Document Center List of Standards on Binders. Sealing Materials Including Geomembranes, Asphalts For Buildings, Etc.
ICS Code 91.100.50
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1016 - Standard Test Method for Determination of Water Absorption of Sealant Backing
(Joint Filler) Material - ASTM-C1021 - Standard Practice for Laboratories Engaged in Testing of Building Sealants
- ASTM-C1059 - Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete
- ASTM-C1083 - Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
- ASTM-C1085 - Specification for Butyl Rubber Based Solvent-Release Sealants (Withdrawn 1997)
- ASTM-C1087 - Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
- ASTM-C1135 - Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
- ASTM-C1184 - Standard Specification for Structural Silicone Sealants
- ASTM-C1193 - Standard Guide for Use of Joint Sealants
- ASTM-C1246 - Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
- ASTM-C1247 - Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
- ASTM-C1248 - Standard Test Method for Staining of Porous Substrate by Joint Sealants
- ASTM-C1250 - Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes (Withdrawn 2015)
- ASTM-C1253 - Standard Test Method for Determining the Outgassing Potential of Sealant Backing
- ASTM-C1257 - Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
- ASTM-C1258 - Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
- ASTM-C1263 - Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
- ASTM-C1266 - Standard Test Method for Flow Characteristics of Preformed Tape Sealants
- ASTM-C1281 - Standard Specification for Preformed Tape Sealants for Glazing Applications
- ASTM-C1299 - Standard Guide for Use in Selection of Liquid-Applied Sealants (Withdrawn 2012)
- ASTM-C1305 - Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
- ASTM-C1306 - Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
- ASTM-C1311 - Standard Specification for Solvent Release Sealants
- ASTM-C1315 - Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
- ASTM-C1330 - Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
- ASTM-C1369 - Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
- ASTM-C1375 - Standard Guide for Substrates Used in Testing Building Seals and Sealants
- ASTM-C1382 - Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
- ASTM-C1392 - Standard Guide for Evaluating Failure of Structural Sealant Glazing
- ASTM-C1401 - Standard Guide for Structural Sealant Glazing
- ASTM-C1442 - Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
- ASTM-C1472 - Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
- ASTM-C1481 - Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
- ASTM-C1489 - Standard Specification for Lime Putty for Structural Purposes
- ASTM-C1536 - Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
- ASTM-C1589 - Standard Practice for Outdoor Weathering of Construction Seals and Sealants
- ASTM-C1620 - Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
- ASTM-C1642 - Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
- ASTM-C1643 - Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
- ASTM-C1735 - Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
- ASTM-C17353 - Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
- ASTM-C1736 - Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device (Withdrawn 2020)
- ASTM-C1737 - Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
- ASTM-C1756 - Standard Guide for Comparing Seal or Sealant Behavior to Reference Photographs
- ASTM-C1806 - Standard Test Method for Measuring the Flow Rate of Aerosol Foam Sealants
- ASTM-C1809 - Standard Practice for Preparation of Specimens and Reporting of Results for Permeance Testing of Pressure Sensitive Adhesive Sealed Joints in Insulation Vapor Retarders
- ASTM-C1850 - Standard Guide for Improved Laboratory Accelerated Tests to Predict the Weathering and for Use in Developing Protocols to Predict the Design Life of Building Sealant Systems
- ASTM-C1851 - Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus
- ASTM-C1852 - Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives
- ASTM-C510 - Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
- ASTM-C542 - Standard Specification for Lock-Strip Gaskets
- ASTM-C570 - Standard Specification for Oil- and Resin-Base Caulking Compound for Building Construction (Withdrawn 2002)
- ASTM-C603 - Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
- ASTM-C639 - Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
- ASTM-C661 - Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
- ASTM-C669 - Standard Specification for Glazing Compounds for Back Bedding and Face Glazing of Metal Sash (Withdrawn 2002)
- ASTM-C679 - Standard Test Method for Tack-Free Time of Elastomeric Sealants
- ASTM-C681 - Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
- ASTM-C711 - Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
- ASTM-C712 - Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
- ASTM-C713 - Standard Test Method for Slump of an Oil-Base Knife-Grade Channel Glazing Compound (Withdrawn 2002)
- ASTM-C716 - Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
- ASTM-C717 - Standard Terminology of Building Seals and Sealants
- ASTM-C718 - Standard Test Method for Ultraviolet (UV)-Cold Box Exposure of One-Part, Elastomeric, Solvent-Release Type Sealants (Withdrawn 2002)
- ASTM-C719 - Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
- ASTM-C731 - Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
- ASTM-C732 - Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
- ASTM-C733 - Standard Test Method for Volume Shrinkage of Latex Sealants (Withdrawn 2000)
- ASTM-C734 - Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
- ASTM-C736 - Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
- ASTM-C741 - Standard Test Method for Accelerated Aging of Wood Sash Face Glazing Compound (Withdrawn 2002)
- ASTM-C742 - Standard Test Method for Degree of Set for Wood Sash Glazing Compound (Withdrawn 2002)
- ASTM-C765 - Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
- ASTM-C771 - Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
- ASTM-C772 - Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
- ASTM-C782 - Standard Test Method for Softness of Preformed Tape Sealants
- ASTM-C790 - Guide for Use of Latex Sealants (Withdrawn 1992)
- ASTM-C792 - Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
- ASTM-C793 - Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
- ASTM-C794 - Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
- ASTM-C797 - Terminology for Use of Oil- and Resin-Based Putty and Glazing Compounds (Withdrawn 2002)
- ASTM-C834 - Standard Specification for Latex Sealants
- ASTM-C836 - Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
- ASTM-C864 - Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
- ASTM-C877 - Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
- ASTM-C879 - Standard Test Methods for Release Papers Used with Preformed Tape Sealants
- ASTM-C898 - Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate Wearing Course
- ASTM-C906 - Standard Test Method for T-Peel Strength of Hot Applied Sealants (Withdrawn 2006)
- ASTM-C907 - Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
- ASTM-C908 - Standard Test Method for Yield Strength of Preformed Tape Sealants
- ASTM-C910 - Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
- ASTM-C916 - Standard Specification for Adhesives for Duct Thermal Insulation
- ASTM-C919 - Standard Practice for Use of Sealants in Acoustical Applications
- ASTM-C920 - Standard Specification for Elastomeric Joint Sealants
- ASTM-C957 - Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
- ASTM-C961 - Standard Test Method for Lap Shear Strength of Sealants
- ASTM-C962 - Guide for Use of Elastomeric Joint Sealants (Withdrawn 1992)
- ASTM-C972 - Standard Test Method for Compression-Recovery of Tape Sealant
- ASTM-C981 - Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
- ASTM-D1075 - Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures (Withdrawn 2019)
- ASTM-D1079 - Standard Terminology Relating to Roofing and Waterproofing
- ASTM-D113 - Standard Test Method for Ductility of Asphalt Materials
- ASTM-D1188 - Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
- ASTM-D1227 - Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing
- ASTM-D1327 - Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
- ASTM-D1369 - Standard Practice for Quantities of Materials for Asphalt-Aggregate Surface Treatments
- ASTM-D1370 - Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
- ASTM-D139 - Standard Test Method for Float Test for Bituminous Materials
- ASTM-D140 - Standard Practice for Sampling Asphalt Materials
- ASTM-D146 - Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
- ASTM-D1461 - Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures
- ASTM-D1559 - Test Method for Resistance of Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (Withdrawn 1998)
- ASTM-D1560 - Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus
- ASTM-D1665 - Standard Test Method for Engler Specific Viscosity of Tar Products (Withdrawn 2023)
- ASTM-D1669 - Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings
- ASTM-D1670 - Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
- ASTM-D173 - Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
- ASTM-D1754 - Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
- ASTM-D1856 - Standard Test Method for Recovery of Asphalt from Solution by Abson Method
- ASTM-D1863 - Standard Specification for Mineral Aggregate Used on Built-Up Roofs
- ASTM-D2026 - Standard Specification for Cutback Asphalt (Slow-Curing Type)
- ASTM-D2027 - Standard Specification for Cutback Asphalt (Medium-Curing Type)
- ASTM-D2028 - Standard Specification for Cutback Asphalt (Rapid-Curing Type)
- ASTM-D2041 - Standard Test Method for Theoretical Maximum Specific Gravity and Density of Asphalt Mixtures
- ASTM-D2042 - Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene or Toluene
- ASTM-D2170 - Standard Test Method for Kinematic Viscosity of Asphalts
- ASTM-D2171 - Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
- ASTM-D2172 - Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures
- ASTM-D2178 - Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
- ASTM-D2202 - Standard Test Method for Slump of Sealants
- ASTM-D2203 - Standard Test Method for Staining from Sealants
- ASTM-D224 - Standard Specification for Smooth-Surfaced Asphalt Roll Roofing (Organic Felt) (Withdrawn 2002)
- ASTM-D2249 - Standard Test Method for Predicting the Effect of Weathering on Face Glazing and Bedding Compounds on Metal Sash (Withdrawn 2002)
- ASTM-D225 - Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules (Withdrawn 2012)
- ASTM-D226 - Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
- ASTM-D227 - Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
- ASTM-D2376 - Standard Test Method for Slump of Face Glazing and Bedding Compounds on Metal Sash (Withdrawn 2002)
- ASTM-D2377 - Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
- ASTM-D2397 - Standard Specification for Cationic Emulsified Asphalt
- ASTM-D2398 - Test Method for Softening Point of Bitumen in Ethylene Glycol (Ring-and-Ball) (Withdrawn 1984)
- ASTM-D2399 - Standard Practice for Selection of Cutback Asphalts
- ASTM-D2416 - Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)
- ASTM-D244 - Standard Test Methods and Practices for Emulsified Asphalts
- ASTM-D2450 - Standard Test Method for Bond of Oil- and Resin-Base Caulking Compounds (Withdrawn 2002)
- ASTM-D2451 - Standard Test Method for Degree of Set for Glazing Compounds on Metal Sash (Withdrawn 2002)
- ASTM-D2452 - Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
- ASTM-D2453 - Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
- ASTM-D2489 - Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures
- ASTM-D249 - Standard Specification for Asphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules (Withdrawn 2002)
- ASTM-D2493 - Standard Practice for Viscosity-Temperature Chart for Asphalt Binders
- ASTM-D2521 - Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining
- ASTM-D255 - Standard Method for Steam Distillation of Bituminous Protective Coatings (Withdrawn 2000)
- ASTM-D2569 - Standard Test Method for Distillation of Pitch (Withdrawn 2006)
- ASTM-D2626 - Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
- ASTM-D2643 - Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
- ASTM-D2726 - Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
- ASTM-D2728 - Standard Practice for Paving Uses and Application Temperatures for Road Tars (Withdrawn 2023)
- ASTM-D2746 - Standard Test Method for Staining Tendency of Asphalt (Stain Index)
- ASTM-D2764 - Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
- ASTM-D2823 - Standard Specification for Asphalt Roof Coatings, Asbestos Containing (Withdrawn 2014)
- ASTM-D2824 - Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos
- ASTM-D2829 - Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems
- ASTM-D2872 - Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
- ASTM-D2939 - Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012)
- ASTM-D2962 - Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches
- ASTM-D3019 - Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, and Fibered
- ASTM-D3105 - Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
- ASTM-D312 - Standard Specification for Asphalt Used in Roofing
- ASTM-D3141 - Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
- ASTM-D3142 - Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
- ASTM-D3143 - Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
- ASTM-D3161 - Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)
- ASTM-D3202 - Standard Practice for Preparation of Bituminous Mixture Beam Specimens by Means of the California Kneading Compactor (Withdrawn 2007)
- ASTM-D3205 - Standard Test Method for Viscosity of Asphalt with Cone and Plate Viscometer (Withdrawn 2000)
- ASTM-D3279 - Standard Test Method for
n -Heptane Insolubles - ASTM-D3289 - Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
- ASTM-D3320 - Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type)
- ASTM-D3378 - Specification for Asphalt-Saturated and Coated Asbestos Felt Base Sheet Used in Roofing (Withdrawn 1985)
- ASTM-D3387 - Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM) (Withdrawn 2020)
- ASTM-D3406 - Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements (Withdrawn 2013)
- ASTM-D3423 - Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)
- ASTM-D3461 - Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)
- ASTM-D3462 - Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
- ASTM-D3468 - Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
- ASTM-D3496 - Standard Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing (Withdrawn 2010)
- ASTM-D3497 - Standard Test Method for Dynamic Modulus of Asphalt Mixtures (Withdrawn 2009)
- ASTM-D3515 - Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures (Withdrawn 2009)
- ASTM-D3549 - Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
- ASTM-D3569 - Standard Specification for Joint Sealant, Hot-Applied, Elastomeric, Jet-Fuel-Resistant-Type for Portland Cement Concrete Pavements (Withdrawn 2006)
- ASTM-D3581 - Standard Specification for Joint Sealant, Hot-Applied, Jet-Fuel-Resistant Type, for Portland Cement Concrete and Tar-Concrete Pavements (Withdrawn 2006)
- ASTM-D3583 - Methods of Testing Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements, or Joint Sealant, Hot-Applied, Elastomeric, Jet-Fuel Resistant Type, for Portland Cement, Concrete Pavement (Withdrawn 1995)
- ASTM-D36 - Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- ASTM-D3617 - Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application
- ASTM-D3625 - Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
- ASTM-D3628 - Standard Practice for Selection and Use of Emulsified Asphalts
- ASTM-D371 - Standard Specification for Asphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules; Wide Selvage (Withdrawn 2002)
- ASTM-D3746 - Standard Test Method for Impact Resistance of Bituminous Roofing Systems
- ASTM-D3791 - Standard Practice for Evaluating the Effects of Heat on Asphalts
- ASTM-D3805 - Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings
- ASTM-D3909 - Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules
- ASTM-D4 - Standard Test Method for Bitumen Content
- ASTM-D4013 - Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor (Withdrawn 2013)
- ASTM-D402 - Standard Test Method for Distillation of Cutback Asphalt (Withdrawn 2023)
- ASTM-D4068 - Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
- ASTM-D4073 - Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes
- ASTM-D4074 - Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples
- ASTM-D4123 - Standard Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures (Withdrawn 2003)
- ASTM-D4124 - Standard Test Method for Separation of Asphalt into Four Fractions
- ASTM-D4215 - Standard Specification for Cold-Mixed, Cold-Laid Asphalt Paving Mixtures
- ASTM-D4296 - Standard Practice for Sampling Pitch
- ASTM-D43 - Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing
- ASTM-D4311 - Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
- ASTM-D4312 - Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
- ASTM-D4379 - Test Method for Emulsified Asphalt/Job Aggregate Cold Mix Test (Withdrawn 1986)
- ASTM-D4402 - Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
- ASTM-D4434 - Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
- ASTM-D4437 - Standard Practice for Nondestructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes
- ASTM-D4479 - Standard Specification for Asphalt Roof Coatings—Asbestos-Free
- ASTM-D449 - Standard Specification for Asphalt Used in Dampproofing and Waterproofing
- ASTM-D450 - Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing
- ASTM-D4586 - Standard Specification for Asphalt Roof Cement, Asbestos-Free
- ASTM-D4601 - Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
- ASTM-D4616 - Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
- ASTM-D4637 - Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
- ASTM-D4746 - Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
- ASTM-D4798 - Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
- ASTM-D4799 - Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
- ASTM-D4811 - Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
- ASTM-D4830 - Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing
- ASTM-D4887 - Standard Practice for Preparation of Viscosity Blends for Hot Recycled Asphalt Materials
- ASTM-D4897 - Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
- ASTM-D4932 - Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles
- ASTM-D4957 - Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer
- ASTM-D4977 - Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
- ASTM-D4989 - Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
- ASTM-D4990 - Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing
- ASTM-D5 - Standard Test Method for Penetration of Bituminous Materials
- ASTM-D5019 - Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane (Withdrawn 2011)
- ASTM-D5036 - Standard Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing (Withdrawn 2012)
- ASTM-D5076 - Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes
- ASTM-D5084 - Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
- ASTM-D5100 - Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen
- ASTM-D5147 - Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM-D5167 - Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
- ASTM-D517 - Standard Specification for Asphalt Plank
- ASTM-D5249 - Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
- ASTM-D529 - Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials (Withdrawn 2013)
- ASTM-D5385 - Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
- ASTM-D5404 - Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
- ASTM-D5405 - Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
- ASTM-D545 - Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
- ASTM-D5469 - Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems
- ASTM-D5546 - Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge (Withdrawn 2017)
- ASTM-D5601 - Standard Test Method for Tearing Resistance of Roofing and Waterproofing Materials and Membranes
- ASTM-D5602 - Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
- ASTM-D5624 - Standard Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications (Withdrawn 2022)
- ASTM-D5635 - Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
- ASTM-D5636 - Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials
- ASTM-D5643 - Standard Specification for Coal Tar Roof Cement, Asbestos Free
- ASTM-D5665 - Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing
- ASTM-D5710 - Standard Specification for Trinidad Lake Modified Asphalt
- ASTM-D5726 - Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing
- ASTM-D5801 - Standard Test Method for Toughness and Tenacity of Asphalt Materials
- ASTM-D5869 - Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
- ASTM-D5957 - Standard Guide for Flood Testing Horizontal Waterproofing Installations
- ASTM-D6 - Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds
- ASTM-D6083 - Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
- ASTM-D6141 - Standard Guide for Screening Clay Portion and Index Flux of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids
- ASTM-D6152 - Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing
- ASTM-D6162 - Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
- ASTM-D6163 - Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
- ASTM-D6164 - Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
- ASTM-D6221 - Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing
- ASTM-D6222 - Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
- ASTM-D6223 - Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
- ASTM-D6298 - Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
- ASTM-D6356 - Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing
- ASTM-D6369 - Standard Guide for Design of Standard Flashing Details for EPDM Roof Membranes (Withdrawn 2015)
- ASTM-D6380 - Standard Specification for Asphalt Roll Roofing (Organic Felt)
- ASTM-D6381 - Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance
- ASTM-D6390 - Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
- ASTM-D6392 - Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods
- ASTM-D6434 - Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes
- ASTM-D6455 - Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs)
- ASTM-D6495 - Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners
- ASTM-D6496 - Standard Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
- ASTM-D6510 - Standard Guide for Selection of Asphalt Used in Built-Up Roofing Systems (Withdrawn 2015)
- ASTM-D6511 - Standard Test Methods for Solvent Bearing Bituminous Compounds
- ASTM-D6521 - Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
- ASTM-D6622 - Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems
- ASTM-D6630 - Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance
- ASTM-D6636 - Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
- ASTM-D6638 - Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
- ASTM-D6648 - Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- ASTM-D6723 - Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) (Withdrawn 2011)
- ASTM-D6848 - Standard Specification for Aluminum Pigmented Emulsified Asphalt Used as a Protective Coating for Roofing (Withdrawn 2011)
- ASTM-D6857 - Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
- ASTM-D70 - Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
- ASTM-D7051 - Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface
- ASTM-D71 - Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
- ASTM-D7116 - Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements
- ASTM-D7227 - Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus
- ASTM-D727 - Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method
- ASTM-D7281 - Standard Test Method for Determining Water Migration Resistance Through Roof Membranes
- ASTM-D7311 - Standard Specification for Liquid-Applied, Single-Pack, Moisture-Triggered, Aliphatic Polyurethane Roofing Membrane (Withdrawn 2013)
- ASTM-D7349 - Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners
- ASTM-D7379 - Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive
- ASTM-D7402 - Standard Practice for Identifying Cationic Emulsified Asphalts
- ASTM-D7403 - Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation
- ASTM-D7405 - Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM-D7425 - Standard Specification for Spray Polyurethane Foam Used for Roofing Applications
- ASTM-D7460 - Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending (Withdrawn 2019)
- ASTM-D7492 - Standard Guide for Use of Drainage System Media with Waterproofing Systems
- ASTM-D7496 - Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
- ASTM-D7505 - Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
- ASTM-D7530 - Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
- ASTM-D7552 - Standard Test Method for Determining the Complex Shear Modulus (G*) of Asphalt Mixtures Using Dynamic Shear Rheometer
- ASTM-D7553 - Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
- ASTM-D7586 - Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies (Withdrawn 2020)
- ASTM-D7636 - Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems
- ASTM-D7643 - Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
- ASTM-D7654 - Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
- ASTM-D7693 - Standard Guide for Application of Heat Weldable Modified Bituminous Waterproofing Membranes Systems for New Concrete Decks
- ASTM-D7703 - Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance Method
- ASTM-D7906 - Standard Practice for Recovery of Asphalt Binder from Solution Using Toluene and the Rotary Evaporator
- ASTM-D7944 - Standard Practice for Recovery of Emulsified Asphalt Residue Using a Vacuum Oven
- ASTM-D8012 - Standard Practice for Reclamation of Scrap and Waste Asphalt Shingles to Produce Reclaimed Asphalt Shingles (RAS) for Use in Transportation Applications
- ASTM-D8013 - Standard Guide for Establishing a Recycle Program for Roof Coverings Roofing Membrane and Shingle Materials
- ASTM-D8051 - Standard Specification for Wax-Modified Asphalt Used in Roofing
- ASTM-D8052 - Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
- ASTM-D8125 - Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)
- ASTM-D8138 - Standard Specification for Preformed Silicone Joint Sealing System for Bridges
- ASTM-D8140 - Standard Guide for the Use of Foundry Sand in Asphalt Mixtures
- ASTM-D8154 - Standard Test Methods for 1H-NMR Determination of Ketone-Ethylene-Ester and Polyvinyl Chloride Contents in KEE-PVC Roofing Fabrics
- ASTM-D8188 - Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
- ASTM-D977 - Standard Specification for Emulsified Asphalt
- ASTM-E102 - Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
- ASTM-E1068 - Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid (Withdrawn 2018)
- ASTM-E1069 - Standard Test Method for Testing Polymeric Seal Materials for Geothermal and/or High Temperature Service Under Sealing Stress (Withdrawn 2018)
- ASTM-E1612 - Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
- ASTM-E1745 - Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
- ASTM-E1783 - Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
- ASTM-E1993 - Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
- ASTM-E2690 - Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
- ASTM-E605 - Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
- ASTM-E907 - Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems (Withdrawn 2013)
- ASTM-E936 - Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing (Withdrawn 2012)
- ASTM-F1277 - Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique (Withdrawn 2018)
- ASTM-F1306 - Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
- ASTM-F434 - Standard Test Method for Blow-Out Testing of Preformed Gaskets
- ASTM-PS36 - Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) (Withdrawn 1997)
BSI:
- BS-2000-397 - Methods of test for petroleum and its products
- BS-2000-47 - Methods of test for petroleum and its products. Solubility of bituminous binders
- BS-3195-3 - Methods for sampling petroleum products. Method for sampling bituminous binders
- BS-3690-3 - Bitumens for building and civil engineering
- BS-3712-1 - Building and construction sealants
- BS-3712-2 - Building and construction sealants
- BS-3712-3 - Building and construction sealants
- BS-3712-4 - Building and construction sealants
- BS-4016 - Specification for flexible building membranes (breather type)
- BS-4049 - Glossary of terms applicable to internal plastering, external rendering and floor screeding
- BS-5212-1 - Cold applied joint sealant systems for concrete pavements. Specification for joint sealants
- BS-5212-2 - Cold applied joint sealant systems for concrete pavements. Code of practice for the application and use of joint sealants
- BS-5212-3 - Cold applied joint sealant systems for concrete pavements. Methods of test
- BS-544 - Specification for linseed oil putty for use in wooden frames
- BS-6100-6.1 - Glossary of building and civil engineering terms. Concrete and plaster. Binders
- BS-6213 - Selection of construction sealants. Guide
- BS-743 - Specification for materials for damp-proof courses
- BS-8449 - Building and construction sealants with movement accommodation factors greater than 25%. Method of test for determination of adhesion/cohesion properties at variable temperatures
- BS-8616 - Specification for performance parameters and test methods for green roof substrates
- BS-9228 - Recycling of roads and other paved areas using bitumen emulsion, foamed bitumen or hydraulic material. Materials, production, installation and product type testing. Specification
- BS-EN-1107-1 - Flexible sheets for waterproofing. Determination of dimensional stability
- BS-EN-1107-2 - Flexible sheets for waterproofing. Determination of dimensional stability
- BS-EN-1108 - Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of form stability under cyclical temperature changes
- BS-EN-1109 - Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flexibility at low temperature
- BS-EN-1110 - Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flow resistance at elevated temperature
- BS-EN-12039 - Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of adhesion of granules
- BS-EN-12310-1 - Flexible sheets for waterproofing. Determination of resistance to tearing (nail shank)
- BS-EN-12310-2 - Flexible sheets for waterproofing. Determination of resistance to tearing
- BS-EN-12310-2-TC - Tracked Changes. Flexible sheets for waterproofing. Determination of resistance to tearing
- BS-EN-12311-1 - Flexible sheets for waterproofing. Determination of tensile properties
- BS-EN-12311-2 - Flexible sheets for waterproofing. Determination of tensile properties
- BS-EN-12316-1 - Flexible sheets for waterproofing. Determination of peel resistance of joints
- BS-EN-12316-2 - Flexible sheets for waterproofing. Determination of peel resistance of joints
- BS-EN-12317-1 - Flexible sheets for waterproofing
- BS-EN-12317-2 - Flexible sheets for waterproofing. Determination of shear resistance of joints
- BS-EN-12591 - Bitumen and bituminous binders. Specifications for paving grade bitumens
- BS-EN-12592 - Bitumen and bituminous binders. Determination of solubility
- BS-EN-12593 - Bitumen and bituminous binders. Determination of the Fraass breaking point
- BS-EN-12593-TC - Tracked Changes. Bitumen and bituminous binders. Determination of the Fraass breaking point
- BS-EN-12594 - Bitumen and bituminous binders. Preparation of test samples
- BS-EN-12595 - Bitumen and bituminous binders. Determination of kinematic viscosity
- BS-EN-12595-TC - Tracked Changes. Bitumen and bituminous binders. Determination of kinematic viscosity
- BS-EN-12596 - Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary
- BS-EN-12596-TC - Tracked Changes. Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary
- BS-EN-12597 - Bitumen and bituminous binders. Terminology
- BS-EN-12606-1 - Bitumen and bituminous binders. Determination of the paraffin wax content
- BS-EN-12606-1-TC - Tracked Changes. Bitumen and bituminous binders. Determination of the paraffin wax content
- BS-EN-12606-2 - Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content
- BS-EN-12607-1 - Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air
- BS-EN-12607-2 - Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air
- BS-EN-12607-3 - Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air
- BS-EN-12691 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact
- BS-EN-12691-TC - Tracked Changes. Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact
- BS-EN-12697-13 - Bituminous mixtures. Test methods
- BS-EN-12697-13-TC - Tracked Changes. Bituminous mixtures. Test methods
- BS-EN-12697-14 - Bituminous mixtures. Test methods
- BS-EN-12697-15 - Bituminous mixtures. Test methods
- BS-EN-12697-27 - Bituminous mixtures. Test methods
- BS-EN-12697-28 - Bituminous mixtures. Test methods
- BS-EN-12697-29 - Bituminous mixtures. Test methods
- BS-EN-12697-32 - Bituminous mixtures. Test methods
- BS-EN-12697-36 - Bituminous mixtures. Test methods
- BS-EN-12697-36-TC - Tracked Changes. Bituminous mixtures. Test methods
- BS-EN-12697-37-TC - Tracked Changes. Bituminous mixtures. Test methods
- BS-EN-12730 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to static loading
- BS-EN-12846 - Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of efflux time of bitumen emulsions by the efflux viscometer method
- BS-EN-12846-1 - Bitumen and bituminous binders. Determination of efflux time by the efflux viscometer
- BS-EN-12846-1-TC - Tracked Changes. Bitumen and bituminous binders. Determination of efflux time by the efflux viscometer
- BS-EN-12846-2 - Bitumen and bituminous binders. Determination of efflux time by the efflux viscometer
- BS-EN-12847 - Bitumen and bituminous binders. Determination of settling tendency of bituminous emulsions
- BS-EN-12847-TC - Tracked Changes. Bitumen and bituminous binders. Determination of settling tendency of bituminous emulsions
- BS-EN-12848 - Bitumen and bituminous binders. Determination of mixing stability with cement of bituminous emulsions
- BS-EN-12849 - Bitumen and bituminous binders. Determination of penetration power of bituminous emulsions
- BS-EN-12850 - Bitumen and bituminous binders. Determination of the pH value of bituminous emulsions
- BS-EN-12850-TC - Tracked Changes. Bitumen and bituminous binders. Determination of the pH value of bituminous emulsions
- BS-EN-1296 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roofing. Method of artificial ageing by long term exposure to elevated temperature
- BS-EN-1297 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water
- BS-EN-12970 - Mastic asphalt for waterproofing. Definitions, requirements and test methods
- BS-EN-13074 - Methods of test for petroleum and its products. Petroleum products. Bitumen and bituminous binders. Recovery of binder from bitumen emulsions by evaporation
- BS-EN-13074-1 - Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders
- BS-EN-13074-2 - Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders
- BS-EN-13075-1 - Bitumen and bituminous binders. Determination of breaking behaviour
- BS-EN-13075-1-TC - Tracked Changes. Bitumen and bituminous binders. Determination of breaking behaviour
- BS-EN-13075-2 - Bitumen and bituminous binders. Determination of breaking behaviour
- BS-EN-13075-2-TC - Tracked Changes. Bitumen and bituminous binders. Determination of breaking behaviour
- BS-EN-13111 - Flexible sheets for waterproofing. Underlays for discontinuous roofing and walls. Determination of resistance to water penetration
- BS-EN-13301 - Bitumen and bituminous binders. Determination of staining tendency of bitumen
- BS-EN-13302 - Bitumen and bituminous binders. Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
- BS-EN-13302-TC - Tracked Changes. Bitumen and bituminous binders. Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
- BS-EN-13303 - Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumen
- BS-EN-13303-TC - Tracked Changes. Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumen
- BS-EN-13304 - Bitumen and bituminous binders. Framework for specification of oxidised bitumen
- BS-EN-13305 - Bitumen and bituminous binders. Framework for specification of hard industrial bitumens
- BS-EN-13357 - Methods of test for petroleum and its products. BS 2000-502. Bitumen and bituminous binders. Determination of the efflux time of petroleum cut-back and fluxed bitumens
- BS-EN-13358 - Bitumen and bituminous binders. Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes
- BS-EN-13361 - Geosynthetic barriers. Characteristics required for use in the construction of reservoirs and dams
- BS-EN-13362 - Geosynthetic Barriers. Characteristics required for use in the construction of canals
- BS-EN-13362-TC - Tracked Changes. Geosynthetic Barriers. Characteristics required for use in the construction of canals
- BS-EN-13375 - Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Specimen preparation
- BS-EN-13398 - Bitumen and bituminous binders. Determination of the elastic recovery of modified bitumen
- BS-EN-13398-TC - Tracked Changes. Bitumen and bituminous binders. Determination of the elastic recovery of modified bitumen
- BS-EN-13399 - Bitumen and bituminous binders. Determination of storage stability of modified bitumen
- BS-EN-13399-TC - Tracked Changes. Bitumen and bituminous binders. Determination of storage stability of modified bitumen
- BS-EN-13416 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Rules for sampling
- BS-EN-13416-TC - Tracked Changes. Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Rules for sampling
- BS-EN-13454-1 - Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate
- BS-EN-13454-2 - Binders for floor screeds based on calcium sulphate
- BS-EN-13491 - Geosynthetic barriers. Characteristics required for use in the construction of tunnels and associated underground structures
- BS-EN-13492 - Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
- BS-EN-13492-TC - Tracked Changes. Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
- BS-EN-13493 - Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites
- BS-EN-13493-TC - Tracked Changes. Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites
- BS-EN-13583 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of hail resistance
- BS-EN-13587 - Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method
- BS-EN-13588 - Bitumen and bituminous binders. Determination of cohesion of bituminous binders with pendulum test
- BS-EN-13588-TC - Tracked Changes. Bitumen and bituminous binders. Determination of cohesion of bituminous binders with pendulum test
- BS-EN-13589 - Bitumen and bituminous binders. Determination of the tensile properties of modified bitumen by the force ductility method
- BS-EN-13596 - Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of bond strength
- BS-EN-13614 - Bitumen and bituminous binders. Determination of adhesivity of bituminous emulsions by water immersion test
- BS-EN-13614-TC - Tracked Changes. Bitumen and bituminous binders. Determination of adhesivity of bituminous emulsions by water immersion test
- BS-EN-13632 - Bitumen and bituminous binders. Visualisation of polymer dispersion in polymer modified bitumen
- BS-EN-13653 - Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of shear strength
- BS-EN-13702 - Bitumen and bituminous binders. Determination of dynamic viscosity of bitumen and bituminous binders by the cone and plate method
- BS-EN-13702-1 - Methods of test for petroleum and its products. BS 2000-513. Bitumen and bituminous binders. Determination of dynamic viscosity of modified bitumen
- BS-EN-13702-2 - Methods of test for petroleum and its products. BS 2000-514. Bitumen and bituminous binders. Determination of dynamic viscosity of modified bitumen
- BS-EN-13702-TC - Tracked Changes. Bitumen and bituminous binders. Determination of dynamic viscosity of bitumen and bituminous binders by the cone and plate method
- BS-EN-13703 - Methods of test for petroleum and its products. BS 2000-515. Bitumen and bituminous binders. Determination of deformation energy
- BS-EN-13707 - Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics
- BS-EN-13719 - Geosynthetics. Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers
- BS-EN-13719-TC - Tracked Changes. Geosynthetics. Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers
- BS-EN-13733 - Products and systems for the protection and repair of concrete structures. Test methods. Determination of the durability of structural bonding agents
- BS-EN-13738 - Geotextiles and geotextile-related products. Determination of pullout resistance in soil
- BS-EN-13808 - Bitumen and bituminous binders. Framework for specifying cationic bituminous emulsions
- BS-EN-13859-1 - Flexible sheets for waterproofing. Definitions and characteristics of underlays
- BS-EN-13859-2 - Flexible sheets for waterproofing. Definitions and characteristics of underlays
- BS-EN-13897 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of watertightness after stretching at low temperatures
- BS-EN-13924-2 - Bitumen and bituminous binders. Specification framework for special paving grade bitumen
- BS-EN-13948 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to root penetration
- BS-EN-13956 - Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Definitions and characteristics
- BS-EN-13967 - Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet. Definitions and characteristics
- BS-EN-13969 - Flexible sheets for waterproofing. Bitumen damp proof sheets including bitumen basement tanking sheets. Definitions and characteristics
- BS-EN-13970 - Flexible sheets for waterproofing. Bitumen water vapour control layers. Definitions and characteristics
- BS-EN-13984 - Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics
- BS-EN-14151 - Geosynthetics. Determination of burst strength
- BS-EN-14187-2 - Cold applied joint sealants. Test methods
- BS-EN-14187-2-TC - Tracked Changes. Cold applied joint sealants. Test methods
- BS-EN-14187-4 - Cold applied joint sealants. Test methods
- BS-EN-14187-4-TC - Tracked Changes. Cold applied joint sealants. Test methods
- BS-EN-14187-6 - Cold applied joint sealants. Test method
- BS-EN-14187-6-TC - Tracked Changes. Cold applied joint sealants. Test method
- BS-EN-14187-7 - Cold applied joint sealants. Test methods
- BS-EN-14187-8 - Cold applied joint sealants. Test methods
- BS-EN-14187-8-TC - Tracked Changes. Cold applied joint sealants. Test methods
- BS-EN-14188-3 - Joint fillers and sealants
- BS-EN-14196 - Geosynthetics. Test methods for measuring mass per unit area of clay geosynthetic barriers
- BS-EN-14196-TC - Tracked Changes. Geosynthetics. Test methods for measuring mass per unit area of clay geosynthetic barriers
- BS-EN-14223 - Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of water absorption
- BS-EN-14223-TC - Tracked Changes. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of water absorption
- BS-EN-14224 - Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of crack bridging ability
- BS-EN-1425 - Bitumen and bituminous binders. Characterization of perceptible properties
- BS-EN-1426 - Bitumen and bituminous binders. Determination of needle penetration
- BS-EN-1427 - Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method
- BS-EN-1428 - Bitumen and bituminous binders. Determination of water content in bituminous emulsions. Azeotropic distillation method
- BS-EN-1429 - Bitumen and bituminous binders. Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving
- BS-EN-1430 - Bitumen and bituminous binders. Determination of particle polarity of bituminous emulsions
- BS-EN-1431 - Bitumen and bituminous binders. Determination of residual binder and oil distillate from bitumen emulsions by distillation
- BS-EN-1431-TC - Tracked Changes. Bitumen and bituminous binders. Determination of residual binder and oil distillate from bitumen emulsions by distillation
- BS-EN-14575 - Geosynthetic barriers. Screening test method for determining the resistance to oxidation
- BS-EN-14691 - Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Compatibility by heat conditioning
- BS-EN-14691-TC - Tracked Changes. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Compatibility by heat conditioning
- BS-EN-14692 - Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the resistance to compaction of an asphalt layer
- BS-EN-14692-TC - Tracked Changes. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the resistance to compaction of an asphalt layer
- BS-EN-14693 - Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the behaviour of bitumen sheets during application of mastic asphalt
- BS-EN-14693-TC - Tracked Changes. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the behaviour of bitumen sheets during application of mastic asphalt
- BS-EN-14694 - Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of resistance to dynamic water pressure after damage by pre-treatment
- BS-EN-14694-TC - Tracked Changes. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of resistance to dynamic water pressure after damage by pre-treatment
- BS-EN-14695 - Flexible sheets for waterproofing. Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete. Definitions and characteristics
- BS-EN-14733 - Bitumen and bituminous binders. Bituminous emulsions, fluxed and cut-back bitumen factory production control
- BS-EN-14769 - Bitumen and bituminous binders. Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
- BS-EN-14769-TC - Tracked Changes. Bitumen and bituminous binders. Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
- BS-EN-14770 - Bitumen and bituminous binders. Determination of complex shear modulus and phase angle. Dynamic Shear Rheometer (DSR)
- BS-EN-14770-TC - Tracked Changes. Bitumen and bituminous binders. Determination of complex shear modulus and phase angle. Dynamic Shear Rheometer (DSR)
- BS-EN-14771 - Bitumen and bituminous binders. Determination of the flexural creep stiffness. Bending Beam Rheometer (BBR)
- BS-EN-14771-TC - Tracked Changes. Bitumen and bituminous binders. Determination of the flexural creep stiffness. Bending Beam Rheometer (BBR)
- BS-EN-14891 - Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment and verification of constancy of performance, classification and marking
- BS-EN-14891-TC - Tracked Changes. Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment and verification of constancy of performance, classification and marking
- BS-EN-14895 - Bitumen and bituminous binders. Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders
- BS-EN-14896 - Bitumen and bituminous binders. Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders. Rotating spindle viscometer method
- BS-EN-14909 - Flexible sheets for waterproofing. Plastic and rubber damp proof courses. Definitions and characteristics
- BS-EN-14967 - Flexible sheets for waterproofing. Bitumen damp proof courses. Definitions and characteristics
- BS-EN-15322 - Bitumen and bituminous binders. Framework for specifying cut-back and fluxed bituminous binders
- BS-EN-15323 - Bitumen and bituminous binders. Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT)
- BS-EN-15326 - Bitumen and bituminous binders. Measurement of density and specific gravity. Capillary-stoppered pyknometer method
- BS-EN-15368 - Hydraulic binder for non-structural applications Definition, specifications and conformity criteria
- BS-EN-15434-1 - Bonding sealants
- BS-EN-15434-1-TC - Tracked Changes. Bonding sealants
- BS-EN-1548 - Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Method for exposure to bitumen
- BS-EN-15651-1 - Sealants for non-structural use in joints in buildings and pedestrian walkways
- BS-EN-15651-2 - Sealants for non-structural use in joints in buildings and pedestrian walkways
- BS-EN-15651-3 - Sealants for non-structural use in joints in buildings and pedestrian walkways
- BS-EN-15651-4 - Sealants for non-structural use in joints in buildings and pedestrian walkways
- BS-EN-15651-5 - Sealants for non-structural use in joints in buildings and pedestrian walkways
- BS-EN-15651-5-TC - Tracked Changes. Sealants for non-structural use in joints in buildings and pedestrian walkways
- BS-EN-15812 - Polymer modified bituminous thick coatings for waterproofing. Determination of crack bridging ability
- BS-EN-15813 - Polymer modified bituminous thick coatings for waterproofing. Determination of flexibility at low temperatures
- BS-EN-15814 - Polymer modified bituminous thick coatings for waterproofing. Definitions and requirements
- BS-EN-15815 - Polymer modified bituminous thick coatings for waterproofing. Resistance to compression
- BS-EN-15816 - Polymer modified bituminous thick coatings for waterproofing. Resistance to rain
- BS-EN-15817 - Polymer modified bituminous thick coatings for waterproofing. Water resistance
- BS-EN-15818 - Polymer modified bituminous thick coatings for waterproofing. Determination of dimensional stability at high temperature
- BS-EN-15819 - Polymer modified bituminous thick coatings for waterproofing. Reduction of the thickness of the layer when fully dried
- BS-EN-16002 - Flexible sheets for waterproofing. Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing
- BS-EN-16002-TC - Tracked Changes. Flexible sheets for waterproofing. Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing
- BS-EN-16345 - Bitumen and bituminous binders. Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer
- BS-EN-16346-TC - Tracked Changes. Bitumen and bituminous binders. Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions
- BS-EN-16416 - Geosynthetic clay barriers. Determination of water flux index. Flexible wall permeameter method at constant head
- BS-EN-16659 - Bitumen and Bituminous Binders. Multiple Stress Creep and Recovery Test (MSCRT)
- BS-EN-16849 - Bitumen and bituminous binders. Determination of water content in bituminous emulsions. Method using a drying balance
- BS-EN-16993 - Geosynthetic barriers. Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids
- BS-EN-16994 - Clay Geosynthetic Barriers. Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)
- BS-EN-17190 - Flexible sheets for waterproofing. Solar Reflectance Index
- BS-EN-17643 - Bitumen and bituminous binders. Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR). BTSV test
- BS-EN-17872 - Flexible sheets for waterproofing. Underlays for discontinuous roof coverings. Artificial ageing procedure
- BS-EN-17873 - Flexible sheets for waterproofing. Underlays for discontinuous roof coverings and walls. Instructions for mounting and fixing for reaction to fire testing
- BS-EN-1844 - Flexible sheets for waterproofing. Determination of resistance to ozone. Plastic and rubber sheets for roof waterproofing
- BS-EN-1847 - Flexible sheets for waterproofing. Plastics and rubber sheets for roof waterproofing. Methods for exposure to liquid chemicals, including water
- BS-EN-1848-1 - Flexible sheets for waterproofing. Determination of length, width and straightness
- BS-EN-1848-2 - Flexible sheets for waterproofing. Determination of length, width and straightness
- BS-EN-1849-1 - Flexible sheets for waterproofing. Determination of thickness and mass per unit area
- BS-EN-1849-2 - Flexible sheets for waterproofing. Determination of thickness and mass per unit area
- BS-EN-1850-1 - Flexible sheets for waterproofing. Determination of visible defects
- BS-EN-1850-2 - Flexible sheets for waterproofing. Determination of visible defects
- BS-EN-1928 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of watertightness
- BS-EN-1931 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of water vapour transmission properties
- BS-EN-26927 - Building construction. Jointing products. Sealants. Vocabulary
- BS-EN-28339 - Building Construction, Jointing Products, Sealants, Determination of Tensile Propertie
- BS-EN-28340 - Building Construction, Jointing Products, Sealants, Determination of Tensile Propertie
- BS-EN-495-5 - Flexible sheets for waterproofing. Determination of foldability at low temperature
- BS-EN-534 - Corrugated bitumen sheets. Product specification and test methods
- BS-EN-544 - Bitumen shingles with mineral and/or synthetic reinforcements. Product specification and test methods
- BS-EN-58 - Bitumen and bituminous binders. Sampling bituminous binders
- BS-EN-ISO-10563 - Building and civil engineering sealants. Determination of change in mass and volume
- BS-EN-ISO-10563-TC - Tracked Changes. Building and civil engineering sealants. Determination of change in mass and volume
- BS-EN-ISO-10590 - Building construction. Sealants. Determination of tensile properties of sealants at maintained extension after immersion in water
- BS-EN-ISO-10591 - Building and civil engineering sealants. Determination of adhesion/cohesion properties of sealants after immersion in water
- BS-EN-ISO-10591-TC - Tracked Changes. Building and civil engineering sealants. Determination of adhesion/cohesion properties of sealants after immersion in water
- BS-EN-ISO-11431 - Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass
- BS-EN-ISO-11432 - Building and civil engineering sealants. Determination of resistance to compression
- BS-EN-ISO-11432-TC - Tracked Changes. Building and civil engineering sealants. Determination of resistance to compression
- BS-EN-ISO-11600 - Building construction. Jointing products. Classification and requirements for sealants
- BS-EN-ISO-15651 - Nuclear energy. Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets. Inert gas extraction and conductivity detection method
- BS-EN-ISO-6927 - Buildings and civil engineering sealants. Vocabulary
- BS-EN-ISO-6927-TC - Tracked Changes. Buildings and civil engineering sealants. Vocabulary
- BS-EN-ISO-8339 - Building construction. Sealants. Determination of tensile properties (extension to break)
- BS-EN-ISO-8340 - Building construction. Sealants. Determination of tensile properties at maintained extension
- BS-EN-ISO-9046 - Building and civil engineering sealants. Determination of adhesion/cohesion properties at constant temperature
- BS-EN-ISO-9046-TC - Tracked Changes. Building and civil engineering sealants. Determination of adhesion/cohesion properties at constant temperature
- BS-ISO-11527-TC - Tracked Changes. Buildings and civil engineering works. Sealants. Test method for the determination of stringiness
- BS-ISO-11528 - Buildings and civil engineering works. Sealants. Determination of crazing and cracking following exposure to artificial or natural weathering
- BS-ISO-11600 - Building Construction, Jointing Products, Classification & Requirements for Sealants
- BS-ISO-11617 - Building and civil engineering sealants. Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling
- BS-ISO-11617-TC - Tracked Changes. Building and civil engineering sealants. Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling
- BS-ISO-13638 - Building and civil engineering sealants. Determination of resistance to prolonged exposure to water
- BS-ISO-13640 - Buildings and civil engineering works. Sealants. Specifications for test substrates
- BS-ISO-13640-TC - Tracked Changes. Buildings and civil engineering works. Sealants. Specifications for test substrates
- BS-ISO-16938-1 - Buildings and civil engineering works. Determination of the staining of porous substrates by sealants used in joints
- BS-ISO-16938-2 - Buildings and civil engineering works. Determination of the staining of porous substrates by sealants used in joints
- BS-ISO-19863 - Buildings and civil engineering works. Sealants. Determination of tear resistance
- BS-ISO-21265 - Building and civil engineering sealants. Assessment of the fungal growth on sealant surfaces
- BS-ISO-23658 - Buildings and civil engineering works. Sealants. Testing of adhesion properties using a bead peel test
- BS-ISO-24070-1 - Building and civil engineering sealants. Determination of cured thickness of one-component sealant
- BS-ISO-24070-2 - Building and civil engineering sealants. Determination of cured thickness of one-component sealant
- BS-ISO-3867 - Composition cork. Expansion joint fillers. Test methods
- BS-ISO-3867-TC - Tracked Changes. Composition cork. Expansion joint fillers. Test methods
- BS-ISO-3869 - Agglomerated cork. Expansion joint fillers. Specifications, packaging and marking
- BS-ISO-4781 - Building and civil engineering sealants. Determination of application life
- BS-ISO-5892 - Rubber building gaskets. Materials for preformed solid vulcanized structural gaskets. Specification
- DD-232 - Method for determination of the maximum binder content of bituminous mixtures without excessive binder drainage
- DD-248 - Determination of the hot storage stability of modified bitumen binders
- DD-CEN-15324 - Bitumen and bituminous binders. Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode
- DD-CEN-15325 - Bitumen and bituminous binders. Determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode
- DD-CEN-15963 - Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- PD-CEN-15963 - Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- PD-CEN-16346 - Bituminous binders. Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate
- PD-CEN-16625 - Flexible sheets for waterproofing. Statistical definition of manufacturer's limiting value and declared value (MLV and MDV). 95 % Statistic
- PD-CEN-17048 - Flexible sheets for waterproofing. Plastic and rubber sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete. Definitions and characteristics
- PD-CEN-17068 - Sealants for non-structural use in joints in buildings and pedestrian walkways. Guidance for CE marking and Declaration of Performance (DoP)
- PD-CEN-17481 - Bitumen and bituminous binders. Determination of salt content in bitumen. Electrical conductivity method
- PD-CEN-17482 - Bitumen and bituminous binders. Determination of acid number of bitumen. Potentiometric method
- PD-CEN-17499 - Bitumen and bituminous binders. Examples for CE Marking and Declaration of Performances (DoP)
- PD-CEN-17659 - Design guideline for mechanically fastened roof waterproofing systems
- PD-ISO-20436 - Buildings and civil engineering works. Sealants. Paintability and paint compatibility of sealants
ISO:
- ISO-10563 - Building and civil engineering sealants - Determination of change in mass and volume
- ISO-10590 - Building construction - Sealants -- Determination of tensile properties of sealants at maintained extension after immersion in water
- ISO-10591 - Building and civil engineering sealants - Determination of adhesion/cohesion properties of sealants after immersion in water
- ISO-11431 - Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass
- ISO-11432 - Building and civil engineering sealants - Determination of resistance to compression
- ISO-11527 - Buildings and civil engineering works - Sealants - Test method for the determination of stringiness
- ISO-11528 - Buildings and civil engineering works - Sealants - Determination of crazing and cracking following exposure to artificial or natural weathering
- ISO-11600 - Building construction - Jointing products - Classification and requirements for sealants
- ISO-11600-AM1 - Building construction - Sealants - Classification and requirements - Amendment 1
- ISO-11617 - Building and civil engineering sealants - Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling
- ISO-11618 - Buildings and Civil Engineering Works - Sealants - Classification and requirements for pedestrian walkway sealants
- ISO-13638 - Building and civil engineering sealants - Determination of resistance to prolonged exposure to water
- ISO-13640 - Buildings and civil engineering works - Sealants - Specifications for test substrates
- ISO-16938-1 - Buildings and civil engineering works - Determination of the staining of porous substrates by sealants used in joints - Part 1: Test with compression
- ISO-16938-2 - Buildings and civil engineering works - Determination of the staining of porous substrates by sealants used in joints - Part 2: Test without compression
- ISO-19861 - Buildings and civil engineering works - Sealants - Determination of curing behaviour
- ISO-19862 - Buildings and civil engineering works - Sealants - Durability to extension compression cycling under accelerated weathering
- ISO-19863 - Buildings and civil engineering works - Sealants - Determination of tear resistance
- ISO-20436 - Buildings and civil engineering works - Sealants - Paintability and paint compatibility of sealants
- ISO-21265 - Building and civil engineering sealants - Assessment of the fungal growth on sealant surfaces
- ISO-23658 - Buildings and civil engineering works - Sealants - Testing of adhesion properties using a bead peel test
- ISO-23869 - Building and civil engineering sealants - Determination of self-levelling properties
- ISO-24068-1 - Building and civil engineering sealants - Determination of the degree of cure - Part 1: Build-up of tensile properties in dumbbell-shaped specimens
- ISO-24068-2 - Building and civil engineering sealants - Determination of the degree of cure - Part 2: Build-up of tensile and adhesion properties in test joint specimens
- ISO-24070-1 - Building and civil engineering sealants - Determination of cured thickness of one-component sealant - Part 1: Taper-shaped groove test method
- ISO-24070-2 - Building and civil engineering sealants - Determination of cured thickness of one-component sealant - Part 2: Cylindrical cup test method
- ISO-3867 - Composition cork - Expansion joint fillers - Test methods
- ISO-3869 - Agglomerated cork - Expansion joint fillers - Specifications, packaging and marking
- ISO-3934 - Rubber, vulcanized and thermoplastic - Preformed gaskets used in buildings - Classification, specifications and test methods
- ISO-4635 - Rubber, vulcanized - Preformed joint seals for use between concrete paving sections of highways - Specification
- ISO-4781 - Building and civil engineering sealants - Determination of application life
- ISO-4784 - Building and civil engineering sealants - Determination of surface cure time
- ISO-5892 - Rubber building gaskets - Materials for preformed solid vulcanized structural gaskets - Specification
- ISO-6927 - Building and civil engineering sealants - Vocabulary
- ISO-7389 - Building construction - Jointing products - Determination of elastic recovery of sealants
- ISO-7390 - Building construction - Jointing products - Determination of resistance to flow of sealants
- ISO-8339 - Building construction - Sealants - Determination of tensile properties (Extension to break)
- ISO-8340 - Building construction - Sealants - Determination of tensile properties at maintained extension
- ISO-8394 - Building construction -- Jointing products -- Determination of extrudability of one-component sealants
- ISO-8394-1 - Building construction - Jointing products - Part 1: Determination of extrudability of sealants
- ISO-8394-2 - Buildings and civil engineering works - Determination of extrudability for sealant - Part 2: Using standardized apparatus
- ISO-9046 - Building and civil engineering sealants - Determination of adhesion/cohesion properties at constant temperature
- ISO-9047 - Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures
- ISO-9048 - Building construction -- Jointing products -- Determination of extrudability of sealants using standardized apparatus
Other SDOs:
- DIN-52005 - Bitumen and bituminous binders - Determination of ash
- DIN-52455-1 - Testing of sealing compounds in buildings constructions - Adhesion and expansion test - Part 1: Conditioning in standard atmospheres, water or increased temperatures
- DIN-EN-12592 - Bitumen and bituminous binders - Determination of solubility; German version EN 12592:2014
- DIN-EN-12594 - Bitumen and bituminous binders - Preparation of test samples; German version EN 12594:2014
- DIN-EN-12595 - Bitumen and bituminous binders - Determination of kinematic viscosity; German version EN 12595:2014
- DIN-EN-12596 - Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary; German version EN 12596:2014
- DIN-EN-12606-1 - Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation; German version EN 12606-1:2015
- DIN-EN-12607-1 - Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method; German version EN 12607-1:2014
- DIN-EN-12607-2 - Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 2: TFOT Method; German version EN 12607-2:2014
- DIN-EN-12607-3 - Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 3: RFT Method; German version EN 12607-3:2014
- DIN-EN-12691 - Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact; German version EN 12691:2006
- DIN-EN-12847 - Bitumen & Bituminous Binders - Determination of Settling Tendency of Bituminous Emulsi
- DIN-EN-12848 - Bitumen & Bituminous Binders - Determination of Mixing Stability With Cement of Bitume
- DIN-EN-12849 - Bitumen & Bituminous Binders - Determination of Penetration Power of Bituminous Emuls
- DIN-EN-12850 - Bitumen & Bituminous Binders - Determination of the Ph Value Bituminous Emulsions
- DIN-EN-1297 - Flexible Sheets for Waterproofing, Bitumen, Plastic & Rubber Sheets for Roof Waterproo
- DIN-EN-13075-1 - Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method; German version EN 13075-1:2016
- DIN-EN-13075-2 - Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions; German version EN 13075-2:2016
- DIN-EN-13108-21 - Bituminous mixtures - Material specifications - Part 21: Factory Production Control; German version EN 13108-21:2016
- DIN-EN-13301 - Bitumen & Bituminous Binders - Determination of Staining Tendency of Bitumen
- DIN-EN-13302 - Bitumen & Bituminous Binders - Determination of Dynamic Viscosity of Bituminous Binder
- DIN-EN-13303 - Bitumen & Bituminous Binders - Determination of the Loss in Mass After Heating of Ind
- DIN-EN-13304 - Bitumen & Bituminous Binders - Framework for Specification of Oxidized Bitumens
- DIN-EN-13305 - Bitumen & Bituminous Binders - Framework for Specification of Hard Industrial Bitumens
- DIN-EN-13358 - Bitumen and Bituminous Binders - Determination of the Distillation Characteristics of Cu
- DIN-EN-13361 - Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams; German version EN 13361:2013
- DIN-EN-13362 - Geosynthetic barriers - Characteristics required for use in the construction of canals; German version EN 13362:2013
- DIN-EN-13375 - Flexible Sheets for Waterproofing, Waterproofing of Concrete Bridge Decks & Other Conc
- DIN-EN-13398 - Bitumen & Bituminous Binders - Determination of the Elastic Recovery of Modified Bitu
- DIN-EN-13454-1 - Part 1: Definitions & Requirements, Binders, Composite Binders & Factory-Made Mixtures
- DIN-EN-13454-2 - Part 2: Test Methods, Binders, Composite Binders & Factory Made Mixtures for Floor Scr
- DIN-EN-13491 - Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures; German version EN 13491:2013
- DIN-EN-13492 - Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment; German version EN 13492:2013
- DIN-EN-13493 - Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites; German version EN 13493:2013
- DIN-EN-13587 - Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method; German version EN 13587:2016
- DIN-EN-13588 - Bitumen & Bituminous Binders - Determination of Cohesion of Bituminous Binders With P
- DIN-EN-13589 - Bitumen & Bituminous Binders - Determination of the Tensile Properties of Modified Bi
- DIN-EN-13596 - Flexible Sheets for Waterproofing, Waterproofing of Concrete Bridge Decks & Other Conc
- DIN-EN-13632 - Bitumen & Bituminous Binders - Visualization of Polymer Dispersion in Polymer Modified
- DIN-EN-13653 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of shear strength; German version EN 13653:2017
- DIN-EN-13703 - Bitumen and bituminous binders - Determination of deformation energy; German version EN 13703:2003
- DIN-EN-13707 - Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics; German version EN 13707:2013
- DIN-EN-13719 - Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers; German version EN 13719:2016
- DIN-EN-13738 - Geotextiles & GEOTEXTILE-Related Products, Determination of Pullout Resistance in Soi
- DIN-EN-13808 - Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions; German version EN 13808:2013
- DIN-EN-13859-1 - Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing; German version EN 13859-1:2014
- DIN-EN-13859-2 - Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls; German version EN 13859-2:2014
- DIN-EN-13897 - Flexible Sheets for Waterproofing, Bitumen, Plastic & Rubber Sheets for Roof Waterproo
- DIN-EN-13956 - Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics; German version EN 13956:2012
- DIN-EN-13967 - Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics; German version EN 13967:2012+A1:2017
- DIN-EN-13969 - Flexible Sheets for Waterproofing - Bitumen Damp Proof Sheets Including Bitumen Baseme
- DIN-EN-13970 - Flexible Sheets for Waterproofing, Bitumen Water Vapour Control Layers, Definitions &
- DIN-EN-13970/A1 - Flexible Sheets for Waterproofing - Bitumen Water Vapour Control Layers - Definitions
- DIN-EN-13984 - Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics; German version EN 13984:2013
- DIN-EN-13984/A1 - Flexible Sheets for Waterproofing - Plastic & Rubber Vapour Control Layers - Definiti
- DIN-EN-14196 - Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers; German version EN 14196:2016
- DIN-EN-14223 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption; German version EN 14223:2017
- DIN-EN-14224 - Flexible Sheets for Waterproofing - Waterproofing of Concrete Bridge Decks & Other Con
- DIN-EN-1425 - Bitumen and bituminous binders - Characterization of perceptible properties
- DIN-EN-1426 - Bitumen and bituminous binders - Determination of needle penetration; German version EN 1426:2015
- DIN-EN-1427 - Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method; German version EN 1427:2015
- DIN-EN-14575 - Geosynthetic Barriers, Screening Test Method for Determining the Resistance To Oxidati
- DIN-EN-14691 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Compatibility by heat conditioning; German version EN 14691:2017
- DIN-EN-14692 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer; German version EN 14692:2017
- DIN-EN-14693 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt; German version EN 14693:2017
- DIN-EN-14694 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment; German version EN 14694:2017
- DIN-EN-14733 - Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control; German version EN 14733:2005+A1:2010
- DIN-EN-14769 - Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
- DIN-EN-14770 - Bitumen and bituminous binders - Determination of complex shear modulus and phase angle using a Dynamic Shear Rheometer (DSR)
- DIN-EN-14771 - Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
- DIN-EN-14895 - Bitumen & Bituminous Binders - Stabilization of Binder From Bituminous Emulsions or F
- DIN-EN-14896 - Bitumen & Bituminous Binders - Dynamic Viscosity of Bituminous Emulsions, Cut-Back & F
- DIN-EN-14909 - Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
- DIN-EN-14967 - Flexible Sheets for Waterproofing - Bitumen Damp Proof Courses - Definitions & Charact
- DIN-EN-15326 - Bitumen & Bituminous Binders - Measurement of Density & Specific Gravity - Capillary-S
- DIN-EN-534 - Corrugated Bitumen Sheets - Product Specification & Test Methods
- DIN-EN-544 - Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods
- DIN-EN-58 - Bitumen and bituminous binder - Sampling bituminous binders
- DIN-EN-ISO-10563 - Buildings and civil engineering works - Sealants - Determination of change in mass and volume
- DIN-EN-ISO-10590 - Building Construction - Sealants, Determination of Tensile Properties of Sealants at M
- DIN-EN-ISO-10591 - Building Construction - Sealants, Determination of Adhesion/Cohesion Properties of Sea
- DIN-EN-ISO-11432 - Building Construction - Sealants, Determination of Resistance To Compression
- DIN-EN-ISO-11600 - Building construction - Jointing products - Classification and requirements for sealants
- DIN-EN-ISO-13428 - Geosynthetics, Determination of the Protection Efficiency of a Geosynthetic Against Im
- DIN-EN-ISO-8339 - Building Construction - Sealants, Determination of Tensile Properties (Extension To Br
- DIN-EN-ISO-8340 - Building Construction - Sealants, Determination of Tensile Properties at Maintained Ex
- DIN-EN-ISO-9046 - Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature
- DIN-EN-ISO-9047 - Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures
- EN-1107-1 - Part 1: Bitumen Sheets for Roof Waterproofing - Determination of Dimensional Stability
- EN-1108 - Determination of Form Stability Under Cyclical Temperature Changes, Flexible Sheets Fo
- EN-1109 - Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature
- EN-1110 - Flexible Sheets for Waterproofing - Bitumen Sheets for Roof Waterproofing - Determina
- EN-12039 - Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules
- EN-12311-2 - Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing
- EN-12316-2 - Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
- EN-12317-2 - Part 2: Plastic & Rubber Sheets for Roof Waterproofing, Flexible Sheets for Waterproof
- EN-12591 - Bitumen & Bituminous Binders, Specifications for Paving Grade Bitumens
- EN-12592 - Bitumen and bituminous binders - Determination of solubility
- EN-12593 - Bitumen and bituminous binders - Determination of the Fraass breaking point
- EN-12594 - Bitumen and bituminous binders - Preparation of test samples
- EN-12595 - Bitumen and bituminous binders - Determination of kinematic viscosity
- EN-12596 - Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary
- EN-12597 - Bitumen and bituminous binders - Terminology
- EN-12606-1 - Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation
- EN-12607-1 - Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method
- EN-12607-2 - Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 2: TFOT method
- EN-12607-3 - Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 3: RFT method
- EN-12691 - Flexible Sheets for Waterproofing, Bitumen, Plastic & Rubber Sheets for Roof Waterproo
- EN-12730 - Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to static loading
- EN-12847 - Bitumen & Bituminous Binders - Determination of Settling Tendency of Bituminous Emulsi
- EN-12848 - Bitumen & Bituminous Binders - Determination of Penetration Power of Bituminous Emuls
- EN-12849 - Bitumen & Bituminous Binders, Determination of Penetration Power of Bitumen Emulsions
- EN-12850 - Bitumen & Bituminous Binders, Determination of the Ph Value Bituminous Emulsions
- EN-1297 - Flexible Sheets for Waterproofing, Bitumen, Plastic & Rubber Sheets for Roof Waterproo
- EN-13074 - Bitumen & Bituminous Binders, Recovery of Binder From Bitumen Emulsions by Evaporation
- EN-13075-1 - Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method
- EN-13075-2 - Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions
- EN-13111 - Flexible Sheets for Waterproofing - Underlays for Discontinuous Roofing & Walls - Dete
- EN-13301 - Bitumen & Bituminous Binders - Determination of Staining Tendency of Bitumen
- EN-13302 - Bitumen & Bituminous Binders - Determination of Dynamic Viscosity of Bituminous Binder
- EN-13303 - Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen
- EN-13304 - Bitumen & Bituminous Binders - Framework for Specification of Oxidized Bitumens
- EN-13305 - Bitumen & Bituminous Binders - Framework for Specification of Hard Industrial Bitumens
- EN-13358 - Bitumen & Bituminous Binders - Determination of the Distillation Characteristics of Cu
- EN-13361 - Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
- EN-13362 - Geosynthetic barriers - Characteristics required for use in the construction of canals
- EN-13375 - Flexible Sheets for Waterproofing, Waterproofing of Concrete Bridge & Other Concrete S
- EN-13398 - Bitumen & Bituminous Binders - Determination of the Elastic Recovery of Modified Bitu
- EN-13454-1 - Part 1: Definitions & Requirements, Binders, Composite Binders & Factory-Made Mixtures
- EN-13454-2 - Binders for floor screeds based on calcium sulphate - Part 2: Test methods
- EN-13491 - Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures
- EN-13492 - Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
- EN-13493 - Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
- EN-13583 - Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance
- EN-13587 - Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
- EN-13588 - Bitumen & Bituminous Binders - Determination of Cohesion of Bituminous Binders With P
- EN-13589 - Bitumen & Bituminous Binders, Determination of the Tensile Properties of Modified Bitu
- EN-13596 - Flexible Sheets for Waterproofing, Waterproofing of Concrete Bridge Decks & Other Conc
- EN-13653 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of shear strength
- EN-13702-2 - Part 2: Coaxial Cylinders Method, Bitumen & Bituminous Binders, Determination of Dynam
- EN-13703 - Bitumen & Bituminous Binders, Determination of Deformation Energy
- EN-13707 - Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
- EN-13719 - Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers
- EN-13733 - Products & Systems for the Protection & Repair of Concrete Structures, Test Methods -
- EN-13738 - Geotextiles & GEOTEXTILE-Related Products, Determination of Pullout Resistance in Soi
- EN-13808 - Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions
- EN-13859-1 - Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
- EN-13859-2 - Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
- EN-13897 - Flexible Sheets for Waterproofing, Bitumen, Plastic & Rubber Sheets for Roof Waterproo
- EN-13924-2 - Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens
- EN-13948 - Flexible Sheets for Waterproofing - Bitumen, Plastic & Rubber Sheets for Roof Waterpro
- EN-13956 - Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
- EN-13967 - Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
- EN-13969 - Flexible Sheets for Waterproofing - Bitumen Damp Proof Sheets Including Bitumen Baseme
- EN-13970 - Flexible Sheets for Waterproofing, Bitumen Water Vapour Control Layers, Definitions &
- EN-13970/A1 - Flexible Sheets for Waterproofing - Bitumen Water Vapour Control Layers - Definitions
- EN-13984 - Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
- EN-13984/A1 - Flexible Sheets for Waterproofing - Plastic and Rubber Vapour Control Layers - Definiti
- EN-14151 - Geosynthesis - Determination of Burst Strength
- EN-14188-3 - Part 3: Specifications for Preformed Joint Seals, Joint Fillers & Sealants
- EN-14196 - Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
- EN-14223 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption
- EN-14224 - Flexible Sheets for Waterproofing - Waterproofing of Concrete Bridge Decks & Other Con
- EN-1425 - Bitumen and bituminous binders - Characterization of perceptible properties
- EN-1426 - Bitumen and bituminous binders - Determination of needle penetration
- EN-1427 - Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method
- EN-1428 - Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method
- EN-1429 - Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving
- EN-1430 - Bitumen & Bituminous Binders - Determination of Particle Polarity of Bituminous Emulsi
- EN-1431 - Bitumen & Bituminous Binders - Determination of Residual Binder & Oil Distillate From
- EN-14575 - Geosynthetic Barriers, Screening Test Method for Determining the Resistance To Oxidati
- EN-14691 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Compatibility by heat conditioning
- EN-14692 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer
- EN-14693 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of waterproofing sheets during application of mastic asphalt
- EN-14694 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment
- EN-14695 - Flexible Sheets for Waterproofing - Reinforced Bitumen Sheets for Waterproofing of Con
- EN-14733 - Bitumen & Bituminous Binders - Bituminous Emulsions, Fluxed & Cut-Back Bitumen Factor
- EN-14769 - Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
- EN-14770 - Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)
- EN-14771 - Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
- EN-14891 - Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation
- EN-14895 - Bitumen & Bituminous Binders - Stabilization of Binder From Bituminous Emulsions or F
- EN-14896 - Bitumen & Bituminous Binders - Dynamic Viscosity of Bituminous Emulsions, Cut-Back & F
- EN-14909 - Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
- EN-14967 - Flexible Sheets for Waterproofing, Bitumen Damp Proof Courses, Definitions & Character
- EN-15322 - Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders
- EN-15323 - Bitumen & Bituminous Binders, Accelerated Long-Term Ageing/Conditioning by the Rotatin
- EN-15326 - Bitumen & Bituminous Binders - Measurement of Density & Specicif Gravity - Capillary-S
- EN-15368 - Hydraulic Binder for Non-Structural Applications - Definition, Specifications & Confor
- EN-1548 - Flexible Sheets for Waterproofing, Plastic & Rubber Sheets for Roof Waterproofing, Met
- EN-15651-1 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
- EN-15651-2 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
- EN-15651-3 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
- EN-15651-4 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
- EN-15651-5 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Evaluation of conformity and marking
- EN-15812 - Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability
- EN-15813 - Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures
- EN-15814 - Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements
- EN-15815 - Polymer modified bituminous thick coatings for waterproofing - Resistance to compression
- EN-15816 - Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain
- EN-15817 - Polymer modified bituminous thick coatings for waterproofing - Water resistance
- EN-15818 - Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature
- EN-15819 - Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried
- EN-15820 - Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness
- EN-15976 - Flexible sheets for waterproofing - Determination of emissivity
- EN-16002 - Flexible Sheets for Waterproofing - Determination of the Resistance To Wind Load of Me
- EN-16345 - Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer
- EN-16416 - Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head
- EN-16659 - Bitumen and Bituminous Binders - Multiple Stress Creep and Recovery Test (MSCRT)
- EN-16849 - Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
- EN-16993 - Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids
- EN-16994 - Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)
- EN-1844 - Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing
- EN-1847 - Flexible Sheets for Waterproofing - Plastics & Rubber Sheets for Roof Waterproofing -
- EN-1848-1 - Part 1: Bitumen Sheets for Roof Waterproofing, Flexible Sheets for Waterproofing - Det
- EN-1849-2 - Flexible Sheets for Waterproofing, Determination of Thickness & Mass per Unit Area, Pl
- EN-495-5 - Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing
- EN-534 - Corrugated Bitumen Sheets - Product Specification & Test Methods
- EN-544 - Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods
- EN-58 - Bitumen and bituminous binders - Sampling bituminous binders
- EN-ISO-10563 - Buildings and civil engineering works - Sealants - Determination of change in mass and volume
- EN-ISO-10590 - Building Construction - Sealants, Determination of Tensile Properties of Sealants at M
- EN-ISO-10591 - Building Construction - Sealants, Determination of Adhesion/Cohesion Properties of Sea
- EN-ISO-11432 - Building Construction - Sealants, Determination of Resistance To Compression
- EN-ISO-11600 - Building Construction - Jointing Products, Classification &Requirements for Sealants
- EN-ISO-6927 - Buildings and civil engineering works - Sealants - Vocabulary (ISO 6927:2012)
- EN-ISO-8339 - Building Construction - Sealants, Determination of Tensile Properties (Extension To Br
- EN-ISO-8340 - Building Construction - Sealants, Determination of Tensile Properties at Maintained Ex
- EN-ISO-8394-1 - Building construction - Jointing products - Part 1: Determination of extrudability of sealants (ISO 8394-1:2010)
- EN-ISO-8394-2 - Building construction - Jointing products - Part 2: Determination of extrudability of sealants using standardized apparatus (ISO 8394-2:2010)
- EN-ISO-9046 - Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature
- JIS-A-5756 - Performed gaskets used in buildings -- Classification, specifications and test methods
- JIS-A-5758 - Sealants for sealing and glazing in buildings
- SIS-CEN/TR-16625 - Flexible sheets for waterproofing - Statistical definition of manufacturer's limiting value and declared value (MLV and MDV) - 95 % Statistic
- SIS-CEN/TR-17499 - Bitumen and bituminous binders - Examples for CE Marking and Declaration of Performances (DoP)
- SIS-CEN/TS-15963 - Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- SIS-CEN/TS-17481 - Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method
- SIS-CEN/TS-17482 - Bitumen and bituminous binders - Determination of acid number of bitumen - Potentiometric method
- SIS-CEN/TS-17659 - Design guideline for mechanically fastened roof waterproofing systems
- SS-EN-1107-1 - Flexible sheets for waterproofing - Determination of dimensional stability - Part 1: Bitumen sheets for roof waterproofing
- SS-EN-1107-2 - Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing
- SS-EN-1108 - Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes
- SS-EN-1109 - Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature
- SS-EN-1110 - Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow resistance at elevated temperature
- SS-EN-12039 - Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules
- SS-EN-12310-1 - Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of resistance to tearing (nail shank)
- SS-EN-12310-2 - Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing
- SS-EN-12311-1 - Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties
- SS-EN-12311-2 - Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing
- SS-EN-12316-1 - Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints
- SS-EN-12316-2 - Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
- SS-EN-12317-1 - Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints
- SS-EN-12317-2 - Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
- SS-EN-12591 - Bitumen and bituminous binders - Specifications for paving grade bitumens
- SS-EN-12592 - Bitumen and bituminous binders - Determination of solubility
- SS-EN-12593 - Bitumen and bituminous binders - Determination of the Fraass breaking point
- SS-EN-12594 - Bitumen and bituminous binders - Preparation of test samples
- SS-EN-12595 - Bitumen and bituminous binders - Determination of kinematic viscosity
- SS-EN-12596 - Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary
- SS-EN-12597 - Bitumen and bituminous binders - Terminology
- SS-EN-12606-1 - Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation
- SS-EN-12607-1 - Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method
- SS-EN-12607-2 - Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 2: TFOT method
- SS-EN-12607-3 - Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 3: RFT method
- SS-EN-12691 - Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact
- SS-EN-12730 - Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to static loading
- SS-EN-12846 - Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer
- SS-EN-12846-1 - Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions
- SS-EN-12846-2 - Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
- SS-EN-12847 - Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions
- SS-EN-12848 - Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions
- SS-EN-12849 - Bitumen and bituminous binders - Determination of penetration power of bituminous emulsions
- SS-EN-12850 - Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions
- SS-EN-12860 - Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
- SS-EN-1296 - Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature
- SS-EN-1297 - Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water
- SS-EN-12970 - Mastic asphalt for waterproofing - Definitions, requirements and test methods
- SS-EN-13074 - Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation
- SS-EN-13074-1 - Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation
- SS-EN-13074-2 - Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilization after recovery by evaporation
- SS-EN-13075-1 - Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method
- SS-EN-13075-2 - Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions
- SS-EN-13111 - Flexible sheets for waterproofing - Underlays for discontinuous roofing and walls - Determination of resistance to water penetration
- SS-EN-13243 - Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems
- SS-EN-13301 - Bitumen and bituminous binders - Determination of staining tendency of bitumen
- SS-EN-13302 - Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
- SS-EN-13303 - Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen
- SS-EN-13304 - Bitumen and bituminous binders - Framework for specification of oxidised bitumens
- SS-EN-13305 - Bitumen and bituminous binders - Framework for specification of hard industrial bitumens
- SS-EN-13357 - Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens
- SS-EN-13358 - Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes
- SS-EN-13361 - Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
- SS-EN-13361-AM1 - Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
- SS-EN-13362 - Geosynthetic Barriers - Characteristics required for use in the construction of canals
- SS-EN-13375 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation
- SS-EN-13398 - Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen
- SS-EN-13399 - Bitumen and bituminous binders - Determination of storage stability of modified bitumen
- SS-EN-13416 - Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling
- SS-EN-13445 - Unfired pressure vessels
- SS-EN-13454-1 - Binders, composite binders and factory made mixtures for floor screeds based on calcium sulphate - Part 1: Definitions and requirements
- SS-EN-13454-2 - Binders for floor screeds based on calcium sulphate - Part 2: Test methods
- SS-EN-13491 - Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures
- SS-EN-13491-AM1 - Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
- SS-EN-13492 - Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
- SS-EN-13492-AM1 - Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
- SS-EN-13493 - Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
- SS-EN-13583 - Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance
- SS-EN-13587 - Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
- SS-EN-13588 - Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test
- SS-EN-13589 - Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method
- SS-EN-13596 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of bond strength
- SS-EN-13614 - Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test
- SS-EN-13632 - Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen
- SS-EN-13653 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of shear strength
- SS-EN-13702 - Bitumen and bituminous binders - Determination of dynamic viscosity of bitumen and bituminous binders by the cone and plate method
- SS-EN-13702-1 - Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Part 1: Cone and plate method
- SS-EN-13702-2 - Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Part 2: Coaxial cylinders method
- SS-EN-13703 - Bitumen and bituminous binders - Determination of deformation energy
- SS-EN-13707 - Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
- SS-EN-13707-AM1 - Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
- SS-EN-13719 - Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers
- SS-EN-13738 - Geotextiles and geotextile-related products - Determination of pullout resistance in soil
- SS-EN-13808 - Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions
- SS-EN-13859-1 - Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
- SS-EN-13859-2 - Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
- SS-EN-13897 - Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness after stretching at low temperature
- SS-EN-13924-2 - Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens
- SS-EN-13948 - Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to root penetration
- SS-EN-13956 - Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
- SS-EN-13967 - Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
- SS-EN-13967-AM1 - Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
- SS-EN-13969 - Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
- SS-EN-13969-AM1 - Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
- SS-EN-13970 - Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
- SS-EN-13970-AM1 - Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
- SS-EN-13984 - Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
- SS-EN-13984-AM1 - Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
- SS-EN-14016-1 - Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements
- SS-EN-14016-2 - Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods
- SS-EN-14151 - Geosynthetics - Determination of burst strength
- SS-EN-14187-3 - Cold applied joint sealants - Test methods - Part 3: Determination of self-levelling properties
- SS-EN-14188-3 - Joint fillers and sealants - Part 3: Specifications for preformed joint seals
- SS-EN-14196 - Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
- SS-EN-14223 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption
- SS-EN-14224 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of crack bridging ability
- SS-EN-14241-1 - Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners
- SS-EN-1425 - Bitumen and bituminous binders - Characterization of perceptible properties
- SS-EN-1425-AM1 - Bitumen and bituminous binders - Characterization of perceptible properties
- SS-EN-1426 - Bitumen and bituminous binders - Determination of needle penetration
- SS-EN-1427 - Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method
- SS-EN-1428 - Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method
- SS-EN-1429 - Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving
- SS-EN-1430 - Bitumen and bituminous binders - Determination of particle polarity of bitumen emulsions
- SS-EN-1431 - Bitumen and bituminous binders - Determination of residual binder and oil distillate from bitumen emulsions by distillation
- SS-EN-14388 - Road traffic noise reducing devices - Specifications
- SS-EN-14575 - Geosynthetic barriers - Screening test method for determining the resistance to oxidation
- SS-EN-14691 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Compatibility by heat conditioning
- SS-EN-14692 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer
- SS-EN-14693 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of waterproofing sheets during application of mastic asphalt
- SS-EN-14694 - Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment
- SS-EN-14695 - Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics
- SS-EN-14733 - Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
- SS-EN-14769 - Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
- SS-EN-14770 - Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)
- SS-EN-14771 - Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
- SS-EN-14891 - Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking
- SS-EN-14895 - Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders
- SS-EN-14896 - Bitumen and bituminous binders - Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders - Rotating spindle viscometer method
- SS-EN-14909 - Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
- SS-EN-14967 - Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics
- SS-EN-15322 - Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders
- SS-EN-15323 - Bitumen and bituminous binders - Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT)
- SS-EN-15326 - Bitumen and bituminous binders - Measurement of density and specific gravity - Capillary-stoppered pyknometer method
- SS-EN-15368 - Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria
- SS-EN-15434-1 - Bonding sealants - Part 1: Bonded glazing sealants for direct light exposure
- SS-EN-1548 - Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Method for exposure to bitumen
- SS-EN-15651-1 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
- SS-EN-15651-2 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
- SS-EN-15651-3 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
- SS-EN-15651-4 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
- SS-EN-15651-5 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling
- SS-EN-15812 - Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability
- SS-EN-15813 - Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures
- SS-EN-15814 - Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements
- SS-EN-15815 - Polymer modified bituminous thick coatings for waterproofing - Resistance to compression
- SS-EN-15816 - Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain
- SS-EN-15817 - Polymer modified bituminous thick coatings for waterproofing - Water resistance
- SS-EN-15818 - Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature
- SS-EN-15819 - Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried
- SS-EN-15820 - Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness
- SS-EN-15976 - Flexible sheets for waterproofing - Determination of emissivity
- SS-EN-16002 - Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing
- SS-EN-16345 - Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer
- SS-EN-16416 - Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head
- SS-EN-16659 - Bitumen and Bituminous Binders - Multiple Stress Creep and Recovery Test (MSCRT)
- SS-EN-16849 - Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
- SS-EN-16993 - Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids
- SS-EN-16994 - Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)
- SS-EN-17190 - Flexible sheets for waterproofing - Solar Reflectance Index
- SS-EN-17643 - Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test
- SS-EN-17686 - Flexible sheets for waterproofing - Determination of the resistance to wind load of roof build-up system with bonded waterproofing systems
- SS-EN-1844 - Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing
- SS-EN-1847 - Flexible sheets for waterproofing - Plastics and rubber sheets for roof waterproofing - Methods for exposure to liquid chemicals, including water
- SS-EN-1848-1 - Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing
- SS-EN-1848-2 - Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing
- SS-EN-1849-1 - Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing
- SS-EN-1849-2 - Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastics and rubber sheets for roof waterproofing
- SS-EN-1850-1 - Flexible sheets for waterproofing - Determination of visible defects - Part 1: Bitumen sheets for roof waterproofing
- SS-EN-1850-2 - Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for roof waterproofing
- SS-EN-1928 - Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness
- SS-EN-1931 - Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of water vapour transmission properties
- SS-EN-1992-1-2 - Eurocode 2 - Design of concrete structures Part 1-2: Structural fire design
- SS-EN-495-5 - Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing
- SS-EN-534 - Corrugated bitumen sheets - Product specification and test methods
- SS-EN-544 - Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods
- SS-EN-58 - Bitumen and bituminous binders - Sampling bituminous binders
- SS-EN-ISO-10563 - Building and civil engineering sealants - Determination of change in mass and volume (ISO 10563:2023)
- SS-EN-ISO-10590 - Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005)
- SS-EN-ISO-10591 - Building and civil engineering sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2021)
- SS-EN-ISO-11431 - Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass
- SS-EN-ISO-11432 - Building and civil engineering sealants - Determination of resistance to compression (ISO 11432:2021)
- SS-EN-ISO-11600 - Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002)
- SS-EN-ISO-11600-AM1 - Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002/Amd 1:2011)
- SS-EN-ISO-6927 - Buildings and civil engineering sealants - Vocabulary (ISO 6927:2021)
- SS-EN-ISO-7389 - Building construction - Jointing products - Determination of elastic recovery of sealants (ISO 7389:2002)
- SS-EN-ISO-7390 - Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2002)
- SS-EN-ISO-8339 - Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO 8339:2005)
- SS-EN-ISO-8340 - Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005)
- SS-EN-ISO-8394-1 - Building construction - Jointing products - Part 1: Determination of extrudability of sealants (ISO 8394-1:2010)
- SS-EN-ISO-8394-2 - Buildings and civil engineering works - Determination of extrudability for sealant - Part 2: Using standardized apparatus (ISO 8394-2:2017)
- SS-EN-ISO-9046 - Building and civil engineering sealants - Determination of adhesion/cohesion properties at constant temperature (ISO 9046:2021)
- SS-EN-ISO-9047 - Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001)
- SS-ISO-11600 - Building construction - Sealants - Classificationand requirements
- SS-ISO-22762-2 - Elastomeric seismic-protection isolators - Part 2: Applications for bridges - Specifications (ISO 22762-2:2018, IDT)
- SS-ISO-3780 - Road vehicles - World manufacturer identifier (WMI) code (ISO 3780:2009, IDT)
- SS-ISO-3934 - Rubber, vulcanized and thermoplastic - Preformed gaskets used in buildings - Classification, specifications and test methods
- SS-ISO-4635 - Rubber, vulcanized - Preformed joint seals for use between concrete paving sections of highways - Specification (ISO 4635:2011, IDT)
- SS-ISO-5892 - Rubber building gaskets - Materials for preformed solid vulcanized structural gaskets - Specification (ISO 5892:2013, IDT)
- UNE-EN-12593 - Bitumen and bituminous binders - Determination of the Fraass breaking point
- UNE-EN-16659 - Bitumen and Bituminous Binders - Multiple Stress Creep and Recovery Test (MSCRT)