Document Center List of Standards on Management Of Human Resources Including Staff Training, Staff Responsibilities, Staff Qualifications And Certification Welders' Qualifications, See 25.160.01
ICS Code 03.100.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1490 - Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel
- ASTM-C986 - Standard Guide for Developing Training Programs in the Nuclear Fuel Cycle (Withdrawn 2001)
- ASTM-D5829 - Standard Guide for Preparing a Training Program for Environmental Analytical Laboratories (Withdrawn 2015)
- ASTM-E2159 - Standard Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical Experts
- ASTM-E2162 - Standard Guide for Minimum Continuing Education of Individuals Involved in Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders (Withdrawn 2016)
- ASTM-E2163 - Standard Guide for Minimum Training Requirements for Examiners Conducting Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders in Treatment, Probation or Other Similar Programs (Withdrawn 2023)
- ASTM-E2350 - Standard Guide for Integration of Ergonomics/Human Factors into New Occupational Systems
- ASTM-E2378 - Standard Practice for the Recognition of Impaired or Retired Property Assets
- ASTM-E2379 - Standard Practice for Property Management for Career Development and Training (Withdrawn 2013)
- ASTM-E2678 - Standard Guide for Education and Training in Computer Forensics (Withdrawn 2023)
- ASTM-E2691 - Standard Practice for Job Productivity Measurement
- ASTM-E2708 - Standard Terminology for Accreditation and Certification
- ASTM-E2917 - Standard Practice for Forensic Science Practitioner Training, Continuing Education, and Professional Development Programs
- ASTM-E929 - Standard Test Method for Measuring Electrical Energy Requirements of Processing Equipment (Withdrawn 2014)
- ASTM-F1329 - Standard Guide for Training the Emergency Medical Technician (Basic) in Basic Anatomy and Physiology (Withdrawn 2006)
- ASTM-F1651 - Standard Guide for Training the Emergency Medical Technician (Paramedic) (Withdrawn 2018)
- ASTM-F1654 - Standard Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triage in a Prehospital Environment
- ASTM-F1655 - Standard Guide for Training First Responders Who Practice in Wilderness, Delayed, or Prolonged Transport Settings (Withdrawn 2022)
- ASTM-F1705 - Standard Guide for Training Emergency Medical Services Ambulance Operations
- ASTM-F2209 - Standard Guide for Training of Land Search Team Member
- ASTM-F2662 - Standard Guide for Minimum Training of Dispatchers and Telecommunicators of SAR Incidents
- ASTM-F2852 - Standard Practice for Training a Land Search Tracker
- ASTM-F3024 - Standard Guide for Training of a Land Search and Rescue (SAR) Strike Team/Task Force Leader
- ASTM-F3027 - Standard Guide for Training of Personnel Operating in Mountainous Terrain (Mountain Endorsement)
- ASTM-F3028 - Standard Guide for Training of Search and Rescue Personnel Operating in the Alpine Environment (Alpine Endorsement)
- ASTM-F3068 - Standard Guide for Contents and Use of a Position Task Book (PTB)
- ASTM-F3175 - Standard Guide for Training and Equipping Search and Rescue Personnel Operating on Mountain Bikes (Mountain Bike SAR Endorsement)
- ASTM-F3193 - Standard Guide for Training of a Land Search and Rescue Team Leader
- ASTM-F3194 - Standard Guide for Training for Personnel Operating Small Land Off Road Vehicles (ATV-ROHV Ops Endorsement)
- ASTM-F3221 - Standard Guide for Training for Snowmobile Operator’s Endorsement
- ASTM-F3330 - Standard Specification for Training and the Development of Training Manuals for the UAS Operator
BSI:
- BIP-0011 - Privacy in E-Business. Promoting respect, trust and confidence in your organization
- BIP-0027 - Moving to Mobility. Creating a Successful Remote Work Environment
- BS-30416 - Menstruation, menstrual health and menopause in the workplace. Guide
- BS-6264 - Guide to procedure for operator training for earth-moving machinery
- BS-7513 - General criteria for certification bodies operating certification of personnel
- BS-76000 - Human resource. Valuing people. Management system. Requirements and guidance
- BS-76005 - Valuing people through diversity and inclusion. Code of practice for organizations
- BS-7960 - Door supervision. Code of practice
- BS-8406 - Event stewarding. Code of practice
- BS-8406-TC - Tracked Changes. Event stewarding. Code of practice
- BS-8541-1 - Library objects for architecture, engineering and construction
- BS-8877 - Online recruitment. Code of practice
- BS-EN-15565 - Tourism services. Requirements for the provision of professional tourist guide training and qualification programmes
- BS-EN-15628 - Maintenance. Qualification of maintenance personnel
- BS-EN-15628-TC - Tracked Changes. Maintenance. Qualification of maintenance personnel
- BS-EN-1591-4 - Flanges and their joints
- BS-EN-16736 - Health risk assessment of chemicals. Requirements for the provision of training
- BS-EN-16872 - Services of Medical Doctors with additional qualification in Homeopathy (MDQH). Requirements for health care provision by Medical Doctors with additional qualification in Homeopathy
- BS-EN-17748-1 - Foundational Body of Knowledge for the ICT Profession (ICT BoK)
- BS-EN-4179 - Aerospace series. Qualification and approval of personnel for non-destructive testing
- BS-EN-473 - Non-destructive testing. Qualification and certification of NDT personnel. General principles
- BS-EN-ISO-13293 - Recreational diving services. Requirements for gas blender training programmes
- BS-EN-ISO-18490 - Non-destructive Testing. Evaluation of vision acuity of NDT personnel
- BS-EN-ISO-22712 - Refrigerating systems and heat pumps. Competence of personnel
- BS-EN-ISO-22712-TC - Tracked Changes. Refrigerating systems and heat pumps. Competence of personnel
- BS-EN-ISO-23133 - Nuclear criticality safety. Nuclear criticality safety training for operations.
- BS-EN-ISO-24806 - Recreational diving services. Requirements for rebreather diver training. Decompression diving to 60 m
- BS-EN-ISO-24807 - Recreational diving services. Requirements for rebreather diver training. Decompression diving to 100 m
- BS-EN-ISO-24808 - Recreational diving services. Requirements for rebreather instructor training
- BS-EN-ISO-8586 - Sensory analysis. Selection and training of sensory assessors
- BS-EN-ISO-8586-2 - Sensory analysis. General guidance for the selection, training and monitoring of assessors
- BS-EN-ISO-8586-TC - Tracked Changes. Sensory analysis. Selection and training of sensory assessors
- BS-EN-ISO-8804-1 - Requirements for the training of scientific divers
- BS-EN-ISO-8804-2 - Requirements for the training of scientific divers
- BS-EN-ISO-8804-3 - Requirements for the training of scientific divers
- BS-EN-ISO-9606-1 - Qualification testing of welders. Fusion welding
- BS-EN-ISO-9712 - Non-destructive testing. Qualification and certification of NDT personnel
- BS-EN-ISO-9712 EXCOMM - Non-destructive testing. Qualification and certification of NDT personnel
- BS-EN-ISO-9712-TC - Tracked Changes. Non-destructive testing. Qualification and certification of NDT personnel
- BS-EN-ISO/ASTM-52926-1 - Additive manufacturing of metals. Qualification principles
- BS-EN-ISO/ASTM-52926-2 - Additive manufacturing of metals. Qualification principles
- BS-EN-ISO/ASTM-52926-3 - Additive manufacturing of metals. Qualification principles
- BS-EN-ISO/ASTM-52926-4 - Additive manufacturing of metals. Qualification principles
- BS-EN-ISO/ASTM-52926-5 - Additive manufacturing of metals. Qualification principles
- BS-EN-ISO/ASTM-52942 - Additive manufacturing. Qualification principles. Qualifying machine operators of laser metal powder bed fusion machines and equipment used in aerospace applications
- BS-EN-ISO/IEC19788-1 - Information technology. Learning, education and training. Metadata for learning resources
- BS-EN-ISO/IEC19788-2 - Information technology. Learning, education and training. Metadata for learning resources
- BS-EN-ISO/IEC19788-3 - Information technology. Learning, education and training. Metadata for learning resources
- BS-EN-ISO/IEC19788-5 - Information technology. Learning, education and training. Metadata for learning resources
- BS-EN-ISO/IEC19796-1 - Information technology. Learning, education and training. Quality management, assurance and metrics
- BS-ISO-10018 - Quality management. Guidance for people engagement
- BS-ISO-10019 - Guidelines for the selection of quality management system consultants and use of their services
- BS-ISO-11484 - Steel products. Employer's qualification system for non-destructive testing (NDT) personnel
- BS-ISO-13300-1 - Sensory analysis. General guidance for the staff of a sensory evaluation laboratory
- BS-ISO-13300-2 - Sensory analysis. General guidance for the staff of a sensory evaluation laboratory
- BS-ISO-13970 - Recreational diving services. Requirements for the training of recreational snorkelling guides
- BS-ISO-18436-1 - Condition monitoring and diagnostics of machine systems. Requirements for certification of personnel
- BS-ISO-18436-2 - Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel
- BS-ISO-18436-3 - Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel
- BS-ISO-18436-4 - Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel
- BS-ISO-18436-5 - Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel
- BS-ISO-18436-6 - Condition monitoring and diagnostics of machines. Requirements for certification of personnel
- BS-ISO-18436-6-TC - Tracked Changes. Condition monitoring and diagnostics of machines. Requirements for certification of personnel
- BS-ISO-18436-7 - Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel
- BS-ISO-18436-8 - Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel
- BS-ISO-18878 - Mobile elevating work platforms. Operator (driver) training
- BS-ISO-22935-1 - Milk and milk products. Sensory analysis
- BS-ISO-22935-1-TC - Tracked Changes. Milk and milk products. Sensory analysis
- BS-ISO-23133 - Nuclear criticality safety. Nuclear criticality safety training for operations
- BS-ISO-23326 - Human resource management. Employee engagement. Guidelines
- BS-ISO-23665 - Unmanned aircraft systems. Training for personnel involved in UAS operations
- BS-ISO-23665-TC - Tracked Changes. Unmanned aircraft systems. Training for personnel involved in UAS operations
- BS-ISO-23676 - Rough-terrain trucks. Operator training. Content and methods
- BS-ISO-23678-1 - Ships and marine technology. Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear
- BS-ISO-23678-1-TC - Tracked Changes. Ships and marine technology. Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear
- BS-ISO-23678-2 - Ships and marine technology. Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear
- BS-ISO-23678-2-TC - Tracked Changes. Ships and marine technology. Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear
- BS-ISO-23678-3 - Ships and marine technology. Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear
- BS-ISO-23678-3-TC - Tracked Changes. Ships and marine technology. Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear
- BS-ISO-23678-4 - Ships and marine technology. Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear
- BS-ISO-23678-4-TC - Tracked Changes. Ships and marine technology. Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear
- BS-ISO-23684 - Road vehicles. Technical personnel dealing with natural gas vehicles (NGVs). Training and qualification
- BS-ISO-23814 - Cranes. Competency requirements for crane inspectors
- BS-ISO-23853 - Cranes. Training of slingers and signallers
- BS-ISO-24671 - Road vehicles. Qualification and certification of technical personnel dealing with natural gas vehicles (NGVs)
- BS-ISO-25550 - Ageing societies. General requirements and guidelines for an age-inclusive workforce
- BS-ISO-25551 - Ageing societies. General requirements and guidelines for carer-inclusive organizations
- BS-ISO-30400 - Human resource management. Vocabulary
- BS-ISO-30400-TC - Tracked Changes. Human resource management - Vocabulary
- BS-ISO-30401 - Knowledge management systems. Requirements
- BS-ISO-30405 - Human resource management. Guidelines on recruitment
- BS-ISO-30405-TC - Tracked Changes. Human resource management. Guidelines on recruitment
- BS-ISO-30407 - BS ISO/TS 30407 Human resource management - Cost-per-Hire
- BS-ISO-30408 - Human resource management. Guidelines on human governance
- BS-ISO-30409 - Human resource management. Workforce planning
- BS-ISO-30414 - Human resource management. Guidelines for internal and external human capital reporting
- BS-ISO-30415 - Human resource management. Diversity and inclusion
- BS-ISO-30422 - Human resource management. Learning and development
- BS-ISO-30422-TC - Tracked Changes. Human resource management. Learning and development
- BS-ISO-30434 - Human resource management. Workforce allocation
- BS-ISO-5496 - Sensory analysis. Methodology. Initiation and training of assessors in the detection and recognition of odours
- BS-ISO-7130 - Earth-moving machinery. Operator training. Content and methods
- BS-ISO-8586 - Sensory analysis. General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors
- BS-ISO-8655-10 - Piston-operated volumetric apparatus
- BS-ISO-9926-3 - Cranes. Training of operators
- BS-ISO-9926-3-TC - Tracked Changes. Cranes. Training of operators
- BS-ISO/IEC-19479 - Information technology for learning, education, and training. Learner mobility achievement information (LMAI)
- BS-ISO/IEC-19778-1 - Information technology. Learning, education and training. Collaborative technology. Collaborative workplace
- BS-ISO/IEC-19778-2 - Information technology. Learning, education and training. Collaborative technology. Collaborative workplace
- BS-ISO/IEC-19778-3 - Information technology. Learning, education and training. Collaborative technology. Collaborative workplace
- BS-ISO/IEC-19780-1 - Information technology. Learning, education and training. Collaborative technology. Collaborative learning communication
- BS-ISO/IEC-19781-1 - Part 1: Registry Content, Information Technology, Learning, Education & Training, Reg
- BS-ISO/IEC-19781-2 - Part 2: Registration Authority Process, Information Technology, Learning, Education &
- BS-ISO/IEC-19788-7 - Information technology. Learning, education and training. Metadata for learning resources
- BS-ISO/IEC-19796-1 - Information Technology, Learning, Education & Training, Quality Manage Ment, Assurance
- BS-ISO/IEC-20006-1 - Information technology for learning, education and training. Information model for competency
- BS-ISO/IEC-20006-2 - Information technology for learning, education and training. Information model for competency
- BS-ISO/IEC-20013 - Information technology for learning, education and training. Reference framework of e-Portfolio information
- BS-ISO/IEC-24751-1 - Information technology. Individualized adaptability and accessibility in e-learning, education and training
- BS-ISO/IEC-24751-2 - Information technology. Individualized adaptability and accessibility in e-learning, education and training
- BS-ISO/IEC-24751-3 - Information technology. Individualized adaptability and accessibility in e-learning, education and training
- BS-ISO/IEC-24751-4 - Information technology. Individualized adaptability and accessibility in e-learning, education and training
- BS-ISO/IEC-40180 - Information technology. Quality for learning, education and training. Fundamentals and reference framework
- CWA-15499-1 - Personal Data Protection Audit Framework (EU Directive 95/46/EC), Baseline Framework
- CWA-15499-2 - Personal Data Protection Audit Framework (EU Directive 95/46/EC), Checklists, Question
- CWA-16275 - Guidelines for the Selection of Consultants Advising Smes on Integrated Quality, Envir
- CWA-16335 - Biosafety professional competence
- CWA-16520 - Guide dog mobility instructor. Competences
- DD-CEN-ISO-22475-3 - Geotechnical investigation and testing. Sampling methods and groundwater measurements
- DD-ISO/PAS-28003 - Security management systems for the supply chain. Requirements for bodies providing audit and certification of supply chain security management systems
- PAS-1948 - Diversity, equity and inclusion in the workplace. Code of practice
- PAS-43 - Safe working of vehicle breakdown, recovery and removal operations. Management system specification
- PAS-43-TC - Tracked Changes. Safe working of vehicle breakdown, recovery and removal operations. Management system specification
- PAS-44010 - Design, implementation and maintenance of voluntary agreements. Specification
- PAS-46 - Improving loyalty. Requirements
- PD-6606 - Non-destructive testing. Qualification and certification of NDT personnel
- PD-CEN-15628 - Maintenance. Qualification of maintenance personnel
- PD-CEN-16862 - Plastics welding supervisor. Task, responsibilities, knowledge, skills and competence
- PD-CEN-16862-TC - Tracked Changes. Plastics welding supervisor. Task, responsibilities, knowledge, skills and competence
- PD-CEN-17699 - Guidelines for developing ICT Professional Curricula as scoped by EN 16234-1 (e-CF)
- PD-CEN-17748-2 - Foundational Body of Knowledge for the ICT Profession (ICT BoK)
- PD-CEN-17834 - European Professional Ethics Framework for the ICT Profession (EU ICT Ethics)
- PD-CEN-17884 - ICT accessibility competences. Guidelines for a more inclusive ICT development
- PD-CEN-ISO-17969 - Petroleum, petrochemical and natural gas industries. Guidelines on competency for personnel
- PD-CEN-ISO-17969-TC - Tracked Changes. Petroleum, petrochemical and natural gas industries. Guidelines on competency management for well operations personnel
- PD-CEN-ISO-24283-1 - Geotechnical investigation and testing. Qualification criteria and assessment
- PD-CEN-ISO-24283-2 - Geotechnical investigation and testing. Qualification criteria and assessment
- PD-CEN-ISO-24283-3 - Geotechnical investigation and testing. Qualification criteria and assessment
- PD-ISO-22583 - Requirements and recommendations for supervisors and operators of point-of-care testing (POCT) equipment
- PD-ISO-24178 - Human resource management. Organizational culture metrics cluster
- PD-ISO-24179 - Human resource management. Occupational health and safety metrics
- PD-ISO-30406 - Human resource management. Sustainable employability management for organizations
- PD-ISO-30407 - Human resource management. Cost-Per-Hire
- PD-ISO-30410 - Human resource management. Impact of hire metric
- PD-ISO-30411 - Human resource management. Quality of hire metric
- PD-ISO-30423 - Human resource management. Compliance and ethics metrics cluster
- PD-ISO-30427 - Human resource management. Costs metrics cluster
- PD-ISO-30430 - Human resource management. Recruitment metrics cluster
- PD-ISO-30431 - Human resource management. Leadership metrics cluster
- PD-ISO-30432 - Human resource management. Workforce productivity metrics cluster
- PD-ISO-30437 - Human resource management. Learning and development metrics
- PD-ISO-30438 - Human resource management. Employee engagement metrics
- PD-ISO/IEC-20748-1 - Information technology for learning, education and training. Learning analytics interoperability
- PD-ISO/IEC-20748-2 - Information technology for learning, education and training. Learning analytics interoperability. System requirements
- PD-ISO/IEC-20748-3 - Information technology for learning, education and training. Learning analytics interoperability
- PD-ISO/IEC-20748-4 - Information technology for learning, education and training. Learning analytics interoperability
- PD-ISO/IEC-24751-4 - Information technology for learning, education and training. AccessForAll framework for individualized accessibility
- PD-ISO/PAS-23678-1 - Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear
- PD-ISO/PAS-23678-2 - Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear
- PD-ISO/PAS-23678-3 - Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear
- PD-ISO/PAS-23678-4 - Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear
ISO:
- ISO-10011-2 - Guidelines for auditing quality systems -- Part 2: Qualification criteria for quality systems auditors
- ISO-10015 - Quality management - Guidelines for competence management and people development
- ISO-10015-RL - Quality management - Guidelines for competence management and people development
- ISO-10015 SPANISH - Quality-management---Guidelines-for-competence-management-and-people-development-[Standard-in-Spanish]
- ISO-10018 - Quality management - Guidance for people engagement
- ISO-10018 SPANISH - Quality management - Guidelines on people involvement [Spanish version]
- ISO-10019 - Guidelines for the selection of quality management system consultants and use of their services
- ISO-11484 - Steel products - Employers qualification system for non-destructive testing (NDT) personnel
- ISO-11774 - Non-destructive testing - Performance-based qualification
- ISO-13300-1 - Sensory analysis - General guidance for the staff of a sensory evaluation laboratory - Part 1: Staff responsibilities
- ISO-13300-2 - Sensory analysis - General guidance for the staff of a sensory evaluation laboratory - Part 2: Recruitment and training of panel leaders
- ISO-13970 - Recreational diving services - Requirements for the training of recreational snorkelling guides
- ISO-14012 - Guidelines for Environmental Auditing - Qualification Criteria for Environmental Auditors
- ISO-16486-8 - Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 8: Training and assessment of fusion operators
- ISO-17969 - Petroleum, petrochemical and natural gas industries - Guidelines on competency management for well operations personnel
- ISO-18436-1 - Condition monitoring and diagnostics of machine systems - Requirements for certification of personnel - Part 1: Sector specific requirements for certification bodies and the certification process
- ISO-18436-2 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 2: Vibration condition monitoring and diagnostics
- ISO-18436-3 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 3: Requirements for training bodies and the training process
- ISO-18436-3-1 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 3: Requirements for training bodies and the training procesAmendment 1
- ISO-18436-4 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 4: Field lubricant analysis
- ISO-18436-5 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 5: Lubricant laboratory technician/analyst
- ISO-18436-6 - Condition monitoring and diagnostics of machines - Requirements for certification of personnel - Part 6: Acoustic emission
- ISO-18436-7 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 7: Thermography
- ISO-18436-8 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 8: Ultrasound
- ISO-18490 - Non-destructive testing - Evaluation of vision acuity of NDT personnel
- ISO-18878 - Mobile elevating work platforms - Operator (driver) training
- ISO-19480 - Polyethylene pipes and fittings for the supply of gaseous fuels or water - Training and assessment of fusion operators
- ISO-20807 - Non-destructive testing - Qualification of personnel for limited application of non-destructive testing
- ISO-22475-3 - Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party
- ISO-22583 - Requirements and recommendations for supervisors and operators of point-of-care testing (POCT) equipment
- ISO-22712 - Refrigerating systems and heat pumps - Competence of personnel
- ISO-22809 - Non-destructive testing - Discontinuities in specimens for use in qualification examinations
- ISO-22935-1 - Milk and milk products - Sensory analysis - Part 1: Recruitment, selection, training and monitoring of assessors
- ISO-23133 - Nuclear criticality safety - Nuclear criticality safety training for operations
- ISO-23326 - Human resource management - Employee engagement - Guidelines
- ISO-23665 - Unmanned aircraft systems - Training for personnel involved in UAS operations
- ISO-23676 - Rough-terrain trucks - Operator training - Content and methods
- ISO-23678-1 - Ships and marine technology - Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear - Part 1: General requirements for training providers
- ISO-23678-2 - Ships and marine technology - Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear - Part 2: Service personnel initial training
- ISO-23678-3 - Ships and marine technology - Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear - Part 3: Level 1 technical training
- ISO-23678-4 - Ships and marine technology - Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear - Part 4: Level 2 in-field competence
- ISO-23684 - Road vehicles - Technical personnel dealing with natural gas vehicles (NGVs) - Training and qualification
- ISO-23813 - Cranes - Training of appointed persons
- ISO-23814 - Cranes - Competency requirements for crane inspectors
- ISO-23853 - Cranes - Training of slingers and signallers
- ISO-24178 - Human resource management - Organizational culture metrics cluster
- ISO-24283-1 - Geotechnical investigation and testing - Qualification criteria and assessment - Part 1: Qualified technician and qualified operator
- ISO-24283-2 - Geotechnical investigation and testing - Qualification criteria and assessment - Part 2: Responsible expert
- ISO-24283-3 - Geotechnical investigation and testing - Qualification criteria and assessment - Part 3: Qualified enterprise
- ISO-24671 - Road vehicles - Qualification and certification of technical personnel dealing with natural gas vehicles (NGVs)
- ISO-24802-1 - Recreational diving services - Requirements for the training of scuba instructors - Part 1: Level 1
- ISO-24802-2 - Recreational diving services - Requirements for the training of scuba instructors - Part 2: Level 2
- ISO-24806 - Recreational diving services - Requirements for rebreather diver training - Decompression diving to 60 m
- ISO-24807 - Recreational diving services - Requirements for rebreather diver training - Decompression diving to 100 m
- ISO-24808 - Recreational diving services - Requirements for rebreather instructor training
- ISO-25550 - Ageing societies - General requirements and guidelines for an age-inclusive workforce
- ISO-25551 - Ageing societies - General requirements and guidelines for carer-inclusive organizations
- ISO-30400 - Human resource management - Vocabulary
- ISO-30401 - Knowledge management systems - Requirements
- ISO-30401-AM1 - - Amendment 1: Knowledge management systems - Requirements - Amendment 1
- ISO-30401-AM2 - - Amendment 2: Knowledge management systems - Requirements - Amendment 2: Climate action changes
- ISO-30405 - Human resource management - Guidelines on recruitment
- ISO-30406 - Human resource management - Sustainable employability management for organizations
- ISO-30407 - Human resource management - Cost-Per-Hire
- ISO-30408 - Human resource management - Guidelines on human governance
- ISO-30409 - Human resource management - Workforce planning
- ISO-30410 - Human resource management - Impact of hire metric
- ISO-30411 - Human resource management - Quality of hire metric
- ISO-30414 - Human resource management - Guidelines for internal and external human capital reporting
- ISO-30415 - Human resource management - Diversity and inclusion
- ISO-30422 - Human resource management - Learning and development
- ISO-30423 - Human resource management - Compliance and ethics metrics cluster
- ISO-30425 - Human resource management - Workforce availability metrics cluster
- ISO-30427 - Human resource management - Costs metrics cluster
- ISO-30428 - Human resource management - Skills and capabilities metrics cluster
- ISO-30430 - Human resource management - Recruitment metrics cluster
- ISO-30431 - Human resource management - Leadership metrics cluster
- ISO-30432 - Human resource management - Workforce productivity metrics cluster
- ISO-30433 - Human resource management - Succession planning metrics cluster
- ISO-30434 - Human resource management - Workforce allocation
- ISO-30435 - Human resource management - Workforce data quality
- ISO-30437 - Human resource management - Learning and development metrics
- ISO-30438 - Human resource management - Employee engagement metrics
- ISO-5496 - Sensory analysis - Methodology - Initiation and training of assessors in the detection and recognition of odours
- ISO-5496-AM1 - - Amendment 1
- ISO-7130 - Earth-moving machinery - Operator training - Content and methods
- ISO-8152 - Earth-moving machinery -- Operation and maintenance -- Training of mechanics
- ISO-8586 - Sensory analysis - Selection and training of sensory assessors
- ISO-8586-1 - Sensory analysis -- General guidance for the selection, training and monitoring of assessors -- Part 1: Selected assessors
- ISO-8586-2 - Sensory analysis - General guidance for the selection, training and monitoring of assessors - Part 2: Expert sensory assessors
- ISO-8655-10 - Piston-operated volumetric apparatus - Part 10: User guidance, and requirements for competence, training, and POVA suitability
- ISO-8804-1 - Requirements for the training of scientific divers - Part 1: Scientific divers
- ISO-8804-2 - Requirements for the training of scientific divers - Part 2: Advanced scientific divers
- ISO-8804-3 - Requirements for the training of scientific divers - Part 3: Scientific diving project leader
- ISO-9712 - Non-destructive testing - Qualification and certification of NDT personnel
- ISO-9926-1 - Cranes - Training of drivers - Part 1: General
- ISO-9926-3 - Cranes - Training of operators - Part 3: Tower cranes
- ISO/ASTM-52926-1 - Additive manufacturing of metals - Qualification principles - Part 1: General qualification of operators
- ISO/ASTM-52926-2 - Additive manufacturing of metals - Qualification principles - Part 2: Qualification of operators for PBF-LB
- ISO/ASTM-52926-3 - Additive manufacturing of metals - Qualification principles - Part 3: Qualification of operators for PBF-EB
- ISO/ASTM-52926-4 - Additive manufacturing of metals - Qualification principles - Part 4: Qualification of operators for DED-LB
- ISO/ASTM-52926-5 - Additive manufacturing of metals - Qualification principles - Part 5: Qualification of operators for DED-Arc
- ISO/ASTM-52942 - Additive manufacturing - Qualification principles - Qualifying machine operators of laser metal powder bed fusion machines and equipment used in aerospace applications
- ISO/DIS-22935-1 - Part 1: General Guidance for the Recruitement, Selection, Training and Monitoring of Ass
- ISO/IEC-19479 - Information technology for learning, education, and training - Learner mobility achievement information (LMAI)
- ISO/IEC-19778-1 - Information technology - Learning, education and training - Collaborative technology - Collaborative workplace - Part 1: Collaborative workplace data model
- ISO/IEC-19778-2 - Information technology - Learning, education and training - Collaborative technology - Collaborative workplace - Part 2: Collaborative environment data model
- ISO/IEC-19778-3 - Information technology - Learning, education and training - Collaborative technology - Collaborative workplace - Part 3: Collaborative group data model
- ISO/IEC-19780-1 - Information technology - Learning, education and training - Collaborative technology - Collaborative learning communication - Part 1: Text-based communication
- ISO/IEC-19788-1 - Information technology for learning, education and training - Metadata for learning resources - Part 1: Framework
- ISO/IEC-19788-11 - Information technology - Learning, education and training - Metadata for learning resources - Part 11: Migration from LOM to MLR
- ISO/IEC-19788-1-AM1 - - Amendment 1
- ISO/IEC-19788-2 - Information technology - Learning, education and training - Metadata for learning resources - Part 2: Dublin Core elements
- ISO/IEC-19788-2-AM1 - - Amendment 1: Non-literal content value data elements
- ISO/IEC-19788-3 - Information technology - Learning, education and training - Metadata for learning resources - Part 3: Basic application profile
- ISO/IEC-19788-3-AM1 - - Amendment 1
- ISO/IEC-19788-4 - Information technology - Learning, education and training - Metadata for learning resources - Part 4: Technical elements
- ISO/IEC-19788-5 - Information technology - Learning, education and training - Metadata for learning resources - Part 5: Educational elements
- ISO/IEC-19788-7 - Information technology - Learning, education and training - Metadata for learning resources - Part 7: Bindings
- ISO/IEC-19788-8 - Information technology - Learning, education and training - Metadata for learning resources - Part 8: Data elements for MLR records
- ISO/IEC-19788-9 - Information technology - Learning, education and training - Metadata for learning resources - Part 9: Data elements for persons
- ISO/IEC-19796-1 - Information technology - Learning, education and training - Quality management, assurance and metrics - Part 1: General approach
- ISO/IEC-19796-3 - Information technology - Learning, education and training - Quality management, assurance and metrics - Part 3: Reference methods and metrics
- ISO/IEC-20006-1 - Information technology for learning, education and training - Information model for competency - Part 1: Competency general framework and information model
- ISO/IEC-20006-2 - Information technology for learning, education and training - Information model for competency - Part 2: Proficiency level information model
- ISO/IEC-20013 - Information technology for learning, education and training - Reference framework of e-Portfolio information
- ISO/IEC-20016-1 - Information technology for learning, education and training - Language accessibility and human interface equivalencies (HIEs) in e-learning applications - Part 1: Framework and reference model for semantic interoperability
- ISO/IEC-20748-1 - Information technology for learning, education and training - Learning analytics interoperability - Part 1: Reference model
- ISO/IEC-20748-2 - Information technology for learning, education and training - Learning analytics interoperability - Part 2: System requirements
- ISO/IEC-20748-3 - Information technology for learning, education and training - Learning analytics interoperability - Part 3: Guidelines for data interoperability
- ISO/IEC-20748-4 - Information technology for learning, education and training - Learning analytics interoperability - Part 4: Privacy and data protection policies
- ISO/IEC-24725-1 - ITLET supportive technology and specification integration - Part 1: Framework
- ISO/IEC-24725-3 - Information technology for learning, education and training - Supportive technology and specific integration - Part 3: Platform and Media Taxonomy (PMT)
- ISO/IEC-24751-1 - Information technology - Individualized adaptability and accessibility in e-learning, education and training - Part 1: Framework and reference model
- ISO/IEC-24751-2 - Information technology - Individualized adaptability and accessibility in e-learning, education and training - Part 2: Access for all personal needs and preferences for digital delivery
- ISO/IEC-24751-3 - Information technology - Individualized adaptability and accessibility in e-learning, education and training - Part 3: Access for all digital resource description
- ISO/IEC-24751-4 - Information technology - Individualized adaptability and accessibility in e-learning, education and training - Part 4: Access for all framework for individualized accessibility and registry server application programming interface (API)
- ISO/IEC-29140-1 - Information technology for learning, education and training - Nomadicity and mobile technologies - Part 1: Nomadicity reference model
- ISO/IEC-29140-2 - Information technology for learning, education and training - Nomadicity and mobile technologies - Part 2: Learner information model for mobile learning
- ISO/IEC-29163-1 - Information technology - Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition - Part 1: Overview Version 1.1
- ISO/IEC-29163-2 - Information technology - Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition - Part 2: Content Aggregation Model Version 1.1
- ISO/IEC-29163-3 - Information technology - Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition - Part 3: Run-Time Environment Version 1.1
- ISO/IEC-29163-4 - Information technology - Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition - Part 4: Sequencing and Navigation Version 1.1
- ISO/IEC-29187-1 - Information technology - Identification of privacy protection requirements pertaining to learning, education and training (LET) - Part 1: Framework and reference model
- ISO/IEC-40180 - Information technology - Quality for learning, education and training - Fundamentals and reference framework
- ISO/PAS-23678-1 - Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear - Part 1: General requirements for training providers
- ISO/PAS-23678-2 - Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear - Part 2: Service personnel initial training
- ISO/PAS-23678-3 - Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear - Part 3: Level 1 technician training
- ISO/PAS-23678-4 - Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear - Part 4: Level 2 in-field competence
- IWA-30-1 - Competence of standards professionals - Part 1: In companies
- IWA-30-2 - Competence of standards professionals - Part 2: In standards-related organizations
Other SDOs:
- BS-EN-17678-2 - Installation of post-tensioning kits for prestressing of structures
- EN-13067 - Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
- EN-15565 - Tourism Services, Requirements for the Provision of Professional Tourist Guide Trainin
- EN-1591-4 - Flanges and their joints - Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems
- EN-16736 - Health risk assessment of chemicals - Requirements for the provision of training
- EN-16872 - Services of Medical Doctors with additional qualification in Homeopathy (MDQH) - Requirements for health care provision by Medical Doctors with additional qualification in Homeopathy
- EN-ISO-14732 - Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
- EN-ISO-18490 - Non-destructive Testing - Evaluation of vision acuity of NDT personnel
- EN-ISO-24802-1 - Recreational diving services - Requirements for the training of scuba instructors - Part 1: Level 1 (ISO 24802-1:2014)
- EN-ISO-24802-2 - Recreational diving services - Requirements for the training of scuba instructors - Part 2: Level 2 (ISO 24802-2:2014)
- EN-ISO-8586 - Sensory analysis - General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors (ISO 8586:2012)
- EN-ISO-8586-2 - Sensory Analysis, General Guidance for the Selection, Training & Monitoring of Assesso
- EN-ISO-9606-1 - Qualification testing of welders - Fusion welding - Part 1: Steels
- EN-ISO-9712 - Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
- EN-ISO/IEC-19788-1 - Information technology - Learning, education and training - Metadata for learning resources - Part 1: Framework (ISO/IEC 19788-1:2011)
- EN-ISO/IEC-19788-2 - Information technology - Learning, education and training - Metadata for learning resources - Part 2: Dublin Core elements (ISO/IEC 19788-2:2011)
- EN-ISO/IEC-19788-3 - Information technology - Learning, education and training - Metadata for learning resources - Part 3: Basic application profile (ISO/IEC 19788-3:2011)
- EN-ISO/IEC-19788-5 - Information technology - Learning, education and training - Metadata for learning resources - Part 5: Educational elements (ISO/IEC 19788-5:2012)
- EN-ISO/IEC-19796-1 - Information Technology, Learning, Education & Training, Quality Management, Assurance
- JIS-B-0912-1 - Condition monitoring and diagnostics of machines -- Requirements for training and certification of personnel -- Part 1: Requirements for certifying bodies and the certification process
- JIS-B-0912-2 - Condition monitoring and diagnostics of machines -- Requirements for training and certification of personnel -- Part 2: Vibration condition monitoring and diagnostics
- JIS-G-0431 - Steel products -- Employer's qualification system for non-destructive testing (NDT) personnel
- SIS-CEN-ISO/TS-17969 - Petroleum, petrochemical and natural gas industries - Guidelines on competency for personnel (ISO/TS 17969:2015)
- SIS-ISO/TR-19480 - Polyethylene pipes and fittings for the supply of gaseous fuels or water - Training and assessment of fusion operators
- SIS-ISO/TR-30406 - Human resource management Sustainable employability management for organizations (ISO/TR 30406:2017, IDT)
- SIS-ISO/TS-11774 - Non-destructive testing - Performance based qualification (ISO/TS 11774:2011, IDT)
- SIS-ISO/TS-22583 - Guidance for supervisors and operators of point-of-care testing (POCT) devices (ISO/TS 22583:2019)
- SIS-ISO/TS-24178 - Human Resource Management - Organizational culture metrics cluster (ISO/TS 24178:2021)
- SIS-ISO/TS-30410 - Human resource management - Impact of hire metric (ISO/TS 30410:2018, IDT)
- SIS-ISO/TS-30411 - Human resource management - Quality of hire metric (ISO/TS 30411:2018, IDT)
- SIS-ISO/TS-30423 - Human Resource Management - Compliance and Ethics Metrics Cluster (ISO/TS 30423:2021)
- SIS-ISO/TS-30431 - Human Resource Management -Technical Specification for Leadership Metrics Cluster (ISO/TS 30431:2021, IDT)
- SS-EN-13067 - Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies
- SS-EN-15565 - Tourism Services - Requirements for the provision of professional tourist guide training and qualification programmes
- SS-EN-15628 - Maintenance - Qualification of maintenance personnel
- SS-EN-1591-4 - Flanges and their joints - Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems
- SS-EN-16736 - Health risk assessment of chemicals - Requirements for the provision of training
- SS-EN-16872 - Services of Medical Doctors with additional qualification in Homeopathy (MDQH) - Requirements for health care provision by Medical Doctors with additional qualification in Homeopathy
- SS-EN-17678-1 - Installation of post-tensioning kits for prestressing of structures - Part 1: Competence of personnel
- SS-EN-17678-2 - Installation of post-tensioning kits for prestressing of structures - Part 2: Assessment of personnel
- SS-EN-17740 - Requirements for professional profiles related to personal data processing and protection
- SS-EN-4179 - Aerospace series - Qualification and approval of personnel for non-destructive testing
- SS-EN-ISO-14732 - Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
- SS-EN-ISO-18490 - Non-destructive Testing - Evaluation of vision acuity of NDT personnel (ISO 18490:2015)
- SS-EN-ISO-23133 - Nuclear criticality safety - Nuclear criticality safety training for operations (ISO 23133:2021)
- SS-EN-ISO-24802-1 - Recreational diving services - Requirements for the training of scuba instructors - Part 1: Level 1 (ISO 24802-1:2014)
- SS-EN-ISO-24802-2 - Recreational diving services - Requirements for the training of scuba instructors - Part 2: Level 2 (ISO 24802-2:2014)
- SS-EN-ISO-8586 - Sensory analysis - General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors (ISO 8586:2012, Corrected version 2014-06-15)
- SS-EN-ISO-8586-2 - Sensory analysis - General guidance for the selection, training and monitoring of assessors - Part 2: Expert sensory assessors (ISO 8586-2:2008)
- SS-EN-ISO-9606-1 - Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
- SS-EN-ISO-9712 - Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2021)
- SS-EN-ISO/ASTM-52926-1 - Additive Manufacturing of metals - Qualification principles - Part 1: General qualification of operators (ISO/ASTM 52926-1:2023)
- SS-EN-ISO/ASTM-52926-2 - Additive Manufacturing of metals - Qualification principles - Part 2: Qualification of operators for PBF-LB (ISO/ASTM 52926-2:2023)
- SS-EN-ISO/ASTM-52926-3 - Additive manufacturing of metals - Qualification principles - Part 3: Qualification of operators for PBF-EB (ISO/ASTM 52926-3:2023)
- SS-EN-ISO/ASTM-52926-4 - Additive manufacturing of metals - Qualification principles - Part 4: Qualification of operators for DED-LB (ISO/ASTM 52926-4:2023)
- SS-EN-ISO/ASTM-52926-5 - Additive manufacturing of metals - Qualification principles - Part 5: Qualification of operators for DED-Arc (ISO/ASTM 52926-5:2023)
- SS-EN-ISO/ASTM-52942 - Additive manufacturing - Qualification principles - Qualifying machine operators of laser metal powder bed fusion machines and equipment used in aerospace applications (ISO/ASTM 52942:2020)
- SS-EN-ISO/IEC-19788-1 - Information technology - Learning, education and training - Metadata for learning resources - Part 1: Framework (ISO/IEC 19788-1:2011)
- SS-EN-ISO/IEC-19788-2 - Information technology - Learning, education and training - Metadata for learning resources - Part 2: Dublin Core elements (ISO/IEC 19788-2:2011)
- SS-EN-ISO/IEC-19788-3 - Information technology - Learning, education and training - Metadata for learning resources - Part 3: Basic application profile (ISO/IEC 19788-3:2011)
- SS-EN-ISO/IEC-19788-5 - Information technology - Learning, education and training - Metadata for learning resources - Part 5: Educational elements (ISO/IEC 19788-5:2012)
- SS-EN-ISO/IEC-19796-1 - Information technology - Learning, education, and training - Quality management, assurance and metrics - Part 1: General approach (ISO/IEC 19796-1:2005)
- SS-ISO-10018 - Quality management - Guidelines on people involvement and competence (ISO 10018:2012, IDT)
- SS-ISO-18436-1 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 1: Requirements for assessment bodies and the assessment process (ISO 18436-1:2012 Corrected version 2013-01-15, IDT)
- SS-ISO-18436-5 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 5: Lubricant laboratory technician/analyst (ISO 18436-5:2012, IDT)
- SS-ISO-18878 - Mobile elevating work platforms - Operator (driver) training (ISO 18878:2013, IDT)
- SS-ISO-23133 - Nuclear criticality safety Nuclear criticality safety training for operations (ISO 23133:2021, IDT)
- SS-ISO-23813 - Cranes - Training of appointed persons (ISO 23813:2007, IDT)
- SS-ISO-23814 - Cranes - Competency requirements for crane inspectors (ISO 23814:2009, IDT)
- SS-ISO-23853 - Cranes - Training of slingers and signallers (ISO 23853, IDT)
- SS-ISO-30400 - Human resource management - Vocabulary (ISO 30400:2016, IDT)
- SS-ISO-30401 - Knowledge management systems - Requirements (ISO 30401:2018, IDT)
- SS-ISO-30405 - Human resource management - Guidelines on recruitment (ISO 30405:2016, IDT)
- SS-ISO-30408 - Human resource management - Guidelines on human governance (ISO 30408:2016, IDT)
- SS-ISO-30409 - Human resource management - Workforce planning (ISO 30409:2016, IDT)
- SS-ISO-30414 - Human resource management - Guidelines for internal and external human capital reporting (ISO 30414:2018, IDT)
- SS-ISO-30415 - Human resource management Diversity and inclusion (ISO 30415:2021, IDT)
- SS-ISO-7130 - Earth-moving machinery - Operator training - Content and methods (ISO 7130:2013, IDT)
- SS-ISO-9926-3 - Cranes - Training of operators - Part 3: Tower cranes (ISO 9926-3:2016, IDT)