Document Center List of Standards on Doors And Windows Including Doorsets, Their Components, Blinds, Shutters Door And Window Hardware, See 91.190
ICS Code 91.060.50
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1199 - Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
- ASTM-C1503 - Standard Specification for Silvered Flat Glass Mirror
- ASTM-C964 - Standard Guide for Lock-Strip Gasket Glazing
- ASTM-D4099 - Standard Specification for Poly(Vinyl Choride)(PVC) Prime Windows and Sliding Glass Doors (Withdrawn 1999)
- ASTM-D4726 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
- ASTM-D4973 - Specification for White Rigid Poly(Vinyl Chloride)(PVC) Insulating Storm Windows (Withdrawn 1999)
- ASTM-E1017 - Standard Specification for Generic Performance Requirements for Exterior Residential Window Assemblies (Withdrawn 2003)
- ASTM-E1105 - Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
- ASTM-E1233 - Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
- ASTM-E1423 - Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
- ASTM-E1424 - Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
- ASTM-E1425 - Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
- ASTM-E1748 - Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
- ASTM-E1886 - Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
- ASTM-E1996 - Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
- ASTM-E2068 - Standard Test Method for Determination of Operating Force of Sliding Windows and Doors
- ASTM-E2112 - Standard Practice for Installation of Exterior Windows, Doors and Skylights
- ASTM-E2264 - Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
- ASTM-E2268 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
- ASTM-E2319 - Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
- ASTM-E2395 - Standard Specification for Voluntary Security Performance of Window and Door Assemblies with Glazing Impact
- ASTM-E2692 - Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products
- ASTM-E2964 - Standard Test Method for Measurement of the Normalized Insertion Loss of Doors
- ASTM-E330 - Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
- ASTM-E331 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
- ASTM-E405 - Standard Test Methods for Wear Testing Rotary Operators for Windows
- ASTM-E546 - Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
- ASTM-E547 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
- ASTM-E576 - Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
- ASTM-E773 - Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units (Withdrawn 2010)
- ASTM-E783 - Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
- ASTM-E987 - Standard Test Methods for Deglazing Force of Fenestration Products
- ASTM-F1196 - Standard Specification for Sliding Watertight Door Assemblies
- ASTM-F1450 - Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities
- ASTM-F1758 - Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
- ASTM-F1915 - Standard Test Methods for Glazing for Detention Facilities
- ASTM-F2006 - Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows
- ASTM-F2090 - Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms
- ASTM-F2200 - Standard Specification for Automated Vehicular Gate Construction
- ASTM-F2247 - Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)
- ASTM-F2927 - Standard Test Method for Door Systems Subject to Airblast Loadings
- ASTM-F3038 - Standard Test Method for Timed Evaluation of Forced-Entry-Resistant Systems
- ASTM-F476 - Standard Test Methods for Security of Swinging Door Assemblies
- ASTM-F588 - Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
- ASTM-F842 - Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
- ASTM-F900 - Standard Specification for Industrial and Commercial Steel Swing Gates
BSI:
- BS-1245 - Pedestrian doorsets and door frames made from steel sheet. Specification
- BS-1567 - Specification for wood door frames and linings
- BS-3415 - Specification for venetian blinds
- BS-459 - Specification for matchboarded wooden door leaves for external use
- BS-4873 - Aluminium alloy windows and doorsets. Specification
- BS-4873-TC - Tracked Changes. Aluminium alloy windows and doorsets. Specification
- BS-5368-1 - Methods of testing windows. Air permeability test
- BS-5368-2 - Methods of testing windows. Watertightness test under static pressure
- BS-5368-3 - Methods of testing windows. Wind resistance tests
- BS-5642-1 - Sills, copings and cappings
- BS-5713 - Specification for hermetically sealed flat double glazing units
- BS-6375-1 - Performance of windows and doors
- BS-6375-2 - Performance of windows and doors
- BS-6375-3 - Performance of windows and doors
- BS-644 - Timber windows and doorsets. Fully finished factory-assembled windows and doorsets of various types. Specification
- BS-6462 - Specification for mechanical performance of peg-type casement stays and face-fixed wedge-action fasteners
- BS-7036-0 - Power operated pedestrian doorsets. Safety in use
- BS-7036-1 - Code of practice for safety at powered doors for pedestrian use. General
- BS-7036-2 - Code of practice for safety at powered doors for pedestrian use. Straight and curved sliding doors and prismatic and folding doors
- BS-7036-3 - Code of practice for safety at powered doors for pedestrian use. Swing doors and balanced doors
- BS-7036-4 - Code of practice for safety at powered doors for pedestrian use. Low energy swing doors
- BS-7036-5 - Code of practice for safety at powered doors for pedestrian use. Revolving doors
- BS-7412 - Specification for windows and doorsets made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles
- BS-7413 - Unplasticized polyvinyl chloride (PVC-U) profiles for windows and doors. Specification
- BS-7722 - Surface covered PVC-U profiles for windows and doorsets. Specification
- BS-7950 - Specification for enhanced security performance of windows for domestic applications
- BS-8206-2 - Lighting for buildings
- BS-8213-4 - Windows and doors
- BS-8214 - Timber-based fire door assemblies. Code of practice
- BS-8529 - Composite doorsets. Domestic external doorsets, Specification
- BS-8529-TC - Tracked Changes. Composite doorsets. Domestic external doorsets, Specification
- BS-8613 - Finger protection devices for pedestrian doors. Specification
- BS-EN-1026 - Windows and doors. Air permeability. Test method
- BS-EN-1027 - Windows and doors. Water tightness. Test method
- BS-EN-1191 - Windows and doors. Resistance to repeated opening and closing. Testmethod
- BS-EN-1192 - Doors. Classification of strength requirements
- BS-EN-12045 - Shutters and blinds power operated. Safety in use. Measurement of the transmitted force
- BS-EN-12046-2 - Operating forces. Test method
- BS-EN-12194 - Shutters, external and internal blinds. Misuse. Test methods
- BS-EN-12207 - Windows and doors. Air permeability. Classification
- BS-EN-12207-TC - Tracked Changes. Windows and doors. Air permeability. Classification
- BS-EN-12208 - Windows and doors. Watertightness. Classification
- BS-EN-12210 - Windows and doors. Resistance to wind load. Classification
- BS-EN-12210-TC - Tracked Changes. Windows and doors. Resistance to wind load. Classification
- BS-EN-12211 - Windows and doors. Resistance to wind load. Test method
- BS-EN-12211-TC - Tracked Changes. Windows and doors. Resistance to wind load. Test method
- BS-EN-12216 - Shutters, external blinds, internal blinds. Terminology, glossary and definitions
- BS-EN-12216-TC - Tracked Changes. Shutters, external blinds, internal blinds. Terminology, glossary and definitions
- BS-EN-12217 - Doors. Operating forces. Requirements and classification
- BS-EN-12217-TC - Tracked Changes. Doors. Operating forces. Requirements and classification
- BS-EN-12219 - Doors. Climatic influences. Requirements and classification
- BS-EN-12400 - Windows and pedestrian doors. Mechanical durability. Requirements and classification
- BS-EN-12424 - Industrial, commercial and garage doors and gates. Resistance to wind load. Classification
- BS-EN-12425 - Industrial, commercial and garage doors and gates. Resistance to water penetration. Classification
- BS-EN-12426 - Industrial, commercial and garage doors and gates. Air permeability. Classification
- BS-EN-12427 - Industrial, commercial and garage doors and gates. Air permeability. Test method
- BS-EN-12428 - Industrial, commercial and garage doors. Thermal transmittance. Requirements for the calculation
- BS-EN-12433-1 - Industrial, commercial, and garage doors and gates. Terminology. Types of doors
- BS-EN-12433-2 - Industrial, commercial, and garage doors and gates. Terminology. Parts of doors
- BS-EN-12444 - Industrial, commercial and garage doors and gates. Resistance to wind load. Testing and calculation
- BS-EN-12445 - Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Test methods
- BS-EN-12453 - Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Requirements and test methods
- BS-EN-12489 - Industrial, commercial and garage doors and gates. Resistance to water penetration. Test method
- BS-EN-12604 - Industrial, commercial and garage doors and gates. Mechanical aspects. Requirements and test methods
- BS-EN-12605 - Industrial, commercial and garage doors and gates. Mechanical aspects. Test methods
- BS-EN-12608 - Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods
- BS-EN-12608-1 - Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods
- BS-EN-12635 - Industrial, commercial and garage doors and gates. Installation and use
- BS-EN-12833 - Skylight and conservatory roller shutters. Resistance to snow load. Test method
- BS-EN-12835 - Airtight shutters. Air permeability test
- BS-EN-1294 - Door leaves. Determination of the behaviour under humidity variations in successive uniform climates
- BS-EN-12978 - Industrial, commercial and garage doors and gates. Safety devices for power operated doors and gates. Requirements and test methods
- BS-EN-13115 - Windows. Classification of mechanical properties. Racking, torsion and operating forces
- BS-EN-13120 - Internal blinds. Performance requirements including safety
- BS-EN-13123-1 - Windows, doors and shutters. Explosion resistance. Requirements and classification
- BS-EN-13124-1 - Windows, doors and shutters. Explosion resistance. Test method
- BS-EN-13125 - Shutters and blinds. Additional thermal resistance. Allocation of a class of air permeability to a product
- BS-EN-13330 - Shutters. Hard body impact and prevention of access. Test methods
- BS-EN-13527 - Shutters and blinds. Measurement of operating force. Test methods
- BS-EN-13561 - External blinds and awnings. Performance requirements including safety
- BS-EN-13659 - Shutters and external venetian blinds. Performance requirements including safety
- BS-EN-13659-TC - Tracked Changes. Shutters and external venetian blinds. Performance requirements including safety
- BS-EN-14024 - Metal profiles with thermal barrier. Mechanical performance. Requirements, proof and tests for assessment
- BS-EN-14220 - Timber and wood-based materials in external windows, external door leaves and external doorframes. Requirements and specifications
- BS-EN-14221 - Timber and wood-based materials in internal windows, internal door leaves and internal doorframes. Requirements and specifications
- BS-EN-14351-1 - Windows and doors. Product standard, performance characteristics
- BS-EN-14351-2 - Windows and doors. Product standard, performance characteristics
- BS-EN-14500 - Blinds and shutters. Thermal and visual comfort. Test and calculation methods
- BS-EN-14501 - Blinds and shutters. Thermal and visual comfort. Performance characteristics and classification
- BS-EN-14600 - Doorsets and openable windows with fire resisting and/ or smoke control characteristics. Requirements and classification
- BS-EN-14608 - Windows. Determination of resistance to racking
- BS-EN-14609 - Windows. Determination of the resistance to static torsion
- BS-EN-14637 - Building hardware. Electrically controlled hold-open systems for fire/smoke door assemblies. Requirements, test methods, application and maintenance
- BS-EN-14759 - Shutters. Acoustic insulation relative to airborne sound. Expression of performance
- BS-EN-15269-1 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-15269-11 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-15269-2 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-15269-20 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-15269-3 - Extended application of test results for fire resistance and/or smoke control for doorsets, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-15269-3-TC - Tracked Changes. Extended application of test results for fire resistance and/or smoke control for doorsets, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-15269-5 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-15269-7 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-1529 - Door leaves. Height, width, thickness and squareness. Tolerance classes
- BS-EN-1530 - Door leaves. General and local flatness. Tolerance classes
- BS-EN-16005 - Power operated pedestrian doorsets. Safety in use. Requirements and test methods
- BS-EN-16034 - Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics
- BS-EN-1627 - Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Requirements and classification
- BS-EN-1628 - Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Test method for the determination of resistance under static loading
- BS-EN-16281 - Child protective products. Consumer fitted child resistant locking devices for windows and balcony doors. Safety requirements and test methods
- BS-EN-1629 - Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Test method for the determination of resistance under dynamic loading
- BS-EN-1630 - Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Test method for the determination of resistance to manual burglary attempts
- BS-EN-1634-1 - Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware
- BS-EN-1634-2 - Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware
- BS-EN-1634-3 - Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware
- BS-EN-16361 - Power operated pedestrian doors. Product standard, performance characteristics. Pedestrian doorsets, other than swing type, initially designed for installation with power operation
- BS-EN-16433 - Internal blinds. Protection from strangulation hazards. Test methods
- BS-EN-16434 - Internal blinds. Protection from strangulation hazards. Requirements and test methods for safety devices
- BS-EN-16580 - Windows and doors. Wetness and splash water proof door leaves. Test and classification
- BS-EN-16654 - Child protective products. Consumer fitted finger protection devices for doors. Safety requirements and test methods
- BS-EN-17020-1 - Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows
- BS-EN-17020-2 - Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows
- BS-EN-17020-5 - Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows
- BS-EN-17213 - Windows and doors. Environmental Product Declarations. Product category rules for windows and pedestrian doorsets
- BS-EN-17372 - Power operated pedestrian swing door drives with self closing function. Requirements and test methods
- BS-EN-17410 - Plastics. Controlled loop recycling of PVC-U profiles from windows and doors
- BS-EN-1932 - External blinds and shutters. Resistance to wind loads. Method of testing and performance criteria
- BS-EN-477-TC - Tracked Changes. Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of the resistance to impact of profiles by falling mass
- BS-EN-513-TC - Tracked Changes. Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of the resistance to artificial weathering
- BS-EN-514 - Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of the strength of welded corners and T-joints
- BS-EN-514-TC - Tracked Changes. Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of the strength of welded corners and T-joints
- BS-EN-60335-2-103 - Household and similar electrical appliances. Safety
- BS-EN-60335-2-97 - Household and similar electrical appliances. Safety
- BS-EN-947 - Hinged or pivoted doors. Determination of the resistance to vertical load
- BS-EN-951 - Door leaves. Method for measurement of height, width, thickness and squareness
- BS-EN-ISO-10077-1 - Thermal performance of windows, doors and shutters. Calculation of thermal transmittance
- BS-EN-ISO-10077-2 - Thermal performance of windows, doors and shutters. Calculation of thermal transmittance
- BS-EN-ISO-12567-1 - Thermal performance of windows and doors. Determination of thermal transmittance by the hot-box method
- BS-EN-ISO-12567-2 - Thermal performance of windows and doors. Determination of thermal transmittance by hot box method
- BS-ISO-19467 - Thermal performance of windows and doors. Determination of solar heat gain coefficient using solar simulator
- BS-ISO-19467-2 - Thermal Performance of windows and doors. Determination of solar heat gain coefficient using solar simulator
- BS-ISO-22496 - Windows and pedestrian doors. Vocabulary
- BS-ISO-6613 - Windows and doors. Air permeability. Test method
- BS-ISO-8270 - Windows and doors. Determination of the resistance to soft and heavy body impact for doors
- BS-ISO-8275 - Hinged or pivoted doors. Determination of the resistance to vertical load
- CP-151-1 - Doors and windows including frames and linings. Wooden doors
- CP-153-2 - Windows and rooflights. Windows and rooflights. Durability and maintenance
- CP-153-3 - Windows and rooflights. Windows and rooflights. Sound insulation
- DD-171 - Guide to specifying performance requirements for hinged or pivoted doors (including test methods)
- DD-8455 - Materials for gaskets and weatherstripping for windows, doors, conservatories and curtain walling. Requirements and test methods
- DD-ENV-13420 - Windows, Behaviour Between Different Climates, Test Methods
- DD-ENV-1627 - Windows, Doors, Shutters - Burglar Resistance - Requirementsand Classification
- DD-ENV-1628 - Windows, doors, shutters. Burglar resistance. Test method for the determination of resistance under static loading
- DD-ENV-1629 - Windows, doors, shutters. Burglar resistance. Test method for determination of resistance under dynamic loading
- DD-ENV-1630 - Windows, doors, shutters. Burglar resistance. Test method for the determination of resistance to manual burglary attempts
- PAS-23-1 - General performance requirements for door assemblies
- PAS-24 - Enhanced security performance requirements for doorsets and windows in the UK. Doorsets and windows intended to offer a level of security suitable for dwellings and other buildings exposed to comparable risk
- PAS-24-1 - Enhanced security performance requirements for door assemblies. Single and double leaf, hinged external door assemblies to dwellings
- PD-CEN-16676 - Energy losses by industrial door
IEC:
- IEC-60335-2-103 - Amendment 2 - Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows
- IEC-60335-2-103-AM1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows
- IEC-60335-2-103-AM2 - Amendment 2 - Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows
- IEC-60335-2-97 - Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for shutters, awnings, blinds and similar equipment
- IEC-60335-2-97-1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
- IEC-60335-2-97-2 - Amendment 2 - Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
- IEC-60335-2-97-AM1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for shutters, awnings, blinds and similar equipment
ISO:
- ISO-10077-1 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General
- ISO-10077-2 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames
- ISO-1226 - Symbolic designation of direction of closing and faces of doors, windows and shutters
- ISO-12567-1 - Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors
- ISO-12567-2 - Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows
- ISO-15099 - Thermal performance of windows, doors and shading devices - Detailed calculations
- ISO-15821 - Doorsets and windows - Water-tightness test under dynamic pressure - Cyclonic aspects
- ISO-15822 - Test method of doorset opening performance in diagonal deformation - Seismic aspects
- ISO-1804 - Doors -- Terminology
- ISO-19467 - Thermal performance of windows and doors - Determination of solar heat gain coefficient using solar simulator
- ISO-19467-2 - Thermal Performance of windows and doors - Determination of solar heat gain coefficient using solar simulator - Part 2: Centre of glazing
- ISO-22496 - Windows and pedestrian doors - Vocabulary
- ISO-2776 - Modular co-ordination -- Co-ordinating sizes for doorsets -- External and internal
- ISO-3008 - Fire-resistance tests - Door and shutter assemblies
- ISO-3008-1 - Fire resistance tests - Door and shutter assemblies - Part 1: General requirements
- ISO-3008-2 - Fire-resistance tests - Part 2: Lift landing door assemblies
- ISO-3008-3 - Fire resistance tests - Part 3: Door and shutter assemblies horizontally oriented
- ISO-3008-4 - Fire resistance tests - Door and shutter assemblies - Part 4: Linear joint fire seal materials used to seal the gap between a fire door frame and the supporting construction
- ISO-5925-1 - Fire tests - Smoke-control door and shutter assemblies - Part 1: Ambient- and medium-temperature leakage tests
- ISO-5925-1-AM1 - - Amendment 1
- ISO-5925-2 - Fire tests - Smoke-control door and shutter assemblies - Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy
- ISO-6442 - Door leaves - General and local flatness - Measurement method
- ISO-6443 - Door leaves - Method for measurement of height, width, thickness and squareness
- ISO-6444 - Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
- ISO-6445 - Doors - Behaviour between two different climates - Test method
- ISO-6612 - Windows and doors - Resistance to wind load - Test method
- ISO-6613 - Windows and doors - Air permeability - Test method
- ISO-8248 - Windows and door height windows -- Mechanical tests
- ISO-8269 - Doorsets -- Static loading test
- ISO-8270 - Windows and doors - Determination of the resistance to soft and heavy body impact for doors
- ISO-8271 - Door leaves - Determination of the resistance to hard body impact
- ISO-8272 - Doorsets -- Air permeability test
- ISO-8273 - Doors and doorsets -- Standard atmospheres for testing the performance of doors and doorsets placed between different climates
- ISO-8274 - Windows and doors - Resistance to repeated opening and closing - Test method
- ISO-8275 - Hinged or pivoted doors - Determination of the resistance to vertical load
- ISO-9379 - Operating forces - Test method - Doors
- ISO-9380 - Doorsets -- Repeated torsion test
- ISO-9381 - Hinged or pivoted doors - Determination of the resistance to static torsion
Other SDOs:
- BHMA-A156.1 - Butts and Hinges
- BHMA-A156.10 - Power Operated Pedestrian Doors
- BHMA-A156.11 - Cabinet Locks
- BHMA-A156.115 - American National Standard for Hardware Preparation in Steel Doors and Steel Frames
- BHMA-A156.115-W - American National Standard for Hardware Preparation in Wood Doors with Wood or Steel Frames
- BHMA-A156.12 - Interconnected Locks
- BHMA-A156.13 - Mortise Locks and Latches (Series 1000)
- BHMA-A156.14 - Sliding and Folding Door Hardware
- BHMA-A156.15 - American National Standard for Release Devices - Closer Holder, Electromagnetic and Electromechanical
- BHMA-A156.16 - Auxiliary Hardware
- BHMA-A156.17 - Self Closing Hinges and Pivots
- BHMA-A156.18 - American National Standard for Materials and Finishes
- BHMA-A156.19 - Power Assist and Low Energy Power Operated Doors
- BHMA-A156.2 - Bored and Preassembled Locks and Latches
- BHMA-A156.20 - American National Standard for Strap and Tee Hinges, and Hasps
- BHMA-A156.21 - Thresholds
- BHMA-A156.22 - Door Gasketing and Edge Seal Systems
- BHMA-A156.23 - Electromagnetic locks
- BHMA-A156.24 - American National Standard for Delayed Egress Locking Systems
- BHMA-A156.25 - Electrified Locking Devices
- BHMA-A156.26 - Continuous Hinges
- BHMA-A156.27 - Power And Manual Operated Revolving Pedestrian Doors
- BHMA-A156.28 - Recommended Practices for Mechanical Keying Systems
- BHMA-A156.29 - Exit Locks, Exit Alarms, Alarms for Exit Devices
- BHMA-A156.3 - Exit Devices
- BHMA-A156.32 - Integrated Door Opening Assemblies
- BHMA-A156.33 - STANDARD for INTERNALLY POWERED ARCHITECTURAL HARDWARE DEVICES
- BHMA-A156.34 - Bored Locks and Mortise Locks With Ligature Resistant Trim
- BHMA-A156.4 - Door Controls - Closers
- BHMA-A156.5 - Cylinders and input devices for locks
- BHMA-A156.6 - Architectural Door Trim
- BHMA-A156.7 - Template Hinge Dimensions
- BHMA-A156.8 - Door controls - Overhead Stops and Holders
- BHMA-A156.9 - Cabinet Hardware
- DIN-EN-12210 - Windows and doors - Resistance to wind load - Classification; German version EN 12210:2016
- DIN-EN-12217 - Doors - Operating forces - Requirements and classification; German version EN 12217:2015
- DIN-EN-12608 - Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods; German version EN 12608:2003
- DIN-EN-12635 - Industrial, Commercial & Garage Doors & Gates - Installation & Use
- DIN-EN-12978 - Industrial, Commercial & Garage Doors & Gates - Safety Devices for Power Operated Door
- DIN-EN-13120 - Internal blinds - Performance requirements including safety; German version EN 13120:2009+A1:2014
- DIN-EN-13123-2 - Part 2: Range Test, Windows, Doors & Shutters, Explosion Resistance - Requirements & C
- DIN-EN-13124-2 - Part 2: Range Test, Windows, Doors & Shutters, Explosion Resistance - Test Method
- DIN-EN-13330 - Shutters - Hard body impact and prevention of access - Test methods; German version EN 13330:2013
- DIN-EN-13561 - External blinds and awnings - Performance requirements including safety; German version EN 13561:2015
- DIN-EN-13659 - Shutters and external venetian blinds - Performance requirements including safety; German version EN 13659:2015
- DIN-EN-14024 - Metal Profiles With Thermal Barrier, Mechanical Performance - Requirements, Proof & T
- DIN-EN-14202 - Blinds & Shutters, Suitability for Use of Tubular & Square Motorizations, Requirements
- DIN-EN-14220 - Timber & Wood-Based Materials in External Windows, External Door Leaves & External Do
- DIN-EN-14221 - Timber & Wood-Based Materials in Internal Windows, Internal Door Leaves & Internal Do
- DIN-EN-14351-1 - Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets; German version EN 14351-1:2006+A2:2016
- DIN-EN-14501 - Blinds & Shutters - Thermal & Visual Comfort - Performance Characteristics & Classific
- DIN-EN-14600 - Doorsets & Openable Windows With Fire Resisting &/or Smoke Control Characteristics - R
- DIN-EN-14608 - Windows, Determination of the Resistance To Racking
- DIN-EN-14609 - Windows, Determination of the Resistance To Static Torsion
- DIN-EN-14759 - Shutters - Acoustic Insulation Relative To Airborne Sound, Expression of Performance
- DIN-EN-1634-3 - Part 3: Smoke Control Test for Door & Shutter Assemblies, Fire Resistance & Smoke Cont
- DIN-EN-ISO-12567-2 - Part 2: Roof Windows & Other Projecting Windows, Thermal Performance of Windows & Door
- EN-1026 - Windows and doors - Air permeability - Test method
- EN-1027 - Windows and doors - Water tightness - Test method
- EN-1191 - Windows and doors - Resistance to repeated opening and closing - Test method
- EN-12207 - Windows and doors - Air permeability - Classification
- EN-12208 - Windows & Doors - Watertightness - Classification
- EN-12210 - Windows and doors - Resistance to wind load - Classification
- EN-12211 - Windows and doors - Resistance to wind load - Test method
- EN-12216 - Shutters, external blinds, internal blinds - Terminology, glossary and definitions
- EN-12217 - Doors - Operating forces - Requirements and classification
- EN-12428 - Industrial, commercial and garage doors - Thermal transmittance - Requirements for the calculation
- EN-12608-1 - Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
- EN-12635 - Industrial, Commercial & Garage Doors & Gates - Installation & Use
- EN-12978 - Industrial, Commercial & Garage Doors & Gates - Safety Devices for Power Operated Door
- EN-13120 - Internal blinds - Performance requirements including safety
- EN-13330 - Shutters - Hard body impact and prevention of access - Test methods
- EN-13420 - Windows - Behaviour between different climates - Test method
- EN-13527 - Shutters & Blinds, Measurement of Operating Force - Test Methods
- EN-13561 - Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption
- EN-13659 - Shutters and external venetian blinds - Performance requirements including safety
- EN-14024 - Metal Profiles With Thermal Barrier, Mechanical Performance - Requirements, Proof & T
- EN-14202 - Blinds & Shutters, Suitability for Use of Tubular & Square Motorizations, Requirements
- EN-14220 - Timber & Wood-Based Materials in External Windows, External Door Leaves & External Do
- EN-14221 - Timber & Wood-Based Materials in Internal Windows, Internal Door Leaves & Internal Do
- EN-14351-1 - Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
- EN-14351-2 - Windows and doors - Product standard, performance characteristics - Part 2: Internal pedestrian doorsets
- EN-14500 - Blinds & Shutters, Thermal & Visual Comfort, Test & Calculation Methods
- EN-14501 - Blinds & Shutters - Thermal & Visual Comfort - Performance Characteristics & Classific
- EN-14600 - Doorsets & Openable Windows With Fire Resisting &/or Smoke Control Characteristics - R
- EN-14608 - Windows, Determination of the Resistance To Racking
- EN-14609 - Windows, Determination of the Resistance To Static Torsion
- EN-14637 - Building Hardware, Electrically Controlled Hold-Open Systems for Fire/Smoke Door Assem
- EN-14759 - Shutters - Acoustic Insulation Relative To Airborne Sound, Expression of Performance
- EN-15269-1 - Part 1: General Requirements, Extended Application of Test Results for Fire Resistance
- EN-15269-10 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies
- EN-15269-11 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 11: Fire resistance for operable fabric curtains
- EN-15269-2 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of hinged and pivoted steel doorsets
- EN-15269-3 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
- EN-15269-5 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows
- EN-15269-7 - Part 7: Fire Resistance for Steel Sliding Doorsets, Extended Application of Test Resul
- EN-16005 - Power operated pedestrian doorsets - Safety in use - Requirements and test methods
- EN-16034 - Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
- EN-1627 - Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification
- EN-1628 - Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
- EN-16281 - Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods
- EN-1629 - Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading
- EN-1630 - Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts
- EN-1634-1 - Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows
- EN-1634-2 - Fire Resistance & Smoke Control Tests for Door, Shutter & Openable Window Assemblies &
- EN-16361 - Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation
- EN-16433 - Internal blinds - Protection from strangulation hazards - Test methods
- EN-16434 - Internal blinds - Protection from strangulation hazards - Requirements and test methods for safety devices
- EN-16580 - Windows and doors - Wetness and splash water proof door leaves - Test and classification
- EN-16654 - Child protective products - Consumer fitted finger protection devices for doors - Safety requirements and test methods
- EN-1923 - External blinds and shutters - Resistance to wind loads - Method of testing and performance criteria
- EN-1932 - External blinds and shutters - Resistance to wind loads - Method of testing and performance criteria
- EN-60335-2-103 - Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows
- EN-60335-2-97 - Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
- EN-947 - Hinged or Pivoted Doors, Determination of the Resistance To Vertical Load
- EN-951 - Door Leaves, Method for Measurement of Height, Width, Thickness & Squareness
- EN-ISO-10077-1 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General
- EN-ISO-10077-2 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames
- EN-ISO-12567-1 - Part 1: Complete Windows & Doors, Thermal Performance of Windows & Doors - Determinati
- EN-ISO-12567-2 - Part 2: Roof Windows & Other Projecting Windows, Thermal Performance of Windows & Door
- JIS-A-1493 - Thermal performance of windows and doors -- Determination of solar heat gain coefficient using solar simulator
- JIS-A-1526 - Doors terminology
- JIS-A-1530 - Windows and doors -- Resistance to repeated opening and closing -- Test method
- JIS-A-4710 - Windows and doorsets -- Thermal resistance test
- SIS-CEN/TR-16676 - Energy losses by industrial door
- SS-24827 - Fire tests - Building products - Door and shutterassemblies
- SS-817302 - Wooden doorsets - Wood requirements
- SS-EN-1026 - Windows and doors - Air permeability - Test method
- SS-EN-1027 - Windows and doors - Water tightness - Test method
- SS-EN-1121 - Doors - Behaviour between two different climates - Test method
- SS-EN-1154 - Building hardware - Controlled door closing devices - Requirements and test methods
- SS-EN-1154-AM1 - Building hardware - Controlled door closing devices - Requirements and test methods
- SS-EN-1191 - Windows and doors - Resistance to repeated opening and closing - Test method
- SS-EN-1192 - Doors - Classification of strength requirements
- SS-EN-12045 - Shutters and blinds power operated - Safety in use - Measurement of transmitted force
- SS-EN-12046-1 - Operating forces - Test method - Part 1: Windows
- SS-EN-12046-2 - Operating forces - Test method - Part 2: Doors
- SS-EN-12194 - Shutters, external and internal blinds - Misuse - Test methods
- SS-EN-12207 - Windows and doors - Air permeability - Classification
- SS-EN-12208 - Windows and doors - Watertightness - Classification
- SS-EN-12210 - Windows and doors - Resistance to wind load - Classification
- SS-EN-12211 - Windows and doors - Resistance to wind load - Test method
- SS-EN-12216 - Shutters, external blinds, internal blinds - Terminology, glossary and definitions
- SS-EN-12217 - Doors - Operating forces - Requirements and classification
- SS-EN-12219 - Doors - Climatic influences - Requirements and classification
- SS-EN-12365-1 - Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification
- SS-EN-12365-2 - Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods
- SS-EN-12365-3 - Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method
- SS-EN-12365-4 - Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method
- SS-EN-12400 - Windows and pedestrian doors - Mechanical durability - Requirements and classification
- SS-EN-12412-2 - Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 2: Frames
- SS-EN-12412-4 - Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 4: Roller shutter boxes
- SS-EN-12424 - Industrial, commercial and garage doors and gates - Resistance to wind load - Classification
- SS-EN-12425 - Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification
- SS-EN-12426 - Industrial, commercial and garage doors and gates - Air permeability - Classification
- SS-EN-12427 - Industrial, commercial and garage doors and gates - Air permeability - Test method
- SS-EN-12428 - Industrial, commercial and garage doors - Thermal transmittance - Requirements for the calculation
- SS-EN-12433-1 - Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors
- SS-EN-12433-2 - Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors
- SS-EN-12444 - Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation
- SS-EN-12453 - Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods
- SS-EN-12489 - Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method
- SS-EN-12519 - Windows and pedestrian doors - Terminology
- SS-EN-12604 - Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test methods
- SS-EN-12605 - Industrial, commercial and garage doors and gates - Mechanical aspects - Test Methods
- SS-EN-12608 - Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods
- SS-EN-12608-1 - Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
- SS-EN-12608-1-AM1 - Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
- SS-EN-12635 - Industrial, commercial and garage doors and gates - Installation and use
- SS-EN-12833 - Skylight and conservatory roller shutters - Reistance to snow load - Test method
- SS-EN-12835 - Airtight shutters - Air permeability test
- SS-EN-12845 - Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance
- SS-EN-1294 - Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
- SS-EN-12978 - Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods
- SS-EN-13049 - Windows - Soft and heavy body impact - Test method, safety requirements and classification
- SS-EN-13115 - Windows - Classification of mechanical properties - Racking, torsion and operating forces
- SS-EN-13120 - Internal blinds - Performance requirements including safety
- SS-EN-13123-1 - Windows, doors and shutters - Explosion resistance - Requirements and classification - Part 1: Shock tube
- SS-EN-13123-2 - Windows, doors and shutters - Explosion resistance - Requirements and classification - Part 2: Range test
- SS-EN-13124-1 - Windows, doors and shutters - Explosion resistance - Test method - Part 1: Shock tube
- SS-EN-13124-2 - Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test
- SS-EN-13125 - Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product
- SS-EN-13330 - Shutters - Hard body impact and prevention of access - Test methods
- SS-EN-13420 - Windows - Behaviour between different climates - Test method
- SS-EN-13527 - Shutters and blinds - Measurement of operating force - Test methods
- SS-EN-13561 - External blinds and awnings - Performance requirements including safety
- SS-EN-13659 - Shutters and external venetian blinds - Performance requirements including safety
- SS-EN-14024 - Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
- SS-EN-14201 - Blinds and shutters - Resistance to repeated operations (mechanical endurance) - Methods of testing
- SS-EN-14202 - Blinds and shutters - Suitability for use of tubular and square motorizations - Requirements and test methods
- SS-EN-14203 - Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods
- SS-EN-14220 - Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications
- SS-EN-14221 - Timber and wood-framed materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications
- SS-EN-14351-1 - Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
- SS-EN-14351-2 - Windows and doors - Product standard, performance characteristics - Part 2: Internal pedestrian doorsets
- SS-EN-14500 - Blinds and shutters - Thermal and visual comfort - Test and calculation methods
- SS-EN-14501 - Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification
- SS-EN-14600 - Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification
- SS-EN-14608 - Windows - Determination of the resistance to racking
- SS-EN-14609 - Windows - Determination of the resistance to static torsion
- SS-EN-14637 - Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance
- SS-EN-14759 - Shutters - Acoustic insulation relative to airborne sound - Expression of performance
- SS-EN-1522 - Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification
- SS-EN-1523 - Windows, doors, shutters and blinds - Bullet resistance - Test methods
- SS-EN-15269-1 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements
- SS-EN-15269-10 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies
- SS-EN-15269-11 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 11: Fire resistance for operable fabric curtains
- SS-EN-15269-2 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of hinged and pivoted steel doorsets
- SS-EN-15269-20 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for doors, shutters, operable fabric curtains and openable windows
- SS-EN-15269-3 - Extended application of test results for fire resistance and/or smoke control for doorsets, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
- SS-EN-15269-5 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows
- SS-EN-15269-7 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for steel sliding doorsets
- SS-EN-1529 - Door leaves - Height, width, thickness and squareness - Tolerance classes
- SS-EN-1530 - Door leaves - General and local flatness - Tolerance classes
- SS-EN-16005 - Power operated pedestrian doorsets - Safety in use - Requirements and test methods
- SS-EN-16034 - Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
- SS-EN-16139 - Furniture - Strength, durability and safety - Requirements for non-domestic seating
- SS-EN-1627 - Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification
- SS-EN-1628 - Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
- SS-EN-16281 - Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods
- SS-EN-1629 - Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading
- SS-EN-1630 - Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts
- SS-EN-1634-1 - Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows
- SS-EN-1634-2 - Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware - Part 2: Fire resistance characterisation test for elements of building hardware
- SS-EN-1634-3 - Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 3: Smoke control test for door and shutter assemblies
- SS-EN-16361 - Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation
- SS-EN-16433 - Internal blinds - Protection from strangulation hazards - Test methods
- SS-EN-16434 - Internal blinds - Protection from strangulation hazards - Requirements and test methods for safety devices
- SS-EN-16580 - Windows and doors - Wetness and splash water proof door leaves - Test and classification
- SS-EN-16654 - Child protective products - Consumer fitted finger protection devices for doors - Safety requirements and test methods
- SS-EN-16759 - Bonded Glazing for doors, windows and curtain walling - Verification of mechanical performance of bonding on aluminium and steel surfaces
- SS-EN-16948 - Child protective products - Consumer fitted child resistant locking devices for cupboards and drawers - Safety requirements and test methods
- SS-EN-17020-1 - Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 1: Durability of self-closing of hinged and pivoted steel doorsets
- SS-EN-17020-2 - Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 2: Durability of self-closing of steel rolling shutters
- SS-EN-17020-3 - Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 3: Durability of self-closing of steel sliding doorsets
- SS-EN-17020-4 - Extended application of test results on durability of self-closing for doorsets and openable windows - Part 4: Durability of self-closing of fire resistance and/or smoke control hinged and pivoted metal framed glazed doorsets and openable windows
- SS-EN-17020-5 - Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 5: Durability of self-closing of hinged and pivoted timber doorsets
- SS-EN-17099 - Information technology - Fishery and aquaculture products - Requirements for labelling of distribution units and pallets in the trade of fishery and aquaculture products
- SS-EN-17213 - Windows and doors - Environmental Product Declarations - Product category rules for windows and pedestrian doorsets
- SS-EN-17372 - Power operated pedestrian swing door drives with self closing function - Requirements and test methods
- SS-EN-17410 - Plastics - Controlled loop recycling of PVC-U profiles from windows and doors
- SS-EN-1932 - External blinds and shutters - Resistance to wind loads - Method of testing and performance criteria
- SS-EN-1933 - Exterior blinds - Resistance to load due to water accumulation - Test method
- SS-EN-1998-1 - Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings
- SS-EN-3475-603 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking
- SS-EN-477 - Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to impact of profiles by falling mass
- SS-EN-478 - Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 °C
- SS-EN-479 - Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of heat reversion
- SS-EN-513 - Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to artificial weathering
- SS-EN-514 - Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of welded corners and T-joints
- SS-EN-947 - Hinged or pivoted doors - Determination of the resistance to vertical load
- SS-EN-949 - Determination of the resistance to soft and heavy body impact for doors
- SS-EN-950 - Door leaves - Determination of the resistance to hard body impact
- SS-EN-951 - Door leaves - Method for measurement of height, width, thickness and squareness
- SS-EN-952 - Door leaves - General and local flatness - Measurement method
- SS-EN-ISO-10077-1 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017)
- SS-EN-ISO-10077-2 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017)
- SS-EN-ISO-12567-1 - Thermal performance of windows and doors - Determination of thermal transmittance by hot-box method - Part 1: Complete windows and doors (ISO 12567-1:2010)
- SS-EN-ISO-12567-2 - Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows (ISO 12567-2:2005)
- SS-EN-ISO-19901-6 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations (ISO 19901-6:2009)
- SS-ENV-1627 - Windows, doors, shutters - Burglar resistance - Requirements and classification
- SS-ENV-1628 - Windows, door, shutters - Burglair resistance - Test method for determination of resistance under static loading
- SS-ENV-1629 - Windows, doors, shutters - Burglair resistance - Test method for determination of resistance under dynamic loading
- SS-ENV-1630 - Windows, doors, shutters - Burglair resistance - Test method for determination of resistance to manual burglary attempts
- SS-ISO-13226 - Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2018, IDT)
- SS-ISO-1804 - Doors - Terminology
- SS-ISO-3008 - Fire-resistance tests - Door and shutter assemblies (ISO 3008:2007, IDT)
- SS-ISO-4427-1 - Plastics piping systems for water supply and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General (ISO 4427-1:2019, IDT)
- SS-ISO-5925-1 - Fire tests - Smoke control door and shutter assemblies - Part 1: Ambient and medium temperature leakage test procedure (ISO 5925-1:2006, IDT)
- SS-ISO-8269 - Doorsets - Static loading test
- SS-ISO-8270 - Doorsets - Soft heavy body impact test
- SS-ISO-8271 - Door leaves - Hard body impact test
- SS-ISO-8272 - Doorsets - Air permeability test
- SS-ISO-8273 - Doors and doorsets - Standard atmospheres for testing the performance of doors and doorsets placed between different climates
- SS-ISO-8274 - Doorsets - Determination of closing force
- SS-ISO-8275 - Doorsets - Vertical load test
- UNE-CEN-16676 - Energy losses by industrial door
- UNE-EN-13561 - External blinds and awnings - Performance requirements including safety
- UNE-EN-1630 - Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts
- UNE-EN-16580 - Windows and doors - Wetness and splash water proof door leaves - Test and classification
- UNE-EN-16654 - Child protective products - Consumer fitted finger protection devices for doors - Safety requirements and test methods