Document Center List of Standards on Other Products Of The Chemical Industry
ICS Code 71.100.99
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1025 - Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
- ASTM-C1039 - Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
- ASTM-C454 - Standard Test Method for Disintegration of Carbon Refractories by Alkali
- ASTM-C559 - Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
- ASTM-C611 - Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
- ASTM-C651 - Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
- ASTM-C767 - Standard Test Method for Thermal Conductivity of Carbon Refractories
- ASTM-C769 - Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus
- ASTM-C783 - Standard Practice for Core Sampling of Graphite Electrodes
- ASTM-C886 - Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
- ASTM-D1342 - Standard Test Method for Paraffin-Type Hydrocarbons in Carnauba Wax (Withdrawn 2007)
- ASTM-D1436 - Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
- ASTM-D1455 - Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish
- ASTM-D1791 - Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes
- ASTM-D1792 - Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes
- ASTM-D1793 - Standard Test Method for Water Spotting of Emulsion Floor Polishes
- ASTM-D2022 - Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches
- ASTM-D2047 - Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
- ASTM-D2048 - Standard Test Method for Powdering of Floor Polish Films
- ASTM-D2180 - Standard Test Method for Active Oxygen in Bleaching Compounds
- ASTM-D2834 - Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
- ASTM-D3052 - Standard Practice for Rating Water-Emulsion Floor Polishes
- ASTM-D3092 - Standard Test Method for Particle-Size Distribution of Space-Insecticide Aerosol (Withdrawn 2002)
- ASTM-D3153 - Standard Test Method for Recoatability of Water-Emulsion Floor Polishes
- ASTM-D3206 - Standard Test Method for Soil Resistance of Floor Polishes
- ASTM-D3207 - Standard Test Method for Detergent Resistance of Floor Polish Films
- ASTM-D3209 - Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes
- ASTM-D3210 - Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
- ASTM-D3263 - Standard Test Methods for Corrosivity of Solvent Systems for Removing Water-Formed Deposits (Withdrawn 2008)
- ASTM-D3430 - Standard Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes
- ASTM-D3440 - Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes
- ASTM-D3543 - Standard Test Method for Metal Glide Adhesion
- ASTM-D3564 - Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring
- ASTM-D3714 - Test Method for Black Marking Resistance of Floor Polishes as Measured by the Ladder and Pendulum Apparatus (Withdrawn 1994)
- ASTM-D3751 - Standard Practice for Evaluation of Furniture Polish
- ASTM-D3757 - Standard Guide for Preparing Specifications for Solvent-based Floor Polishes
- ASTM-D3758 - Standard Practice for Evaluation of Spray-Buff Products on Test Floors
- ASTM-D3836 - Standard Practice for Evaluation of Automotive Polish
- ASTM-D3954 - Standard Test Method for Dropping Point of Waxes
- ASTM-D4002 - Standard Practice for Evaluation of Buffable Shoe Polish
- ASTM-D4078 - Standard Specification for Water Emulsion Floor Polish
- ASTM-D4081 - Standard Specification for Drycleaning-Grade Perchloroethylene
- ASTM-D4095 - Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes
- ASTM-D4126 - Standard Specification for Vapor-Degreasing Grade and General Solvent Grade
1,1,1-Trichloroethane (Withdrawn 2017) - ASTM-D4330 - Standard Practice for Evaluation of Fiberglass Boat Polish and Wax
- ASTM-D4376 - Standard Specification for Vapor-Degreasing Grade Perchloroethylene
- ASTM-D4386 - Standard Practice for Application of Floor Polishes to Maintain Multilayer Composite Tile or Flooring
- ASTM-D4743 - Standard Test Method for Efficacy of Solvent Systems for Dissolving Water-Formed Deposits (Withdrawn 2003)
- ASTM-D4757 - Standard Practice for Placarding Solvent Vapor Degreasers (Withdrawn 2004)
- ASTM-D4955 - Standard Practice for Field Evaluation of Automotive Polish
- ASTM-D5127 - Standard Guide for Ultra-Pure Water Used in the Electronics and Semiconductor Industries
- ASTM-D5678 - Standard Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish
- ASTM-D6107 - Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
- ASTM-D6743 - Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
- ASTM-D7084 - Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
- ASTM-D7817 - Standard Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins
- ASTM-D7972 - Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
- ASTM-E1517 - Standard Test Method for Determining the Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Human Louse Ova (Withdrawn 2017)
- ASTM-E2346 - Standard Guide for Sensory Evaluation of Household Hard Surface-Cleaning Products with Emphasis on Spray Triggers
- ASTM-E2407 - Standard Test Method for Effectiveness of Defoaming Agents (Withdrawn 2024)
- ASTM-E299 - Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
- ASTM-E551 - Test Methods for Developing Effective Bird Control Chemicals (Withdrawn 2000)
- ASTM-E554 - Guide for Use and Development of Strychnine as an Avicide (Withdrawn 2000)
- ASTM-E555 - Practice for Determining Acute Oral LD50 for Testing Vertebrate Control Agents (Withdrawn 2000)
- ASTM-E565 - Test Method for Efficacy of a Single-Dose Acute Rodenticide Under Laboratory Conditions for Commensal Rodents (Withdrawn 2000)
- ASTM-E589 - Guide for the Use and Development of PA-14 Avian Stressing Agent (Withdrawn 2000)
- ASTM-E590 - Guide for the Use and Development of Sodium Monofluoroacetate (Compount 1080) as a Predacide (Withdrawn 2000)
- ASTM-E593 - Test Method for Efficacy of a Multiple-Dose Rodenticide Under Laboratory Conditions (Withdrawn 2000)
- ASTM-E652 - Standard Test Method for Nonresidual Liquid Household Insecticides Against Flying Insects (Withdrawn 2018)
- ASTM-E653 - Standard Test Method for Effectiveness of Aerosol and Pressurized Space Spray Insecticides Against Flying Insects (Withdrawn 2018)
- ASTM-E939 - Standard Test Method of Field Testing Topical Applications of Compounds as Repellents for Medically Important and Pest Arthropods (Including Insects, Ticks, and Mites):I Mosquitoes (Withdrawn 2017)
- ASTM-E951 - Standard Test Methods for Laboratory Testing of Non-Commercial Mosquito Repellent Formulations On the Skin (Withdrawn 2015)
- ASTM-F1972 - Standard Guide for Terminology Relating to Candles and Associated Accessory Items
- ASTM-F2058 - Standard Specification for Candle Fire Safety Labeling
- ASTM-F2601 - Standard Specification for Fire Safety for Candle Accessories
- ASTM-F58 - Test Method of Measuring Specific Resistivity of Electronic Grade Solvents (Withdrawn 1998)
- ASTM-F766 - Standard Test Method for Melting Point of Waxes (Withdrawn 2016)
BSI:
- BS-2540 - Specification for granular desiccant silica gel
- BS-2541 - Specification for activated alumina for use as desiccant
- BS-3482 - Methods of test for desiccants used in dynamic dehumidification equipment
- BS-3482-1 - Methods of test for desiccants
- BS-3482-10 - Methods of test for desiccants
- BS-3482-11 - Methods of test for desiccants. Determination of friability and dust content
- BS-3482-2 - Methods of test for desiccants
- BS-3482-3 - Methods of test for desiccants
- BS-3482-4 - Methods of test for desiccants
- BS-3482-5 - Methods of test for desiccants
- BS-3482-6 - Methods of test for desiccants
- BS-3482-7 - Methods of test for desiccants
- BS-3482-8 - Methods of test for desiccants
- BS-3482-9 - Methods of test for desiccants
- BS-3523 - Specification for granular desiccant silica gel impregnated with cobalt chloride
- BS-3769 - Specification for copper naphthenate and copper naphthenate concentrates
- BS-3770 - Specification for zinc naphthenate and zinc naphthenate concentrates
- BS-4024 - Specification for pentachlorophenyl laurate
- BS-4630 - Specification for tributyltin oxide (di(tributyltin) oxide)
- BS-7391 - Method for determination of aniline point and mixed aniline point of petroleum products and hydrocarbon solvents
- BS-7444 - Specification for molecular sieves (of type 4A)
- BS-7554 - Specification for beaded desiccant silica gel
- BS-7954 - Beaded desiccant activated alumina. Specification
- BS-7959-1 - Materials used for the control of liquid spillages
- BS-7959-2 - Materials used for the control of liquid spillages
- BS-EN-15426 - Candles. Specification for sooting behaviour
- BS-EN-15426-TC - Tracked Changes. Candles. Specification for sooting behaviour
- BS-EN-15493 - Candles. Specification for fire safety
- BS-EN-15494 - Candles. Product safety labels
- BS-EN-17885 - Candle Accessories. Specification for fire safety and product safety labels
- BS-EN-ISO-17516 - Cosmetics. Microbiology. Microbiological limits
- PAS-130 - Guidance on the labelling of manufactured nanoparticles and products containing manufactured nanoparticles
- PAS-135 - Terminology for nanofabrication
- PAS-136 - Terminology for nanomaterials
- PAS-137 - Nanomaterials and nanotechnology-based products. Guide to regulation and standards
- PD-ISO-12885 - Nanotechnologies. Health and safety practices in occupational settings
ISO:
Other SDOs:
- EN-15426 - Candles - Specificatioon for Sooting Behaviour
- EN-15493 - Candles, Specification for Fire Safety
- EN-15494 - Candles, Product Safety Labels
- EN-ISO-17516 - Cosmetics - Microbiology - Microbiological limits
- SS-EN-15426 - Candles - Specification for sooting behaviour
- SS-EN-15493 - Candles - Specification for fire safety
- SS-EN-15494 - Candles - Product safety labels
- SS-EN-17616 - Outdoor candles - Specification for fire safety
- SS-EN-17617 - Outdoor candles - Product safety labels
- SS-EN-17885 - Candle Accessories - Specification for fire safety and product safety labels
- SS-EN-ISO-17516 - Cosmetics - Microbiology - Microbiological limits (ISO 17516:2014)
- SS-EN-ISO-21150 - Cosmetics - Microbiology - Detection of Escherichia coli (ISO 21150:2015)
- SS-EN-ISO-21150-AM1 - Cosmetics - Microbiology - Detection of Escherichia coli - Amendment 1 (ISO 21150:2015/Amd 1:2022)