15.05: Engine Coolants; Halogenated Organic Solvents and Fire Extinguishing Agents; Industrial and Specialty Chemicals
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-D1119 - Standard Test Method for Percent Ash Content of Engine Coolants
- ASTM-D1120 - Standard Test Method for Boiling Point of Engine Coolants
- ASTM-D1121 - Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
- ASTM-D1122 - Standard Test Method for Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
- ASTM-D1123 - Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
- ASTM-D1124 - Specification for Hydrometer-Thermometer Field Tester for Engine Coolants (Withdrawn 1993)
- ASTM-D1176 - Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
- ASTM-D1177 - Standard Test Method for Freezing Point of Aqueous Engine Coolants
- ASTM-D1287 - Standard Test Method for pH of Engine Coolants and Antirusts
- ASTM-D1384 - Standard Test Method for Corrosion Test for Engine Coolants in Glassware
- ASTM-D1881 - Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
- ASTM-D1882 - Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
- ASTM-D1901 - Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
- ASTM-D2106 - Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
- ASTM-D2108 - Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)
- ASTM-D2109 - Standard Test Methods for Nonvolatile Matter in Halogenated Organic
Solvents and Their Admixtures - ASTM-D2110 - Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures
- ASTM-D2111 - Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures
- ASTM-D2251 - Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures
- ASTM-D2570 - Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
- ASTM-D2758 - Standard Test Method for Engine Coolants by Engine Dynamometer (Withdrawn 2022)
- ASTM-D2809 - Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
- ASTM-D2847 - Standard Practice for Testing Engine Coolants in Car and Light Truck Service
- ASTM-D2942 - Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)
- ASTM-D2943 - Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability (Withdrawn 2017)
- ASTM-D2988 - Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
- ASTM-D2989 - Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and
Their Admixtures - ASTM-D3147 - Standard Test Method for Testing Stop-Leak Additives for Engine Coolants
- ASTM-D3306 - Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
- ASTM-D3316 - Standard Test Method for Stability of Perchloroethylene with Copper
- ASTM-D3321 - Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
- ASTM-D3401 - Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
- ASTM-D3443 - Standard Test Method for Chloride in Trichlorotrifluoroethane
- ASTM-D3444 - Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
- ASTM-D3447 - Standard Test Method for Purity of Halogenated Organic Solvents (Withdrawn 2004)
- ASTM-D3448 - Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
- ASTM-D3585 - Standard Specification for ASTM Reference Fluid for Coolant Tests
- ASTM-D3634 - Standard Test Method for Trace Chloride Ion in Engine Coolants
- ASTM-D3640 - Guidelines for Emission Control in Solvent Metal-Cleaning Systems (Withdrawn 1995)
- ASTM-D3698 - Standard Practice for Solvent Vapor Degreasing Operations
- ASTM-D3741 - Standard Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents
- ASTM-D3742 - Standard Test Method for 1,1,1-Trichloroethane Content (Withdrawn 2003)
- ASTM-D3844 - Standard Guide for Labeling Chlorinated Hydrocarbon Solvent Containers (Withdrawn 2013)
- ASTM-D3979 - Test Method for Particulate Matter In Trichlorotribluoroethane (Withdrawn 1993)
- ASTM-D4079 - Standard Specification for Vapor-Degreasing Grade Methylene Chloride
- ASTM-D4080 - Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
- ASTM-D4081 - Standard Specification for Drycleaning-Grade Perchloroethylene
- ASTM-D4126 - Standard Specification for Vapor-Degreasing Grade and General Solvent Grade
1,1,1-Trichloroethane (Withdrawn 2017) - ASTM-D4276 - Standard Practice for Confined Area Entry
- ASTM-D4340 - Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
- ASTM-D4376 - Standard Specification for Vapor-Degreasing Grade Perchloroethylene
- ASTM-D4494 - Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene
- ASTM-D4579 - Standard Practice for Handling an Acid Degreaser or Still
- ASTM-D4656 - Standard Specification for Prediluted Aqueous Ethylene Glycol Base Engine Coolant (50 Volume % Minimum) for Automobiles and Light-Duty Service (Withdrawn 2000)
- ASTM-D4701 - Standard Specification for Technical Grade Methylene Chloride
- ASTM-D4725 - Standard Terminology for Engine Coolants and Related Fluids
- ASTM-D4755 - Standard Test Method for Free Halogens in Halogenated Organic Solvents and Their Admixtures
- ASTM-D4757 - Standard Practice for Placarding Solvent Vapor Degreasers (Withdrawn 2004)
- ASTM-D4921 - Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
- ASTM-D4985 - Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
- ASTM-D4995 - Standard Specification for Electronic and Degreasing Grades of 1,1,2–Trichloro 1,2,2,–Trifluoroethane Solvent
- ASTM-D5216 - Standard Specification for Propylene Glycol Base Engine Coolant for Automobile and Light-Duty Service (Withdrawn 2000)
- ASTM-D5223 - Standard Specification for Engine Coolant Grade Propylene Glycol (Withdrawn 2003)
- ASTM-D5248 - Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
- ASTM-D5320 - Standard Test Methods for Determination of 1,1,1-Trichloroethane and Methylene Chloride Content in Stabilized Trichloroethylene and Tetrachloroethylene
- ASTM-D5345 - Standard Specification for Prediluted Aqueous Ethylene Glycol Base Low-Silicate Engine Coolant (50 Volume % Minimum) for Heavy-Duty Engines Requiring an Initial Charge of Supplemental Coolant Additive (SCA) (Withdrawn 2000)
- ASTM-D5394 - Standard Specification for Reclaimed 1,1,1-Trichloroethane (Withdrawn 2017)
- ASTM-D5395 - Standard Specification for Reclaimed Methylene Chloride
- ASTM-D5396 - Standard Specification for Reclaimed Perchloroethylene
- ASTM-D5616 - Standard Specification for Reclaimed Trichloroethylene
- ASTM-D5631 - Standard Practice for Handling, Transportation, and Storage of Halon 1301, Bromotrifluoromethane (CF
3 Br) - ASTM-D5632 - Standard Specification for Halon 1301, Bromotrifluoromethane (CF
3 Br) - ASTM-D5752 - Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
- ASTM-D5827 - Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
- ASTM-D5828 - Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
- ASTM-D5931 - Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
- ASTM-D5960 - Standard Specification for Technical Grade Ethylene Dichloride
- ASTM-D6064 - Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF
3 CHFCF3 ) - ASTM-D6065 - Standard Practice for Handling, Transportation, and Storage of HFC-227ea 1,1,1,2,3,3,3-Heptafluoropropane (CF
3 CHFCF3 ) - ASTM-D6107 - Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
- ASTM-D6126 - Standard Specification for HFC-23 (Trifluoromethane, CHF
3 ) - ASTM-D6127 - Standard Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF
3 ) - ASTM-D6129 - Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
- ASTM-D6130 - Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
- ASTM-D6208 - Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
- ASTM-D6210 - Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
- ASTM-D6211 - Standard Specification for Fully-Formulated Propylene-Glycol-Base Engine Coolant for Heavy-Duty Engines (Withdrawn 2003)
- ASTM-D6231 - Standard Specification for HFC-125 (Pentafluoroethane, C
2 HF5 ) - ASTM-D6257 - Standard Specification for Prediluted Aqueous Propylene Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service (Withdrawn 2000)
- ASTM-D6268 - Standard Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (C
2 HF5 ) - ASTM-D6361 - Standard Guide for Selecting Cleaning Agents and Processes
- ASTM-D6368 - Standard Specification for Vapor-Degreasing Solvents Based on
normal -Propyl Bromide and Technical Gradenormal -Propyl Bromide - ASTM-D6427 - Standard Practice for Handling, Transportation, and Storage of HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane (CF
3 CH2 CF3 ) - ASTM-D6471 - Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service (Withdrawn 2019)
- ASTM-D6472 - Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service (Withdrawn 2019)
- ASTM-D6505 - Standard Test Method for Assay of
normal -Propyl Bromide Content - ASTM-D6541 - Standard Specification for HFC-236fa, 1,1,1,3,3,3–Hexafluoropropane, (CF
3 CH2 CF3 ) - ASTM-D6660 - Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
- ASTM-D6806 - Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography
- ASTM-D7122 - Standard Specification for HCFC Blend B (CF
3 CCl2 H, Ar, and CF4 ) - ASTM-D7123 - Standard Practice for Handling, Transportation, and Storage of HCFC Blend B (CF
3 CCl2 H, Ar, and CF4 ) - ASTM-D7304 - Standard Test Method for Determination of Denatonium Benzoate in Engine Coolant by HPLC
- ASTM-D7323 - Standard Practice for Handling, Transportation, and Storage of IG-100 (Nitrogen)
- ASTM-D7324 - Standard Practice for Handling, Transportation, and Storage of IG-55 Ar N
2 - ASTM-D7325 - Standard Practice for Handling, Transportation, and Storage of IG-541 N
2 , Ar, CO2 - ASTM-D7326 - Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH
2 FCF3 , CHF2 CF3 , and CO2 ) - ASTM-D7327 - Standard Specification for HFC Blend B (CH
2 FCF3 , CHF2 CF3 , and CO2 ) - ASTM-D7388 - Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)
- ASTM-D7437 - Standard Test Method for Temperature and Hard Water Stability of Engine Coolants
- ASTM-D7509 - Standard Specification for Fluorocarbon Feedstock Grade Chloroform
- ASTM-D7515 - Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
- ASTM-D7517 - Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines
- ASTM-D7518 - Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service
- ASTM-D7583 - Standard Test Method for John Deere Coolant Cavitation Test
- ASTM-D7637 - Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
- ASTM-D7638 - Standard Test Method for Determination of Fatty Acids and Esters in Glycerin
- ASTM-D7640 - Standard Specification for Engine Coolant Grade Glycerin
- ASTM-D7673 - Standard Specification for Halon 1211, Bromochlorodifluoromethane (CF
2 BrCl) - ASTM-D7713 - Standard Specification for Aqueous Engine Coolant Grade Glycol (53 % by Volume Nominal)
- ASTM-D7714 - Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service
- ASTM-D7715 - Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines
- ASTM-D7716 - Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
- ASTM-D7736 - Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
- ASTM-D7815 - Standard Practice for Handling, Transportation, and Storage of Halon 1211, Bromochlorodifluoromethane (CF
2 BrCl) - ASTM-D7820 - Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel
- ASTM-D7821 - Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)
- ASTM-D7840 - Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware
- ASTM-D7896 - Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
- ASTM-D7933 - Standard Test Method for Engine Coolant Stagnation in Flux-Brazed Aluminum Heat Exchangers
- ASTM-D7934 - Standard Test Method for Corrosion of Cast Aluminum Alloys in Non-Aqueous Engine Coolants Under Heat-Rejecting Conditions (Withdrawn 2023)
- ASTM-D7935 - Standard Test Method for Corrosion Test for Non-Aqueous Engine Coolants in Glassware
- ASTM-D8034 - Standard Test Method for Simulated Service Corrosion Testing of Non-Aqueous Engine Coolants
- ASTM-D8039 - Standard Specification for Heat Transfer Fluids (HTF) for Heating and Air Conditioning (HVAC) Systems
- ASTM-D8040 - Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware
- ASTM-D8060 - Standard Specification for 2-Bromo-3,3,3-Trifluoro-1-Propene (CF
3 CBr=CH2 ) - ASTM-D8061 - Standard Practice for Handling, Transportation, and Storage of 2-Bromo-3,3,3-Trifluoro-1-Propene (CF
3 CBr=CH2 ) - ASTM-D8085 - Standard Specification for Non-Aqueous Engine Coolant for Automobile and Light-Duty Service
- ASTM-D8116 - Standard Specification for Fully-Formulated Non-Aqueous Engine Coolant for Heavy-Duty Engines (Withdrawn 2019)
- ASTM-D8485 - Standard Test Method for Corrosion Test for Electric Vehicle Coolants in Glassware
- ASTM-D8528 - Standard Test Method for Determination of Fluoride and Glycol Degradation Products in Engine Coolants by Ion Chromatography
- ASTM-D8565 - Standard Specification for Glycol-Based Coolants for Fuel Cell Electric Vehicles
- ASTM-D8566 - Standard Specification for Glycol-Based Electric Vehicle Coolant with Low Electrical Conductivity
- ASTM-D8567 - Standard Test Method for Analysis of Engine Coolant for Organic Additives by High Performance Liquid Chromatograph
- ASTM-D891 - Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
- ASTM-E1011 - Specification for Sulfuric Acid (Withdrawn 2001)
- ASTM-E1064 - Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
- ASTM-E1090 - Standard Test Method for Dicumyl Peroxide and Dicumyl Peroxide Decomposition Products in Resins (Withdrawn 2017)
- ASTM-E1098 - Specification for Liquid Caustic Soda (Sodium Hydroxide Solution) (Withdrawn 2001)
- ASTM-E1099 - Standard Specification for Soda Ash, Anhydrous (Sodium Carbonate, Anhydrous) (Withdrawn 2001)
- ASTM-E1100 - Test Method for Gas Chromatographic Analysis of Specially Denatured Ethanol, Formula SD-3A (Withdrawn 1998)
- ASTM-E1119 - Standard Specification for Industrial Grade Ethylene Glycol
- ASTM-E1120 - Standard Specification for Liquid Chlorine
- ASTM-E1146 - Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid)
- ASTM-E1177 - Standard Specification for Engine Coolant Grade Glycol
- ASTM-E1178 - Standard Test Methods for Analysis of Acrylonitrile (Withdrawn 2016)
- ASTM-E1228 - Standard Test Method for Assay of Peroxy Esters—Catalyzed Iodometric Procedure
- ASTM-E1229 - Standard Specification for Calcium Hypochlorite
- ASTM-E1230 - Test Method for the Approximate Determination of Low Molecular Weight Hydrocarbons in Anhydrous Hydrogen Fluoride (Withdrawn 2001)
- ASTM-E1456 - Standard Specification for Caustic Potash; Solid (Potassium Hydroxide; Solid) (Withdrawn 2017)
- ASTM-E1506 - Standard Test Methods for Analysis of Acid-Grade Calcium Fluoride (Fluorspar) (Withdrawn 2016)
- ASTM-E1547 - Standard Terminology Relating to Industrial and Specialty Chemicals
- ASTM-E1584 - Standard Test Method for Assay of Nitric Acid
- ASTM-E1615 - Standard Test Method for Determination of Trace Quantities of Iron by Visible Spectrophotometry
- ASTM-E1616 - Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography (Withdrawn 2017)
- ASTM-E1746 - Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
- ASTM-E1754 - Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
- ASTM-E1784 - Standard Test Method for Total Peroxides in Acrylonitrile (Withdrawn 2016)
- ASTM-E1785 - Specification for Acrylonitrile (Withdrawn 2001)
- ASTM-E1786 - Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
- ASTM-E1787 - Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
- ASTM-E1788 - Standard Test Method for Acidity in Acrylonitrile (Withdrawn 2022)
- ASTM-E180 - Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals (Withdrawn 2009)
- ASTM-E1863 - Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography
- ASTM-E1899 - Standard Test Method for Hydroxyl Groups Using Reaction with
p -Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide - ASTM-E200 - Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
- ASTM-E201 - Test Method for Calculation of Volume and Weight of Industrial Chemical Liquids (Withdrawn 2001)
- ASTM-E202 - Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
- ASTM-E203 - Standard Test Method for Water Using Volumetric Karl Fischer Titration
- ASTM-E2036 - Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
- ASTM-E2037 - Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
- ASTM-E2193 - Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
- ASTM-E222 - Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation
- ASTM-E223 - Standard Test Methods for Analysis of Sulfuric Acid
- ASTM-E224 - Standard Test Methods for Analysis of Hydrochloric Acid
- ASTM-E2313 - Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
- ASTM-E233 - Test Method for Assay of N-Butyllithium Solutions (Withdrawn 1996)
- ASTM-E234 - Standard Test Method for Total Bromine Number of Unsaturated Aliphatic Chemicals (Withdrawn 2008)
- ASTM-E2409 - Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol
(Gas Chromatographic Method) - ASTM-E2469 - Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography
- ASTM-E2470 - Standard Specification for Polyester Grade Ethylene Glycol
- ASTM-E256 - Standard Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition (Withdrawn 2018)
- ASTM-E257 - Standard Test Method for Sulfur in Organic Compounds by Sodium Peroxide Bomb Ignition
- ASTM-E258 - Standard Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method
- ASTM-E2664 - Standard Practice for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol
- ASTM-E2679 - Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by
Non-Aqueous Potentiometric Titration - ASTM-E2680 - Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)
- ASTM-E271 - Standard Test Methods for Analysis of Aqueous Hydrofluoric Acid (Withdrawn 2003)
- ASTM-E291 - Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
- ASTM-E298 - Standard Test Methods for Assay of Organic Peroxides
- ASTM-E299 - Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
- ASTM-E300 - Standard Practice for Sampling Industrial Chemicals
- ASTM-E301 - Standard Test Method for Total Acidity of Organic Acids (Withdrawn 2001)
- ASTM-E302 - Test Methods for Monobasic Organic Acids (Withdrawn 2001)
- ASTM-E324 - Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
- ASTM-E325 - Test Method for Silicon in Organic Compounds by Sodium Peroxide Bomb Ignition (Withdrawn 1996)
- ASTM-E326 - Test Method for Hydroxyl Groups by Phthalic Anhydride Esterification (Withdrawn 2001)
- ASTM-E335 - Standard Test Method for Hydroxyl Groups by Pyromellitic Dianhydride Esterification (Withdrawn 2003)
- ASTM-E346 - Standard Test Methods for Analysis of Methanol (Withdrawn 2017)
- ASTM-E347 - Standard Test Method for Ash in Polybasic Acids (Withdrawn 2003)
- ASTM-E357 - Standard Test Method for Phosphorus in Organic Compounds by Sodium Peroxide Bomb Ignition
- ASTM-E358 - Test Methods for Analysis of Phosphoric Acid (Withdrawn 2000)
- ASTM-E359 - Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
- ASTM-E394 - Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
- ASTM-E410 - Standard Test Method for Moisture and Residue in Liquid Chlorine
- ASTM-E411 - Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
- ASTM-E412 - Test Method for Assay of Liquid Chlorine (Zinc Amalgam Method) (Withdrawn 1996)
- ASTM-E441 - Test Method for Vinyl Unsaturation in Organic Compounds with Mercuric Acetate (Withdrawn 1996)
- ASTM-E442 - Test Method for Chlorine, Bromine, or Iodine in Organic Compounds by Oxygen Flask Combustion (Withdrawn 1997)
- ASTM-E443 - Test Method for Sulphur in Organic Compounds by Oxygen Flask Combustion (Withdrawn 1997)
- ASTM-E449 - Standard Test Methods for Analysis of Calcium Chloride
- ASTM-E475 - Standard Test Method for Assay of Di-
tert -Butyl Peroxide Using Gas Chromatography - ASTM-E506 - Standard Test Method for Mercury in Liquid Chlorine
- ASTM-E533 - Standard Test Method for Trace Amounts of Arsenic in Inorganic Industrial Chemicals (Withdrawn 2003)
- ASTM-E534 - Standard Test Methods for Chemical Analysis of Sodium Chloride
- ASTM-E538 - Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
- ASTM-E567 - Test Method for Tertiary Hydroxyl Groups with Hydrogen Bromide (Withdrawn 1996)
- ASTM-E611 - Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography (Withdrawn 2020)
- ASTM-E649 - Standard Test Method for Bromine in Chlorine
- ASTM-E70 - Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
- ASTM-E755 - Standard Test Method for Dicumyl Peroxide, Assay (Liquid Chromatography) (Withdrawn 2016)
- ASTM-E806 - Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)
- ASTM-E819 - Standard Test Method for Trace Amounts of Arsenic in Organic Industrial Chemicals (Withdrawn 2003)
- ASTM-E852 - Test Methods for C4-C13 Plasticizer Grade Alcohols (Withdrawn 2000)