15.01: Refractories, Activated Carbon; Advanced Ceramics
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-C1054 - Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
- ASTM-C107 - Method of Panel Spalling Testing High-Duty Fireclay Brick (Withdrawn 1994)
- ASTM-C1070 - Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
- ASTM-C108 - Standard Symbols for Heat Transmission
- ASTM-C1095 - Practice for Calculating Precision Data on Refractories (C08) From Interlaboratory Test Results (Withdrawn 1998)
- ASTM-C1099 - Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
- ASTM-C1100 - Standard Test Method for Ribbon Thermal Shock Testing of Refractory Materials (Withdrawn 2005)
- ASTM-C1113 - Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
- ASTM-C113 - Standard Test Method for Reheat Change of Refractory Brick
- ASTM-C1145 - Standard Terminology of Advanced Ceramics
- ASTM-C1161 - Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM-C1171 - Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
- ASTM-C1175 - Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics (Withdrawn 2018)
- ASTM-C1190 - Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
- ASTM-C1198 - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
- ASTM-C1211 - Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
- ASTM-C1212 - Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids (Withdrawn 2018)
- ASTM-C122 - Test Method for Panel Spalling Testing Super-Duty Fireclay Brick (Withdrawn 1994)
- ASTM-C1223 - Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
- ASTM-C1239 - Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
- ASTM-C1251 - Standard Guide for Determination of Specific Surface Area of Advanced Ceramic Materials by Gas Adsorption (Withdrawn 2000)
- ASTM-C1259 - Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
- ASTM-C1273 - Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
- ASTM-C1274 - Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
- ASTM-C1275 - Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
- ASTM-C1276 - Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer (Withdrawn 2009)
- ASTM-C1282 - Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation (Withdrawn 2014)
- ASTM-C1286 - Standard Classification for Advanced Ceramics (Withdrawn 2002)
- ASTM-C1291 - Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
- ASTM-C1292 - Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
- ASTM-C1322 - Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
- ASTM-C1323 - Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
- ASTM-C1326 - Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
- ASTM-C1327 - Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
- ASTM-C133 - Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
- ASTM-C1331 - Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
- ASTM-C1332 - Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
- ASTM-C1336 - Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions (Withdrawn 2018)
- ASTM-C1337 - Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
- ASTM-C134 - Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
- ASTM-C1341 - Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
- ASTM-C135 - Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
- ASTM-C1358 - Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures
- ASTM-C1359 - Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
- ASTM-C1360 - Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
- ASTM-C1361 - Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
- ASTM-C1366 - Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
- ASTM-C1368 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature
- ASTM-C1407 - Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
- ASTM-C1419 - Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young’s Modulus
- ASTM-C1421 - Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
- ASTM-C1424 - Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
- ASTM-C1425 - Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
- ASTM-C1444 - Standard Test Method for Measuring the Angle of Repose of Free-Flowing Mold Powders (Withdrawn 2005)
- ASTM-C1445 - Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
- ASTM-C1446 - Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
- ASTM-C1465 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
- ASTM-C1468 - Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
- ASTM-C1469 - Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
- ASTM-C1470 - Standard Guide for Testing the Thermal Properties of Advanced Ceramics
- ASTM-C1494 - Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
- ASTM-C1495 - Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
- ASTM-C1499 - Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM-C1525 - Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
- ASTM-C154 - Test Method for Warpage of Refractory Brick and Tile, or Deviation From Plane Surface (Withdrawn 1984)
- ASTM-C1547 - Standard Classification for Fusion-Cast Refractory Blocks and Shapes
- ASTM-C1548 - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration
- ASTM-C155 - Standard Classification of Insulating Firebrick
- ASTM-C1557 - Standard Test Method for Tensile Strength and Young's Modulus of Fibers
- ASTM-C1576 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
- ASTM-C16 - Standard Test Method for Load Testing Refractory Shapes at High Temperatures
- ASTM-C162 - Standard Terminology of
Glass and Glass Products - ASTM-C1624 - Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
- ASTM-C1655 - Standard Classification of Fireclay and High-Alumina Mortars
- ASTM-C1656 - Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
- ASTM-C1674 - Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
- ASTM-C1678 - Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
- ASTM-C1683 - Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
- ASTM-C1684 - Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
- ASTM-C1730 - Standard Test Method for Particle Size Distribution of Advanced Ceramics by X-Ray Monitoring of Gravity Sedimentation
- ASTM-C1773 - Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
- ASTM-C1783 - Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications
- ASTM-C179 - Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
- ASTM-C1793 - Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications
- ASTM-C180 - Method of Panel Spalling Testing Fireclay Plastic Refractories (Withdrawn 1984)
- ASTM-C181 - Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics
- ASTM-C1819 - Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
- ASTM-C182 - Standard Test Method for Thermal Conductivity of Insulating Firebrick
- ASTM-C1834 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures
- ASTM-C1835 - Standard Classification for Fiber Reinforced Silicon Carbide-Silicon Carbide (SiC-SiC) Composite Structures
- ASTM-C1836 - Standard Classification for Fiber Reinforced Carbon-Carbon Composite Structures
- ASTM-C1862 - Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
- ASTM-C1863 - Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
- ASTM-C1869 - Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites
- ASTM-C1899 - Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
- ASTM-C198 - Standard Test Method for Cold Bonding Strength of Refractory Mortar
- ASTM-C199 - Standard Test Method for Pier Test for Refractory Mortars
- ASTM-C20 - Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
- ASTM-C201 - Standard Test Method for Thermal Conductivity of Refractories
- ASTM-C202 - Standard Test Method for Thermal Conductivity of Refractory Brick
- ASTM-C210 - Standard Test Method for Reheat Change of Insulating Firebrick
- ASTM-C24 - Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials
- ASTM-C27 - Standard Classification of Fireclay and High-Alumina Refractory Brick
- ASTM-C288 - Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
- ASTM-C316 - Classification of Single-And Double-Screened Ground Refractory Materials (Withdrawn 1985)
- ASTM-C357 - Standard Test Method for Bulk Density of Granular Refractory Materials
- ASTM-C38 - Method for Panel Spalling Testing Refractory Brick (Withdrawn 1994)
- ASTM-C401 - Standard Classification of Alumina and Alumina-Silicate Castable Refractories
- ASTM-C416 - Standard Classification of Silica Refractory Brick
- ASTM-C417 - Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
- ASTM-C435 - Standard Classification of Steel Pouring Pit Fireclay Refractories (Withdrawn 2001)
- ASTM-C436 - Method of Test for Reheat Change of Carbon Refractory Brick and Shapes (Withdrawn 1988)
- ASTM-C439 - Method of Test for Resistance to Thermal Spalling of Silica Brick
- ASTM-C454 - Standard Test Method for Disintegration of Carbon Refractories by Alkali
- ASTM-C455 - Standard Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick
- ASTM-C456 - Standard Test Method for Hydration Resistance of Basic Bricks and Shapes
- ASTM-C467 - Standard Classification of Mullite Refractories
- ASTM-C468 - Classification of Granular Refractory Dolomite (Withdrawn 1983)
- ASTM-C491 - Test Method for Modulus of Rupture of Air-Setting Plastic Refractories (Withdrawn 1992)
- ASTM-C492 - Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
- ASTM-C493 - Standard Test Method for Bulk Density and Porosity of Granular Refractory Materials by Mercury Displacement (Withdrawn 2002)
- ASTM-C544 - Standard Test Method for Hydration of Dead-Burned Magnesite or Periclase Grain
- ASTM-C545 - Standard Classification of Zircon Refractories
- ASTM-C546 - Method of Load Testing Refractory Brick at High Temperatures, Long Time (Withdrawn 1984)
- ASTM-C577 - Standard Test Method for Permeability of Refractories
- ASTM-C583 - Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
- ASTM-C604 - Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
- ASTM-C605 - StandardTest Method for Reheat Change of Fireclay Nozzles and Sleeves (Withdrawn 1997)
- ASTM-C606 - Method of Test for Lap-Joint Strength of Refractory Mortars at Elevated Temperatures (Withdrawn 1987)
- ASTM-C607 - Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
- ASTM-C620 - Test Method for Hydration Resistance of Pitch-Bearing Basic Refractory Brick (Withdrawn 1996)
- ASTM-C621 - Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
- ASTM-C622 - Standard Test Method for Corrosion Resistance of Refractories to Molten Glass Using the Basin Furnace (Withdrawn 2000)
- ASTM-C626 - Methods for Estimating the Thermal Neutron Absorption Cross Section of Nuclear Graphite (Withdrawn 1984)
- ASTM-C673 - Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
- ASTM-C704 - Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
- ASTM-C71 - Standard Terminology Relating to Refractories
- ASTM-C767 - Standard Test Method for Thermal Conductivity of Carbon Refractories
- ASTM-C768 - Standard Practice for Drip Slag Testing Refractory Materials at High Temperature (Withdrawn 2004)
- ASTM-C819 - Test Method for Specific Surface Area of Carbon or Graphite (Withdrawn 1987)
- ASTM-C830 - Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
- ASTM-C831 - Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
- ASTM-C832 - Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
- ASTM-C860 - Standard Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
- ASTM-C861 - Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
- ASTM-C862 - Standard Practice for Preparing Refractory Concrete Specimens by Casting
- ASTM-C863 - Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
- ASTM-C865 - Standard Practice for Firing Refractory Concrete Specimens
- ASTM-C874 - Standard Test Method for Rotary Slag Testing of Refractory Materials (Withdrawn 2020)
- ASTM-C885 - Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance
- ASTM-C899 - Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials
- ASTM-C903 - Standard Practice for Preparing Refractory Specimens by Cold Gunning
- ASTM-C909 - Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
- ASTM-C914 - Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
- ASTM-C92 - Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
- ASTM-C93 - Test Methods for Cold Crushing Strength and Modulus of Rupture of Insulating Firebrick (Withdrawn 1992)
- ASTM-C973 - Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
- ASTM-C974 - Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
- ASTM-C975 - Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
- ASTM-C987 - Standard Test Method for Vapor Attack on Refractories for Furnace Superstructures
- ASTM-D2004 - Method of Test for Modulus of Rupture of Petroleum Wax (Withdrawn 1983)
- ASTM-D2618 - Method of Test for Pressure Blocking and Picking Points of Petroleum Wax (Withdrawn 1983)
- ASTM-D2652 - Standard Terminology Relating to Activated Carbon
- ASTM-D2854 - Standard Test Method for Apparent Density of Activated Carbon
- ASTM-D2862 - Standard Test Method for Particle Size Distribution of Granular Activated Carbon
- ASTM-D2866 - Standard Test Method for Total Ash Content of Activated Carbon
- ASTM-D2867 - Standard Test Methods for Moisture in Activated Carbon
- ASTM-D3379 - Standard Test Method for Tensile Strength and Young's Modulus for High-Modulus Single-Filament Materials (Withdrawn 1998)
- ASTM-D3466 - Standard Test Method for Ignition Temperature of Granular Activated Carbon
- ASTM-D3467 - Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon
- ASTM-D3802 - Standard Test Method for Ball-Pan Hardness of Activated Carbon
- ASTM-D3803 - Standard Test Method for Nuclear-Grade Activated Carbon
- ASTM-D3838 - Standard Test Method for pH of Activated Carbon
- ASTM-D3860 - Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
- ASTM-D3922 - Practice for Estimating the Operating Performance of Granular Activated Carbon for Removal of Soluble Pollutants from Water (Withdrawn 1998)
- ASTM-D4069 - Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams
- ASTM-D4607 - Standard Test Method for Determination of Iodine Number of Activated Carbon
- ASTM-D5020 - Test Method for Chlorofluorocarbon Activity of Activated Carbon (Withdrawn 1994)
- ASTM-D5029 - Standard Test Method for Water Solubles in Activated Carbon
- ASTM-D5158 - Standard Test Method for Determination of Particle Size of Fine Mesh and Powdered Activated Carbon by Air-Jet Sieving
- ASTM-D5159 - Standard Guide for Dusting Attrition of Granular Activated Carbon
- ASTM-D5160 - Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon
- ASTM-D5228 - Standard Test Method for Determination of Butane Working Capacity of Activated Carbon
- ASTM-D5742 - Standard Test Method for Determination of Butane Activity of Activated Carbon
- ASTM-D5832 - Standard Test Method for Volatile Matter Content of Activated Carbon Samples
- ASTM-D5919 - Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
- ASTM-D6385 - Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing
- ASTM-D6586 - Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests
- ASTM-D6646 - Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
- ASTM-D6647 - Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption
- ASTM-D6781 - Standard Guide for Carbon Reactivation
- ASTM-D6851 - Standard Test Method for Determination of Contact pH with Activated Carbon
- ASTM-D7385 - Standard Guide for Estimating Carbon Saturation by Temperature Rise Upon Immersion
- ASTM-D8176 - Standard Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh)
- ASTM-F535 - Specification for Electrical Performance Characteristics of Vacuum Cleaners