Document Center List of Standards on Non-Textile Floor Coverings Textile Floor Coverings, See 59.080.60
ICS Code 97.150
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-C1486 - Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
- ASTM-C1732 - Standard Practice for Installation of Concrete Floor Tiles
- ASTM-D1335 - Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings
- ASTM-D2859 - Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
- ASTM-D3676 - Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
- ASTM-D3936 - Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
- ASTM-D4103 - Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
- ASTM-D418 - Standard Methods of Testing Pile Yarn Floor Covering Construction (Withdrawn 1998)
- ASTM-D4269 - Test Method for Shorn Pile Mass of Finished Tufted Pile Yarn Floor Covering (Withdrawn 1992)
- ASTM-D5215 - Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
- ASTM-D5251 - Standard Practice for the Operation of the Tetrapod Walker Drum Tester (Withdrawn 2014)
- ASTM-D5252 - Standard Practice for the Operation of the Hexapod Tumble Drum Tester
- ASTM-D5265 - Standard Test Method for Bridge Impact Testing
- ASTM-D5417 - Standard Practice for Operation of the Vettermann Drum Tester
- ASTM-D5684 - Standard Terminology Relating to Pile Floor Coverings
- ASTM-D5793 - Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings
- ASTM-D5823 - Standard Test Method for Tuft Height of Pile Floor Coverings
- ASTM-D5848 - Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
- ASTM-D6119 - Standard Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic
- ASTM-D6283 - Standard Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings
- ASTM-D6325 - Standard Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
- ASTM-D6333 - Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors
- ASTM-D6540 - Standard Test Method for Accelerated Soiling of Pile Yarn Floor Covering
- ASTM-D6719 - Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering
- ASTM-D6859 - Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings
- ASTM-D6962 - Standard Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings
- ASTM-D7241 - Standard Test Method for Pile Thickness of Finished Multilevel Pile Yarn Floor Covering
- ASTM-D727 - Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method
- ASTM-D7330 - Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
- ASTM-D7339 - Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography
- ASTM-D7570 - Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering
- ASTM-D7888 - Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings
- ASTM-D7983 - Standard Test Method for Shrinkage of Carpet Backing Fabrics
- ASTM-E141 - Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
- ASTM-E2471 - Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets
- ASTM-E648 - Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
- ASTM-F1037 - Standard Test Method for Visual Rating of Appearance of Resilient Floors
- ASTM-F1066 - Standard Specification for Vinyl Composition Floor Tile
- ASTM-F1102 - Guide for Preparation of Use and Care Booklets for Residential Resilient Nontextile Floor Coverings (Withdrawn 2000)
- ASTM-F1265 - Standard Test Method for Resistance to Impact for Resilient Floor Tile
- ASTM-F1289 - Practice for Development of Literature Pertaining to the Selection of Residential Resilient Floor Coverings (Withdrawn 2000)
- ASTM-F1303 - Standard Specification for Sheet Vinyl Floor Covering with Backing
- ASTM-F1304 - Standard Test Method for Deflection of Resilient Floor Tile
- ASTM-F1331 - Standard Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces
- ASTM-F1344 - Standard Specification for Rubber Floor Tile
- ASTM-F137 - Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
- ASTM-F141 - Standard Terminology Relating to Resilient Floor Coverings
- ASTM-F1480 - Guide for Preparing a Chart for Presenting Residential Resilient Floor Covering Information to the Consumer (Withdrawn 2000)
- ASTM-F1482 - Standard Practice for Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring
- ASTM-F150 - Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring
- ASTM-F1514 - Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
- ASTM-F1516 - Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)
- ASTM-F1859 - Standard Specification for Rubber Sheet Floor Covering Without Backing
- ASTM-F1860 - Standard Specification for Rubber Sheet Floor Covering With Backing
- ASTM-F1913 - Standard Specification for Vinyl Sheet Floor Covering Without Backing
- ASTM-F1914 - Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
- ASTM-F2055 - Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
- ASTM-F2753 - Standard Practice to Evaluate the Effect of Dynamic Rolling Load over Resilient Floor Covering System
- ASTM-F2913 - Standard Test Method for Measuring the Coefficient of Friction for Evaluation of Slip Performance of Footwear and Test Surfaces/Flooring Using a Whole Shoe Tester
- ASTM-F2982 - Standard Specification for Polyester Composition Floor Tile
- ASTM-F3009 - Standard Specification for Polyolefin Composition Floor Tile
- ASTM-F3010 - Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings
- ASTM-F3041 - Standard Specification for Bonded Rubber Crumb Floor Coverings
- ASTM-F3191 - Standard Practice for Field Determination of Substrate Water Absorption (Porosity) for Substrates to Receive Resilient Flooring
- ASTM-F3261 - Standard Specification for Resilient Flooring in Modular Format with Rigid Polymeric Core
- ASTM-F373 - Standard Test Method for Embossed Depth of Resilient Floor Coverings
- ASTM-F386 - Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
- ASTM-F387 - Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
- ASTM-F410 - Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
- ASTM-F510 - Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
- ASTM-F511 - Standard Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile
- ASTM-F536 - Standard Test Method for Size of Resilient Floor Tile by Dial Gage Method (Withdrawn 2004)
- ASTM-F540 - Standard Test Method for Squareness of Resilient Floor Tile by Dial Gage Method (Withdrawn 2004)
- ASTM-F655 - Standard Specification for Test Carpets and Pads for Vacuum Cleaner Testing (Withdrawn 2022)
- ASTM-F693 - Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
- ASTM-F710 - Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
- ASTM-F924 - Standard Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings
- ASTM-F925 - Standard Test Method for Resistance to Chemicals of Resilient Flooring
- ASTM-F970 - Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading
BSI:
- BS-1711 - Specification for Solid Rubber Flooring
- BS-3261-1 - Specification for Unbacked Flexible Pvc Flooring, Homogeneous Flooring
- BS-3655 - Recommendations for informative labelling of textile floor coverings
- BS-4051 - Method for determination of thickness of textile floor coverings
- BS-4223 - Methods for determination of constructional details of textile floor coverings with yarn pile
- BS-4682-3 - Methods of test for dimensional stability of textile floor coverings
- BS-4682-4 - Methods of test for dimensional stability of textile floor coverings
- BS-4805 - Method for determination of the dimensions of rectangular textile floor coverings
- BS-5085-1 - Specification. Backed flexible PVC flooring. Needle-loom felt backed flooring
- BS-5085-2 - Specification. Backed flexible PVC flooring. Cellular PVC backing
- BS-5229 - Method for determination of tuft withdrawal force of carpets
- BS-5557 - Textile floor coverings. Vocabulary
- BS-5808 - Specification for underlays for textile floor coverings
- BS-5921 - Methods for determination of size, squareness and straightness of edge of textile floor covering tiles
- BS-6654 - Method for determination of the electrical resistivity of textile floor coverings
- BS-6659-2 - Producing and assessing changes in surface structure and colour of textile floor coverings
- BS-7078 - Method for determination of the electrical resistance to earth of an installed textile floor covering
- BS-7131-1 - Performance rating of textile floor coverings.
- BS-7399 - Method for determination of delamination force of textile floor coverings
- BS-7953 - Entrance flooring systems. Selection, installation and maintenance
- BS-8203 - Code of practice for installation of resilient floor coverings
- BS-8203-TC - Tracked Changes. Code of practice for installation of resilient floor coverings
- BS-EN-12199 - Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings
- BS-EN-12229 - Surfaces for sports areas. Procedure for the preparation of synthetic turf and needle-punch test pieces
- BS-EN-1269 - Textile floor coverings. Assessment of impregnations in needled floor coverings by means of a soiling test
- BS-EN-1307 - Textile floor coverings. Classification
- BS-EN-1318 - Textile floor coverings. Determination of the apparent effective thickness of the backing
- BS-EN-13297 - Textile floor coverings. Classification of needled pile floor coverings
- BS-EN-13329 - Laminate floor coverings. Specifications, requirements and test methods
- BS-EN-13413 - Resilient floor coverings. Polyvinyl chloride floor coverings on a filled fibrous backing. Specification
- BS-EN-13553 - Resilient floor coverings. Polyvinyl chloride floor coverings for use in special wet areas. Specification
- BS-EN-13553-TC - Tracked Changes. Resilient floor coverings. Polyvinyl chloride floor coverings for use in special wet areas. Specification
- BS-EN-13696 - Wood flooring. Test methods to determine elasticity and resistance to wear and impact resistance
- BS-EN-13744 - Surfaces for sports areas. Procedure for accelerated ageing by immersion in hot water
- BS-EN-13817 - Surfaces for sports areas. Procedure for accelerated ageing by exposure to hot air
- BS-EN-13845 - Resilient floor coverings. Polyvinyl chloride floor coverings with particle based enhanced slip resistance. Specification
- BS-EN-13893 - Resilient, laminate and textile floor coverings. Measurement of dynamic coefficient of friction on dry floor surfaces
- BS-EN-14041 - Resilient, textile, laminate and modular multilayer floor coverings. Essential characteristics
- BS-EN-14085 - Resilient floor coverings. Specification for floor panels for loose laying
- BS-EN-14159 - Textile floor coverings. Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
- BS-EN-14215 - Textile floor coverings. Classification of machine-made rugs and runners
- BS-EN-14215-TC - Tracked Changes. Textile floor coverings. Classification of machine-made rugs and runners
- BS-EN-14342 - Wood flooring and parquet. Characteristics, evaluation of conformity and marking
- BS-EN-14499 - Textile floor coverings. Minimum requirements for carpet underlays
- BS-EN-14499-TC - Tracked Changes. Textile floor coverings. Minimum requirements for carpet underlays
- BS-EN-1470 - Textile floor coverings. Classification of needled floor coverings except for needled pile floor coverings
- BS-EN-1471 - Textile floor coverings. Assessment of changes in appearance
- BS-EN-14900 - Textile floor coverings. Determination of the density of the textile fleece backing
- BS-EN-14978 - Laminate floor coverings. Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
- BS-EN-14978-TC - Tracked Changes. Laminate floor coverings. Elements with acrylic based surface layer, electron beam cured. Specifications, requirements and test methods
- BS-EN-15114 - Textile floor coverings. Classification of textile floor coverings without pile
- BS-EN-15115 - Textile floor coverings. Determination of sensitivity to spilled water
- BS-EN-1517 - Surfaces for sports areas. Determination of resistance to impact
- BS-EN-15398 - Resilient, textile, laminate and modular mechanical locked floor coverings (MMF). Floor covering standard symbols. Complementary element
- BS-EN-15468 - Laminate floor coverings. Elements with directly applied printing and resin surface layer. Specifications, requirements and test methods
- BS-EN-15468-TC - Tracked Changes. Laminate floor coverings. Elements with directly applied printing and resin surface layer. Specifications, requirements and test methods
- BS-EN-15772 - Textile floor coverings. Minimum requirements for needled floor coverings for single usage in events of limited duration
- BS-EN-15825 - Textile floor coverings. Classification of machine-made rugs and runners without pile
- BS-EN-16094 - Laminate floor coverings. Test method for the determination of micro-scratch resistance
- BS-EN-16094-TC - Tracked Changes. Laminate floor coverings. Test method for the determination of micro-scratch resistance
- BS-EN-16354 - Laminate floor coverings. Underlays. Specification, requirements and test methods
- BS-EN-16354-TC - Tracked Changes. Laminate floor coverings. Underlays. Specification, requirements and test methods
- BS-EN-16511 - Modular mechanical locked floor coverings (MMF). Specification, requirements and test method for multilayer modular panels for floating installation
- BS-EN-16511-TC - Tracked Changes. Modular mechanical locked floor coverings (MMF). Specification, requirements and test method for multilayer modular panels for floating installation
- BS-EN-16641 - Textile floor coverings. Guidelines for acceptable colour deviations
- BS-EN-16776 - Resilient floor coverings. Heterogeneous polyurethane floor coverings. Specification
- BS-EN-16810 - Resilient, textile and laminate floor coverings. Environmental product declarations. Product category rules
- BS-EN-17009 - Flooring of lignified materials other than wood. Characteristics, assessment and verification of constancy of performance and marking
- BS-EN-17317 - Resilient, textile, laminate and modular mechanical locked floor coverings. Light reflectance value (LRV) of a flooring surface
- BS-EN-17368 - Laminate floor coverings. Determination of impact resistance with small ball
- BS-EN-17396 - Resilient floor coverings. Quartz vinyl tiles. Specification
- BS-EN-17539 - Modular mechanical locked floor coverings (MMF). Determination of geometrical characteristics
- BS-EN-1814 - Textile floor coverings. Determination of resistance to damage at cut edges using the modified Vettermann drum test
- BS-EN-1815 - Resilient and laminate floor coverings. Assessment of static electrical propensity
- BS-EN-1816 - Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing
- BS-EN-1817 - Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings
- BS-EN-1818 - Resilient floor coverings. Determination of the effect of loaded heavy duty castors
- BS-EN-1910 - Wood flooring and wood panelling and cladding. Determination of dimensional stability
- BS-EN-1963 - Textile floor coverings. Tests using the Lisson Tretrad machine
- BS-EN-1969 - Surfaces for sports areas. Determination of thickness of synthetic sports surfaces
- BS-EN-423 - Resilient floor coverings. Determination of resistance to staining
- BS-EN-424 - Resilient floor coverings. Determination of the effect of simulated movement of a furniture leg
- BS-EN-425 - Resilient and laminate floor coverings. Castor chair test
- BS-EN-426 - Resilient floor coverings. Determination of width, length, straightness and flatness of sheet material
- BS-EN-427 - Resilient floor coverings. Determination of the side length, squareness and straightness of tiles
- BS-EN-428 - Resilient floor coverings. Determination of overall thickness
- BS-EN-429 - Resilient floor coverings. Determination of the thickness of layers
- BS-EN-430 - Resilient floor coverings. Determination of mass per unit area
- BS-EN-431 - Resilient floor coverings. Determination of peel resistance
- BS-EN-433 - Resilient floor coverings. Determination of residual indentation after static loading
- BS-EN-434 - Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat
- BS-EN-435 - Resilient floor coverings. Determination of flexibility
- BS-EN-436 - Resilient floor coverings. Determination of density
- BS-EN-548 - Resilient floor coverings. Specification for plain and decorative linoleum
- BS-EN-61340-4-1 - Electrostatics
- BS-EN-61340-4-5 - Electrostatics. Standard test methods for specific applications. Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person
- BS-EN-649 - Resilient floor coverings. Homogenous and heterogenous polyvinyl chloride floor coverings. Specification
- BS-EN-650 - Resilient floor coverings. Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing. Specification
- BS-EN-651 - Resilient floor coverings. Polyvinyl chloride floor coverings with foam layer. Specification
- BS-EN-654 - Resilient floor coverings. Semi-flexible polyvinyl chloride tiles. Specification
- BS-EN-660-1 - Resilient floor coverings. Determination of wear resistance
- BS-EN-660-2 - Resilient floor coverings. Determination of wear resistance
- BS-EN-664 - Resilient floor coverings. Determination of volatile loss
- BS-EN-685 - Resilient, textile and laminate floor coverings. Classification
- BS-EN-686 - Resilient floor coverings. Specification for plain and decorative linoleum on a foam backing
- BS-EN-687 - Resilient floor coverings. Specification for plain and decorative linoleum on a corkment backing
- BS-EN-688 - Resilient floor coverings. Specification for corklinoleum
- BS-EN-984 - Textile floor coverings. Determination of the mass per unit area of the use surface of needled floor coverings
- BS-EN-985 - Textile floor coverings. Castor chair test
- BS-EN-986 - Textile floor coverings. Tiles. Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
- BS-EN-994 - Textile floor coverings. Determination of the side length, squareness and straightness of tiles
- BS-EN-ISO-10580 - Resilient, textile and laminate floor coverings. Test method for volatile organic compound (VOC) emissions
- BS-EN-ISO-10581 - Resilient floor coverings. Homogeneous poly(vinyl chloride) floor covering. Specifications
- BS-EN-ISO-10581-TC - Tracked Changes. Resilient floor coverings. Homogeneous poly(vinyl chloride) floor covering. Specifications
- BS-EN-ISO-10582 - Resilient floor coverings. Heterogeneous poly(vinyl chloride) floor covering. Specifications
- BS-EN-ISO-10595 - Resilient floor coverings. Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles. Specification
- BS-EN-ISO-10833 - Textile floor coverings. Determination of resistance to damage at cut edges using the modified Vettermann drum test
- BS-EN-ISO-10874 - Resilient, textile and laminate floor coverings. Classification
- BS-EN-ISO-11378-2 - Textile floor coverings. Laboratory soiling tests
- BS-EN-ISO-11638 - Resilient floor coverings. Heterogeneous poly(vinyl chloride) flooring on foam. Specification
- BS-EN-ISO-11857 - Textile floor coverings. Determination of resistance to delamination
- BS-EN-ISO-12951 - Textile floor coverings. Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine
- BS-EN-ISO-13894-1 - High-pressure decorative laminates. Composite elements. Test methods
- BS-EN-ISO-13894-2 - High-pressure decorative laminates. Composite elements. Specifications for composite elements with wood-based substrates for interior use
- BS-EN-ISO-16581 - Resilient and laminate floor coverings. Determination of the effect of simulated movement of a furniture leg
- BS-EN-ISO-23996 - Resilient floor coverings. Determination of density
- BS-EN-ISO-23997 - Resilient floor coverings. Determination of mass per unit area
- BS-EN-ISO-23999 - Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat
- BS-EN-ISO-23999-TC - Tracked Changes. Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat
- BS-EN-ISO-24011 - Resilient floor coverings. Specification for plain and decorative linoleum
- BS-EN-ISO-24340 - Resilient floor Coverings. Determination of thickness of layers
- BS-EN-ISO-24341 - Resilient and textile floor coverings. Determination of length, width and straightness of sheet
- BS-EN-ISO-24342 - Resilient and textile floor-coverings. Determination of side length, edge straightness and squareness of tiles
- BS-EN-ISO-24343-1 - Resilient and laminate floor coverings. Determination of indentation and residual indentation
- BS-EN-ISO-24344 - Resilient floor coverings. Determination of flexibility and deflection
- BS-EN-ISO-24345 - Resilient floor coverings. Determination of peel resistance
- BS-EN-ISO-24346 - Resilient floor coverings. Determination of overall thickness
- BS-EN-ISO-26985 - Resilient floor coverings. Identification of linoleum and determination of cement content and ash residue
- BS-EN-ISO-26986 - Resilient floor coverings Expanded (cushioned) poly(vinyl chloride) floor covering Specification
- BS-EN-ISO-26987 - Resilient floor coverings. Determination of staining and resistance to chemicals
- BS-EN-ISO-4918 - Resilient,textile and laminate floor coverings. Castor chair test
- BS-EN-ISO-9239-1 - Reaction to fire tests for floorings
- BS-ISO-10361 - Textile floor coverings. Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester
- BS-ISO-10361-TC - Tracked Changes. Textile floor coverings. Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester
- BS-ISO-10575 - Resilient floor coverings. Specification for rubber sheet floor coverings with backing
- BS-ISO-10577 - Resilient floor coverings. Specification for rubber sheet floor coverings without back
- BS-ISO-10580 - Resilient, Textile & Laminate Floor Coverings, Test Method for Volatile Organic Compou
- BS-ISO-10833 - Textile floor coverings. Determination of resistance to damage at cut edges using the modified Vettermann drum test
- BS-ISO-10874 - Resilient, Textile & Laminate Floor Coverings, Classification
- BS-ISO-11377 - Textile floor coverings. Floor soiling. Test site set-up and soiling evaluation
- BS-ISO-11378-1 - Textile floor coverings. Laboratory soiling tests
- BS-ISO-11379 - Textile floor coverings. Laboratory cleaning procedure using spray extraction
- BS-ISO-11638 - Resilient floor coverings. Heterogeneous poly(vinyl chloride) flooring on foam. Specification
- BS-ISO-11856 - Textile floor coverings. Test methods for the determination of fibre bind using a Modified Martindale Machine
- BS-ISO-11858 - Textile floor coverings. Determination of friability of attached foams
- BS-ISO-11859 - Textile floor coverings. Pure wool, hand-knotted pile carpets. Specification
- BS-ISO-11860 - Textile floor coverings. Jute carpet backing fabric. Specification
- BS-ISO-11861 - Textile floor coverings. Coir mats. Types and specification
- BS-ISO-13746 - Textile floor coverings. Guidelines for installation and use on stairs
- BS-ISO-14486 - Laminate floor coverings. Specification
- BS-ISO-16581 - Resilient and laminate floor coverings. Determination of the effect of simulated movement of a furniture leg
- BS-ISO-16906 - Resilient floor coverings. Determination of seam strength
- BS-ISO-1766 - Textile floor coverings. Determination of thickness of pile above the substrate
- BS-ISO-17984 - Machine-made textile floor coverings. Determination of dimensional changes after exposure to heat and/or water
- BS-ISO-18168 - Textile floor coverings. Colour fastness to shampooing
- BS-ISO-19322 - Resilient floor coverings. Specification for floor coverings based on thermoplastic polymers
- BS-ISO-1957 - Machine-made textile floor coverings. Selection and cutting of specimens for physical tests
- BS-ISO-20251 - Textile floor coverings. Water impermeability test
- BS-ISO-20326 - Resilient floor coverings. Specification for floor panels/assembly for loose laying
- BS-ISO-21629-2 - Bamboo floorings
- BS-ISO-23996 - Resilient Floor Coverings, Determination of Density
- BS-ISO-23997 - Resilient Floor Coverings, Determination of Mass per Unit Area
- BS-ISO-23999 - Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat
- BS-ISO-2424 - Textile floor coverings. Vocabulary
- BS-ISO-24334 - Laminate floor coverings. Determination of locking strength for mechanically assembled panels
- BS-ISO-24335 - Laminate floor coverings. Determination of impact resistance
- BS-ISO-24335-TC - Tracked Changes. Laminate floor coverings. Determination of impact resistance
- BS-ISO-24336 - Laminate floor coverings. Determination of thickness swelling after partial immersion in water
- BS-ISO-24337 - Laminate floor coverings. Determination of geometrical characteristics
- BS-ISO-24338 - Laminate floor coverings. Determination of abrasion resistance
- BS-ISO-24338-TC - Tracked Changes. Laminate floor coverings. Determination of abrasion resistance
- BS-ISO-24339 - Laminate and textile floor coverings. Determination of dimensional variations after exposure to humid and dry climate conditions
- BS-ISO-24340 - Resilient Floor Coverings, Determination of Thickness of Layers
- BS-ISO-24341 - Resilient and textile floor coverings. Determination of length, width and straightness of sheet
- BS-ISO-24342 - Resilient floor-covering tiles. Determination of side length, edge straightness and squareness
- BS-ISO-24343-1 - Resilient & Laminate Floor Coverings, Determination of Indentation & Residual Indentat
- BS-ISO-24343-2 - Resilient and laminate floor coverings. Determination of indentation and residual indentation
- BS-ISO-24343-3 - Resilient and laminate floor coverings. Determination of indentation and residual indentation
- BS-ISO-24344 - Resilient Floor Coverings, Determination of Flexibility & Deflection
- BS-ISO-24346 - Resilient floor coverings. Determination of overall thickness
- BS-ISO-2551 - Textile floor coverings and textile floor coverings in tile form. Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
- BS-ISO-25620 - Laminate floor coverings. Determination of long-side friction for mechanically assembled panels
- BS-ISO-26985 - Resilient Floor Coverings, Identification of Linoleum & Determination of Cement Conten
- BS-ISO-26987 - Resilient floor coverings. Determination of staining and resistance to chemicals
- BS-ISO-4760 - Laminate flooring. Topical moisture resistance. Assembled joint
- BS-ISO-4918 - Resilient, textile and laminate floor coverings. Castor chair test
- BS-ISO-4919 - Carpets. Determination of tuft withdrawal force
- BS-ISO-6347 - Textile floor coverings. Consumer information
- BS-ISO-6356 - Textile and laminate floor coverings. Assessment of static electrical propensity. Walking test
- BS-ISO-8543 - Textile floor coverings. Methods for determination of mass
- BS-ISO-9405 - Textile floor coverings. Assessment of changes in appearance
- BS-ISO/PAS-17984 - Machine-made textile floor coverings. Determination of dimensional changes after exposure to heat and/or water
- DD-CEN-14159 - Textile floor coverings. Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
- DD-CEN-15122 - Surfaces for sports areas. Determination of resistance of synthetic sports surfaces to repeated impact
- DD-CEN-15676 - Wood flooring. Slip resistance. Pendulum test
- DD-CEN-15717 - Parquet flooring. General guideline for installation
- DD-ENV-13696 - Wood and parquet flooring. Determination of elasticity and resistance to wear
- DD-ISO/PAS-11856 - Textile floor coverings. Test methods for the determination of fibre bind
- PAS-86 - Professional inspection, maintenance, cleaning and restoration of textile floor coverings. Code of practice
- PD-CEN-15398 - Resilient, textile and laminate floor coverings. Floor covering standard symbols. Complementary element
- PD-CEN-16354 - Laminate floor coverings. Underlays. Specification, requirements and test methods
- PD-CEN-16641 - Textile floor coverings. Guidelines for acceptable colour deviations
- PD-CEN-16717 - Surface for sports areas. Method of test for the determination of shock absorption, vertical deformation and energy restitution using the advanced artificial athlete
- PD-CEN-17849 - Resilient, textile, laminate and modular mechanical locked floor coverings. Guidance on how to implement EN 14041:2004/AC:2006 under the Construction Products Regulation EU 305/2011 (CPR)
IEC:
- IEC-61340-4-1 - Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors
- IEC-61340-4-1-AM1 - Amendment 1 - Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors
ISO:
- ISO-10361 - Textile floor coverings - Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester
- ISO-10575 - Resilient floor coverings - Specification for rubber sheet floor coverings with backing
- ISO-10577 - Resilient floor coverings - Specification for rubber sheet floor coverings without backing
- ISO-10580 - Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions
- ISO-10581 - Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications
- ISO-10582 - Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor covering - Specifications
- ISO-10595 - Resilient floor coverings - Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles - Specification
- ISO-10833 - Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test
- ISO-10834 - Textile floor coverings -- Non-destructive measurement of pile thickness above the backing -- WRONZ gauge method
- ISO-10874 - Resilient, textile and laminate floor coverings - Classification
- ISO-10874-AM1 - - Amendment 1: Elimination of class 22+
- ISO-10965 - Textile floor coverings - Determination of electrical resistance
- ISO-11377 - Textile floor coverings -- Floor soiling -- Test site set-up and soiling evaluation
- ISO-11378-1 - Textile floor coverings -- Laboratory soiling tests -- Part 1: Kappasoil test
- ISO-11378-2 - Textile floor coverings -- Laboratory soiling tests -- Part 2: Drum test
- ISO-11378-2-AM1 - - Amendment 1
- ISO-11379 - Textile floor coverings - Laboratory cleaning procedure using spray extraction
- ISO-11638 - Resilient floor coverings - Heterogeneous poly(vinyl chloride) flooring on foam - Specification
- ISO-11856 - Textile floor coverings - Test methods for the determination of fibre bind using a Modified Martindale Machine
- ISO-11857 - Textile floor coverings -- Determination of resistance to delamination
- ISO-11858 - Textile floor coverings -- Determination of friability of attached foams
- ISO-11859 - Textile floor coverings -- Pure wool, hand-knotted pile carpets -- Specification
- ISO-11860 - Textile floor coverings -- Jute carpet backing fabric -- Specification
- ISO-11861 - Textile floor coverings -- Coir mats -- Types and specification
- ISO-12951 - Textile floor coverings - Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine
- ISO-13746 - Textile floor coverings -- Guidelines for installation and use on stairs
- ISO-13747 - Textile floor coverings -- Determination of size, squareness and straightness of edge of tiles
- ISO-13750 - Textile floor coverings -- Determination of resistance to staining by acid food colours
- ISO-14486 - Laminate floor coverings - Specification
- ISO-16581 - Resilient and laminate floor coverings - Determination of the effect of simulated movement of a furniture leg
- ISO-16905 - Resilient floor coverings - Specification for rubber floor covering - Tile/Plank
- ISO-16906 - Resilient floor coverings - Determination of seam strength
- ISO-17504 - Textile floor coverings -- Determination of wool fibre integrity using an abrasion machine
- ISO-1763 - Textile floor coverings - Determination of number of tufts and/or loops per unit length and per unit area
- ISO-1765 - Machine-made textile floor coverings -- Determination of thickness
- ISO-1766 - Textile floor coverings -- Determination of thickness of pile above the substrate
- ISO-17984 - Machine-made textile floor coverings - Determination of dimensional changes after exposure to heat and/or water
- ISO-18167 - Textile floor coverings - Installation practices - General
- ISO-18168 - Textile floor coverings - Colour fastness to shampooing
- ISO-19322 - Resilient floor coverings - Specification for floor coverings based on thermoplastic polymers
- ISO-1957 - Machine-made textile floor coverings -- Selection and cutting of specimens for physical tests
- ISO-20251 - Textile floor coverings - Water impermeability test
- ISO-20253 - Textile floor coverings - Blade test - Flocked textile floor covering
- ISO-20326 - Resilient floor coverings - Specification for floor panels/assembly for loose laying
- ISO-20326-AM1 - - Amendment 1: Requirements depending on the substrate
- ISO-2094 - Textile floor coverings -- Determination of thickness loss under dynamic loading
- ISO-21629-1 - Bamboo floorings - Part 1: Indoor use
- ISO-21629-2 - Bamboo floorings - Part 2: Outdoor use
- ISO-21868 - Textile floor coverings - State of the art on maintenance and cleaning
- ISO-23996 - Resilient floor coverings - Determination of density
- ISO-23997 - Resilient floor coverings - Determination of mass per unit area
- ISO-23999 - Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat
- ISO-24011 - Resilient floor coverings - Specification for plain and decorative linoleum
- ISO-2424 - Textile floor coverings - Vocabulary
- ISO-24334 - Laminate floor coverings - Determination of locking strength for mechanically assembled panels
- ISO-24335 - Laminate floor coverings - Determination of impact resistance
- ISO-24336 - Laminate floor coverings - Determination of thickness swelling after partial immersion in water
- ISO-24337 - Laminate floor coverings - Determination of geometrical characteristics
- ISO-24338 - Laminate floor coverings - Determination of abrasion resistance
- ISO-24339 - Laminate and textile floor coverings - Determination of dimensional variations after exposure to humid and dry climate conditions
- ISO-24340 - Resilient floor coverings - Determination of thickness of layers
- ISO-24341 - Resilient and textile floor coverings - Determination of length, width and straightness of sheet
- ISO-24342 - Resilient and textile floor-coverings - Determination of side length, edge straightness and squareness of tiles
- ISO-24342-AM1 - - Amendment 1
- ISO-24343-1 - Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation
- ISO-24343-2 - Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 2: Short-term indentation and residual indentation of resilient floor covering
- ISO-24343-3 - Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 3: Indentation of resilient semi-flexible/vinyl composition tiles
- ISO-24344 - Resilient floor coverings - Determination of flexibility and deflection
- ISO-24345 - Resilient floor coverings - Determination of peel resistance
- ISO-24346 - Resilient floor coverings - Determination of overall thickness
- ISO-2549 - Textile floor coverings -- Hand-knotted carpets -- Determination of tuft leg length above the woven ground
- ISO-2550 - Textile floor coverings -- Hand-made carpets -- Determination of types of knots
- ISO-2551 - Textile floor coverings and textile floor coverings in tile form - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
- ISO-25620 - Laminate floor coverings - Determination of long-side friction for mechanically assembled panels
- ISO-26985 - Resilient floor coverings - Identification of linoleum and determination of cement content and ash residue
- ISO-26986 - Resilient floor coverings - Expanded (cushioned) poly(vinyl chloride) floor covering - Specification
- ISO-26986-AM1 - - Amendment 1: Resilient floor coverings - Expanded (cushioned) poly(vinyl chloride) floor covering - Specification - Amendment 1
- ISO-26987 - Resilient floor coverings - Determination of staining and resistance to chemicals
- ISO-3018 - Textile floor coverings -- Rectangular textile floor coverings -- Determination of dimensions
- ISO-3415 - Textile floor coverings -- Determination of thickness loss after brief, moderate static loading
- ISO-3416 - Textile floor coverings -- Determination of thickness loss after prolonged, heavy static loading
- ISO-4760 - Laminate flooring - Topical moisture resistance - Assembled joint
- ISO-4918 - Resilient, textile and laminate floor coverings - Castor chair test
- ISO-4918-AM1 - - Amendment 1: Surface hardness
- ISO-4919 - Carpets - Determination of tuft withdrawal force
- ISO-5086 - Textile floor coverings -- Hand-knotted carpets -- Sampling and selection of areas of test
- ISO-6347 - Textile floor coverings - Consumer information
- ISO-6356 - Textile and laminate floor coverings - Assessment of static electrical propensity - Walking test
- ISO-6925 - Textile floor coverings - Burning behaviour - Tablet test at ambient temperature
- ISO-8543 - Textile floor coverings - Methods for determination of mass
- ISO-9239-1 - Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source
- ISO-9239-2 - Reaction to fire tests for floorings - Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
- ISO-9405 - Textile floor coverings - Assessment of changes in appearance
- ISO/DIS-24344 - Resilient Floor Coverings - Determination of Flexibility
- ISO/PAS-11856 - Textile floor coverings - Test methods for the determination of fibre bind
- ISO/PAS-17984 - Machine-made textile floor coverings - Determination of dimensional changes after exposure to heat and/or water
- ISO/PAS-18167 - Textile floor coverings - Installation practices - General
Other SDOs:
- BS-EN-17142 - Modular multilayer floor coverings. Elements with a wood powder based surface layer. Specifications, requirements and test methods
- DIN-EN-12229 - Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces; German version EN 12229:2014
- DIN-EN-1307 - Textile floor coverings - Classification; German version EN 1307:2014+A1:2016
- DIN-EN-1318 - Textile Floor Coverings - Determination of the Apparent Effective Thickness of the Bac
- DIN-EN-13329 - Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods; German version EN 13329:2016
- DIN-EN-13553 - Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification; German version EN 13553:2017
- DIN-EN-13672 - Surfaces for Sports Areas, Determination of Resistance To Abrasion of Non-Filled Synth
- DIN-EN-13744 - Surfaces for Sports Areas, Procedure for Accelerated Ageing by Immersion in Hot Water
- DIN-EN-13745 - Surfaces for Sports Areas, Determination of Specular Reflectance
- DIN-EN-13746 - Surfaces for Sports Areas, Determination of Dimensional Changes Due To the Effect of V
- DIN-EN-13817 - Surfaces for Sports Areas, Procedure for Accelerated Ageing by Exposure To Hot Air
- DIN-EN-13845 - Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification; German version EN 13845:2017
- DIN-EN-13864 - Surfaces for Sports Areas, Determination of Tensile Strength of Synthetic Yarns
- DIN-EN-14041 - Resilient, Textile & Laminate Floor Coverings - Essential Characteristics
- DIN-EN-14085 - Resilient floor coverings - Specification for floor panels for loose laying
- DIN-EN-14215 - Textile floor coverings - Classification of machine-made pile rugs and runners; German version EN 14215:2013
- DIN-EN-14499 - Textile floor coverings - Minimum requirements for carpet underlays; German version EN 14499:2015
- DIN-EN-14521 - Resilient Floor Coverings, Specification for Smooth Rubber Floor Coverings With or Wit
- DIN-EN-14565 - Resilient Floor Coverings, Floor Coverings Based Upon Synthetic Thermoplastic Polymers
- DIN-EN-14836 - Synthetic Surfaces for Outdoor Sports Areas - Exposure To Artificial Weathering
- DIN-EN-14837 - Surfaces for Sports Areas - Determination of Slip Resistance
- DIN-EN-14877 - Synthetic surfaces for outdoor sports areas - Specification; German version EN 14877:2013
- DIN-EN-14900 - Textile Floor Coverings - Determination of the Density of the Textile Fleece Backing
- DIN-EN-14978 - Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods; German version EN 14978:2016
- DIN-EN-15114 - Textile floor coverings - Classification of textile floor coverings without pile; German version EN 15114:2006+A1:2008
- DIN-EN-15115 - Textile Floor Coverings - Determination of Sensitivity To Spilled Water
- DIN-EN-1814 - Textile Floor Coverings, Determination of Resistance To Damage at Cut Edges Using The
- DIN-EN-423 - Resilient floor coverings - Determination of resistance to staining
- DIN-EN-548 - Resilient floor coverings - Specification for plain and decorative linoleum
- DIN-EN-685 - Resilient, textile and laminate floor coverings - Classification
- DIN-EN-986 - Textile Floor Coverings - Tiles - Determination of Dimensional Changes Due To the Effe
- EN-12199 - Resilient Floor Coverings - Specifications for Homogeneous & Heterogeneous Relief Rubb
- EN-12229 - Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces
- EN-1269 - Textile floor coverings - Assessment of impregnations in needled floor coverings by means of a soiling test
- EN-1307 - Textile floor coverings - Classification
- EN-1318 - Textile Floor Coverings - Determination of the Apparent Effective Thickness of the Bac
- EN-13297 - Textile floor coverings - Classification of needled pile floor coverings
- EN-13329 - Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
- EN-13553 - Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification
- EN-13672 - Surfaces for Sports Areas, Determination of Resistance To Abrasion of Non-Filled Synth
- EN-13696 - Wood Flooring - Test Methods To Determine Elasticity & Resistance To Wear & Impact Res
- EN-13744 - Surfaces for Sports Areas, Procedure for Accelerated Ageing by Immersion in Hot Water
- EN-13746 - Surfaces for Sports Areas, Determination of Dimensional Changes Due To the Effect of V
- EN-13817 - Surfaces for Sports Areas, Procedure for Accelerated Ageing by Exposure To Hot Air
- EN-13845 - Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification
- EN-13864 - Surfaces for Sports Areas, Determination of Tensile Strength of Synthetic Yarns
- EN-13893 - Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces
- EN-14041 - Resilient, Textile & Laminate Floor Coverings - Essential Characteristics
- EN-14085 - Resilient Floor Coverings - Specification for Floor Panels for Loose Laying
- EN-14159 - Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
- EN-14215 - Textile floor coverings - Classification of machine-made pile rugs and runners
- EN-14342 - Wood flooring - Characteristics, evaluation of conformity and marking
- EN-14499 - Textile floor coverings - Minimum requirements for carpet underlays
- EN-14521 - Resilient Floor Coverings, Specification for Smooth Rubber Floor Coverings With or Wit
- EN-14565 - Resilient Floor Coverings, Floor Coverings Based Upon Synthetic Thermoplastic Polymers
- EN-1470 - Textile Floor Coverings - Classification of Needled Floor Coverings Except for Needled
- EN-14837 - Surfaces for Sports Areas - Determination of Slip Resistance
- EN-14900 - Textile Floor Coverings - Determination of the Density of the Textile Fleece Backing
- EN-14978 - Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
- EN-15114 - Textile Floor Coverings - Classification of Textile Floor Coverings Without Pile
- EN-15115 - Textile Floor Coverings - Determination of Sensitivity To Spilled Water
- EN-15468 - Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods
- EN-15772 - Textile floor coverings - Minimum requirements for needled floor coverings for single usage in events of limited duration
- EN-15825 - Textile Floor Coverings - Classification of Machine-Made Rugs & Runners Without Pile
- EN-16094 - Laminate floor coverings - Test method for the determination of micro-scratch resistance
- EN-16511 - Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer
- EN-16776 - Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification
- EN-16810 - Resilient, textile and laminate floor coverings - Environmental product declarations - Product category rules
- EN-17009 - Flooring of lignified materials other than wood - Characteristics, assessment and verification of constancy of performance and marking
- EN-1814 - Textile Floor Coverings, Determination of Resistance To Damage at Cut Edges Using The
- EN-1815 - Resilient and laminate floor coverings - Assessment of static electrical propensity
- EN-1816 - Resilient Floor Coverings - Specification for Homogeneous & Heterogeneous Smooth Rubb
- EN-1817 - Resilient Floor Coverings - Specification for Homogeneous & Heterogeneous Smooth Rubb
- EN-1910 - Wood flooring and wood panelling and cladding - Determination of dimensional stability
- EN-1963 - Textile floor coverings - Tests using the Lisson Tretrad Machine
- EN-425 - Resilient and laminate floor coverings - Castor chair test
- EN-548 - Resilient floor coverings - Specification for plain and decorative linoleum
- EN-61340-4-1 - Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors
- EN-650 - Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing - Specification
- EN-652 - Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification
- EN-653 - Resilient floor coverings - Expanded (cushioned) polyvinyl chloride floor coverings - Specification
- EN-654 - Resilient floor coverings - Semi-flexible polyvinyl chloride tiles - Specification
- EN-655 - Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification
- EN-660-2 - Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber test
- EN-685 - Resilient, Textile & Laminate Floor Coverings - Classification
- EN-686 - Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing
- EN-687 - Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing
- EN-688 - Resilient floor coverings - Specification for corklinoleum
- EN-986 - Textile Floor Coverings, Tiles, Determination of Dimensional Changes Due To the Effect
- EN-994 - Textile floor coverings - Determination of the side length, squareness and straightness of tiles
- EN-ISO-10580 - Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions
- EN-ISO-10581 - Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2011)
- EN-ISO-10582 - Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor coverings - Specification (ISO 10582:2010)
- EN-ISO-10595 - Resilient floor coverings - Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles - Specification (ISO 10595:2010)
- EN-ISO-10833 - Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test (ISO 10833:2017)
- EN-ISO-10874 - Resilient, textile and laminate floor coverings - Classification
- EN-ISO-11857 - Textile Floor Coverings, Determination of Resistance To Delamination
- EN-ISO-12951 - Textile floor coverings - Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine
- EN-ISO-13894-1 - High-pressure decorative laminates - Composite elements - Part 1: Test methods
- EN-ISO-13894-2 - High-pressure decorative laminates - Composite elements - Part 2 : Specifications for composite elements with wood-based substrates for interior use
- EN-ISO-23997 - Resilient floor coverings - Determination of mass per unit area (ISO 23997:2007)
- EN-ISO-23999 - Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2008)
- EN-ISO-24011 - Resilient floor coverings - Specification for plain and decorative linoleum (ISO 24011:2009)
- EN-ISO-24340 - Resilient floor coverings - Determination of thickness of layers
- EN-ISO-24341 - Resilient and textile floor coverings - Determination of length, width and straightness of sheet (ISO 24341:2006)
- EN-ISO-24342 - Resilient and textile floor-coverings - Determination of side length, edge, straightness and squareness of tiles (ISO 24342:2007)
- EN-ISO-24343-1 - Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007)
- EN-ISO-24344 - Resilient floor coverings - Determination of flexibility and deflection
- EN-ISO-24345 - Resilient floor coverings - Determination of peel resistance (ISO 24345:2006)
- EN-ISO-24346 - Resilient floor coverings - Determination of overall thickness (ISO 24346:2006)
- EN-ISO-26985 - Resilient floor coverings - Identification of linoleum and determination of cement content and ash residue
- EN-ISO-26986 - Resilient floor coverings - Expanded (cushioned) poly(vinyl chloride) floor covering - Specification (ISO 26986:2010)
- EN-ISO-26987 - Resilient floor coverings - Determination of staining and resistance to chemicals (ISO 26987:2008)
- EN-ISO-9239-1 - Reaction To Fire Tests for Floorings, Determination of the Burning Behaviour Using a R
- EN-ISO-9405 - Textile floor coverings - Assessment of changes in appearance
- SIS-CEN/TR-17519 - Surfaces for sports areas - Synthetic turf sports facilities - Guidance on how to minimize infill dispersion into the environment
- SIS-CEN/TS-14472-1 - Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 1: General
- SIS-CEN/TS-14472-2 - Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 2: Textile floor coverings
- SIS-CEN/TS-14472-3 - Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 3: Laminate floor coverings
- SIS-CEN/TS-14472-4 - Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 4: Resilient floor coverings
- SIS-CEN/TS-15122 - Surfaces for sports areas - Determination of resistance of synthetic sports surfaces to repeated impact
- SIS-CEN/TS-15398 - Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element
- SIS-CEN/TS-15676 - Wood flooring - Slip resistance - Pendulum test
- SIS-CEN/TS-16717 - Surface for sports areas - Method of test for the determination of shock absorption, vertical deformation and energy restitution using the advanced artificial athlete
- SIS-ISO/TS-21868 - Textile floor coverings - State of the art and guidance on maintenance and cleaning (ISO/TS 21868:2021)
- SS-EN-1081 - Resilient, laminate and modular multilayer floor coverings - Determination of the electrical resistance
- SS-EN-12103 - Resilient floor coverings - Agglomerated cork underlays - Specification
- SS-EN-12104 - Resilient floor coverings - Cork floor tiles - Specification
- SS-EN-12105 - Resilient floor coverings - Determination of moisture content of agglomerated composition cork
- SS-EN-12199 - Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings
- SS-EN-12229 - Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces
- SS-EN-12235 - Surfaces for sports areas - Determination of vertical ball behaviour
- SS-EN-12455 - Resilient floor coverings - Specification for corkment underlay
- SS-EN-12466 - Resilient floor coverings - Vocabulary
- SS-EN-1269 - Textile floor coverings - Assessment of impregnations in needled floor coverings by means of a soiling test
- SS-EN-12853 - Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements
- SS-EN-1307 - Textile floor coverings - Classification
- SS-EN-13442 - Wood and parquet flooring and wood panelling and cladding - Determination of the resistance to chemical agents
- SS-EN-13553 - Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification
- SS-EN-13672 - Surfaces for sports areas - Determination of resistance to abrasion of non-filled synthetic turf
- SS-EN-13696 - Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance
- SS-EN-13745 - Surfaces for sports areas - Determination of specular reflection
- SS-EN-13746 - Surfaces for sports areas - Determination of dimensional changes due to the effect of varied water, frost and heat conditions
- SS-EN-13845 - Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification
- SS-EN-13893 - Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces
- SS-EN-1399 - Resilient floor coverings - Determination of resistance to stubbed and burning cigarettes
- SS-EN-14041 - Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics
- SS-EN-14085 - Resilient floor coverings - Specification for floor panels for loose laying
- SS-EN-14159 - Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
- SS-EN-14215 - Textile floor coverings - Classification of machine-made rugs and runners
- SS-EN-14342 - Wood flooring - Characteristics, evaluation of conformity and marking
- SS-EN-14521 - Resilient floor coverings - Specification for smooth rubber floor coverings with or without foam backing with a decorative layer
- SS-EN-14565 - Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification
- SS-EN-1471 - Textile floor coverings - Assessment of changes in appearance
- SS-EN-1471-AM1 - Textile floor coverings - Assessment of changes in appearance
- SS-EN-14836 - Surfaces for sports areas - Synthetic surfaces for outdoor sports areas - Test method for artificial weathering
- SS-EN-14837 - Surfaces for sports areas - Determination of slip resistance
- SS-EN-14877 - Synthetic surfaces for outdoor sports areas - Specification
- SS-EN-14900 - Textile floor coverings - Determination of the density of the textile fleece backing
- SS-EN-14978 - Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
- SS-EN-15115 - Textile floor coverings - Determination of sensitivity to spilled water
- SS-EN-1517 - Surfaces for sports areas - Determination of resistance to impact
- SS-EN-15388 - Agglomerated stone - Slabs and cut-to-size products for vanity and kitchen tops
- SS-EN-15398 - Resilient, textile, laminate and modular mechanical locked floor coverings (MMF) - Floor covering standard symbols - Complementary element
- SS-EN-15468 - Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods
- SS-EN-15772 - Textile floor coverings - Minimum requirements for needled floor coverings for single usage in events of limited duration
- SS-EN-16094 - Laminate floor coverings - Test method for the determination of micro-scratch resistance
- SS-EN-16122 - Domestic and non-domestic storage furniture - Test methods for the determination of strength, durability and stability
- SS-EN-16354 - Laminate floor coverings - Underlays - Specification, requirements and test methods
- SS-EN-16511 - Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer
- SS-EN-16641 - Textile floor coverings - Guidelines for acceptable colour deviations
- SS-EN-16776 - Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification
- SS-EN-16810 - Resilient, textile and laminate floor coverings - Environmental product declarations - Product category rules
- SS-EN-17009 - Flooring of lignified materials other than wood - Characteristics, assessment and verification of constancy of performance and marking
- SS-EN-17142 - Modular multilayer floor coverings - Elements with a wood powder based surface layer - Specifications, requirements and test methods
- SS-EN-17243 - Cathodic protection of internal surfaces of metallic tanks, structures, equipment, and piping containing seawater
- SS-EN-17326 - Surfaces for sports areas - Determination of dimensional stability of shock pads used within sports systems
- SS-EN-17539 - Modular mechanical locked floor coverings (MMF) - Determination of geometrical characteristics
- SS-EN-17861 - Resilient, textile, laminate and modular mechanical locked floor coverings - Circular Economy - Terms and definitions
- SS-EN-1815 - Resilient and laminate floor coverings - Assessment of static electrical propensity
- SS-EN-1816 - Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing
- SS-EN-1817 - Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings
- SS-EN-1818 - Resilient floor coverings - Determination of the effect of loaded heavy duty castors
- SS-EN-1910 - Wood flooring and wood panelling and cladding - Determination of dimensional stability
- SS-EN-1969 - Surfaces for sports areas - Determination of thickness of synthetic sports surfaces
- SS-EN-548 - Resilient floor coverings - Specification for plain and decorative linoleum
- SS-EN-649 - Resilient floor coverings - Homogenous and heterogenous polyvinyl chloride floor coverings - Specification
- SS-EN-650 - Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing - Specification
- SS-EN-651 - Resilient floor coverings - Polyvinyl chloride floor coverings with foam layer - Specification
- SS-EN-652 - Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification
- SS-EN-653 - Resilient floor coverings - Expanded (cushioned) polyvinyl chloride floor coverings - Specification
- SS-EN-654 - Resilient floor coverings - Semi-flexible polyvinyl chloride tiles - Specification
- SS-EN-655 - Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification
- SS-EN-660-1 - Resilient floor coverings - Determination of wear resistance - Part 1: Stuttgart test
- SS-EN-660-1-AM1 - Resilient floor coverings - Determination of wear resistance - Part 1: Stuttgart test
- SS-EN-660-2 - Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber test
- SS-EN-660-2-AM1 - Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber test
- SS-EN-669 - Resilient floor coverings - Determination of dimensional stability of linoleum tiles caused by changes in atmospheric humidity
- SS-EN-670 - Resilient floor coverings - Identification of linoleum and determination of cement content and ash residue
- SS-EN-685 - Resilient, textile and laminate floor coverings - Classification
- SS-EN-685-AM1 - Resilient floor coverings - Classification
- SS-EN-686 - Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing
- SS-EN-687 - Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing
- SS-EN-688 - Resilient floor coverings - Specification for corklinoleum
- SS-EN-709 - Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety
- SS-EN-984 - Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings
- SS-EN-985 - Textile floor coverings - Castor chair test
- SS-EN-986 - Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
- SS-EN-995 - Textile floor coverings - Assessment of the creepof the backings
- SS-EN-ISO-10580 - Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions (ISO 10580:2010)
- SS-EN-ISO-10581 - Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2019)
- SS-EN-ISO-10582 - Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10582:2017)
- SS-EN-ISO-10595 - Resilient floor coverings - Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles - Specification (ISO 10595:2010)
- SS-EN-ISO-10833 - Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test (ISO 10833:2017)
- SS-EN-ISO-10874 - Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)
- SS-EN-ISO-10874-AM1 - Resilient, textile and laminate floor coverings - Classification - Amendment 1: Elimination of class 22+ (ISO 10874:2009/Amd 1:2020)
- SS-EN-ISO-11378-2 - Textile floor coverings - Laboratory soiling tests - Part 2: Drum test (ISO 11378-2:2001)
- SS-EN-ISO-11378-2-AM1 - Textile floor coverings - Laboratory soiling tests - Part 2: Drum test - Amendment 1 (ISO 11378-2:2001/Amd 1:2017)
- SS-EN-ISO-11638 - Resilient floor coverings - Heterogeneous poly(vinyl chloride) flooring on foam - Specification (ISO 11638:2020, including corrected version 2021-09)
- SS-EN-ISO-11857 - Textile floor coverings - Determination of resistance to delamination (ISO 11857:1999)
- SS-EN-ISO-12951 - Textile floor coverings - Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine (ISO 12951:2020)
- SS-EN-ISO-13894-1 - High-pressure decorative laminates - Composite elements - Part 1: Test methods (ISO 13894-1:2000)
- SS-EN-ISO-13894-2 - High-pressure decorative laminates - Composite elements - Part 2 : Specifications for composite elements with wood-based substrates for interior use (ISO 13894-2:2005)
- SS-EN-ISO-16581 - Resilient and laminate floor coverings - Determination of the effect of simulated movement of a furniture leg (ISO 16581:2014)
- SS-EN-ISO-17263 - Intelligent transport systems - Automatic vehicle and equipment identification - System parameters (ISO 17263:2012)
- SS-EN-ISO-20326 - Resilient floor coverings - Specification for floor panels/assembly for loose laying (ISO 20326:2016)
- SS-EN-ISO-20326-AM1 - Resilient floor coverings - Specification for floor panels/assembly for loose laying - Amendment 1: Requirements depending on the substrate (ISO 20326:2016/Amd 1:2020)
- SS-EN-ISO-23996 - Resilient floor coverings - Determination of density (ISO 23996:2007)
- SS-EN-ISO-23997 - Resilient floor coverings - Determination of mass per unit area (ISO 23997:2007)
- SS-EN-ISO-23999 - Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2021)
- SS-EN-ISO-24011 - Resilient floor coverings - Specification for plain and decorative linoleum (ISO 24011:2009)
- SS-EN-ISO-24340 - Resilient floor coverings - Determination of thickness of layers (ISO 24340:2006)
- SS-EN-ISO-24341 - Resilient and textile floor coverings - Determination of length, width and straightness of sheet (ISO 24341:2006)
- SS-EN-ISO-24342 - Resilient and textile floor-coverings - Determination of side length, edge straightness and squareness of tiles (ISO 24342:2018)
- SS-EN-ISO-24342-AM1 - Resilient and textile floor-coverings - Determination of side length, edge straightness and squareness of tiles - Amendment 1 (ISO 24342:2007/Amd 1:2012)
- SS-EN-ISO-24343-1 - Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007)
- SS-EN-ISO-24344 - Resilient floor coverings - Determination of flexibility and deflection (ISO 24344:2008)
- SS-EN-ISO-24345 - Resilient floor coverings - Determination of peel resistance (ISO 24345:2006)
- SS-EN-ISO-24346 - Resilient floor coverings - Determination of overall thickness (ISO 24346:2006)
- SS-EN-ISO-26985 - Resilient floor coverings - Identification of linoleum and determination of cement content and ash residue (ISO 26985:2008)
- SS-EN-ISO-26986 - Resilient floor coverings - Expanded (cushioned) poly(vinyl chloride) floor covering - Specification (ISO 26986:2010)
- SS-EN-ISO-26986-AM1 - Resilient floor coverings - Expanded (cushioned) poly(vinyl chloride) floor covering - Specification - Amendment 1 (ISO 26986:2010/Amd 1:2022)
- SS-EN-ISO-26987 - Resilient floor coverings - Determination of staining and resistance to chemicals (ISO 26987:2008)
- SS-EN-ISO-4918 - Resilient,textile and laminate floor coverings - Castor chair test (ISO 4918:2016, including Amd 1:2018)
- SS-EN-ISO-9239-1 - Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
- SS-EN-ISO-9405 - Textile floor coverings - Assessment of changes in appearance (ISO 9405:2015)
- SS-ISO-1021 - Aircraft - Engine nacelle fire extinguisher apertures and doors
- SS-ISO-10965 - Textile floor coverings - determination of electrical resistance (ISO 10965: 2011, IDT)
- SS-ISO-1765 - Machine-made textile floor coverings - Determination of thickness
- SS-ISO-22932-2 - Mining - Vocabulary - Part 2: Geology (ISO 22932-2:2020, IDT)
- SS-ISO-24336 - Laminate floor coverings - Determination of thickness swelling after partial immersion in water (ISO 24336:2005, IDT)
- SS-ISO-3415 - Textile floor coverings - Determination of thickness loss after brief, moderate static loading
- SS-ISO-3416 - Textile floor coverings - Determination of thickness loss after prolonged, heavy static loading
- SS-ISO-4760 - Laminate Flooring: Topical Moisture Resistance Assembled Joint (ISO 4760:2022, IDT)
- UNE-EN-1307 - Textile floor coverings - Classification
- UNE-EN-13553 - Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification
- UNE-EN-14159 - Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
- UNE-EN-14499 - Textile floor coverings - Minimum requirements for carpet underlays
- UNE-EN-ISO-13894-1 - High-pressure decorative laminates - Composite elements - Part 1: Test methods
- UNE-EN-ISO-13894-2 - High-pressure decorative laminates - Composite elements - Part 2 : Specifications for composite elements with wood-based substrates for interior use