Document Center List of Standards on Properties Of Surfaces
ICS Code 17.040.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A754 - Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
- ASTM-B244 - Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM-B487 - Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
- ASTM-B490 - Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
- ASTM-B499 - Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- ASTM-B504 - Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
- ASTM-B530 - Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
- ASTM-B554 - Recommended Practice for Measurement of Thickness of Metallic Coatings on Nonmetallic Substrates (Withdrawn 1986)
- ASTM-B567 - Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
- ASTM-B568 - Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
- ASTM-B588 - Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique (Withdrawn 2016)
- ASTM-B659 - Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
- ASTM-B748 - Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM-C664 - Standard Test Methods for Thickness of Diffusion Coating
- ASTM-C808 - Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
- ASTM-C813 - Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
- ASTM-C835 - Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C
- ASTM-D4166 - Standard Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument (Withdrwan 2008)
- ASTM-D4417 - Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
- ASTM-D4518 - Standard Test Methods for Measuring Static Friction of Coating Surfaces (Withdrawn 2000)
- ASTM-D5235 - Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
- ASTM-D5796 - Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device
- ASTM-D7031 - Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
- ASTM-D7091 - Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
- ASTM-D7378 - Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
- ASTM-D7869 - Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
- ASTM-E1182 - Standard Test Method for Measurement of Surface Layer Thickness by Radial Sectioning (Withdrawn 2002)
- ASTM-E1577 - Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis (Withdrawn 2020)
- ASTM-E1845 - Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth
- ASTM-E1965 - Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
- ASTM-E2382 - Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
- ASTM-E2386 - Standard Guide for Conduct of PDD Screening Examinations
- ASTM-E252 - Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
- ASTM-E2666 - Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports
- ASTM-E2818 - Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
- ASTM-E2835 - Standard Test Method for Measuring Deflections Using a Portable Impulse Plate Load Test Device
- ASTM-E284 - Standard Terminology of Appearance
- ASTM-E303 - Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
- ASTM-E376 - Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
- ASTM-E408 - Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
- ASTM-E430 - Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
- ASTM-E667 - Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers (Withdrawn 2022)
- ASTM-E673 - Standard Terminology Relating to Surface Analysis (Withdrawn 2012)
- ASTM-E797 - Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
- ASTM-F1372 - Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
- ASTM-F1374 - Standard Test Method for Ionic/Organic Extractables of Internal Surfaces-IC/GC/FTIR for Gas Distribution System Components
- ASTM-F1375 - Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
- ASTM-F1438 - Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
- ASTM-F154 - Standard Guide for Identification of Structures and Contaminants Seen on Specular Silicon Surfaces (Withdrawn 2003)
- ASTM-F1811 - Standard Practice for Estimating the Power Spectral Density Function and Related Finish Parameters from Surface Profile Data (Withdrawn 2003)
- ASTM-F24 - Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces
- ASTM-F2508 - Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
- ASTM-F2791 - Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions
- ASTM-F2965 - Standard Guide for Selection of Walkway Surfaces and Treatments When Considering Aggressive Contaminant Conditions in Commercial and Industrial (Not Including Construction) Environments (Withdrawn 2022)
- ASTM-F532 - Test Methods for Measuring Width of Defects in Optical Surfaces, Using Nomarski Differential Microscopy
- ASTM-G115 - Standard Guide for Measuring and Reporting Friction Coefficients
- ASTM-G117 - Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests (Withdrawn 2016)
- ASTM-G171 - Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
- ASTM-G194 - Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
- ASTM-G211 - Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
- ASTM-G65 - Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
- ASTM-G75 - Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
- ASTM-G81 - Standard Test Method for Jaw Crusher Gouging Abrasion Test
- ASTM-G83 - Standard Test Method for Wear Testing with a Crossed-Cylinder Apparatus (Withdrawn 2005)
- ASTM-G84 - Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
- ASTM-G98 - Standard Test Method for Galling Resistance of Materials
- ASTM-G99 - Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
BSI:
- BS-1134-2 - Guidance & General Information, Assessment of Surface Texture
- BS-2634-1 - Roughness comparison specimens
- BS-2634-2 - Roughness comparison specimens
- BS-4359-2 - Determination of the specific surface area of powders
- BS-7079-A3 - Group a: Visual Assessment of Surface Cleanliness Preparation Grades of Welds, Cut Edg
- BS-7591-1 - Porosity and pore size distribution of materials. Method of evaluation by mercury porosimetry
- BS-7591-2 - Method of Evaluation by Gas Adsorption
- BS-7591-4 - Porosity and pore size distribution of materials
- BS-7941-2 - Methods for measuring the skid resistance of pavement surfaces
- BS-8420 - Methods of measuring irregularities on surfaces of roads, footways and other paved areas using straightedges and wedges
- BS-EN-10049 - Measurement of roughness average Ra and peak count RPc on metallic flat products
- BS-EN-10318 - Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings. Routine method
- BS-EN-1071-6 - Advanced technical ceramics. Methods of test for ceramic coatings. Determination of the abrasion resistance of coatings by a micro-abrasion wear test
- BS-EN-13036-1 - Road and airfield surface characteristics. Test methods
- BS-EN-13036-3 - Road and airfield surface characteristics. Test methods
- BS-EN-13036-4 - Road and airfield surface characteristics. Test methods
- BS-EN-13036-5 - Road and airfield surface characteristics. Test methods
- BS-EN-13523-1 - Coil coated metals. Test methods
- BS-EN-13523-13 - Coil coated metals. Test methods
- BS-EN-13523-14 - Coil coated metals. Test methods
- BS-EN-13523-18 - Coil coated metals. Test methods
- BS-EN-13523-1-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-4 - Coil coated metals. Test methods
- BS-EN-13523-5 - Coil coated metals. Test methods
- BS-EN-13523-6 - Coil coated metals. Test methods
- BS-EN-13523-7 - Coil coated metals. Test methods
- BS-EN-13523-7-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-1370 - Founding. Examination of surface condition
- BS-EN-14571 - Metallic coatings on nonmetallic basis materials. Measurement of coating thickness. Microresistivity method
- BS-EN-15042-1 - Thickness measurement of coatings and characterization of surfaces with surface waves
- BS-EN-15042-2 - Thickness measurement of coatings and characterization of surfaces with surface waves
- BS-EN-15302 - Railway applications. Wheel-rail contact geometry parameters. Definitions and methods for evaluation
- BS-EN-16165 - Determination of slip resistance of pedestrian surfaces. Methods of evaluation
- BS-EN-ISO-11562 - Geometrical product specifications (GPS). Surface texture: Profile method. Metrological characteristics of phase correct filters
- BS-EN-ISO-12085 - Geometrical product specification (GPS). Surface texture. Profile method. Motif parameters
- BS-EN-ISO-12179 - Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
- BS-EN-ISO-12179-TC - Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
- BS-EN-ISO-12181-1 - Geometrical product specifications (GPS). Roundness
- BS-EN-ISO-12181-2 - Geometrical product specifications (GPS). Roundness
- BS-EN-ISO-12780-1 - Geometrical product specifications (GPS). Straightness
- BS-EN-ISO-12780-2 - Geometrical product specifications (GPS). Straightness
- BS-EN-ISO-13565-3 - Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties
- BS-EN-ISO-1463 - Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
- BS-EN-ISO-16610-1 - Geometrical product specifications (GPS). Filtration
- BS-EN-ISO-16610-20 - Geometrical product specifications (GPS). Filtration
- BS-EN-ISO-16610-21 - Geometrical product specifications (GPS). Filtration
- BS-EN-ISO-16610-22 - Geometrical product specifications (GPS). Filtration
- BS-EN-ISO-16610-28 - Geometrical product specifications (GPS). Filtration
- BS-EN-ISO-16610-29 - Geometrical product specifications (GPS). Filtration
- BS-EN-ISO-16610-30 - Geometrical product specifications (GPS). Filtration. Robust profile filters: Basic concepts
- BS-EN-ISO-16610-31 - Geometrical product specifications (GPS). Filtration
- BS-EN-ISO-16610-40 - Geometrical product specifications (GPS). Filtration
- BS-EN-ISO-16610-41 - Geometrical product specifications (GPS). Filtration
- BS-EN-ISO-16610-49 - Geometrical product specifications (GPS). Filtration
- BS-EN-ISO-16610-61 - Geometrical product specification (GPS). Filtration
- BS-EN-ISO-16610-71 - Geometrical product specifications (GPS). Filtration
- BS-EN-ISO-16610-85 - Geometrical product specifications (GPS). Filtration
- BS-EN-ISO-2064 - Metallic and other inorganic coatings. Definitions and conventions concerning the measurement of thickness
- BS-EN-ISO-21920-1 - Geometrical product specifications (GPS). Surface texture: Profile
- BS-EN-ISO-21920-1-TC - Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile
- BS-EN-ISO-21920-3 - Geometrical product specifications (GPS). Surface texture: Profile
- BS-EN-ISO-21920-3-TC - Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile
- BS-EN-ISO-2360 - Non-conductive coatings on non-magnetic electrically conductive base metals. Measurement of coating thickness. Amplitude-sensitive eddy-current method
- BS-EN-ISO-25178-1 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-2 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-2-TC - Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-3 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-6 - Geometrical product specifications (GPS). Surface texture. Areal
- BS-EN-ISO-25178-600 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-601 - Geometrical product specifications (GPS). Surface texture. Areal
- BS-EN-ISO-25178-602 - Geometrical product specifications (GPS). Surface texture. Areal
- BS-EN-ISO-25178-603 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-604 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-605 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-606 - Geometrical product specification (GPS). Surface texture: Areal
- BS-EN-ISO-25178-607 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-70 - Geometrical product specification (GPS). Surface texture: Areal
- BS-EN-ISO-25178-700 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-701 - Geometrical product specifications (GPS). Surface texture. Areal
- BS-EN-ISO-25178-71 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-71-TC - Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-72 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-3497 - Metallic coatings. Measurement of coating thickness. X-ray spectrometric methods
- BS-EN-ISO-3543 - Metallic and non-metallic coatings. Measurement of thickness. Beta backscatter method
- BS-EN-ISO-3882 - Metallic and other inorganic coatings. Review of methods of measurement of thickness
- BS-EN-ISO-4287 - Geometrical product specification (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters
- BS-EN-ISO-4288 - Geometric product specification (GPS). Surface texture. Profile method: Rules and procedures for the assessment of surface texture
- BS-EN-ISO-5436-1 - Geometrical Product Specifications (GPS). Surface texture: Profile method; Measurement standards
- BS-EN-ISO-8502-3 - Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness
- BS-EN-ISO-8502-4 - Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness
- BS-EN-ISO-8502-9 - Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness
- BS-EN-ISO-8503-1 - Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates
- BS-EN-ISO-8503-2 - Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates
- BS-EN-ISO-8503-3 - Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates
- BS-EN-ISO-8503-4 - Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates
- BS-EN-ISO-8785 - Geometrical product specification (GPS). Surface imperfections. Terms, definitions and parameters
- BS-EN-ISO-9220-TC - Tracked Changes. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
- BS-ISO-15086-3 - Hydraulic fluid power. Determination of the fluid-borne noise characteristics of components and systems
- BS-ISO-16610-30 - Geometrical product specifications (GPS). Filtration
- BS-ISO-9277 - Determination of the specific surface area of solids by gas adsorption. BET method
- DD-CEN-1071-10 - Advanced Technical Ceramics, Methods of Test for Ceramic Coatings, Determination of Co
- DD-CEN-13036-2 - Road and airfield surface characteristics. Test methods
- DD-CEN-ISO-12180-1 - Geometrical Product Specifications (Gps), Cylindricity, Vocabulary & Parameters of Cyl
- DD-CEN-ISO-12180-2 - Geometrical Product Specifications (Gps), Cylindricity, Specification Operators
- DD-CEN-ISO-12181-1 - Geometrical product specifications (GPS). Roundness
- DD-CEN-ISO-12181-2 - Geometrical product specifications (GPS). Roundness
- DD-CEN-ISO-12780-1 - Geometrical product specifications (GPS). Straightness
- DD-ENV-ISO-8502-1 - Preparation of Steel Substrates Before Application of Paints & Related Products, Tests
- DD-ISO-15969 - Surface Chemical Analysis, Depth Profiling, Measurement of Sputtered Depth
- DD-ISO-16610-1 - Geometrical product specifications (GPS). Filtration. Overview and basic concepts
- DD-ISO-16610-20 - Geometrical product specifications (GPS). Filtration
- DD-ISO-16610-22 - Geometrical product specifications (GPS). Filtration
- DD-ISO-16610-28 - Geometrical product specifications (GPS). Filtration
- DD-ISO-16610-29 - Geometrical product specifications (GPS). Filtration
- DD-ISO-16610-31 - Geometrical product specifications (GPS). Filtration
- DD-ISO-16610-32 - Geometrical product specifications (GPS). Filtration
- DD-ISO-16610-40 - Geometrical product specifications (GPS). Filtration
- DD-ISO-16610-41 - Geometrical product specifications (GPS). Filtration
- DD-ISO-16610-49 - Geometrical product specifications (GPS). Filtration
- DD-ISO/TR-15969 - Surface chemical analysis. Depth profiling. Measurement of sputtered depth
- PD-CEN-17792 - Railway Applications. Wheel-rail contact geometry parameters. Technical report and background information about EN 15302
- PD-ISO-16610-32 - Geometrical product specifications (GPS). Filtration
- PD-ISO-16610-32-TC - Tracked Changes. Geometrical product specifications (GPS). Filtration
ISO:
- ISO-11562 - Corrigendum
- ISO-12085 - Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters
- ISO-12180-1 - Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form
- ISO-12180-2 - Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators
- ISO-12181-1 - Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness
- ISO-12181-2 - Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators
- ISO-12780-1 - Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness
- ISO-12780-2 - Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators
- ISO-12781-1 - Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness
- ISO-12781-2 - Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators
- ISO-1302 - Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation
- ISO-13565-1 - Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions
- ISO-13565-2 - Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
- ISO-13565-3 - Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve
- ISO-16610-1 - Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts
- ISO-16610-20 - Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts
- ISO-16610-21 - Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters
- ISO-16610-22 - Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters
- ISO-16610-28 - Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects
- ISO-16610-29 - Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: wavelets
- ISO-16610-30 - Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts
- ISO-16610-31 - Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters
- ISO-16610-32 - Geometrical product specifications (GPS) - Filtration - Part 32: Robust profile filters: Spline filters
- ISO-16610-40 - Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts
- ISO-16610-41 - Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters
- ISO-16610-49 - Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques
- ISO-16610-60 - Geometrical product specification (GPS) - Filtration - Part 60: Linear areal filters - Basic concepts
- ISO-16610-61 - Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters
- ISO-16610-61-AM1 - - Amendment 1
- ISO-16610-62 - Geometrical product specifications (GPS) - Filtration - Part 62: Linear areal filters: spline filters
- ISO-16610-71 - Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters
- ISO-16610-85 - Geometrical product specifications (GPS) - Filtration - Part 85: Morphological areal filters: Segmentation
- ISO-25178-1 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture
- ISO-25178-2 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters
- ISO-25178-3 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators
- ISO-25178-6 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture
- ISO-25178-600 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal topography measuring methods
- ISO-25178-601 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments
- ISO-25178-602 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
- ISO-25178-603 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
- ISO-25178-604 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
- ISO-25178-605 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
- ISO-25178-606 - Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments
- ISO-25178-607 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments
- ISO-25178-70 - Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures
- ISO-25178-700 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments
- ISO-25178-701 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments
- ISO-25178-71 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards
- ISO-25178-72 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p
- ISO-25178-72-AM1 - - Amendment 1
- ISO-4287 - Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
- ISO-4287/A1 - Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number
- ISO-4288 - Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture
- ISO-4291 - Methods for the assessement of departure from roundness - Measurement of variations in radius
- ISO-4292 - Methods for the assessment of departure from roundness - Measurement by two- and three-point methods
- ISO-8785 - Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters
Other SDOs:
- DIN-254 - Geometrical product specifications (GPS) - Conical tapers
- DIN-50992-1 - Part 1: Determination of Elastic Constants, Density & Thickness of Coatings Using Lase
- DIN-50992-2 - Part 2: Photothermal Thickness Measurement, Coating Thickness Measurement & Characteri
- DIN-EN-10049 - Measurement of roughness average Ra and peak count RPc on metallic flat products; German version EN 10049:2013
- DIN-EN-10318 - Determination of Thickness & Chemical Composition of Zinc- ALUMINIUM-Based Metallic Co
- DIN-EN-13036-4 - Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test
- DIN-EN-13523-21 - Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels; German version EN 13523-21:2017
- DIN-EN-13523-8 - Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog); German version EN 13523-8:2017
- DIN-EN-14571 - Metallic Coatings on Non-Metallic Basis Materials, Measurement of Coating Thickness -
- DIN-EN-15042-1 - Part 1: Guide To the Determination of Elastic Constants, Density & Thickness of Films
- DIN-EN-15042-2 - Part 2: Guide To the Thickness Measurement of Coatings by Photothermic Method, Thickne
- DIN-EN-ISO-1 - Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties
- DIN-EN-ISO-1101 - Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017); German version EN ISO 1101:2017
- DIN-EN-ISO-1119 - Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
- DIN-EN-ISO-1302 - Geometrical Product Specifications (Gps), Indication of Surface Texture in Technical P
- DIN-EN-ISO-21968 - Non-Magnetic Metallic Coatings on Metallic & Non-Metallic Basis Materials, Measurement
- DIN-EN-ISO-2808 - Paints & Varnishes - Determination of Film Thickness
- DIN-EN-ISO-3543 - Metallic & Non-Metallic Coatings, Measurement of Thickness - Beta Backscatter Method
- DIN-EN-ISO-5436-2 - Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012)
- DIN-EN-ISO-9013 - Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances
- DIN-ISO-9277 - Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
- EN-10049 - Measurement of roughness average Ra and peak count RPc on metallic flat products
- EN-10318 - Determination of Thickness & Chemical Composition of Zinc- & ALUMINIUM-Based Metallic
- EN-1071-6 - Advanced Technical Ceramics, Methods of Test for Ceramic Coatings, Determination of Th
- EN-13036-1 - Part 1: Measurement of Pavement Surface Macrotexture Depth Using a Volumetric Patch Te
- EN-13036-4 - Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
- EN-13523-1 - Coil coated metals - Test methods - Part 1: Film thickness
- EN-1370 - Founding - Examination of surface condition
- EN-14571 - Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics
- EN-15042-1 - Thickness Measurement of Coatings & Characterization of Surfaces Waves, Guide To the D
- EN-15042-2 - Thickness Measurement of Coatings & Characterization of Surfaces With Surface Waves, G
- EN-15302 - Railway Applications - Method for Determining the Equivalent Conicity
- EN-ISO-11562 - Geometrical Product Specifications (Gps), Surface Texture: Profile Method, Metrologica
- EN-ISO-12085 - Geometrical Product Specifications (Gps) - Surface Texture: Profile Method - Motif Pa
- EN-ISO-12180-1 - Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form
- EN-ISO-12180-2 - Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators
- EN-ISO-12181-1 - Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness
- EN-ISO-12181-2 - Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators
- EN-ISO-12780-1 - Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness
- EN-ISO-12781-1 - Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness
- EN-ISO-12781-2 - Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators
- EN-ISO-13565-3 - Part 3: Height Characterization Using the Material Probability Curve, Gps - Surface Te
- EN-ISO-16610-1 - Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts
- EN-ISO-16610-20 - Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts
- EN-ISO-16610-21 - Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
- EN-ISO-16610-22 - Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters
- EN-ISO-16610-29 - Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Spline wavelets
- EN-ISO-16610-30 - Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts
- EN-ISO-16610-31 - Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters
- EN-ISO-16610-40 - Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts
- EN-ISO-16610-41 - Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters
- EN-ISO-16610-49 - Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques
- EN-ISO-16610-61 - Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters
- EN-ISO-16610-71 - Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters
- EN-ISO-16610-85 - Geometrical product specifications (GPS) - Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013)
- EN-ISO-25178-2 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters
- EN-ISO-25178-3 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
- EN-ISO-25178-6 - Part 6: Classification of Methods for Measuring Surface Texture, Geometrical Product S
- EN-ISO-25178-600 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019)
- EN-ISO-25178-601 - Part 601: Nominal Characteristics of Contact (Stylus) Instruments, Geometrical Product
- EN-ISO-25178-602 - Part 602: Nominal Characteristics of Non-Contact (Confocal Chromatic Probe) Instrument
- EN-ISO-25178-604 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013)
- EN-ISO-25178-605 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014)
- EN-ISO-25178-606 - Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments
- EN-ISO-25178-607 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018)
- EN-ISO-25178-70 - Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014)
- EN-ISO-25178-701 - Part 701: Calibration & Measurement Standards for Contact (Stylus) Instruments, Geomet
- EN-ISO-25178-71 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards
- EN-ISO-25178-72 - Geometrical product specifications (GPS). Surface texture: Areal. XML file format x3p
- EN-ISO-3543 - Metallic & Non-Metallic Coatings, Measurement of Thickness -Beta Backscatter Method
- EN-ISO-4287 - Geometrical Product Specifications (Gps) - Surface Texture: Profile Method - Terms, D
- EN-ISO-4288 - Guide on the Safety of Multimedia Equipmentile Method: Rules & Proce
- EN-ISO-8401 - Metallic coatings - Review of methods of measurement of ductility
- JIS-B-0031 - Geometrical Product Specifications (GPS) -- Indication of surface texture in technical product documentation
- JIS-B-0031-AM1 - Geometrical Product Specifications (GPS) -- Indication of surface texture in technical product documentation (Amendment 1)
- JIS-B-0601 - Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters
- JIS-B-0610 - Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Definitions and designation of rolling circle waviness
- JIS-B-0631 - Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Motif parameters
- JIS-B-0632 - Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Metrological characteristics of phase correct filters
- JIS-B-0633 - Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture
- JIS-B-0651 - Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments
- JIS-B-0659-1 - Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 1: Material measures
- JIS-B-0670 - Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Calibration of contact (stylus) instruments
- JIS-B-0671-1 - Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 1: Filtering and general measurement conditions
- JIS-B-0671-1-AM1 - Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 1: Filtering and general measurement conditions (Amendment 1)
- JIS-B-0671-2 - Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve
- SIS-CEN/TR-17792 - Railway Applications - Wheel-rail contact geometry parameters - Technical report and background information about EN 15302
- SIS-CEN/TS-1071-9 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 9: Determination of fracture strain
- SIS-CEN/TS-16165 - Determination of slip resistance of pedestrian surfaces - Methods of evaluation
- SIS-ISO/TS-12180-1 - Geometrical Product Specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form
- SIS-ISO/TS-12180-2 - Geometrical Product Specifications (GPS) - Cylindricity - Part 2: Specification operators
- SIS-ISO/TS-12181-1 - Geometrical Product Specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness
- SIS-ISO/TS-12181-2 - Geometrical Product Specifications (GPS) - Roundness - Part 2: Specification operators
- SIS-ISO/TS-16610-1 - Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts
- SIS-ISO/TS-16610-20 - Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts
- SIS-ISO/TS-16610-22 - Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters
- SIS-ISO/TS-16610-29 - Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Spline wavelets
- SIS-ISO/TS-16610-30 - Geometrical product specification (GPS) - Filtration - Part 30: Robust profile filters: Basic Concepts
- SIS-ISO/TS-16610-31 - Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters
- SIS-ISO/TS-16610-32 - Geometrical product specifications (GPS) - Filtration - Part 32: Robust profile filters: Spline filters (ISO/TS 16610-32:2009, IDT)
- SIS-ISO/TS-16610-40 - Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts
- SIS-ISO/TS-16610-41 - Geometrical product specifications (GPS) -Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters
- SIS-ISO/TS-16610-49 - Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques
- SMS-Rapport-47 - Ytjämnhet - Nya parametrar, angivning på ritning och profildjupet H
- SMS-Rapport-55 - Geometriska produktspecifikationer (GPS)
- SS-EN-10049 - Measurement of roughness average Ra and peak count RPc on metallic flat products
- SS-EN-10318 - Determination of thickness and chemical composition of zinc-based metallic coatings - Routine method
- SS-EN-1071-6 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test
- SS-EN-13036-1 - Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
- SS-EN-13036-4 - Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
- SS-EN-13036-5 - Road and airfield surface characteristics - Test methods - Part 5: Determination of longitudinal unevenness indices
- SS-EN-13036-7 - Road and airfield surface characteristics - Test methods - Part 7: Irregularity measurement of pavement courses: the straightedge test
- SS-EN-13523-0 - Coil coated metals - Test methods - Part 0: General introduction
- SS-EN-13523-1 - Coil coated metals - Test methods - Part 1: Film thickness
- SS-EN-13523-13 - Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat
- SS-EN-13523-14 - Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
- SS-EN-13523-15 - Coil coated metals - Test methods - Part 15: Metamerism
- SS-EN-13523-18 - Coil coated metals - Test methods - Part 18: Resistance to staining
- SS-EN-13523-21 - Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
- SS-EN-13523-29 - Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
- SS-EN-13523-4 - Coil coated metals - Test methods - Part 4: Pencil hardness
- SS-EN-13523-5 - Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
- SS-EN-13523-6 - Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
- SS-EN-13523-7 - Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
- SS-EN-13523-8 - Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
- SS-EN-13523-9 - Coil coated metals - Test methods - Part 9: Resistance to water immersion
- SS-EN-1370 - Founding - Examination of surface condition
- SS-EN-14399-5 - High-strength structural bolting assemblies for preloading - Part 5: Plain washers
- SS-EN-14571 - Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method
- SS-EN-15042-1 - Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1: Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves
- SS-EN-15042-2 - Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method
- SS-EN-15302 - Railway applications - Wheel-rail contact geometry parameters - Definitions and methods for evaluation
- SS-EN-16165 - Determination of slip resistance of pedestrian surfaces - Methods of evaluation
- SS-EN-ISO-11562 - Geometrical product specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters (ISO 11562:1996/Cor 1:1998)
- SS-EN-ISO-11689 - Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996)
- SS-EN-ISO-12085 - Geometrical product specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996)
- SS-EN-ISO-12180-1 - Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
- SS-EN-ISO-12180-2 - Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
- SS-EN-ISO-12181-1 - Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
- SS-EN-ISO-12181-2 - Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
- SS-EN-ISO-12780-1 - Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
- SS-EN-ISO-12781-1 - Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
- SS-EN-ISO-12781-2 - Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
- SS-EN-ISO-1302 - Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002)
- SS-EN-ISO-13565-1 - Geometrical product specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996)
- SS-EN-ISO-13565-2 - Geometrical product specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996)
- SS-EN-ISO-13565-3 - Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998)
- SS-EN-ISO-16610-1 - Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015)
- SS-EN-ISO-16610-20 - Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts (ISO 16610-20:2015)
- SS-EN-ISO-16610-21 - Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
- SS-EN-ISO-16610-22 - Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO 16610-22:2015)
- SS-EN-ISO-16610-29 - Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Spline wavelets (ISO 16610-29:2015)
- SS-EN-ISO-16610-30 - Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015)
- SS-EN-ISO-16610-31 - Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
- SS-EN-ISO-16610-40 - Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015)
- SS-EN-ISO-16610-41 - Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015)
- SS-EN-ISO-16610-49 - Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015)
- SS-EN-ISO-16610-60 - Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015)
- SS-EN-ISO-16610-61 - Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015)
- SS-EN-ISO-16610-61-AM1 - Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)
- SS-EN-ISO-16610-62 - Geometrical product specifications (GPS) - Filtration - Part 62: Linear areal filters: Spline filters (ISO 16610-62:2023)
- SS-EN-ISO-16610-71 - Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014)
- SS-EN-ISO-16610-85 - Geometrical product specifications (GPS) - Filtration - Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013)
- SS-EN-ISO-21920-1 - Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021)
- SS-EN-ISO-21920-2 - Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021)
- SS-EN-ISO-24026-1 - Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24026-1:2020)
- SS-EN-ISO-24026-2 - Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24026-2:2020)
- SS-EN-ISO-25178-2 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
- SS-EN-ISO-25178-3 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
- SS-EN-ISO-25178-6 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010)
- SS-EN-ISO-25178-600 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019)
- SS-EN-ISO-25178-601 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
- SS-EN-ISO-25178-602 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
- SS-EN-ISO-25178-603 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013)
- SS-EN-ISO-25178-604 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013)
- SS-EN-ISO-25178-605 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014)
- SS-EN-ISO-25178-606 - Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015)
- SS-EN-ISO-25178-607 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2019)
- SS-EN-ISO-25178-70 - Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014)
- SS-EN-ISO-25178-700 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments (ISO 25178-700:2022)
- SS-EN-ISO-25178-701 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
- SS-EN-ISO-25178-71 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
- SS-EN-ISO-25178-72 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
- SS-EN-ISO-25178-72-AM1 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p - Amendment 1 (ISO 25178-72:2017/Amd 1:2020)
- SS-EN-ISO-26424 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test (ISO 26424:2008)
- SS-EN-ISO-3543 - Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000)
- SS-EN-ISO-4287 - Geometral Product Specifications (GSP) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997)
- SS-EN-ISO-4288 - Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996)
- SS-EN-ISO-4519 - Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes (ISO 4519:1980)
- SS-EN-ISO-8401 - Metallic coatings - Review of methods of measurement of ductility (ISO 8401:2017)
- SS-EN-ISO-8503-1 - Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012)
- SS-EN-ISO-8503-2 - Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012)
- SS-EN-ISO-8503-3 - Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure (ISO 8503-3:2012)
- SS-EN-ISO-8503-4 - Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012)
- SS-EN-ISO-8785 - Geometrical product specification (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998)
- SS-EN-ISO-9902-4 - Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001)
- SS-EN-ISO-9902-4-AM1 - Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 1 (ISO 9902-4:2001/Amd 1:2009)
- SS-EN-ISO-9902-5 - Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001)
- SS-EN-ISO-9902-5-AM1 - Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery - Amendment 1 (ISO 9902-5:2001/Amd 1:2009)
- SS-ISO-13565-3 - Geometrical Product Specification (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve
- SS-ISO-1726 - Road vehicles - Mechanical coupling between tractors and semi-trailers - Interchangeability (ISO 1726-1:2000, IDT)
- SS-ISO-2632-1 - Roughness comparison specimens - Part 1: Turned, ground, bored, milled, shaped and planed
- SS-ISO-2632-2 - Roughness comparison specimens - Part 2: Spark-eroded, shot-blasted and grit-blasted, and polished
- SS-ISO-4287-1 - Surface roughness - Terminology - Part 1: Surfaceand its parameters
- SS-ISO-4287-2 - Surface roughness - Terminology - Part 2: Measurement of surface roughness parameters
- SS-ISO-4288 - Rules and procedures for the measurement of surface roughness using stylus instruments
- SS-ISO-4516 - Metallic and related coatings - Vickers and Knoopmicrohardness tests
- SS-ISO-4519 - Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes
- SS-ISO-468 - Surface roughness - Parameters, their values and general rules for specifying requirements
- SS-ISO-5436 - Calibration specimens - Stylus instruments - Types, calibration and use of specimens
- SS-ISO-8401 - Metallic coatings - Review of methods of measurement of ductility
- SS-ISO-8502-2 - Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces
- SS-ISO-8502-3 - Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
- SS-ISO-8502-4 - Preparation of steel substrates before application of paints and related products - Test for the assessment of surface cleanliness - Part 4: Guidanceon the estimation of the probability of condensation prior to paint application
- SS-ISO-8503-1 - Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
- SS-ISO-8503-2 - Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
- SS-ISO-8503-3 - Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for calibration of ISO surfaceprofile comparators and for the determination of surface
- SS-ISO-8503-4 - Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for calibration of ISO surfaceprofile comparators and for the determination of surface
- SS-ISO-8504-1 - Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles
- SS-ISO-8504-2 - Preparartion of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning
- SS-ISO-8504-3 - Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning
- SS-ISO-8785 - Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters
- SS-ISO-TR-8502-1 - Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 1: Field test for soluble iron corrosion products
- UNE-EN-ISO-25178-1 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture
- UNI-EN-10049 - Measurement Of Roughness Average Ra And Peak Count Rpc On Metallic Flat Products