Document Center List of Standards on Advanced Ceramics
ICS Code 81.060.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1145 - Standard Terminology of Advanced Ceramics
- ASTM-C1198 - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
- ASTM-C1211 - Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
- ASTM-C1273 - Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
- ASTM-C1275 - Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
- ASTM-C1291 - Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
- ASTM-C1292 - Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
- ASTM-C1322 - Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
- ASTM-C1323 - Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
- ASTM-C1326 - Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
- ASTM-C1327 - Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
- ASTM-C1331 - Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
- ASTM-C1332 - Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
- ASTM-C1337 - Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
- ASTM-C1341 - Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
- ASTM-C1358 - Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures
- ASTM-C1359 - Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
- ASTM-C1360 - Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
- ASTM-C1361 - Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
- ASTM-C1366 - Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
- ASTM-C1368 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature
- ASTM-C1421 - Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
- ASTM-C1424 - Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
- ASTM-C1425 - Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
- ASTM-C1465 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
- ASTM-C1468 - Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
- ASTM-C1469 - Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
- ASTM-C1470 - Standard Guide for Testing the Thermal Properties of Advanced Ceramics
- ASTM-C1495 - Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
- ASTM-C1499 - Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM-C1525 - Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
- ASTM-C1557 - Standard Test Method for Tensile Strength and Young's Modulus of Fibers
- ASTM-C1576 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
- ASTM-C1674 - Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
- ASTM-C1683 - Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
- ASTM-C1684 - Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
- ASTM-C1730 - Standard Test Method for Particle Size Distribution of Advanced Ceramics by X-Ray Monitoring of Gravity Sedimentation
- ASTM-C1773 - Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
- ASTM-C1819 - Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
- ASTM-C1834 - Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures
- ASTM-C1862 - Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
- ASTM-C1869 - Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites
- ASTM-PS70 - Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures (Withdrawn 1999)
BSI:
- BS-EN-1006 - Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties
- BS-EN-1007-1 - Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements
- BS-EN-1007-2 - Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements
- BS-EN-1007-3 - Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements
- BS-EN-1007-4 - Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements
- BS-EN-1007-5 - Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements
- BS-EN-1007-6 - Advanced technical ceramic. Ceramic composites. Methods of test for reinforcements
- BS-EN-1007-7 - Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements
- BS-EN-1071-1 - Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by contact probe filometer
- BS-EN-1071-10 - Advanced technical ceramics. Methods of test for ceramic coatings
- BS-EN-1071-12 - Advanced technical ceramics. Methods of test for ceramic coatings
- BS-EN-1071-13 - Advanced technical ceramics. Methods of test for ceramic coatings
- BS-EN-1071-2 - Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by the crater grinding method
- BS-EN-1071-3 - Advanced technical ceramics. Methods of test for ceramic coatings. Determination of adhesion and other mechanical failure modes by a scratch test
- BS-EN-1071-4 - Advanced technical ceramics. Methods of test for ceramic coatings
- BS-EN-1071-6 - Advanced technical ceramics. Methods of test for ceramic coatings. Determination of the abrasion resistance of coatings by a micro-abrasion wear test
- BS-EN-1071-9 - Advanced technical ceramics. Methods of test for ceramic coatings. Determination of fracture strain
- BS-EN-1159-3 - Advanced technical ceramics. Ceramic composites, thermophysical properties
- BS-EN-12289 - Advanced technical ceramics. Mechanical properties of ceramic composites at ambient temperature. Determination of in-plane shear properties
- BS-EN-12290 - Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of compression properties
- BS-EN-12291 - Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of compression properties
- BS-EN-12789 - Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure. Determination of flexural strength
- BS-EN-13234 - Advanced technical ceramics. Mechanical properties of ceramic composites at ambient temperature. Evaluation of the resistance to crack propagation by notch sensitivity testing
- BS-EN-13235 - Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of creep behaviour
- BS-EN-14186 - Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of elastic properties by an ultrasonic technique
- BS-EN-14232 - Advanced technical ceramics. Terms, definitions and abbreviations
- BS-EN-14425-3 - Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics
- BS-EN-15156 - Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of fatigue properties at constant amplitude
- BS-EN-15157 - Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude
- BS-EN-15158 - Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of fatigue properties at constant amplitude
- BS-EN-15335 - Advanced technical ceramics. Ceramic composites. Determination of elastic properties by resonant beam method up to 2000C
- BS-EN-15365 - Advanced technical ceramics. Mechanical properties of ceramic fibres at high temperature in a non-reactive environment. Determination of creep behaviour by the cold end method
- BS-EN-1892 - Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of tensile properties
- BS-EN-1893 - Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of tensile properties
- BS-EN-1894 - Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of shear strength by compression loading of notched specimens
- BS-EN-623-1 - Advanced technical ceramics. Monolithic ceramics. General and textural properties
- BS-EN-623-3 - Advanced technical ceramics. Monolithic ceramics. General and textural properties
- BS-EN-623-5 - Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of phase volume fraction by evaluation of micrographs
- BS-EN-658-2 - Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature
- BS-EN-658-3 - Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature
- BS-EN-658-4 - Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature
- BS-EN-658-5 - Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature
- BS-EN-725-1 - Advanced technical ceramics. Methods of test for ceramic powders
- BS-EN-725-10 - Advanced technical ceramics. Methods of test for ceramic powders
- BS-EN-725-12 - Advanced technical ceramics. Methods of test for ceramic powders
- BS-EN-725-2 - Advanced technical ceramics. Methods of test for ceramic powders
- BS-EN-725-3 - Advanced technical ceramics. Methods of test for ceramic powders
- BS-EN-725-4 - Advanced technical ceramics. Methods of test for ceramic powders
- BS-EN-725-5 - Advanced technical ceramics. Methods of test for ceramic powders
- BS-EN-725-6 - Determination of the Specific Surface Area
- BS-EN-725-7 - Determination of the Absolute Density
- BS-EN-725-8 - Advanced technical ceramics. Methods of test for ceramic powders. Determination of tapped bulk density
- BS-EN-725-9 - Advanced technical ceramics. Methods of test for ceramic powders. Determination of untapped bulk density
- BS-EN-820-1 - Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties
- BS-EN-820-2 - Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties
- BS-EN-820-3 - Advanced technical ceramics. Monolithic ceramics. Thermomechanical properties
- BS-EN-820-4 - Advanced technical ceramics. Thermomechanical properties of monolithic ceramics
- BS-EN-820-5 - Advanced technical ceramics. Thermomechanical properties of monolithic ceramics
- BS-EN-821-2 - Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties
- BS-EN-843-1 - Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature
- BS-EN-843-2 - Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature
- BS-EN-843-3 - Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature
- BS-EN-843-4 - Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature
- BS-EN-843-5 - Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature
- BS-EN-843-6 - Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature
- BS-EN-843-7 - Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature
- BS-EN-843-8 - Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature
- BS-EN-ISO-13383-1 - Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of grain size and size distribution
- BS-EN-ISO-13383-2 - Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of phase volume fraction by evaluation of micrographs
- BS-EN-ISO-14544 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature. Determination of compression properties
- BS-EN-ISO-14574 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature. Determination of tensile properties
- BS-EN-ISO-14604 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for ceramic coatings. Determination of fracture strain
- BS-EN-ISO-14629 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of flowability of ceramic powders
- BS-EN-ISO-14705 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for hardness of monolithic ceramics at room temperature
- BS-EN-ISO-15732 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
- BS-EN-ISO-17092 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions
- BS-EN-ISO-17092-TC - Tracked Changes. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions
- BS-EN-ISO-17138 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of flexural strength
- BS-EN-ISO-17139 - Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of thermal expansion
- BS-EN-ISO-17140 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of fatigue properties at constant amplitude
- BS-EN-ISO-17142 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude
- BS-EN-ISO-17161 - Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Determination of the degree of misalignment in uniaxial mechanical tests
- BS-EN-ISO-17172 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of compaction properties of ceramic powders
- BS-EN-ISO-17562 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for linear thermal expansion of monolithic ceramics by push-rod technique
- BS-EN-ISO-17947 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of fine silicon nitride powders
- BS-EN-ISO-18452 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of thickness of ceramic films by contact-probe profilometer
- BS-EN-ISO-18608 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure. Determination of the resistance to crack propagation by notch sensitivity testing
- BS-EN-ISO-18610 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure. Determination of elastic properties by ultrasonic technique
- BS-EN-ISO-18753 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of absolute density of ceramic powders by pycnometer
- BS-EN-ISO-18753-TC - Tracked Changes. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of absolute density of ceramic powders by pycnometer
- BS-EN-ISO-18754 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of density and apparent porosity
- BS-EN-ISO-18755 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of thermal diffusivity of monolithic ceramics by flash method
- BS-EN-ISO-18756 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
- BS-EN-ISO-18757 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of specific surface area of ceramic powders by gas adsorption using the BET method
- BS-EN-ISO-19628 - Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of specific heat capacity
- BS-EN-ISO-19629 - Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of unidimensional thermal diffusivity by flash method
- BS-EN-ISO-19630 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for reinforcements. Determination of tensile properties of filaments at ambient temperature
- BS-EN-ISO-19634 - Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Notations and symbols
- BS-EN-ISO-20323 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure. Determination of tensile properties of tubes
- BS-EN-ISO-20502 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of adhesion of ceramic coatings by scratch testing
- BS-EN-ISO-20504 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of compressive properties
- BS-EN-ISO-20504-TC - Tracked Changes. Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of compressive properties
- BS-EN-ISO-20509 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of oxidation resistance of nonoxide monolithic ceramics
- BS-EN-ISO-21813 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of high purity barium titanate powders
- BS-EN-ISO-21814 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of aluminium nitride powders
- BS-EN-ISO-22459 - Fine ceramics (advanced ceramics, advanced technical ceramics). Reinforcement of ceramic composites. Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature
- BS-EN-ISO-22459-TC - Tracked Changes. Fine ceramics (advanced ceramics, advanced technical ceramics). Reinforcement of ceramic composites. Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature
- BS-EN-ISO-23145-1 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders. Tap density
- BS-EN-ISO-23145-2 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders
- BS-EN-ISO-23146 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test methods for fracture toughness of monolithic ceramics. Single-edge V-notch beam (SEVNB) method
- BS-EN-ISO-23739 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of zirconium oxide powders
- BS-EN-ISO-24370-TC - Tracked Changes. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method
- BS-EN-ISO-26423 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of coating thickness by crater-grinding method
- BS-EN-ISO-26424 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of the abrasion resistance of coatings by a micro-scale abrasion test
- BS-EN-ISO-26443 - Fine ceramics (advanced ceramics, advanced technical ceramics). Rockwell indentation test for evaluation of adhesion of ceramic coatings
- BS-EN-ISO-26443-TC - Tracked Changes. Fine ceramics (advanced ceramics, advanced technical ceramics). Rockwell indentation test for evaluation of adhesion of ceramic coatings
- BS-ISO-10676 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen
- BS-ISO-10678-TC - Tracked Changes. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
- BS-ISO-11894-1 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for conductivity measurement of ion-conductive fine ceramics
- BS-ISO-13125 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antifungal activity of semiconducting photocatalytic materials
- BS-ISO-13383-1 - Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of grain size and size distribution
- BS-ISO-13383-2 - Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of phase volume fraction by evaluation of micrographs
- BS-ISO-13915 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for optical properties of ceramic phosphors for white light-emitting diodes with reference materials
- BS-ISO-14544 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature. Determination of compression properties
- BS-ISO-14603 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for open-hole tension of continuous fibre-reinforced ceramic matrix composites at room temperature
- BS-ISO-14604 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for ceramic coatings. Determination of fracture strain
- BS-ISO-14605 - Fine ceramics (advanced ceramics, advanced technical ceramics). Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
- BS-ISO-14610 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of porous ceramics at room temperature
- BS-ISO-14627 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method
- BS-ISO-14628 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for rolling contact fatigue of silicon nitride ceramics at room temperature by balls-on-flat method
- BS-ISO-14629 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of flowability of ceramic powders
- BS-ISO-14703 - Fine ceramics (advanced ceramics, advanced technical ceramics). Sample preparation for the determination of particle size distribution of ceramic powders
- BS-ISO-14705 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for hardness of monolithic ceramics at room temperature
- BS-ISO-15490 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for tensile strength of monolithic ceramics at room temperature
- BS-ISO-15733 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure. Determination of tensile properties
- BS-ISO-17094 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antibacterial activity of semiconducting photocatalytic materials under indoor lighting environment
- BS-ISO-17095 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for interfacial bond strength of ceramic materials at elevated temperatures
- BS-ISO-17138 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of flexural strength
- BS-ISO-17140 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of fatigue properties at constant amplitude
- BS-ISO-17142 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude
- BS-ISO-17161 - Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Determination of the degree of misalignment in uniaxial mechanical tests
- BS-ISO-17162 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of monolithic ceramics at room temperature. Determination of compressive strength
- BS-ISO-17167 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of monolithic ceramics at room temperature. Determination of flexural strength by the ring-on-ring test
- BS-ISO-17168-1 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment
- BS-ISO-17168-2 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment
- BS-ISO-17168-3 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment
- BS-ISO-17168-4 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment
- BS-ISO-17168-5 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment
- BS-ISO-17170 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for spherical indentation of porous ceramics
- BS-ISO-17172 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of compaction properties of ceramic powders
- BS-ISO-17561 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
- BS-ISO-17841 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal fatigue of fine ceramics substrate
- BS-ISO-17859 - Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method of piezoelectric strain at high electric field
- BS-ISO-17860 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of drying loss of ceramic granules
- BS-ISO-17861 - Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method of spectral transmittance of fine ceramics thin films under humid condition
- BS-ISO-17942 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of boron nitride powders
- BS-ISO-17947 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of fine silicon nitride powders
- BS-ISO-18061 - Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics). Determination of antiviral activity of semiconducting photocatalytic materials. Test method using bacteriophage Q-beta
- BS-ISO-18071 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of antiviral activity of semiconducting photocatalytic materials under indoor lighting environment. Test method using bacteriophage Q-beta
- BS-ISO-18550 - Fine ceramics (advanced ceramics, advanced technical ceramics). Testing method for macroheterogeneity in microstructure
- BS-ISO-18558 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of ceramic tube and rings
- BS-ISO-18560-1 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials by test chamber method under indoor lighting environment
- BS-ISO-18591 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of compressive strength of ceramic granules
- BS-ISO-18608 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature. Evaluation of the resistance to crack propagation by notch sensitivity testing
- BS-ISO-18610 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure. Determination of elastic properties by ultrasonic technique
- BS-ISO-18754 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of density and apparent porosity
- BS-ISO-18755 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of thermal diffusivity of monolithic ceramics by flash method
- BS-ISO-19587 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at elevated temperature in air atmospheric pressure. Determination of in-plane shear strength
- BS-ISO-19603 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of thick ceramic coatings
- BS-ISO-19604 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature. Determination of stress-rupture time diagram under constant tensile loading
- BS-ISO-19606 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for surface roughness of fine ceramic films by atomic force microscopy
- BS-ISO-19606-TC - Tracked Changes. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for surface roughness of fine ceramic films by atomic force microscopy
- BS-ISO-19613 - Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement of viscosity of ceramic slurry by use of a rotational viscometer
- BS-ISO-19622 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for piezoelectric constant d33 of piezoelectric ceramics by direct quasi-static method
- BS-ISO-19628 - Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of specific heat capacity
- BS-ISO-19629 - Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of unidimensional thermal diffusivity by flash method
- BS-ISO-19630 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for reinforcements. Determination of tensile properties of filaments at ambient temperature
- BS-ISO-19634 - Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Notations and symbols
- BS-ISO-19635 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antialgal activity of semiconducting photocatalytic materials
- BS-ISO-19652 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for complete decomposition performance of semiconducting photocatalytic materials under indoor lighting environment. Decomposition of acetaldehyde
- BS-ISO-19674 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for ceramic coatings. Determination of internal stress in ceramic coatings by application of the Stoney formula
- BS-ISO-19722 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determination of photocatalytic activity on semiconducting photocatalytic materials by dissolved oxygen consumption
- BS-ISO-19810 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for self-cleaning performance of semiconducting photocatalytic materials under indoor lighting environment. Measurement of water contact angle
- BS-ISO-19810-TC - Tracked Changes. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for self-cleaning performance of semiconducting photocatalytic materials under indoor lighting environment. Measurement of water contact angle
- BS-ISO-20323 - Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure. Determination of tensile properties of tubes
- BS-ISO-20343 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus of thick ceramic coatings at elevated temperature
- BS-ISO-20351 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for optical properties of ceramic phosphors for white light-emitting diodes using an integrating sphere
- BS-ISO-20351-TC - Tracked Changes. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for optical properties of ceramic phosphors for white light-emitting diodes using an integrating sphere
- BS-ISO-20379 - Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement of thixotropic behaviour of ceramic slurry by use of a rotational viscometer
- BS-ISO-20407 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for interfacial tensile and shear fatigue properties of ceramic joining loaded in constant amplitude at room temperature
- BS-ISO-20501 - Fine ceramics (advanced ceramics, advanced technical ceramics). Weibull statistics for strength data
- BS-ISO-20507 - Fine ceramics (advanced ceramics, advanced technical ceramics). Vocabulary
- BS-ISO-20507-TC - Tracked Changes. Fine ceramics (advanced ceramics, advanced technical ceramics). Vocabulary
- BS-ISO-20508 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of light transmittance of ceramic films with transparent substrate
- BS-ISO-20808 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
- BS-ISO-21066 - Fine ceramics (advanced ceramics, advanced technical ceramics). Qualitative and semiquantitative assessment of the photocatalytic activities of surfaces by the reduction of resazurin in a deposited ink film
- BS-ISO-21113 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramic thin plates at room temperature
- BS-ISO-21618 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture resistance of monolithic ceramics at room temperature by indentation fracture (IF) method
- BS-ISO-21712 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural bond strength of ceramics
- BS-ISO-21713 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of elastic modulus of ceramics at high temperature by thin wall C-ring method
- BS-ISO-21714 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining density of ceramic coatings
- BS-ISO-21813 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of high purity barium titanate powders
- BS-ISO-21814 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of aluminium nitride powders
- BS-ISO-21819-1 - Fine ceramics (advanced ceramics, advanced technical ceramics). Characteristic of piezoelectric properties under high-load conditions
- BS-ISO-21819-2 - Fine ceramics (advanced ceramics, advanced technical ceramics). Characteristic of piezoelectric properties under high-load conditions
- BS-ISO-21820 - Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet photoluminescence image test method for analysing polytypes of boron- and nitrogen-doped SiC crystals
- BS-ISO-21821 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of densification properties of ceramic powders on natural sintering
- BS-ISO-21822 - Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement of iso-electric point of ceramic powder
- BS-ISO-21859 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for plasma resistance of ceramic components in semiconductor manufacturing equipment
- BS-ISO-22197-1 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials
- BS-ISO-22197-1-TC - Tracked Changes. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials
- BS-ISO-22197-4 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials
- BS-ISO-22197-4-TC - Tracked Changes. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials
- BS-ISO-22197-5 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials
- BS-ISO-22197-5-TC - Tracked Changes. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials
- BS-ISO-22278 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for crystalline quality of single-crystal thin film (wafer) using XRD method with parallel X-ray beam
- BS-ISO-22459 - Fine ceramics (advanced ceramics, advanced technical ceramics). Reinforcement of ceramic composites. Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature
- BS-ISO-22551 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bacterial reduction rate by semiconducting photocatalytic materials under indoor lighting environment. Semi-dry method for estimating antibacterial activity on the actual environmental bacteria contamination surface
- BS-ISO-22601 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determination of phenol oxidative decomposition performance of semiconducting photocatalytic materials by quantitative analysis of total organic carbon (TOC)
- BS-ISO-23114 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining bonding strength of ceramic coatings
- BS-ISO-23145-1 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders. Tap density
- BS-ISO-23145-2 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders. Untapped density
- BS-ISO-23242 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
- BS-ISO-23331 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for total electrical conductivity of conductive fine ceramics
- BS-ISO-23458 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining thermal expansion coefficient and residual stress of CVD ceramic coatings
- BS-ISO-23737 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for evaluating wear and friction characteristics of fine ceramic thin films under dry and humid conditions
- BS-ISO-23738 - Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method of spectral reflectance of fine ceramic thin films under humid conditions
- BS-ISO-23739 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of zirconium oxide powders
- BS-ISO-23946 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test methods for optical properties of ceramic phosphors for white light-emitting diodes using a gonio-spectrofluorometer
- BS-ISO-24046 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of tests for reinforcements. Determination of the tensile properties of resin-impregnated yarns
- BS-ISO-24687 - Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement of Seebeck coefficient and electrical conductivity of bulk-type thermoelectric materials at room and high temperatures
- BS-ISO-26423 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of coating thickness by crater-grinding method
- BS-ISO-26424 - Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of the abrasion resistance of coatings by a micro-scale abrasion test
- BS-ISO-26443 - Fine ceramics (advanced ceramics, advanced technical ceramics). Rockwell indentation test for evaluation of adhesion of ceramic coatings
- BS-ISO-26602 - Fine ceramics (advanced ceramics, advanced technical ceramics). Silicon nitride materials for rolling bearing balls and rollers
- BS-ISO-27447 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antibacterial activity of semiconducting photocatalytic materials
- BS-ISO-27448 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for self-cleaning performance of semiconducting photocatalytic materials. Measurement of water contact angle
- BS-ISO-3169 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of impurities in aluminium oxide powders using inductively coupled plasma-optical emission spectrometry
- BS-ISO-3180 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of calcium-phosphate-based powders for non-biomedical applications
- BS-ISO-4825-1 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal property measurements of metalized ceramic substrates
- BS-ISO-5189 - Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of metal impurities in silicon dioxide powders using inductively coupled plasma-optical emission spectrometry
- BS-ISO-5618-1 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for GaN crystal surface defects
- BS-ISO-5618-2 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for GaN crystal surface defects
- BS-ISO-5712 - Fine ceramics (advanced ceramics, advanced technical ceramics). Method for measuring the power generation characteristics of piezoelectric resonant device for stand-alone power source
- BS-ISO-5803 - Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determination of monoclinic phase in zirconia
- DD-CEN-1071-11 - Advanced technical ceramics. Methods of test for ceramic coatings
- DD-CEN-1071-7 - Advanced technical ceramics. Methods of test for ceramic coatings. Determination of hardness and Young's modulus by instrumented indentation testing
- DD-CEN-1071-8 - Advanced technical ceramics. Methods of test for ceramic coatings
- DD-CEN-13233 - Advanced Technical Ceramics, Notations & Symbols
- DD-CEN-14425-1 - Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics
- DD-CEN-14425-3 - Advanced Technical Ceramics, Test Methods for Determinationof Fracture Toughness of M
- DD-CEN-14425-5 - Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics
- DD-CEN-15658 - Advanced technical ceramics. Mechanical properties of ceramic fibres at high temperature under non-reactive environment. Determination of creep behaviour by the hot end method
- DD-CEN-15867 - Advanced technical ceramics. Ceramic composites. Guide to the determination of the degree of misalignment in uniaxial mechanical tests
- DD-CEN-15880 - Advanced technical ceramics. Ceramic composites. Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre pushout method
- DD-CEN-15881 - Advanced technical ceramics. Ceramic composites. Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites
- DD-CEN-843-6 - Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature
- DD-CEN-843-9 - Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature
- DD-ENV-1006 - Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties
- DD-ENV-1007-4 - Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements
- DD-ENV-1071-1 - Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by contact probe profilometer
- DD-ENV-1071-3 - Advanced technical ceramics. Methods of test for ceramic coatings
- DD-ENV-1071-5 - Advanced technical ceramics. Methods of test for ceramic coatings. Determination of porosity
- DD-ENV-1071-6 - Advanced technical ceramics. Methods of test for ceramic coatings
- DD-ENV-12289 - Advanced technical ceramics. Mechanical properties of ceramic composites at ambient temperature. Determination of in-plane shear properties
- DD-ENV-12290 - Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of compression properties
- DD-ENV-12291 - Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of compression properties
- DD-ENV-12788 - Advanced Technical Ceramics, Mechanical Properties of Ceramic Composites at High Tempe
- DD-ENV-12923-2 - Advanced technical ceramics. Monolithic ceramics
- DD-ENV-13233 - Advanced Technical Ceramics, Ceramic Composites, Notations & Symbols
- DD-ENV-13234 - Advanced technical ceramics. Ceramic composites. Mechanical properties at ambient temperatures. Evaluation of the resistance to crack propagation by notch sensitivity testing
- DD-ENV-13235 - Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of creep behaviour
- DD-ENV-14186 - Advanced technical ceramics. Ceramic composites. Mechanical properties at room temperature, determination of elastic properties by an ultrasonic technique
- DD-ENV-14226 - Advanced technical ceramics. Test methods for ceramic powders. Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-AES)
- DD-ENV-14232 - Advanced technical ceramics. Terms, definitions and abbreviations
- DD-ENV-14273 - Advanced technical ceramics. Ceramic powders. Determination of crystalline phases in zirconia
- DD-ENV-14312 - Advanced technical ceramics. Ceramic powders. Determination of flowability behaviour of ceramic granules
- DD-ENV-1892 - Advanced Technical Ceramics, Mechanical Properties of Ceramic Composites at High Tempe
- DD-ENV-1893 - Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of tensile properties
- DD-ENV-1894 - Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of shear strength by compression loading of notched specimens
- DD-ENV-623-3 - Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of grain size
- DD-ENV-623-5 - Advanced technical ceramics. Monolithic ceramics. General and textural properties
- DD-ENV-658-2 - Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of compressive strength
- DD-ENV-658-6 - Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of shear strength by double-punch shearing
- DD-ENV-725-11 - Determination of the Densification on Natural Sintering, Advanced Technical Ceramics,
- DD-ENV-820-4 - Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties
- PD-CEN-13233 - Advanced technical ceramics. Notations and symbols
- PD-ISO-6857 - Fine ceramics (advanced ceramics, advanced technical ceramics). Physical properties of ceramic composites. Guidelines for determination of void and fibre contents in polished cross section by image analysis
ISO:
- ISO-10676 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen
- ISO-10677 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Ultraviolet light source for testing semiconducting photocatalytic materials
- ISO-10678 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
- ISO-11894-1 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for conductivity measurement of ion-conductive fine ceramics - Part 1: Oxide-ion-conducting solid electrolytes
- ISO-13124 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for interfacial bond strength of ceramic materials
- ISO-13125 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antifungal activity of semiconducting photocatalytic materials
- ISO-13383-1 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution
- ISO-13383-2 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 2: Determination of phase volume fraction by evaluation of micrographs
- ISO-13915 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for optical properties of ceramic phosphors for white light-emitting diodes with reference materials
- ISO-14544 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of compression properties
- ISO-14574 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties
- ISO-14603 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for open-hole tension of continuous fibre-reinforced ceramic matrix composites at room temperature
- ISO-14604 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for ceramic coatings - Determination of fracture strain
- ISO-14605 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
- ISO-14610 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of porous ceramics at room temperature
- ISO-14627 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method
- ISO-14628 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for rolling contact fatigue of silicon nitride ceramics at room temperature by balls-on-flat method
- ISO-14629 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of flowability of ceramic powders
- ISO-14703 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders
- ISO-14704 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
- ISO-14705 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature
- ISO-15165 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Classification system
- ISO-15490 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for tensile strength of monolithic ceramics at room temperature
- ISO-15732 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
- ISO-15733 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of tensile properties
- ISO-16581 - Resilient and laminate floor coverings - Determination of the effect of simulated movement of a furniture leg
- ISO-17092 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions
- ISO-17094 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antibacterial activity of semiconducting photocatalytic materials under indoor lighting environment
- ISO-17095 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for interfacial bond strength of ceramic materials at elevated temperatures
- ISO-17138 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of flexural strength
- ISO-17139 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of thermal expansion
- ISO-17140 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude
- ISO-17142 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude
- ISO-17161 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Determination of the degree of misalignment in uniaxial mechanical tests
- ISO-17162 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of monolithic ceramics at room temperature - Determination of compressive strength
- ISO-17167 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of monolithic ceramics at room temperature - Determination of flexural strength by the ring-on-ring test
- ISO-17168-1 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment - Part 1: Removal of nitric oxide
- ISO-17168-2 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment - Part 2: Removal of acetaldehyde
- ISO-17168-3 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment - Part 3: Removal of toluene
- ISO-17168-4 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment - Part 4: Removal of formaldehyde
- ISO-17168-5 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment - Part 5: Removal of methyl mercaptan
- ISO-17170 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for spherical indentation of porous ceramics
- ISO-17172 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of compaction properties of ceramic powders
- ISO-17561 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
- ISO-17562 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique
- ISO-17565 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature
- ISO-17841 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for thermal fatigue of fine ceramics substrate
- ISO-17859 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement method of piezoelectric strain at high electric field
- ISO-17860 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of drying loss of ceramic granules
- ISO-17861 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement method of spectral transmittance of fine ceramics thin films under humid condition
- ISO-17942 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of boron nitride powders
- ISO-17947 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of fine silicon nitride powders
- ISO-18061 - Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Determination of antiviral activity of semiconducting photocatalytic materials - Test method using bacteriophage Q-beta
- ISO-18071 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of antiviral activity of semiconducting photocatalytic materials under indoor lighting environment - Test method using bacteriophage Q-beta
- ISO-18452 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer
- ISO-18550 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Testing method for macro-heterogeneity in microstructure
- ISO-18558 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of ceramic tube and rings
- ISO-18560-1 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials by test chamber method under indoor lighting environment - Part 1: Removal of formaldehyde
- ISO-18591 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of compressive strength of ceramic granules
- ISO-18608 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of the resistance to crack propagation by notch sensitivity testing
- ISO-18610 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of elastic properties by ultrasonic technique
- ISO-18753 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer
- ISO-18754 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of density and apparent porosity
- ISO-18755 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thermal diffusivity of monolithic ceramics by flash method
- ISO-18756 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
- ISO-18757 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method
- ISO-19587 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at elevated temperature in air atmospheric pressure - Determination of in-plane shear strength
- ISO-19603 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of thick ceramic coatings
- ISO-19604 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of stress-rupture time diagram under constant tensile loading
- ISO-19606 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for surface roughness of fine ceramic films by atomic force microscopy
- ISO-19613 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement of viscosity of ceramic slurry by use of a rotational viscometer
- ISO-19618 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer
- ISO-19622 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for piezoelectric constant d33 of piezoelectric ceramics by direct quasi-static method
- ISO-19628 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity
- ISO-19629 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method
- ISO-19630 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature
- ISO-19634 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Notations and symbols
- ISO-19635 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antialgal activity of semiconducting photocatalytic materials
- ISO-19652 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for complete decomposition performance of semiconducting photocatalytic materials under indoor lighting environment - Decomposition of acetaldehyde
- ISO-19674 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for ceramic coatings - Determination of internal stress in ceramic coatings by application of the Stoney formula
- ISO-19722 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determination of photocatalytic activity on semiconducting photocatalytic materials by dissolved oxygen consumption
- ISO-19810 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for self-cleaning performance of semiconducting photocatalytic materials under indoor lighting environment - Measurement of water contact angle
- ISO-20323 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of tensile properties of tubes
- ISO-20343 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus of thick ceramic coatings at elevated temperature
- ISO-20351 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere
- ISO-20379 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement of thixotropic behaviour of ceramic slurry by use of a rotational viscometer
- ISO-20407 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for interfacial tensile and shear fatigue properties of ceramic joining loaded in constant amplitude at room temperature
- ISO-20501 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Weibull statistics for strength data
- ISO-20502 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing
- ISO-20504 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of compressive properties
- ISO-20505 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of the interlaminar shear strength and shear modulus of continuous-fibre-reinforced composites by the compression of double-notched test pieces and by the Iosipescu test
- ISO-20506 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the in-plane shear strength of continuous-fibre-reinforced composites at ambient temperature by the Iosipescu test
- ISO-20507 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Vocabulary
- ISO-20508 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of light transmittance of ceramic films with transparent substrate
- ISO-20509 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of oxidation resistance of non-oxide monolithic ceramics
- ISO-20808 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
- ISO-21066 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Qualitative and semiquantitative assessment of the photocatalytic activities of surfaces by the reduction of resazurin in a deposited ink film
- ISO-21113 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramic thin plates at room temperature
- ISO-21618 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture resistance of monolithic ceramics at room temperature by indentation fracture (IF) method
- ISO-21712 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural bond strength of ceramics
- ISO-21713 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of elastic modulus of ceramics at high temperature by thin wall C-ring method
- ISO-21714 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining density of ceramic coatings
- ISO-21814 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of aluminium nitride powders
- ISO-21819-1 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Characteristic of piezoelectric properties under high-load conditions - Part 1: Resonant-antiresonant method under high-temperature conditions
- ISO-21819-2 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Characteristic of piezoelectric properties under high-load conditions - Part 2: Electrical transient response method under high vibration levels
- ISO-21820 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Ultraviolet photoluminescence image test method for analysing polytypes of boron- and nitrogen-doped SiC crystals
- ISO-21821 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of densification properties of ceramic powders on natural sintering
- ISO-21822 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement of iso-electric point of ceramic powder
- ISO-21859 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for plasma resistance of ceramic components in semiconductor manufacturing equipment
- ISO-21971 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of hoop tensile properties of tubes
- ISO-22197-1 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 1: Removal of nitric oxide
- ISO-22197-2 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 2: Removal of acetaldehyde
- ISO-22197-3 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 3: Removal of toluene
- ISO-22197-4 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 4: Removal of formaldehyde
- ISO-22197-5 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 5: Removal of methyl mercaptan
- ISO-22214 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for cyclic bending fatigue of monolithic ceramics at room temperature
- ISO-22215 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for tensile creep of monolithic ceramics
- ISO-22278 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for crystalline quality of single-crystal thin film (wafer) using XRD method with parallel X-ray beam
- ISO-22459 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of ceramic composites - Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature
- ISO-22551 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bacterial reduction rate by semiconducting photocatalytic materials under indoor lighting environment - Semi-dry method for estimating antibacterial activity on the actual environmental bacteria contamination surface
- ISO-22601 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determination of phenol oxidative decomposition performance of semiconducting photocatalytic materials by quantitative analysis of total organic carbon (TOC)
- ISO-23114 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining bonding strength of ceramic coatings
- ISO-23145-1 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density
- ISO-23145-2 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density
- ISO-23146 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edge V-notch beam (SEVNB) method
- ISO-23242 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
- ISO-23331 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for total electrical conductivity of conductive fine ceramics
- ISO-23458 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining thermal expansion coefficient and residual stress of CVD ceramic coatings
- ISO-23737 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for evaluating wear and friction characteristics of fine ceramic thin films under dry and humid conditions
- ISO-23738 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement method of spectral reflectance of fine ceramic thin films under humid conditions
- ISO-23739 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of zirconium oxide powders
- ISO-23946 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test methods for optical properties of ceramic phosphors for white light-emitting diodes using a gonio-spectrofluorometer
- ISO-24046 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of tests for reinforcements - Determination of the tensile properties of resin-impregnated yarns
- ISO-24235 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of particle size distribution of ceramic powders by laser diffraction method
- ISO-24369 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of content of coarse particles in ceramic powders by wet sieving method
- ISO-24370 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method
- ISO-24448 - Fine ceramics (advanced ceramics, advanced technical ceramics) - LED light source for testing semiconducting photocatalytic materials used under indoor lighting environment
- ISO-24687 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement of Seebeck coefficient and electrical conductivity of bulk-type thermoelectric materials at room and high temperatures
- ISO-26423 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of coating thickness by crater-grinding method
- ISO-26424 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test
- ISO-26443 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings
- ISO-26602 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Silicon nitride materials for rolling bearing balls and rollers
- ISO-27447 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antibacterial activity of semiconducting photocatalytic materials
- ISO-27448 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for self-cleaning performance of semiconducting photocatalytic materials - Measurement of water contact angle
- ISO-28703 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for thermal-shock resistance of porous ceramics
- ISO-28704 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for cyclic bending fatigue of porous ceramics at room temperature
- ISO-3169 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of impurities in aluminium oxide powders using inductively coupled plasma-optical emission spectrometry
- ISO-3180 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of calcium-phosphate-based powders for non-biomedical applications
- ISO-4825-1 - Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for thermal property measurements of metalized ceramic substrates - Part 1: Evaluation of thermal resistance for use in power modules
- ISO-5189 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of metal impurities in silicon dioxide powders using inductively coupled plasma-optical emission spectrometry
- ISO-5618-1 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for GaN crystal surface defects - Part 1: Classification of defects
- ISO-5618-2 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for GaN crystal surface defects - Part 2: Method for determining etch pit density
- ISO-5712 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Method for measuring the power generation characteristics of piezoelectric resonant devices for stand-alone power sources
- ISO-5722 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining tensile and shear creep of ceramic adhesive
- ISO-6857 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Physical properties of ceramic composites - Guidelines for determination of void and fibre contents in polished cross section by image analysis
Other SDOs:
- DIN-EN-1007-5 - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature; German versi
- DIN-EN-1071-1 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe profilometer; German version EN 1071-1:2003
- DIN-EN-1071-2 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method; German version EN 1071-2:2002
- DIN-EN-1071-3 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test; German version EN 1071-3:2005
- DIN-EN-1071-4 - Part 4: Determination of Chemical Composition by Electron Probe Microanalysis (Epma),
- DIN-EN-1159-1 - Part 1: Determination of Thermal Expansion, Advanced Technical Ceramics - Ceramic Comp
- DIN-EN-1159-3 - Part 3: Determination of Specific Heat Capacity, Advanced Technical Ceramics - Ceramic
- DIN-EN-12289 - Advanced Technical Ceramics, Mechanical Properties of Ceramic Composites at Ambient T
- DIN-EN-12290 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties
- DIN-EN-12291 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties
- DIN-EN-12788 - Advanced Technical Ceramics, Mechanical Properties of Ceramic Composites at High Tempe
- DIN-EN-12923-1 - Part 1: General Practice for Undertaking Corrosion Tests, Advanced Technical Ceramics
- DIN-EN-13234 - Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at Ambient T
- DIN-EN-13235 - Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at High Temp
- DIN-EN-15156 - Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude; German version EN 15156:2006
- DIN-EN-15157 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude; German Version EN 15157:2006
- DIN-EN-15158 - Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at Hight Tem
- DIN-EN-1892 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties; German version EN 1892:2005
- DIN-EN-1893 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties; German version EN 1893:2005
- DIN-EN-1894 - Advanced Technical Ceramics, Mechanical Properties of Ceramic Composites at High Tempe
- DIN-EN-623-1 - Part 1: Determination of the Presence of Defects by Dye Penetration, Advanced Technica
- DIN-EN-623-3 - Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the linear intercept method)
- DIN-EN-623-4 - Part 4: Determination of Surface Roughness, Advanced Techniccal Ceramics, Monolithic C
- DIN-EN-658-2 - Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties
- DIN-EN-725-11 - Part 11: Determination of Densification on Natural Sintering, Advanced Technical Ceram
- DIN-EN-725-3 - Part 3: Determination of the Oxygen Content of Non-Oxides by Thermal Extraction With A
- DIN-EN-725-4 - Part 4: Determination of Oxygen Content in Aluminium Nitride by Xrf Analysis, Advanced
- DIN-EN-725-5 - Part 5: Determination of the Particle Size Distribution, Advanced Technical Ceramics,
- DIN-EN-725-8 - Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density
- DIN-EN-725-9 - Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of untapped bulk density
- DIN-EN-820-3 - Part 3: Determination of Resistance To Thermal Shock by Water Quenching, Advanced Tech
- DIN-EN-821-3 - Part 3: Determination of Specific Heat Capacity, Advanced Technical Ceramics, Monolith
- DIN-EN-843-1 - Part 1: Determination of Flexural Strength, Advanced Technical Ceramics - Mechanical P
- DIN-EN-843-2 - Part 2: Determination of Young's Modulus, Shear Modulus & Poisson's Ratio, Advanced Te
- DIN-EN-843-3 - Part 3: Determination of Subcritical Crack Growth Parameters From Constant Stressing R
- DIN-EN-843-4 - Part 4: Vickers, Knoop & Rockwell Superficial Hardness, Advanced Technical Ceramics, M
- DIN-EN-843-5 - Part 5: Statistical Analysis, Advanced Technical Ceramics - Mechanical Properties Of
- DIN-EN-ISO-15732 - Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics), Test Method for Fractu
- DIN-EN-ISO-18753 - Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Determination of Abso
- DIN-EN-ISO-18756 - Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics), Determination of Fract
- DIN-EN-ISO-18757 - Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Determination of Spec
- EN-1006 - Advanced Technical Ceramics - Monolithic Ceramics - Guidance on the Selection of Test
- EN-1007-5 - Part 5: Determination of Distribution of Tensile Strength & of Tensile Strain To Fail
- EN-1007-7 - Part 7: Determination of the Distribution of Tensile Strength & of Tensile Strain To F
- EN-1071-10 - Part 10: Determination of Coating Thickness by Cross Sectioning, Advanced Technical Ce
- EN-1071-12 - Part 12: Reciprocating Wear Test, Advanced Technical Ceramics - Methods of Test for Ce
- EN-1071-13 - Part 13: Determination of Wear Rate by the Pin-On-Disk Method, Advanced Technical Cera
- EN-1071-3 - Part 3: Determination of Adhesion & Other Mechanical Failure Modes by a Scratch Test,
- EN-1071-4 - Part 4: Determination of Chemical Composition by Electron Probe Microanalysis (Epma),
- EN-1071-6 - Advanced Technical Ceramics, Methods of Test for Ceramic Coatings, Determination of Th
- EN-1071-9 - Part 9: Determination of Fracture Strain, Advanced Technical Ceramics - Methods of Tes
- EN-1159-1 - Part 1: Determination of Thermal Expansion, Advanced Technical Ceramics - Ceramic Comp
- EN-1159-3 - Part 3: Determination of Specific Heat Capacity, Advanced Technical Ceramics - Ceramic
- EN-12289 - Advanced Technical Ceramics, Mechanical Properties of Ceramic Composites at Ambient Te
- EN-12290 - Advanced Technical Ceramics, Mechanical Properties of Ceramic Composites at High Tempe
- EN-13234 - Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at Ambient T
- EN-13235 - Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at High Temp
- EN-14186 - Advanced Technical Ceramics, Mechanical Properties of Ceramic Composites at Room Tempe
- EN-14232 - Advanced Technical Ceramics - Terms, Definitions & Abbreviations
- EN-14425-3 - Advanced Technical Ceramics - Test Methods for Determination of Fracture Toughness Of
- EN-15156 - Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at Room Temp
- EN-15157 - Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at High Temp
- EN-15158 - Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at High Temp
- EN-15335 - Advanced Technical Ceramics - Ceramic Composites - Determination of Elastic Properties
- EN-15365 - Advanced Technical Ceramics - Mechanical Properties of Ceramic Fibres at High Temperat
- EN-1892 - Advanced Technical Ceramics, Mechanical Properties of Ceramic Composites at High Tempe
- EN-1893 - Advanced Technical Ceramics, Mechanical Properties of Ceramic Composites at High Tempe
- EN-1894 - Advanced Technical Ceramics, Mechanical Properties of Ceramic Composites at High Tempe
- EN-623-3 - Part 3: Determination of Grain Size & Size Distribution (Characterized by the Linear I
- EN-623-5 - Part 5: Determination of Phase Volume Fraction by Evaluation of Micrographs, Advanced
- EN-658-3 - Part 3: Determination of Flexural Strength, Advanced Technical Ceramics, Mechanical Pr
- EN-658-5 - Part 5: Determination of Interlaminar Shear Strength by Short Span Bend Test (Three Po
- EN-725-1 - Part 1: Determination of Impurities in Alumina, Advanced Technical Ceramics - Methods
- EN-725-10 - Part 10: Determination of Compaction Properties, Advanced Technical Ceramics - Methods
- EN-725-2 - Part 2: Determination of Impurities in Barium Titanate, Advanced Technical Ceramics -
- EN-725-3 - Part 3: Determination of the Oxygen Content of Non-Oxides by Thermal Extraction With A
- EN-725-4 - Part 4: Determination of Oxygen Content in Aluminium Nitride by Xrf Analysis, Advanced
- EN-725-5 - Advanced Technical Ceramics, Methods of Test for Ceramic Powders, Determination of Par
- EN-725-8 - Part 8: Determination of Tapped Bulk Density, Advanced Technical Ceramics - Methods Of
- EN-725-9 - Part 9: Determination of Untapped Bulk Density, Advanced Technical Ceramics - Methods
- EN-820-3 - Part 3: Determination of Resistance To Thermal Shock by Water Quenching, Advanced Tech
- EN-820-4 - Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4: Determination of flexural creep deformation at elevated temperatures
- EN-820-5 - Part 5: Determination of Elastic Moduli at Elevated Temperatures, Advanced Technical C
- EN-821-2 - Advanced Technical Ceramics, Monolithic Ceramics, THERMO-Physical Properties, Determin
- EN-843-1 - Part 1: Determination of Flexural Strength, Advanced Technical Ceramics - Mechanical P
- EN-843-2 - Part 2: Determination of Young's Modulus, Shear Modulus & Poisson's Ratio, Advanced Te
- EN-843-3 - Part 3: Determination of Subcritical Crack Growth Parameters From Constant Stressing R
- EN-843-4 - Part 4: Vickers, Knoop & Rockwell Superficial Hardness, Advanced Technical Ceramics, M
- EN-843-5 - Part 5: Statistical Analysis, Advanced Technical Ceramics - Mechanical Properties Of
- EN-843-6 - Advanced Technical Ceramics, Mechanical Properties of Monolithic Ceramics at Room Temp
- EN-843-7 - Part 7: C-Ring Tests, Advanced Technical Ceramics - Mechanical Properties of Monolithi
- EN-843-8 - Part 8: Guidelines for Conducting Proof Tests, Advanced Technical Ceramics - Mechanica
- EN-ISO-13383-1 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution
- EN-ISO-13383-2 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 2: Determination of phase volume fraction by evaluation of micrographs
- EN-ISO-14544 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of compression properties
- EN-ISO-14574 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties
- EN-ISO-14604 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for ceramic coatings - Determination of fracture strain
- EN-ISO-14629 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of flowability of ceramic powders
- EN-ISO-15732 - Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics), Test Method for Fractu
- EN-ISO-17140 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude
- EN-ISO-17142 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude
- EN-ISO-17161 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Determination of the degree of misalignment in uniaxial mechanical tests
- EN-ISO-18452 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer
- EN-ISO-18753 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer
- EN-ISO-18756 - Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics), Determination of Fract
- EN-ISO-18757 - Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Determination of Spec
- EN-ISO-20502 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing
- EN-ISO-20504 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature
- EN-ISO-23145-1 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density
- EN-ISO-23145-2 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density
- EN-ISO-23146 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edge V-notch beam (SEVNB) method
- EN-ISO-26423 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of coating thickness by crater-grinding method
- EN-ISO-26424 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test
- EN-ISO-26443 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings
- ISO-5803 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determination of monoclinic phase in zirconia
- JIS-R-1701-1 - Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for air purification performance of photocatalytic materials -- Part 1: Removal of nitric oxide
- SIS-CEN/TS-1007-7 - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
- SIS-CEN/TS-1071-8 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 8: Rockwell indentation test for evaluation of adhesion
- SIS-CEN/TS-1071-9 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 9: Determination of fracture strain
- SIS-CEN/TS-15365 - Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environmental - Determination of creep behaviour by the cold end method
- SIS-CEN/TS-15658 - Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method
- SS-EN-1006 - Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties
- SS-EN-1007-1 - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 1: Determination of size content
- SS-EN-1007-2 - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 2: Determination of linear density
- SS-EN-1007-3 - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area
- SS-EN-1007-4 - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 4: Determination of tensile properties of filaments at ambient temperature
- SS-EN-1007-5 - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature
- SS-EN-1007-6 - Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature
- SS-EN-1007-7 - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
- SS-EN-1071-1 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer
- SS-EN-1071-10 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning
- SS-EN-1071-12 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test
- SS-EN-1071-13 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method
- SS-EN-1071-2 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method
- SS-EN-1071-4 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA)
- SS-EN-1071-6 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test
- SS-EN-1071-9 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 9: Determination of fracture strain
- SS-EN-1159-1 - Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion
- SS-EN-1159-2 - Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity
- SS-EN-12289 - Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties
- SS-EN-12290 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties
- SS-EN-12291 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties
- SS-EN-12788 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength
- SS-EN-12789 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength
- SS-EN-13234 - Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Evaluation of the resistance to crack propagation by notch sensitivity testing
- SS-EN-13235 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of creep behaviour
- SS-EN-1389 - Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity
- SS-EN-14186 - Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique
- SS-EN-14232 - Advanced technical ceramics - Terms, definitions and abbreviations
- SS-EN-14425-3 - Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method
- SS-EN-15156 - Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude
- SS-EN-15157 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude
- SS-EN-15158 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude
- SS-EN-15335 - Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2 000 degrees Celsius
- SS-EN-15365 - Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method
- SS-EN-623-1 - Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 1: Determination of the presence of defects by dye penetration
- SS-EN-623-3 - Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the Linear Intercept Method)
- SS-EN-623-5 - Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 5: Determination of phase volume fraction by evaluation of micrographs
- SS-EN-658-2 - Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties
- SS-EN-658-3 - Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength
- SS-EN-658-4 - Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens
- SS-EN-658-5 - Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
- SS-EN-725-1 - Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina
- SS-EN-725-10 - Advanced technical ceramics - Methods of test for ceramic powders - Part 10: Determination of compaction properties
- SS-EN-725-12 - Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia
- SS-EN-725-2 - Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate
- SS-EN-725-3 - Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas
- SS-EN-725-4 - Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis
- SS-EN-725-5 - Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution
- SS-EN-725-8 - Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density
- SS-EN-725-9 - Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
- SS-EN-820-1 - Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 1: Determination of flexural strength at elevated temperatures
- SS-EN-820-3 - Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching
- SS-EN-820-4 - Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4: Determination of flexural creep deformation at elevated temperatures
- SS-EN-820-5 - Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
- SS-EN-843-1 - Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength
- SS-EN-843-2 - Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poission's ratio
- SS-EN-843-3 - Advanced technical ceramics - Monolithic ceramics, mechanical properties at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength test
- SS-EN-843-5 - Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis
- SS-EN-843-6 - Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 6: Guidance for fractographic investigation
- SS-EN-843-7 - Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests
- SS-EN-843-8 - Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests
- SS-EN-ISO-13383-1 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution (ISO 13383-1:2012)
- SS-EN-ISO-13383-2 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 2: Determination of phase volume fraction by evaluation of micrographs (ISO 13383-2:2012)
- SS-EN-ISO-14544 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of compression properties (ISO 14544:2013)
- SS-EN-ISO-14574 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties (ISO 14574:2013)
- SS-EN-ISO-14604 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for ceramic coatings - Determination of fracture strain (ISO 14604:2012)
- SS-EN-ISO-14629 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of flowability of ceramic powders (ISO 14629:2012)
- SS-EN-ISO-14705 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature (ISO 14705:2016)
- SS-EN-ISO-15732 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003)
- SS-EN-ISO-17092 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions (ISO 17092:2005)
- SS-EN-ISO-17140 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude (ISO 17140:2014)
- SS-EN-ISO-17142 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude (ISO 17142:2014)
- SS-EN-ISO-17161 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Determination of the degree of misalignment in uniaxial mechanical tests (ISO 17161:2014)
- SS-EN-ISO-17562 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique (ISO 17562:2016)
- SS-EN-ISO-17947 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of fine silicon nitride powders (ISO 17947:2014)
- SS-EN-ISO-18452 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer (ISO 18452:2005)
- SS-EN-ISO-18753 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer (ISO 18753:2017)
- SS-EN-ISO-18755 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thermal diffusivity of monolithic ceramics by flash method (ISO 18755:2022)
- SS-EN-ISO-18756 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method (ISO 18756:2003)
- SS-EN-ISO-18757 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003)
- SS-EN-ISO-19628 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity (ISO 19628:2017)
- SS-EN-ISO-19634 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Notations and symbols (ISO 19634:2017)
- SS-EN-ISO-20323 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of tensile properties of tubes (ISO 20323:2018)
- SS-EN-ISO-20501 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Weibull statistics for strength data (ISO 20501:2019)
- SS-EN-ISO-20502 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing (ISO 20502:2005 including Cor 1:2009)
- SS-EN-ISO-20504 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of compressive properties (ISO 20504:2022)
- SS-EN-ISO-20509 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of oxidation resistance of non-oxide monolithic ceramics (ISO 20509:2003)
- SS-EN-ISO-21813 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of high purity barium titanate powders (ISO 21813:2019)
- SS-EN-ISO-21814 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of aluminium nitride powders (ISO 21814:2019)
- SS-EN-ISO-21821 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of densification properties of ceramic powders on natural sintering (ISO 21821:2019)
- SS-EN-ISO-23145-1 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007)
- SS-EN-ISO-23145-2 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012)
- SS-EN-ISO-23146 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edge V-notch beam (SEVNB) method (ISO 23146:2012)
- SS-EN-ISO-23739 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of zirconium oxide powders (ISO 23739:2021)
- SS-EN-ISO-24370 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method (ISO 24370:2005)
- SS-EN-ISO-26423 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of coating thickness by crater-grinding method (ISO 26423:2009)
- SS-EN-ISO-26424 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test (ISO 26424:2008)
- SS-EN-ISO-26443 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2023)
- SS-EN-ISO-9630 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature (ISO 19630:2017)
- SS-ENV-1006 - Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties
- SS-ISO-10605 - Road vehicles Test methods for electrical disturbances from electrostatic discharge (ISO 10605:2023, IDT)