Document Center is acquired by Nimonik

05.02: Petroleum Products and Lubricants (II): D3711 - D6122

ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.

Return to Section Index

The following documents are a part of this series:

• ASTM-D1262 - Method of Test for Lead in New and Used Greases (Withdrawn 1989)
• ASTM-D1949 - Test Method for Separation of Tetraethyllead and Tetramethyllead in Gasoline (Withdrawn 1990)
• ASTM-D2005 - Method of Test for Sealing Strength of Petroleum Wax (Withdrawn 1985)
• ASTM-D2267 - Test Method for Aromatics in Light Naphthas, and Aviation Gasolines by Gas Chromatography (Withdrawn 1992)
• ASTM-D2424 - Method of Test for Hydrocarbon Types in Propylene Polymer by Mass Spectrometry (Withdrawn 1984)
• ASTM-D2551 - Method of Test for Vapor Pressure of Petroleum Products (Micromethod) (Withdrawn 1987)
• ASTM-D2598 - Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
• ASTM-D2599 - Methods of Test for Lead in Gasoline by X-Ray Spectrometry (Withdrawn 1992)
• ASTM-D2600 - Test Method for Aromatic Traces in Light Saturated Hydrocarbons by Gas Chromatography (Withdrawn 1992)
• ASTM-D2619 - Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
• ASTM-D2624 - Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
• ASTM-D2709 - Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
• ASTM-D2713 - Standard Test Method for Dryness of Propane (Valve Freeze Method)
• ASTM-D2717 - Standard Test Method for Thermal Conductivity of Liquids (Withdrawn 2018)
• ASTM-D2766 - Standard Test Method for Specific Heat of Liquids and Solids (Withdrawn 2018)
• ASTM-D2781 - Method of Test for Compatibility of Fuel Oil Blends by Spot Test (Withdrawn 1991)
• ASTM-D2785 - Method of Test for Trace Quantities of Total Sulfur (Wickbold and Beckman Combustion Apparatus) (Withdrawn 1987)
• ASTM-D2786 - Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry (Withdrawn 2023)
• ASTM-D2789 - Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry (Withdrawn 2023)
• ASTM-D2878 - Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
• ASTM-D2880 - Standard Specification for Gas Turbine Fuel Oils
• ASTM-D2883 - Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials (Withdrawn 2016)
• ASTM-D2887 - Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
• ASTM-D2982 - Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
• ASTM-D3114 - Method of Test for D-C Electrical Conductivity of Hydrocarbon Fuels (Withdrawn 1985)
• ASTM-D3115 - Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear (Withdrawn 2019)
• ASTM-D3119 - Method of Test for Mist Spray Flammability of Hydraulic Fluids (Withdrawn 1988)
• ASTM-D3228 - Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
• ASTM-D3234 - Standard Test Method for Abrasion Resistance of Petroleum Wax Coatings (Withdrawn 2004)
• ASTM-D3428 - Method of Test for Torque Stability Wear and Brine Sensitivity Evaluation of Ball Joint Greases (Withdrawn 1990)
• ASTM-D3520 - Standard Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method) (Withdrawn 2008)
• ASTM-D3602 - Test Method for Water Separation Characteristics of Aviation Turbine Fuels (Withdrawn 1994)
• ASTM-D3706 - Standard Test Method for Hot Tack of Wax-Polymer Blends by the Flat Spring Test (Withdrawn 2004)
• ASTM-D3711 - Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors (Withdrawn 2016)
• ASTM-D3712 - Standard Test Method of Analysis of Oil-Soluble Sulfonates by Liquid Chromatography
• ASTM-D3764 - Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
• ASTM-D3825 - Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique (Withdrawn 2016)
• ASTM-D3827 - Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids
• ASTM-D3828 - Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
• ASTM-D3829 - Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
• ASTM-D3830 - Practice for Filter Membrane Color Ratings of Aviation Turbine Fuels (Withdrawn 1994)
• ASTM-D3831 - Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
• ASTM-D3904 - Test Method for Oil From Oil Shale (Resource Evaluation by the Fischer Assay Procedure) (Withdrawn 1996)
• ASTM-D3944 - Standard Test Method for Solidification Point of Petroleum Wax
• ASTM-D3945 - Standard Test Methods for Shear Stability of Polymer-Containing Fluids Using a Diesel Injector Nozzle (Withdrawn 1998)
• ASTM-D3947 - Standard Test Method for Specific Heat of Aircraft Turbine Lubricants by Thermal Analysis (Withdrawn 1999)
• ASTM-D3948 - Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
• ASTM-D4006 - Standard Test Method for Water in Crude Oil by Distillation
• ASTM-D4007 - Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
• ASTM-D4042 - Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils
• ASTM-D4045 - Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
• ASTM-D4046 - Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry (Withdrawn 2019)
• ASTM-D4047 - Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
• ASTM-D4048 - Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
• ASTM-D4049 - Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
• ASTM-D4051 - Standard Practice for Preparation of Low-Pressure Gas Blends
• ASTM-D4052 - Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
• ASTM-D4053 - Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy (Withdrawn 2013)
• ASTM-D4054 - Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives
• ASTM-D4055 - Standard Test Method for Pentane Insolubles by Membrane Filtration
• ASTM-D4056 - Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
• ASTM-D4057 - Standard Practice for Manual Sampling of Petroleum and Petroleum Products
• ASTM-D4072 - Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
• ASTM-D4170 - Standard Test Method for Fretting Wear Protection by Lubricating Greases
• ASTM-D4171 - Standard Specification for Fuel System Icing Inhibitors
• ASTM-D4172 - Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
• ASTM-D4174 - Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
• ASTM-D4175 - Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
• ASTM-D4176 - Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
• ASTM-D4177 - Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
• ASTM-D4178 - Standard Practice for Calibrating Moisture Analyzers
• ASTM-D4241 - Standard Practice for Design of Gas Turbine Generator Lubricating Oil Systems (Withdrawn 2008)
• ASTM-D4248 - Standard Practice for Design of Steam Turbine Generator Oil Systems (Withdrawn 2008)
• ASTM-D4289 - Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
• ASTM-D4290 - Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
• ASTM-D4291 - Standard Test Method for Trace Ethylene Glycol in Used Engine Oil
• ASTM-D4292 - Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
• ASTM-D4293 - Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication and Steam Turbine Electro-Hydraulic Control (EHC) Applications
• ASTM-D4294 - Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
• ASTM-D4296 - Standard Practice for Sampling Pitch
• ASTM-D4304 - Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines
• ASTM-D4305 - Standard Test Method for Filter Flow of Aviation Fuels at Low Temperatures (Withdrawn 2010)
• ASTM-D4306 - Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
• ASTM-D4307 - Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
• ASTM-D4308 - Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
• ASTM-D4310 - Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
• ASTM-D4312 - Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
• ASTM-D4377 - Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (Withdrawn 2020)
• ASTM-D4378 - Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
• ASTM-D4418 - Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
• ASTM-D4419 - Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
• ASTM-D4420 - Standard Test Method for Determination of Aromatics in Finished Gasoline by Gas Chromatography (Withdrawn 2004)
• ASTM-D4421 - Standard Test Method for Volatile Matter in Petroleum Coke (Withdrawn 2004)
• ASTM-D4422 - Standard Test Method for Ash in Analysis of Petroleum Coke
• ASTM-D4423 - Standard Test Method for Determination of Carbonyls in C4 Hydrocarbons
• ASTM-D4424 - Standard Test Method for Butylene Analysis by Gas Chromatography (Withdrawn 2023)
• ASTM-D4425 - Standard Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method)
• ASTM-D4484 - Test Method for Inorganic Particles in Marine Residual Fuel Oils by Selective Centrifugal Separation (Withdrawn 1993)
• ASTM-D4485 - Standard Specification for Performance of Active API Service Category Engine Oils
• ASTM-D4486 - Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
• ASTM-D4529 - Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
• ASTM-D4530 - Standard Test Method for Determination of Carbon Residue (Micro Method)
• ASTM-D4539 - Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
• ASTM-D4616 - Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
• ASTM-D4625 - Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
• ASTM-D4626 - Standard Practice for Calculation of Gas Chromatographic Response Factors
• ASTM-D4627 - Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids
• ASTM-D4628 - Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
• ASTM-D4629 - Standard Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
• ASTM-D4636 - Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
• ASTM-D4681 - Specification For Lubricants For Two-Stroke-Cycle Gasoline Engines- (TSC-4) (Withdrawn 1995)
• ASTM-D4682 - Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants
• ASTM-D4683 - Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C
• ASTM-D4684 - Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
• ASTM-D4693 - Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
• ASTM-D4715 - Standard Test Method for Coking Value of Tar and Pitch (Alcan)
• ASTM-D4737 - Standard Test Method for Calculated Cetane Index by Four Variable Equation
• ASTM-D4739 - Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
• ASTM-D4740 - Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
• ASTM-D4741 - Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
• ASTM-D4742 - Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
• ASTM-D4746 - Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
• ASTM-D480 - Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
• ASTM-D4806 - Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
• ASTM-D4807 - Standard Test Method for Sediment in Crude Oil by Membrane Filtration
• ASTM-D4808 - Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
• ASTM-D4809 - Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
• ASTM-D4814 - Standard Specification for Automotive Spark-Ignition Engine Fuel
• ASTM-D4815 - Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
• ASTM-D4816 - Standard Test Method for Specific Heat of Aircraft Turbine Fuels by Thermal Analysis (Withdrawn 1999)
• ASTM-D4857 - Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards (Withdrawn 2021)
• ASTM-D4858 - Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines (Withdrawn 2022)
• ASTM-D4859 - Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC (Withdrawn 2022)
• ASTM-D4860 - Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
• ASTM-D4862 - Test Method For Evaluating Hydraulic Transmission Fluid Antiwear Properties (Withdrawn 1995)
• ASTM-D4863 - Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants (Withdrawn 2022)
• ASTM-D4864 - Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography (Withdrawn 2016)
• ASTM-D4865 - Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
• ASTM-D4868 - Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
• ASTM-D4870 - Standard Test Method for Determination of Total Sediment in Residual Fuels
• ASTM-D4871 - Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
• ASTM-D4892 - Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
• ASTM-D4893 - Standard Test Method for Determination of Pitch Volatility
• ASTM-D4898 - Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
• ASTM-D4927 - Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
• ASTM-D4928 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
• ASTM-D4929 - Standard Test Method for Determination of Organic Chloride Content in Crude Oil
• ASTM-D4930 - Standard Test Method for Dust Control Material on Calcined Petroleum Coke
• ASTM-D4931 - Standard Test Method for Gross Moisture in Green Petroleum Coke
• ASTM-D4950 - Standard Classification and Specification for Automotive Service Greases
• ASTM-D4951 - Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
• ASTM-D4952 - Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
• ASTM-D4953 - Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
• ASTM-D4996 - Test Method for Evaluation of Fluids for Effects on Wear of Tractor Final Drives (Withdrawn 1995)
• ASTM-D4997 - Test Methods for Evaluation of Water Sensitivity of Multi-Purpose Power Transmission Fluids (Withdrawn 1995)
• ASTM-D4998 - Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
• ASTM-D4999 - Test Method for Evaluating of Wet, Bronze-Faced, Friction Brakes (Withdrawn 1995)
• ASTM-D5000 - Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor (Withdrawn 2014)
• ASTM-D5001 - Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
• ASTM-D5002 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
• ASTM-D5003 - Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke
• ASTM-D5004 - Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
• ASTM-D5005 - Test Method for Evaluation of Fluids for Effects on Friction and Wear of Wet Clutches (Withdrawn 1995)
• ASTM-D5006 - Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
• ASTM-D5018 - Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
• ASTM-D5056 - Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
• ASTM-D5059 - Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy
• ASTM-D5119 - Standard Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine (Withdrawn 2003)
• ASTM-D5133 - Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
• ASTM-D5134 - Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
• ASTM-D5182 - Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
• ASTM-D5183 - Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
• ASTM-D5184 - Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
• ASTM-D5185 - Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
• ASTM-D5186 - Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels By Supercritical Fluid Chromatography
• ASTM-D5187 - Standard Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction
• ASTM-D5188 - Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)
• ASTM-D5190 - Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method) (Withdrawn 2012)
• ASTM-D5191 - Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
• ASTM-D5234 - Standard Guide for Analysis of Ethylene Product
• ASTM-D5236 - Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
• ASTM-D5273 - Standard Guide for Analysis of Propylene Concentrates
• ASTM-D5274 - Standard Guide for Analysis of 1,3–Butadiene Product
• ASTM-D5275 - Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids
• ASTM-D5291 - Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
• ASTM-D5292 - Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy (Withdrawn 2018)
• ASTM-D5293 - Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator
• ASTM-D5302 - Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions (Withdrawn 2003)
• ASTM-D5303 - Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography
• ASTM-D5304 - Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
• ASTM-D5305 - Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor
• ASTM-D5306 - Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
• ASTM-D5307 - Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography (Withdrawn 2011)
• ASTM-D5372 - Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
• ASTM-D5384 - Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
• ASTM-D5441 - Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
• ASTM-D5442 - Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
• ASTM-D5443 - Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography
• ASTM-D5452 - Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
• ASTM-D5453 - Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
• ASTM-D5481 - Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
• ASTM-D5482 - Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method—Atmospheric)
• ASTM-D5483 - Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
• ASTM-D5500 - Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
• ASTM-D5501 - Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20 % Ethanol by Gas Chromatography
• ASTM-D5502 - Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
• ASTM-D5534 - Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
• ASTM-D5579 - Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
• ASTM-D5580 - Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
• ASTM-D5598 - Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
• ASTM-D5599 - Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
• ASTM-D5600 - Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
• ASTM-D5619 - Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine (Withdrawn 2016)
• ASTM-D5620 - Standard Test Method for Evaluating Thin Film Fluid Lubricants in a Drain and Dry Mode Using a Pin and Vee Block Test Machine (Withdrawn 2010)
• ASTM-D5621 - Standard Test Method for Sonic Shear Stability of Hydraulic Fluids
• ASTM-D5622 - Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
• ASTM-D5623 - Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
• ASTM-D5662 - Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
• ASTM-D5704 - Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
• ASTM-D5705 - Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
• ASTM-D5706 - Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
• ASTM-D5707 - Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
• ASTM-D5708 - Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
• ASTM-D5709 - Standard Test Method for Sieve Analysis of Petroleum Coke
• ASTM-D5760 - Standard Specification for Performance of Manual Transmission Gear Lubricants
• ASTM-D5761 - Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials
• ASTM-D5762 - Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
• ASTM-D5763 - Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware
• ASTM-D5769 - Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
• ASTM-D5770 - Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
• ASTM-D5771 - Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
• ASTM-D5772 - Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
• ASTM-D5773 - Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
• ASTM-D5797 - Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines
• ASTM-D5798 - Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
• ASTM-D5799 - Standard Test Method for Determination of Peroxides in Butadiene
• ASTM-D5800 - Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• ASTM-D5842 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
• ASTM-D5845 - Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
• ASTM-D5846 - Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
• ASTM-D5853 - Standard Test Method for Pour Point of Crude Oils
• ASTM-D5854 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
• ASTM-D5862 - Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine (Withdrawn 2009)
• ASTM-D5863 - Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
• ASTM-D5864 - Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
• ASTM-D5901 - Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) (Withdrawn 2010)
• ASTM-D5949 - Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
• ASTM-D5950 - Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
• ASTM-D5966 - Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
• ASTM-D5967 - Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
• ASTM-D5968 - Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121 °C
• ASTM-D5969 - Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
• ASTM-D5972 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
• ASTM-D5983 - Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Blending With Gasolines for Use as Automotive Spark-Ignition Engine Fuel
• ASTM-D5984 - Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
• ASTM-D5985 - Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
• ASTM-D5986 - Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
• ASTM-D6006 - Standard Guide for Assessing Biodegradability of Hydraulic Fluids
• ASTM-D6021 - Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
• ASTM-D6022 - Standard Practice for Calculation of Permanent Shear Stability Index
• ASTM-D6045 - Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
• ASTM-D6046 - Standard Classification of Hydraulic Fluids for Environmental Impact
• ASTM-D6074 - Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
• ASTM-D6078 - Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE) (Withdrawn 2021)
• ASTM-D6079 - Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
• ASTM-D6080 - Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
• ASTM-D6081 - Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
• ASTM-D6082 - Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
• ASTM-D6120 - Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
• ASTM-D6121 - Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
• ASTM-D6122 - Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
• ASTM-D6138 - Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
• ASTM-D6139 - Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask
• ASTM-D6158 - Standard Specification for Mineral Hydraulic Oils
• ASTM-D6159 - Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography
• ASTM-D6160 - Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography
• ASTM-D6184 - Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)
• ASTM-D6185 - Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
• ASTM-D6200 - Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
• ASTM-D6203 - Standard Test Method for Thermal Stability of Way Lubricants
• ASTM-D6217 - Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
• ASTM-D6224 - Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
• ASTM-D6227 - Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
• ASTM-D6258 - Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
• ASTM-D6259 - Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method
• ASTM-D6277 - Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
• ASTM-D6296 - Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography
• ASTM-D6299 - Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
• ASTM-D6300 - Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
• ASTM-D6304 - Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
• ASTM-D6334 - Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence (Withdrawn 2022)
• ASTM-D6351 - Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
• ASTM-D6352 - Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
• ASTM-D6353 - Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
• ASTM-D6354 - Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
• ASTM-D6371 - Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
• ASTM-D6374 - Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure
• ASTM-D6375 - Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
• ASTM-D6378 - Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
• ASTM-D6379 - Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
• ASTM-D6384 - Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants
• ASTM-D6423 - Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends
• ASTM-D6425 - Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
• ASTM-D6426 - Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
• ASTM-D6439 - Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
• ASTM-D6443 - Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
• ASTM-D6448 - Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
• ASTM-D6450 - Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
• ASTM-D6468 - Standard Test Method for High Temperature Stability of Middle Distillate Fuels