Document Center List of Standards on Piping And Couplings
ICS Code 23.100.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A822 - Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
- ASTM-F2905 - Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications
- ASTM-F2968 - Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications
- ASTM-F3226 - Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems
BSI:
- BS-4983 - Specification for textile reinforced thermoplastics hydraulic hoses and hose assemblies
- BS-5327 - Specification. Swept elbow bends for fluid power applications
- BS-5380 - Specification for hydraulic port and stud coupling using 'O'-ring sealing and 'G' series fastening threads
- BS-7198-1 - Hydraulic fluid power quick-action couplings. Specification for dimensions and performance
- BS-778 - Specification for steel pipes and joints for hydraulic purposes
- BS-7796 - Specification for hydraulic fluid power. Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar). Type 1 metric series and type 11 inch series
- BS-7993 - Twin ferrule connectors and associated tubing for 316 stainless steel systems. Specification and test methods
- BS-EN-853 - Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification
- BS-EN-853-TC - Tracked Changes. Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification
- BS-EN-857 - Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification
- BS-EN-857-TC - Tracked Changes. Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification
- BS-EN-ISO-1179-1 - Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing
- BS-EN-ISO-1179-2 - Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing
- BS-EN-ISO-1179-2-TC - Tracked Changes. Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing
- BS-EN-ISO-1179-3 - Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing
- BS-EN-ISO-1179-4 - Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing
- BS-EN-ISO-19879 - Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
- BS-EN-ISO-19879-TC - Tracked Changes. Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
- BS-EN-ISO-3949 - Plastics hoses and hose assemblies. Textile-reinforced types for hydraulic applications. Specification
- BS-EN-ISO-3949-TC - Tracked Changes. Plastics hoses and hose assemblies. Textile-reinforced types for hydraulic applications. Specification
- BS-EN-ISO-6149-1-TC - Tracked Changes. Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing
- BS-EN-ISO-6149-4 - Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing
- BS-EN-ISO-6149-4-TC - Tracked Changes. Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing
- BS-EN-ISO-6803 - Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing
- BS-EN-ISO-6803-TC - Tracked Changes. Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing
- BS-EN-ISO-8434-1 - Metallic tube connections for fluid power and general use
- BS-EN-ISO-8434-4 - Metallic tube connections for fluid power and general use
- BS-ISO-11237-1 - Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification. Oil-based fluid applications
- BS-ISO-11237-2 - Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification. Water-based fluid applications
- BS-ISO-12151-1 - Connections for hydraulic fluid power and general use. Hose fittings
- BS-ISO-12151-3 - Connections for hydraulic fluid power and general use. Hose fittings
- BS-ISO-12151-3-TC - Tracked Changes. Connections for hydraulic fluid power and general use. Hose fittings
- BS-ISO-12151-4 - Connections for hydraulic fluid power and general use. Hose fittings
- BS-ISO-12151-5 - Connections for hydraulic fluid power and general use. Hose fittings
- BS-ISO-12151-6 - Connections for hydraulic fluid power and general use. Hose fittings
- BS-ISO-1436 - Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification
- BS-ISO-1436-2 - Rubber Hoses & Hose Assemblies, Wire-Braid-Reinforced Hydraulic Types, Specification,
- BS-ISO-14540 - Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
- BS-ISO-14541 - Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
- BS-ISO-14743 - Pneumatic fluid power. Push-in connectors for thermoplastic tubes
- BS-ISO-14743-TC - Tracked Changes. Pneumatic fluid power. Push-in connectors for thermoplastic tubes
- BS-ISO-15171-1 - Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes
- BS-ISO-15171-2 - Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes
- BS-ISO-16028 - Hydraulic fluid power. Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar). Specifications
- BS-ISO-16030 - Pneumatic fluid power. Connections. Ports and stud ends
- BS-ISO-23297 - Thermoplastic hoses and hose assemblies. Wire or synthetic yarn reinforced single-pressure types for hydraulic applications. Specification
- BS-ISO-23297-TC - Tracked Changes. Thermoplastic hoses and hose assemblies. Wire or synthetic yarn reinforced single-pressure types for hydraulic applications. Specification
- BS-ISO-23309 - Hydraulic fluid power systems. Assembled systems. Methods of cleaning lines by flushing
- BS-ISO-3862 - Rubber hoses and hose assemblies. Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids. Specification
- BS-ISO-4079 - Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification
- BS-ISO-4079-2 - Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification
- BS-ISO-4397 - Fluid power connectors and associated components. Nominal outside diameters of tubes and nominal hose sizes
- BS-ISO-4399 - Fluid power systems and components. Connectors and associated components. Nominal pressures
- BS-ISO-6149-1 - Connections for Fluid Power & General Use, Ports & Stud Ends With ISO 261 Threads & O-
- BS-ISO-6149-2 - Connections for Fluid Power & General Use, Ports & Stud Ends With ISO 261 Threads & O-
- BS-ISO-6149-4 - Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing. Dimensions, design, test methods and requirements for external and internal hex port plugs
- BS-ISO-6150 - Pneumatic fluid power. Cylindrical quick-action couplings for maximum working pressures of 1 MPa, 1,6 MPa, and 2,5 MPa (10 bar, 16 bar and 25 bar). Plug connecting dimensions, specifications, application guidelines and testing
- BS-ISO-6162-1 - Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws
- BS-ISO-6162-2 - Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws
- BS-ISO-6162-2-TC - Tracked Changes. Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws
- BS-ISO-6164 - Hydraulic fluid power. Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80
- BS-ISO-6605 - Hydraulic fluid power. Test methods for hoses and hose assemblies
- BS-ISO-6605-TC - Tracked Changes. Hydraulic fluid power. Test methods for hoses and hose assemblies
- BS-ISO-7241 - Hydraulic fluid power. Dimensions and requirements of quick-action couplings
- BS-ISO-7241-2 - Hydraulic fluid power. Quick-action couplings
- BS-ISO-8434-2 - Metallic tube connections for fluid power and general use
- BS-ISO-8434-3 - Metallic tube connections for fluid power and general use
- BS-ISO-8434-6 - Metallic tube connections for fluid power and general use
- BS-ISO-9974-4 - Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing
- BS-ISO-9974-4-TC - Tracked Changes. Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing
- PD-ISO-11672 - Connectors for fluid power and general use. Designation and nomenclature
- PD-ISO-11686 - Connectors for fluid power and general use. Assembly instructions for connectors with adjustable stud ends and O-ring sealing
- PD-ISO-18409 - Hydraulic fluid power. Hose and hose assemblies. Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
ISO:
- ISO-10763 - Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures
- ISO-11237 - Rubber hoses and hose assemblies - Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
- ISO-11237-1 - Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Part 1: Oil-based fluid applications
- ISO-11237-2 - Part 2: Water-Based Fluid Applications, Rubber Hoses and Hose Assemblies - Wire-Braid-R
- ISO-11340 - Rubber and rubber products - Hydraulic hose assemblies - External leakage classification for hydraulic systems
- ISO-11672 - Connectors for fluid power and general use - Designation and nomenclature
- ISO-11686 - Connectors for fluid power and general use - Assembly instructions for connectors with adjustable stud ends and O-ring sealing
- ISO-1179 - Pipe connections, threaded to ISO 228/1, for plain end steel and other metal tubes in industrial applications
- ISO-1179-1 - Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports
- ISO-1179-2 - Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
- ISO-1179-3 - Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
- ISO-1179-4 - Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
- ISO-11926-1 - Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 1: Ports with O-ring seal in truncated housing
- ISO-11926-2 - Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 2: Heavy-duty (S series) stud ends
- ISO-11926-3 - Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 3: Light-duty (L series) stud ends
- ISO-12151-1 - Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
- ISO-12151-1-AM1 - - Amendment 1
- ISO-12151-2 - Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
- ISO-12151-3 - Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
- ISO-12151-4 - Connections for hydraulic fluid power and general use - Hose fittings - Part 4: Hose fittings with ISO 6149 metric stud ends
- ISO-12151-5 - Connections for hydraulic fluid power and general use - Hose fittings - Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
- ISO-12151-6 - Connections for hydraulic fluid power and general use - Hose fittings - Part 6: Hose fittings with ISO 8434-6 60 degree cone ends
- ISO-1436 - Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
- ISO-1436-1 - Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types - Specification - Part 1: Oil-based fluid applications
- ISO-1436-2 - Part 2: Water-Based Fluid Applications, Rubber Hoses and Hose Assemblies - Wire-Braid-R
- ISO-14540 - Hydraulic fluid power - Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
- ISO-14541 - Hydraulic fluid power - Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
- ISO-14743 - Pneumatic fluid power - Push-in connectors for thermoplastic tubes
- ISO-15171-1 - Connections for fluid power and general use -- Hydraulic couplings for diagnostic purposes -- Part 1: Coupling not for connection under pressure
- ISO-15171-2 - Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 x 2 end for connection under pressure
- ISO-16028 - Hydraulic fluid power - Dimensions and requirements of quick-action couplings, flush-face type
- ISO-16028-1 - Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications - Amendment 1
- ISO-16030 - Pneumatic fluid power - Connections - Ports and stud ends
- ISO-16030-1 - Pneumatic fluid power - Connections - Ports and stud ends - Amendment 1
- ISO-18409 - Hydraulic fluid power - Hose and hose assemblies - Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
- ISO-19879 - Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
- ISO-23297 - Thermoplastic hoses and hose assemblies - Wire or synthetic yarn reinforced single-pressure types for hydraulic applications - Specification
- ISO-23309 - Hydraulic fluid power systems - Assembled systems - Methods of cleaning lines by flushing
- ISO-3862 - Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification
- ISO-3862-1 - Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types - Specification - Part 1: Oil-based fluid applications
- ISO-3862-2 - Part 2: Water-Based Fluid Applications, Rubber Hoses & Hose Assemblies - Rubber-Cover
- ISO-3949 - Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification
- ISO-4079 - Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - Specification
- ISO-4079-1 - Rubber hoses and hose assemblies - Textile-reinforced hydraulic types - Specification - Part 1: Oil-based fluid applications
- ISO-4079-2 - Part 2: Water-Based Fluid Applications, Rubber Hoses and Hose Assemblies - Textile-Rein
- ISO-4397 - Fluid power connectors and associated components - Nominal outside diameters of tubes and nominal hose sizes
- ISO-4399 - Fluid power systems and components - Connectors and associated components - Nominal pressures
- ISO-6149-1 - Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal
- ISO-6149-2 - Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
- ISO-6149-3 - Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
- ISO-6149-4 - Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
- ISO-6150 - Pneumatic fluid power - Cylindrical quick-action couplings for maximum working pressures of 1 MPa, 1,6 MPa, and 2,5 MPa (10 bar, 16 bar and 25 bar) - Plug connecting dimensions, specifications, application guidelines and testing
- ISO-6162-1 - Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
- ISO-6162-2 - Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
- ISO-6164 - Hydraulic fluid power - Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80
- ISO-6605 - Hydraulic fluid power - Test methods for hoses and hose assemblies
- ISO-7241 - Hydraulic fluid power - Dimensions and requirements of quick-action couplings
- ISO-7241-1 - Hydraulic fluid power - Quick-action couplings - Part 1 : Dimensions and requirements
- ISO-7241-2 - Hydraulic fluid power - Quick-action couplings - Part 2: Test methods
- ISO-8434-1 - Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors
- ISO-8434-2 - Metallic tube connections for fluid power and general use - Part 2: 37 degree flared connectors
- ISO-8434-3 - Metallic tube connections for fluid power and general use - Part 3: O-ring face seal connectors
- ISO-8434-4 - Metallic tube connections for fluid power and general use - Part 4: 24 degree cone connectors with O-ring weld-on nipples
- ISO-8434-5 - Metallic tube connections for fluid power and general use - Part 5: Test methods for threaded hydraulic fluid power connections
- ISO-8434-6 - Metallic tube connections for fluid power and general use - Part 6: 60 degree cone connectors with or without O-ring
- ISO-9974-1 - Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports
- ISO-9974-2 - Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E)
- ISO-9974-3 - Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B)
- ISO-9974-4 - Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
- ISO/DIS-11237 - Rubber Hoses and Hose Assemblies - Compact Wire-Braid-Reinforced Hydraulic Types for Oil
Other SDOs:
- DIN-EN-10305-6 - Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems; German version EN 10305-6:2016
- DIN-EN-ISO-6149-3 - Part 3: Dimensions, Design, Test Methods & Requirements for Light-Duty (l Series) Stu
- DIN-ISO-12151-3 - Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2010)
- DIN-ISO-16030 - Pneumatic Fluid Power - Connections - Ports & Stud Ends
- DIN-ISO-6162-1 - Part 1: Flange Connectors for Use at Pressures of 3,5 Mpa (35 Bar) To 35 Mpa (350 Bar)
- DIN-ISO-6162-2 - Part 2: Flange Connectors for Use at Pressures of 35 Mpa (350 Bar) To 40 Mpa (400 Bar)
- EN-853 - Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
- EN-854 - Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
- EN-856 - Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
- EN-857 - Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
- EN-ISO-1179-1 - Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
- EN-ISO-1179-2 - Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
- EN-ISO-1179-3 - Part 3: Light-Duty (l Series) Stud Ends With Sealing by O-Ring With Retaining Ring (Ty
- EN-ISO-1179-4 - Part 4: Stud Ends for General Use Only With Metal-To-Metal Sealing (Type B), Connectio
- EN-ISO-19879 - Metallic Tube Connections for Fluid Power & General Use - Test Methods for Hydraulic F
- EN-ISO-3949 - Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2009)
- EN-ISO-6149-1 - Part 1: Prts With Truncated Housing for O-Ring Seal, Connections for Hydraulic Fluid P
- EN-ISO-6149-2 - Part 2: Dimensions, Design, Test Methods & Requirements for Heavy-Duty (S Series) Stu
- EN-ISO-6149-3 - Part 3: Dimensions, Design, Test Methods & Requirements for Light-Duty (l Series) Stu
- EN-ISO-6149-4 - Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
- EN-ISO-6803 - Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
- EN-ISO-8434-1 - Part 1: 24 Degree Cone Connectors, Metallic Tube Connections for Fluid Power & General
- JIS-K-6349-1 - Part 1: Rubber Hoses & Hose Assemblies - Wire-Reinforced Hydraulic Type - Specification, W
- JIS-K-6349-2 - Part 2: Rubber Hoses & Hose Assemblies - Rubber-Covered, Spiral Wire Reinforced, Hydraulic
- JIS-K-6349-3 - Part 3: Wire Reinforced Rubber Hoses, Wire Reinforced Rubber Hoses for Hydraulic
- SIS-ISO/TR-17165-2 - Hydraulic fluid power - Hose assemblies - Part 2: Recommended practices for hydraulic hose assemblies
- SS-EN-12094-13 - Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves
- SS-EN-13286-2 - Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
- SS-EN-853 - Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
- SS-EN-854 - Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
- SS-EN-856 - Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
- SS-EN-857 - Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
- SS-EN-ISO-1179-1 - Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
- SS-EN-ISO-1179-2 - Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022)
- SS-EN-ISO-1179-3 - Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
- SS-EN-ISO-1179-4 - Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
- SS-EN-ISO-15496 - Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control (ISO 15496:2018)
- SS-EN-ISO-19879 - Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
- SS-EN-ISO-3949 - Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2020)
- SS-EN-ISO-6149-1 - Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2022)
- SS-EN-ISO-6149-2 - Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)
- SS-EN-ISO-6149-3 - Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
- SS-EN-ISO-6149-4 - Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017)
- SS-EN-ISO-6803 - Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017)
- SS-EN-ISO-8434-1 - Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors (ISO 8434-1:2018)
- SS-EN-ISO-8434-4 - Metallic tube connections for fluid power and general use - Part 4: 24o cone connectors with O-ring weld-on nipples (ISO 8434-4:1995)
- SS-EN-ISO-9974-1 - Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Treaded ports (ISO 9974-1:1996)
- SS-EN-ISO/IEC-29147 - Information technology - Security techniques - Vulnerability disclosure (ISO/IEC 29147:2018)
- SS-ISO-10763 - Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures (ISO 10763:2020, IDT)
- SS-ISO-11237 - Rubber hoses and hose assemblies - Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification (ISO 11237:2017, IDT)
- SS-ISO-11237-1 - Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Part 1: Oil-based fluid applications (ISO 11237-1:2004, IDT)
- SS-ISO-11237-2 - Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Part 2: Water-based fluid applications (ISO 11237-2:2006, IDT)
- SS-ISO-1179-1 - Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2007, IDT)
- SS-ISO-1179-2 - Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heay-duty (S series) and light-duty (L series) stud ends and elastomeric sealing (type E) (ISO 1179-2:2007, IDT)
- SS-ISO-1179-3 - Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007, IDT)
- SS-ISO-1179-4 - Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007, IDT)
- SS-ISO-12151-1 - Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends (ISO 12151-1:2010, IDT)
- SS-ISO-12151-1-AM1 - Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends - Amendment 1 (ISO 12151-1:2010/Amd 1:2017, IDT)
- SS-ISO-12151-2 - Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-3 24° cone connector ends with O-rings
- SS-ISO-12151-3 - Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2011, IDT)
- SS-ISO-12151-4 - Connections for hydraulic fluid power and general use - Hose fittings - Part 4: Hose fittings with ISO 6149 metric stud ends (ISO 12151-4:2007, IDT)
- SS-ISO-12151-5 - Connections for hydraulic fluid power and general use - Hose fittings - Part 5: Hose fittings with ISO 8434-2 37 degree flared ends (ISO 12151-5:2007, IDT)
- SS-ISO-12151-6 - Connections for hydraulic fluid power and general use - Hose fittings - Part 6: Hose fittings with ISO 8434-6 60 degree cone ends (ISO 12151-6:2009, IDT)
- SS-ISO-1436 - Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification (ISO 1436:2020, IDT)
- SS-ISO-1436-1 - Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types - Specification - Part 1: Oil-based fluid applications
- SS-ISO-1436-2 - Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types - Specification - Part 2: Water-based fluid applications (ISO 1436-2:2005, IDT)
- SS-ISO-14743 - Pneumatic fluid power - Push-in connectors for thermoplastic tubes (ISO 14743:2020, IDT)
- SS-ISO-15171-1 - Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure
- SS-ISO-15171-2 - Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 x 2 end for connection under pressure (ISO 15171-2:2016, IDT)
- SS-ISO-16030 - Pneumatic fluid power - Connections - Ports and stud ends
- SS-ISO-18869 - Hydraulic fluid power - Test methods for couplings actuated with or without tools (ISO 18869:2017, IDT)
- SS-ISO-23297 - Thermoplastics hoses and hose assemblies - Wire or synthetic yarn reinforced single-pressure types for hydraulic applications - Specification (ISO 23297:2008, IDT)
- SS-ISO-3387 - Rubber - Determination of crystallization effects by hardness measurements (ISO 3387:2020, IDT)
- SS-ISO-3862 - Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification (ISO 3862:2020, IDT)
- SS-ISO-3862-1 - Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types - Specification - Part 1: Oil-based fluid applications
- SS-ISO-3862-2 - Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types - Specification - Part 2: Water-based fluid applications (ISO 3862-2:2005, IDT)
- SS-ISO-3949 - Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2009, IDT)
- SS-ISO-4079 - Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - Specification (ISO 4079:2020, IDT)
- SS-ISO-4079-1 - Rubber hoses and hose assemblies - Textile-reinforced hydraulic types - Specification - Part 1: Oil-based fluid applications
- SS-ISO-4079-2 - Rubber hoses and hose assemblies - Textile-reinforced hydraulic types - Specification - Part 2: Water-based fluid applications (ISO 4079-2:2005, IDT)
- SS-ISO-4397 - Fluid power connectors and associated components - Nominal outside diameters of tubes and nominal hose sizes (ISO 4397:2011, IDT)
- SS-ISO-4399 - Fluid power systems and components - Connectors and associated components - Nominal pressures (ISO 4399:2019, IDT)
- SS-ISO-6149-1 - Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2006, IDT)
- SS-ISO-6149-2 - Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006, IDT)
- SS-ISO-6149-3 - Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006, IDT)
- SS-ISO-6149-4 - Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2006, IDT)
- SS-ISO-6150 - Pneumatic fluid power - Cylindrical quick-action couplings for maximum working pressures of 1 MPa, 1,6 MPa, and 2,5 MPa (10 bar, 16 bar and 25 bar) - Plug connecting dimensions, specifications, application guidelines and testing (ISO 6150:2018, IDT)
- SS-ISO-6162 - Hydraulic fluid power - Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) - Type I metric series and type II inch series
- SS-ISO-6162-1 - Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2012, IDT)
- SS-ISO-6162-2 - Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 (ISO 6162-2:2018, IDT)
- SS-ISO-6164 - Hydraulic fluid power - Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80 (ISO 6164:2018, IDT)
- SS-ISO-6605 - Hydraulic fluid power - Test methods for hoses and hose assemblies (ISO 6605:2017, IDT)
- SS-ISO-7241 - Hydraulic fluid power - Dimensions and requirements of quick-action couplings (ISO 7241:2014, IDT)
- SS-ISO-7241-2 - Hydraulic fluid power - Quick-action couplings - Part 2: Test methods
- SS-ISO-9974-4 - Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 9974-4:2016, IDT)
- UNE-EN-853 - Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
- UNE-EN-854 - Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
- UNE-EN-ISO-3949 - Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification