Document Center is acquired by Nimonik

04.08: Soil and Rock (I): D420 - D5876

ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.

Return to Section Index

The following documents are a part of this series:

• ASTM-D1140 - Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
• ASTM-D1143 - Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
• ASTM-D1194 - Standard Test Method for Bearing Capacity of Soil for Static Load and Spread Footings (Withdrawn 2003)
• ASTM-D1241 - Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses (Withdrawn 2024)
• ASTM-D1411 - Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes (Withdrawn 2018)
• ASTM-D1452 - Standard Practice for Soil Exploration and Sampling by Auger Borings
• ASTM-D1556 - Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method (Withdrawn 2024)
• ASTM-D1557 - Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³ (2,700 kN-m/m³))
• ASTM-D1558 - Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils (Withdrawn 2019)
• ASTM-D1586 - Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
• ASTM-D1587 - Standard Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes (Withdrawn 2024)
• ASTM-D1632 - Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
• ASTM-D1633 - Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
• ASTM-D1634 - Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
• ASTM-D1635 - Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
• ASTM-D1883 - Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
• ASTM-D1997 - Standard Test Method for Laboratory Determination of the Fiber Content of Peat and Organic Soils by Dry Mass
• ASTM-D2049 - Test Method for Relative Density of Cohesionless Soils
• ASTM-D2113 - Standard Practice for Rock Core Drilling and Sampling of Rock for Site Exploration (Withdrawn 2023)
• ASTM-D2166 - Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
• ASTM-D2167 - Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method (Withdrawn 2024)
• ASTM-D2168 - Standard Practices for Calibration of Laboratory Mechanical-Rammer Soil Compactors
• ASTM-D2216 - Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
• ASTM-D2217 - Standard Practice for Wet Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants (Withdrawn 2007)
• ASTM-D2325 - Standard Test Method for Capillary-Moisture Relationships for Coarse- and Medium-Textured Soils by Porous-Plate Apparatus (Withdrawn 2007)
• ASTM-D2434 - Standard Test Methods for Measurement of Hydraulic Conductivity of Coarse-Grained Soils
• ASTM-D2435 - Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
• ASTM-D2487 - Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
• ASTM-D2488 - Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)
• ASTM-D2573 - Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils
• ASTM-D2607 - Classification of Peats, Mosses, Humus, and Related Products (Withdrawn 1990)
• ASTM-D2664 - Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements (Withdrawn 2005)
• ASTM-D2844 - Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
• ASTM-D2845 - Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock (Withdrawn 2017)
• ASTM-D2850 - Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
• ASTM-D2901 - Standard Test Method for Cement Content of Freshly Mixed Soil-Cement (Withdrawn 2006)
• ASTM-D2922 - Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
• ASTM-D2936 - Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
• ASTM-D2937 - Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
• ASTM-D2938 - Standard Test Method for Unconfined Compressive Strength of Intact Rock Core Specimens (Withdrawn 2005)
• ASTM-D2944 - Standard Practice of Sampling Processed Peat Materials for Horticultural Purposes
• ASTM-D2973 - Standard Test Method for Total Nitrogen in Peat Materials
• ASTM-D2974 - Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils
• ASTM-D2976 - Standard Test Method for pH of Peat Materials
• ASTM-D2977 - Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
• ASTM-D2978 - Standard Test Method for Volume of Peat and Peat-Based Growing Media
• ASTM-D2980 - Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials
• ASTM-D3017 - Standard Test Method for Water Content of Soil and Rock in Place by Nuclear Methods (Shallow Depth) (Witthdrawn 2007)
• ASTM-D3080 - Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions (Withdrawn 2020)
• ASTM-D3148 - Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression (Withdrawn 2005)
• ASTM-D3152 - Standard Test Method for Capillary-Moisture Relationships for Fine-Textured Soils by Pressure-Membrane Apparatus (Withdrawn 2007)
• ASTM-D3155 - Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures (Withdrawn 2020)
• ASTM-D3213 - Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil
• ASTM-D3282 - Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
• ASTM-D3385 - Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
• ASTM-D3404 - Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers (Withdrawn 2024)
• ASTM-D3441 - Standard Test Method for Mechanical Cone Penetration Testing of Soils
• ASTM-D3550 - Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
• ASTM-D3551 - Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
• ASTM-D3584 - Practice for Indexing Papers and Reports on Soil and Rock for Engineering Purposes (Withdrawn 1996)
• ASTM-D3689 - Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
• ASTM-D3740 - Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
• ASTM-D3877 - Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures (Withdrawn 2017)
• ASTM-D3966 - Standard Test Methods for Deep Foundations Under Lateral Load
• ASTM-D3967 - Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens with Flat Loading Platens
• ASTM-D3999 - Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus (Withdrawn 2020)
• ASTM-D4015 - Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices
• ASTM-D4016 - Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method) (Withdrawn 2023)
• ASTM-D4043 - Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
• ASTM-D4044 - Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers (Withdrawn 2024)
• ASTM-D4050 - Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems
• ASTM-D4083 - Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)
• ASTM-D4104 - Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
• ASTM-D4105 - Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
• ASTM-D4106 - Standard Practice for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
• ASTM-D4186 - Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
• ASTM-D420 - Standard Guide for Site Characterization for Engineering Design and Construction Purposes
• ASTM-D421 - Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants (Withdrawn 2016)
• ASTM-D4219 - Standard Test Method for Short-Term Unconfined Compressive Strength Index of Chemically Grouted Soils
• ASTM-D422 - Standard Test Method for Particle-Size Analysis of Soils (Withdrawn 2016)
• ASTM-D4220 - Standard Practices for Preserving and Transporting Soil Samples (Withdrawn 2023)
• ASTM-D4221 - Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
• ASTM-D4223 - Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
• ASTM-D425 - Standard Test Method for Centrifuge Moisture Equivalent of Soils
• ASTM-D4253 - Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
• ASTM-D4254 - Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
• ASTM-D427 - Test Method for Shrinkage Factors of Soils by the Mercury Method (Withdrawn 2008)
• ASTM-D4318 - Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
• ASTM-D4319 - Standard Test Method for Distribution Ratios by the Short-Term Batch Method (Withdrawn 2007)
• ASTM-D4320 - Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Engineering Parameters (Withdrawn 2018)
• ASTM-D4341 - Standard Test Method for Creep of Cylindrical Hard Rock Core Specimens in Uniaxial Compression (Withdrawn 2005)
• ASTM-D4373 - Standard Test Method for Rapid Determination of Carbonate Content of Soils
• ASTM-D4380 - Standard Test Method for Determining Density of Construction Slurries
• ASTM-D4381 - Standard Test Method for Sand Content by Volume of Bentonitic Slurries (Withdrawn 2021)
• ASTM-D4394 - Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method
• ASTM-D4395 - Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method
• ASTM-D4403 - Standard Practice for Extensometers Used in Rock
• ASTM-D4404 - Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
• ASTM-D4405 - Standard Test Method for Creep of Cylindrical Soft Rock Core Specimens in Uniaxial Compressions (Withdrawn 2005)
• ASTM-D4406 - Standard Test Method for Creep of Cylindrical Rock Core Specimens in Triaxial Compression (Withdrawn 2005)
• ASTM-D4427 - Standard Classification of Peat Samples by Laboratory Testing
• ASTM-D4428 - Standard Test Methods for Crosshole Seismic Testing (Withdrawn 2023)
• ASTM-D4429 - Standard Test Method for CBR (California Bearing Ratio) of Soils in Place (Withdrawn 2018)
• ASTM-D4435 - Standard Test Method for Rock Bolt Anchor Pull Test (Withdrawn 2022)
• ASTM-D4436 - Standard Test Method for Rock Bolt Long-Term Load Retention Test (Withdrawn 2022)
• ASTM-D4452 - Standard Practice for X-Ray Radiography of Soil Samples
• ASTM-D4506 - Standard Test Method for Determining In Situ Modulus of Deformation of a Rock Mass Using the Radial Jacking Test
• ASTM-D4511 - Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
• ASTM-D4525 - Standard Test Method for Permeability of Rocks by Flowing Air (Withdrawn 2022)
• ASTM-D4531 - Standard Test Methods for Bulk and Dry Density of Peat and Peat Products
• ASTM-D4535 - Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
• ASTM-D4542 - Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
• ASTM-D4543 - Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
• ASTM-D4544 - Standard Practice for Estimating Peat Deposit Thickness
• ASTM-D4546 - Standard Test Methods for One-Dimensional Swell or Collapse of Soils
• ASTM-D4553 - Standard Test Method for Determining In Situ Creep Characteristics of Rock
• ASTM-D4554 - Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities (Withdrawn 2021)
• ASTM-D4555 - Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test (Withdrawn 2019)
• ASTM-D4564 - Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method (Withdrawn 2013)
• ASTM-D4609 - Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization (Withdrawn 2017)
• ASTM-D4611 - Standard Test Method for Specific Heat of Rock and Soil
• ASTM-D4612 - Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil
• ASTM-D4622 - Standard Test Method for Rock Mass Monitoring Using Inclinometers (Withdrawn 2000)
• ASTM-D4623 - Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge
• ASTM-D4630 - Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
• ASTM-D4631 - Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
• ASTM-D4633 - Standard Test Method for Energy Measurement for Dynamic Penetrometers
• ASTM-D4643 - Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
• ASTM-D4644 - Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks
• ASTM-D4645 - Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method (Withdrawn 2017)
• ASTM-D4647 - Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
• ASTM-D4648 - Standard Test Methods for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
• ASTM-D4696 - Standard Guide for Pore-Liquid Sampling from the Vadose Zone
• ASTM-D4700 - Standard Guide for Soil Sampling from the Vadose Zone (Withdrawn 2024)
• ASTM-D4718 - Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
• ASTM-D4719 - Standard Test Methods for Prebored Pressuremeter Testing in Soils
• ASTM-D4729 - Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flat Jack Method
• ASTM-D4750 - Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well) (Withdrawn 2010)
• ASTM-D4753 - Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
• ASTM-D4767 - Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
• ASTM-D4829 - Standard Test Method for Expansion Index of Soils
• ASTM-D4832 - Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
• ASTM-D4879 - Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock (Withdrawn 2017)
• ASTM-D4914 - Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
• ASTM-D4943 - Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method
• ASTM-D4944 - Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
• ASTM-D4945 - Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
• ASTM-D4959 - Standard Test Method for Determination of Water Content of Soil By Direct Heating
• ASTM-D4971 - Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
• ASTM-D4972 - Standard Test Methods for pH of Soils
• ASTM-D4992 - Standard Practice for Evaluation of Rock to be Used for Erosion Control
• ASTM-D5030 - Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
• ASTM-D5079 - Standard Practices for Preserving and Transporting Rock Core Samples (Withdrawn 2017)
• ASTM-D5080 - Standard Test Method for Rapid Determination of Percent Compaction
• ASTM-D5084 - Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
• ASTM-D5088 - Standard Practice for Decontamination of Field Equipment Used at Waste Sites
• ASTM-D5092 - Standard Practice for Design and Installation of Groundwater Monitoring Wells
• ASTM-D5093 - Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring (Withdrawn 2024)
• ASTM-D5102 - Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures (Withdrawn 2018)
• ASTM-D5121 - Standard Practice for Preparation of Rock Slabs for Durability Testing
• ASTM-D5126 - Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
• ASTM-D5143 - Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography (Withdrawn 2023)
• ASTM-D5195 - Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
• ASTM-D5202 - Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils
• ASTM-D5220 - Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
• ASTM-D5239 - Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization (Withdrawn 2021)
• ASTM-D5240 - Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate
• ASTM-D5254 - Standard Practice for Minimum Set of Data Elements to Identify a Groundwater Site (Withdrawn 2019)
• ASTM-D5255 - Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock
• ASTM-D5268 - Standard Specification for Topsoil Used for Landscaping and Construction Purposes
• ASTM-D5269 - Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method (Withdrawn 2024)
• ASTM-D5270 - Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
• ASTM-D5298 - Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
• ASTM-D5299 - Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
• ASTM-D5311 - Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil (Withdrawn 2022)
• ASTM-D5312 - Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions
• ASTM-D5313 - Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions
• ASTM-D5314 - Standard Guide for Soil Gas Monitoring in the Vadose Zone (Withdrawn 2015)
• ASTM-D5333 - Standard Test Method for Measurement of Collapse Potential of Soils (Withdrawn 2012)
• ASTM-D5334 - Standard Test Method for Determination of Thermal Conductivity of Soil and Rock by Thermal Needle Probe Procedure
• ASTM-D5335 - Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges (Withdrawn 2023)
• ASTM-D5407 - Standard Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in Triaxial Compression Without Pore Pressure Measurement (Withdrawn 2005)
• ASTM-D5408 - Standard Guide for Set of Data Elements to Describe a Groundwater Site;
  Part OneAdditional Identification Descriptors (Withdrawn 2019)
• ASTM-D5409 - Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part TwoPhysical Descriptors (Withdrawn 2019)
• ASTM-D5410 - Standard Guide for Set of Data Elements to Describe a Groundwater Site;
  Part ThreeUsage Descriptors (Withdrawn 2016)
• ASTM-D5434 - Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock (Withdrawn 2021)
• ASTM-D5435 - Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection (Withdrawn 2019)
• ASTM-D5447 - Standard Guide for Application of a Numerical Groundwater Flow Model to a Site-Specific Problem
• ASTM-D5472 - Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
• ASTM-D5473 - Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer (Withdrawn 2015)
• ASTM-D5474 - Standard Guide for Selection of Data Elements for Groundwater Investigations (Withdrawn 2021)
• ASTM-D5490 - Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information (Withdrawn 2023)
• ASTM-D5518 - Standard Guide for Acquisition of File Aerial Photography and Imagery for Establishing Historic Site-Use and Surficial Conditions (Withdrawn 2003)
• ASTM-D5519 - Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials (Withdrawn 2024)
• ASTM-D5520 - Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
• ASTM-D5521 - Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers
• ASTM-D5522 - Standard Specification for Minimum Requirements for Laboratories Engaged in Chemical Analysis of Soil, Rock, and Contained Fluid (Withdrawn 2004)
• ASTM-D5539 - Standard Specification for Seed Starter Mix (Withdrawn 2019)
• ASTM-D5549 - Standard Guide for Contents of Geostatistical Site Investigation Report
• ASTM-D5550 - Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
• ASTM-D558 - Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
• ASTM-D559 - Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
• ASTM-D560 - Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
• ASTM-D5607 - Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
• ASTM-D5608 - Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites
• ASTM-D5609 - Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling
• ASTM-D5610 - Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling (Withdrawn 2023)
• ASTM-D5611 - Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application
• ASTM-D5714 - Standard Specification for Content of Digital Geospatial Metadata
• ASTM-D5715 - Standard Practice for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)
• ASTM-D5716 - Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
• ASTM-D5717 - Standard Guide for Design of Ground-Water Monitoring Systems in Karst and Fractured-Rock Aquifers (Withdrawn 2005)
• ASTM-D5718 - Standard Guide for Documenting a Groundwater Flow Model Application (Withdrawn 2022)
• ASTM-D5719 - Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes (Withdrawn 2022)
• ASTM-D5720 - Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes (Withdrawn 2018)
• ASTM-D5730 - Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Groundwater (Withdrawn 2013)
• ASTM-D5731 - Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
• ASTM-D5737 - Standard Guide for Methods for Measuring Well Discharge
• ASTM-D5738 - Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace ElementsDiagrams for Single Analyses (Withdrawn 2015)
• ASTM-D5745 - Standard Guide for Developing and Implementing Interim and Early Actions for Waste Contamination Site Remediation
• ASTM-D5753 - Standard Guide for Planning and Conducting Geotechnical Borehole Geophysical Logging
• ASTM-D5754 - Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace ElementsTrilinear Diagrams for Two or More Analyses (Withdrawn 2015)
• ASTM-D5777 - Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
• ASTM-D5778 - Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
• ASTM-D5779 - Standard Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control (Withdrawn 2023)
• ASTM-D5780 - Standard Test Methods for Individual Piles in Permafrost Under Static Axial Compressive Load
• ASTM-D5781 - Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices
• ASTM-D5782 - Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
• ASTM-D5783 - Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
• ASTM-D5784 - Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices
• ASTM-D5785 - Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
• ASTM-D5786 - Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems
• ASTM-D5787 - Standard Practice for Monitoring Well Protection At or Near Land Surface
• ASTM-D5850 - Standard Practice for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
• ASTM-D5852 - Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method (Withdrawn 2016)
• ASTM-D5855 - Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
• ASTM-D5856 - Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter (Withdrawn 2024)
• ASTM-D5872 - Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices
• ASTM-D5873 - Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method (Withdrawn 2023)
• ASTM-D5874 - Standard Test Methods for Determination of the Impact Value (IV) of a Soil
• ASTM-D5875 - Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices
• ASTM-D5876 - Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
• ASTM-D653 - Standard Terminology Relating to Soil, Rock, and Contained Fluids
• ASTM-D698 - Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft³ (600 kN-m/m³))
• ASTM-D806 - Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
• ASTM-D854 - Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023)