Document Center List of Standards on Telecontrol. Telemetering Including Supervising, Control And Data Acquisition System (Scada)
ICS Code 33.200
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
BSI:
- BS-7647 - Specification for radio teleswitches for tariff and load control
- BS-EN-13757-1 - Communication systems for meters
- BS-EN-13757-1-TC - Tracked Changes. Communication systems for meters
- BS-EN-13757-2 - Communication systems for meters
- BS-EN-13757-2-TC - Tracked Changes. Communication systems for meters
- BS-EN-13757-3 - Communication systems for meters
- BS-EN-13757-4 - Communication systems for meters
- BS-EN-13757-5 - Communication systems for meters
- BS-EN-13757-6 - Communication systems for meters
- BS-EN-13757-7 - Communication systems for meters
- BS-EN-16836-1 - Communication systems for meters. Wireless mesh networking for meter data exchange
- BS-EN-16836-2 - Communication systems for meters. Wireless mesh networking for meter data exchange
- BS-EN-16836-3 - Communication systems for meters. Wireless mesh networking for meter data exchange
- BS-EN-50239 - Railway applications. Radio remote control system of traction vehicle for shunting application
- BS-EN-50239-TC - Tracked Changes. Railway applications. Radio remote control system of traction vehicle for shunting application
- BS-EN-50710 - Requirements for the provision of secure remote services for fire safety systems and security systems
- BS-EN-60317-0-7 - Specifications for particular types of winding wires
- BS-EN-60864-2 - Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment. Interface standards for systems using data bus type interconnections
- BS-EN-60870-5-101 - Telecontrol equipment and systems
- BS-EN-60870-5-104 - Telecontrol equipment and systems
- BS-EN-60870-5-6 - Marine energy. Wave, tidal and other water current converters
- BS-EN-60870-6-501 - Telecontrol equipment and systems
- BS-EN-60870-6-503 - Telecontrol equipment and systems
- BS-EN-60870-6-702 - Telecontrol equipment and systems
- BS-EN-60870-6-802 - Telecontrol equipment and systems
- BS-EN-61850-10 - Communication networks and systems for power utility automation
- BS-EN-61850-5 - Communication networks and systems for power utility automation
- BS-EN-61850-7-1 - Communication networks and systems for power utility automation
- BS-EN-61850-7-2 - Communication networks and systems for power utility automation
- BS-EN-61850-7-3 - Communication networks and systems for power utility automation
- BS-EN-61850-7-4 - Communication networks and systems for power utility automation
- BS-EN-61850-7-410 - Communication networks and systems for power utility automation
- BS-EN-61850-7-420 - Communication networks and systems for power utility automation
- BS-EN-61850-8-1 - Communication networks and systems for power utility automation
- BS-EN-61850-9-1 - Communication networks and systems in substations. Specific communication service mapping (SCSM)
- BS-EN-61850-9-2 - Communication networks and systems for power utility automation
- BS-EN-61968-1 - Application integration at electric utilities. System interfaces for distribution management
- BS-EN-61968-100 - Application integration at electric utilities. System interfaces for distribution management
- BS-EN-61968-11 - Application integration at electric utilities. System interfaces for distribution management
- BS-EN-61968-13 - Application integration at electric utilities. System interfaces for distribution management
- BS-EN-61968-4 - Application integration at electric utilities. System interfaces for distribution management
- BS-EN-61968-8 - Application integration at electric utilities. System interfaces for distribution management
- BS-EN-61968-9 - Application integration at electric utilities. System interfaces for distribution management
- BS-EN-61970-1 - Energy management system application program interface (EMS-API)
- BS-EN-61970-301 - BS EN 61970-301 Ed 6.0 Energy management system application program interface (EMS-API). Part 301: Common Information Model (CIM) Base
- BS-EN-61970-402 - Energy management system application program interface (EMS-API)
- BS-EN-61970-403 - Energy management system application program interface (EMS-API)
- BS-EN-61970-404 - Energy management system application program interface (EMS-API)
- BS-EN-61970-405 - Energy management system application program interface (EMS-API)
- BS-EN-61970-407 - Energy management system application program interface (EMS-API)
- BS-EN-61970-452 - Energy management system application program interface (EMS-API)
- BS-EN-61970-453 - Energy management system application program interface (EMS-API)
- BS-EN-61970-453-TC - Energy management system application program interface (EMS-API)
- BS-EN-61970-456 - Energy management system application program interface (EMS-API)
- BS-EN-61970-501 - Energy management system application program interface (EMS-API)
- BS-EN-61970-552 - Energy management system application program interface (EMS-API)
- BS-EN-61970-552-TC - Tracked Changes. Energy management system application program interface (EMS-API)
- BS-EN-62008 - Performance characteristics and caliberation for digital data acquisition systems and relevant software
- BS-EN-62026-7 - Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs)
- BS-EN-62325-2 - Framework for energy market communications
- BS-EN-62325-301 - Framework for energy market communications
- BS-EN-62325-351 - Framework for energy market communications
- BS-EN-62325-450 - Framework for energy market communications
- BS-EN-62325-451-1 - Framework for energy market communications
- BS-EN-62325-451-2 - Framework for energy market communications
- BS-EN-62325-451-3 - Framework for energy market communications
- BS-EN-62325-451-4 - Framework for energy market communications
- BS-EN-62325-451-5 - Framework for energy market communications
- BS-EN-62325-451-6 - Framework for energy market communications
- BS-EN-62351-11 - Power systems management and associated information exchange. Data and communications security
- BS-EN-62351-3 - Power systems management and associated information exchange. Data and communications security
- BS-EN-62351-7 - Power systems management and associated information exchange. Data and communications security
- BS-EN-62351-9 - Power systems management and associated information exchange. Data and communications security
- BS-EN-62361-100 - Power systems management and associated information exchange. Interoperability in the long term
- BS-EN-62361-2 - Power systems management and associated information exchange. Interoperability in the long term
- BS-EN-62488-2 - Power line communication systems for power utility applications
- BS-EN-IEC-61753-1 - Fibre optic interconnecting devices and passive components. Performance standard
- BS-EN-IEC-61850-7-420 - Communication networks and systems for power utility automation
- BS-EN-IEC-61850-8-2 - Communication networks and systems for power utility automation
- BS-EN-IEC-61968-1 - Application integration at electric utilities. System interfaces for distribution management
- BS-EN-IEC-61968-100 - Application integration at electric utilities. System interfaces for distribution management
- BS-EN-IEC-61968-13 - Application integration at electric utilities. System interfaces for distribution management
- BS-EN-IEC-61968-3 - Application integration at electric utilities. System interfaces for distribution management
- BS-EN-IEC-61968-3-TC - Tracked Changes. Application integration at electric utilities. System interfaces for distribution management
- BS-EN-IEC-61968-4 - Application integration at electric utilities. System interfaces for distribution management
- BS-EN-IEC-61970-301 - Energy management system application program interface (EMS-API)
- BS-EN-IEC-61970-401 - Energy management system application program interface (EMS-API)
- BS-EN-IEC-61970-456 - Energy management system application program interface (EMS-API)
- BS-EN-IEC-61970-456-TC - Tracked Changes. Energy management system application program interface (EMS-API)
- BS-EN-IEC-61970-600-1 - Energy management system application program interface (EMS-API)
- BS-EN-IEC-61970-600-2 - Energy management system application program interface (EMS-API)
- BS-EN-IEC-62325-301-TC - Tracked Changes. Framework for energy market communications
- BS-EN-IEC-62325-451-10 - Framework for energy market communications
- BS-EN-IEC-62325-451-6 - Framework for energy market communications
- BS-EN-IEC-62325-451-7 - Framework for energy market communications
- BS-EN-IEC-62325-451-8 - Framework for energy market communications
- BS-EN-IEC-62325-503 - Framework for energy market communications
- BS-EN-IEC-62351-3 - Power systems management and associated information exchange. Data and communications security
- BS-EN-IEC-62351-3-TC - Tracked Changes. Power systems management and associated information exchange. Data and communications security
- BS-EN-IEC-62351-4 - Power systems management and associated information exchange. Data and communications security
- BS-EN-IEC-62351-5 - Power systems management and associated information exchange. Data and communications security
- BS-EN-IEC-62351-5-TC - Tracked Changes. Power systems management and associated information exchange. Data and communications security
- BS-EN-IEC-62351-6 - Power systems management and associated information exchange. Data and communications security
- BS-EN-IEC-62351-8 - Power systems management and associated information exchange. Data and communications security
- BS-EN-IEC-62351-9 - Power systems management and associated information exchange. Data and communications security
- BS-EN-IEC-62746-10-3 - Systems interface between customer energy management system and the power management system
- BS-IEC-60864-1 - Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment
- BS-IEC-60870-5-6 - Telecontrol Equipment & Systems, Guidelines for Conformance Testing for the IEC-60870
- BS-IEC-61334-5-2 - Distribution automation using distribution line carrier systems. Lower layer profiles
- BS-IEC-62325-451-4 - Framework for energy market communications. Settlement and reconciliation business process, contextual and assembly models for European market
- BS-IEC-62746-10-1 - Systems interface between customer energy management system and the power management system
- BS-IEC-62843 - Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment
- BS-IEC-SRD-62913-2-1 - Generic smart grid requirements
- BS-IEC-SRD-62913-2-2 - Generic smart grid requirements
- BS-IEC-SRD-62913-2-3 - Generic smart grid requirements
- BS-IEC-SRD-62913-2-4 - Generic smart grid requirements
- DD-CLC-61850-80-1 - Communication networks and systems for power utility automation
- DD-CLC-61970-2 - Energy management system application program interface (EMS-API)
- DD-IEC-60870-5-601 - Telecontrol equipment and systems
- DD-IEC-60870-5-604 - Telecontrol equipment and systems
- DD-IEC-60870-6-602 - Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendations. TASE transport profiles
- DD-IEC-61334-5-3 - Distribution automation using distribution line carrier systems. Lower layer profiles. Spread spectrum adaptive wideband (SS-AW) profile
- DD-IEC-61334-5-4 - Distribution automation using distribution line carrier systems. Lower layer profiles. Multi-carrier modulation (MCM) profile
- DD-IEC-61334-5-5 - Distribution automation using distribution line carrier systems. Lower layer profiles. Spread spectrum-fast frequency hopping (SS-FFH) profile
- DD-IEC-61850-2 - Communication networks and systems in substations. Glossary
- DD-IEC-61850-80-1 - Communication networks and systems for power utility automation. Guideline to exchanging information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104
- DD-IEC-61968-2 - Application integration at electric utilities. System interfaces for distribution management
- DD-IEC-62325-502 - Framework for energy market communications
- DD-IEC-62351-1 - Power systems management and associated information exchange. Data and communications security
- DD-IEC-62351-2 - Power systems management and associated information exchange. Data and communications security
- DD-IEC-62351-3 - Power systems management and associated information exchange. Data and communications security
- DD-IEC-62351-4 - Power systems management and associated information exchange. Data and communications security
- DD-IEC-62351-5 - Power systems management and associated information exchange. Data and communications security. Security for IEC 60870-5 and derivatives
- DD-IEC-62351-6 - Power systems management and associated information exchange. Data and communication security
- DD-IEC-62351-7 - Power systems management and associated information exchange. Data and communication security
- DD-IEC-62351-8 - Power systems management and associated information exchange. Data and communications security
- DD-IEC/PAS-62026-7 - Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs). CompoNet
- PD-CEN-17167 - Communication system for meters. Accompanying TR to EN 13757-2,-3 and -7, Examples and supplementary information
- PD-CEN-17167-TC - Tracked Changes. Communication system for meters. Accompanying TR to EN 13757-2,-3 and -7, Examples and supplementary information
- PD-CEN/CLC-ETSI50572 - Functional reference architecture for communications in smart metering systems
- PD-CLC-50452 - Railway applications. Radio remote control system of traction vehicle for freight traffic in multiple traction operation
- PD-CLC-50586 - Open Smart Grid Protocol (OSGP)
- PD-IEC-60870-1-5 - Telecontrol equipment and systems. General considerations
- PD-IEC-60870-5-601 - Telecontrol equipment and systems
- PD-IEC-60870-5-604 - Telecontrol equipment and systems
- PD-IEC-60870-5-7 - Telecontrol equipment and systems
- PD-IEC-60870-6-504 - Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendations
- PD-IEC-60870-6-505 - Telecontrol equipment and systems
- PD-IEC-61491 - Electrical equipment of industrial machines. Serial data link for real-time communication between controls and drives
- PD-IEC-61850-1 - Communication networks and systems for power utility automation
- PD-IEC-61850-10-3 - Communication networks and systems for power utility automation
- PD-IEC-61850-1-2 - Communication networks and systems for power utility automation
- PD-IEC-61850-2 - Communication networks and systems for power utility automation
- PD-IEC-61850-7-500 - Communication networks and systems for power utility automation
- PD-IEC-61850-7-510 - Communication networks and systems for power utility automation
- PD-IEC-61850-7-510-TC - Tracked Changes. Communication networks and systems for power utility automation
- PD-IEC-61850-7-6 - Communication networks and systems for power utility automation
- PD-IEC-61850-7-7 - Communication networks and systems for power utility automation
- PD-IEC-61850-80-1 - Communication networks and systems for power utility automation
- PD-IEC-61850-80-3 - Communication networks and systems for power utility automation
- PD-IEC-61850-80-4 - Communication networks and systems for power utility automation
- PD-IEC-61850-80-5 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-1 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-10 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-11 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-12 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-13 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-14 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-16 - Communication networks and systems in power utility automations
- PD-IEC-61850-90-17 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-2 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-27 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-3 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-4 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-5 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-6 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-7 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-7-TC - Tracked Changes. Communication networks and systems for power utility automation
- PD-IEC-61850-90-8 - Communication networks and systems for power utility automation
- PD-IEC-61850-90-9 - Communication networks and systems for power utility automation
- PD-IEC-61968-14 - Application integration at electric utilities. System interfaces for distribution management
- PD-IEC-61968-900 - Application integration at electric utilities. System interfaces for distribution management
- PD-IEC-61970-600-1 - Energy management system application program interface (EMS-API)
- PD-IEC-61970-600-2 - Energy management system application program interface (EMS-API)
- PD-IEC-62325-101 - Framework for energy market communications
- PD-IEC-62325-102 - Framework for energy market communications
- PD-IEC-62325-103 - Framework for energy market communications
- PD-IEC-62325-501 - Framework for energy market communications
- PD-IEC-62325-503 - Framework for energy market communications
- PD-IEC-62351-10 - Power systems management and associated information exchange. Data and communications security
- PD-IEC-62351-100-1 - Power systems management and associated information exchange. Data and communications security
- PD-IEC-62351-100-3 - Power systems management and associated information exchange. Data and communications security
- PD-IEC-62351-100-4 - Power systems management and associated information exchange. Data and communication security
- PD-IEC-62351-100-6 - Power systems management and associated information exchange. Data and communication security
- PD-IEC-62351-12 - Power systems management and associated information exchange. Data and communications security
- PD-IEC-62351-13 - Power systems management and associated information exchange. Data and communications security
- PD-IEC-62351-5 - Power systems management and associated information exchange. Data and communications security
- PD-IEC-62351-90-1 - Power systems management and associated information exchange. Data and communications security
- PD-IEC-62351-90-2 - Power systems management and associated information exchange. Data and communications security
- PD-IEC-62351-90-3 - Power systems management and associated information exchange. Data and communications security
- PD-IEC-62357-1 - Power systems management and associated information exchange
- PD-IEC-62357-2 - Power systems management and associated information exchange
- PD-IEC-62357-200 - Power systems management and associated information exchange
- PD-IEC-62361-102 - Power systems management and associated information exchange. Interoperability in the long term
- PD-IEC-62361-103 - Power systems management and associated information exchange. Interoperability in the long term
- PD-IEC-62746-2 - Systems interface between customer energy management system and the power management system
- PD-IEC-62746-3 - Systems interface between customer energy management system and the power management system
- PD-IEC-62939-1 - Smart grid user interface
- PD-IEC-63191 - Demand-side power quality management
- PD-IEC-63191-TC - Tracked Changes. Demand-side power quality management
- PD-IEC-63266 - Representation of communication in power utility automation
- PD-IEC/PAS-61850-9-3 - Communication networks and systems for power utility automation
- PD-IEC/PAS-62746-101 - Systems interface between customer energy management system and the power management system
- PD-IEC/PAS62746-10-1 - Systems interface between customer energy management system and the power management system
- PD-R009-005 - Railway applications. Radio remote control system of traction vehicle for freight traffic in multiple traction operation
IEC:
- IEC-381-2 - Analogue signals for process control systems. Part 2: Direct voltage signals
- IEC-60353-1 - Amendment 1
- IEC-60864-2 - Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment - Part 2: Interface standards for systems using data bus type interconnections
- IEC-60870-1-5 - Telecontrol equipment and systems - Part 1-5: General considerations - Influence of modem transmission procedures with scramblers on the data integrity of transmission systems using the protocol IEC 60870-5
- IEC-60870-5-101 - Telecontrol equipment and systems - Part 5-101: Transmission protocols - Companion standard for basic telecontrol tasks
- IEC-60870-5-101-AM 1 - Amendment 1 - Telecontrol equipment and systems - Part 5-101: Transmission protocols - Companion standard for basic telecontrol tasks
- IEC-60870-5-103 - Telecontrol equipment and systems - Part 5-103: Transmission protocols - Companion standard for the informative interface of protection equipment
- IEC-60870-5-104 - Telecontrol equipment and systems - Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles
- IEC-60870-5-104-AM1 - Amendment 1 - Telecontrol equipment and systems - Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles
- IEC-60870-5-6 - Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards
- IEC-60870-5-601 - Telecontrol equipment and systems - Part 5-601: Transmission protocols - Conformance test cases for the IEC 60870-5-101 companion standard
- IEC-60870-5-604 - Telecontrol equipment and systems - Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard
- IEC-60870-5-604-RL - Telecontrol equipment and systems - Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard
- IEC-60870-5-7 - Telecontrol equipment and systems - Part 5-7: Transmission protocols - Security extensions to IEC 60870-5-101 and IEC 60870-5-104 protocols (applying IEC 62351)
- IEC-60870-5-SERIES - Telecontrol equipment and systems - Part 5: Transmission protocols - ALL PARTS
- IEC-60870-6-503 - Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and protocol
- IEC-60870-6-504 - Telecontrol equipment and systems - Part 6-504: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.1 User conventions
- IEC-60870-6-505 - Telecontrol equipment and systems - Part 6-505: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 User guide
- IEC-60870-6-505-1 - Amendment 1 - Telecontrol equipment and systems - Part 6-505: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Tase.2 User guide
- IEC-60870-6-602 - Telecontrol equipment and systems - Part 6-602: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE transport profiles
- IEC-60870-6-701 - Telecontrol equipment and systems - Part 6-701: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.1 application service in end systems
- IEC-60870-6-702 - Telecontrol equipment and systems - Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.2 application service in end systems
- IEC-60870-6-802 - Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models
- IEC-60870-6-802-1 - Amendment 1 - Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models
- IEC-61037 - Electricity Metering - Tariff & Load Control - Particular Requirements for Electronic Ripp
- IEC-61038 - Electricity Metering - Tariff & Load Control - Particular Requirements for Time Switches
- IEC-61334-1-2 - Distribution automation using distribution line carrier systems - Part 1-2: General considerations - Guide for specification
- IEC-61334-3-1 - Distribution automation using distribution line carrier systems - Part 3-1: Mains signalling requirements - Frequency bands and output levels
- IEC-61334-3-22 - Distribution automation using distribution line carrier systems - Part 3-22: Mains signalling requirements - MV phase-to-earth and screen-to-earth intrusive coupling devices
- IEC-61334-4-33 - Distribution automation using distribution line carrier systems - Part 4-33: Data communication protocols - Data link layer - Connection oriented protocol
- IEC-61334-4-511 - Distribution automation using distribution line carrier systems - Part 4-511: Data communication protocols - Systems management - CIASE protocol
- IEC-61334-4-512 - Distribution automation using distribution line carrier systems - Part 4-512: Data communication protocols - System management using profile 61334-5-1 - Management Information Base (MIB)
- IEC-61334-4-61 - Distribution automation using distribution line carrier systems - Part 4-61: Data communication protocols - Network layer - Connectionless protocol
- IEC-61334-5-1 - Distribution automation using distribution line carrier systems - Part 5-1: Lower layer profiles - The spread frequency shift keying (S-FSK) profile
- IEC-61334-5-3 - Distribution automation using distribution line carrier systems - Part 5-3: Lower-layer profiles - Spread spectrum adaptive wideband (SS-AW) profile
- IEC-61334-5-4 - Distribution automation using distribution line carrier systems - Part 5-4: Lower layer profiles - Multi-carrier modulation (MCM) profile
- IEC-61334-5-5 - Distribution automation using distribution line carrier systems - Part 5-5: Lower layer profiles - Spread spectrum - fast frequency hopping (SS-FFH) profile
- IEC-61334-6 - Distribution automation using distribution line carrier systems - Part 6: A-XDR encoding rule
- IEC-61491 - Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives
- IEC-61850-1 - Communication networks and systems for power utility automation - Part 1: Introduction and overview
- IEC-61850-10 - Communication networks and systems for power utility automation - Part 10: Conformance testing
- IEC-61850-10-3 - Communication networks and systems for power utility automation - Part 10-3: Functional testing of IEC 61850 systems
- IEC-61850-1-2 - Communication networks and systems for power utility automation - Part 1-2: Guideline on extending IEC 61850
- IEC-61850-1-2-AM1 - Amendment 1 - Communication networks and systems for power utility automation - Part 1-2: Guideline on extending IEC 61850
- IEC-61850-2 - Communication networks and systems for power utility automation - Part 2: Glossary
- IEC-61850-3 - Communication networks and systems for power utility automation - Part 3: General requirements
- IEC-61850-4 - Communication networks and systems for power utility automation - Part 4: System and project management
- IEC-61850-4-AM1 - Amendment 1 - Communication networks and systems for power utility automation - Part 4: System and project management
- IEC-61850-5 - Communication networks and systems for power utility automation - Part 5: Communication requirements for functions and device models
- IEC-618505-80-4 - Communication networks and systems for power utility automation - Part 80-4: Translation from the COSEM object model (IEC 62056) to the IEC 61850 data model
- IEC-61850-5-AM1 - Amendment 1 - Communication networks and systems for power utility automation - Part 5: Communication requirements for functions and device models
- IEC-61850-6 - Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in electrical substations related to IEDs
- IEC-61850-6-AM1 - Amendment 1 - Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in power utility automation systems related to IEDs
- IEC-61850-6-AM2 - Amendment 2 - Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in electrical substations related to IEDs
- IEC-61850-7-1 - Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles and models
- IEC-61850-7-2 - Communication networks and systems for power utility automation - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI)
- IEC-61850-7-2-AM1 - Amendment 1 - Communication networks and systems for power utility automation - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI)
- IEC-61850-7-3 - Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes
- IEC-61850-7-3-AM1 - Amendment 1 - Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes
- IEC-61850-7-4 - Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes
- IEC-61850-7-410 - Communication networks and systems for power utility automation - Part 7-410: Basic communication structure - Hydroelectric power plants - Communication for monitoring and control
- IEC-61850-7-410-AM1 - Amendment 1 - Communication networks and systems for power utility automation - Part 7-410: Basic communication structure - Hydroelectric power plants - Communication for monitoring and control
- IEC-61850-7-420 - Communication networks and systems for power utility automation - Part 7-420: Basic communication structure - Distributed energy resources and distribution automation logical nodes
- IEC-61850-7-4-AM1 - Amendment 1 - Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes
- IEC-61850-7-5 - Communication networks and systems for power utility automation - Part 7-5: IEC 61850 modelling concepts
- IEC-61850-7-500 - Communication networks and systems for power utility automation - Part 7-500: Basic information and communication structure - Use of logical nodes for modeling application functions and related concepts and guidelines for substations
- IEC-61850-7-510 - Communication networks and systems for power utility automation - Part 7-510: Basic communication structure - Hydroelectric power plants, steam and gas turbines - Modelling concepts and guidelines
- IEC-61850-7-6 - Communication networks and systems for power utility automation - Part 7-6: Guideline for definition of Basic Application Profiles (BAPs) using IEC 61850
- IEC-61850-7-7 - Communication networks and systems for power utility automation - Part 7-7: Machine-processable format of IEC 61850-related data models for tools
- IEC-61850-7-7-AM1 - Amendment 1 - Communication networks and systems for power utility automation - Part 7-7: Machine-processable format of IEC 61850-related data models for tools
- IEC-61850-80-1 - Communication networks and systems for power utility automation - Part 80-1: Guideline to exchanging information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104
- IEC-61850-80-3 - Communication networks and systems for power utility automation - Part 80-3: Mapping to web protocols - Requirements and technical choices
- IEC-61850-80-4 - Communication networks and systems for power utility automation - Part 80-4: Translation from the COSEM object model (IEC 62056) to the IEC 61850 data model
- IEC-61850-80-5 - Communication networks and systems for power utility automation - Part 80-5: Guideline for mapping information between IEC 61850 and IEC 61158-15
- IEC-61850-8-1 - Communication networks and systems for power utility automation - Part 8-1: Specific communication service mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3
- IEC-61850-8-1-AM1 - Communication networks and systems for power utility automation - Part 8-1: Specific communication service mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3
- IEC-61850-8-2 - Communication networks and systems for power utility automation - Part 8-2: Specific communication service mapping (SCSM) - Mapping to Extensible Messaging Presence Protocol (XMPP)
- IEC-61850-90-1 - Communication networks and systems for power utility automation - Part 90-1: Use of IEC 61850 for the communication between substations
- IEC-61850-90-10 - Communication networks and systems for power utility automation - Part 90-10: Models for scheduling
- IEC-61850-90-12 - Communication networks and systems for power utility automation - Part 90-12: Wide area network engineering guidelines
- IEC-61850-90-13 - Communication networks and systems for power utility automation - Part 90-13: Deterministic networking technologies
- IEC-61850-90-14 - Communication networks and systems for power utility automation - Part 90-14: Using IEC 61850 for FACTS (flexible alternate current transmission systems), HVDC (high voltage direct current) transmission and power conversion data modelling
- IEC-61850-90-17 - Communication networks and systems for power utility automation - Part 90-17: Using IEC 61850 to transmit power quality data
- IEC-61850-90-2 - Communication networks and systems for power utility automation - Part 90-2: Using IEC 61850 for communication between substations and control centres
- IEC-61850-90-22 - Communication networks and systems for power utility automation . Part 90-22: SCD based substation network automated management with with visualization and supervision support
- IEC-61850-90-27 - Communication networks and systems for power utility automation - Part 90-27: Use of IEC 61850 for thermal energy systems connected to electric power grid
- IEC-61850-90-3 - Communication networks and systems for power utility automation - Part 90-3: Using IEC 61850 for condition monitoring diagnosis and analysis
- IEC-61850-90-4 - Communication networks and systems for power utility automation - Part 90-4: Network engineering guidelines
- IEC-61850-90-5 - Communication networks and systems for power utility automation - Part 90-5: Use of IEC 61850 to transmit synchrophasor information according to IEEE C37.118
- IEC-61850-90-6 - Communication networks and systems for power utility automation - Part 90-6: Use of IEC 61850 for Distribution Automation Systems
- IEC-61850-90-7 - Communication networks and systems for power utility automation - Part 90-7: Object models for power converters in distributed energy resources (DER) systems
- IEC-61850-90-7-RL - Communication networks and systems for power utility automation - Part 90-7: Object models for power converters in distributed energy resources (DER) systems
- IEC-61850-90-8 - Communication networks and systems for power utility automation - Part 90-8: Object model for E-mobility
- IEC-61850-9-1 - Part 9-1: Specific Communication Service Mapping (Scsm) - Sampled Values Over Serial Unidi
- IEC-61850-9-2 - Communication networks and systems for power utility automation - Part 9-2: Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3
- IEC-61850-9-2-AM1 - Amendment 1 - Communication networks and systems for power utility automation - Part 9-2: Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3
- IEC-61850-SER - Communication networks and systems for power utility automation - ALL PARTS
- IEC-61850 SERIES - Communication networks and systems for power utility automation - ALL PARTS
- IEC-61850-SERIES - Communication networks and systems for power utility automation - ALL PARTS
- IEC-618550-90-5 - Communication networks and systems for power utility automation - Part 90-5: Use of IEC 61850 to transmit synchrophasor information according to IEEE C37.118
- IEC-61968-1 - Application integration at electric utilities - System interfaces for distribution management - Part 1: Interface architecture and general recommendations
- IEC-61968-100 - Application integration at electric utilities - System interfaces for distribution management - Part 100: Implementation profiles
- IEC-61968-11 - Application integration at electric utilities - System interfaces for distribution management - Part 11: Common information model (CIM) extensions for distribution
- IEC-61968-13 - Application integration at electric utilities - System interfaces for distribution management - Part 13: Common distribution power system model profiles
- IEC-61968-14 - Application integration at electric utilities - System interfaces for distribution management - Part 14: MultiSpeak - CIM harmonization
- IEC-61968-2 - Application integration at electric utilities - System interfaces for distribution management - Part 2: Glossary
- IEC-61968-3 - Application integration at electric utilities - System interfaces for distribution management - Part 3: Interface for network operations
- IEC-61968-4 - Application integration at electric utilities - System interfaces for distribution management - Part 4: Interfaces for records and asset management
- IEC-61968-5 - Application integration at electric utilities - System interfaces for distribution management - Part 5: Distributed energy optimization
- IEC-61968-6 - Application integration at electric utilities - System interfaces for distribution management - Part 6: Interfaces for maintenance and construction
- IEC-61968-8 - Application integration at electric utilities - System interfaces for distribution management - Part 8: Interfaces for customer operations
- IEC-61968-9 - Enterprise business function interfaces for utility operations - Part 9: Interfaces for meter reading and control
- IEC-61968-900 - Application integration at electric utilities - System interfaces for distribution management - Part 900: Guidance for implementation of IEC 61968-9
- IEC-61970-1 - Energy management system application program interface (EMS-API) - Part 1: Guidelines and general requirements
- IEC-61970-2 - Energy management system application program interface (EMS-API) - Part 2: Glossary
- IEC-61970-301 - Energy management system application program interface (EMS-API) - Part 301: Common information model (CIM) base
- IEC-61970-301-AM1 - Amendment 1 - Energy management system application program interface (EMS-API) - Part 301: Common information model (CIM) base
- IEC-61970-301-RL - Energy management system application program interface (EMS-API) - Part 301: Common information model (CIM) base - Redline Edition
- IEC-61970-302 - Energy management system application program interface (EMS-API) - Part 302: Common information model (CIM) dynamics
- IEC-61970-401 - Energy management system application program interface (EMS-API) - Part 401: Component interface specification (CIS) framework
- IEC-61970-402 - Part 402: Common Services, Energy Management System Application Program Interface (Ems
- IEC-61970-403 - Part 403: Generic Data Access, Energy Management System Application Program Interface
- IEC-61970-404 - Part 404: High Speed Data Access (Hsda), Energy Management System Application Program
- IEC-61970-405 - Part 405: Generic Eventing & Subscription (Ges), Energy Management System Application
- IEC-61970-407 - Part 407: Time Series Data Access (Tsda), Energy Management System Application Progra
- IEC-61970-452 - Energy management system application program interface (EMS-API) - Part 452: CIM static transmission network model profiles
- IEC-61970-453 - Energy management system application program interface (EMS-API) - Part 453: Diagram layout profile
- IEC-61970-453-AM1 - Amendment 1 - Energy management system application program interface (EMS-API) - Part 453: Diagram layout profile
- IEC-61970-456 - Energy management system application program interface (EMS-API) - Part 456: Solved power system state profiles
- IEC-61970-456-AM1 - Amendment 1 - Energy management system application program interface (EMS-API) - Part 456: Solved power system state profiles
- IEC-61970-457 - Energy management system application program interface (EMS-API) - Part 457: Dynamics profile
- IEC-61970-501 - Energy management system application program interface (EMS-API) - Part 501: Common Information Model Resource Description Framework (CIM RDF) schema
- IEC-61970-552 - Energy management system application program interface (EMS-API) - Part 552: CIMXML Model exchange format
- IEC-61970-555 - Energy management system application program interface (EMS-API) - Part 555: CIM based efficient model exchange format (CIM/E)
- IEC-61970-556 - Energy management system application program interface (EMS-API) - Part 556: CIM based graphic exchange format (CIM/G)
- IEC-61970-600-1 - Energy management system application program interface (EMS-API) - Part 600-1: Common Grid Model Exchange Standard (CGMES) - Structure and rules
- IEC-61970-600-2 - Energy management system application program interface (EMS-API) - Part 600-2: Common Grid Model Exchange Standard (CGMES) - Exchange profiles specification
- IEC-61970-CGMES - Energy management system application program interface (EMS-API) - Common Grid Model Exchange Specification (CGMES)
- IEC-61970-SERIES - Energy management system application program interface (EMS-API) - ALL PARTS
- IEC-62008 - Performance characteristics and calibration methods for digital data acquisition systems and relevant software
- IEC-62026-7 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet
- IEC-62053-61 - Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements
- IEC-62210 - Power system control and associated communications - Data and communication security
- IEC-62325-101 - Framework for energy market communications - Part 101: General guidelines
- IEC-62325-102 - Framework for energy market communications - Part 102: Energy market model example
- IEC-62325-103 - Framework for energy market communications - Part 103: Review of information exchanges within the deregulated European style retail energy market from a CIM perspective
- IEC-62325-301 - Framework for energy market communications - Part 301: Common information model (CIM) extensions for markets
- IEC-62325-351 - Framework for energy market communications - Part 351: CIM European market model exchange profile
- IEC-62325-450 - Framework for energy market communications - Part 450: Profile and context modelling rules
- IEC-62325-451-1 - Framework for energy market communications - Part 451-1: Acknowledgement business process and contextual model for CIM European market
- IEC-62325-451-2 - Framework for energy market communications - Part 451-2: Scheduling business process and contextual model for CIM European market
- IEC-62325-451-3 - Framework for energy market communications - Part 451-3: Transmission capacity allocation business process (explicit or implicit auction) and contextual models for European market
- IEC-62325-451-3-AM1 - Amendment 1 - Framework for energy market communications - Part 451-3: Transmission capacity allocation business process (explicit or implicit auction) and contextual models for European market
- IEC-62325-451-4 - Framework for energy market communications - Part 451-4: Settlement and reconciliation business process, contextual and assembly models for European market
- IEC-62325-451-5 - Framework for energy market communications - Part 451-5: Problem statement and status request business processes, contextual and assembly models for European market
- IEC-62325-451-6 - Framework for energy market communications - Part 451-6: Publication of information on market, contextual and assembly models for European-style markets
- IEC-62325-451-8 - Framework for energy market communications - Part 451-8: HVDC Scheduling process, contextual and assembly models for European style market
- IEC-62325-501 - Framework for energy market communications - Part 501: General guidelines for use of ebXML
- IEC-62325-502 - Framework for energy market communications - Part 502: Profile of ebXML
- IEC-62325-503 - Framework for energy market communications - Part 503: Market data exchanges guidelines for the IEC 62325-351 profile
- IEC-62325-504 - Framework for energy market communications - Part 504: Utilization of web services for electronic data interchanges on the European energy market for electricity
- IEC-62351-1 - Power systems management and associated information exchange - Data and communications security - Part 1: Communication network and system security - Introduction to security issues
- IEC-62351-10 - Power systems management and associated information exchange - Data and communications security - Part 10: Security architecture guidelines
- IEC-62351-100-1 - Power systems management and associated information exchange - Data and communications security - Part 100-1: Conformance test cases for IEC TS 62351-5 and IEC TS 60870-5-7
- IEC-62351-100-3 - Power systems management and associated information exchange - Data and communications security - Part 100-3: Conformance test cases for the IEC 62351-3, the secure communication extension for profiles including TCP/IP
- IEC-62351-100-4 - Power systems management and associated information exchange - Data and communication security - Part 100-4: Cybersecurity conformance testing for IEC 62351-4
- IEC-62351-100-6 - Power systems management and associated information exchange - Data and communications security - Part 100-6: Cybersecurity conformance testing for IEC 61850-8-1 and IEC 61850-9-2
- IEC-62351-11 - Power systems management and associated information exchange - Data and communications security - Part 11: Security for XML documents
- IEC-62351-12 - Power systems management and associated information exchange - Data and communications security - Part 12: Resilience and security recommendations for power systems with distributed energy resources (DER) cyber-physical systems
- IEC-62351-13 - Power systems management and associated information exchange - Data and communications security - Part 13: Guidelines on security topics to be covered in standards and specifications
- IEC-62351-2 - Power systems management and associated information exchange - Data and communications security - Part 2: Glossary of terms
- IEC-62351-3 - Power systems management and associated information exchange - Data and communications security - Part 3: Communication network and system security - Profiles including TCP/IP
- IEC-62351-3-AM1 - Amendment 1 - Power systems management and associated information exchange - Data and communications security - Part 3: Communication network and system security - Profiles including TCP/IP
- IEC-62351-4 - Power systems management and associated information exchange - Data and communications security - Part 4: Profiles including MMS and derivatives
- IEC-62351-5 - Power systems management and associated information exchange - Data and communications security - Part 5: Security for IEC 60870-5 and derivatives
- IEC-62351-6 - Power systems management and associated information exchange - Data and communications security - Part 6: Security for IEC 61850
- IEC-62351-7 - Power systems management and associated information exchange - Data and communications security - Part 7: Network and System Management (NSM) data object models
- IEC-62351-8 - Power systems management and associated information exchange - Data and communications security - Part 8: Role-based access control for power system management
- IEC-62351-9 - Power systems management and associated information exchange - Data and communications security - Part 9: Cyber security key management for power system equipment
- IEC-62351-90-1 - Power systems management and associated information exchange - Data and communications security - Part 90-1: Guidelines for handling role-based access control in power systems
- IEC-62351-90-2 - Power systems management and associated information exchange . Data and communications security . Part 90-2: Deep packet inspection of encrypted communications
- IEC-62351-90-3 - Power systems management and associated information exchange - Data and communications security - Part 90-3: Guidelines for network and system management
- IEC-62351-SERIES - Power systems management and associated information exchange - Data and communications security - ALL PARTS
- IEC-62357 - Power System Control & Associated Communications - Referencearchitecture for Object Model
- IEC-62357-1 - Power systems management and associated information exchange - Part 1: Reference architecture
- IEC-62357-2 - Power systems management and associated information exchange - Part 2: Use Cases and role model
- IEC-62357-200 - Power systems management and associated information exchange - Part 200: Guidelines for migration from internet Protocol version 4 (IPv4) to Internet Protocol version 6 (IPv6)
- IEC-62361-100 - Power systems management and associated information exchange - Interoperability in the long term - Part 100: CIM profiles to XML schema mapping
- IEC-62361-102 - Power systems management and associated information exchange - Interoperability in the long term - Part 102: CIM - IEC 61850 harmonization
- IEC-62361-103 - Power systems management and associated information exchange - Interoperability in the long term - Part 103: Standard profiling
- IEC-62361-2 - Power systems management and associated information exchange - Interoperability in the long term - Part 2: End to end quality codes for supervisory control and data acquisition (SCADA)
- IEC-62488-1 - Power line communication systems for power utility applications - Part 1: Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids
- IEC-62488-2 - Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC
- IEC-62488-3 - Power line communication systems for power utility applications - Part 3: Digital Power Line Carrier (DPLC) terminals and hybrid ADPLC terminals
- IEC-62746-10-1 - Systems interface between customer energy management system and the power management system - Part 10-1: Open automated demand response
- IEC-62746-10-3 - Systems interface between customer energy management system and the power management system - Part 10-3: Open automated demand response . Adapting smart grid user interfaces to the IEC common information model
- IEC-62746-2 - Systems interface between customer energy management system and the power management system - Part 2: Use cases and requirements
- IEC-62746-3 - Systems interface between customer energy management system and the power management system - Part 3: Architecture
- IEC-62746-4 - Systems interface between customer energy management system and the power management system - Part 4: Demand Side Resource Interface
- IEC-62843 - Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment
- IEC-62939-1 - Smart grid user interface - Part 1: Interface overview and country perspectives
- IEC-62939-2 - Smart grid user interface . Part 2: Architecture and requirements
- IEC-63191 - Demand side power quality management
- IEC-63266 - Representation of communication in power utility automation
- IEC-63384-1 - Power system stability control - Part 1: Guideline for framework design of power system stability control
- IEC-864-1 - Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment. Part 1: Interface standards for systems using dedicated interconnections
- IEC-864-1-1 - Amendment No. 1
- IEC-870-1-1 - Telecontrol equipment and systems. Part 1: General considerations. Section One: General principles
- IEC-870-1-2 - Telecontrol equipment and systems. Part 1: General considerations. Section Two: Guide for specifications
- IEC-870-1-4 - Telecontrol equipment and systems - Part 1: General considerations - Section 4: Basic aspects of telecontrol data transmission and organization of standards IEC 870-5 and IEC 870-6
- IEC-870-3 - Telecontrol equipment and systems. Part 3: Interfaces (electrical characteristics)
- IEC-870-4 - Telecontrol equipment and systems. Part 4: Performance requirements
- IEC-870-5-1 - Telecontrol equipment and systems. Part 5: Transmission protocols - Section One: Transmission frame formats
- IEC-870-5-102 - Telecontrol equipment and systems - Part 5: Transmission protocols - Section 102: Companion standard for the transmission of integrated totals in electric power systems
- IEC-870-5-2 - Telecontrol equipment and systems - Part 5: Transmission protocols - Section 2: Link transmission procedures
- IEC-870-5-3 - Telecontrol equipment and systems - Part 5: Transmission protocols - Section 3: General structure of application data
- IEC-870-5-4 - Telecontrol equipment and systems - Part 5: Transmission protocols - Section 4: Definition and coding of application information elements
- IEC-870-5-5 - Telecontrol equipment and systems - Part 5: Transmission protocols - Section 5: Basic application functions
- IEC-870-6-1 - Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 1: Application context and organization of standards
- IEC-870-6-2 - Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 2: Use of basic standards (OSI layers 1-4)
- IEC-870-6-501 - Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 501: TASE.1 Service definitions
- IEC-870-6-502 - Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 502: TASE.1 Protocol definitions
- IEC-870-6-601 - Telecontrol equipment and systems - Part 6: Telecontrol protocol s compatible with ISO standards and ITU-T recommendations - Sect ion 601: Functional profile for providing the connection-oriente d transport service in an end system connected via permanent acc ess to a packet switched data network
- IEC/IEEE-61850-9-3 - Communication networks and systems for power utility automation - Part 9-3: Precision time protocol profile for power utility automation
- IEC/PAS-61850-9-3 - Communication networks and systems for power utility automation - Part 9-3: Precision time protocol profile for power utility automation
- IEC/PAS-62026-7 - Part 7: Componet, Low-Voltage Switchgear & Controlgear - Controller-Device Interfaces
- IEC/PAS-62249 - Qualification & Performance Specification for Flexible Printed Boards
- IEC/PAS-62293 - Qualification & Performance Specification for High Density Interconnect (Hdi) Layers or Bo
- IEC/PAS-62746-10-1 - Systems interface between customer energy management system and the power management system - Part 10-1: Open Automated Demand Response (OpenADR 2.0b Profile Specification)
- IEC-SRD-62913-2-1 - Generic smart grid requirements - Part 2-1: Grid related domains
- IEC-SRD-62913-2-2 - Generic smart grid requirements - Part 2-2: Market related domain
- IEC/SRD-62913-2-2 - Generic smart grid requirements - Part 2-2: Market related domain
- IEC-SRD-62913-2-3 - Generic smart grid requirements - Part 2-3: Resources connected to the grid domains
- IEC/SRD-62913-2-3 - Generic smart grid requirements - Part 2-3: Resources connected to the grid domains
- IEC/SRD-62913-2-4 - Generic smart grid requirements - Part 2-4: Electric transportation related domain
Other SDOs:
- DIN-EN-13757-4 - Communication systems for meters and remote reading of meters - Part 4: Wireless meter readout (Radio meter reading for operation in SRD bands)
- EN-13757-1 - Communication systems for meters - Part 1: Data exchange
- EN-13757-3 - Communication systems for and remote reading of meters - Part 3: Dedicated application layer
- EN-13757-4 - Communication systems for meters and remote reading of meters - Part 4: Wireless meter readout (Radio meter reading for operation in SRD bands)
- EN-13757-5 - Communication systems for meters - Part 5: Wireless M-Bus relaying
- EN-13757-6 - Communication systems for meters - Part 6: Local Bus
- EN-13757-7 - Communication systems for meters - Part 7: Transport and security services
- EN-16836-1 - Communication systems for meters - Wireless mesh networking for meter data exchange - Part 1: Introduction and standardization framework
- EN-16836-2 - Communication systems for meters - Wireless mesh networking for meter data exchange - Part 2: Networking layer and stack specification
- EN-16836-3 - Communication systems for meters - Wireless mesh networking for meter data exchange - Part 3: Energy profile specification dedicated application layer
- EN-50239 - Railway applications - Radio remote control system of traction vehicle for freight traffic
- EN-60864-2 - Standardization of Interconnections Between Broadcasting Transmitter Systems & Supervi
- EN-60870-5-101 - Telecontrol equipment and systems - Part 5-101: Transmission protocols - Companion standard for basic telecontrol tasks
- EN-60870-5-104 - Telecontrol equipment and systems - Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles
- EN-60870-5-6 - Telecontrol Equipment & Systems, Guidelines for Conformance Testing for En-60870-5 Co
- EN-60870-6-503 - Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and protocol
- EN-60870-6-702 - Telecontrol equipment and systems - Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.2 application service in end systems
- EN-60870-6-802 - Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models
- EN-61850-10 - Communication networks and systems for power utility automation - Part 10: Conformance testing
- EN-61850-3 - Communication networks and systems for power utility automation - Part 3: General requirements
- EN-61850-4 - Communication networks and systems for power utility automation - Part 4: System and project management
- EN-61850-5 - Communication networks and systems for power utility automation - Part 5: Communication requirements for functions and device models
- EN-61850-7-1 - Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles and models
- EN-61850-7-3 - Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes
- EN-61850-7-4 - Part 7-4: Basic Communication Structure - Compatible Logical Node Classes & Data Objec
- EN-61850-7-410 - Communication networks and systems for power utility automation - Part 7-410: Basic communication structure - Hydroelectric power plants - Communication for monitoring and control
- EN-61850-7-420 - Part 7-420: Basic Communication Structure - Distributed Energy Resources Logical Nodes
- EN-61850-8-1 - Communication networks and systems for power utility automation - Part 8-1: Specific communication service mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3
- EN-61850-9-2 - Communication networks and systems for power utility automation - Part 9-2: Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3
- EN-61968-1 - Application integration at electric utilities - System interfaces for distribution management - Part 1: Interface architecture and general recommendations
- EN-61968-100 - Application integration at electric utilities - System interfaces for distribution management - Part 100: Implementation profiles
- EN-61968-11 - Application integration at electric utilities - System interfaces for distribution management - Part 11: Common information model (CIM) extensions for distribution
- EN-61968-13 - Part 13: Cim Rdf Model Exchange Format for Distribution, Application Integration at El
- EN-61968-4 - Part 4: Interfaces for Records & Asset Management, Application Integration at Electric
- EN-61968-6 - Application integration at electric utilities - System interfaces for distribution management - Part 6: Interfaces for maintenance and construction
- EN-61968-8 - Application integration at electric utilities - System interfaces for distribution management - Part 8: Interfaces for customer operations
- EN-61968-9 - Application integration at electric utilities - System interfaces for distribution management - Part 9: Interfaces for meter reading and control
- EN-61970-301 - Energy management system application program interface (EMS-API) - Part 301: Common information model (CIM) base
- EN-61970-402 - Part 402: Common Services, Energy Management System Application Program Interface (Ems
- EN-61970-403 - Part 403: Generic Data Access, Energy Management System Application Program Interface
- EN-61970-404 - Part 404: High Speed Data Access (Hsda), Energy Management System Application Program
- EN-61970-405 - Part 405: Generic Eventing & Subscription (Ges), Energy Management System Application
- EN-61970-407 - Part 407: Time Series Data Access (Tsda), Energy Management System Application Progra
- EN-61970-452 - Energy management system application program interface (EMS-API) - Part 452: CIM static transmission network model profiles
- EN-61970-453 - Energy management system application program interface (EMS-API) - Part 453: Diagram layout profile
- EN-61970-456 - Energy management system application program interface (EMS-API) - Part 456: Solved power system state profiles
- EN-61970-501 - Energy Management System Application Program Interface (Ems-API), Common Information M
- EN-61970-552 - Energy management system application program interface (EMS-API) - Part 552: CIMXML Model exchange format
- EN-62026-7 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet
- EN-62325-301 - Framework for energy market communications - Part 301: Common information model (CIM) extensions for markets
- EN-62325-351 - Framework for energy market communications - Part 351: CIM European market model exchange profile
- EN-62325-450 - Framework for energy market communications - Part 450: Profile and context modelling rules
- EN-62325-451-1 - Framework for energy market communications - Part 451-1: Acknowledgement business process and contextual model for CIM European market
- EN-62325-451-2 - Framework for energy market communications - Part 451-2: Scheduling business process and contextual model for CIM European market
- EN-62325-451-3 - Framework for energy market communications - Part 451-3: Transmission capacity allocation business process (explicit or implicit auction) and contextual models for European market
- EN-62325-451-4 - Framework for energy market communications - Part 451-4: Settlement and reconciliation business process, contextual and assembly models for European market
- EN-62325-451-5 - Framework for energy market communications - Part 451-5: Problem statement and status request business processes, contextual and assembly models for European market
- EN-62325-451-6 - Framework for energy market communications - Part 451-6: Publication of information on market, contextual and assembly models for European style market
- EN-62351-11 - Power systems management and associated information exchange - Data and communications security - Part 11: Security for XML documents
- EN-62351-3 - Power systems management and associated information exchange - Data and communications security - Part 3: Communication network and system security - Profiles including TCP/IP
- EN-62351-7 - Power systems management and associated information exchange. Data and communications security. Network and System Management (NSM) data object models
- EN-62351-9 - Power systems management and associated information exchange - Data and communications security - Part 9: Cyber security key management for power system equipment
- EN-62361-100 - Power systems management and associated information exchange - Interoperability in the long term - Part 100: CIM profiles to XML schema mapping
- EN-62361-2 - Power systems management and associated information exchange - Interoperability in the long term - Part 2: End to end quality codes for supervisory control and data acquisition (SCADA)
- EN-62488-1 - Power line communication systems for power utility applications - Part 1: Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids
- EN-62488-2 - Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC
- EN-IEC-61850-8-2 - Communication networks and systems for power utility automation - Part 8-2: Specific Communication Service Mapping (SCSM) - Mapping to Extensible Messaging Presence Protocol (XMPP) (IEC 61850-8-2:2018)
- EN-IEC-61968-3 - Application integration at electric utilities - System interfaces for distribution management - Part 3: Interface for network operations
- EN-IEC-61968-4 - Application integration at electric utilities - System interfaces for distribution management - Part 4: Interfaces for records and asset management (IEC 61968-4:2019)
- EN-IEC-61970-456 - Energy management system application program interface (EMS-API) - Part 456: Solved power system state profiles
- EN-IEC-62325-301 - Framework for energy market communications - Part 301: Common information model (CIM) extensions for markets
- EN-IEC-62325-451-6 - Framework for energy market communications - Part 451-6: Publication of information on market, contextual and assembly models for European-style markets
- EN-IEC-62325-503 - Framework for energy market communications - Part 503: Market data exchanges guidelines for the IEC 62325-351 profile
- SIS-CEN/TR-17167 - Communication system for meters - Accompanying TR to EN 13757-2,-3 and -7, Examples and supplementary information
- SS-EN-13757-1 - Communication systems for meters - Part 1: Data exchange
- SS-EN-13757-2 - Communication systems for meters - Part 2: Wired M-Bus communication
- SS-EN-13757-3 - Communication systems for meters - Part 3: Application protocols
- SS-EN-13757-4 - Communication systems for meters - Part 4: Wireless M-Bus communication
- SS-EN-13757-5 - Communication systems for meters - Part 5: Wireless M-Bus relaying
- SS-EN-13757-6 - Communication systems for meters - Part 6: Local Bus
- SS-EN-13757-7 - Communication systems for meters - Part 7: Transport and security services
- SS-EN-13757-8 - Communication systems for meters - Part 8: Adaptation layer
- SS-EN-1434-3 - Heat meters - Part 3: Data exchange and interfaces
- SS-EN-16836-1 - Communication systems for meters - Wireless mesh networking for meter data exchange - Part 1: Introduction and standardization framework
- SS-EN-16836-2 - Communication systems for meters - Wireless mesh networking for meter data exchange - Part 2: Networking layer and stack specification
- SS-EN-16836-3 - Communication systems for meters - Wireless mesh networking for meter data exchange - Part 3: Energy profile specification dedicated application layer
- SS-EN-50710 - Requirements for the provision of secure remote services for fire safety systems and security systems
- UNE-EN-16836-1 - Communication systems for meters - Wireless mesh networking for meter data exchange - Part 1: Introduction and standardization framework
- UNE-EN-16836-2 - Communication systems for meters - Wireless mesh networking for meter data exchange - Part 2: Networking layer and stack specification