Document Center List of Standards on Iron And Steel Pipes Steel Pipes And Tubes For Specific Use, See 77.140.75
ICS Code 23.040.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1005 - Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded (Withdrawn 2014)
- ASTM-A1006 - Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded (Withdrawn 2014)
- ASTM-A1020 - Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications (Withdrawn 2017)
- ASTM-A1024 - Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
- ASTM-A1037 - Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded (Withdrawn 2017)
- ASTM-A1053 - Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
- ASTM-A1057 - Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
- ASTM-A106 - Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
- ASTM-A1065 - Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
- ASTM-A1076 - Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
- ASTM-A1098 - Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)
- ASTM-A1103 - Standard Specification for Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications
- ASTM-A134 - Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
- ASTM-A135 - Standard Specification for Electric-Resistance-Welded Steel Pipe
- ASTM-A139 - Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
- ASTM-A178 - Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
- ASTM-A179 - Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
- ASTM-A192 - Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
- ASTM-A199 - Specification for Seamless Cold-Drawn Intermediate Alloy-Steel Heat-Exchanger and Condenser Tubes (Withdrawn 1995)
- ASTM-A200 - Specification for Seamless Intermediate Alloy-Steel Still Tubes for Refinery Service (Withdrawn 1999)
- ASTM-A209 - Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
- ASTM-A210 - Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
- ASTM-A213 - Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
- ASTM-A214 - Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
- ASTM-A226 - Specification for Electric-Resistance-Welded Carbon Steel Boiler Superheater Tubes for High-Pressure Service (Withdrawn 1997)
- ASTM-A249 - Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
- ASTM-A250 - Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes (Withdrawn 2017)
- ASTM-A252 - Standard Specification for Welded and Seamless Steel Pipe Piles
- ASTM-A268 - Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
- ASTM-A269 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
- ASTM-A270 - Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
- ASTM-A271 - Standard Specification for Seamless Austenitic Chromium-Nickel Steel Still Tubes for Refinery Service (Withdrawn 1999)
- ASTM-A312 - Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
- ASTM-A333 - Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
- ASTM-A334 - Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
- ASTM-A335 - Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
- ASTM-A358 - Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
- ASTM-A369 - Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
- ASTM-A376 - Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
- ASTM-A377 - Standard Index of Specifications for Ductile Iron Pressure Pipe
- ASTM-A381 - Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems
- ASTM-A405 - Specification for Seamless Ferritic Alloy-Steel Pipe Specially Heat Treated for High-Temperature Service (Withdrawn 1995)
- ASTM-A409 - Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
- ASTM-A423 - Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
- ASTM-A430 - Specification for Austentic Steel Forged and Bored Pipe for Hi GH-Temperature Service (Withdrawn 1995)
- ASTM-A450 - Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
- ASTM-A452 - Specification for Centrifugally Cast Austenitic Steel Cold-Wrought Pipe for High-Temperature Service (Withdrawn 1995)
- ASTM-A498 - Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
- ASTM-A501 - Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
- ASTM-A511 - Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
- ASTM-A512 - Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
- ASTM-A513 - Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
- ASTM-A519 - Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
- ASTM-A523 - Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
- ASTM-A524 - Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
- ASTM-A53 - Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
- ASTM-A530 - Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
- ASTM-A539 - Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines (Withdrawn 2004)
- ASTM-A554 - Standard Specification for Welded Stainless Steel Mechanical Tubing
- ASTM-A556 - Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
- ASTM-A587 - Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
- ASTM-A589 - Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
- ASTM-A608 - Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
- ASTM-A618 - Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM-A632 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
- ASTM-A660 - Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
- ASTM-A671 - Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
- ASTM-A672 - Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
- ASTM-A674 - Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
- ASTM-A688 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
- ASTM-A691 - Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
- ASTM-A714 - Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe (Withdrawn 2014)
- ASTM-A716 - Standard Specification for Ductile Iron Culvert Pipe
- ASTM-A746 - Standard Specification for Ductile Iron Gravity Sewer Pipe
- ASTM-A760 - Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
- ASTM-A762 - Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
- ASTM-A771 - Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components
- ASTM-A790 - Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
- ASTM-A795 - Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
- ASTM-A796 - Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
- ASTM-A798 - Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
- ASTM-A803 - Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
- ASTM-A813 - Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
- ASTM-A814 - Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe (Withdrawn 2024)
- ASTM-A826 - Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components (Withdrawn 2004)
- ASTM-A847 - Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
- ASTM-A849 - Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
- ASTM-A851 - Standard Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes (Withdrawn 2002)
- ASTM-A861 - Standard Specification for High-Silicon Iron Pipe and Fittings
- ASTM-A872 - Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
- ASTM-A943 - Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes (Withdrawn 2024)
- ASTM-A949 - Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe (Withdrawn 2024)
- ASTM-A953 - Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing (Withdrawn 2005)
- ASTM-A954 - Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe (Withdrawn 2005)
- ASTM-A972 - Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
- ASTM-A978 - Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications (Withdrawn 2020)
- ASTM-A984 - Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded (Withdrawn 2014)
- ASTM-A999 - Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
- ASTM-B690 - Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Seamless Pipe and Tube
- ASTM-C1277 - Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
- ASTM-E1928 - Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing
- ASTM-E2096 - Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
- ASTM-E213 - Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
- ASTM-E309 - Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
- ASTM-E426 - Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys
- ASTM-F1083 - Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
- ASTM-F1545 - Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
- ASTM-F423 - Standard Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges (Withdrawn 2002)
- ASTM-F491 - Standard Specification for Poly(Vinylidene Fluoride) (PVDF) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2002)
- ASTM-F492 - Standard Specification for Propylene and Polypropylene (PP) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)
- ASTM-F546 - Standard Specification for Perfluoro (Ethylene-Propylene) Copolymer (FEP) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2002)
- ASTM-F599 - Standard Specification for Poly(Vinylidene Chloride) (PVDC) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)
- ASTM-F781 - Standard Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)
BSI:
- BS-1211 - Specification for centrifugally cast (spun) iron pressure pipes for water, gas and sewage
- BS-1387 - Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads
- BS-2035 - Specification for cast iron flanged pipes and flanged fittings
- BS-3600 - Dimensions & Masses per Unit Length of Welded & Seamless Steel Pipes & Tubes for Pressure
- BS-3601 - Specification for Carbon Steel Pipes and Tubes With Specifiedroom Temperature Propertie
- BS-3602-2 - Specification for Steel Pipes & Tubes for Pressure Purposes: Carbon & Carbon Manganese
- BS-3603 - Specification for Carbon & Alloy Steel Pipes & Tubes With Specified Low Temperature Pr
- BS-3605 - Specification for seamless and welded austenitic stainless steel pipes and tubes for pressure purposes
- BS-3605-1 - Austenitic Stainless Steel Pipes & Tubes for Pressure Purposes, Specification for Seam
- BS-3605-2 - Austenitic Stainless Steel Pipes & Tubes for Pressure Purposes, Specification for Long
- BS-437 - Specification for cast iron drain pipes, fittings and their joints for socketed and socketless systems
- BS-4515-1 - Specification for welding of steel pipelines on land and offshore
- BS-4515-2 - Specification for welding of steel pipelines on land and offshore
- BS-4622 - Specification for grey iron pipes and fittings
- BS-4772 - Specification for ductile iron pipes and fittings
- BS-534 - Steel Pipes, Joints & Specials for Water & Sewage, Specification For
- BS-6323-1 - Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposes. General requirements
- BS-6323-4 - Part 4: Specific Requirements for Cold Finished Seamless Steel Tubes, Seamless & Welded St
- BS-6323-5 - Specific Requirements for Electric Resistance Welded (Including Induction Welded) Stee
- BS-6323-6 - Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposes. Specific requirements for cold finished electric resistance welded (including induction welded) steel tubes
- BS-7838 - Specification for Corrugated Stainless Steel Semi-Rigid Pipe and Associated Fittings for Low-Pressure Gas Pipework of Up To DN 50
- BS-7873 - Code of practice for application and testing of hot enamel external and/or internal coating of iron and steel pipes
- BS-7892 - Specification for seal coats on cement mortar lined ductile iron pipes and fittings
- BS-8010-2.1 - Code of practice for pipelines. Pipelines on land: design, construction and installation. Ductile iron
- BS-EN-10208-1 - Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class A
- BS-EN-10208-2 - Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class B
- BS-EN-10216-1 - Seamless steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10216-2 - Seamless steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10216-2-TC - Tracked Changes. Seamless steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10216-3 - Seamless steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10216-4 - Seamless steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10216-5 - Seamless steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10216-5-TC - Tracked Changes. Seamless steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-1 - Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-1-TC - Tracked Changes. Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-2 - Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-3 - Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-4 - Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-5 - Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-6 - Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-7 - Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-7-TC - Tracked Changes. Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10220 - Seamless and welded steel tubes. Dimensions and masses per unit length
- BS-EN-10224 - Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions
- BS-EN-10246-10 - Part 10: Radiographic Testing of the Weld Seam of Automaticfusion Arc Welded Steel Tu
- BS-EN-10246-11 - Part 11: Liquid Penetrant Testing of Seamless & Welded Steeltubes for the Detection Of
- BS-EN-10246-12 - Non-destructive testing of steel tubes
- BS-EN-10246-13 - Non-destructive testing of steel tubes
- BS-EN-10246-14 - Non-destructive testing of steel tubes
- BS-EN-10246-15 - Non-destructive testing of steel tubes
- BS-EN-10246-16 - Non-destructive testing of steel tubes
- BS-EN-10246-17 - Non-destructive testing of steel tubes
- BS-EN-10246-18 - Part 18: Magnetic Particle Inspection of Tube Ends of Seamless & Welded Ferromagnetic
- BS-EN-10246-2 - Non-destructive testing of steel tubes
- BS-EN-10246-3 - Non-destructive testing of steel tubes
- BS-EN-10246-4 - Non-destructive testing of steel tubes
- BS-EN-10246-5 - Non-destructive testing of steel tubes
- BS-EN-10246-6 - Non-destructive testing of steel tubes
- BS-EN-10246-7 - Non-destructive testing of steel tubes
- BS-EN-10246-8 - Non-destructive testing of steel tubes
- BS-EN-10246-9 - Non-destructive testing of steel tubes
- BS-EN-10255 - Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions
- BS-EN-10256 - Non-destructive testing on steel tubes. Qualification and competence of level 1 and level 2 non-destructive testing personnel
- BS-EN-10288 - Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings
- BS-EN-10297-1 - Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions
- BS-EN-10298 - Steel tubes and fittings for onshore and offshore pipelines. Internal lining with cement mortar
- BS-EN-10312 - Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption. Technical delivery conditions
- BS-EN-10357 - Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
- BS-EN-1123-1 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems
- BS-EN-1124-2 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems
- BS-EN-1124-3 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems
- BS-EN-1124-4 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems
- BS-EN-12007-3 - Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar
- BS-EN-12007-3-TC - Tracked Changes. Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar
- BS-EN-13941-2 - District heating pipes. Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks
- BS-EN-14525 - Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement
- BS-EN-14525-TC - Tracked Changes. Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement
- BS-EN-14628 - Ductile iron pipes, fittings and accessories. External polythene coating for pipes. Requirements and test methods
- BS-EN-14628-1 - Ductile iron pipes, fittings and accessories. Requirements and test methods
- BS-EN-14901 - Ductile iron pipes, fittings and accessories. Epoxy coating (heavy duty) of ductile iron fittings and accessories. Requirements and test methods
- BS-EN-14901-1 - Ductile iron pipes, fittings and accessories. Requirements and test methods for organic coatings of ductile iron fittings and accessories
- BS-EN-14901-2 - Ductile iron pipes, fittings and accessories. Requirements and test methods for organic coatings of ductile iron fittings and accessories
- BS-EN-15655 - Ductile iron pipes, fittings and accessories. Internal polyurethane lining for pipes and fittings. Requirements and test methods
- BS-EN-15655-1 - Ductile iron pipes, fittings and accessories. Requirements and test methods for organic linings of ductile iron pipes and fittings
- BS-EN-15655-2 - Ductile iron pipes, fittings and accessories. Requirements and test methods for organic linings of ductile iron pipes and fittings
- BS-EN-15698-1 - District heating pipes. Bonded twin pipe systems for directly buried hot water networks
- BS-EN-15698-2 - District heating pipes. Bonded twin pipe systems for directly buried hot water networks
- BS-EN-17970 - Video Surveillance Systems (VSS) for use in security applications
- BS-EN-253 - District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene
- BS-EN-545 - Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
- BS-EN-598 - Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods
- BS-EN-877 - Cast iron pipe systems and their components for the evacuation of water from works. characteristics and test methods
- BS-EN-877-TC - Tracked Changes. Cast iron pipe systems and their components for the evacuation of water from works. characteristics and test methods
- BS-EN-969 - Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods
- BS-EN-ISO-10893-1 - Non-destructive testing of steel tubes
- BS-EN-ISO-10893-2 - Non-destructive testing of steel tubes
- BS-EN-ISO-21809-2 - Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems
- BS-ISO-10803 - Design method for ductile iron pipes
- BS-ISO-13470 - Trenchless applications of ductile iron pipes systems. Product design and installation
- BS-ISO-16132 - Ductile iron pipes and fittings. Seal coats for cement mortar linings
- BS-ISO-16132-TC - Tracked Changes. Ductile iron pipes and fittings. Seal coats for cement mortar linings
- BS-ISO-16134 - Earthquake-resistant and subsidence-resistant design of ductile iron pipelines
- BS-ISO-21051 - Construction and installation of ductile iron pipeline system
- BS-ISO-21052 - Restrained joint systems for ductile iron pipelines. Calculation rules for lengths to be restrained
- BS-ISO-21809-4 - Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems
- BS-ISO-23991 - Irrigation applications of ductile iron pipelines. Product design and installation
- BS-ISO-4179 - Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
- BS-ISO-4179-TC - Tracked Changes. Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
- BS-ISO-4370 - Environmental life cycle assessment and recycling of ductile iron pipes for water applications
- BS-ISO-8179-1 - Ductile iron pipes, fittings, accessories and their joints. External zinc-based coating
- BS-ISO-8179-1-TC - Tracked Changes. Ductile iron pipes, fittings, accessories and their joints. External zinc-based coating
- BS-ISO-8179-2 - Ductile iron pipes, fittings, accessories and their joints. External zinc-based coating
- BS-ISO-8180 - Ductile iron pipelines. Polyethylene sleeving for site application
- CP-2010-2 - Code of practice for pipelines
- KIT-159 - Steel Tubes Technical Delivery Conditions Kit
- PD-8010-1 - Pipeline systems
- PD-8010-2 - Pipeline systems
- PD-8010-3 - Pipeline systems
- PD-8010-4 - Pipeline systems
- PD-CEN-15545 - Guide to the use of EN 545
- PD-CEN-16017 - Guide to the use of EN 598
- PD-CEN-16470 - Environmental aspects of ductile iron pipe systems for water and sewerage applications
- PD-CEN-16950 - Ductile iron pipes, fittings and accessories. Sanitary characteristics and test methods
- PD-CEN-17996 - Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Guidelines for Pipelines Installation
- PD-ISO-4340 - Water aggressiveness evaluation and optimized lining choice
ISO:
- ISO-10124 - Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections
- ISO-10332 - Non-destructive testing of steel tubes - Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness
- ISO-10543 - Seamless and hot-stretch-reduced welded steel tubes for pressure purposes - Full peripheral ultrasonic thickness testing
- ISO-10803 - Design method for ductile iron pipes
- ISO-10893-1 - Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
- ISO-10893-10 - Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
- ISO-10893-10-AM1 - - Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria
- ISO-10893-11 - Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
- ISO-10893-11-AM1 - - Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria
- ISO-10893-12 - Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
- ISO-10893-12-AM1 - - Amendment 1: Change of acceptance criteria
- ISO-10893-1-AM1 - - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria
- ISO-10893-2 - Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
- ISO-10893-2-AM1 - - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria
- ISO-10893-3 - Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
- ISO-10893-3-AM1 - - Amendment 1: Change of dimensions of the reference notch
- ISO-10893-3-AM2 - - Amendment 2: Change acceptance criteria
- ISO-10893-4 - Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
- ISO-10893-5 - Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
- ISO-10893-6 - Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
- ISO-10893-7 - Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
- ISO-10893-8 - Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
- ISO-10893-8-AM1 - - Amendment 1: Change acceptance criteria
- ISO-10893-9 - Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
- ISO-10893-9-AM1 - - Amendment 1: Change acceptance criteria
- ISO-1127 - Stainless steel tubes -- Dimensions, tolerances and conventional masses per unit length
- ISO-11496 - Seamless and welded steel tubes for pressure purposes - Ultrasonic testing of tube ends for the detection of laminar imperfections
- ISO-12094 - Welded steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes
- ISO-12095 - Seamless and welded steel tubes for pressure purposes - Liquid penetrant testing
- ISO-12096 - Submerged arc-welded steel tubes for pressure purposes - Radiographic testing of the weld seam for the detection of imperfections
- ISO-13 - Grey iron pipes, special castings and grey iron parts for pressure main lines
- ISO-13470 - Trenchless applications of ductile iron pipes systems - Product design and installation
- ISO-1355 - Metallic materials -- Hardness test -- Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)
- ISO-13663 - Welded steel tubes for pressure purposes - Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections
- ISO-13664 - Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for the detection of laminar imperfections
- ISO-13665 - Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections
- ISO-16132 - Ductile iron pipes and fittings - Seal coats for cement mortar linings
- ISO-16134 - Earthquake-resistant and subsidence-resistant design of ductile iron pipelines
- ISO-18468 - Ductile iron fittings, accessories and their joints and valves - Epoxy coating
- ISO-21051 - Construction and installation of ductile iron pipeline system
- ISO-21052 - Restrained joint systems for ductile iron pipelines - Calculation rules for lengths to be restrained
- ISO-23991 - Irrigation applications of ductile iron pipelines - Product design and installation
- ISO-24131-1 - Internal protection by polymeric lining for ductile iron pipes - Requirements and test methods - Part 1: Polyurethane lining
- ISO-24131-2 - Internal protection by polymeric lining for ductile iron pipes - Requirements and test methods - Part 2: Epoxy lining
- ISO-3304 - Plain end seamless precision steel tubes -- Technical conditions for delivery
- ISO-3305 - Plain end welded precision steel tubes -- Technical conditions for delivery
- ISO-3306 - Plain end as-welded and sized precision steel tubes -- Technical conditions for delivery
- ISO-3545-1 - Steel tubes and fittings -- Symbols for use in specifications -- Part 1: Tubes and tubular accessories with circular cross-section
- ISO-3545-2 - Steel tubes and fittings -- Symbols for use in specifications -- Part 2: Square and rectangular hollow sections
- ISO-4179 - Ductile iron pipes and fittings for pressure and non-pressure pipelines - Cement mortar lining
- ISO-4200 - Plain end steel tubes, welded and seamless -- General tables of dimensions and masses per unit length
- ISO-4340 - Water aggressiveness evaluation and optimized lining choice
- ISO-4370 - Environmental life cycle assessment and recycling of ductile iron pipes for water applications
- ISO-5252 - Steel tubes -- Tolerance systems
- ISO-5256 - Steel pipes and fittings for buried or submerged pipe lines -- External and internal coating by bitumen or coal tar derived materials
- ISO-65 - Carbon steel tubes suitable for screwing in accordance with ISO 7-1
- ISO-6761 - Steel tubes -- Preparation of ends of tubes and fittings for welding
- ISO-7035-2 - Design and asset management of DIP for water application - Part 2: Design, installation and operation
- ISO-7598 - Stainless steel tubes suitable for screwing in accordance with ISO 7-1
- ISO-8179-1 - Ductile iron pipes, fittings, accessories and their joints - External zinc-based coating - Part 1: Metallic zinc with finishing layer
- ISO-8179-2 - Ductile iron pipes, fittings, accessories and their joints - External zinc-based coating - Part 2: Zinc-rich paint
- ISO-8180 - Ductile iron pipelines - Polyethylene sleeving for site application
- ISO-9095 - Steel tubes - Continuous character marking and colour coding for material identification
- ISO-9302 - Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Electromagnetic testing for verification of hydraulic leak-tightness
- ISO-9303 - Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Full peripheral ultrasonic testing for the detection of longitudinal imperfections
- ISO-9304 - Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Eddy current testing for the detection of imperfections
- ISO-9305 - Seamless steel tubes for pressure purposes - Full peripheral ultrasonic testing for the detection of transverse imperfections
- ISO-9329-1 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Unalloyed steels with specified room temperature properties
- ISO-9329-2 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Unalloyed and alloyed steels with specified elevated temperature properties
- ISO-9329-3 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Unalloyed and alloyed steels with specified low temperature properties
- ISO-9329-4 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels
- ISO-9330-1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Unalloyed steel tubes with specified room temperature properties
- ISO-9330-2 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties
- ISO-9330-3 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
- ISO-9330-4 - Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties
- ISO-9330-5 - Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties
- ISO-9330-6 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes
- ISO-9402 - Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
- ISO-9598 - Seamless steel tubes for pressure purposes - Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
- ISO-9764 - Electric resistance and induction welded steel tubes for pressure purposes - Ultrasonic testing of the weld seam for the detection of longitudinal imperfections
- ISO-9765 - Submerged arc-welded steel tubes for pressure purposes - Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
Other SDOs:
- DIN-2430-1 - Part 1: Pipes & Elbows, Piping for Pigging Systems
- DIN-2460 - Steel Water Pipes & Fittings
- DIN-4935-1 - Part 1: Sizes DN 40 To DN 100 Threaded Screens With Continuos Slot, Stainless Steel Wi
- DIN-4935-2 - Part 2: Sizes DN 100 To DN 500 Threaded Screen With Continuos Slot, Stainless Steel Wi
- DIN-4935-3 - Part 3: Sizes DN 500 To DN 1 000 Flanged Screens With Continuous Slot, Stainless Steel
- DIN-EN-10216-1 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2013
- DIN-EN-10216-2 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2013
- DIN-EN-10216-3 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10216-3:2013
- DIN-EN-10216-4 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties; German version EN 10216-4:2013
- DIN-EN-10216-5 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes; German version EN 10216-5:2013
- DIN-EN-10217-1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10217-1:2002 + A1:2005
- DIN-EN-10217-2 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-2:2002 + A1:2005
- DIN-EN-10217-3 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10217-3:2002 + A1:2005
- DIN-EN-10217-4 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-4:2002 + A1:2005
- DIN-EN-10217-5 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-5:2002 + A1:2005
- DIN-EN-10217-6 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-6:2002 + A1:2005
- DIN-EN-10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes; German version EN 10217-7:2014
- DIN-EN-10224 - Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10224:2002 + A1:2005
- DIN-EN-10246-7 - Part 7: Automatic Full Peripheral Ultrasonic Testing of Seamless and Welded (Except Subm
- DIN-EN-10255 - Non-Alloy Steel Tubes Suitable for Welding & Threading
- DIN-EN-10288 - Steel tubes and fittings for on and offshore pipelines - External two layer extruded polyethylene based coatings
- DIN-EN-10298 - Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar; German version EN 10298:2005
- DIN-EN-10312 - Welded Stainless Steel Tubes for the Conveyance of Water & Other Aqueous Liquids - Tec
- DIN-EN-1123-3 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building; German version EN 1123-3:2004
- DIN-EN-1124-4 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships; German version EN 1124-4:2013
- DIN-EN-14525 - Ductile Iron Wide Tolerance Coulings & Flange Adaptors for Use With Pipes of Different
- DIN-EN-14628 - Ductile Iron Pipes, Fittings & Accessories - External Polyethylene Coating for Pipes -
- DIN-EN-14901 - Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods; German version EN 14901:2014
- DIN-EN-15189 - Ductile Iron Pipes, Fittings & Accessories - External Polyurethane Coating for Pipes -
- DIN-EN-253 - District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene; German version EN 253:2009+A2:2015
- DIN-EN-253/A2 - District Heating Pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene; German version EN 253:2003/A2:2006
- DIN-EN-545 - Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
- DIN-EN-877/A1 - Cast Iron Pipes & Fittings, Their Joints & Accessories for the Evacuation of Water Fro
- EN-10208-1 - Part 1: Pipes of Requirement Class a, Steel Pipes for Pipelines for Combustible Fluids
- EN-10208-2 - Part 2: Pipes of Requirement Class B, Steel Pipes for Pipelines for Combustible Fluids
- EN-10216-1 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
- EN-10216-2 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
- EN-10216-3 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
- EN-10216-4 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
- EN-10216-5 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
- EN-10217-1 - Part 1: Non-Alloy Steel Tubes With Specified Room Temperature Properties, Welded Steel
- EN-10217-2 - Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
- EN-10217-3 - Part 3: Alloy Fine Grain Steel Tubes, Welded Steel Tubes Forpressure Purposes - Techni
- EN-10217-4 - Part 4: Electric Welded Non-Alloy Steel Tubes With Specified Low Temperature Propertie
- EN-10217-5 - Part 5: Submerged Arc Welded Non-Alloy & Alloy Steel Tubes With Specified Elevated Tem
- EN-10217-6 - Part 6: Submerged Arc Welded Non-Alloy Steel Tubes With Specified Low Temperature Prop
- EN-10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
- EN-10224 - Non-Alloy Steel Tubes & Fittings for the Conveyance of Water & Aqueous Liquids, Techni
- EN-10246-7 - Part 7: Automatic Full Peripheral Ultrasonic Testing of Seamless & Welded (Except Subm
- EN-10255 - Non-Alloy Steel Tubes Suitable for Welding & Threading, Technical Delivery Conditions
- EN-10288 - Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
- EN-10298 - Steel Tubes & Fittings for on Shore & Offshore Pipelines - Internal Lining With Cement
- EN-10312 - Welded Stainless Steel Tubes for the Conveyance of Water & Other Aqueous Liquids - Tec
- EN-10357 - Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
- EN-1123-2 - Part 2: Dimensions, Pipes & Fittings of Longitudinally Welded Hot-Dip Galvanized Steel
- EN-1123-3 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
- EN-1124-2 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
- EN-1124-3 - Part 3: System X - Dimensions, Pipes & Fittings of Longitudinally Welded Stainless Ste
- EN-1124-4 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships
- EN-12007-3 - Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel
- EN-13941-1 - District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 1: Design
- EN-13941-2 - District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 2: Installation
- EN-14525 - Ductile Iron Wide Tolerance Coulings & Flange Adaptors for Use With Pipes of Different
- EN-14628 - Ductile Iron Pipes, Fittings & Accessories - External Polyethylene Coating for Pipes -
- EN-14901 - Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods
- EN-15655 - Ductile Iron Pipes, Fittings & Accessories - Internal Polyurethane Lining for Pipes &
- EN-15655-1 - Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings
- EN-15698-1 - Part 1: Twin Pipe Assembly of Steel Service Pipe, Polyurethane Thermal Insulation & Ou
- EN-15698-2 - District heating pipes - Preinsulated bonded twin pipe systems for directly buried hot water networks - Part 2: Fitting and valve assembly of steel service pipes, polyurethane thermal insulation and outer casing of
- EN-253 - District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
- EN-253/A2 - District Heating Pipes - Preinsulated Bonded Pipe Systems for Directly Buried Hot Wate
- EN-545 - Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
- EN-598 - Ductile Iron Pipes, Fittings, Accessories & Their Joints for Sewerage Applications - R
- EN-877 - Cast Iron Pipes & Fittings, Their Joints & Accessories for the Evacuation of Water Fro
- EN-877/A1 - Cast Iron Pipes and Fittings, Their Joints and Accessories for the Evacuation of Water Fro
- EN-969 - Ductile Iron Pipes, Fittings, Accessories & Their Joints for Gas Pipelines - Requireme
- EN-ISO-10893-1 - Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
- EN-ISO-10893-10 - Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
- EN-ISO-10893-11 - Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
- EN-ISO-10893-12 - Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
- EN-ISO-10893-2 - Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
- EN-ISO-21809-2 - Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings
- JIS-A-5314 - Mortar lining for ductile iron pipes
- JIS-G-0431 - Steel products -- Employer's qualification system for non-destructive testing (NDT) personnel
- JIS-G-0582 - Automated ultrasonic examination of steel pipes and tubes
- JIS-G-0583 - Automated eddy current examination of steel pipes and tubes
- JIS-G-0584 - Ultrasonic examination for arc welded steel pipes
- JIS-G-3447 - Stainless steel sanitary pipes
- JIS-G-3447-AM1 - Stainless steel sanitary pipes (Amendment 1)
- JIS-G-3447 JAPANESE - Japanese Language - STAINLESS STEEL SANITARY PIPES
- JIS-G-3448 - Light gauge stainless steel tubes for ordinary piping
- JIS-G-3457 - Arc welded carbon steel pipes
- JIS-G-3461 - Carbon steel boiler and heat exchanger tubes
- JIS-G-3461-AM1 - Carbon steel boiler and heat exchanger tubes (Amendment 1)
- JIS-G-3462 - Alloy steel tubes for boiler and heat exchanger
- JIS-G-3462-AM1 - Alloy steel tubes for boiler and heat exchanger (Amendment 1)
- JIS-G-3468 - Large diameter welded stainless steel pipes
- JIS-G-3470 - Corrugated steel section
- SIS-EN-10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
- SS-EN-10208-1 - Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A
- SS-EN-10208-2 - Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
- SS-EN-10216-1 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
- SS-EN-10216-2 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
- SS-EN-10216-3 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
- SS-EN-10216-4 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
- SS-EN-10216-5 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
- SS-EN-10217-1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
- SS-EN-10217-1-AM1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
- SS-EN-10217-2 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
- SS-EN-10217-2-AM1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
- SS-EN-10217-3 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
- SS-EN-10217-3-AM1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
- SS-EN-10217-4 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
- SS-EN-10217-4-AM1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
- SS-EN-10217-5 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
- SS-EN-10217-5-AM1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
- SS-EN-10217-6 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
- SS-EN-10217-6-AM1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
- SS-EN-10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
- SS-EN-10224 - Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
- SS-EN-10224-AM1 - Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions
- SS-EN-10240 - Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanizedcoatings
- SS-EN-10246-1 - Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagneticsteel tubes for verification of hydraulic leak- tightness
- SS-EN-10246-10 - Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
- SS-EN-10246-11 - Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections
- SS-EN-10246-12 - Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
- SS-EN-10246-13 - Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes
- SS-EN-10246-14 - Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections
- SS-EN-10246-15 - Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
- SS-EN-10246-16 - Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
- SS-EN-10246-17 - Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections
- SS-EN-10246-18 - Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections
- SS-EN-10246-2 - Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leaktightness
- SS-EN-10246-3 - Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
- SS-EN-10246-4 - Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections
- SS-EN-10246-5 - Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections
- SS-EN-10246-6 - Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
- SS-EN-10246-7 - Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections
- SS-EN-10246-8 - Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
- SS-EN-10246-9 - Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
- SS-EN-10255 - Non-alloy steel tubes suitable for welding or threading - Technical delivery conditions
- SS-EN-10256 - Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel
- SS-EN-10284 - Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
- SS-EN-10288 - Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
- SS-EN-10298 - Steel tubes and fittings for on shore and offshore pipelines - Internal lining with cement mortar
- SS-EN-10305-1 - Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
- SS-EN-10305-2 - Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
- SS-EN-10305-3 - Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
- SS-EN-10305-4 - Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
- SS-EN-10305-5 - Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
- SS-EN-10312 - Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
- SS-EN-10312-AM1 - Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions
- SS-EN-10357 - Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
- SS-EN-1123-1 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
- SS-EN-1123-1-AM1 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
- SS-EN-1123-2 - Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions
- SS-EN-1123-3 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
- SS-EN-1124-1 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
- SS-EN-1124-1-AM1 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
- SS-EN-1124-2 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
- SS-EN-1124-3 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
- SS-EN-1124-4 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships
- SS-EN-12007-3 - Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel
- SS-EN-13229 - Inset appliances including open fires by solid fuels - Requirements and test methods
- SS-EN-13941 - Design and installation of preinsulated bonded pipe systems for district heating
- SS-EN-13941-1 - District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 1: Design
- SS-EN-13941-2 - District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 2: Installation
- SS-EN-14350 - Child care articles - Drinking equipment - Safety requirements and test methods
- SS-EN-14419 - District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Surveillance systems
- SS-EN-14525 - Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement
- SS-EN-14628 - Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods
- SS-EN-14628-1 - Ductile iron pipes, fittings and accessories - Requirements and test methods - Part 1: PE coatings
- SS-EN-14901 - Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods
- SS-EN-14901-1 - Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
- SS-EN-14901-2 - Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
- SS-EN-15030 - Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent use
- SS-EN-15632-1 - District heating pipes - Factory made flexible pipe systems - Part 1: Classification, general requirements and test methods
- SS-EN-15632-4 - District heating pipes - Factory made flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods
- SS-EN-15655 - Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods
- SS-EN-15655-1 - Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings
- SS-EN-15655-2 - Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
- SS-EN-15698-1 - District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
- SS-EN-15698-2 - District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
- SS-EN-253 - District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene
- SS-EN-253-AM1 - District Heating Pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
- SS-EN-253-AM2 - District Heating Pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
- SS-EN-489 - District heating pipes - Preinsulated bonded pipe systems for direcly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
- SS-EN-489-1 - District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Part 1: Joint casing assemblies and thermal insulation for hot water networks in accordance with EN 13941-1
- SS-EN-545 - Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
- SS-EN-598 - Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
- SS-EN-640 - Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
- SS-EN-641 - Reinforced concrete pressure pipes, cylinder type, including joints and fittings
- SS-EN-877 - Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
- SS-EN-877-AM1 - Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance
- SS-EN-969 - Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
- SS-EN-969-AM1 - Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements and test methods
- SS-EN-ISO-10893-1 - Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011)
- SS-EN-ISO-10893-10 - Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011)
- SS-EN-ISO-10893-10-AM1 - Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
- SS-EN-ISO-10893-11 - Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011)
- SS-EN-ISO-10893-11-AM1 - Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
- SS-EN-ISO-10893-12 - Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011)
- SS-EN-ISO-10893-12-AM1 - Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)
- SS-EN-ISO-10893-1-AM1 - Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
- SS-EN-ISO-10893-2 - Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011)
- SS-EN-ISO-10893-2-AM1 - Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
- SS-EN-ISO-10893-3 - Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011)
- SS-EN-ISO-10893-3-AM1 - Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
- SS-EN-ISO-10893-3-AM2 - Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
- SS-EN-ISO-10893-4 - Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011)
- SS-EN-ISO-10893-5 - Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011)
- SS-EN-ISO-10893-6 - Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019)
- SS-EN-ISO-10893-7 - Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019)
- SS-EN-ISO-10893-8 - Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011)
- SS-EN-ISO-10893-8-AM1 - Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
- SS-EN-ISO-10893-9 - Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011)
- SS-EN-ISO-10893-9-AM1 - Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
- SS-EN-ISO-1127 - Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
- SS-EN-ISO-3183 - Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO 3183:2019)
- SS-EN-ISO-3183-AM1 - Petroleum and natural gas industries - Steel pipe for pipeline transportation systems - Amendment 1 (ISO 3183:2012/Amd 1:2017)
- SS-ENV-10220 - Seamless and welded steel tubes - Dimensions and massses per unit length
- SS-ISO-7487-3 - Information processing - Data interchange on 130 mm flexible disk cartidiges using modified frequency modulation recording at 7958 ftprad, 1,9 tpmm, on two sides - Part 3: Track format B. Technical Corrigendum 1
- UNE-EN-10216-5 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
- UNE-EN-10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes