01.01: Steel--Piping, Tubing, Fittings
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-A1005 - Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded (Withdrawn 2014)
- ASTM-A1006 - Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded (Withdrawn 2014)
- ASTM-A1012 - Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
- ASTM-A1014 - Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
- ASTM-A1015 - Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
- ASTM-A1016 - Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
- ASTM-A1020 - Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications (Withdrawn 2017)
- ASTM-A1024 - Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
- ASTM-A1037 - Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded (Withdrawn 2017)
- ASTM-A1047 - Standard Test Method for Pneumatic Leak Testing of Tubing
- ASTM-A105 - Standard Specification for Carbon Steel Forgings for Piping Applications
- ASTM-A1053 - Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
- ASTM-A1058 - Standard Test Methods for Mechanical Testing of Steel Products—Metric
- ASTM-A106 - Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
- ASTM-A1065 - Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
- ASTM-A1076 - Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
- ASTM-A1082 - Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
- ASTM-A1085 - Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
- ASTM-A1097 - Standard Specification for Steel Casing Pipe, Electric-Fusion (Arc)-Welded (Outside Diameter of 10 in. and Larger)
- ASTM-A1098 - Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)
- ASTM-A1099 - Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels
- ASTM-A1100 - Standard Guide for Qualification and Control of Induction Heat Treating
- ASTM-A1103 - Standard Specification for Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications
- ASTM-A1110 - Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes with 52 KSI [360 MPa] Minimum Yield Strength and Impact Requirements
- ASTM-A1112 - Standard Specification for Cold-Formed Welded High Strength Carbon Steel or High-Strength Low-Alloy Steel Hollow Structural Sections (HSS) in Rounds and Shapes
- ASTM-A1119 - Standard Specification for Welded Partially Corrugated Tube for Potable Water and General Service
- ASTM-A120 - Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless for Ordinary Uses (Withdrawn 1987)
- ASTM-A134 - Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
- ASTM-A135 - Standard Specification for Electric-Resistance-Welded Steel Pipe
- ASTM-A139 - Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
- ASTM-A178 - Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
- ASTM-A179 - Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
- ASTM-A181 - Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
- ASTM-A182 - Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
- ASTM-A192 - Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
- ASTM-A193 - Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
- ASTM-A194 - Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
- ASTM-A199 - Specification for Seamless Cold-Drawn Intermediate Alloy-Steel Heat-Exchanger and Condenser Tubes (Withdrawn 1995)
- ASTM-A200 - Specification for Seamless Intermediate Alloy-Steel Still Tubes for Refinery Service (Withdrawn 1999)
- ASTM-A209 - Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
- ASTM-A210 - Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
- ASTM-A213 - Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
- ASTM-A214 - Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
- ASTM-A226 - Specification for Electric-Resistance-Welded Carbon Steel Boiler Superheater Tubes for High-Pressure Service (Withdrawn 1997)
- ASTM-A234 - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
- ASTM-A249 - Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
- ASTM-A250 - Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes (Withdrawn 2017)
- ASTM-A252 - Standard Specification for Welded and Seamless Steel Pipe Piles
- ASTM-A254 - Standard Specification for Copper-Brazed Steel Tubing
- ASTM-A268 - Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
- ASTM-A269 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
- ASTM-A270 - Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
- ASTM-A271 - Standard Specification for Seamless Austenitic Chromium-Nickel Steel Still Tubes for Refinery Service (Withdrawn 1999)
- ASTM-A312 - Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
- ASTM-A320 - Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
- ASTM-A333 - Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
- ASTM-A334 - Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
- ASTM-A335 - Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
- ASTM-A350 - Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM-A358 - Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
- ASTM-A369 - Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
- ASTM-A370 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
- ASTM-A376 - Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
- ASTM-A381 - Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems
- ASTM-A403 - Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
- ASTM-A405 - Specification for Seamless Ferritic Alloy-Steel Pipe Specially Heat Treated for High-Temperature Service (Withdrawn 1995)
- ASTM-A409 - Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
- ASTM-A420 - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
- ASTM-A422 - Specification for Butt Welds in Still Tubes for Refinery Service (Withdrawn 1994)
- ASTM-A423 - Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
- ASTM-A426 - Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
- ASTM-A430 - Specification for Austentic Steel Forged and Bored Pipe for Hi GH-Temperature Service (Withdrawn 1995)
- ASTM-A437 - Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
- ASTM-A450 - Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
- ASTM-A451 - Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
- ASTM-A452 - Specification for Centrifugally Cast Austenitic Steel Cold-Wrought Pipe for High-Temperature Service (Withdrawn 1995)
- ASTM-A453 - Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
- ASTM-A498 - Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
- ASTM-A500 - Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
- ASTM-A501 - Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
- ASTM-A511 - Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
- ASTM-A512 - Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
- ASTM-A513 - Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
- ASTM-A519 - Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
- ASTM-A520 - Standard Specification for Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction (Withdrawn 2000)
- ASTM-A522 - Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
- ASTM-A523 - Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
- ASTM-A524 - Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
- ASTM-A53 - Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
- ASTM-A530 - Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
- ASTM-A539 - Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines (Withdrawn 2004)
- ASTM-A540 - Standard Specification for Alloy-Steel Bolting for Special Applications
- ASTM-A554 - Standard Specification for Welded Stainless Steel Mechanical Tubing
- ASTM-A556 - Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
- ASTM-A587 - Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
- ASTM-A589 - Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
- ASTM-A595 - Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
- ASTM-A608 - Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
- ASTM-A614 - Specification for Special Requirements for Bolting Material for Nuclear and Other Special Applications (Withdrawn 1986)
- ASTM-A618 - Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM-A632 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
- ASTM-A651 - Specification for Stainless Steel Water-DWV Tube (Withdrawn 1986)
- ASTM-A652 - Specification for Special Requirements for Wrought Steel Welding Fittings for Nuclear and Other Special Applications (Withdrawn 1983)
- ASTM-A655 - Specification for Special Requirements for Pipe and Tubing for Nuclear and Other Special Applications (Withdrawn 1983)
- ASTM-A669 - Specification for Seamless Ferritic-Austenitic Alloy Steel Tubes (Withdrawn 1983)
- ASTM-A671 - Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
- ASTM-A672 - Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
- ASTM-A688 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
- ASTM-A691 - Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
- ASTM-A694 - Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
- ASTM-A707 - Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
- ASTM-A714 - Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe (Withdrawn 2014)
- ASTM-A727 - Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
- ASTM-A733 - Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
- ASTM-A751 - Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
- ASTM-A758 - Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
- ASTM-A771 - Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components (Withdrawn 2004)
- ASTM-A774 - Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
- ASTM-A778 - Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
- ASTM-A787 - Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
- ASTM-A789 - Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
- ASTM-A790 - Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
- ASTM-A791 - Specification for Aluminum-Zinc Alloy-Coated Wire Strand (Withdrawn 1995)
- ASTM-A795 - Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
- ASTM-A803 - Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
- ASTM-A813 - Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
- ASTM-A814 - Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
- ASTM-A815 - Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
- ASTM-A822 - Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
- ASTM-A826 - Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components
- ASTM-A836 - Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
- ASTM-A847 - Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
- ASTM-A851 - Standard Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes (Withdrawn 2002)
- ASTM-A858 - Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
- ASTM-A860 - Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
- ASTM-A865 - Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
- ASTM-A872 - Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
- ASTM-A908 - Standard Specification for Stainless Steel Needle Tubing
- ASTM-A919 - Terminology Relating to Heat Treatment of Metals (Withdrawn 1999) Use ASTM-A941
- ASTM-A928 - Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
- ASTM-A941 - Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- ASTM-A943 - Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
- ASTM-A949 - Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
- ASTM-A953 - Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing (Withdrawn 2005)
- ASTM-A954 - Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe (Withdrawn 2005)
- ASTM-A959 - Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
- ASTM-A960 - Standard Specification for Common Requirements for Wrought Steel Piping Fittings
- ASTM-A961 - Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
- ASTM-A962 - Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
- ASTM-A972 - Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
- ASTM-A984 - Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded (Withdrawn 2014)
- ASTM-A988 - Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
- ASTM-A989 - Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
- ASTM-A994 - Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
- ASTM-A999 - Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
- ASTM-E527 - Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)