Document Center List of Standards on Reinforced Plastics Materials For The Reinforcement Of Plastics, See 59.100
ICS Code 83.120
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-C1783 - Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications
- ASTM-C1793 - Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications
- ASTM-C1836 - Standard Classification for Fiber Reinforced Carbon-Carbon Composite Structures
- ASTM-C271 - Standard Test Method for Density of Sandwich Core Materials
- ASTM-C272 - Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions
- ASTM-C273 - Standard Test Method for Shear Properties of Sandwich Core Materials
- ASTM-C297 - Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
- ASTM-C363 - Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
- ASTM-C364 - Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
- ASTM-C365 - Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
- ASTM-C366 - Standard Test Methods for Measurement of Thickness of Sandwich Cores
- ASTM-C393 - Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
- ASTM-C394 - Standard Test Method for Shear Fatigue of Sandwich Core Materials
- ASTM-C480 - Standard Test Method for Flexure Creep of Sandwich Constructions
- ASTM-C481 - Standard Test Method for Laboratory Aging of Sandwich Constructions
- ASTM-C581 - Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
- ASTM-C613 - Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
- ASTM-D1494 - Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
- ASTM-D1761 - Standard Test Methods for Mechanical Fasteners in Wood and Wood-Based Materials
- ASTM-D2290 - Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
- ASTM-D2473 - Specification for Polycarbonate Molding, Extrusion, and Casting Materials (Withdrawn 1982)
- ASTM-D2562 - Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics (Withdrawn 2024)
- ASTM-D2563 - Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts (Withdrawn 2024)
- ASTM-D2586 - Standard Test Method for Hydrostatic Compressive Strength of Glass-Reinforced Plastic Cylinders (Withdrawn 1996)
- ASTM-D2734 - Standard Test Methods for Void Content of Reinforced Plastics
- ASTM-D2848 - Specification for Reinforced Polycarbonate Injection Molding and Extrusion Materials (Withdrawn 1982)
- ASTM-D3529 - Standard Test Methods for Constituent Content of Composite Prepreg
- ASTM-D3529M - Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
- ASTM-D3530 - Standard Test Method for Volatiles Content of Composite Material Prepreg
- ASTM-D3531 - Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
- ASTM-D3532 - Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
- ASTM-D3552 - Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
- ASTM-D3553 - Standard Test Method for Fiber Content by Digestion of Reinforced Metal Matrix Composites (Withdrawn 2000)
- ASTM-D3646 - Specification for Reinforced and Filled Polyphenylene Sulfide Injection Molding and Extrusion Materials (Withdrawn 1985)
- ASTM-D3647 - Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition (Withdrawn 2022)
- ASTM-D3800 - Standard Test Method for Density of High-Modulus Fibers
- ASTM-D3841 - Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
- ASTM-D3846 - Standard Test Method for In-Plane Shear Strength of Reinforced Plastics (Withdrawn 2024)
- ASTM-D3914 - Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
- ASTM-D3916 - Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced
Plastic Rod - ASTM-D3935 - Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
- ASTM-D3982 - Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts
- ASTM-D4067 - Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
- ASTM-D4357 - Standard Specification for Plastic Laminates Made from Woven-Roving and Woven-Yarn Glass Fabrics (Withdrawn 2004)
- ASTM-D4385 - Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products
- ASTM-D4398 - Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure (Withdrawn 2015)
- ASTM-D4475 - Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
- ASTM-D4476 - Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods (Withdrawn 2022)
- ASTM-D4923 - Standard Specification for Reinforced Thermosetting Plastic Poles (Withdrawn 2010)
- ASTM-D5117 - Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
- ASTM-D5448 - Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
- ASTM-D5467 - Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
- ASTM-D5528 - Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM-D5573 - Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
- ASTM-D570 - Standard Test Method for Water Absorption of Plastics
- ASTM-D5766 - Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
- ASTM-D5908 - Standard Test Method for Resin Binder Distribution and Binder Penetration Analysis of Polyester Nonwoven Fabrics (Withdrawn 2008)
- ASTM-D5961 - Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
- ASTM-D6115 - Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM-D6264 - Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
- ASTM-D6415 - Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
- ASTM-D6416 - Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
- ASTM-D6484 - Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
- ASTM-D6509 - Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
- ASTM-D6671 - Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
- ASTM-D6742 - Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
- ASTM-D6772 - Standard Test Method for Dimensional Stability of Sandwich Core Materials
- ASTM-D6818 - Standard Test Method for Tensile Properties of Rolled Erosion Control Products
- ASTM-D7028 - Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
- ASTM-D7078 - Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
- ASTM-D7136 - Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
- ASTM-D7137 - Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
- ASTM-D7264 - Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
- ASTM-D7291 - Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
- ASTM-D7332 - Standard Test Method for Measuring the Fastener Pull-Through Resistance of a
Fiber-Reinforced Polymer Matrix Composite - ASTM-D7565 - Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
- ASTM-D7615 - Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
- ASTM-D7617 - Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
- ASTM-D7745 - Standard Practice for Testing Pultruded Composites
- ASTM-D7766 - Standard Practice for Damage Resistance Testing of Sandwich Constructions
- ASTM-D7792 - Standard Practice for Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
- ASTM-D7913 - Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
- ASTM-D7914 - Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
- ASTM-D7992 - Standard Practice for Elevated Temperature and Moisture Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
- ASTM-D8019 - Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets
- ASTM-D8067 - Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture
- ASTM-D8069 - Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
- ASTM-E1434 - Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases (Withdrawn 2015)
- ASTM-E2581 - Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications
- ASTM-E691 - Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
- ASTM-F1921 - Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
- ASTM-F3059 - Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding
BSI:
- BS-2782-10-M-1001 - Methods of testing plastics. Glass reinforced plastics. Measurement of hardness by means of a Barcol impressor
- BS-2782-10-M-1002 - Methods of testing plastics. Glass reinforced plastics. Determination of loss on ignition
- BS-2782-10-M-1003 - Methods of testing plastics. Glass reinforced plastics
- BS-2782-10-M-1004 - Methods of testing plastics. Glass reinforced plastics. Standard atmospheres for conditioning and testing
- BS-2782-10-M-1005 - Methods of testing plastics. Glass reinforced plastics
- BS-2782-10-M-1006 - Methods of testing plastics. Glass reinforced plastics
- BS-2782-10-M-1008A - Methods of Testing Plastics, Glass Reinfoced Plastics, General Considerations & Prepar
- BS-2782-10-M-1008B - Methods of Testing Plastics, Glass Reinforced Plastics, Determination of Flexural Stre
- BS-2782-10-M-1008C - Methods of Testing Plastics, Glass Reinforced Plastics, Determination of Compressive S
- BS-2782-10-M-1008D - Methods of testing plastics. Glass reinforced plastics
- BS-2782-3-M-341A - Methods of testing plastics. Mechanical properties. Determination of apparent interlaminar shear strength of reinforced plastics
- BS-2782-4-M-432A - Method-432a: Determination of Residual Styrene Monomer Content in Reinforced Plastics
- BS-4154-1 - Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced). Specification for material and performance requirements
- BS-4154-2 - Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced). Specification for profiles and dimensions
- BS-4549-1 - Guide to quality control requirements for reinforced plastics mouldings
- BS-6564-3 - Polytetrafluoroethylene (PTFE) materials and products
- BS-EN-13421 - Plastics. Thermoset moulding compounds. Composites and reinforcement fibres. Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
- BS-EN-13706-1 - Reinforced plastics composites. Specifications for pultruded profiles
- BS-EN-13706-2 - Reinforced plastics composites. Specifications for pultruded profiles
- BS-EN-13706-3 - Reinforced plastics composites. Specifications for pultruded profiles
- BS-EN-14447 - Fibre reinforced plastics. Glass mat reinforced thermoplastics (GMT). Determination of flowability and solidification
- BS-EN-14598-1 - Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC)
- BS-EN-14598-2 - Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC)
- BS-EN-16245-1 - Fibre-reinforced plastic composites. Declaration of raw material characteristics
- BS-EN-16245-2 - Fibre-reinforced plastic composites. Declaration of raw material characteristics
- BS-EN-16245-3 - Fibre-reinforced plastic composites. Declaration of raw material characteristics
- BS-EN-16245-4 - Fibre-reinforced plastic composites. Declaration of raw material characteristics
- BS-EN-16245-5 - Fibre-reinforced plastic composites. Declaration of raw material characteristics
- BS-EN-17129 - Continuous-fibre-reinforced plastic composites. Pultruded unidirectional rods. Determination of tensile properties in parallel to the fibre direction
- BS-EN-59 - Glass reinforced plastics. Determination of indentation hardness by means of a Barcol hardness tester
- BS-EN-ISO-10350-2 - Plastics. Acquisition and presentation of comparable single-point data
- BS-EN-ISO-10352 - Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area and fibre mass per unit area
- BS-EN-ISO-11667 - Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods
- BS-EN-ISO-1172-TC - Tracked Changes. Textile-glass-reinforced plastics. Prepregs, moulding compounds and laminates. Determination of the textile-glass and mineral-filler content using calcination methods
- BS-EN-ISO-12114 - Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of cure characteristics
- BS-EN-ISO-12115 - Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of flowability, maturation and shelf life
- BS-EN-ISO-14125 - Fibre-reinforced plastic composites. Determination of flexural properties
- BS-EN-ISO-14126 - Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction
- BS-EN-ISO-14126-TC - Tracked Changes. Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction.
- BS-EN-ISO-15310 - Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method
- BS-EN-ISO-20337 - Fibre-reinforced plastic composites. Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
- BS-EN-ISO-527-4-TC - Tracked Changes. Plastics. Determination of tensile properties
- BS-EN-ISO-527-5 - Plastics. Determination of tensile properties
- BS-EN-ISO-527-5-TC - Tracked Changes. Plastics. Determination of tensile properties
- BS-EN-ISO-75-3 - Plastics. Determination of temperature of deflection under load. High-strength thermosetting laminates and long-fibre-reinforced plastics
- BS-EN-ISO-7822 - Textile glass reinforced plastics. Determination of void content. Loss on ignition, mechanical disintegration and statistical counting methods
- BS-ISO-11667 - Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods
- BS-ISO-1268-1 - Fibre-reinforced plastics. Methods of producing test plates
- BS-ISO-1268-10 - Fibre-reinforced plastics. Methods of producing test plates
- BS-ISO-1268-2 - Fibre-reinforced plastics. Methods of producing test plates
- BS-ISO-1268-3 - Fibre-reinforced plastics. Methods of producing test plates
- BS-ISO-1268-4 - Fibre-reinforced plastics. Methods of producing test plates
- BS-ISO-1268-5 - Fibre-reinforced plastics. Methods of producing test plates
- BS-ISO-1268-6 - Fibre-reinforced plastics. Methods of producing test plates
- BS-ISO-1268-7 - Fibre-reinforced plastics. Methods of producing test plates
- BS-ISO-12815 - Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength
- BS-ISO-12817 - Fibre-reinforced plastic composites. Determination of open-hole compression strength
- BS-ISO-14127 - Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents
- BS-ISO-15024 - Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
- BS-ISO-15024-TC - Tracked Changes. Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
- BS-ISO-15034 - Composites. Prepregs. Determination of resin flow
- BS-ISO-15040 - Composites. Prepregs. Determination of gel time
- BS-ISO-15114 - Fibre-reinforced plastic composites. Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach
- BS-ISO-18352 - Carbon-fibre-reinforced plastics. Determination of compression-after-impact properties at a specified impact-energy level
- BS-ISO-19927 - Fibre-reinforced plastic composites. Determination of interlaminar strength and modulus by double beam shear test
- BS-ISO-20144 - Fibre-reinforced plastic composites. Standard qualification plan (SQP) for composite materials, including reduced qualification plan (RQP) and extended qualification plan (EQP) schemes
- BS-ISO-20337 - Fibre-reinforced plastic composites. Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
- BS-ISO-20975-1 - Fibre-reinforced plastic composites. Determination of laminate of through-thickness properties
- BS-ISO-20975-2 - Fibre-reinforced plastic compositess. Determination of laminate through-thickness properties
- BS-ISO-22314 - Plastics. Glass-fibre-reinforced products. Determination of fibre length
- BS-ISO-22314-TC - Tracked Changes. Plastics. Glass-fibre-reinforced products. Determination of fibre length
- BS-ISO-22821 - Carbon-fibre-reinforced composites. Determination of fibre weight content by thermogravimetry (TG)
- BS-ISO-22836 - Fibre-reinforced composites. Method for accelerated moisture absorption and supersaturated conditioning by moisture using sealed pressure vessel
- BS-ISO-22838 - Composites and reinforcements fibres. Determination of the fracture energy of bonded plates of carbon fibre reinforced plastics (CFRPs) and metal using double cantilever beam specimens
- BS-ISO-22841 - Composites and reinforcements fibres. Carbon fibre reinforced plastics(CFRPs) and metal assemblies. Determination of the tensile lap-shear strength
- BS-ISO-23930 - Fibre-reinforced plastic composites. Full-section compressive test for pultruded profiles
- BS-ISO-24360 - Composites and reinforcements fibres. Carbon fibre reinforced plastics (CFRPs) and metal assemblies. Determination of the cross tension strength
- BS-ISO-4410 - Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
- BS-ISO-4901 - Reinforced plastics based on unsaturated-polyester resins. Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
- BS-ISO-8057 - Determination of galvanic corrosion rate for assembled forms of carbon fibre reinforced plastics (CFRPs) and protection-coated metal. Electrochemical tests in neutral sodium chloride solution
- BS-ISO-8605 - Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification
- BS-PL-4 - Properties of unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Specification
- BS-PL-5 - Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Test methods
- BS-PL-6 - Properties of unsaturated polyester resins for low pressure laminating of glass fibre reinforced composites. Specification
- BS-PL-7 - Unsaturated polyester resins for low pressure laminating of glass fibre reinforced laminates. Test methods
- BS-PL-8 - Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Specification
- BS-PL-9 - Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Test methods
- PD-ISO-23927 - Laminates and moulding compounds. Prepregs. Determination of tack
ISO:
- ISO-10350-2 - Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics
- ISO-10352 - Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area
- ISO-10406-1 - Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part 1: FRP bars and grids
- ISO-10406-2 - Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part 2: FRP sheets
- ISO-10406-3 - Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part 3: CFRP strips
- ISO-11667 - Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods
- ISO-1172 - Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods
- ISO-12114 - Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics
- ISO-12115 - Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life
- ISO-1268-1 - Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions
- ISO-1268-10 - Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens
- ISO-1268-11 - Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates
- ISO-1268-2 - Fibre-reinforced plastics -- Methods of producing test plates -- Part 2: Contact and spray-up moulding
- ISO-1268-3 - Fibre-reinforced plastics -- Methods of producing test plates -- Part 3: Wet compression moulding
- ISO-1268-4 - Fibre-reinforced plastics - Methods of producing test plates - Part 4: Moulding of prepregs
- ISO-1268-4-AM1 - Fibre-reinforced plastics - Methods of producing test plates - Part 4: Moulding of prepregs - Amendment 1
- ISO-1268-5 - Fibre-reinforced plastics -- Methods of producing test plates -- Part 5: Filament winding
- ISO-1268-6 - Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding
- ISO-1268-7 - Fibre-reinforced plastics -- Methods of producing test plates -- Part 7: Resin transfer moulding
- ISO-1268-8 - Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC
- ISO-1268-9 - Fibre-reinforced plastics - Methods of producing test plates - Part 9: Moulding of GMT/STC
- ISO-12815 - Fibre-reinforced plastic composites - Determination of plain-pin bearing strength
- ISO-12817 - Fibre-reinforced plastic composites - Determination of open-hole compression strength
- ISO-13003 - Fibre-reinforced plastics - Determination of fatigue properties under cyclic loading conditions
- ISO-13883 - Plastics - Guide to the writing of test methods
- ISO-14125 - Fibre-reinforced plastic composites - Determination of flexural properties
- ISO-14125-AM1 - Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1
- ISO-14126 - Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction
- ISO-14127 - Carbon-fibre-reinforced composites - Determination of the resin, fibre and void contents
- ISO-14129 - Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method
- ISO-14130 - Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method
- ISO-14484 - Performance guidelines for design of concrete structures using fibre-reinforced polymer (FRP) materials
- ISO-15024 - Fibre-reinforced plastic composites - Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
- ISO-15034 - Composites -- Prepregs -- Determination of resin flow
- ISO-15040 - Composites -- Prepregs -- Determination of gel time
- ISO-15114 - Fibre-reinforced plastic composites - Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach
- ISO-15310 - Fibre-reinforced plastic composites -- Determination of the in-plane shear modulus by the plate twist method
- ISO-17771 - Plastics - Thermoset moulding compounds - Determination of the degree of fibre wetting in SMC
- ISO-18319-2 - Fibre reinforced polymer (FRP) reinforcement for concrete structures - Part 2: Specifications of CFRP strips
- ISO-18352 - Carbon-fibre-reinforced plastics - Determination of compression-after-impact properties at a specified impact-energy level
- ISO-19044 - Test methods for fibre-reinforced cementitious composites - Load-displacement curve using notched specimen
- ISO-19927 - Fibre-reinforced plastic composites - Determination of interlaminar strength and modulus by double beam shear test
- ISO-20144 - Fibre-reinforced plastic composites - Standard qualification plan (SQP) for composite materials, including reduced qualification plan (RQP) and extended qualification plan (EQP) schemes
- ISO-20337 - Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
- ISO-20975-1 - Fibre-reinforced plastic composites - Determination of laminate through-thickness properties - Part 1: Direct tension and compression tests
- ISO-20975-2 - Fibre-reinforced plastic compositess - Determination of laminate through-thickness properties - Part 2: Determination of the elastic modulus, the strength and the Weibull size effects by flexural test of unidirectional laminate, for carbon-fibre based systems
- ISO-21022 - Test method for fibre-reinforced cementitious composites - Load-deflection curve using circular plates
- ISO-21746 - Composites and metal assemblies - Galvanic corrosion tests of carbon fibre reinforced plastics (CFRPs) related bonded or fastened structures in artificial atmospheres - Salt spray tests
- ISO-21914 - Test methods for fibre-reinforced cementitious composites - Bending moment - Curvature curve by four-point bending test
- ISO-22314 - Plastics - Glass-fibre-reinforced products - Determination of fibre length
- ISO-22821 - Carbon-fibre-reinforced composites - Determination of fibre weight content by thermogravimetry (TG)
- ISO-22836 - Fibre-reinforced composites - Method for accelerated moisture absorption and supersaturated conditioning by moisture using sealed pressure vessel
- ISO-22841 - Composites and reinforcements fibres - Carbon fibre reinforced plastics(CFRPs) and metal assemblies - Determination of the tensile lap-shear strength
- ISO-22841-AM1 - - Amendment 1: Composites and reinforcements fibres - Carbon fibre reinforced plastics(CFRPs) and metal assemblies - Determination of the tensile lap-shear strength - Amendment 1: Precision data
- ISO-23523 - Test methods for discrete polymer fibre for fibre-reinforced cementitious composites
- ISO-23927 - Laminates and moulding compounds - Prepregs - Determination of tack
- ISO-23930 - Fibre-reinforced plastic composites - Full-section compressive test for pultruded profiles
- ISO-24360 - Composites and reinforcements fibres - Carbon fibre reinforced plastics (CFRPs) and metal assemblies - Determination of the cross tension strength
- ISO-3597-1 - Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 1: General considerations and preparation of rods
- ISO-3597-2 - Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 2: Determination of flexural strength
- ISO-3597-3 - Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3: Determination of compressive strength
- ISO-3597-4 - Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 4: Determination of apparent interlaminar shear strength
- ISO-4410 - Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
- ISO-4899 - Textile-glass-reinforced thermosetting plastics - Properties and test methods
- ISO-4901 - Reinforced plastics based on unsaturated-polyester resins - Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
- ISO-527-4 - Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
- ISO-527-5 - Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
- ISO-75-3 - Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
- ISO-7822 - Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods
- ISO-8057 - Determination of galvanic corrosion rate for assembled forms of carbon fibre reinforced plastics (CFRPs) and protection-coated metal - Electrochemical tests in neutral sodium chloride solution
- ISO-8060 - Composites and reinforcements fibres - Carbon fibre reinforced plastics (CFRPs) and metal assemblies - Characterization of durability of adhesive interfaces by wedge rupture test
- ISO-8604 - Plastics - Prepregs - Definitions of terms and symbols for designations
- ISO-8605 - Fibre-reinforced plastics - Sheet moulding compound (SMC) - Requirements and specifications
- ISO-8606 - Plastics - Prepregs - Bulk moulding compound (BMC) and dough moulding compound (DMC) - Basis for a specification
- ISO-9782 - Plastics - Reinforced moulding compounds and prepregs - Determination of apparent volatile-matter content
Other SDOs:
- DIN-EN-13421 - Plastics - Thermoset Moulding Compounds - Composites & Reinforcement Fibres - Preparat
- DIN-EN-14447 - Fibre Reinforced Plastics, Glass Mat Reinforced Thermoplastics (Gmt) - Determination O
- DIN-EN-14598-1 - Part 1: Designation, Reinforced Thermosetting Moulding Compounds, Specification for Sh
- DIN-EN-14598-2 - Part 2: Methods of Test & General Requirements, Reinforced Thermosetting Moulding Comp
- DIN-EN-14598-3 - Part 3: Specific Requirements, Reinforced Thermosetting Moulding Compounds, Specificat
- DIN-EN-ISO-10350-1 - Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials
- DIN-EN-ISO-10350-2 - Part 2: Long-Fibre-Reinforced Plastics, Plastics - Acquisition & Presentation of Compa
- DIN-EN-ISO-15310 - Fibre-Reinforced Plastic Composites, Determination of the In-Plane Shear Modulus by Th
- DIN-EN-ISO-75-3 - Part 3: High-Strength Thermosetting Laminates & Long-Fibre-Reinforced Plastics, Plasti
- EN-13421 - Plastics - Thermoset Moulding Compounds - Composites & Reinforcement Fibres - Preparat
- EN-14447 - Fibre Reinforced Plastics, Glass Mat Reinforced Thermoplastics (Gmt) - Determination O
- EN-14598-1 - Part 1: Designation, Reinforced Thermosetting Moulding Compounds, Specification for Sh
- EN-14598-2 - Part 2: Methods of Test & General Requirements, Reinforced Thermosetting Moulding Comp
- EN-14598-3 - Part 3: Specific Requirements, Reinforced Thermosetting Moulding Compounds, Specificat
- EN-16245-1 - Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
- EN-16245-2 - Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
- EN-16245-3 - Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
- EN-16245-4 - Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
- EN-16245-5 - Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials
- EN-17129 - Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction
- EN-59 - Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
- EN-ISO-10350-2 - Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics
- EN-ISO-10352 - Fibre-Reinforced Plastics - Moulding Compounds & Prepregs - Determination of Mass Per
- EN-ISO-11667 - Determination of Resin, Reinforced-Fibre & Mineral-Filler Content - Dissolution Method
- EN-ISO-12114 - Fibre-Reinforced Plastics, Thermosetting Moulding Compounds & Prepregs, Determination
- EN-ISO-12115 - Fibre-Reinforced Plastics, Thermosetting Moulding Compounds & Prepregs, Determination
- EN-ISO-14125 - Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998)
- EN-ISO-15310 - Fibre-Reinforced Plastic Composites, Determination of the In-Plane Shear Modulus by Th
- EN-ISO-75-3 - Part 3: High-Strength Thermosetting Laminates & Long-Fibre-Reinforced Plastics, Plasti
- JIS-A-1191 - Test method for tensile properties of fiber reinforced polymer (FRP) sheets for reinforcement of concrete
- JIS-A-5702 - Rigid PVC corrugated sheets
- JIS-K-7032 - Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness
- JIS-K-7080-2 - Carbon fiber reinforced plastics -- Testing methods for bearing strength -- Part 2: Orthotropic and Quasi-isotropic long fiber laminates
- SS-168401 - Plastics - Preparation of glass fibre reinforce, resin bonded, low-pressure laminated plates or panels for test purposes
- SS-168405 - Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
- SS-168446 - Textile glass reinforced plastics - Determinationof loss of ignition
- SS-EN-12575 - Plastics - Thermoset moulding compounds - Determination of the degrees of fibre wet out in SMC
- SS-EN-12576 - Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMCand DMC
- SS-EN-13421 - Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
- SS-EN-13473-1 - Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation
- SS-EN-13473-2 - Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements
- SS-EN-13473-3 - Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3: Specific requirements
- SS-EN-13677-1 - Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation
- SS-EN-13677-2 - Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements
- SS-EN-13677-3 - Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements
- SS-EN-13706-1 - Reinforced plastics composites - Specifications for pultruded profiles - Part 1: Designation
- SS-EN-13706-2 - Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements
- SS-EN-13706-3 - Reinforced plastics composites - Specifications for pultruded profiles - Part 3: Specific requirements
- SS-EN-14447 - Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
- SS-EN-14598-1 - Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation
- SS-EN-14598-2 - Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
- SS-EN-14598-3 - Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
- SS-EN-16245-1 - Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
- SS-EN-16245-2 - Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
- SS-EN-16245-3 - Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
- SS-EN-16245-4 - Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
- SS-EN-16245-5 - Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials
- SS-EN-17129 - Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction
- SS-EN-2375 - Aerospace series - Resin preimpregnated materials- Production batch sampling procedure
- SS-EN-59 - Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
- SS-EN-ISO-10350-2 - Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2020)
- SS-EN-ISO-10352 - Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
- SS-EN-ISO-11667 - Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997)
- SS-EN-ISO-1172 - Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods (ISO 1172:2023)
- SS-EN-ISO-12114 - Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics
- SS-EN-ISO-12115 - Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997)
- SS-EN-ISO-14125 - Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998)
- SS-EN-ISO-14125-AM1 - Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1 (ISO 14125:1998/Amd 1:2011)
- SS-EN-ISO-14126 - Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999)
- SS-EN-ISO-14129 - Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/-45 degrees tension test method (ISO 14129:1997)
- SS-EN-ISO-14130 - Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method (ISO 14130:1997)
- SS-EN-ISO-15310 - Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999)
- SS-EN-ISO-1889 - Reinforcement yarns - Determination of linear density (ISO 1889:2009)
- SS-EN-ISO-1890 - Reinforcement yarns - Determination of twist (ISO 1890:2009)
- SS-EN-ISO-20337 - Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
- SS-EN-ISO-3344 - Reinforcement products - Determination of moisture content (ISO 3344:1997)
- SS-EN-ISO-527-4 - Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2023)
- SS-EN-ISO-527-5 - Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2021)
- SS-EN-ISO-75-3 - Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates (ISO 75-3:2004)
- SS-EN-ISO-7822 - Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990)
- SS-ISO-10406-1 - Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part 1: FRP bars and grids (ISO 10406-1:2015, IDT)
- SS-ISO-10406-2 - Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part 2: FRP sheets (ISO 10406-2, IDT)
- SS-ISO-1268-1 - Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions (ISO 1268-1:2001, IDT)
- SS-ISO-1268-2 - Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding (ISO 1268-2:2001, IDT)
- SS-ISO-1268-3 - Fibre-reinforced plastics - Methods of producing test plates - Part 3: Wet compression moulding (ISO 1268-3:2000, IDT)
- SS-ISO-1268-5 - Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament winding (ISO 1268-5:2001, IDT)
- SS-ISO-1268-6 - Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding (ISO 1268-6:2002, IDT)
- SS-ISO-1268-7 - Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding (ISO 1268-7:2001, IDT)
- SS-ISO-1268-8 - Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC (ISO 1268-8:2004, IDT)
- SS-ISO-1268-9 - Fibre-reinforced plastics - Methods of producing test plates - Part 9: Moulding of GMT/STC (ISO 1268-9:2003, IDT)
- SS-ISO-12815 - Fibre-reinforced plastic composites - Determination of plain-pin bearing strength (ISO 12815:2013, IDT)
- SS-ISO-12817 - Fibre-reinforced plastic composites - Determination of open-hole compression strength (ISO 12817:2013, IDT)
- SS-ISO-14125 - Fibre-reinforced plastic composites - Determination of flexural properties - Technical corrigendum 1
- SS-ISO-14127 - Carbon-fibre-reinforced composites - Determination of the resin, fibre and void contents (ISO 14127:2008, IDT)
- SS-ISO-14484 - Performance guidelines for design of concrete structures using fibre-reinforced polymer (FRP) materials (ISO 14484:2013, IDT)
- SS-ISO-14513 - Road vehicles - Pedestrian protection - Head impact test method (ISO 14513:2016, IDT)
- SS-ISO-17771 - Plastics - Thermoset moulding compounds - Determination of the degree of fibre wetting in SMC
- SS-ISO-18352 - Carbon-fibre-reinforced plastics - Determination of compression-after-impact properties at a specified impactenergy level (ISO 18352:2009, IDT)
- SS-ISO-3268 - Plastics - Glass-reinforced materials - Determination of tensile properties
- SS-ISO-3597 - Textile glass reinforced plastics - Composites inthe form of rods made from textile glass rovings - Determination of flexural (cross-breaking) strength
- SS-ISO-3597-1 - Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 1: General considerations and preparation of rods (ISO 3597-1:2003, IDT)
- SS-ISO-3597-2 - Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2: Determination of flexural strength (ISO 3597-2:2003, IDT)
- SS-ISO-3597-3 - Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3: Determination of compressive strength (ISO 3597-3:2003, IDT)
- SS-ISO-3597-4 - Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 4: Determination of apparent interlaminar shear strength (ISO 3597-4:2003, IDT)
- SS-ISO-4901 - Reinforced plastics based on unsaturated-polyester resins - Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography (ISO 4901:2011, IDT)
- UNE-EN-59 - Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester