Document Center List of Standards on Chemical Reagents Including Reference Materials
ICS Code 71.040.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D1193 - Standard Specification for Reagent Water
- ASTM-D1493 - Standard Test Method for Solidification Point of Industrial Organic Chemicals (Withdrawn 2004)
- ASTM-D2854 - Standard Test Method for Apparent Density of Activated Carbon
- ASTM-D2866 - Standard Test Method for Total Ash Content of Activated Carbon
- ASTM-D2867 - Standard Test Methods for Moisture in Activated Carbon
- ASTM-D3466 - Standard Test Method for Ignition Temperature of Granular Activated Carbon
- ASTM-D3467 - Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon
- ASTM-D3610 - Standard Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
- ASTM-D3663 - Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
- ASTM-D3766 - Standard Terminology Relating to Catalysts and Catalysis
- ASTM-D3802 - Standard Test Method for Ball-Pan Hardness of Activated Carbon
- ASTM-D3803 - Standard Test Method for Nuclear-Grade Activated Carbon
- ASTM-D3838 - Standard Test Method for pH of Activated Carbon
- ASTM-D3907 - Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
- ASTM-D3908 - Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
- ASTM-D3922 - Practice for Estimating the Operating Performance of Granular Activated Carbon for Removal of Soluble Pollutants from Water (Withdrawn 1998)
- ASTM-D3943 - Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
- ASTM-D4058 - Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
- ASTM-D4069 - Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams
- ASTM-D4164 - Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
- ASTM-D4179 - Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
- ASTM-D4180 - Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
- ASTM-D4222 - Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
- ASTM-D4284 - Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
- ASTM-D4365 - Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
- ASTM-D4463 - Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
- ASTM-D4481 - Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
- ASTM-D4512 - Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM-D4567 - Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
- ASTM-D4607 - Standard Test Method for Determination of Iodine Number of Activated Carbon
- ASTM-D4641 - Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms
- ASTM-D4642 - Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
- ASTM-D4699 - Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
- ASTM-D4780 - Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
- ASTM-D4781 - Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM-D4782 - Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
- ASTM-D4824 - Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
- ASTM-D4926 - Standard Test Method for Gamma Alumina Content in Catalysts and Catalyst Carriers Containing Silica and Alumina by X-ray Powder Diffraction
- ASTM-D4937 - Standard Test Method for
p -Phenylenediamine Antidegradants Purity by Gas Chromatography - ASTM-D5020 - Test Method for Chlorofluorocarbon Activity of Activated Carbon (Withdrawn 1994)
- ASTM-D5029 - Standard Test Method for Water Solubles in Activated Carbon
- ASTM-D5153 - Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption Spectrophotometry
- ASTM-D5154 - Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
- ASTM-D5158 - Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
- ASTM-D5159 - Standard Guide for Dusting Attrition of Granular Activated Carbon
- ASTM-D5160 - Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon
- ASTM-D5228 - Standard Test Method for Determination of Butane Working Capacity of Activated Carbon
- ASTM-D5357 - Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
- ASTM-D5542 - Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
- ASTM-D5742 - Standard Test Method for Determination of Butane Activity of Activated Carbon
- ASTM-D5757 - Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets
- ASTM-D6586 - Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests
- ASTM-D6646 - Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
- ASTM-D6761 - Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM-D6851 - Standard Test Method for Determination of Contact pH with Activated Carbon
- ASTM-D7206 - Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
- ASTM-D7964 - Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
- ASTM-D8176 - Standard Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh)
- ASTM-E1305 - See: ASTM-E1452
- ASTM-E1330 - Practice for Preparation of Calibration Solutions for Spectrophotometric and for Spectroscopic Atomic Analyses (Withdrawn 1993)
- ASTM-E200 - Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
- ASTM-E2036 - Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
- ASTM-E2037 - Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
- ASTM-E2106 - Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
- ASTM-F1170 - Standard Practice for Determining the Performance of a Filter Medium Using Water and Siliceous Particles (Withdrawn 2002)
- ASTM-F1215 - Test Method for Determining the Initial Efficiency of a Flatsheet Filter Medium in an Airflow Using Latex Spheres (Withdrawn 1998)
- ASTM-F1368 - Test Method for Determining the Sieving Performance of a Fluid Filter Medium Employing an Aqueous Suspension of Microspheres and a Spectrophotometer (Withdrawn 2001)
- ASTM-F716 - Standard Test Methods for Sorbent Performance of Absorbents for Use on Chemical and Light Hydrocarbon Spills
- ASTM-F726 - Standard Test Method for Sorbent Performance of Adsorbents for use on Crude Oil and Related Spills
- ASTM-F778 - Standard Methods for Gas Flow Resistance Testing of Filtration Media
- ASTM-F795 - Standard Practice for Determining the Performance of a Filter Medium Employing a Single-Pass, Constant-Rate, Liquid Test (Withdrawn 2002)
- ASTM-F796 - Standard Practice for Determining The Performance of a Filter Medium Employing a Single-Pass, Constant-Pressure, Liquid Test (Withdrawn 2002)
- ASTM-F797 - Standard Practice for Determining the Performance of a Filter Medium Employing a Multipass, Constant-Rate, Liquid Test (Withdrawn 2002)
BSI:
- BS-1647-2 - pH measurement
- BS-6376-1 - Reagents for chemical analysis
- BS-6376-2 - Reagents for chemical analysis
- BS-EN-ISO-19340 - Water quality. Determination of dissolved perchlorate. Method using ion chromatography (IC)
- BS-EN-ISO-3696 - Water for analytical laboratory use. Specification and test methods
- BS-ISO-14595 - Microbeam analysis. Electron probe microanalysis. Guidelines for the specification of certified reference materials (CRMs)
- PD-CEN-10317 - European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products
- PD-IEC-62456 - An electrochemical reference system for use in different solvent media. The decamethylated ferricinium/ferrocene redox couple
- PD-ISO-11773 - Global distribution of reference materials
- PD-ISO-16268 - Surface chemical analysis. Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation
- PD-ISO-16476 - Reference materials. Establishing and expressing metrological traceability of quantity values assigned to reference materials
- PD-ISO-79 - Reference materials. Examples of reference materials for qualitative properties
- PD-ISO-GUIDE-30-TC - Tracked Changes. Reference materials. Selected terms and definitions
- PD-ISO-GUIDE-31 - Reference materials. Contents of certificates, labels and accompanying documentation
- PD-ISO-GUIDE-33 - Reference materials. Good practice in using reference materials
- PD-ISO-GUIDE 34 - General requirements for the competence of reference material producers
- PD-ISO-GUIDE-35 - Reference materials. Guidance for characterization and assessment of homogeneity and stability
ISO:
- ISO-10989 - Reference materials - Guidance on, and keywords used for, RM categorization
- ISO-11773 - Global distribution of reference materials
- ISO-14595 - Microbeam analysis - Electron probe microanalysis - Guidelines for the specification of certified reference materials (CRMs)
- ISO-16268 - Surface chemical analysis - Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation
- ISO-16476 - Reference materials - Establishing and expressing metrological traceability of quantity values assigned to reference materials
- ISO-3696 - Water for analytical laboratory use -- Specification and test methods
- ISO-6353-1 - Reagents for chemical analysis -- Part 1 : General test methods
- ISO-6353-2 - Reagents for chemical analysis -- Part 2 : Specifications -- First series
- ISO-6353-2/2 - Addendum 2 to ISO 6353-2:1983
- ISO-6353-3 - Reagents for chemical analysis -- Part 3 : Specifications -- Second series
- ISO-79 - Reference materials - Examples of reference materials for qualitative properties
- ISO-GUIDE 30 - Reference materials - Selected terms and definitions
- ISO-GUIDE 30/AM 1 - iso guide 30 - Amendment 1: Revision of definitions for reference material and certified reference material
- ISO-GUIDE 31 - Reference materials - Contents of certificates, labels and accompanying documentation
- ISO-GUIDE 32 - Calibration in analytical chemistry and use of certified reference materials
- ISO-GUIDE 33 - Reference materials - Good practice in using reference materials
- ISO-GUIDE 34 - General requirements for the competence of reference material producers
- ISO-GUIDE 35 - Reference materials - Guidance for characterization and assessment of homogeneity and stability
- ISO-GUIDE 80 - Guidance for the in-house preparation of quality control materials (QCMs)
Other SDOs:
- JIS-K-0225 - Testing methods for determination of trace components in diluent gas and zero gas
- JIS-K-8576 - Sodium hydroxide
- JIS-K-8637 - Sodium thiosulfate pentahydrate
- JIS-K-8659 - Starch, soluble (Reagent)
- JIS-K-8741 - Sulfuric acid, fuming
- JIS-K-8872 - Formaldehyde solution (Reagent)
- JIS-K-8913 - Potassium iodide
- JIS-K-8920 - Iodine (Reagent)
- SIS-CEN/TR-10317 - European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products
- SIS-CEN/TR-10350 - Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analythical method by using Certified Reference Materials
- SIS-CEN/TR-10353 - Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
- SIS-CEN/TR-10354 - Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
- SIS-ISO-GUIDE-31 - Reference materials - Contents of certificates and accompanying documentation (ISO GUIDE 31, IDT)
- SS-EN-ISO-3696 - Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
- UNE-ISO-11773 - Global distribution of reference materials