heating and Cooling Systems (Withdrawn 2018)
- ASTM-E81 - Standard Test Method for Preparing Quantitative Pole Figures
- ASTM-E82 - Standard Test Method for Determining the Orientation of a Metal Crystal
- ASTM-E826 - Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry (Withdrawn 2023)
- ASTM-E942 - Standard Guide for Investigating the Effects of Helium in Irradiated Metals
- ASTM-E96 - Standard Test Methods for Water Vapor Transmission of Materials
- ASTM-F1459 - Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
- ASTM-F1593 - Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer (Withdrawn 2023)
- ASTM-F1710 - Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer (Withdrawn 2023)
- ASTM-F390 - Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
- ASTM-G113 - Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
- ASTM-G129 - Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
- ASTM-G142 - Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
- ASTM-G79 - Standard Practice for Evaluation of Metals Exposed to Carburization Environments (Withdrawn 2005)
- ASTM-G97 - Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
BSI:
- BS-4490 - Methods for micrographic determination of the grain size of steel
- BS-5710 - Methods for macroscopic assessment of the content of non-metallic inclusions in wrought steels
- BS-5714 - Method of measurement of resistivity of metallic materials
- BS-6481 - Method for determination of effective depth of hardening of steel after flame or induction hardening
- BS-7590 - Method for statistically estimating the volume fraction of phases and constituents by systematic manual point counting with a grid
- BS-EN-10247 - Micrographic examination of the non-metallic inclusion content of steels using standard pictures
- BS-EN-10247-TC - Tracked Changes. Micrographic examination of the non-metallic inclusion content of steels using standard pictures
- BS-EN-ISO-18203 - Steel. Determination of the thickness of surface-hardened layers
- BS-EN-ISO-2639 - Steels. Determination and verification of the depth of carburized and hardened cases
- BS-EN-ISO-3326 - Hardmetals. Determination of (the magnetization) coercivity
- BS-EN-ISO-4499-1 - Hardmetals. Metallographic determination of microstructure
- BS-EN-ISO-4499-2 - Hardmetals. Metallographic determination of microstructure
- BS-EN-ISO-4499-3 - Hardmetals. Metallographic determination of microstructure
- BS-EN-ISO-4499-4 - Hardmetals. Metallographic determination of microstructure
- BS-EN-ISO-642 - Steel hardenability test by end quenching (Jominy test)
- BS-EN-ISO-643 - Steels. Micrographic determination of the apparent grain size
- BS-ISO-16573 - Steel. Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels
- BS-ISO-16573-1 - Steel. Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels
- BS-ISO-16573-2 - Steel. Measurement method for the evaluation of hydrogen embrittlement resistance of high-strength steels
- BS-ISO-16574 - Determination of percentage of resolvable pearlite in high carbon steel wire rod
- BS-ISO-18203 - Steel. Determination of the thickness of surface-hardened layers
- BS-ISO-4968 - Steel. Macrographic examination by sulfur print (Baumann method)
- BS-ISO-4968-TC - Tracked Changes. Steel. Macrographic examination by sulfur print (Baumann method)
- BS-ISO-9042 - Steels. Point counting method for statistically estimating the volume fraction of a constituent with a point grid
- DD-ENV-10247 - Micrographic Examination of the Nonmetallic Inclusion Content of Steels Using Standard
ISO:
- ISO-14321 - Sintered metal materials, excluding hardmetals - Metallographic preparation and examination
- ISO-16573 - Steel - Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels
- ISO-16573-1 - Steel - Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels - Part 1: Constant load test
- ISO-16573-2 - Steel - Measurement method for the evaluation of hydrogen embrittlement resistance of high-strength steels - Part 2: Slow strain rate test
- ISO-16574 - Determination of percentage of resolvable pearlite in high carbon steel wire rod
- ISO-18203 - Steel - Determination of the thickness of surface-hardened layers
- ISO-196 - Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test
- ISO-2624 - Copper and copper alloys - Estimation of average grain size
- ISO-2626 - Copper - Hydrogen embrittlement test
- ISO-2639 - Steels - Determination and verification of the depth of carburized and hardened cases
- ISO-3326 - Hardmetals - Determination of (the magnetization) coercivity
- ISO-3754 - Steel - Determination of effective depth of hardening after flame or induction hardening
- ISO-3763 - Wrought steels - Macroscopic methods for assessing the content of non-metallic inclusions
- ISO-3887 - Steels - Determination of the depth of decarburization
- ISO-4499 - Hardmetals - Metallographic determination of microstructure
- ISO-4499-1 - Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description
- ISO-4499-2 - Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size
- ISO-4499-3 - Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
- ISO-4499-4 - Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content
- ISO-4505 - Hardmetals - Metallographic determination of porosity and uncombined carbon
- ISO-4746 - Oxygen-free copper - Scale adhesion test
- ISO-4967 - Steel - Determination of content of non-metallic inclusions - Micrographic method using standard diagrams
- ISO-4968 - Steel - Macrographic examination by sulphur print (Baumann method)
- ISO-4969 - Steel - Etching method for macroscopic examination
- ISO-4970 - Steel - Determination of total or effective thickness of thin surface-hardened layers
- ISO-5949 - Tool steels and bearing steels - Micrographic method for assessing the distribution of carbides using reference photomicrographs
- ISO-642 - Steel -- Hardenability test by end quenching (Jominy test)
- ISO-643 - Steels - Micrographic determination of the apparent grain size
- ISO-9042 - Steels - Point counting method for statistically estimating the volume fraction of a constituent with a point grid
Other SDOs:
- DIN-EN-ISO-2639 - Steel, Determination & Verification of the Depth of Carburized & Hardened Cases
- DIN-EN-ISO-3887 - Steels, Determination of Depth of Decarburization
- DIN-EN-ISO-643 - Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
- EN-10247 - Micrographic examination of the non-metallic inclusion content of steels using standard pictures
- EN-ISO-3326 - Hardmetals - Determination of (the magnetization) coercivity (ISO 3326:2013)
- EN-ISO-4499-1 - Part 1: Photomicrographs & Description, Hardmetals - Metallographic Determination of M
- EN-ISO-4499-3 - Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
- EN-ISO-4499-4 - Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content
- EN-ISO-643 - Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
- JIS-G-0551 - Steels -- Micrographic determination of the apparent grain size
- JIS-G-0553-AM1 - Steel -- Macroscopic examination by etching (Amendment 1)
- JIS-G-0556 - Method of macro-streak-flaw test for steel
- JIS-G-0561 - Method of hardenability test for steel (End quenching method)
- JIS-G-0567 - Method of elevated temperature tensile test for steels and heat-resisting alloys
- MNC-1115 - Jernkontorets skala II f"r best"mning av icke-metalliska inneslutningar
- SIS-111110 - Methods for assessing slag inclusion content in steels. Macroscopic methods
- SIS-ISO/TR-14321 - Sintered metal materials, excluding hardmetals - Metallographic preparation and examination
- SS-111116 - Jernkontorets inclusion chart II for quantitative assessment of the content of non-metallic inclusions in metals and alloys
- SS-EN-10229 - Evaluation of resistance of steel products to hydrogen induced cracking
- SS-EN-10247 - Micrographic examination of the non-metallic inclusion content of steels using standard pictures
- SS-EN-1971-1 - Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
- SS-EN-1971-2 - Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
- SS-EN-ISO-196 - Wrought copper and copper alloys - Detection of residual stress - Mercury(l) nitrate test (ISO 196:1978)
- SS-EN-ISO-2624 - Copper and copper alloys - Estimation of average grain size (ISO 2624:1990)
- SS-EN-ISO-2626 - Copper - Hydrogen embrittlement test (ISO 2626:1973)
- SS-EN-ISO-2639 - Steels - Determination and verification of the depth of carburized and hardened cases (ISO 2639:2002)
- SS-EN-ISO-3326 - Hardmetals - Determination of (the magnetization) coercivity (ISO 3326:2013)
- SS-EN-ISO-3887 - Steels - Determination of the depth of decarburization (ISO 3887:2023)
- SS-EN-ISO-4499-1 - Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020)
- SS-EN-ISO-4499-2 - Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020)
- SS-EN-ISO-4499-3 - Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals (ISO 4499-3:2016)
- SS-EN-ISO-4499-4 - Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content (ISO 4499-4:2016)
- SS-EN-ISO-642 - Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999)
- SS-EN-ISO-643 - Steels - Micrographic determination of the apparent grain size (ISO 643:2019)
- SS-ISO-13067 - Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020, IDT)
- SS-ISO-26482 - Hardmetals - Determination of lead and cadmium content (ISO 26482:2010, IDT)