Document Center List of Standards on Powder Metallurgy Including Sintered Metal Materials And Hardmetals
ICS Code 77.160
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-A811 - Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques
- ASTM-A839 - Standard Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications
- ASTM-A904 - Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts
- ASTM-B212 - Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM-B213 - Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM-B214 - Standard Test Method for Sieve Analysis of Metal Powders
- ASTM-B215 - Standard Practices for Sampling Metal Powders
- ASTM-B222 - Specification for Sintered Iron-Copper Structural Parts (Withdrawn 1988)
- ASTM-B243 - Standard Terminology of Powder Metallurgy
- ASTM-B255 - Standard Specification for Sintered Bronze Structural Parts (Withdrawn 2000)
- ASTM-B276 - Standard Test Method for Apparent Porosity in Cemented Carbides
- ASTM-B282 - Standard Specification for Sintered Brass Structural Parts (Withdrawn 2000)
- ASTM-B311 - Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
- ASTM-B312 - Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
- ASTM-B328 - Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings (Withdrawn 2009)
- ASTM-B329 - Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
- ASTM-B330 - Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability
- ASTM-B331 - Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
- ASTM-B347 - Test Method for Hardness of Sintered Metal Friction Materials (Withdrawn 1991)
- ASTM-B362 - Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
- ASTM-B390 - Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides (Withdrawn 2010)
- ASTM-B406 - Standard Test Method for Transverse Rupture Strength of Cemented Carbides
- ASTM-B417 - Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- ASTM-B430 - Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry (Withdrawn 2011)
- ASTM-B458 - Standard Specification for Sintered Nickel Silver Structural Parts (Withdrawn 2000)
- ASTM-B525 - Specification for Sintered Austenitic Stainless Steel Structural Parts
- ASTM-B527 - Standard Test Method for Tap Density of Metal Powders and Compounds
- ASTM-B528 - Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
- ASTM-B610 - Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders
- ASTM-B611 - Standard Test Method for Determining the High Stress Abrasion Resistance of Hard Materials
- ASTM-B657 - Standard Guide for Metallographic Identification of Microstructure in Cemented Carbides
- ASTM-B665 - Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
- ASTM-B703 - Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
- ASTM-B721 - Standard Test Method for Microhardness and Case Depth of Powder Metallurgy (P/M) Parts (Withdrawn 2004)
- ASTM-B761 - Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
- ASTM-B771 - Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
- ASTM-B783 - Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts
- ASTM-B795 - Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
- ASTM-B817 - Standard Specification for Powder Metallurgy (PM) Titanium Alloy Structural Components (Withdrawn 2013)
- ASTM-B823 - Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts
- ASTM-B848 - Standard Specification for Powder Forged (PF) Ferrous Materials
- ASTM-B853 - Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
- ASTM-B859 - Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
- ASTM-B883 - Standard Specification for Metal Injection Molded (MIM) Materials
- ASTM-B886 - Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
- ASTM-B887 - Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
- ASTM-B895 - Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution
- ASTM-B922 - Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
- ASTM-B923 - Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
- ASTM-B925 - Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
- ASTM-B930 - Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
- ASTM-B931 - Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts
- ASTM-B933 - Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
- ASTM-B934 - Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
- ASTM-B935 - Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials
- ASTM-B939 - Standard Test Method for Radial Crushing Strength,
K , of Powder Metallurgy (PM) Bearings and Structural Materials - ASTM-B946 - Standard Test Method for Surface Finish of Powder Metallurgy (PM) Products
- ASTM-B962 - Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
- ASTM-B963 - Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
- ASTM-B964 - Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
- ASTM-B988 - Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components
- ASTM-D5861 - Standard Guide for Significance of Particle Size Measurements of Coating Powders
- ASTM-D6682 - Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester (Withdrawn 2017)
- ASTM-D7743 - Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders
- ASTM-E1569 - Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique (Withdrawn 2018)
- ASTM-E159 - Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
- ASTM-E194 - Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
- ASTM-F3049 - Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes
BSI:
- BS-2955 - Glossary of terms relating to particle technology
- BS-4276 - Specification for hard metal for wire, bar and tube drawing dies
- BS-4359-4 - Determination of the specific surface area of powders
- BS-5600-1.1 - Powder metallurgical materials and products. General information
- BS-5600-2.7 - Powder metallurgical materials and products. Methods of sampling and testing metallic powders. Determination of dimensional changes associated with compacting and sintering, excluding powders for hardmetals
- BS-5600-3.10 - Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals
- BS-5600-3.11.2 - Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals. Determination of apparent hardness.
- BS-5600-3.3 - Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals
- BS-5600-4.1 - Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Determination of total carbon: gravimetric method
- BS-5600-4-4.14 - Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals
- BS-5600-4.9 - Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Determination of (the magnetization) coercivity
- BS-EN-1274 - Thermal spraying. Powders. Composition, technical supply conditions
- BS-EN-14317 - Sintered metal materials excluding hardmetals. Determination of compressive yield strength
- BS-EN-23326 - Specification for hardmetals. Determination of (the magnetization) coercivity
- BS-EN-23907 - Hardmetals. Determination of total carbon content. Gravimetric method
- BS-EN-23954 - Powders for powder metallurgical purposes. Sampling
- BS-EN-24003 - Permeable sintered metal materials. Determination of bubble test pore size
- BS-EN-24491-4 - Metallic powders. Determination of oxygen content by reduction methods
- BS-EN-24492 - Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
- BS-EN-24496 - Metallic powders. Determination of acid insoluble content in iron, copper, tin and bronze powders
- BS-EN-24505 - Specification for hardmetals. Metallographic determination of porosity and uncombined carbon
- BS-EN-ISO-10070 - Metallic powders. Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
- BS-EN-ISO-11876 - Hardmetals. Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders. Flame atomic absorption spectrometric method
- BS-EN-ISO-13517 - Metallic powders. Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter)
- BS-EN-ISO-13944 - Lubricated metal-powder mixes. Determination of lubricant content. Soxhlet extraction method
- BS-EN-ISO-14232-1 - Thermal spraying. Powders
- BS-EN-ISO-22068 - Sintered-metal injection-moulded materials. Specifications
- BS-EN-ISO-2738 - Sintered metal materials, excluding hardmetals. Permeable sintered metal materials. Determination of density, oil content and open porosity
- BS-EN-ISO-2739 - Sintered metal bushings. Determination of radial crushing strength
- BS-EN-ISO-2740 - Sintered metal materials, excluding hardmetals. Tensile test pieces
- BS-EN-ISO-28080 - Hardmetals. Abrasion tests for hardmetals
- BS-EN-ISO-3325 - Sintered metal materials, excluding hardmetals. Determination of transverse rupture strength
- BS-EN-ISO-3326 - Hardmetals. Determination of (the magnetization) coercivity
- BS-EN-ISO-3327 - Hardmetals. Determination of transverse rupture strength
- BS-EN-ISO-3369 - Impermeable sintered metal materials and hardmetals. Determination of density
- BS-EN-ISO-3738-1 - Hardmetals. Rockwell hardness test (scale A)
- BS-EN-ISO-3738-2 - Hardmetals. Rockwell hardness test (scale A)
- BS-EN-ISO-3907 - Hardmetals. Determination of total carbon. Gravimetric method
- BS-EN-ISO-3908 - Hardmetals. Determination of insoluble (free) carbon. Gravimetric method
- BS-EN-ISO-3923-1 - Metallic powders. Determination of apparent density
- BS-EN-ISO-3923-1-TC - Tracked Changes. Metallic powders. Determination of apparent density
- BS-EN-ISO-3927 - Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression
- BS-EN-ISO-3927-TC - Tracked Changes. Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression
- BS-EN-ISO-3928 - Sintered metal materials, excluding hardmetals. Fatigue test pieces
- BS-EN-ISO-3928-TC - Tracked Changes. Sintered metal materials, excluding hardmetals. Fatigue test pieces
- BS-EN-ISO-3954 - Powders for powder metallurgical purposes. Sampling
- BS-EN-ISO-3995 - Metallic powders. Determination of green strength by transverse rupture of rectangular compacts
- BS-EN-ISO-3995-TC - Tracked Changes. Metallic powders. Determination of green strength by transverse rupture of rectangular compacts
- BS-EN-ISO-4022 - Permeable sintered metal materials. Determination of fluid permeability
- BS-EN-ISO-4022-TC - Tracked Changes. Permeable sintered metal materials. Determination of fluid permeability
- BS-EN-ISO-4489 - Hardmetals. Sampling and testing
- BS-EN-ISO-4490 - Metallic powders. Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- BS-EN-ISO-4490-TC - Tracked Changes. Metallic powders. Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- BS-EN-ISO-4491-1 - Metallic powders. Determination of oxygen content by reduction methods
- BS-EN-ISO-4491-2 - Metallic powders. Determination of oxygen content by reduction methods
- BS-EN-ISO-4491-2-TC - Tracked Changes. Metallic powders. Determination of oxygen content by reduction methods
- BS-EN-ISO-4491-3 - Metallic powders. Determination of oxygen content by reduction methods
- BS-EN-ISO-4491-4 - Metallic powders. Determination of oxygen content by reduction methods
- BS-EN-ISO-4492 - Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
- BS-EN-ISO-4492-TC - Tracked Changes. Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
- BS-EN-ISO-4496 - Metallic powders. Determination of acid-insoluble content in iron, copper, tin and bronze powders
- BS-EN-ISO-4497 - Metallic powders. Determination of particle size by dry sieving
- BS-EN-ISO-4498 - Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness
- BS-EN-ISO-4499-1 - Hardmetals. Metallographic determination of microstructure
- BS-EN-ISO-4499-2 - Hardmetals. Metallographic determination of microstructure
- BS-EN-ISO-4499-3 - Hardmetals. Metallographic determination of microstructure
- BS-EN-ISO-4499-4 - Hardmetals. Metallographic determination of microstructure
- BS-EN-ISO-4507 - Sintered ferrous materials, carburized or carbonitrided. Determination and verification of case-hardening depth by a micro-hardness test
- BS-EN-ISO-4884 - Hardmetals. Sampling and testing of powders using sintered test pieces
- BS-EN-ISO-5754 - Sintered metal materials, excluding hardmetals. Unnotched impact test piece
- BS-EN-ISO-5754-TC - Tracked Changes. Sintered metal materials, excluding hardmetals. Unnotched impact test piece
- BS-EN-ISO-5755 - Sintered metal material. Specifications
- BS-EN-ISO-5755-TC - Tracked Changes. Sintered metal material. Specifications
- BS-EN-ISO-5842 - Powder metallurgy. Hot isostatic pressing. Argon detection using gas chromatography and mass spectrometry techniques
- BS-EN-ISO-7625 - Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
- BS-ISO-11873 - Hardmetals. Determination of sulfur and carbon contents in cobalt metal powders. Infrared detection method
- BS-ISO-11877 - Hardmetals. Determination of silicon in cobalt metal powders. Photometric method
- BS-ISO-13947 - Metallic powders. Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
- BS-ISO-14168 - Metallic powders, excluding hardmetals. Method for testing copper-base infiltrating powders
- BS-ISO-14317 - Sintered metal materials excluding hardmetals. Determination of compressive yield strength
- BS-ISO-17352 - Hardmetals. Determination of silicon in cobalt metal powders using graphite-furnace atomic absorption
- BS-ISO-18549-1 - Metallic powders. Determination of apparent density and flow rate at elevated temperatures
- BS-ISO-18549-2 - Metallic powders. Determination of apparent density and flow rate at elevated temperatures
- BS-ISO-22068 - Sintered-metal injection-moulded materials. Specifications
- BS-ISO-22394 - Hardmetals. Knoop hardness test
- BS-ISO-23519 - Sintered metal materials, excluding hardmetals. Measurement of surface roughness
- BS-ISO-26482 - Hardmetals. Determination of lead and cadmium content
- BS-ISO-28080 - Hardmetals. Abrasion tests for hardmetals
- BS-ISO-28279 - Sintered metal materials. Determination of the level of cleanliness of powder-metallurgy parts
- BS-ISO-4498 - Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness
- BS-ISO-5842 - Powder metallurgy. Hot isostatic pressing. Argon detection using gas chromatography and mass spectrometry techniques
- BS-ISO-7625 - Sintered Metal Materials, Excluding Hardmetals, Preparation of Samples for Chemical A
- PD-ISO-14232-2 - Thermal spraying. Powders
ISO:
- ISO-10070 - Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
- ISO-10076 - Metallic powders - Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement
- ISO-11873 - Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method
- ISO-11876 - Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method
- ISO-11877 - Hardmetals - Determination of silicon in cobalt metal powders - Photometric method
- ISO-13517 - Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter)
- ISO-13944 - Lubricated metal-powder mixes - Determination of lubricant content - Soxhlet extraction method
- ISO-13947 - Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
- ISO-14168 - Metallic powders, excluding hardmetals - Method for testing copper-base infiltrating powders
- ISO-14317 - Sintered metal materials excluding hardmetals - Determination of compressive yield strength
- ISO-14321 - Sintered metal materials, excluding hardmetals - Metallographic preparation and examination
- ISO-17352 - Hardmetals - Determination of silicon in cobalt metal powders using graphite-furnace atomic absorption
- ISO-18549-1 - Metallic powders - Determination of apparent density and flow rate at elevated temperatures - Part 1: Determination of apparent density at elevated temperatures
- ISO-18549-2 - Metallic powders - Determination of apparent density and flow rate at elevated temperatures - Part 2: Determination of flow rate at elevated temperatures
- ISO-22068 - Sintered-metal injection-moulded materials - Specifications
- ISO-22394 - Hardmetals - Knoop hardness test
- ISO-23519 - Sintered metal materials, excluding hardmetals - Measurement of surface roughness
- ISO-26482 - Hardmetals - Determination of lead and cadmium content
- ISO-2738 - Sintered metal materials, excluding hardmetals -- Permeable sintered metal materials -- Determination of density, oil content and open porosity
- ISO-2739 - Sintered metal bushings - Determination of radial crushing strength
- ISO-2740 - Sintered metal materials, excluding hardmetals - Tensile test pieces
- ISO-28079 - Hardmetals - Palmqvist toughness test
- ISO-28080 - Hardmetals - Abrasion tests for hardmetals
- ISO-28279 - Sintered metal materials - Determination of the level of cleanliness of powder-metallurgy parts
- ISO-3252 - Powder metallurgy - Vocabulary
- ISO-3312 - Sintered metal materials and hardmetals - Determination of Young modulus
- ISO-3325 - Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength
- ISO-3325-1 - Precision statement
- ISO-3326 - Hardmetals - Determination of (the magnetization) coercivity
- ISO-3327 - Hardmetals - Determination of transverse rupture strength
- ISO-3369 - Impermeable sintered metal materials and hardmetals - Determination of density
- ISO-3738-1 - Hardmetals - Rockwell hardness test (scale A) - Part 1 : Test method
- ISO-3738-2 - Hardmetals - Rockwell hardness test (scale A) - Part 2 : Preparation and calibration of standard test blocks
- ISO-3878 - Hardmetals - Vickers hardness test
- ISO-3907 - Hardmetals - Determination of total carbon - Gravimetric method
- ISO-3908 - Hardmetals - Determination of insoluble (free) carbon - Gravimetric method
- ISO-3909 - Hardmetals - Determination of cobalt - Potentiometric method
- ISO-3923-1 - Metallic powders - Determination of apparent density - Part 1: Funnel method
- ISO-3923-2 - Metallic powders - Determination of apparent density - Part 2 : Scott volumeter method
- ISO-3927 - Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
- ISO-3928 - Sintered metal materials, excluding hardmetals - Fatigue test pieces
- ISO-3953 - Metallic powders - Determination of tap density
- ISO-3954 - Powders for powder metallurgical purposes - Sampling
- ISO-3995 - Metallic powders - Determination of green strength by transverse rupture of rectangular compacts
- ISO-4003 - Permeable sintered metal materials - Determination of bubble test pore size
- ISO-4022 - Permeable sintered metal materials - Determination of fluid permeability
- ISO-4489 - Hardmetals - Sampling and testing
- ISO-4490 - Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- ISO-4491-1 - Metallic powders - Determination of oxygen content by reduction methods - Part 1: General guidelines
- ISO-4491-2 - Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss)
- ISO-4491-3 - Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen
- ISO-4491-4 - Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction
- ISO-4492 - Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering
- ISO-4496 - Metallic powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders
- ISO-4497 - Metallic powders - Determination of particle size by dry sieving
- ISO-4498 - Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
- ISO-4499-1 - Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description
- ISO-4499-2 - Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size
- ISO-4499-3 - Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
- ISO-4499-4 - Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content
- ISO-4501 - Hardmetals - Determination of titanium - Photometric peroxide method
- ISO-4503 - Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method
- ISO-4505 - Hardmetals - Metallographic determination of porosity and uncombined carbon
- ISO-4506 - Hardmetals - Compression test
- ISO-4507 - Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test
- ISO-4883 - Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Solution method
- ISO-4884 - Hardmetals - Sampling and testing of powders using sintered test pieces
- ISO-5754 - Sintered metal materials, excluding hardmetals - Unnotched impact test piece
- ISO-5755 - Sintered metal material - Specifications
- ISO-5842 - Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques
- ISO-7625 - Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
- ISO-7627-1 - Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 1 : General requirements
- ISO-7627-2 - Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 2 : Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m)
- ISO-7627-3 - Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 3 : Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m)
- ISO-7627-4 - Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 4 : Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m)
- ISO-7627-5 - Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 5 : Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m)
- ISO-7627-6 - Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 6 : Determination of chromium in contents from 0,01 to 2 % (m/m)
Other SDOs:
- DIN-EN-1274 - Thermal Spraying - Powders, Composition, Technical Supply Conditions
- DIN-EN-ISO-13944 - Lubricated metal-powder mixes - Determination of lubricant content - Soxhlet extraction method (ISO 13944:2012)
- DIN-EN-ISO-2740 - Sintered Metal Materials, Excluding Hardmetals - Tensile Test Pieces
- DIN-EN-ISO-3325 - Sintered Metal Materials, Excluding Hardmetals, Determination of Transverse Rupture St
- DIN-EN-ISO-3738-2 - Part 2: Preparation & Calibration of Standard Test Blocks, Hardmetals - Rockwell Hardn
- DIN-EN-ISO-3927 - Metallic Powders, Excluding Powders for Hardmetals - Determination of Compressibility
- DIN-EN-ISO-3928 - Sintered metal materials, excluding hardmetals - Fatigue test pieces
- DIN-EN-ISO-4022 - Permeable Sintered Metal Materials - Determination of Fluid Permeability
- DIN-EN-ISO-4490 - Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- DIN-EN-ISO-4491-3 - Part 3: Hydrogen-Reducible Oxygen, Metallic Powders - Determination of Oxygen Content
- DIN-EN-ISO-4498 - Sintered Metal Materials, Excluding Hardmetals - Determination of Apparent Hardness &
- DIN-EN-ISO-4507 - Sintered Ferrous Materials, Carburized or Carbonitrided - Determination & Verification
- DIN-ISO-14168 - Metallic Powders, Excluding Hardmetals, Method for Testing Copper-Base Infiltrating Po
- DIN-ISO-4498 - Sintered Metal Materials, Excluding Hardmetals - Determination of Apparent Hardness &
- DIN-ISO-5755 - Sintered Metal Materials, Specifications
- EN-1274 - Thermal Spraying - Powders, Composition, Technical Supply Conditions
- EN-24003 - Permeable Sintered Metal Materials, Determination of Bubble Test Pore Size
- EN-ISO-11876 - Hardmetals - Determination of Calcium, Copper, Iron, Potassium, Magnesium, Manganese,
- EN-ISO-13517 - Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2013)
- EN-ISO-13944 - Lubricated metal-powder mixes - Determination of lubricant content - Soxhlet extraction method (ISO 13944:2012)
- EN-ISO-22068 - Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)
- EN-ISO-2738 - Sintered Metal Materials, Excluding Hardmetals, Permeable Sintered Metal Materials - D
- EN-ISO-2739 - Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012)
- EN-ISO-2740 - Sintered Metal Materials, Excluding Hardmetals - Tensile Test Pieces
- EN-ISO-3326 - Hardmetals - Determination of (the magnetization) coercivity (ISO 3326:2013)
- EN-ISO-3327 - Hardmetals - Determination of Transverse Rupture Strength
- EN-ISO-3369 - Impermeable Sintered Metal Materials & Hardmetals - Determination of Density
- EN-ISO-3738-1 - Part 1: Test Method, Hardmetals - Rockwell Hardness Test (Scale a)
- EN-ISO-3738-2 - Part 2: Preparation & Calibration of Standard Test Blocks, Hardmetals - Rockwell Hardn
- EN-ISO-3907 - Hardmetals - Determination of Total Carbon - Gravimetric Method
- EN-ISO-3908 - Hardmetals. Determination of Insoluble (Free) Carbon Content. Gravimetric Method
- EN-ISO-3923-1 - Part 1: Funnel, Metallic Powders - Determination of Apparent Density
- EN-ISO-3927 - Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
- EN-ISO-3928 - Sintered metal materials, excluding hardmetals - Fatigue test pieces
- EN-ISO-3953 - Metallic powders - Determination of tap density (ISO 3953:2011)
- EN-ISO-3954 - Powders for Powder Metallurgical Purposes, Sampling
- EN-ISO-4022 - Permeable Sintered Metal Materials - Determination of Fluid Permeability
- EN-ISO-4490 - Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- EN-ISO-4491-3 - Part 3: Hydrogen-Reducible Oxygen, Metallic Powders - Determination of Oxygen Content
- EN-ISO-4491-4 - Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction (ISO 4491-4:2013)
- EN-ISO-4492 - Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2013)
- EN-ISO-4496 - Metallic powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders
- EN-ISO-4498 - Sintered Metal Materials, Excluding Hardmetals - Determination of Apparent Hardness &
- EN-ISO-4499-1 - Part 1: Photomicrographs & Description, Hardmetals - Metallographic Determination of M
- EN-ISO-4499-3 - Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
- EN-ISO-4499-4 - Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content
- EN-ISO-4506 - Hard metals - Compression test
- EN-ISO-4507 - Sintered Ferrous Materials, Carburized or Carbonitrided, Determination & Verification
- EN-ISO-5754 - Sintered metal materials, excluding hardmetals. Unnotched impact test piece
- EN-ISO-5755 - Sintered metal materials - Specifications (ISO 5755:2012)
- EN-ISO-7625 - Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
- JIS-Z-2502 - Metallic powders -- Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- JIS-Z-2504 - Metallic powders -- Determination of apparent density
- JIS-Z-2508 - Metallic powders, excluding powders for hardmetals -- Determination of compressibility in uniaxial compression
- JIS-Z-2509 - Metallic powders, excluding powders for hardmetals -- Determination of dimensional changes associated with compacting and sintering
- JIS-Z-2510 - Metallic powders -- Determination of particle size by dry sieving
- JIS-Z-2512 - Metallic powders -- Determination of tap density
- SIS-ISO/TR-14321 - Sintered metal materials, excluding hardmetals - Metallographic preparation and examination
- SS-118000 - Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques
- SS-EN-1274 - Thermal spraying - Powders - Composition, technical supply conditions
- SS-EN-1369 - Founding - Magnetic particle testing
- SS-EN-17399 - Algae and algae products - Terms and definitions
- SS-EN-23312 - Sintered metal materials and hardmetals - Determination of Young modulus
- SS-EN-23326 - Hardmetals - Determination of (the magnetization)coercivity (ISO 3326:1975)
- SS-EN-23327 - Hardmetals - Determination of transverse rupture strenght
- SS-EN-23369 - Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:1975)
- SS-EN-23878 - Hardmetals - Vickers hardness test (ISO 3878:1983)
- SS-EN-23907 - Hardmetals - Determination of total carbon content - Gravimetric method (ISO 3907:1985)
- SS-EN-23908 - Hardmetals - Determination of insoluble (free) carbon content - Gravimetric method (ISO 3908:1985)
- SS-EN-23909 - Hardmetals - Determination of cobalt - Potentiometric method
- SS-EN-23923-1 - Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:1979)
- SS-EN-23923-2 - Metallic powders - Determination of apparent density - Part 2: Scott volumeter method (ISO 3923-2:1981)
- SS-EN-23927 - Metallic powders, excluding powders for hardmetals - Determination of compactibility (Compressibility) in uniaxial compression
- SS-EN-23954 - Powders for powder metallurgical purposes - Sampling (ISO 3954:1977)
- SS-EN-23995 - Metallic powders - Determination of green strength by transverse rupture of rectangular compacts
- SS-EN-24003 - Permeable sintered metal materials - Determination of bubble test pore size (ISO 4003:1977)
- SS-EN-24489 - Sintered hardmetals - Sampling and testing (ISO 4489:1978)
- SS-EN-24491-1 - Metallic powders - Determination of oxygen content by reduction methods - Part 1: General guidelines (ISO 4491-1:1989)
- SS-EN-24491-2 - Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:1989)
- SS-EN-24491-4 - Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction (ISO 4491-4:1989)
- SS-EN-24492 - Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:1985)
- SS-EN-24496 - Metallic powders - Determination of acid insoluble content in iron, copper, tin and bronze powders (ISO 4496:1978)
- SS-EN-24497 - Metallic powders - Determination of particle sizeby dry sieving
- SS-EN-24498-1 - Sintered metal materials, excluding hardmetals - Determination of apparent hardness - Part 1: Materials of essentially uniform section hardness
- SS-EN-24499 - Hardmetals - Metallographic determination of microstructure (ISO 4499:1978)
- SS-EN-24501 - Hardmetals - Determination of titanium - Photometric peroxide method
- SS-EN-24503 - Hard metals - Determination of contents of metallic elements by X-ray flourescence - Fusion method (ISO 4503:1978)
- SS-EN-24505 - Hardmetals - Metallographic determination of porosity and uncombined carbon (ISO 4505:1978)
- SS-EN-24506 - Hardmetals - Compression test (ISO 4506:1979)
- SS-EN-24883 - Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Solution method(ISO 4883:1978)
- SS-EN-24884 - Hardmetals - Sampling and testing of powders using sintered test pieces (ISO 4884:1978)
- SS-EN-25754 - Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:1978)
- SS-EN-27627-1 - Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 1: General requirements (ISO 7627-1:1983)
- SS-EN-27627-2 - Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 2: Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) (ISO 7627-2:1983)
- SS-EN-27627-3 - Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 3: Determination of cobalt, iron, manganese and nickel in contents from0,01 to 0,5 % (m/m) (ISO 7627-3:1983)
- SS-EN-27627-4 - Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 4: Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m) (ISO 7627-4:1983)
- SS-EN-27627-5 - Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) (ISO 7627-5:1983)
- SS-EN-27627-6 - Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 6: Determination of chromium in contents from 0,01 to 2 % (m/m) (ISO 7627-6:1985)
- SS-EN-ISO-10070 - Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:2019)
- SS-EN-ISO-11876 - Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010)
- SS-EN-ISO-13517 - Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)
- SS-EN-ISO-13944 - Lubricated metal-powder mixes - Determination of lubricant content - Soxhlet extraction method (ISO 13944:2012)
- SS-EN-ISO-22068 - Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)
- SS-EN-ISO-2738 - Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999)
- SS-EN-ISO-2739 - Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012)
- SS-EN-ISO-2740 - Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2023)
- SS-EN-ISO-28080 - Hardmetals - Abrasion tests for hardmetals (ISO 28080:2021)
- SS-EN-ISO-3252 - Powder metallurgy - Vocabulary (ISO 3252:2023)
- SS-EN-ISO-3325 - Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996)
- SS-EN-ISO-3325-AM1 - Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength - Amendment 1 - Precision statement (ISO 3325:1996/Amd 1:2001)
- SS-EN-ISO-3326 - Hardmetals - Determination of (the magnetization) coercivity (ISO 3326:2013)
- SS-EN-ISO-3327 - Hardmetals - Determination of transverse rupture strength (ISO 3327:2009)
- SS-EN-ISO-3369 - Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006)
- SS-EN-ISO-3738-1 - Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982)
- SS-EN-ISO-3738-2 - Hardmetals - Rockwell hardness test (scale A) - Part 2: Preparation and calibration of standard test blocks (ISO 3738-2:1988)
- SS-EN-ISO-3907 - Hardmetals - Determination of total carbon - Gravimetric method (ISO 3907:2009)
- SS-EN-ISO-3908 - Hardmetals - Determination of insoluble (free) carbon - Gravimetric method (ISO 3908:2009)
- SS-EN-ISO-3923-1 - Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2018)
- SS-EN-ISO-3927 - Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2017)
- SS-EN-ISO-3928 - Sintered metal materials, excluding hardmetals - Fatigue test pieces (ISO 3928:2016)
- SS-EN-ISO-3953 - Metallic powders - Determination of tap density (ISO 3953:2011)
- SS-EN-ISO-3954 - Powders for powder metallurgical purposes - Sampling (ISO 3954:2007)
- SS-EN-ISO-3995 - Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:2023)
- SS-EN-ISO-4022 - Permeable sintered metal materials - Determination of fluid permeability (ISO 4022:2018)
- SS-EN-ISO-4489 - Hardmetals - Sampling and testing (ISO 4489:2019)
- SS-EN-ISO-4490 - Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2018)
- SS-EN-ISO-4491-1 - Metallic powders - Determination of oxygen content by reduction methods - Part 1: General guidelines (ISO 4491-1:2023)
- SS-EN-ISO-4491-2 - Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:1997)
- SS-EN-ISO-4491-3 - Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen (ISO 4491-3:1997)
- SS-EN-ISO-4491-4 - Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction (ISO 4491-4:2019)
- SS-EN-ISO-4492 - Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2017)
- SS-EN-ISO-4496 - Metallic powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders (ISO 4496:2017)
- SS-EN-ISO-4497 - Metallic powders - Determination of particle size by dry sieving (ISO 4497:2020)
- SS-EN-ISO-4498 - Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
- SS-EN-ISO-4499-1 - Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020)
- SS-EN-ISO-4499-2 - Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020)
- SS-EN-ISO-4499-3 - Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals (ISO 4499-3:2016)
- SS-EN-ISO-4499-4 - Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content (ISO 4499-4:2016)
- SS-EN-ISO-4506 - Hardmetals - Compression test (ISO 4506:2018)
- SS-EN-ISO-4507 - Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000)
- SS-EN-ISO-4884 - Hardmetals - Sampling and testing of powders using sintered test pieces (ISO 4884:2019)
- SS-EN-ISO-5754 - Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:2023)
- SS-EN-ISO-5755 - Sintered metal material - Specifications (ISO 5755:2022)
- SS-EN-ISO-5842 - Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022)
- SS-EN-ISO-7625 - Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
- SS-ISO-10070 - Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:1991, IDT)
- SS-ISO-10076 - Metallic powders - Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement (ISO 10076:1991, IDT)
- SS-ISO-11873 - Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method (ISO 11873:2005, IDT)
- SS-ISO-11877 - Hardmetals - Determination of silicon in cobalt metal powders - Photometric method (ISO 11877:2008, IDT)
- SS-ISO-13944 - Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhlet extraction method
- SS-ISO-13947 - Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen (ISO 13947:2011, IDT)
- SS-ISO-14168 - Metallic powders, excluding hardmetals - Method for testing copper-base infiltrating powders (ISO 14168:2011, IDT)
- SS-ISO-14317 - Sintered metal materials excluding hardmetals - Determination of compressive yield strength (ISO 14317:2015, IDT)
- SS-ISO-17352 - Hardmetals - Determination of silicon in cobalt metal powders using graphite-furnace atomic absorption (ISO 17352:2008, IDT)
- SS-ISO-18549-1 - Metallic powders - Determination of apparent density and flow rate at elevated temperatures - Part 1: Determination of apparent density at elevated temperatures (ISO 18549-1:2009, IDT)
- SS-ISO-18549-2 - Metallic powders - Determination of apparent density and flow rate at elevated temperatures - Part 2: Determination of flow rate at elevated temperatures (ISO 18549-2:2009, IDT)
- SS-ISO-22068 - Sintered-metal injection moulded materials - Specifications (ISO 22068:2012, IDT)
- SS-ISO-22394 - Hardmetals - Knoop hardness test (ISO 22394:2010, IDT)
- SS-ISO-23519 - Sintered metal materials, excluding hardmetals - Measurement of surface roughness (ISO 23519:2010, IDT)
- SS-ISO-26482 - Hardmetals - Determination of lead and cadmium content (ISO 26482:2010, IDT)
- SS-ISO-2738 - Permeable sintered metal materials - Determination of density, oil content, and open porosity
- SS-ISO-28079 - Hardmetals - Palmqvist toughness test (ISO 28079:2009, IDT)
- SS-ISO-28080 - Hardmetals - Abrasion tests for hardmetals (ISO 28080:2011, IDT)
- SS-ISO-28279 - Sintered metal materials - Determination of the level of cleanliness of powder-metallurgy parts (ISO 28279:2010, IDT)
- SS-ISO-3252 - Powder metallurgy - Vocabulary
- SS-ISO-3325 - Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength
- SS-ISO-3928 - Sintered metal materials, excluding hardmetals - Fatigue test pieces
- SS-ISO-4507 - Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test
- SS-ISO-5775-1 - Cycles - Bicycle tyres and rims - Part 1: Tyre designations and dimensions
- SS-ISO-5842 - Powder metallurgy Hot isostatic pressing Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022, IDT)