Document Center List of Standards on Optical Equipment Including Microscopes, Telescopes, Binoculars, Optical Materials, Optical Components And Optical Systems Ophthalmic Equipment, See 11.040.70 Optical Measuring Instruments, See 17.180.30 Photographic Equipment Lenses, See 37.040.10
ICS Code 37.020
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-C1661 - Standard Guide for Viewing Systems for Remotely Operated Facilities
- ASTM-E175 - Standard Terminology of Microscopy (Withdrawn 2019)
- ASTM-E1791 - Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry
- ASTM-E1951 - Standard Guide for Calibrating Reticles and Light Microscope Magnifications
- ASTM-E210 - Standard Specification for Microscope Objective Thread (Withdrawn 2022)
- ASTM-E211 - Standard Specification for Cover Glasses and Glass Slides for Use in Microscopy
- ASTM-E2228 - Standard Guide for Microscopical Examination of Textile Fibers
- ASTM-E2642 - Standard Terminology for Scientific Charge-Coupled Device (CCD) Detectors
- ASTM-E766 - Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
- ASTM-E986 - Standard Practice for Scanning Electron Microscope Beam Size Characterization
- ASTM-F1048 - Standard Test Method for Measuring the Effective Surface Roughness of Optical Components by Total Integrated Scattering (Withdrawn 2003)
- ASTM-F1863 - Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts
- ASTM-F490 - Method for Microscopical Sizing and Counting Particles on Membrane Filters Using Image Shear (Withdrawn 1992)
- ASTM-F728 - Standard Practice for Preparing An Optical Microscope for Dimensional Measurements (Withdrawn 2003)
BSI:
- BS-3836-1 - Specification for components of microscopes. Microscope cover slips and slides and immersion fluid
- BS-5109 - Glossary of terms used in assessing the performance of optical devices and systems
- BS-7011-0 - Consumable accessories for light microscopes.
- BS-7011-1-1.1 - Consumable accessories for light microscopes. Immersion oils. Specification for immersion oils for general use
- BS-7011-2.1 - Consumable accessories for light microscopes. Slides.
- BS-7011-3.2 - Consumable accessories for light microscopes. Cover glasses. Specification for materials and quality of finish
- BS-7012-0 - Light microscopes
- BS-7012-1 - Light microscopes. Specification for the magnifying power of microscope imaging components
- BS-7012-10.2 - Light Microscopes, Minimum Requirements for Stereo Microscopes, High Performance Micro
- BS-7012-10.4 - Light microscopes. Minimum requirements for stereo microscopes. Information provided to the user
- BS-7012-11 - Light microscopes. Information provided to the user
- BS-7012-13 - Light microscopes
- BS-7012-14 - Light microscopes
- BS-7012-15 - Light microscopes. Marking of objectives and eyepieces
- BS-7012-16 - Light microscopes
- BS-7012-3 - Light microscopes. Imaging distances related to mechanical reference planes for tube length 160 mm
- BS-7012-9 - Specification for Interfacing Connection Type C
- BS-EN-ISO-13696 - Optics and photonics. Test method for total scattering by optical components
- BS-ISO-10109 - Optics and photonics. Guidance for the selection of environmental tests
- BS-ISO-10109-1 - Optics and photonics. Environmental requirements
- BS-ISO-10109-11 - Optics and optical instruments. Environmental requirements
- BS-ISO-10109-12 - Optics and optical instruments. Environmental requirements
- BS-ISO-10109-4 - Optics and optical instruments. Environmental requirements
- BS-ISO-10109-6 - Optics and photonics. Environmental requirements
- BS-ISO-10109-8 - Optics and photonics. Environmental requirements
- BS-ISO-10110-1 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-10 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-11 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-11-TC - Tracked Changes. Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-12 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-13 - Optics and optical instruments. Preparation of drawings for optical elements and systems. Laser irradiation damage threshold
- BS-ISO-10110-14 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-14-TC - Tracked Changes. Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-16 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-17 - Optics and optical instruments. Preparation of drawings for optical elements and systems
- BS-ISO-10110-18 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-19 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-4 - Optics and optical instruments. Preparation of drawings for optical elements and systems
- BS-ISO-10110-5 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-6 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-6-TC - Tracked Changes. Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-7 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-7-TC - Tracked Changes. Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-9 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-9-TC - Tracked Changes. Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10934 - Microscopes. Vocabulary for light microscopy
- BS-ISO-10934-2 - Optics and optical instruments. Vocabulary for microscopy
- BS-ISO-10935 - Microscopes. Interfacing connection type C
- BS-ISO-10936-1 - Optics and photonics. Operation microscopes
- BS-ISO-10936-1-TC - Tracked Changes. Optics and photonics. Operation microscopes
- BS-ISO-10936-2 - Optics and photonics. Operation microscopes
- BS-ISO-11421 - Optics and optical instruments. Accuracy of optical transfer function (OTF) measurement
- BS-ISO-11807-1 - Integrated optics. Vocabulary
- BS-ISO-11807-2 - Integrated optics. Vocabulary
- BS-ISO-11884-1 - Optics and photonics. Minimum requirements for stereomicroscopes
- BS-ISO-11884-2 - Optics and photonics. Minimum requirements for stereomicroscopes
- BS-ISO-12853 - Microscopes. Information provided to the user
- BS-ISO-14132-1 - Optics and photonics. Vocabulary for telescopic systems
- BS-ISO-14132-2 - Optics and photonics. Vocabulary for telescopic systems
- BS-ISO-14132-3 - Optics and photonics. Vocabulary for telescopic systems
- BS-ISO-14132-5 - Optics and photonics. Vocabulary for telescopic systems
- BS-ISO-14133-1 - Optics and photonics. Specifications for binoculars, monoculars and spotting scopes
- BS-ISO-14133-2 - Optics and photonics. Specifications for binoculars, monoculars and spotting scopes
- BS-ISO-14134 - Optics and optical instruments. Specifications for astronomical telescopes
- BS-ISO-14135-1 - Optics and photonics. Specifications for telescopic sights
- BS-ISO-14135-2 - Optics and photonics. Specifications for telescopic sights
- BS-ISO-14490-1 - Optics and optical instruments. Test methods for telescopic systems
- BS-ISO-14490-2 - Optics and optical instruments. Test methods for telescopic systems
- BS-ISO-14490-3 - Optics and photonics. Test methods for telescopic systems
- BS-ISO-14490-4 - Optics and optical instruments. Test methods for telescopic systems
- BS-ISO-14490-5 - Optics and photonics. Test methods for telescopic systems
- BS-ISO-14490-5-TC - Tracked Changes. Optics and photonics. Test methods for telescopic systems
- BS-ISO-14490-6 - Optics and photonics. Test methods for telescopic systems
- BS-ISO-14490-7 - Optics and photonics. Test methods for telescopic systems
- BS-ISO-14490-8 - Optics and optical instruments. Test methods for telescopic systems
- BS-ISO-14490-9 - Optics and photonics. Test methods for telescopic systems
- BS-ISO-14880-1 - Microlens array. Vocabulary
- BS-ISO-14997 - Optics and photonics. Test methods for surface imperfections of optical elements
- BS-ISO-14997-TC - Tracked Changes. Optics and photonics. Test methods for surface imperfections of optical elements
- BS-ISO-14999-4 - Optics and photonics. Interferometric measurement of optical elements and optical systems
- BS-ISO-14999-4-TC - Tracked Changes. Optics and photonics. Interferometric measurement of optical elements and optical systems
- BS-ISO-15227 - Optics and optical instruments. Microscopes. Testing of stereomicroscopes
- BS-ISO-15362 - Stereomicroscopes. Information provided to the user
- BS-ISO-15368-TC - Tracked Changes. Optics and photonics. Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
- BS-ISO-15795 - Optics and photonics. Quality evaluation of optical systems. Assessing the image quality degradation due to chromatic aberrations
- BS-ISO-16700 - Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification
- BS-ISO-16700-TC - Tracked Changes. Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification
- BS-ISO-17328 - Optics and photonics. Optical materials and components. Test method for refractive index of infrared optical materials
- BS-ISO-17328-TC - Tracked Changes. Optics and photonics. Optical materials and components. Test method for refractive index of infrared optical materials
- BS-ISO-17411 - Optics and photonics. Optical materials and components. Test method for homogeneity of optical glasses by laser interferometry
- BS-ISO-18221 - Microscopes. Microscopes with digital imaging displays. Information provided to the user regarding imaging performance
- BS-ISO-19012-1 - Microscopes. Designation of microscope objectives
- BS-ISO-19012-2 - Microscopes. Designation of microscope objectives
- BS-ISO-19012-3 - Microscopes. Designation of microscope objectives
- BS-ISO-19055 - Microscopes. Minimum requirements for binocular tubes
- BS-ISO-19056-1 - Microscopes. Definition and measurement of illumination properties
- BS-ISO-19056-2 - Microscopes. Definition and measurement of illumination properties
- BS-ISO-19056-3 - Microscopes. Definition and measurement of illumination properties
- BS-ISO-19740 - Optics and photonics. Optical materials and components. Test method for homogeneity of infrared optical materials
- BS-ISO-19741 - Optics and photonics. Optical materials and components. Test method for striae in infrared optical materials
- BS-ISO-19742 - Optics and photonics. Optical materials and components. Test method for bubbles and inclusions in infrared optical materials
- BS-ISO-20263 - Microbeam analysis. Analytical electron microscopy. Method for the determination of interface position in the cross-sectional image of the layered materials
- BS-ISO-20473 - Optics and photonics. Spectral bands
- BS-ISO-20711 - Optics and photonics. Environmental requirements. Test requirements for telescopic systems
- BS-ISO-21073 - Microscopes. Confocal microscopes. Optical data of fluorescence confocal microscopes for biological imaging
- BS-ISO-21094 - Optics and photonics. Telescopic systems. Specifications for night vision devices
- BS-ISO-21395-1 - Optics and photonics. Test method for refractive index of optical glasses
- BS-ISO-21395-2 - Optics and photonics. Test method for refractive index of optical glasses
- BS-ISO-21466 - Microbeam analysis. Scanning electron microscopy. Method for evaluating critical dimensions by CDSEM
- BS-ISO-21575 - Optics and photonics. Optical materials and components. The powder test method for the water resistance of optical glass
- BS-ISO-22493 - Microbeam analysis. Scanning electron microscopy. Vocabulary
- BS-ISO-22531 - Optics and photonics. Optical materials and components. Test method for climate resistance of optical glass
- BS-ISO-22576 - Optics and photonics. Optical materials and components. Specification of calcium fluoride used in the infrared spectrum
- BS-ISO-23364 - Optics and Photonics. Bulk absorption optical filters
- BS-ISO-23584-1 - Optics and photonics. Specification of reference dictionary
- BS-ISO-23584-2 - Optics and photonics. Specification of reference dictionary
- BS-ISO-25297-1 - Optics and photonics. Electronic exchange of optical data
- BS-ISO-25297-2 - Optics and photonics. Electronic exchange of optical data
- BS-ISO-8036 - Microscopes. Immersion liquids for light microscopy
- BS-ISO-8036-TC - Tracked Changes. Microscopes. Immersion liquids for light microscopy
- BS-ISO-8038 - Microscopes. Screw threads for objectives and related nosepieces
- BS-ISO-8038-2 - Optics and optical instruments. Screw threads for microscope objectives and related nosepiecesScrew thread type M25 x 0,75 mm
- BS-ISO-8039 - Microscopes. Values, tolerances and symbols for magnification
- BS-ISO-8039-TC - Tracked Changes. Microscopes. Values, tolerances and symbols for magnification
- BS-ISO-8040 - Optics and optical instruments. Microscopes. Dimensions of tube slide and tube slot connections
- BS-ISO-8255-1 - Microscopes. Cover glasses
- BS-ISO-8255-1-TC - Tracked Changes. Microscopes. Cover glasses
- BS-ISO-8255-2 - Microscopes. Cover glasses
- BS-ISO-8578 - Microscopes. Marking of objectives and eyepieces
- BS-ISO-8600-5 - Optics and photonics. Medical endoscopes and endotherapy devices
- BS-ISO-8600-6 - Endoscopes. Medical endoscopes and endotherapy devices
- BS-ISO-9022-1 - Optics and photonics. Environmental test methods
- BS-ISO-9022-10 - Optics and optical instruments. Environmental test methods. Combined sinusoidal vibration and dry heat or cold
- BS-ISO-9022-11 - Optics and photonics. Environmental test methods
- BS-ISO-9022-12 - Optics and photonics. Environmental test methods
- BS-ISO-9022-12-TC - Tracked Changes. Optics and photonics. Environmental test methods
- BS-ISO-9022-13 - Optics and optical instruments. Environmental test methods. Combined shock, bump or free fall and dry heat or cold
- BS-ISO-9022-14 - Optics and photonics. Environmental test methods
- BS-ISO-9022-15 - Optics and optical instruments. Environmental test methods. Combined digitally controlled broad-band random vibration and dry heat or cold
- BS-ISO-9022-16 - Optics and optical instruments. Environmental test methods. Combined bounce or steady-state acceleration and dry heat or cold
- BS-ISO-9022-17 - Optics and photonics. Environmental test methods
- BS-ISO-9022-18 - Optics and optical instruments. Environmental test methods. Combined damp heat and low internal pressure
- BS-ISO-9022-19 - Optics and optical instruments. Environmental test methods. Temperature cycles combined with sinusoidal or random vibration
- BS-ISO-9022-1-TC - Tracked Changes. Optics and photonics. Environmental test methods
- BS-ISO-9022-2 - Optics and photonics. Environmental test methods
- BS-ISO-9022-20 - Optics and photonics. Environmental test methods
- BS-ISO-9022-21 - Optics and optical instruments. Environmental test methods. Combined low pressure and ambient temperature or dry heat
- BS-ISO-9022-22 - Optics and photonics. Environmental test methods
- BS-ISO-9022-23 - Optics and photonics. Environmental test methods
- BS-ISO-9022-23-TC - Tracked Changes. Optics and photonics. Environmental test methods. Low pressure combined with cold, ambient temperature and dry or damp heat.
- BS-ISO-9022-2-TC - Tracked Changes. Optics and photonics. Environmental test methods
- BS-ISO-9022-3 - Optics and photonics. Environmental test methods
- BS-ISO-9022-3-TC - Tracked Changes. Optics and photonics. Environmental test methods
- BS-ISO-9022-4 - Optics and photonics. Environmental test methods
- BS-ISO-9022-5 - Optics and optical instruments. Environmental test methods. Combined cold, low air pressure
- BS-ISO-9022-6 - Optics and photonics. Environmental test methods
- BS-ISO-9022-7 - Optics and photonics. Environmental test methods
- BS-ISO-9022-8 - Optics and photonics. Environmental test methods
- BS-ISO-9022-9 - Optics and photonics. Environmental test methods
- BS-ISO-9039 - Optics and photonics. Quality evaluation of optical systems. Determination of distortion
- BS-ISO-9211-1 - Optics and photonics. Optical coatings
- BS-ISO-9211-1-TC - Tracked Changes. Optics and photonics. Optical coatings
- BS-ISO-9211-2 - Optics and photonics. Optical coatings
- BS-ISO-9211-3 - Optics and photonics. Optical coatings
- BS-ISO-9211-4 - Optics and photonics. Optical coatings
- BS-ISO-9211-4-TC - Tracked Changes. Optics and photonics. Optical coatings
- BS-ISO-9211-6 - Optics and photonics. Optical coatings
- BS-ISO-9211-7 - Optics and photonics. Optical coatings
- BS-ISO-9211-7-TC - Tracked Changes. Optics and photonics. Optical coatings
- BS-ISO-9211-8 - Optics and photonics. Optical coatings
- BS-ISO-9336-2 - Optics and optical instruments. Application. Optical transfer function. Lenses for office copiers
- BS-ISO-9336-3-TC - Tracked Changes. Optics and photonics. Optical transfer function. Application
- BS-ISO-9344 - Microscopes. Graticules for eyepieces
- BS-ISO-9345 - Microscopes. Interfacing dimensions for imaging components
- BS-ISO-9345-1 - Microscopes. Imaging distances related to mechanical reference planes
- BS-ISO-9345-2 - Microscopes. Imaging distances related to mechanical reference planes
- PD-ISO-14999-1 - Optics and photonics. Interferometric measurement of optical elements and optical systems
- PD-ISO-14999-2 - Optics and photonics. Interferometric measurement of optical elements and optical systems
- PD-ISO-14999-3 - Optics and photonics. Interferometric measurement of optical elements and optical systems
- PD-ISO-16743 - Optics and photonics. Wavefront sensors for characterising optical systems and optical components
- PD-ISO-21477 - Optics and photonics. Preparation of drawings for optical elements and systems. Surface imperfection specification and measurement systems
IEC:
- IEC-61947-1 - Electronic projection - Measurement and documentation of key performance criteria - Part 1: Fixed resolution projectors
- IEC-61947-2 - Electronic projection - Measurement and documentation of key performance criteria - Part 2: Variable resolution projectors
ISO:
- ISO-10109 - Optics and photonics - Guidance for the selection of environmental tests
- ISO-10109-1 - Optics and photonics - Environmental requirements - Part 1: General overview, terms and definitions, climatic zones and their parameters
- ISO-10109-11 - Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use
- ISO-10109-12 - Optics and optical instruments - Environmental requirements - Part 12: Conditions of transport for optical instruments
- ISO-10109-4 - Optics and optical instruments - Environmental requirements - Part 4: Test requirements for telescopic systems
- ISO-10109-6 - Optics and photonics - Environmental requirements - Part 6: Test requirements for medical optical instruments
- ISO-10109-7 - Optics and optical instruments -- Environmental requirements -- Part 7: Test requirements for optical measuring instruments
- ISO-10109-8 - Optics and photonics - Environmental requirements - Part 8: Test requirements for extreme conditions of use
- ISO-10110-1 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 1: General
- ISO-10110-10 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 10: Table representing data of optical elements and cemented assemblies
- ISO-10110-11 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 11: Non-toleranced data
- ISO-10110-12 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 12: Aspheric surfaces
- ISO-10110-12-AM1 - - Amendment 1
- ISO-10110-13 - Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 13: Laser irradiation damage threshold
- ISO-10110-14 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance
- ISO-10110-16 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 16: Diffractive surfaces
- ISO-10110-17 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 17: Laser irradiation damage threshold
- ISO-10110-18 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 18: Stress birefringence, bubbles and inclusions, homogeneity, and striae
- ISO-10110-19 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 19: General description of surfaces and components
- ISO-10110-2 - Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 2: Material imperfections -- Stress birefringence
- ISO-10110-3 - Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 3: Material imperfections -- Bubbles and inclusions
- ISO-10110-4 - Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 4: Material imperfections -- Inhomogeneity and striae
- ISO-10110-5 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances
- ISO-10110-6 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 6: Centring tolerances
- ISO-10110-7 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 7: Surface imperfections
- ISO-10110-8 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 8: Surface texture
- ISO-10110-9 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating
- ISO-10934 - Microscopes - Vocabulary for light microscopy
- ISO-10934-1 - Optics and optical instruments - Vocabulary for microscopy - Part 1: Light microscopy
- ISO-10934-2 - Optics and optical instruments - Vocabulary for microscopy - Part 2: Advanced techniques in light microscopy
- ISO-10935 - Microscopes - Interfacing connection type C
- ISO-10936-1 - Optics and photonics - Operation microscopes - Part 1: Requirements and test methods
- ISO-10936-2 - Optics and photonics - Operation microscopes - Part 2: Light hazard from operation microscopes used in ocular surgery
- ISO-10937 - Optics and optical instruments -- Microscopes -- Diameter of interchangeable eyepieces
- ISO-11382 - Optics and photonics - Optical materials and components - Characterization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm
- ISO-11882 - Optics and optical instruments -- Microscopes -- Interfacing connection for 35 mm SLR photo cameras (T-thread adaptation)
- ISO-11883 - Optics and optical instruments -- Microscopes -- Marking of stereomicroscopes
- ISO-11884-1 - Optics and photonics - Minimum requirements for stereomicroscopes - Part 1: Stereomicroscopes for general use
- ISO-11884-2 - Optics and photonics - Minimum requirements for stereomicroscopes - Part 2: High performance microscopes
- ISO-12853 - Microscopes - Information provided to the user
- ISO-13695 - Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers
- ISO-14132-1 - Optics and photonics - Vocabulary for telescopic systems - Part 1: General terms and alphabetical indexes of terms in ISO 14132
- ISO-14132-2 - Optics and photonics - Vocabulary for telescopic systems - Part 2: Terms for binoculars, monoculars and spotting scopes
- ISO-14132-3 - Optics and photonics - Vocabulary for telescopic systems - Part 3: Terms for telescopic sights
- ISO-14132-4 - Optics and photonics - Vocabulary for telescopic systems - Part 4: Terms for astronomical telescopes
- ISO-14132-5 - Optics and photonics - Vocabulary for telescopic systems - Part 5: Terms for night vision devices
- ISO-14133-1 - Optics and photonics - Specifications for binoculars, monoculars and spotting scopes - Part 1: General purpose instruments
- ISO-14133-2 - Optics and photonics - Specifications for binoculars, monoculars and spotting scopes - Part 2: High performance instruments
- ISO-14134 - Optics and optical instruments - Specifications for astronomical telescopes
- ISO-14135-1 - Optics and photonics - Specifications for telescopic sights - Part 1: General-purpose instruments
- ISO-14135-2 - Optics and photonics - Specifications for telescopic sights - Part 2: High-performance instruments
- ISO-14490-1 - Optics and optical instruments - Test methods for telescopic systems - Part 1: Test methods for basic characteristics
- ISO-14490-10 - Optics and photonics - Test methods for telescopic systems - Part 10: Test methods for axial colour performance
- ISO-14490-2 - Optics and optical instruments - Test methods for telescopic systems - Part 2: Test methods for binocular systems
- ISO-14490-3 - Optics and photonics - Test methods for telescopic systems - Part 3: Test methods for telescopic sights
- ISO-14490-4 - Optics and optical instruments - Test methods for telescopic systems - Part 4: Test methods for astronomical telescopes
- ISO-14490-5 - Optics and photonics - Test methods for telescopic systems - Part 5: Test methods for transmittance
- ISO-14490-5-AM1 - - Amendment 1
- ISO-14490-6 - Optics and photonics - Test methods for telescopic systems - Part 6: Test methods for veiling glare index
- ISO-14490-7 - Optics and photonics - Test methods for telescopic systems - Part 7: Test methods for limit of resolution
- ISO-14490-8 - Optics and optical instruments - Test methods for telescopic systems - Part 8: Test methods for night-vision devices
- ISO-14490-9 - Optics and photonics - Test methods for telescopic systems - Part 9: Test methods for field curvature
- ISO-14997 - Optics and photonics - Test methods for surface imperfections of optical elements
- ISO-14997-2 - Optics and photonics - Test methods for surface imperfections of optical elements - Part 2: Machine vision
- ISO-14999-1 - Optics and photonics - Interferometric measurement of optical elements and optical systems - Part 1: Terms, definitions and fundamental relationships
- ISO-14999-2 - Optics and photonics - Interferometric measurement of optical elements and optical systems - Part 2: Measurement and evaluation techniques
- ISO-14999-3 - Optics and photonics - Interferometric measurement of optical elements and optical systems - Part 3: Calibration and validation of interferometric test equipment and measurements
- ISO-14999-4 - Optics and photonics - Interferometric measurement of optical elements and optical systems - Part 4: Interpretation and evaluation of tolerances specified in ISO 10110
- ISO-15227 - Optics and optical instruments -- Microscopes -- Testing of stereomicroscopes
- ISO-15362 - Stereomicroscopes - Information provided to the user
- ISO-15795 - Optics and optical instruments - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations
- ISO-15932 - Microbeam analysis - Analytical electron microscopy - Vocabulary
- ISO-16700 - Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification
- ISO-16743 - Optics and photonics - Wavefront sensors for characterising optical systems and optical components
- ISO-17328 - Optics and photonics - Optical materials and components - Test method for refractive index of infrared optical materials
- ISO-17411 - Optics and photonics - Optical materials and components - Test method for homogeneity of optical glasses by laser interferometry
- ISO-18221 - Microscopes - Microscopes with digital imaging displays - Information provided to the user regarding imaging performance
- ISO-19012-1 - Microscopes - Designation of microscope objectives - Part 1: Flatness of field/Plan
- ISO-19012-2 - Microscopes - Designation of microscope objectives - Part 2: Chromatic correction
- ISO-19012-3 - Microscopes - Designation of microscope objectives - Part 3: Spectral transmittance
- ISO-19055 - Microscopes - Minimum requirements for binocular tubes
- ISO-19056-1 - Microscopes - Definition and measurement of illumination properties - Part 1: Image brightness and uniformity in bright field microscopy
- ISO-19056-2 - Microscopes - Definition and measurement of illumination properties - Part 2: Illumination properties related to the colour in bright field microscopy
- ISO-19056-3 - Microscopes - Definition and measurement of illumination properties - Part 3: Incident light fluorescence microscopy with incoherent light sources
- ISO-19740 - Optics and photonics - Optical materials and components - Test method for homogeneity of infrared optical materials
- ISO-19741 - Optics and photonics - Optical materials and components - Test method for striae in infrared optical materials
- ISO-19742 - Optics and photonics - Optical materials and components - Test method for bubbles and inclusions in infrared optical materials
- ISO-20263 - Microbeam analysis - Analytical electron microscopy - Method for the determination of interface position in the cross-sectional image of the layered materials
- ISO-20473 - Optics and photonics - Spectral bands
- ISO-20711 - Optics and photonics - Environmental requirements - Test requirements for telescopic systems
- ISO-21073 - Microscopes - Confocal microscopes - Optical data of fluorescence confocal microscopes for biological imaging
- ISO-21094 - Optics and photonics - Telescopic systems - Specifications for night vision devices
- ISO-21383 - Microbeam analysis - Scanning electron microscopy - Qualification of the scanning electron microscope for quantitative measurements
- ISO-21395-2 - Optics and photonics - Test method for refractive index of optical glasses - Part 2: V-block refractometer method
- ISO-21466 - Microbeam analysis - Scanning electron microscopy - Method for evaluating critical dimensions by CD-SEM
- ISO-21477 - Optics and photonics - Preparation of drawings for optical elements and systems - Surface imperfection specification and measurement systems
- ISO-21575 - Optics and photonics - Optical materials and components - The powder test method for the water resistance of optical glass
- ISO-22493 - Microbeam analysis - Scanning electron microscopy - Vocabulary
- ISO-22531 - Optics and photonics - Optical materials and components - Test method for climate resistance of optical glass
- ISO-22576 - Optics and photonics - Optical materials and components - Specification of calcium fluoride used in the infrared spectrum
- ISO-23364 - Optics and Photonics - Bulk absorption optical filters
- ISO-23584-1 - Optics and photonics - Specification of reference dictionary - Part 1: General overview on organization and structure
- ISO-23584-2 - Optics and photonics - Specification of reference dictionary - Part 2: Classes and properties definitions
- ISO-24597 - Microbeam analysis - Scanning electron microscopy - Methods of evaluating image sharpness
- ISO-25297-1 - Optics and photonics - Electronic exchange of optical data - Part 1: NODIF information model
- ISO-25297-2 - Optics and photonics - Electronic exchange of optical data - Part 2: Mapping to the classes and properties defined in ISO 23584
- ISO-29301 - Microbeam analysis - Analytical electron microscopy - Methods for calibrating image magnification by using reference materials with periodic structures
- ISO-8036 - Microscopes - Immersion liquids for light microscopy
- ISO-8036-RL - Microscopes - Immersion liquids for light microscopy (includes Redline Version)
- ISO-8037-1 - Optics and optical instruments -- Microscopes -- Slides -- Part 1: Dimensions, optical properties and marking
- ISO-8037-2 - Optics and optical instruments -- Microscopes -- Slides -- Part 2: Quality of material, standards of finish and mode of packaging
- ISO-8038 - Microscopes - Screw threads for objectives and related nosepieces
- ISO-8039 - Microscopes - Values, tolerances and symbols for magnification
- ISO-8040 - Optics and optical instruments -- Microscopes -- Dimensions of tube slide and tube slot connections
- ISO-8255-1 - Microscopes - Cover glasses - Part 1: Dimensional tolerances, thickness and optical properties
- ISO-8255-2 - Microscopes - Cover glasses - Part 2: Quality of materials, standards of finish and mode of packaging
- ISO-8576 - Optics and optical instruments -- Microscopes -- Reference system of polarized light microscopy
- ISO-8577 - Optics and optical instruments -- Microscopes -- Spectral filters
- ISO-8578 - Microscopes - Marking of objectives and eyepieces
- ISO-8600-5 - Optics and photonics - Medical endoscopes and endotherapy devices - Part 5: Determination of optical resolution of rigid endoscopes with optics
- ISO-8600-6 - Endoscopes - Medical endoscopes and endotherapy devices - Part 6: Vocabulary
- ISO-9022-1 - Optics and photonics - Environmental test methods - Part 1: Definitions, extent of testing
- ISO-9022-10 - Optics and optical instruments -- Environmental test methods -- Part 10: Combined sinusoidal vibration and dry heat or cold
- ISO-9022-11 - Optics and photonics - Environmental test methods - Part 11: Mould growth
- ISO-9022-12 - Optics and photonics - Environmental test methods - Part 12: Contamination
- ISO-9022-12-RL - Optics and photonics - Environmental test methods - Part 12: Contamination (includes Redline Version)
- ISO-9022-13 - Optics and optical instruments -- Environmental test methods -- Part 13: Combined shock, bump or free fall and dry heat or cold
- ISO-9022-14 - Optics and photonics - Environmental test methods - Part 14: Dew, hoarfrost, ice
- ISO-9022-14-RL - Optics and photonics - Environmental test methods - Part 14: Dew, hoarfrost, ice (includes Redline Version)
- ISO-9022-15 - Optics and optical instruments -- Environmental test methods -- Part 15: Combined digitally controlled broad-band random vibration and dry heat or cold
- ISO-9022-16 - Optics and optical instruments -- Environmental test methods -- Part 16: Combined bounce or steady-state acceleration and dry heat or cold
- ISO-9022-17 - Optics and photonics - Environmental test methods - Part 17: Combined contamination, solar radiation
- ISO-9022-17-RL - Optics and photonics - Environmental test methods - Part 17: Combined contamination, solar radiation (includes Redline Version)
- ISO-9022-18 - Optics and optical instruments -- Environmental test methods -- Part 18: Combined damp heat and low internal pressure
- ISO-9022-19 - Optics and optical instruments -- Environmental test methods -- Part 19: Temperature cycles combined with sinusoidal or random vibration
- ISO-9022-2 - Optics and photonics - Environmental test methods - Part 2: Cold, heat and humidity
- ISO-9022-20 - Optics and photonics - Environmental test methods - Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide
- ISO-9022-20-RL - Optics and photonics - Environmental test methods - Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide (includes Redline Version)
- ISO-9022-21 - Optics and optical instruments -- Environmental test methods -- Part 21: Combined low pressure and ambient temperature or dry heat
- ISO-9022-22 - Optics and photonics - Environmental test methods - Part 22: Combined cold, dry heat or temperature change with bump or random vibration
- ISO-9022-23 - Optics and photonics - Environmental test methods - Part 23: Low pressure combined with cold, ambient temperature and dry or damp heat
- ISO-9022-2-AM1 - - Amendment 1: Optics and photonics - Environmental test methods - Part 2: Cold, heat and humidity - Amendment 1
- ISO-9022-2-RL - Optics and photonics - Environmental test methods - Part 2: Cold, heat and humidity (includes Redline Version)
- ISO-9022-3 - Optics and photonics - Environmental test methods - Part 3: Mechanical stress
- ISO-9022-3-AM1 - - Amendment 1
- ISO-9022-3-RL - Optics and photonics - Environmental test methods - Part 3: Mechanical stress (includes Redline Version)
- ISO-9022-4 - Optics and photonics - Environmental test methods - Part 4: Salt mist
- ISO-9022-4-AM1 - - Amendment 1: Optics and photonics - Environmental test methods - Part 4: Salt mist - Amendment 1
- ISO-9022-5 - Optics and optical instruments -- Environmental test methods -- Part 5: Combined cold, low air pressure
- ISO-9022-6 - Optics and photonics - Environmental test methods - Part 6: Dust
- ISO-9022-6-RL - Optics and photonics - Environmental test methods - Part 6: Dust (includes Redline Version)
- ISO-9022-7 - Optics and photonics - Environmental test methods - Part 7: Resistance to drip or rain
- ISO-9022-7-RL - Optics and photonics - Environmental test methods - Part 7: Resistance to drip or rain (includes Redline Version)
- ISO-9022-8 - Optics and photonics - Environmental test methods - Part 8: High internal pressure, low internal pressure, immersion
- ISO-9022-8-RL - Optics and photonics - Environmental test methods - Part 8: High internal pressure, low internal pressure, immersion (includes Redline Version)
- ISO-9022-9 - Optics and photonics - Environmental test methods - Part 9: Solar radiation and weathering
- ISO-9039 - Optics and photonics - Quality evaluation of optical systems - Determination of distortion
- ISO-9211-1 - Optics and photonics - Optical coatings - Part 1: Vocabulary
- ISO-9211-2 - Optics and photonics - Optical coatings - Part 2: Optical properties
- ISO-9211-3 - Optics and photonics - Optical coatings - Part 3: Environmental durability
- ISO-9211-4 - Optics and photonics - Optical coatings - Part 4: Specific test methods: abrasion, adhesion and resistance to water
- ISO-9211-5 - Optics and photonics - Optical coatings - Part 5: Minimum requirements for antireflecting coatings
- ISO-9211-6 - Optics and photonics - Optical coatings - Part 6: Minimum requirements for reflecting coatings
- ISO-9211-7 - Optics and photonics - Optical coatings - Part 7: Minimum requirements for neutral beam splitter coatings
- ISO-9211-8 - Optics and photonics - Optical coatings - Part 8: Minimum requirements for coatings used for laser optics
- ISO-9336-3 - Optics and photonics - Optical transfer function - Application - Part 3: Telescopes
- ISO-9344 - Microscopes - Graticules for eyepieces
- ISO-9345 - Microscopes. Interfacing dimensions for imaging components
- ISO-9345-1 - Microscopes - Imaging distances related to mechanical reference planes - Part 1: Tube length 160 mm
- ISO-9345-2 - Microscopes - Imaging distances related to mechanical reference planes - Part 2: Infinity-corrected optical systems
- ISO-9358 - Optics and optical instruments -- Veiling glare of image forming systems -- Definitions and methods of measurement
Other SDOs:
- DIN-ISO-10109-1 - Optics and photonics - Environmental requirements - Part 1: General overview, terms and definitions, climatic zones and their parameters
- DIN-ISO-10109-11 - Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use
- DIN-ISO-10109-12 - Optics and optical instruments - Environmental requirements - Part 12: Conditions of transport for optical instruments
- DIN-ISO-10109-6 - Optics and photonics - Environmental requirements - Part 6: Test requirements for medical optical instruments
- DIN-ISO-10109-7 - Optics and optical instruments - Environmental requirements - Part 7: Test requirements for optical measuring systems
- DIN-ISO-10109-8 - Optics and photonics - Environmental requirements - Part 8: Test requirements for extreme conditions of use
- DIN-ISO-10110-10 - Part 10: Table Representing Data of Optical Elements & Cemented Assemblies, Optics & P
- DIN-ISO-10110-14 - Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance
- DIN-ISO-10110-17 - Part 17: Laser Irradiation Damage Threshold, Optics & Photonics, Preparation of Drawin
- DIN-ISO-11421 - Optics & Optical Instruments - Accuracy of Optical Transfer Function (Otf) Measuremen
- DIN-ISO-12844 - Raw Optical Glass - Grindability With Diamond Pellets - Test Method & Classification
- DIN-ISO-12853 - Optics & Optical Instruments, Microscopes, Information Provided To the User
- DIN-ISO-14133-1 - Optics and optical instruments - Specifications for binoculars, monoculars and spotting scopes - Part 1: General purpose instruments
- DIN-ISO-14133-2 - Optics and optical instruments - Specifications for binoculars, monoculars and spotting scopes - Part 2: High performance instruments
- DIN-ISO-14135-1 - Part 1: General-Purpose Instruments, Optics & Optical Instruments, Specifications For
- DIN-ISO-14135-2 - Optics and photonics - Specifications for telescopic sights - Part 2: High-performance instruments
- DIN-ISO-14490-1 - Part 1: Test Methods for Basic Characteristics, Optics & Optical Instruments - Test Me
- DIN-ISO-14490-2 - Part 2: Test Methods for Binocular Systems, Optics & Optical Instruments - Optics & Op
- DIN-ISO-14490-3 - Optics and photonics - Test methods for telescopic systems - Part 3: Test methods for telescopic sights
- DIN-ISO-14490-5 - Part 5: Test Methods for Transmittance, Optics & Optical Instruments - Test Methods Fo
- DIN-ISO-14490-6 - Optics and photonics - Test methods for telescopic systems - Part 6: Test methods for veiling glare index
- DIN-ISO-14490-7 - Optics and photonics - Test methods for telescopic systems - Part 7: Test methods for limit of resolution
- DIN-ISO-15795 - Optics & Photonics - Quality Evaluation of Optical Systems - Assessing the Image Quali
- DIN-ISO-8038-1 - Part 1: Screw Thread Type Rms 4/5 in X 1/36 in), Optics & Optical Instruments - Micros
- DIN-ISO-8038-2 - Part 2: Screw Thread Type m25 X 0,75 mm, Optics & Optical Instruments - Microscopes -
- DIN-ISO-9022-2 - Optics and photonics - Environmental test methods - Part 2: Cold, heat and humidity
- DIN-ISO-9022-4 - Optics and photonics - Environmental test methods - Part 4: Salt mist
- DIN-ISO-9022-7 - Optics and photonics - Environmental test methods - Part 7: Resistance to drip or rain
- DIN-ISO-9335 - Optics and photonics - Optical transfer function - Principles and procedures of measurement
- DIN-ISO-9345-2 - Part 2: Infinity-Corrected Optical Systems, Optics & Optical Instruments, Microscopes
- JIS-B-7141 - Microscopes -- Screw threads for objectives and related nosepieces
- JIS-K-0132 - General rules for scanning electron microscopy
- SS-EN-ISO-11670 - Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003)
- SS-EN-ISO-12005 - Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:2022)
- SS-EN-ISO-13695 - Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers (ISO 13695:2004)
- SS-EN-ISO-13696 - Optics and photonics - Test method for total scattering by optical components (ISO 13696:2022)