Document Center

Document Center List of Standards on Liquid Fuels Including Gasoline, Diesel, Kerosene, Etc.

ICS Code 75.160.20

Return to ICS Index.

Up to Level 2:

• 75.160 (Fuels)

The following documents are a part of this series:

ASTM:

• ASTM-D1094 - Standard Test Method for Water Reaction of Aviation Fuels
• ASTM-D1318 - Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
• ASTM-D1322 - Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
• ASTM-D1405 - Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels (Withdrawn 2019)
• ASTM-D1655 - Standard Specification for Aviation Turbine Fuels
• ASTM-D1660 - Method of Test for Thermal Stability of Aviation Turbine Fuels (Withdrawn 1992)
• ASTM-D1661 - Method of Test for Thermal Stability of U.S. Navy Special Fuel Oil (Withdrawn 1988)
• ASTM-D1740 - Standard Test Method for Luminometer Numbers of Aviation Turbine Fuels (Withdrawn 2006)
• ASTM-D1796 - Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
• ASTM-D1839 - Standard Test Method for Amyl Nitrate in Diesel Fuels (Withdrawn 2019)
• ASTM-D1840 - Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
• ASTM-D187 - Standard Test Method for Burning Quality of Kerosene
• ASTM-D1949 - Test Method for Separation of Tetraethyllead and Tetramethyllead in Gasoline (Withdrawn 1990)
• ASTM-D2001 - Standard Test Method for Depentanization of Gasoline and Naphthas
• ASTM-D2002 - Standard Test Method for Isolation of Representative Saturates Fraction from Low-Olefinic Petroluem Naphthas (Withdrawn 1998)
• ASTM-D2003 - Test Method for Isolation of Representative Saturates Fraction from High-Olefinic Petroleum Naphthas (Withdrawn 1998)
• ASTM-D2068 - Standard Test Method for Determining Filter Blocking Tendency
• ASTM-D2069 - Standard Specification for Marine Fuels (Withdrawn 2003)
• ASTM-D2156 - Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
• ASTM-D2157 - Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels
• ASTM-D2159 - Standard Test Method for Naphthenes in Saturates Fractions by Refractivity Intercept (Withdrawn 1998)
• ASTM-D2267 - Test Method for Aromatics in Light Naphthas, and Aviation Gasolines by Gas Chromatography (Withdrawn 1992)
• ASTM-D2274 - Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
• ASTM-D2276 - Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
• ASTM-D235 - Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) (Withdrawn 2021)
• ASTM-D2386 - Standard Test Method for Freezing Point of Aviation Fuels
• ASTM-D2389 - Standard Test Method for Minimum Pressure for Vapor Phase Ignition of Monopropellents (Withdrawn 2003)
• ASTM-D2392 - Standard Test Method for Color of Dyed Aviation Gasolines
• ASTM-D240 - Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
• ASTM-D2427 - Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography
• ASTM-D2503 - Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure (Withdrawn 2022)
• ASTM-D2539 - Standard Test Method for Shock Sensitivity of Liquid Monopropellants by the Card-Gap Test
• ASTM-D2540 - Standard Test Method for Drop-Weight Sensitivity of Liquid Monopropellants (Withdrawn 2003)
• ASTM-D2541 - Standard Test Method for Critical Diameter and Detonation Velocity of Liquid Monopropellants (Withdrawn 2003)
• ASTM-D2599 - Methods of Test for Lead in Gasoline by X-Ray Spectrometry (Withdrawn 1992)
• ASTM-D2600 - Test Method for Aromatic Traces in Light Saturated Hydrocarbons by Gas Chromatography (Withdrawn 1992)
• ASTM-D2624 - Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
• ASTM-D2699 - Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
• ASTM-D2700 - Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
• ASTM-D2709 - Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
• ASTM-D2781 - Method of Test for Compatibility of Fuel Oil Blends by Spot Test (Withdrawn 1991)
• ASTM-D2786 - Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry (Withdrawn 2023)
• ASTM-D2789 - Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry (Withdrawn 2023)
• ASTM-D2880 - Standard Specification for Gas Turbine Fuel Oils
• ASTM-D2884 - Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method (Withdrawn 2017)
• ASTM-D2885 - Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
• ASTM-D2889 - Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
• ASTM-D3117 - Standard Test Method for Wax Appearance Point of Distillate Fuels (Withdrawn 2010)
• ASTM-D322 - Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation (Withdrawn 2022)
• ASTM-D3227 - Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
• ASTM-D3228 - Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
• ASTM-D3229 - Low Levels of Lead in Gasoline by Wavelength Dispersive X-Ray Spectrometry, Standard Test
• ASTM-D3231 - Standard Test Method for Phosphorus in Gasoline
• ASTM-D3237 - Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
• ASTM-D3240 - Standard Test Method for Undissolved Water In Aviation Turbine Fuels
• ASTM-D3241 - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
• ASTM-D3242 - Standard Test Method for Acidity in Aviation Turbine Fuel
• ASTM-D3245 - Standard Test Method for Pumpability of Industrial Fuel Oils (Withdrawn 2010)
• ASTM-D3338 - Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
• ASTM-D3341 - Standard Test Method for Lead in Gasoline—Iodine Monochloride Method (Withdrawn 2022)
• ASTM-D3343 - Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
• ASTM-D3348 - Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method) (Withdrawn 2022)
• ASTM-D3602 - Test Method for Water Separation Characteristics of Aviation Turbine Fuels (Withdrawn 1994)
• ASTM-D3605 - Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
• ASTM-D3606 - Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography
• ASTM-D3699 - Standard Specification for Kerosine
• ASTM-D3701 - Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
• ASTM-D3703 - Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels
• ASTM-D3710 - Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography
• ASTM-D381 - Standard Test Method for Gum Content in Fuels by Jet Evaporation
• ASTM-D3831 - Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
• ASTM-D3948 - Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
• ASTM-D396 - Standard Specification for Fuel Oils
• ASTM-D4046 - Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry (Withdrawn 2019)
• ASTM-D4053 - Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy (Withdrawn 2013)
• ASTM-D4054 - Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives
• ASTM-D4171 - Standard Specification for Fuel System Icing Inhibitors
• ASTM-D4176 - Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
• ASTM-D4305 - Standard Test Method for Filter Flow of Aviation Fuels at Low Temperatures (Withdrawn 2010)
• ASTM-D4306 - Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
• ASTM-D439 - Specification for Automotive Gasoline (Withdrawn 1990)
• ASTM-D4418 - Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
• ASTM-D4420 - Standard Test Method for Determination of Aromatics in Finished Gasoline by Gas Chromatography (Withdrawn 2004)
• ASTM-D4484 - Test Method for Inorganic Particles in Marine Residual Fuel Oils by Selective Centrifugal Separation (Withdrawn 1993)
• ASTM-D4529 - Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
• ASTM-D4539 - Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
• ASTM-D4682 - Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants
• ASTM-D473 - Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
• ASTM-D4737 - Standard Test Method for Calculated Cetane Index by Four Variable Equation
• ASTM-D4740 - Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
• ASTM-D480 - Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
• ASTM-D4806 - Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
• ASTM-D4808 - Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
• ASTM-D4809 - Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
• ASTM-D4814 - Standard Specification for Automotive Spark-Ignition Engine Fuel
• ASTM-D4815 - Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
• ASTM-D4816 - Standard Test Method for Specific Heat of Aircraft Turbine Fuels by Thermal Analysis (Withdrawn 1999)
• ASTM-D4860 - Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
• ASTM-D4868 - Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
• ASTM-D4870 - Standard Test Method for Determination of Total Sediment in Residual Fuels
• ASTM-D4952 - Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
• ASTM-D4953 - Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
• ASTM-D5001 - Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
• ASTM-D5006 - Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
• ASTM-D5059 - Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy
• ASTM-D5148 - Standard Test Method for Centrifuge Kerosine Equivalent (Withdrawn 2018)
• ASTM-D5184 - Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
• ASTM-D5186 - Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels By Supercritical Fluid Chromatography
• ASTM-D5188 - Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)
• ASTM-D5189 - Test Method for Temperature Corresponding to Vapor-Liquid Ratio of 20 for Gasoline and Gasoline-Oxgenate Blends (Bomb Method) (Withdrawn 1993)
• ASTM-D525 - Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
• ASTM-D5452 - Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
• ASTM-D5500 - Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
• ASTM-D5501 - Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20 % Ethanol by Gas Chromatography
• ASTM-D5580 - Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
• ASTM-D5598 - Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
• ASTM-D5599 - Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
• ASTM-D5622 - Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
• ASTM-D5623 - Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
• ASTM-D5705 - Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
• ASTM-D5708 - Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
• ASTM-D5769 - Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
• ASTM-D5771 - Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
• ASTM-D5773 - Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
• ASTM-D5797 - Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines
• ASTM-D5798 - Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
• ASTM-D5839 - Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
• ASTM-D5842 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
• ASTM-D5845 - Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
• ASTM-D5901 - Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) (Withdrawn 2010)
• ASTM-D5972 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
• ASTM-D5983 - Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Blending With Gasolines for Use as Automotive Spark-Ignition Engine Fuel
• ASTM-D6079 - Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
• ASTM-D613 - Standard Test Method for Cetane Number of Diesel Fuel Oil
• ASTM-D6201 - Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
• ASTM-D6217 - Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
• ASTM-D6227 - Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
• ASTM-D6258 - Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
• ASTM-D6277 - Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
• ASTM-D6278 - Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus
• ASTM-D6296 - Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography
• ASTM-D6334 - Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence (Withdrawn 2022)
• ASTM-D6371 - Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
• ASTM-D6379 - Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
• ASTM-D6424 - Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines
• ASTM-D6446 - Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels (Withdrawn 2012)
• ASTM-D6584 - Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
• ASTM-D6623 - Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by High Resolution Gas Chromatography
• ASTM-D6728 - Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
• ASTM-D6729 - Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
• ASTM-D6730 - Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
• ASTM-D6732 - Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
• ASTM-D6733 - Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
• ASTM-D6748 - Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
• ASTM-D6751 - Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
• ASTM-D6793 - Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus (Withdrawn 2021)
• ASTM-D6812 - Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines
• ASTM-D6898 - Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig (Withdrawn 2021)
• ASTM-D6971 - Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
• ASTM-D6974 - Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
• ASTM-D6985 - Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications (Withdrawn 2010)
• ASTM-D6986 - Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
• ASTM-D7011 - Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
• ASTM-D7039 - Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
• ASTM-D7041 - Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection
• ASTM-D7058 - Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
• ASTM-D7060 - Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
• ASTM-D7096 - Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
• ASTM-D7111 - Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
• ASTM-D7112 - Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
• ASTM-D7153 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
• ASTM-D7154 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
• ASTM-D7170 - Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method (Withdrawn 2019)
• ASTM-D7185 - Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene
• ASTM-D7212 - Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
• ASTM-D7215 - Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
• ASTM-D7220 - Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
• ASTM-D7223 - Standard Specification for Aviation Certification Turbine Fuel
• ASTM-D7224 - Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
• ASTM-D7236 - Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
• ASTM-D7261 - Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
• ASTM-D7318 - Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
• ASTM-D7319 - Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
• ASTM-D7321 - Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
• ASTM-D7328 - Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
• ASTM-D7347 - Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography
• ASTM-D7371 - Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
• ASTM-D7398 - Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
• ASTM-D7418 - Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
• ASTM-D7422 - Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
• ASTM-D7451 - Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark-Ignition Engine Fuels
• ASTM-D7462 - Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method) (Withdrawn 2016)
• ASTM-D7463 - Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
• ASTM-D7464 - Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
• ASTM-D7467 - Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
• ASTM-D7484 - Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
• ASTM-D7501 - Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel Fuel Blendstock (B100) by Cold Soak Filtration Test (CSFT)
• ASTM-D7524 - Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method
• ASTM-D7525 - Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)
• ASTM-D7544 - Standard Specification for Pyrolysis Liquid Biofuel
• ASTM-D7545 - Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
• ASTM-D7547 - Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
• ASTM-D7548 - Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
• ASTM-D7566 - Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
• ASTM-D7576 - Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography (Withdrawn 2022)
• ASTM-D7577 - Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
• ASTM-D7591 - Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
• ASTM-D7592 - Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel (Withdrawn 2016)
• ASTM-D7593 - Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
• ASTM-D7618 - Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
• ASTM-D7619 - Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
• ASTM-D7620 - Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
• ASTM-D7621 - Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
• ASTM-D7624 - Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
• ASTM-D7667 - Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
• ASTM-D7668 - Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
• ASTM-D7671 - Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method
• ASTM-D7687 - Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
• ASTM-D7688 - Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
• ASTM-D7689 - Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)
• ASTM-D7717 - Standard Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis
• ASTM-D7719 - Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline
• ASTM-D7739 - Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
• ASTM-D7740 - Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
• ASTM-D7753 - Standard Test Method for Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography
• ASTM-D7754 - Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
• ASTM-D7757 - Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
• ASTM-D7794 - Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines
• ASTM-D7795 - Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
• ASTM-D7796 - Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography
• ASTM-D7797 - Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
• ASTM-D7806 - Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
• ASTM-D7821 - Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)
• ASTM-D7826 - Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
• ASTM-D7844 - Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
• ASTM-D7845 - Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry
• ASTM-D7861 - Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
• ASTM-D7862 - Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel
• ASTM-D7872 - Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
• ASTM-D7875 - Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
• ASTM-D7901 - Standard Specification for Dimethyl Ether for Fuel Purposes
• ASTM-D7920 - Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography
• ASTM-D7923 - Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
• ASTM-D7960 - Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components
• ASTM-D7963 - Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
• ASTM-D7974 - Standard Test Method for Determination of Farnesane, Saturated Hydrocarbons, and Hexahydrofarnesol Content of Synthesized Iso-Paraffins (SIP) Fuel for Blending with Jet Fuel by Gas Chromatography
• ASTM-D7978 - Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method
• ASTM-D8011 - Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol
• ASTM-D8049 - Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
• ASTM-D8070 - Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
• ASTM-D8071 - Standard Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
• ASTM-D8073 - Standard Test Method for Determination of Water Separation Characteristics of Aviation Turbine Fuel by Small Scale Water Separation Instrument
• ASTM-D8076 - Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
• ASTM-D8110 - Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
• ASTM-D8144 - Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography
• ASTM-D8147 - Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines
• ASTM-D8148 - Standard Test Method for Spectroscopic Determination of Haze in Fuels
• ASTM-D8166 - Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Particle Contamination Monitors
• ASTM-D8181 - Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils
• ASTM-D8183 - Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
• ASTM-D8194 - Standard Practice for Evaluation of Suitability of 37 mm Filter Monitors and 47 mm Filters Used to Determine Particulate Contaminant in Aviation Turbine Fuels
• ASTM-D8235 - Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
• ASTM-D873 - Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
• ASTM-D909 - Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
• ASTM-D910 - Standard Specification for Leaded Aviation Gasolines
• ASTM-D93 - Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
• ASTM-D936 - Method of Test for Aromatic Hydrocarbons in Olefin-Free Gasolines by Silica Gel Absorption (Withdrawn 1990)
• ASTM-D975 - Standard Specification for Diesel Fuel Oils
• ASTM-D976 - Standard Test Method for Calculated Cetane Index of Distillate Fuels
• ASTM-E1117 - Standard Practice for Design of Fuel-Alcohol Manufacturing Facilities (Withdrawn 2009)
• ASTM-E1259 - Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390 °C
• ASTM-E3050 - Standard Specification for Denatured Ethanol for Use as Cooking and Appliance Fuel
• ASTM-ES19 - Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration (Withdrawn 1994)
• ASTM-F309 - Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
• ASTM-F3344 - Standard Guide for Storage, Use, and Handling of Liquid Rocket Propellants
• ASTM-F764 - Standard Practice for Compatibility of Materials with High-Energy Propellants (Impact Sensitivity Threshold Technique) (Withdrawn 2003)

BSI:

• BS-2000-10 - Methods of test for petroleum and its products
• BS-2000-107 - Methods of test for petroleum and its products
• BS-2000-138 - Methods of test for petroleum and its products
• BS-2000-342 - Methods of test for petroleum and its products. Determination of thiol (mercaptan) sulfur in light and middle distillate fuels. Potentiometric method
• BS-2000-377 - Methods of test for petroleum and its products. Petroleum products. Determination of aluminium and silicon in fuel oils. Inductively coupled plasma emission and atomic absorption spectroscopy methods
• BS-2000-381 - Methods of test for petroleum and its products. Aviation fuels. Estimation of net specific energy
• BS-2000-413 - Methods of test for petroleum and its products. Petroleum products. Low levels of vanadium in liquid fuels. Determination by flameless atomic absorption spectrometry after ashing
• BS-2000-456 - Methods of test for petroleum and its products
• BS-2869 - Fuel oils for agricultural, domestic and industrial engines and boilers. Specification
• BS-4040 - Specification for leaded petrol (gasoline) for motor vehicles
• BS-6188 - Method for determination of cold filter plugging point of diesel and domestic heating fuels
• BS-6380 - Guide to low temperature properties and cold weather use of diesel fuels and gas oils
• BS-6843-1 - Marine Fuels
• BS-7800 - Automotive fuel. High octane (super) unleaded petrol. Specification
• BS-EN-116 - Diesel and domestic heating fuels. Determination of cold filter plugging point. Stepwise cooling bath method
• BS-EN-12177 - Liquid petroleum products. Unleaded petrol. Determination of benzene content by gas chromatography
• BS-EN-12177-TC - Tracked Changes. Liquid petroleum products. Unleaded petrol. Determination of benzene content by gas chromatography
• BS-EN-12662 - Liquid petroleum products. Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
• BS-EN-13016-1 - Liquid petroleum products. Vapour pressure
• BS-EN-13016-2 - Liquid petroleum products. Vapour pressure
• BS-EN-13016-3 - Liquid petroleum products. Vapour pressure
• BS-EN-13132 - Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching
• BS-EN-13723 - Methods of test for petroleum and its products. Petroleum products. Determination of low lead contents in gasolines. Wavelength-dispersive X-ray fluorescence spectrometry (XRF)
• BS-EN-14078 - Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in middle distillates. Infrared spectrometry method
• BS-EN-14156 - Derivatives from coal pyrolysis. Coal tar based oils. Coal tar fuel. Specifications and test methods
• BS-EN-14213 - Heating fuels. Fatty acid methyl esters (FAME). Requirements and test methods
• BS-EN-14214 - Liquid petroleum products. Fatty acid methyl esters (FAME) for use in diesel engines and heating applications. Requirements and test methods
• BS-EN-14274 - Automotive fuels. Assessment of petrol and diesel quality. Fuel quality monitoring system (FQMS)
• BS-EN-14275 - Automotive fuels. Assessment of petrol and diesel fuel quality. Sampling from retail site pumps and commercial site fuel dispensers
• BS-EN-14517 - Methods of Test for Petroleum and Its Products, Bs 2000-526: Liquid Petroleum Products,
• BS-EN-14998 - Derivatives from coal pyrolysis. Coal tar based oils: fluxings oils. Specifications and test methods
• BS-EN-15195 - Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
• BS-EN-15293 - Automotive fuels. Automotive ethanol (E85) fuel. Requirements and test methods
• BS-EN-15293-TC - Tracked Changes. Automotive fuels. Automotive ethanol (E85) fuel. Requirements and test methods
• BS-EN-15376 - Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods
• BS-EN-15470-TC - Tracked Changes. Liquefied petroleum gases. Determination of dissolved residues. High temperature Gas chromatographic method
• BS-EN-15471-TC - Tracked Changes. Liquefied petroleum gases. Determination of dissolved residues. High-temperature gravimetric method
• BS-EN-15492 - Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method
• BS-EN-15691 - Ethanol as a blending component for petrol. Determination of total dry residue (involatile material). Gravimetric method
• BS-EN-15692 - Ethanol as a blending component for gasoline. Determination of water content. Karl Fischer potentiometric titration method
• BS-EN-15692-TC - Tracked Changes. Ethanol as a blending component for gasoline. Determination of water content. Karl Fischer potentiometric titration method
• BS-EN-15721 - Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and other impurities. Gas chromatographic method
• BS-EN-15751 - Automotive fuels. Fatty acid methyl ester (FAME) fuel and blends with diesel fuel. Determination of oxidation stability by accelerated oxidation method
• BS-EN-15769 - Ethanol as a blending component of petrol. Determination of appearance. Visual method
• BS-EN-15779 - Petroleum products and fat and oil derivates. Fatty acid methyl esters (FAME) for diesel engines. Determination of polyunsaturated (4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography
• BS-EN-15794 - Determination of explosion points of flammable liquids
• BS-EN-15837 - Ethanol as a blending component for petrol. Determination of phosphorus, copper and sulfur content. Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
• BS-EN-15938 - Automotive fuels. Ethanol blending component and ethanol (E85) automotive fuel. Determination of electrical conductivity
• BS-EN-15940 - Automotive fuels. Paraffinic diesel fuel from synthesis or hydrotreatment. Requirements and test methods
• BS-EN-1601 - Liquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID)
• BS-EN-1601-TC - Tracked Changes. Liquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID)
• BS-EN-16091 - Liquid petroleum products. Middle distillates and fatty acid methyl ester (FAME) fuels and blend. Determination of oxidation stability by rapid small scale oxidation test (RSSOT)
• BS-EN-16091-TC - Tracked Changes. Liquid petroleum products. Middle distillates and fatty acid methylester (FAME) fuels and blend. Determination of oxidation stability by rapid small scale oxidation test (RSSOT)
• BS-EN-16135 - Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS)
• BS-EN-16136 - Automotive fuels. Determination of manganese and iron content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method
• BS-EN-16136-TC - Tracked Changes. Automotive fuels. Determination of manganese and iron content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method
• BS-EN-16144 - Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Fixed range injection period, constant volume combustion chamber method
• BS-EN-16214-1 - Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers
• BS-EN-16214-3 - Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers
• BS-EN-16214-4 - Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers
• BS-EN-16270 - Automotive fuels. Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel. Gas chromatographic method
• BS-EN-16294 - Petroleum products and fat and oil derivatives. Determination of phosphorus content in fatty acid methyl esters (FAME). Optical emission spectral analysis with inductively coupled plasma (ICP OES)
• BS-EN-16300 - Automotive fuels. Determination of iodine value in fatty acid methyl esters (FAME). Calculation method from gas chromatographic data
• BS-EN-16329 - Diesel and domestic heating fuels. Determination of cold filter plugging point. Linear cooling bath method
• BS-EN-16329-TC - Tracked Changes. Diesel and domestic heating fuels. Determination of cold filter plugging point. Linear cooling bath method
• BS-EN-16423 - Liquefied petroleum gases. Determination of dissolved residue. Gas chromatographic method using liquid, on-column injection
• BS-EN-16476 - Liquid petroleum products. Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel. Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)
• BS-EN-16568-TC - Tracked Changes. Automotive fuels. Blends of Fatty acid methyl ester (FAME) with diesel fuel. Determination of oxidation stability by rapidly accelerated oxidation method at 120 C
• BS-EN-16576 - Automotive fuels. Determination of manganese and iron content in diesel. Inductively coupled plasma optical emission spectrometry (ICP OES) method
• BS-EN-16709 - Automotive fuels. High FAME diesel fuel (B20 and B30). Requirements and test methods
• BS-EN-16715 - Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
• BS-EN-16734 - Automotive fuels. Automotive B10 diesel fuel. Requirements and test methods
• BS-EN-16734-TC - Tracked Changes. Automotive fuels. Automotive B10 diesel fuel. Requirements and test methods
• BS-EN-16761-1 - Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography
• BS-EN-16761-2 - Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography
• BS-EN-16896 - Petroleum products and related products. Determination of kinematic viscosity. Method by Stabinger type viscosimeter
• BS-EN-16906 - Liquid petroleum products. Determination of the ignition quality of diesel fuels. BASF engine method
• BS-EN-16934 - Automotive fuels and fat and oil derivates, Determination of steryl glycosides in fatty acid methyl esters (FAME). Method by GC-MS with prior purification by SPE
• BS-EN-16942 - Fuels. Identification of vehicle compatibility. Graphical expression for consumer information
• BS-EN-16997 - Liquid petroleum products. Determination of the sulfur content in Ethanol (E85) automotive fuel. Wavelength dispersive X-ray fluorescence spectrometric method
• BS-EN-17057 - Automotive fuels and fat and oil derivates. Determination of saturated monoglycerides content in Fatty Acid Methyl Esters (FAME). Method by GC-FID
• BS-EN-17155 - Liquid petroleum products. Determination of indicated cetane number (ICN) of middle distillate fuels. Primary reference fuels calibration method using a constant volume combustion chamber
• BS-EN-17178 - Liquid petroleum products. Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy
• BS-EN-17306 - Liquid petroleum products. Determination of distillation characteristics at atmospheric pressure. Micro-distillation
• BS-EN-228 - Automotive fuels. Unleaded petrol. Requirements and test methods
• BS-EN-237 - Methods of test for petroleum and its products
• BS-EN-238 - Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of the benzene content by infrared spectrometry
• BS-EN-24260 - Methods of test for petroleum and its products. Petroleum products and hydrocarbons. Determination of sulfur content. Wickbold combustion method
• BS-EN-25163 - Methods of test for petroleum and its products. Motor and aviation-type fuels. Determination of knock characteristics. Motor method
• BS-EN-25164 - Methods of test for petroleum and its products. Motor fuels. Determination of knock characteristics. Research method
• BS-EN-589 - Automotive fuels. LPG. Requirements and test methods
• BS-EN-589-TC - Tracked Changes. Automotive fuels. LPG. Requirements and test methods
• BS-EN-590 - Automotive fuels. Diesel. Requirements and test methods
• BS-EN-ISO-12156-1 - Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR)
• BS-EN-ISO-12156-1-TC - Tracked Changes. Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR)
• BS-EN-ISO-13032 - Petroleum products. Determination of low concentration of sulfur in automotive fuels. Energy-dispersive X-ray fluorescence spectrometric method
• BS-EN-ISO-13759 - Methods of test for petroleum and its products. Petroleum products. Determination of alkyl nitrate in diesel fuels. Spectrometric method
• BS-EN-ISO-20846 - Petroleum products. Determination of sulfur content of automotive fuels. Ultraviolet fluorescence method
• BS-EN-ISO-4264 - Petroleum products. Calculation of cetane index of middle-distillate fuels by the four variable equation
• BS-EN-ISO-4264-TC - Tracked Changes. Petroleum products. Calculation of cetane index of middle-distillate fuels by the four variable equation
• BS-EN-ISO-5163 - Petroleum products. Determination of knock characteristics of motor and aviation fuels. Motor method
• BS-EN-ISO-5164 - Petroleum products. Determination of knock characteristics of motor fuels. Research method
• BS-EN-ISO-6246 - Petroleum products. Gum content of fuels. Jet evaporation method
• BS-ISO-10307-1 - Petroleum products. Total sediment in residual fuel oils
• BS-ISO-10307-2 - Petroleum products. Total sediment in residual fuel oils
• BS-ISO-12156-1 - Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method
• BS-ISO-12156-2 - Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR)
• BS-ISO-12156-2-TC - Tracked Changes. Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR)
• BS-ISO-15911 - Methods of test for petroleum and its products. Estimation of net specific energy of aviation turbine fuels using hydrogen content data
• BS-ISO-16861 - Petroleum products. Fuels (class F). Specifications of dimethyl ether (DME)
• BS-ISO-17196 - Dimethyl ether (DME) for fuels. Determination of impurities. Gas chromatographic method
• BS-ISO-17197 - Dimethyl ether (DME) for fuels. Determination of water content. Karl Fischer titration method
• BS-ISO-17198 - Dimethyl ether (DME) for fuels. Determination of total sulfur, ultraviolet fluorescence method
• BS-ISO-17315 - Petroleum products and other liquids. Ethanol. Determination of total acidity by potentiometric titration
• BS-ISO-17786 - Dimethyl ether (DME) for fuels. Determination of high temperature (105C) evaporation residues. Mass analysis method
• BS-ISO-4261 - Petroleum products. Fuels (class F). Specifications of gas turbine fuels for industrial and marine applications
• BS-ISO-6249 - Petroleum products. Determination of thermal oxidation stability of gas turbine fuels
• BS-ISO-8216-1 - Petroleum products. Fuels (class F) classification
• BS-ISO-8216-1-TC - Tracked Changes. Petroleum products. Fuels (class F) classification
• BS-ISO-8216-99 - Petroleum products. Fuels (class F). Classification
• BS-ISO-8217 - Petroleum products. Fuels (class F). Specifications of marine fuels
• BS-MA-100 - Specification for petroleum fuels for marine oil engines and boilers
• CWA-15145 - Automotive Fuels, Water in Diesel Fuel Emulsions for Use in Internal Combustion Engin
• CWA-15940 - Automotive Fuels, Paraffinic Diesel From Synthesis or Hydrotreatment, Requirments & Te
• CWA-16379 - Fuels and biofuels. Pure plant oil fuel for diesel engine Concepts. Requirements and test methods
• DD-CEN-15293 - Automotive fuels. Ethanol (E85) automotive fuel. Requirements and test methods
• PD-CEN-15139 - Petroleum products and other liquids. Applicability of test methods on sulfur determination in petrol and diesel fuel
• PD-CEN-15160 - Petroleum and related products. Applicability of diesel fuel test methods for fatty acid methyl esters (FAME). Information and results on round robin tests
• PD-CEN-15367-1 - Petroleum products. Guidelines for good housekeeping
• PD-CEN-15367-2 - Petroleum products. Guide for good housekeeping. Automotive petrol fuels
• PD-CEN-15367-3 - Petroleum products. Guide for good housekeeping. Prevention of cross contamination
• PD-CEN-15738 - Petroleum products. Heating fuels. Need, feasibility and required deliverables for a common European specification
• PD-CEN-15745 - Liquid petroleum products. Determination of hydrocarbon types and oxygenates via multidimensional gas chromatography method. Round Robin research report
• PD-CEN-15993 - Automotive fuels. Ethanol (E85) automotive fuel. Background to the parameters required and their respective limits and determination
• PD-CEN-16214-2 - Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers
• PD-CEN-16366 - Liquid petroleum products. Middle distillates and fatty acid methyl ester (FAME) fuels and blends. Round Robin report on applicability of Rapid Small Scale Oxidation Test method
• PD-CEN-16389 - Automotive fuels. Paraffinic diesel fuel and blends with FAME. Background to the parameters required and their respective limits and determination
• PD-CEN-16514 - Automotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol
• PD-CEN-16557 - Automotive fuels. High FAME diesel fuel blends (B11-B30). Background to the parameters required and their respective limits and determination
• PD-CEN-16569 - Automotive fuels. Assessing the effects of E10 petrol on vehicle emissions and performance
• PD-CEN-16680 - Liquid petroleum products. Investigation on internal diesel injector sticking deposits mechanisms and the impacts of corrosion inhibitors
• PD-CEN-16884 - Automotive fuels. Diesel fuel. Cold operability testing and fuel performance correlation
• PD-CEN-16885 - Liquid petroleum products. Investigation on test method for measurement of the oxidation stability of diesel and diesel/FAME blends by Acid Number after ageing
• PD-CEN-16982 - Diesel blends and fuels. Cold filterability issues
• PD-CEN-17225 - Fuels and biofuels. Assessment on oxidation stability determination methods for distillate fuels and blends thereof with fatty acid methyl esters (FAME)
• PD-CEN-17491 - Automotive fuels. Information on aniline, N-methyl aniline, N-ethyl aniline, N,N di-methyl aniline and secondary-butyl acetate when used as blending components in unleaded petrol
• PD-CEN-17544 - Automotive fuels. Report on studies done on cold soak filter blocking tendency (CS-FBT) on fatty acid methyl ester (FAME) as blend component for diesel fuel, and of diesel fuel containing up to 30 % (V/V) of FAME
• PD-CEN-17548 - Automotive fuels. Diesel fuel market issues. Abrasive particles investigation report
• PD-ISO-17306 - Petroleum products. Biodiesel. Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography
• PD-ISO-17307 - Petroleum products. Biodiesel. Determination of total esters content by gas chromatography
• PD-ISO/PAS-23263 - Petroleum products. Fuels (class F). Considerations for fuel suppliers and users regarding marine fuel quality in view of the implementation of maximum 0,50 % sulfur in 2020

ISO:

• ISO-10307-1 - Petroleum products - Total sediment in residual fuel oils - Part 1: Determination by hot filtration
• ISO-10307-2 - Petroleum products - Total sediment in residual fuel oils - Part 2: Determination using standard procedures for ageing
• ISO-10478 - Petroleum products - Determination of aluminium and silicon in fuel oils - Inductively coupled plasma emission and atomic absorption spectroscopy methods
• ISO-12156-1 - Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method
• ISO-12156-2 - Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 2: Limit
• ISO-12205 - Petroleum products - Determination of the oxidation stability of middle-distillate fuels
• ISO-13032 - Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method
• ISO-13759 - Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method
• ISO-15167 - Petroleum products - Determination of particulate content of middle distillate fuels - Laboratory filtration method
• ISO-15911 - Petroleum products -- Estimation of net specific energy of aviation turbine fuels using hydrogen content data
• ISO-16861 - Petroleum products - Fuels (class F) - Specifications of dimethyl ether (DME)
• ISO-17196 - Dimethyl ether (DME) for fuels - Determination of impurities - Gas chromatographic method
• ISO-17197 - Dimethyl ether (DME) for fuels - Determination of water content - Karl Fischer titration method
• ISO-17198 - Dimethyl ether (DME) for fuels - Determination of total sulfur, ultraviolet fluorescence method
• ISO-17306 - Petroleum products - Biodiesel - Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography
• ISO-17307 - Petroleum products - Biodiesel - Determination of total esters content by gas chromatography
• ISO-17308 - Petroleum products and other liquids - Ethanol - Determination of electrical conductivity
• ISO-17315 - Petroleum products and other liquids - Ethanol - Determination of total acidity by potentiometric titration
• ISO-17786 - Dimethyl ether (DME) for fuels - Determination of high temperature (105°C) evaporation residues - Mass analysis method
• ISO-20846 - Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method
• ISO-3012 - Petroleum products -- Determination of thiol (mercaptan) sulfur in light and middle distillate fuels -- Potentiometric method
• ISO-3013 - Petroleum products - Determination of the freezing point of aviation fuels
• ISO-3014 - Petroleum products - Determination of the smoke point of kerosine
• ISO-3648 - Aviation fuels - Estimation of net specific energy
• ISO-3734 - Petroleum products - Determination of water and sediment in residual fuel oils - Centrifuge method
• ISO-3735 - Crude petroleum and fuel oils -- Determination of sediment -- Extraction method
• ISO-3830 - Petroleum products - Determination of lead content of gasoline - Iodine monochloride method
• ISO-4261 - Petroleum products - Fuels (class F) - Specifications of gas turbine fuels for industrial and marine applications
• ISO-4264 - Petroleum products - Calculation of cetane index of middle-distillate fuels by the four variable equation
• ISO-4264-AM1 - - Amendment 1
• ISO-5163 - Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method
• ISO-5164 - Petroleum products - Determination of knock characteristics of motor fuels - Research method
• ISO-5165 - Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method
• ISO-6246 - Petroleum products - Gum content of fuels - Jet evaporation method
• ISO-6246-AM1 - - Amendment 1: Purity requirement for n-heptane
• ISO-6249 - Petroleum products - Determination of thermal oxidation stability of gas turbine fuels
• ISO-6250 - Petroleum products - Determination of the water reaction of aviation fuels
• ISO-6297 - Petroleum products - Aviation and distillate fuels - Determination of electrical conductivity
• ISO-7536 - Petroleum products - Determination of oxidation stability of gasoline - Induction period method
• ISO-8216-1 - Petroleum products - Fuels (class F) classification - Part 1: Categories of marine fuels
• ISO-8216-2 - Petroleum products - Fuels (class F) - Classification - Part 2 : Categories of gas turbine fuels for industrial and marine applications
• ISO-8216-99 - Petroleum products - Fuels (class F) - Classification - Part 99: General
• ISO-8217 - Petroleum products - Fuels (class F) - Specifications of marine fuels
• ISO-8691 - Petroleum products - Low levels of vanadium in liquid fuels - Determination by flameless atomic absorption spectrometry after ashing
• ISO/PAS-23263 - Petroleum products - Fuels (class F) - Considerations for fuel suppliers and users regarding marine fuel quality in view of the implementation of maximum 0,50 % sulfur in 2020

Other SDOs:

• CEN-17225 - Fuels and biofuels - Assessment on oxidation stability determination methods for distillate fuels and blends thereof with fatty acid methyl esters (FAME)
• CGSB-3.512 - Automotive Ethanol Fuel (E50-E85)
• DIN-51413-9 - Testing of liquid petroleum hydrocarbons - Analysis by gas chromatography - Part 9: Determination of total aromatics and benzene by column switching procedure
• DIN-51425 - General Principles Governing High-Performance Liquid Chromatographic Analysis of Petro
• DIN-51426 - Testing of fuel oil - Spectrophotometric determination of the red dye content in domestic fuel oil
• DIN-51603-1 - Liquid fuels - Fuel oils - Part 1: Fuel oils EL, minimum requirements
• DIN-51603-3 - Liquid fuels - Fuel oils - Part 3: Fuel oil S, Minimum requirements
• DIN-51603-5 - Liquid fuels - Fuel oils - Part 5: Fuel oils SA, Minimum requirements
• DIN-51798 - Testing of Liquid Fuels - Determination of the Crystallization Point of Pure Benzene
• DIN-51900-3 - Part 3: Method Using Adiabatic Jacket, Testing of Solid & Liquid Fuels - Determination
• DIN-EN-14078 - Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method; German version EN 14078:2014
• DIN-EN-14213 - Corrigenda to DIN EN 14213:2003-11
• DIN-EN-14214 - Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods; German version EN 14214:2012+A1:2014
• DIN-EN-14274 - Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS); German version EN 14274:2013
• DIN-EN-14275 - Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers; German version EN 14275:2013
• DIN-EN-14517 - Liquid petroleum products - Determination of hydrocarbon types and oxygenates in petrol - Multidimensional gas chromatography method; German version EN 14517:2004
• DIN-EN-14998 - Derivatives From Coal Pyrolysis, Coal Tar Based Oils; Fluxing Oils, Specifications & T
• DIN-EN-228 - Automotive fuels - Unleaded petrol - Requirements and test methods; German version EN 228:2012+A1:2017
• DIN-EN-237 - Liquid Petroleum Products, Petrol, Determination of Low Lead Concentrations by Atomica
• DIN-EN-590 - Automotive fuels - Diesel - Requirements and test methods; German version EN 590:2013+A1:2017
• DIN-EN-ISO-20846 - Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method
• DIN-EN-ISO-20884 - Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry
• DIN-EN-ISO-5163 - Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method
• DIN-EN-ISO-5164 - Petroleum products - Determination of knock characteristics of motor fuels - Research method
• EN-116 - Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
• EN-12177 - Methods of Test for Petroleum & It's Products, Liquid Petroleum Products, Unleaded Pet
• EN-12662 - Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
• EN-13016-1 - Liquid Petroleum Products, Vapour Pressure, Determination of Air Saturated Vapour Pres
• EN-13016-2 - Liquid Petroleum Products, Vapour Pressure, Determination of Absolute Vapour Pressure
• EN-13723 - Petroleum Products, Determination of Low Lead Contents in Gasolines by Wavelength-Disp
• EN-14078 - Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method
• EN-14156 - Derivatives From Coal Pyrolysis, Coal Tar Based Oils: Coal Tar Fuel, Specifications &
• EN-14214 - Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
• EN-14274 - Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS)
• EN-14275 - Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers
• EN-14517 - Liquid Petroleum Products, Determination of Hydrocarbon Types & Oxygenates in Petrol,
• EN-14998 - Derivatives From Coal Pyrolysis, Coal Tar Based Oils: Fluxing Oils, Specifications & T
• EN-15195 - Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
• EN-15293 - Automotive fuels - Automotive ethanol (E85) fuel - Requirements and test methods
• EN-15376 - Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
• EN-15470 - Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
• EN-15471 - Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method
• EN-15492 - Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
• EN-15691 - Ethanol as a Blending Component for Petrol - Determination of Dry Residue (Involatile
• EN-15692 - Ethanol as a Blending Component for Petrol, Determination of Water Content, Karl Fisch
• EN-15721 - Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
• EN-15751 - Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method
• EN-15769 - Ethanol as a Blending Component of Petrol, Determination of Appearance, Visual Method
• EN-15779 - Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (=4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography
• EN-15794 - Determination of Explosion Points of Flammable Liquids
• EN-15837 - Ethanol as a Blending Component for Petrol - Determination of Phosphorus, Copper & Sul
• EN-15940 - Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
• EN-1601 - Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID)
• EN-16091 - Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method
• EN-16135 - Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS)
• EN-16136 - Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method
• EN-16144 - Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method
• EN-16214-1 - Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology
• EN-16214-4 - Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 4: Calculation methods of the greenhouse gas emission balance using a life cycle analysis approach
• EN-16270 - Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method
• EN-16294 - Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES)
• EN-16300 - Automotive fuels - Determination of iodine value in fatty acid methyl esters (FAME) - Calculation method from gas chromatographic data
• EN-16329 - Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
• EN-16423 - Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection
• EN-16476 - Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)
• EN-16568 - Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 Degrees C
• EN-16576 - Automotive fuels - Determination of manganese and iron content in diesel - Inductively coupled plasma optical emission spectrometry (ICP OES) method
• EN-16709 - Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods
• EN-16715 - Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
• EN-16734 - Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods
• EN-16761-1 - Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique
• EN-16761-2 - Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique
• EN-16896 - Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
• EN-16906 - Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method
• EN-16942 - Fuels - Identification of vehicle compatibility - Graphical expression for consumer information
• EN-16997 - Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method
• EN-17057 - Automotive fuels and fat and oil derivates - Determination of saturated monoglycerides content in Fatty Acid Methyl Esters (FAME) - Method by GC-FID
• EN-17155 - Liquid petroleum products - Determination of indicated cetane number (ICN) of middle distillate fuels - Primary reference fuels calibration method using a constant volume combustion chamber
• EN-228 - Automotive fuels - Unleaded petrol - Requirements and test methods
• EN-237 - Liquid Petroleum Products, Petrol, Determination of Low Lead Concentrations by Atomic
• EN-590 - Automotive fuels - Diesel - Requirements and test methods
• EN-ISO-121256-1 - Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method
• EN-ISO-12156-1 - Diesel Fuel, Assessment of Libricity Using the High-Frequency Recirprocating Rig (Hfrr
• EN-ISO-13032 - Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method
• EN-ISO-13759 - Methods of Test for Petroleum & Its Products, Petroleum Products, Determination of Alk
• EN-ISO-20846 - Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method
• EN-ISO-20847 - Petroleum Products, Determination of Sulfur Content of Automotive Fuels, Energy-Disper
• EN-ISO-4264 - Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:2007/Amd 1:2013)
• EN-ISO-5163 - Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method
• EN-ISO-5164 - Petroleum products - Determination of knock characteristics of motor fuels - Research method
• EN-ISO-6246 - Petroleum products - Gum content of fuels - Jet evaporation method
• JIS-K-2202 - Motor gasoline
• JIS-K-2204 - Diesel Fuel
• SIS-155137 - Gas turbine fuels. Determination of sticking temperature of ash
• SIS-155139 - Petroleum products and hydrocarbon solvents. Determination of aniline point and mixed aniline point
• SIS-CEN/TR-15367 - Petroleum products - Automotive diesel fuels - Guide for good housekeeping
• SIS-CEN/TR-15367-1 - Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels
• SIS-CEN/TR-15367-2 - Petroleum products - Guide for good housekeeping - Part 2: Automotive petrol fuels
• SIS-CEN/TR-15367-3 - Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination
• SIS-CEN/TR-15745 - Liquid petroleum products - Determination of hydrocarbon types and oxygenates via multidimensional gas chromatography method - Round Robin research report
• SIS-CEN/TR-15993 - Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination
• SIS-CEN/TR-16389 - Automotive fuels - Paraffinic diesel fuel and blends with FAME - Background to the parameters required and their respective limits and determination
• SIS-CEN/TR-16884 - Automotive fuels - Diesel fuel - Cold operability testing and fuel performance correlation
• SIS-CEN/TR-16885 - Liquid petroleum products - Investigation on test method for measurement of the oxidation stability of diesel and diesel/FAME blends by Acid Number after ageing
• SIS-CEN/TR-16982 - Diesel blends and fuels - Cold filterability issues
• SIS-CEN/TR-17225 - Fuels and biofuels - Assessment on oxidation stability determination methods for distillate fuels and blends thereof with fatty acid methyl esters (FAME)
• SIS-CEN/TR-17491 - Automotive fuels - Information on aniline, N-methyl aniline, N-ethyl aniline, N,N di-methyl aniline and secondary-butyl acetate when used as blending components in unleaded petrol
• SIS-CEN/TR-17544 - Automotive fuels - Report on studies done on cold soak filter blocking tendency (CS-FBT) on fatty acid methyl ester (FAME) as blend component for diesel fuel, and of diesel fuel containing up to 30 % (V/V) of FAME
• SIS-CEN/TR-17548 - Automotive fuels - Diesel fuel market issues - Abrasive particles investigation report
• SIS-ISO/PAS-23263 - Petroleum products — Fuels (class F) — Considerations for fuel suppliers and users regarding marine fuel quality in view of the implementation of maximum 0,50 % sulfur in 2020
• SMS-ISO-2787 - Rotary and percussive pneumatic tools - Acceptance tests
• SS-155119-2 - Petroleum products - Determination of chemical bound nitrogen content by oxidative combustion method with chemiluminescence detection - Part 2: Boat-inlet
• SS-155402 - Illuminating kerosine (premium kerosine) and heating kerosine (regular kerosine)
• SS-155410 - Fuel oils - Requirements
• SS-155435 - Diesel fuel oil of environmental class 1 and 2 for high-speed diesel engines
• SS-155437 - Automotive fuels - Ethanol for ethanol based fuel (ED95) for modified compression ignition engines - Requirements and test methods
• SS-155461 - Motor fuels - Special petrol for powered implements
• SS-EN-10163-1 - Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements
• SS-EN-116 - Diesel and domestic heating fuels - Determination of cold filter plugging point by stepwise cooling procedure
• SS-EN-12177 - Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography
• SS-EN-12662 - Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
• SS-EN-13016-1 - Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
• SS-EN-13016-2 - Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute vapour pressure (AVP) between 40°C and 100°C
• SS-EN-13016-3 - Liquid petroleum products - Vapour pressure - Part 3: Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple Expansion Method)
• SS-EN-13132 - Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching
• SS-EN-13723 - Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF)
• SS-EN-14078 - Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method
• SS-EN-14213 - Heating fuels - Fatty acid methyl esters (FAME) - Requirements and test methods
• SS-EN-14214 - Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
• SS-EN-14274 - Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS)
• SS-EN-14275 - Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers
• SS-EN-14517 - Liquid petroleum products - Determination of hydrocarbon types and oxygenates in petrol - Multidimensional gas chromatography method
• SS-EN-14679 - Execution of special geotechnical works - Deep mixing
• SS-EN-14998 - Derivatives from coal pyrolysis - Coal tar based oils: fluxings oils - Specifications and test methods
• SS-EN-1504-10 - Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
• SS-EN-15195 - Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
• SS-EN-15293 - Automotive fuels - Automotive ethanol (E85) fuel - Requirements and test methods
• SS-EN-15376 - Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
• SS-EN-15469 - Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection
• SS-EN-15470 - Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
• SS-EN-15471 - Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method
• SS-EN-15484 - Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method
• SS-EN-15485 - Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method
• SS-EN-15486 - Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
• SS-EN-15487 - Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method
• SS-EN-15488 - Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method
• SS-EN-15489 - Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method
• SS-EN-15490 - Ethanol as a blending component for petrol - Determination of pHe
• SS-EN-15491 - Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
• SS-EN-15492 - Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
• SS-EN-15691 - Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method
• SS-EN-15692 - Ethanol as a blending component for gasoline - Determination of water content - Karl Fischer potentiometric titration method
• SS-EN-15721 - Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
• SS-EN-15751 - Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method
• SS-EN-15769 - Ethanol as a blending component of petrol - Determination of appearance - Visual method
• SS-EN-15779 - Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (≥4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography
• SS-EN-15794 - Determination of explosion points of flammable liquids
• SS-EN-15837 - Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
• SS-EN-15938 - Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity
• SS-EN-15940 - Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
• SS-EN-1601 - Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID)
• SS-EN-16091 - Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation test (RSSOT)
• SS-EN-16135 - Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS)
• SS-EN-16136 - Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method
• SS-EN-16144 - Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method
• SS-EN-16214-1 - Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology
• SS-EN-16214-3 - Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 3: Biodiversity and environmental aspects related to nature protection purposes
• SS-EN-16214-4 - Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 4: Calculation methods of the greenhouse gas emission balance using a life cycle analysis approach
• SS-EN-16270 - Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method
• SS-EN-16294 - Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES)
• SS-EN-16300 - Automotive fuels - Determination of iodine value in fatty acid methyl esters (FAME) - Calculation method from gas chromatographic data
• SS-EN-16329 - Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
• SS-EN-16423 - Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection
• SS-EN-16476 - Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)
• SS-EN-16568 - Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C
• SS-EN-16576 - Automotive fuels - Determination of manganese and iron content in diesel - Inductively coupled plasma optical emission spectrometry (ICP OES) method
• SS-EN-16643 - Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification
• SS-EN-16709 - Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods
• SS-EN-16715 - Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
• SS-EN-16734 - Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods
• SS-EN-16761-1 - Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique
• SS-EN-16761-2 - Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique
• SS-EN-16896 - Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
• SS-EN-16906 - Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method
• SS-EN-16942 - Fuels - Identification of vehicle compatibility - Graphical expression for consumer information
• SS-EN-16997 - Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method
• SS-EN-17057 - Automotive fuels and fat and oil derivates - Determination of saturated monoglycerides content in Fatty Acid Methyl Esters (FAME) - Method by GC-FID
• SS-EN-17124 - Hydrogen fuel - Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen - Proton exchange membrane (PEM) fuel cell applications for vehicles
• SS-EN-17155 - Liquid petroleum products - Determination of indicated cetane number (ICN) of middle distillate fuels - Primary reference fuels calibration method using a constant volume combustion chamber
• SS-EN-17178 - Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy
• SS-EN-17306 - Liquid petroleum products - Determination of distillation characteristics at atmospheric pressure - Micro-distillation
• SS-EN-228 - Automotive fuels - Unleaded petrol - Requirements and test methods
• SS-EN-237 - Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry
• SS-EN-238 - Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
• SS-EN-23830 - Petroleum products - Gasoline - Determination of lead content - Iodine monochloride method (ISO 3830:1981)
• SS-EN-238-AM1 - Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
• SS-EN-241 - Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method
• SS-EN-25163 - Motor and aviation-type fuels - Determination of knock characteristics - Motor method (ISO 5163:1990)
• SS-EN-25164 - Motor fuels - Determination of knock characteristics - Research method (ISO 5164:1990)
• SS-EN-26246 - Petroleum products - Motor gasoline and aviation fuels - Determination of existent gum - Jet evaporation method (ISO 6246:1981)
• SS-EN-459-3 - Building lime - Part 3: Conformity evaluation
• SS-EN-589 - Automotive fuels - LPG - Requirements and test methods
• SS-EN-590 - Automotive fuels - Diesel - Requirements and test methods
• SS-EN-ISO-12156-1 - Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2018)
• SS-EN-ISO-12205 - Petroleum products - Determination of oxidation stability of middle-distillate fuels (ISO 12 205:1995)
• SS-EN-ISO-13032 - Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012)
• SS-EN-ISO-13759 - Petroleumproducts - Determination of alkyl nitrate in diesel fuels - Spectrofotometric method (ISO 13759:1996)
• SS-EN-ISO-14596 - Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:2007)
• SS-EN-ISO-15195 - Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
• SS-EN-ISO-15797 - Textiles - Industrial washing and finishing procedures for testing of workwear (ISO 15797:2017)
• SS-EN-ISO-16591 - Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010)
• SS-EN-ISO-20846 - Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2019)
• SS-EN-ISO-28881 - Machine tools - Safety - Electrical discharge machines (ISO 28881:2022)
• SS-EN-ISO-3735 - Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999)
• SS-EN-ISO-3830 - Petroleum products - Determination of lead content of gasoline - Iodine monocloride method (ISO 3830:1993)
• SS-EN-ISO-4264 - Petroleum products - Calculation of cetane index of middle-distillate fuels by the four variable equation (ISO 4264:2018)
• SS-EN-ISO-4264-AM1 - Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:2007/Amd 1:2013)
• SS-EN-ISO-5163 - Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014)
• SS-EN-ISO-5164 - Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014)
• SS-EN-ISO-5165 - Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:2020)
• SS-EN-ISO-6246 - Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017)
• SS-EN-ISO-6246-AM1 - Petroleum products - Gum content of fuels - Jet evaporation method - Amendment 1: Purity requirement for n-heptane (ISO 6246:2017/Amd 1:2019)
• SS-EN-ISO-7536 - Petroleum products - Determination of oxidation stability of gasoline - Induction period method (ISO 7536:1994)
• SS-ISO-10307-1 - Petroleum products - Total sediment in residual fuel oils - Part 1: Determination by hot filtration (ISO 10307-1:2009, IDT)
• SS-ISO-10307-2 - Petroleum products - Total sediment in residual fuel oils - Part 2: Determination using standard procedures for ageing (ISO 10307-2:2009, IDT)
• SS-ISO-10478 - Petroleum products - Determination of aluminium and silicon in fuel oils - Inductively coupled plasma emission and atomic absorption spectroscopy methods
• SS-ISO-16844-1 - Road vehicles — Tachograph systems — Part 1: Electromechanical components (ISO 16844-1:2022, IDT)
• SS-ISO-17315 - Petroleum products and other liquids - Ethanol - Determination of total acidity by potentiometric titration (ISO 17315:2014, IDT)
• SS-ISO-3012 - Petroleum products - Determination of thiol (mercaptan) sulfur in light and middle distillate fuels - Potentiometric method
• SS-ISO-3013 - Petroleum products - Determination of the freezing point of aviation fuels
• SS-ISO-3014 - Petroleum products - Determination of the smoke point of kerosine
• SS-ISO-3648 - Aviation fuels - Estimation of net specific energy
• SS-ISO-3734 - Petroleum products - Determination of water and sediment in residual fuel oils - Centrifuge method
• SS-ISO-4264 - Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation
• SS-ISO-5163 - Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014)
• SS-ISO-5164 - Motor fuels - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2005)
• SS-ISO-5165 - Diesel fuels - Determination of ignition quality - Cetane method
• SS-ISO-5275 - Petroleum products and hydrocarbon solvents - Detection of thiols and other sulfur species - Doctor test (ISO 5275:2003, IDT)
• SS-ISO-6249 - Petroleum products — Determination of thermal oxidation stability of gas turbine fuels (ISO 6249:2021, IDT)
• SS-ISO-6250 - Petroleum products - Determination of water reaction of aviation fuels
• SS-ISO-6297 - Petroleum products - Aviation and distillate fuels - Determination of electrical conductivity
• SS-ISO-7536 - Petroleum products - Determination of oxidation stability of gasoline - Induction period method
• SS-ISO-8085-2 - Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings
• SS-ISO-8216-0 - Petroleum products - Fuel (class F) - Classification - Part 0: General
• SS-ISO-8216-2 - Petroleum products - Fuel (class F) - Classification - Part 2: Categories of gas turbine fuels for industrial and marine applications
• SS-ISO-8216-3 - Petroleum products - Fuels (class F) - Classification - Part 3: Family L (Liquefied petroleum gases)
• SS-ISO-8691 - Petroleum products - Low levels of vanadium in liquid fuels - Determination by flameless atomic absorption spectrometry after ashing
• SS-ISO-91 - Petroleum and related products - Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions (ISO 91:2017, IDT)
• SS-ISO-91-1 - Petroleum measurement tables - Part 1: Tables based on reference temperatures of 15 degrees Celsiusand 60 degrees Farenheit
• SS-ISO-9162 - Petroleum products - Fuels (class F) - Liquefied petroleum gases - Specifications (ISO 9162:2013, IDT)
• ULC-S668 - Standard for Liners Used for Secondary Containment of Above Ground Flammable and Combustible Liquid Tanks
• UNE-EN-16715 - Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
• UNE-EN-16761-1 - Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique
• UNE-EN-16761-2 - Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique
• UNE-EN-16896 - Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
• UNE-EN-590 - Automotive fuels - Diesel - Requirements and test methods
• UNE-EN-ISO-12156-1 - Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method