03.03: Nondestructive Testing
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-C1331 - Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
- ASTM-C1332 - Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
- ASTM-E1000 - Standard Guide for Radioscopy
- ASTM-E1001 - Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
- ASTM-E1002 - Standard Practice for Leaks Using Ultrasonics
- ASTM-E1003 - Standard Practice for Hydrostatic Leak Testing
- ASTM-E1004 - Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
- ASTM-E1025 - Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography
- ASTM-E1030 - Standard Practice for Radiographic Examination of Metallic Castings
- ASTM-E1032 - Standard Practice for Radiographic Examination of Weldments Using Industrial X-Ray Film
- ASTM-E1033 - Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature (Withdrawn 2019)
- ASTM-E1065 - Standard Guide for Evaluating Characteristics of Ultrasonic Search Units
- ASTM-E1066 - Standard Practice for Ammonia Colorimetric LeakTesting
- ASTM-E1067 - Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
- ASTM-E1079 - Standard Practice for Calibration of Transmission Densitometers
- ASTM-E1106 - Standard Test Method for Primary Calibration of Acoustic Emission Sensors
- ASTM-E1114 - Standard Test Method for Determining the Size of Iridium-192, Cobalt-60, and Selenium-75 Industrial Radiographic Sources
- ASTM-E1118 - Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
- ASTM-E1135 - Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
- ASTM-E1139 - Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries
- ASTM-E114 - Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
- ASTM-E1158 - Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material (Withdrawn 2019)
- ASTM-E1161 - Standard Practice for Radiographic Examination of Semiconductors and Electronic Components
- ASTM-E1165 - Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
- ASTM-E1208 - Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process
- ASTM-E1209 - Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process
- ASTM-E1210 - Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process
- ASTM-E1211 - Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
- ASTM-E1212 - Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies
- ASTM-E1213 - Standard Practice for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
- ASTM-E1219 - Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
- ASTM-E1220 - Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process
- ASTM-E125 - Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
- ASTM-E1254 - Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films
- ASTM-E1255 - Standard Practice for Radioscopy
- ASTM-E127 - Standard Practice for Fabrication and Control of Aluminum Alloy Ultrasonic Standard Reference Blocks
- ASTM-E1311 - Standard Practice for Minimum Detectable Temperature Difference for Thermal Imaging Systems
- ASTM-E1312 - Standard Practice for Electromagnetic (Eddy Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature
- ASTM-E1315 - Standard Practice for Ultrasonic Examination of Steel with Convex Cylindrically Curved Entry Surfaces
- ASTM-E1316 - Standard Terminology for Nondestructive Examinations
- ASTM-E1320 - Standard Reference Radiographs for Titanium Castings
- ASTM-E1324 - Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
- ASTM-E1359 - Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies
- ASTM-E1390 - Standard Specification for Illuminators Used for Viewing Industrial Radiographs
- ASTM-E1411 - Standard Practice for Qualification of Radioscopic Systems
- ASTM-E1416 - Standard Practice for Radioscopic Examination of Weldments
- ASTM-E1417 - Standard Practice for Liquid Penetrant Testing
- ASTM-E1418 - Standard Practice for Visible Penetrant Testing Using the Water-Washable Process
- ASTM-E1419 - Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission
- ASTM-E142 - Method for Controlling Quality of Radiographic Testing (Withdrawn 2000)
- ASTM-E1441 - Standard Guide for Computed Tomography (CT)
- ASTM-E1444 - Standard Practice for Magnetic Particle Testing
- ASTM-E1453 - Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data
- ASTM-E1454 - Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data (Withdrawn 2013)
- ASTM-E1475 - Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data
- ASTM-E1476 - Standard Guide for Metals Identification, Grade Verification, and Sorting
- ASTM-E1495 - Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints
- ASTM-E1496 - Standard Test Method for Neutron Radiographic Dimensional Measurements (Withdrawn 2012)
- ASTM-E1543 - Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems
- ASTM-E155 - Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
- ASTM-E1570 - Standard Practice for Computed Tomographic (CT) Examination
- ASTM-E1571 - Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope
- ASTM-E1603 - Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
- ASTM-E1606 - Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes
- ASTM-E1629 - Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
- ASTM-E164 - Standard Practice for Contact Ultrasonic Testing of Weldments
- ASTM-E1647 - Standard Practice for Determining Contrast Sensitivity in Radiology
- ASTM-E1648 - Standard Reference Radiographs for Examination of Aluminum Fusion Welds
- ASTM-E165 - Standard Practice for Liquid Penetrant Testing for General Industry
- ASTM-E1672 - Standard Guide for Computed Tomography (CT) System Selection
- ASTM-E1695 - Standard Test Method for Measurement of Computed Tomography (CT) System Performance
- ASTM-E1734 - Standard Practice for Radioscopic Examination of Castings
- ASTM-E1735 - Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems from 4 to 25 MeV
- ASTM-E1736 - Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels
- ASTM-E1742 - Standard Practice for Radiographic Examination
- ASTM-E1774 - Standard Guide for Electromagnetic Acoustic Transducers (EMATs)
- ASTM-E1781 - Standard Practice for Secondary Calibration of Acoustic Emission Sensors
- ASTM-E1814 - Standard Practice for Computed Tomographic (CT) Examination of Castings
- ASTM-E1815 - Standard Test Method for Classification of Film Systems for Industrial Radiography
- ASTM-E1816 - Standard Practice for Measuring thickness by Pulse-Echo Electromagnetic Acoustic Transducer (EMAT) Methods
- ASTM-E1817 - Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)
- ASTM-E186 - Standard Reference Radiographs for Heavy-Walled (2 to 4
1 2 - ASTM-E1862 - Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
- ASTM-E1888 - Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
- ASTM-E1897 - Standard Practice for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers
- ASTM-E1901 - Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods
- ASTM-E192 - Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications
- ASTM-E1930 - Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission
- ASTM-E1931 - Standard Guide for Non-computed X-Ray Compton Scatter Tomography
- ASTM-E1932 - Standard Guide for Acoustic Emission Examination of Small Parts
- ASTM-E1933 - Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
- ASTM-E1934 - Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
- ASTM-E1935 - Standard Test Method for Calibrating and Measuring CT Density
- ASTM-E1936 - Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems
- ASTM-E1955 - Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM
Reference Radiographs - ASTM-E1961 - Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units
- ASTM-E1962 - Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
- ASTM-E2001 - Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts
- ASTM-E2002 - Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy
- ASTM-E2003 - Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators
- ASTM-E2007 - Standard Guide for Computed Radiography
- ASTM-E2023 - Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators
- ASTM-E2024 - Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
- ASTM-E2033 - Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method)
- ASTM-E2075 - Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod
- ASTM-E2076 - Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission
- ASTM-E2096 - Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
- ASTM-E2104 - Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components
- ASTM-E213 - Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
- ASTM-E214 - Standard Practice for Immersed Ultrasonic Testing by the Reflection Method Using Pulsed Longitudinal Waves (Withdrawn 2007)
- ASTM-E215 - Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube
- ASTM-E2191 - Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission
- ASTM-E2192 - Standard Guide for Planar Flaw Height Sizing by Ultrasonics
- ASTM-E2223 - Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics
- ASTM-E2261 - Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique
- ASTM-E2297 - Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
- ASTM-E2337 - Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing (Withdrawn 2020)
- ASTM-E2338 - Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards
- ASTM-E2339 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
- ASTM-E2373 - Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
- ASTM-E2374 - Standard Guide for Acoustic Emission System Performance Verification
- ASTM-E2375 - Standard Practice for Ultrasonic Testing of Wrought Products
- ASTM-E242 - Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters are Changed
- ASTM-E2422 - Standard Digital Reference Images for Inspection of Aluminum Castings
- ASTM-E243 - Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes
- ASTM-E2445 - Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems
- ASTM-E2446 - Standard Practice for Manufacturing Characterization of Computed Radiography Systems
- ASTM-E2478 - Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission
- ASTM-E2479 - Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L
CR ) Waves - ASTM-E2491 - Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
- ASTM-E2533 - Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications
- ASTM-E2534 - Standard Practice for Targeted Defect Detection Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
- ASTM-E2580 - Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
- ASTM-E2581 - Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications
- ASTM-E2582 - Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
- ASTM-E2597 - Standard Practice for Manufacturing Characterization of Digital Detector Arrays
- ASTM-E2598 - Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers
- ASTM-E2660 - Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications
- ASTM-E2661 - Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications
- ASTM-E2662 - Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
- ASTM-E2663 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods
- ASTM-E2669 - Standard Digital Reference Images for Titanium Castings
- ASTM-E268 - Definitions of Terms Relating to Electromagnetic Testing (Withdrawn 1991)
- ASTM-E2698 - Standard Guide for Forensic Examination of Fabrics and Cordage
- ASTM-E2699 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods
- ASTM-E270 - Definitions of Terms Relating to Liquid Penetrant Inspection (Withdrawn 1991)
- ASTM-E2700 - Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
- ASTM-E272 - Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
- ASTM-E273 - Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
- ASTM-E2736 - Standard Guide for Digital Detector Array Radiography
- ASTM-E2737 - Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability
- ASTM-E2738 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods
- ASTM-E2767 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods
- ASTM-E2775 - Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction
- ASTM-E280 - Standard Reference Radiographs for Heavy-Walled (4
1 2 - ASTM-E2861 - Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams
- ASTM-E2862 - Standard Practice for Probability of Detection Analysis for Hit/Miss Data
- ASTM-E2863 - Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization
- ASTM-E2868 - Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness
- ASTM-E2869 - Standard Digital Reference Images for Magnesium Castings
- ASTM-E2884 - Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays
- ASTM-E2903 - Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes
- ASTM-E2904 - Standard Practice for Characterization and Verification of Linear Phased Array Ultrasonic Probes
- ASTM-E2905 - Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods
- ASTM-E2906 - Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles
- ASTM-E2907 - Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing
- ASTM-E2928 - Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique
- ASTM-E2929 - Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction
- ASTM-E2930 - Standard Practice for Pressure Decay Leak Test Method
- ASTM-E2934 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods
- ASTM-E2971 - Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
- ASTM-E2973 - Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die Castings
- ASTM-E2981 - Standard Guide for Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications
- ASTM-E2982 - Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications
- ASTM-E2983 - Standard Guide for Application of Acoustic Emission for Structural Health Monitoring
- ASTM-E2984 - Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization
- ASTM-E2985 - Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy
- ASTM-E3022 - Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
- ASTM-E3023 - Standard Practice for Probability of Detection Analysis for
รข Versusa Data - ASTM-E3024 - Standard Practice for Magnetic Particle Testing for General Industry
- ASTM-E3044 - Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints
- ASTM-E3045 - Standard Practice for Crack Detection Using Vibroacoustic Thermography
- ASTM-E3052 - Standard Practice for Examination of Carbon Steel Welds Using An Eddy Current Array
- ASTM-E309 - Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
- ASTM-E310 - Standard Reference Radiographs for Tin Bronze Castings
- ASTM-E317 - Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments
- ASTM-E376 - Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
- ASTM-E390 - Standard Reference Radiographs for Steel Fusion Welds
- ASTM-E425 - Definitions of Terms Related to Leak Testing (Withdrawn 1991)
- ASTM-E426 - Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys
- ASTM-E427 - Standard Practice for Testing for Leaks Using the Halogen Leak Detector(Alkali-Ion Diode) (Withdrawn 2013)
- ASTM-E428 - Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing (Withdrawn 2019)
- ASTM-E431 - Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices
- ASTM-E432 - Standard Guide for Selection of a Leak Testing Method
- ASTM-E433 - Standard Reference Photographs for Liquid Penetrant Inspection
- ASTM-E446 - Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
- ASTM-E479 - Standard Guide for Preparation of a Leak Testing Specification (Withdrawn 2014)
- ASTM-E493 - Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
- ASTM-E494 - Standard Practice for Measuring Ultrasonic Velocity in Materials
- ASTM-E498 - Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
- ASTM-E499 - Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
- ASTM-E500 - Definitions of Terms Relating to Ultrasonic Testing (Withdrawn 1991)
- ASTM-E505 - Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
- ASTM-E515 - Standard Practice for Leaks Using Bubble Emission Techniques
- ASTM-E543 - Standard Specification for Agencies Performing Nondestructive Testing
- ASTM-E545 - Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
- ASTM-E566 - Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals
- ASTM-E569 - Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
- ASTM-E570 - Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
- ASTM-E571 - Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
- ASTM-E586 - Definitions of Terms Relating to Gamma and X Radiography (Withdrawn 1991)
- ASTM-E587 - Standard Practice for Ultrasonic Angle-Beam Contact Testing
- ASTM-E592 - Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates
1 4 Cobalt-60 - ASTM-E650 - Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors
- ASTM-E664 - Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method
- ASTM-E689 - Standard Reference Radiographs for Ductile Iron Castings
- ASTM-E690 - Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes
- ASTM-E703 - Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals
- ASTM-E709 - Standard Guide for Magnetic Particle Testing
- ASTM-E746 - Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
- ASTM-E747 - Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology
- ASTM-E748 - Standard Guide for Thermal Neutron Radiography of Materials
- ASTM-E749 - Standard Practice for Acoustic Emission Monitoring During Continuous Welding
- ASTM-E750 - Standard Practice for Characterizing Acoustic Emission Instrumentation
- ASTM-E751 - Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
- ASTM-E797 - Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
- ASTM-E801 - Standard Practice for Controlling Quality of Radiographic Examination of Electronic Devices
- ASTM-E802 - Standard Reference Radiographs for Gray Iron Castings Up to 4
1 2 - ASTM-E803 - Standard Test Method for Determining the
L/D Ratio of Neutron Radiography Beams - ASTM-E804 - Practice for Calibration of the Ultrasonic Test System by Extrapolation Between Flat Bottom Hole Sizes (Withdrawn 1994)
- ASTM-E908 - Standard Practice for Calibrating Gaseous Reference Leaks
- ASTM-E94 - Standard Guide for Radiographic Examination Using Industrial Radiographic Film
- ASTM-E976 - Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response
- ASTM-E977 - Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
- ASTM-E999 - Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing