12.02: Nuclear (II), Solar, and Geothermal Energy
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-51026 - Standard Practice for Using the Fricke Dosimetry System
- ASTM-51204 - Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
- ASTM-51205 - Standard Practice for Use of a Ceric-Cerous Sulfate Dosimetry System
- ASTM-51261 - Standard Practice for Calibration of Routine Dosimetry Systems for Radiation Processing
- ASTM-51275 - Standard Practice for Use of a Radiochromic Film Dosimetry System
- ASTM-51310 - Standard Practice for Use of a Radiochromic Optical Waveguide Dosimetry System
- ASTM-51400 - Standard Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory (Withdrawn 2013)
- ASTM-51401 - Standard Practice for Use of a Dichromate Dosimetry System
- ASTM-51431 - Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food Processing (Withdrawn 2018)
- ASTM-51538 - Standard Practice for Use of the Ethanol-Chlorobenzene Dosimetry System
- ASTM-51539 - Standard Guide for Use of Radiation-Sensitive Indicators
- ASTM-51540 - Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
- ASTM-51607 - Standard Practice for Use of the Alanine-EPR Dosimetry System
- ASTM-51608 - Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV
- ASTM-51631 - Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration
- ASTM-51649 - Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV
- ASTM-51650 - Standard Practice for Use of Cellulose Acetate Dosimetry Systems
- ASTM-51702 - Standard Practice for Dosimetry in a Gamma Facility for Radiation Processing
- ASTM-51707 - Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
- ASTM-51818 - Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 80 and 300 keV
- ASTM-51900 - Standard Guide for Dosimetry in Radiation Research on Food and Agricultural Products
- ASTM-51939 - Standard Practice for Blood Irradiation Dosimetry
- ASTM-51940 - Standard Guide for Irradiation of Insects for Sterile Release Programs
- ASTM-51956 - Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
- ASTM-52116 - Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma-Ray Irradiator
- ASTM-52303 - Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
- ASTM-D1671 - Method of Test for Absorbed Gamma Radiation Dose in the Fricke Dosimeter (Withdrawn 1983)
- ASTM-D1672 - Recommended Practices for Exposure of Polymeric Materials To High-Energy Radiation (Withdrawn 1983)
- ASTM-E1002 - Standard Practice for Leaks Using Ultrasonics
- ASTM-E1005 - Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance
- ASTM-E1006 - Standard Practice for Analysis and Interpretation of Physics Dosimetry Results from Test Reactor Experiments
- ASTM-E1008 - Standard Practice for Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Temperature Liquid Applications (Withdrawn 2018)
- ASTM-E1018 - Standard Guide for Application of ASTM Evaluated Cross Section Data File
- ASTM-E1021 - Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
- ASTM-E1026 - Standard Practice for Using the Fricke Dosimetry System
- ASTM-E1027 - Practice for Exposure of Polymeric Materials to Ionizing Radiation (Withdrawn 1996)
- ASTM-E1034 - Standard Specification for Nuclear Facility Transient Worker Records
- ASTM-E1035 - Standard Practice for Determining Neutron Exposures for Nuclear Reactor
Vessel Support Structures - ASTM-E1036 - Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
- ASTM-E1036M - Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells (Withdrawn 2005)
- ASTM-E1038 - Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls
- ASTM-E1039 - Standard Test Method for Calibration of Silicon Non-Concentrator Photovoltaic Primary Reference Cells Under Global Irradiation (Withdrawn 2004)
- ASTM-E1040 - Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells
- ASTM-E1056 - Standard Practice for Installation and Service of Solar Domestic Water Heating Systems for One- and Two-Family Dwellings
- ASTM-E1068 - Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid (Withdrawn 2018)
- ASTM-E1069 - Standard Test Method for Testing Polymeric Seal Materials for Geothermal and/or High Temperature Service Under Sealing Stress (Withdrawn 2018)
- ASTM-E1084 - Standard Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight
- ASTM-E1089 - Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference (Withdrawn 2013)
- ASTM-E1125 - Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
- ASTM-E1128 - Practice for Establishing Parameters for Testing Dynamic Seals for Geothermal Use (Withdrawn 1993)
- ASTM-E1143 - Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
- ASTM-E1144 - Method for Calibration of Non-Concentrator Terrestrial Photovoltaic Primary Reference Cells Under Direct Irradiance (Withdrawn 1992)
- ASTM-E1160 - Standard Guide for On-Site Inspection and Verification of Operation of Solar Domestic Hot Water Systems
- ASTM-E1167 - Standard Guide for Radiation Protection Program for Decommissioning Operations
- ASTM-E1168 - Standard Guide for Radiological Protection Training for Nuclear Facility Workers
- ASTM-E1171 - Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
- ASTM-E1175 - Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere
- ASTM-E1204 - Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2002)
- ASTM-E1205 - Standard Practice for Use of a Ceric-Cerous Sulfate Dosimetry System (Withdrawn 2002)
- ASTM-E1214 - Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance
- ASTM-E1240 - Test Method for Performance Testing of Wind Energy Conversion Systems (Withdrawn 2001)
- ASTM-E1249 - Standard Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources
- ASTM-E1250 - Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices
- ASTM-E1253 - Standard Guide for Reconstitution of Charpy-Sized Specimens
- ASTM-E1261 - Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing (Withdrawn 2002)
- ASTM-E1275 - Standard Practice for Use of a Radiochromic Film Dosimetry System (Withdrawn 2002)
- ASTM-E1276 - Standard Practice for Use of a Polymethylmethacrylate Dosimetry System
- ASTM-E1278 - Standard Guide for Radioactive Pathway Methodology for Release of Sites Following Decommissioning (Withdrawn 2005)
- ASTM-E1281 - Standard Guide for Nuclear Facility Decommissioning Plans
- ASTM-E1297 - Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
- ASTM-E1310 - Standard Practice for Use of a Radiochromic Optical Waveguide Dosimetry System (Withdrawn 2002)
- ASTM-E1328 - Standard Terminology Relating to Photovoltaic Solar Energy Conversion (Withdrawn 2012)
- ASTM-E1362 - Standard Test Methods for Calibration of Non-Concentrator Photovoltaic Non-Primary Reference Cells
- ASTM-E1400 - Standard Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory (Withdrawn 2002)
- ASTM-E1401 - Standard Practice for Use of a Dichromate Dosimetry System (Withdrawn 2002)
- ASTM-E1431 - Standard Practice for Dosimetry in Electron and Bremsstrahlung Irradiation Facilities for Food Processing (Withdrawn 2002)
- ASTM-E1462 - Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules
- ASTM-E1524 - Standard Test Method for Saltwater Immersion and Corrosion Testing of Photovoltaic Modules for Marine Environments (Withdrawn 2004)
- ASTM-E1538 - Standard Practice for Use of the Ethanol-Chlorobenzene Dosimetry System (Withdrawn 2002)
- ASTM-E1539 - Standard Guide for Use of Radiation-Sensitive Indicators (Withdrawn 2002)
- ASTM-E1540 - Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2002)
- ASTM-E1585 - Standard Test Method for Measuring and Calculating Emittance of Architectural Flat Glass Products Using Spectrometric Measurements (Withdrawn 2002)
- ASTM-E1596 - Standard Test Methods for Solar Radiation Weathering of Photovoltaic Modules (Withdrawn 2008)
- ASTM-E1597 - Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
- ASTM-E1607 - Standard Practice for Use of the Alanine-EPR Dosimetry System (Withdrawn 2002)
- ASTM-E1608 - Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing (Withdrawn 2002)
- ASTM-E1631 - Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations (Withdrawn 2002)
- ASTM-E1649 - Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV
- ASTM-E1650 - Standard Practice for Use of Cellulose Acetate Dosimetry System (Withdrawn 2002)
- ASTM-E1675 - Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
- ASTM-E170 - Standard Terminology Relating to Radiation Measurements and Dosimetry
- ASTM-E1702 - Standard Practice for Dosimetry in a Gamma Irradiation Facility for Radiation Processing (Withdrawn 2002)
- ASTM-E1707 - Standard Guide for Estimating Uncertainties in Dosimetry for Radiation Processing (Withdrawn 2002)
- ASTM-E1760 - Standard Guide for Unrestricted Disposition of Bulk Materials Containing Residual Amounts of Radioactivity
- ASTM-E1799 - Standard Practice for Visual Inspections of Photovoltaic Modules
- ASTM-E1802 - Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules
- ASTM-E181 - Standard Test Methods for Detector Calibration and Analysis of Radionuclides
- ASTM-E1818 - Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 80 and 300 KeV (Withdrawn 2002)
- ASTM-E1819 - Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities
- ASTM-E1830 - Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules
- ASTM-E184 - Standard Practice for Effects of High-Energy Neutron Radiation on the Mechanical Properties of Metallic Materials, E706 (IB) (Withdrawn 2002)
- ASTM-E185 - Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
- ASTM-E1854 - Standard Practice for Ensuring Test Consistency in Neutron-Induced Displacement Damage of Electronic Parts
- ASTM-E1855 - Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
- ASTM-E1892 - Standard Guide for Preparing Characterization Plans for Decommissioning Nuclear Facilities
- ASTM-E1893 - Standard Guide for Selection and Use of Portable Radiological Survey Instruments for Performing In Situ Radiological Assessments to Support Unrestricted Release from Further Regulatory Controls
- ASTM-E1894 - Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
- ASTM-E1900 - Standard Guide for Dosimetry in Radiation Research on Food and Agricultural Products (Withdrawn 2002)
- ASTM-E1939 - Standard Practice for Blood Irradiation Dosimetry
- ASTM-E1940 - Standard Guide for Irradiation of Insects for Sterile Release Programs (Withdrawn 2002)
- ASTM-E1956 - Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing (Withdrawn 2002)
- ASTM-E2005 - Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
- ASTM-E2006 - Standard Guide for Benchmark Testing of Light Water Reactor Calculations
- ASTM-E2047 - Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays
- ASTM-E2059 - Standard Practice for Application and Analysis of Nuclear Research Emulsions for Fast Neutron Dosimetry
- ASTM-E2116 - Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma-Ray Irradiator (Withdrawn 2003)
- ASTM-E217 - Test Method for Uranium by Controlled-Potential Coulometry (Withdrawn 1992)
- ASTM-E2215 - Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels
- ASTM-E2216 - Standard Guide for Evaluating Disposal Options for Concrete from Nuclear Facility Decommissioning
- ASTM-E2232 - Standard Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications
- ASTM-E2236 - Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
- ASTM-E2303 - Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
- ASTM-E2304 - Standard Practice for Use of a LiF Photo-Fluorescent Film Dosimetry System
- ASTM-E2381 - Standard Guide for Dosimetry In Radiation Processing of Fluidized Beds and Fluid Streams (Withdrawn 2016)
- ASTM-E2420 - Standard Guide for Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities
- ASTM-E2421 - Standard Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities
- ASTM-E2449 - Standard Guide for Irradiation of Pre-packaged Processed Meat and Poultry Products to Control Pathogens and Other Microorganisms (Withdrawn 2016)
- ASTM-E2450 - Standard Practice for Application of CaF
2 (Mn) Thermoluminescence Dosimeters in Mixed Neutron-Photon Environments - ASTM-E2481 - Standard Test Method for Hot Spot Protection Testing of Photovoltaic Modules
- ASTM-E2527 - Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight
- ASTM-E261 - Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
- ASTM-E262 - Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques
- ASTM-E2628 - Practice for Dosimetry in Radiation Processing (Withdrawn 2014)
- ASTM-E263 - Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron
- ASTM-E264 - Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel
- ASTM-E265 - Standard Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32
- ASTM-E266 - Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum
- ASTM-E2685 - Standard Specification for Steel Blades Used with the Photovoltaic Module Surface Cut Test
- ASTM-E2701 - Standard Guide for Performance Characterization of Dosimeters and Dosimetry Systems for Use in Radiation Processing (Withdrawn 2014)
- ASTM-E2766 - Standard Practice for Installation of Roof Mounted Photovoltaic Arrays on Steep-Slope Roofs
- ASTM-E2848 - Standard Test Method for Reporting Photovoltaic Non-Concentrator System Performance
- ASTM-E2908 - Standard Guide for Fire Prevention for Photovoltaic Panels, Modules, and Systems
- ASTM-E2939 - Standard Practice for Determining Reporting Conditions and Expected Capacity for Photovoltaic Non-Concentrator Systems
- ASTM-E2956 - Standard Guide for Monitoring the Neutron Exposure of LWR Reactor Pressure Vessels
- ASTM-E3006 - Standard Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus
- ASTM-E3010 - Standard Practice for Installation, Commissioning, Operation, and Maintenance Process (ICOMP) of Photovoltaic Arrays
- ASTM-E3063 - Test Method for Antimony Content Using Neutron Activation Analysis (NAA)
- ASTM-E3083 - Standard Terminology Relating to Radiation Processing: Dosimetry and Applications
- ASTM-E3084 - Standard Practice for Characterizing Particle Irradiations of Materials in Terms of Non-Ionizing Energy Loss (NIEL)
- ASTM-E3104 - Standard Specification for Strippable & Removable Coatings to Mitigate Spread of Radioactive Contamination
- ASTM-E3105 - Standard Specification for Permanent Coatings Used to Mitigate Spread of Radioactive Contamination
- ASTM-E3137 - Standard Specification for Heat Meter Instrumentation
- ASTM-E3190 - Standard Practice for Preparation of Fixed Radiological/Surrogate Contamination on Porous Test Coupon Surfaces for Evaluation of Decontamination Techniques
- ASTM-E3191 - Standard Specification for Permanent Foaming Fixatives Used to Mitigate Spread of Radioactive Contamination
- ASTM-E3205 - Standard Test Method for Small Punch Testing of Metallic Materials
- ASTM-E3270 - Standard Guide for Operational Qualification of Gamma Irradiators
- ASTM-E3283 - Standard Practice for Preparation of Loose Radiological/Surrogate Contamination on Nonporous Test Coupon Surfaces for Evaluation of Decontamination Techniques
- ASTM-E3325 - Standard Practice for Sampling of Solar Photovoltaic Modules for Toxicity Testing
- ASTM-E3376 - Standard Practice for Calibration and Usage of Germanium Detectors in Radiation Metrology for Reactor Dosimetry
- ASTM-E343 - Standard Test Method for Measuring Reaction Rates by Analysis of Molybdenum-99 Radioactivity From Fission Dosimeters (Withdrawn 2002)
- ASTM-E385 - Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
- ASTM-E393 - Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters
- ASTM-E424 - Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
- ASTM-E453 - Standard Practice for Examination of Fuel Element Cladding Including the Determination of the Mechanical Properties
- ASTM-E481 - Standard Test Method for Measuring Neutron Fluence Rates by Radioactivation of Cobalt and Silver
- ASTM-E482 - Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance
- ASTM-E496 - Standard Test Method for Measuring Neutron Fluence and Average Energy from 3H(d,n) 4He Neutron Generators by Radioactivation Techniques
- ASTM-E509 - Standard Guide for In-Service Annealing of Light-Water Moderated Nuclear Reactor Vessels
- ASTM-E521 - Standard Practice for Investigating the Effects of Neutron Radiation Damage Using Charged-Particle Irradiation
- ASTM-E523 - Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper
- ASTM-E525 - Practice for Reporting Dosimetry Results on Nuclear Graphite (Withdrawn 2001)
- ASTM-E526 - Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium
- ASTM-E531 - Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials (Withdrawn 2022)
- ASTM-E560 - Standard Practice for Extrapolating Reactor Vessel Surveillance Dosimetry Results, E706(IC) (Withdrawn 2009)
- ASTM-E583 - Practice for Systematizing the Development of (ASTM) Voluntary Consensus Standards for the Solution of Nuclear and Other Complex Problems (Withdrawn 1995)
- ASTM-E636 - Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels
- ASTM-E665 - Practice for Using Absorbed Dose Versus Depth in Materials to Verify the X-ray Output of Flash X-ray Machines (Withdrawn 2000)
- ASTM-E666 - Standard Practice for Calculating Absorbed Dose From Gamma or X Radiation
- ASTM-E668 - Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
- ASTM-E683 - Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings
- ASTM-E693 - Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA)
- ASTM-E704 - Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238
- ASTM-E705 - Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237
- ASTM-E706 - Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards
- ASTM-E712 - Standard Practice for Laboratory Screening of Metallic Containment Materials for Use With Liquids in Solar Heating and Cooling Systems (Withdrawn 2018)
- ASTM-E720 - Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
- ASTM-E721 - Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
- ASTM-E722 - Standard Practice for Characterizing Neutron Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation-Hardness Testing of Electronics
- ASTM-E744 - Standard Practice for Evaluating Solar Absorptive Materials for Thermal Applications
- ASTM-E745 - Standard Practices for Simulated Service Testing for Corrosion of Metallic Containment Materials for Use With Heat-Transfer Fluids in Solar Heating and Cooling Systems (Withdrawn 2018)
- ASTM-E763 - Practice for Calculation of Absorbed Dose From Neutron Irradiation by Application of Threshold-Foil Measurement Data (Withdrawn 1997)
- ASTM-E764 - Practice for Identifying Test Methods for Breeder Reactor Core Materials (Withdrawn 1998)
- ASTM-E765 - Practice for Evaluation of Cover Materials for Flat Plate Solar Collectors (Withdrawn 1991)
- ASTM-E772 - Standard Terminology of Solar Energy Conversion
- ASTM-E781 - Standard Practice for Evaluating Absorptive Solar Receiver Materials When
Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates - ASTM-E782 - Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode
- ASTM-E798 - Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources
- ASTM-E820 - Practice for Determining Absolute Absorbed Dose Rates for Electron Beams (Withdrawn 1987)
- ASTM-E821 - Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
- ASTM-E822 - Standard Practice for Determining Resistance of Solar Collector Covers to Hail by Impact With Propelled Ice Balls
- ASTM-E823 - Standard Practice for Nonoperational Exposure and Inspection of a Solar Collector
- ASTM-E838 - Practice for Performing Accelerated Outdoor Weathering Using Concentrated Natural Sunlight (Withdrawn 1992)
- ASTM-E844 - Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance
- ASTM-E845 - Method for Calibration of Dosimeters Against an Adiabatic Calorimeter for Use in Flash X-Ray Fields (Withdrawn 1987)
- ASTM-E853 - Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Neutron Exposure Results
- ASTM-E854 - Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance
- ASTM-E861 - Standard Practice for Evaluating Thermal Insulation Materials for Use in Solar Collectors
- ASTM-E881 - Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode
- ASTM-E900 - Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials
- ASTM-E901 - Classification System for Uranium Resources (Withdrawn 2001)
- ASTM-E903 - Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
- ASTM-E904 - Standard Practice for Generating All-Day Thermal Performance Data for Solar Collectors (Withdrawn 2013)
- ASTM-E905 - Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors
- ASTM-E909 - Master Matrix for Development of Standards to Assist in Safeguarding of Nuclear Materials (Withdrawn 1989)
- ASTM-E910 - Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance
- ASTM-E927 - Standard Classification for Solar Simulators for Electrical Performance Testing of Photovoltaic Devices
- ASTM-E942 - Standard Guide for Investigating the Effects of Helium in Irradiated Metals
- ASTM-E944 - Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance
- ASTM-E947 - Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
- ASTM-E948 - Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
- ASTM-E957 - Standard Terminology Relating to Geothermal Energy
- ASTM-E971 - Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
- ASTM-E972 - Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
- ASTM-E973 - Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
- ASTM-E973M - Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell [Metric] (Withdrawn 2005)
- ASTM-E974 - Standard Guide for Specifying Thermal Performance of Geothermal Power Systems (Withdrawn 2015)
- ASTM-F1355 - Standard Guide for Irradiation of Fresh Agricultural Produce as a Phytosanitary Treatment
- ASTM-F1356 - Standard Guide for Irradiation of Fresh, Frozen or Processed Meat and Poultry to Control Pathogens and Other Microorganisms
- ASTM-F1640 - Standard Guide for Selection and Use of Contact Materials for Foods to Be Irradiated
- ASTM-F1736 - Standard Guide for Irradiation of Finfish and Aquatic Invertebrates Used as Food to Control Pathogens and Spoilage Microorganisms
- ASTM-F1885 - Standard Guide for Irradiation of Dried Spices, Herbs, and Vegetable Seasonings to Control Pathogens and Other Microorganisms
- ASTM-F526 - Standard Test Method for Using Calorimeters for Total Dose Measurements in Pulsed Linear Accelerator or Flash X-ray Machines
- ASTM-ISO-53239 - Standard Guide for Using Statistical Process Control Principles for Routine Dosimetry in Radiation Processing