01.08: Fasteners; Rolling Element Bearings
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-A307 - Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
- ASTM-A31 - Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
- ASTM-A325 - Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016)
- ASTM-A325M - Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric) (Withdrawn 2016)
- ASTM-A354 - Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
- ASTM-A394 - Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
- ASTM-A449 - Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
- ASTM-A489 - Standard Specification for Carbon Steel Eyebolts
- ASTM-A490 - Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016)
- ASTM-A490M - Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric) (Withdrawn 2016)
- ASTM-A502 - Standard Specification for Rivets, Steel, Structural
- ASTM-A563 - Standard Specification for Carbon and Alloy Steel Nuts
- ASTM-A563M - Standard Specification for Carbon and Alloy Steel Nuts (Metric) (Withdrawn 2021)
- ASTM-A574 - Standard Specification for Alloy Steel Socket-Head Cap Screws
- ASTM-A574M - Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric) (Withdrawn 2015)
- ASTM-A687 - Standard Specification for High-Strength Nonheaded Steel Bolts and Studs (Withdrawn 1999)
- ASTM-D3337 - Standard Test Method for Determining Life and Torque of Lubricating Greases in Small Ball Bearings (Withdrawn 2009)
- ASTM-F1077 - Standard Guide for Selection of Committee F16 Fastener Specifications (Withdrawn 2014)
- ASTM-F1135 - Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners (Withdrawn 2009)
- ASTM-F1136 - Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
- ASTM-F1136M - Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners [Metric] (Withdrawn 2011)
- ASTM-F1137 - Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
- ASTM-F1178 - Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture
- ASTM-F1428 - Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
- ASTM-F1469 - Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing (Withdrawn 2018)
- ASTM-F1470 - Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
- ASTM-F1503 - Standard Practice for Machine/Process Capability Study Procedure (Withdrawn 2018)
- ASTM-F1546 - Standard Specification for Fire Hose Nozzles
- ASTM-F1547 - Standard Guide for Listing Relevant Standards and Publications for Commercial Shipbuilding (Withdrawn 2015)
- ASTM-F1548 - Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
- ASTM-F1554 - Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
- ASTM-F1565 - Standard Specification for Pressure-Reducing Valves for Steam Service
- ASTM-F1567 - Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
- ASTM-F1575 - Standard Test Method for Determining Bending Yield Moment of Nails
- ASTM-F1626 - Standard Practice for Preparing Shipboard Fire Control Plans (Withdrawn 2008)
- ASTM-F1667 - Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
- ASTM-F1669M - Standard Specification for Insulation Monitors for Shipboard Electrical Systems [Metric]
- ASTM-F1685 - Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems
- ASTM-F1716 - Standard Guide for Transition and Performance of Marine Software Systems Maintenance
- ASTM-F1718 - Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
- ASTM-F1754 - Standard Guide for Marine Vessel Structural Inspection Considerations (Withdrawn 2012)
- ASTM-F1755M - Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric)
- ASTM-F1756 - Standard Guide for Implementation of a Fleet Management System Network (Withdrawn 2015)
- ASTM-F1757 - Standard Guide for Digital Communication Protocols for Computerized Systems
- ASTM-F1789 - Standard Terminology for F16 Mechanical Fasteners
- ASTM-F1791 - Standard Specification for Filters Used in Air or Nitrogen Systems
- ASTM-F1792 - Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
- ASTM-F1793 - Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air or Nitrogen Service
- ASTM-F1794 - Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems
- ASTM-F1795 - Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems
- ASTM-F1799 - Standard Guide for Shipboard Generated Waste Management Audits
- ASTM-F1808 - Standard Guide for Weight Control Technical Requirements for Surface Ships
- ASTM-F1835 - Standard Guide for Cable Splicing Installations
- ASTM-F1836M - Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)
- ASTM-F1837M - Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
- ASTM-F1852 - Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016)
- ASTM-F1878 - Standard Guide for Escort Vessel Evaluation and Selection
- ASTM-F1883 - Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units
- ASTM-F1940 - Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
- ASTM-F1941 - Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric
- ASTM-F1941M - Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric] (Withdrawn 2015)
- ASTM-F1985 - Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves
- ASTM-F1994 - Standard Test Method for Shipboard Fixed Foam Firefighting Systems
- ASTM-F2001 - Standard Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record
- ASTM-F2014 - Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
- ASTM-F2015 - Standard Specification for Lap Joint Flange Pipe End Applications
- ASTM-F2016 - Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings
- ASTM-F2017 - Standard Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration
- ASTM-F2039 - Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program
- ASTM-F2044 - Standard Specification for Liquid Level Indicating Equipment, Electrical
- ASTM-F2045 - Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic
- ASTM-F2046 - Standard Specification for Tachometers, Various
- ASTM-F2070 - Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic
- ASTM-F2071 - Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
- ASTM-F2087 - Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick
- ASTM-F2094 - Standard Specification for Silicon Nitride Bearing Balls
- ASTM-F2133 - Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Insulated Marine Bulkheads and Decks, Constructed of Steel (Withdrawn 2013)
- ASTM-F2154 - Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced
- ASTM-F2161 - Standard Guide for Instrument and Precision Bearing Lubricants—Part 1 Oils
- ASTM-F2162 - Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
- ASTM-F2163 - Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring
- ASTM-F2168 - Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring
- ASTM-F2191 - Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
- ASTM-F2192 - Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders
- ASTM-F2215 - Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
- ASTM-F2218 - Standard Guide for Hardware Implementation for Computerized Systems
- ASTM-F2246 - Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
- ASTM-F2280 - Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016)
- ASTM-F2281 - Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
- ASTM-F2282 - Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
- ASTM-F2283 - Standard Specification for Shipboard Oil Pollution Abatement System
- ASTM-F2328 - Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
- ASTM-F2328M - Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)
- ASTM-F2329 - Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
- ASTM-F2332 - Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
- ASTM-F2361 - Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
- ASTM-F2362 - Standard Specification for Temperature Monitoring Equipment
- ASTM-F2363 - Standard Specification for Sewage and Graywater Flow Through Treatment Systems
- ASTM-F2403 - Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength (Withdrawn 2016)
- ASTM-F2430 - Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)
- ASTM-F2431 - Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
- ASTM-F2437 - Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
- ASTM-F2443 - Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End
- ASTM-F2444 - Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques
- ASTM-F2446 - Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange
- ASTM-F2482 - Standard Specification for Load-Indicating Externally Threaded Fasteners
- ASTM-F2488 - Standard Terminology for Rolling Element Bearings
- ASTM-F2489 - Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases
- ASTM-F2511 - Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
- ASTM-F2590 - Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type
- ASTM-F2591 - Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)
- ASTM-F2660 - Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
- ASTM-F2661 - Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
- ASTM-F2674 - Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners [Metric]
- ASTM-F2688 - Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers (Withdrawn 2019)
- ASTM-F2730 - Standard Specification for Silicon Nitride Cylindrical Bearing Rollers
- ASTM-F2798 - Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
- ASTM-F2832 - Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners
- ASTM-F2833 - Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
- ASTM-F2876 - Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications
- ASTM-F2877 - Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
- ASTM-F2882 - Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric)
- ASTM-F2882M - Standard Specification for Screws, Alloy Steel, Heat Treated, 1170 MPa Minimum Tensile Strength [Metric] (Withdrawn 2017)
- ASTM-F2934 - Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications
- ASTM-F2935 - Standard Specification for Chocks, Panama, Mooring Cast Steel
- ASTM-F2936 - Standard Specification for Chocks, Ship Mooring, Cast Steel
- ASTM-F2953 - Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages
- ASTM-F2991 - Standard Guide for Doubler Plate Repairs for Non-Classed Ship Structures (Withdrawn 2021)
- ASTM-F3019 - Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners
- ASTM-F3040 - Standard Test Method for Mechanical Static Load Testing of Non-Structural Marine Joiner Bulkheads
- ASTM-F3042 - Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws
- ASTM-F3043 - Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
- ASTM-F3052 - Standard Guide for Conducting Small Boat Stability Test (Deadweight Survey and Air Inclining Experiment) to Determine Lightcraft Weight and Centers of Gravity of a Small Craft
- ASTM-F3059 - Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding
- ASTM-F3111 - Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
- ASTM-F3125 - Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
- ASTM-F3131 - Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages
- ASTM-F3148 - Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
- ASTM-F3226 - Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems
- ASTM-F3256 - Standard Guide for Reporting and Recording of Near-Misses for Maritime Industry
- ASTM-F3257 - Standard Guide for Design, Construction, and Operation of Vessels Providing Accommodation Service to Offshore Installations
- ASTM-F3284 - Standard Guide for Recording and Reporting of Injuries and Illnesses for the Maritime Industry
- ASTM-F3285 - Standard Guide for Installation and Application of Type C Portable Tanks for Marine LNG Service
- ASTM-F3286 - Standard Guide for Cybersecurity and Cyberattack Mitigation
- ASTM-F3312 - Standard Practice for Liquefied Natural Gas (LNG) Bunkering Hose Transfer Assembly
- ASTM-F3319 - Standard Specification for Selection and Application of Field-Installed Cryogenic Pipe and Equipment Insulation Systems on Liquefied Natural Gas (LNG)-Fueled Ships
- ASTM-F3353 - Standard Guide for Shipboard Use of Lithium-Ion (Li-ion) Batteries
- ASTM-F3449 - Standard Guide for Inclusion of Cyber Risks into Maritime Safety Management Systems in Accordance with IMO Resolution MSC.428(98)―Cyber Risks and Challenges
- ASTM-F432 - Standard Specification for Roof and Rock Bolts and Accessories
- ASTM-F436 - Standard Specification for Hardened Steel Washers Inch and Metric Dimensions
- ASTM-F436M - Standard Specification for Hardened Steel Washers [Metric] (Withdrawn 2016)
- ASTM-F467 - Standard Specification for Nonferrous Nuts for General Use
- ASTM-F467M - Standard Specification for Nonferrous Nuts for General Use (Metric)
- ASTM-F468 - Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
- ASTM-F468M - Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
- ASTM-F541 - Standard Specification for Alloy Steel Eyebolts
- ASTM-F547 - Standard Terminology of Nails for Use with Wood and Wood-Base Materials
- ASTM-F568M - Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Withdrawn 2012)
- ASTM-F592 - Standard Terminology of Collated and Cohered Fasteners and Their Application Tools (Withdrawn 2017)
- ASTM-F593 - Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
- ASTM-F594 - Standard Specification for Stainless Steel Nuts
- ASTM-F606 - Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
- ASTM-F606M - Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) (Withdrawn 2015)
- ASTM-F680 - Standard Test Methods for Nails
- ASTM-F738M - Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs (Withdrawn 2015)
- ASTM-F788 - Standard Practice for Radiographic Examination Using Digital Detector Arrays
- ASTM-F812 - Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
- ASTM-F835 - Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
- ASTM-F835M - Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
- ASTM-F836M - Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric)
- ASTM-F837 - Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
- ASTM-F837M - Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
- ASTM-F844 - Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
- ASTM-F871M - Specification for Electrodeposited Coatings on Threaded Components [Metric] (Withdrawn 2001)
- ASTM-F879 - Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
- ASTM-F879M - Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
- ASTM-F880 - Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws
- ASTM-F880M - Standard Specification for Stainless Steel Socket Set Screws (Metric)
- ASTM-F901 - Standard Specification for Aluminum Transmission Tower Bolts and Nuts
- ASTM-F912 - Standard Specification for Alloy Steel Socket Set Screws
- ASTM-F912M - Standard Specification for Alloy Steel Socket Set Screws (Metric)
- ASTM-F959 - Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series
- ASTM-F959M - Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners (Metric) (Withdrawn 2016)