ASTM-F900 › Historical Revision Information
Standard Specification for Industrial and Commercial Swing Gates
The following bibliographic material is provided to assist you with your purchasing decision:
This specification covers detailed requirements for chain link fence gates, gate posts and accessories for both single and double swing-type gates for industrial and commercial application. All gate hardware shall be of sufficient strength and durability to support the gate and repeated open-close cycles. Gate hinges shall be structurally capable of supporting the gate leaf and allow the gate to open and close without binding. Single gate latch shall be capable of retaining the gate in a closed position and shall have provision for a padlock. Double gate latch shall be a drop rod or plunger bar arranged to engage the gate stop. Locking devices shall be constructed so that the center drop rod or plunger bar cannot be raised when the gate is locked. The latching devices shall have provision for a padlock. Gate stops shall be provided for all double gates and shall be suitable for setting in concrete for the center drop rod or plunger. Gate keepers shall consist of a mechanical device for securing the free end of the gate when in full open position.
Scope
1.1 This specification covers detailed requirements for chain link fence gates, gate posts and accessories for both single and double swing-type gates for industrial and commercial application.
Keywords
drop rod; gate leaf; hinges; keepers; latch; plunger; polymer; truss rods; ICS Number Code 91.060.50 (Doors and windows)
To find similar documents by ASTM Volume:
To find similar documents by classification:
This document comes with our free Notification Service, good for the life of the document.
This document is available in either Paper or PDF format.
Document Number
ASTM-F900-05
Revision Level
2005 EDITION
Status
Superseded
Modification Type
Revision
Publication Date
July 1, 2005
Document Type
Specification
Page Count
3 pages
Committee Number
F14.40