08.02: Plastics (II): D3222 - D5083
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-D1463 - Specification for Biaxially Oriented Styrene Plastics Sheet (Withdrawn 1987)
- ASTM-D1502 - Method of Test for Transverse Load of Corrugated Reinforced Plastic Panels (Withdrawn 1983)
- ASTM-D1503 - Specification for Cellulose Acetate Butyrate (CAB) Plastic Pipe, Schedule 40
- ASTM-D1504 - Recommended Practice for Determining Orientation Release Stress of Plastic Sheeting (Withdrawn 1987)
- ASTM-D1637 - Method of Test for Tensile Heat Distortion Temperature of Plastic Sheeting (Withdrawn 1988)
- ASTM-D1788 - Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics (Withdrawn 1988)
- ASTM-D1789 - Test Method for Welding Performance of Poly (Vinyl Chloride) Structures (Withdrawn 1982)
- ASTM-D1892 - Specification for Styrene-Butadiene Molding and Extrusion Materials (Withdrawn 1986)
- ASTM-D1893 - Method of Test for Blocking of Plastic Film (Withdrawn 1991)
- ASTM-D1897 - Recommended Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials (Withdrawn 1992)
- ASTM-D2123 - Specification for Rigid Poly (Vinyl Chloride-Vinyl Acetate) Plastic Sheet (Withdrawn 1987)
- ASTM-D2133 - Specification for Acetal Resin Injection Molding and Extrusion Materials (Withdrawn 1985)
- ASTM-D2146 - Specification for Propylene Plastic Molding and Extrusion Materials (Withdrawn 1985)
- ASTM-D2236 - Method of Test for Dynamic Mechanical Properties of Plastics by Means of a Torsienal Pendulum (Withdrawn 1984)
- ASTM-D2289 - Method of Test for Tensile Properties of Plastics at High Speeds (Withdrawn 1990)
- ASTM-D2292 - Recommended Practice for Compression Molding Test Specimens of Styrene-Butadiene Molding and Extrusion Materials (Withdrawn 1992)
- ASTM-D2341 - Specification for Rigid Urethane Foam (Withdrawn 1988)
- ASTM-D2383 - Standard Test Method for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions
- ASTM-D2393 - Test Method for Viscosity of Epoxy Resins and Related Components
- ASTM-D2396 - Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
- ASTM-D2408 - Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Amino-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988)
- ASTM-D2409 - Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Vinyl-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988)
- ASTM-D2410 - Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Chrome Complexes, for Plastic Laminates (Withdrawn 1988)
- ASTM-D2457 - Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
- ASTM-D2463 - Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
- ASTM-D2474 - Specification for Vinyl Chloride Copolymer Resins (Withdrawn 1999)
- ASTM-D2530 - Specification for Nonoriented Propylene Plastic Film (Withdrawn 1987)
- ASTM-D2538 - Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
- ASTM-D2561 - Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers
- ASTM-D2562 - Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics
- ASTM-D2563 - Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
- ASTM-D2578 - Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
- ASTM-D2581 - Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials (Withdrawn 2018)
- ASTM-D2582 - Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
- ASTM-D2583 - Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor (Withdrawn 2022)
- ASTM-D2584 - Standard Test Method for Ignition Loss of Cured Reinforced Resins
- ASTM-D2647 - Standard Specification for Crosslinkable Ethylene Plastics
- ASTM-D2659 - Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers
- ASTM-D2660 - Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Acrylic-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988)
- ASTM-D2684 - Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products
- ASTM-D2730 - Method for Sag Flow of Highly Viscous Materials (Withdrawn 1986)
- ASTM-D2732 - Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film
and Sheeting - ASTM-D2734 - Standard Test Methods for Void Content of Reinforced Plastics
- ASTM-D2741 - Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation (Withdrawn 2011)
- ASTM-D2765 - Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
- ASTM-D2838 - Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
- ASTM-D2839 - Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
- ASTM-D2841 - Practice for Sampling Hollow Microspheres (Withdrawn 1999)
- ASTM-D2842 - Standard Test Method for Water Absorption of Rigid Cellular Plastics
- ASTM-D2843 - Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
- ASTM-D2853 - Specification for Reinforced Olefin Polymers for Injection Molding and Extrusion (Withdrawn 1987)
- ASTM-D2897 - Specification for Reinforced and Filled Nylon Injection Molding and Extrusion Materials (Withdrawn 1983)
- ASTM-D2911 - Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM-D2923 - Standard Test Method for Rigidity of Polyolefin Film and Sheeting (Withdrawn 2015)
- ASTM-D2990 - Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
- ASTM-D2991 - Recommended Practice for Testing Stress-Relaxation of Plastics (Withdrawn 1990)
- ASTM-D3011 - Specification for Reinforced and Filled Polystyrene, Styrene-Acrylonitrile, and ABS for Molding and Extrusion (Withdrawn 1987)
- ASTM-D3012 - Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
- ASTM-D3014 - Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
- ASTM-D3015 - Standard Practice for Microscopical Examination of Pigment Dispersion in Plastic Compounds (Withdrawn 2001)
- ASTM-D3016 - Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships
- ASTM-D3027 - Practice for Compression Molding Specimens of Allyl Molding Compounds (Withdrawn 1992)
- ASTM-D3028 - Standard Test Method for Kinetic Coefficient of Friction of Plastic Solids (Withdrawn 2000)
- ASTM-D3030 - Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
- ASTM-D3098 - Method of Test for Finish Content of Woven Glass Fabrics, Cleaned and After-Finished with Epoxy-Functions Silane Type Finishes for Plastic Laminates (Withdrawn 1988)
- ASTM-D3124 - Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
- ASTM-D3159 - Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials
- ASTM-D3222 - Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
- ASTM-D3275 - Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
- ASTM-D3291 - Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
- ASTM-D3294 - Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes
- ASTM-D3295 - Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
- ASTM-D3296 - Standard Specification for FEP-Fluorocarbon Tube
- ASTM-D3307 - Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials
- ASTM-D3308 - Standard Specification for PTFE Resin Skived Tape
- ASTM-D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
- ASTM-D3354 - Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
- ASTM-D3364 - Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
- ASTM-D3367 - Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
- ASTM-D3368 - Standard Specification for FEP Sheet and Film
- ASTM-D3369 - Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film (Withdrawn 2006)
- ASTM-D3417 - Standard Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (Dsc) (Withdrawn 2004)
- ASTM-D3418 - Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM-D3419 - Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
- ASTM-D3420 - Standard Test Method for Pendulum Impact Resistance of Plastic Film
- ASTM-D3453 - Standard Specification for Flexible Cellular Materials—Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
- ASTM-D3465 - Standard Guide for Purity of Monomeric Plasticizers by Gas Chromatography
- ASTM-D3489 - Standard Test Methods for Microcellular Urethane Materials
- ASTM-D3536 - Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by Liquir Exclusion Chromatography (Gel Permeation Chromatography - GPC) (Withdrawn 1996)
- ASTM-D3574 - Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
- ASTM-D3575 - Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers
- ASTM-D3576 - Standard Test Method for Cell Size of Rigid Cellular Plastics
- ASTM-D3591 - Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds
- ASTM-D3594 - Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers (Withdrawn 2019)
- ASTM-D3595 - Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
- ASTM-D3596 - Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
- ASTM-D3641 - Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
- ASTM-D3647 - Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition (Withdrawn 2022)
- ASTM-D3675 - Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
- ASTM-D3676 - Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
- ASTM-D3713 - Standard Test Method for Measuring Response of Solid Plastics to Ignition by a Small Flame (Withdrawn 2000)
- ASTM-D3748 - Standard Practice for Evaluating High-Density Rigid Cellular Plastics
- ASTM-D3749 - Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique
- ASTM-D3763 - Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
- ASTM-D3768 - Standard Test Method for Microcellular Urethanes—Flexural Recovery
- ASTM-D3769 - Standard Test Method for Microcellular Urethanes—High-Temperature Sag
- ASTM-D3770 - Specification for Flexible Cellular Materials-High-Resilience Polyurethane Foam (HR) and Combustion Modified High Resilience (CMHR) Polyurethane Foam (Withdrawn 1998)
- ASTM-D3795 - Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
- ASTM-D3801 - Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM-D3814 - Standard Guide for Locating Combustion Test Methods for Polymeric Materials (Withdrawn 2012)
- ASTM-D3826 - Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
- ASTM-D3834 - Test Method for Purity of Vinyl Chloride Monomer by Gas Chromatography (Withdrawn 1998)
- ASTM-D3835 - Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
- ASTM-D3846 - Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
- ASTM-D3851 - Standard Specification for Microcellular Polyurethane Shoe Soling Materials
- ASTM-D3892 - Standard Practice for Packaging/Packing of Plastics
- ASTM-D3894 - Test Method for Evaluation of Fire Response of Rigid Cellular Plastics Using a Small Corner Configuration (Withdrawn 1994)
- ASTM-D3895 - Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
- ASTM-D3914 - Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
- ASTM-D3915 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications (Withdrawn 2015)
- ASTM-D3916 - Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced
Plastic Rod - ASTM-D3917 - Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
- ASTM-D3918 - Standard Terminology Relating to Reinforced Plastic Pultruded Products (Withdrawn 2020)
- ASTM-D3935 - Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
- ASTM-D3965 - Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
- ASTM-D3981 - Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
- ASTM-D4000 - Standard Classification System for Specifying Plastic Materials
- ASTM-D4001 - Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers by Light Scattering
- ASTM-D4019 - Standard Test Method for Moisture in Plastics by Coulometric Regeneration of Phosphorus Pentoxide (Withdrawn 2002)
- ASTM-D4020 - Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
- ASTM-D4065 - Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
- ASTM-D4066 - Standard Classification System for Nylon Injection and Extrusion Materials (PA)
- ASTM-D4067 - Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
- ASTM-D4092 - Standard Terminology for Plastics: Dynamic Mechanical Properties
- ASTM-D4093 - Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
- ASTM-D4094 - Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers (Withdrawn 2015)
- ASTM-D4100 - Test Method for Gravimetric Determination of Smoke Particulates from Combustion of Plastic Materials (Withdrawn 1997)
- ASTM-D4101 - Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials
- ASTM-D4181 - Standard Classification for Acetal (Pom) Molding and Extrusion Materials (Withdrawn 2005)
- ASTM-D4202 - Test Method for Thermal Stability of Poly(Vinyl Chloride) (PVC) Resin (Withdrawn 1998)
- ASTM-D4203 - Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
- ASTM-D4204 - Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
- ASTM-D4205 - Guide for For Flammability and Combustion Testing of Rubber and Rubber-Like Materials (Withdrawn 1997)
- ASTM-D4216 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
- ASTM-D4218 - Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds by the Muffle-Furnace Technique
- ASTM-D4225 - Standard Specification for Styrene-Butadiene Sheeting (Withdrawn 2009)
- ASTM-D4272 - Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop
- ASTM-D4273 - Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols
- ASTM-D4274 - Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols
- ASTM-D4275 - Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography
- ASTM-D4321 - Standard Test Method for Package Yield of Plastic Film
- ASTM-D4322 - Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography (Withdrawn 2010)
- ASTM-D4329 - Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
- ASTM-D4349 - Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
- ASTM-D4350 - Standard Test Method for Corrosivity Index of Plastics and Fillers
- ASTM-D4357 - Standard Specification for Plastic Laminates Made from Woven-Roving and Woven-Yarn Glass Fabrics (Withdrawn 2004)
- ASTM-D4364 - Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
- ASTM-D4385 - Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products
- ASTM-D4396 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
- ASTM-D4397 - Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
- ASTM-D4440 - Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology
- ASTM-D4441 - Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
- ASTM-D4443 - Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography
- ASTM-D4459 - Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
- ASTM-D4473 - Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
- ASTM-D4474 - Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (Withdrawn 2008)
- ASTM-D4475 - Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
- ASTM-D4476 - Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods (Withdrawn 2022)
- ASTM-D4508 - Standard Test Method for Chip Impact Strength of Plastics (Withdrawn 2016)
- ASTM-D4509 - Standard Test Methods for Determining the 24-Hour Gas (AIR) Space Acetaldehyde Content of Freshly Blown PET Bottles (Withdrawn 2005)
- ASTM-D4526 - Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
- ASTM-D4549 - Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
- ASTM-D4550 - Standard Specification for Thermoplastic Elastomer-Ether-Ester (TEEE) (Withdrawn 2004)
- ASTM-D4591 - Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM-D4603 - Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
- ASTM-D4617 - Standard Specification for Phenolic Compounds, (PF)
- ASTM-D4634 - Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
- ASTM-D4635 - Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
- ASTM-D4659 - Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
- ASTM-D4660 - Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate
- ASTM-D4661 - Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates
- ASTM-D4662 - Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols
- ASTM-D4663 - Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates
- ASTM-D4669 - Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
- ASTM-D4670 - Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter in Polyols
- ASTM-D4671 - Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of Polyols
- ASTM-D4672 - Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols
- ASTM-D4673 - Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
- ASTM-D4674 - Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
- ASTM-D4703 - Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
- ASTM-D4745 - Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods
- ASTM-D4754 - Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
- ASTM-D4801 - Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
- ASTM-D4802 - Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
- ASTM-D4804 - Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
- ASTM-D4805 - Standard Terminology for Plastics Standards (Withdrawn 2002)
- ASTM-D4812 - Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
- ASTM-D4819 - Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
- ASTM-D4875 - Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
- ASTM-D4876 - Standard Test Method for Polyurethane Raw Materials Determination of Acidity of Crude or Modified Isocyanates (Withdrawn 2004)
- ASTM-D4877 - Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates
- ASTM-D4878 - Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
- ASTM-D4883 - Standard Test Method for Density of Polyethylene by the Ultrasound Technique
- ASTM-D4889 - Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
- ASTM-D4890 - Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols
- ASTM-D4894 - Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
- ASTM-D4895 - Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
- ASTM-D4923 - Standard Specification for Reinforced Thermosetting Plastic Poles (Withdrawn 2010)
- ASTM-D4968 - Standard Practice for Annual Review of Test Methods and Specifications for Plastics
- ASTM-D4969 - Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric
- ASTM-D4976 - Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
- ASTM-D4986 - Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
- ASTM-D5017 - Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
- ASTM-D5021 - Standard Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA) (Withdrawn 2007)
- ASTM-D5023 - Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
- ASTM-D5024 - Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
- ASTM-D5025 - Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- ASTM-D5026 - Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
- ASTM-D5028 - Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
- ASTM-D5033 - Standard Guide for Development of ASTM Standards Relating to Recycling and Use of Recycled Plastics (Withdrawn 2007)
- ASTM-D5045 - Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
- ASTM-D5047 - Standard Specification for Polyethylene Terephthalate Film and Sheeting
- ASTM-D5048 - Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- ASTM-D5071 - Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
- ASTM-D5083 - Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens